blob: bd8ac533a504d96521507df11795d9e0cd032118 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/**
2 * @file arch/alpha/oprofile/common.c
3 *
4 * @remark Copyright 2002 OProfile authors
5 * @remark Read the file COPYING
6 *
7 * @author Richard Henderson <rth@twiddle.net>
8 */
9
10#include <linux/oprofile.h>
11#include <linux/init.h>
12#include <linux/smp.h>
13#include <linux/errno.h>
14#include <asm/ptrace.h>
15#include <asm/system.h>
16
17#include "op_impl.h"
18
19extern struct op_axp_model op_model_ev4 __attribute__((weak));
20extern struct op_axp_model op_model_ev5 __attribute__((weak));
21extern struct op_axp_model op_model_pca56 __attribute__((weak));
22extern struct op_axp_model op_model_ev6 __attribute__((weak));
23extern struct op_axp_model op_model_ev67 __attribute__((weak));
24
25static struct op_axp_model *model;
26
27extern void (*perf_irq)(unsigned long, struct pt_regs *);
28static void (*save_perf_irq)(unsigned long, struct pt_regs *);
29
30static struct op_counter_config ctr[20];
31static struct op_system_config sys;
32static struct op_register_config reg;
33
34/* Called from do_entInt to handle the performance monitor interrupt. */
35
36static void
37op_handle_interrupt(unsigned long which, struct pt_regs *regs)
38{
39 model->handle_interrupt(which, regs, ctr);
40
41 /* If the user has selected an interrupt frequency that is
42 not exactly the width of the counter, write a new value
43 into the counter such that it'll overflow after N more
44 events. */
45 if ((reg.need_reset >> which) & 1)
46 model->reset_ctr(&reg, which);
47}
48
49static int
50op_axp_setup(void)
51{
52 unsigned long i, e;
53
54 /* Install our interrupt handler into the existing hook. */
55 save_perf_irq = perf_irq;
56 perf_irq = op_handle_interrupt;
57
58 /* Compute the mask of enabled counters. */
59 for (i = e = 0; i < model->num_counters; ++i)
60 if (ctr[i].enabled)
61 e |= 1 << i;
62 reg.enable = e;
63
64 /* Pre-compute the values to stuff in the hardware registers. */
65 model->reg_setup(&reg, ctr, &sys);
66
67 /* Configure the registers on all cpus. */
Jens Axboe8691e5a2008-06-06 11:18:06 +020068 (void)smp_call_function(model->cpu_setup, &reg, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 model->cpu_setup(&reg);
70 return 0;
71}
72
73static void
74op_axp_shutdown(void)
75{
76 /* Remove our interrupt handler. We may be removing this module. */
77 perf_irq = save_perf_irq;
78}
79
80static void
81op_axp_cpu_start(void *dummy)
82{
83 wrperfmon(1, reg.enable);
84}
85
86static int
87op_axp_start(void)
88{
Jens Axboe8691e5a2008-06-06 11:18:06 +020089 (void)smp_call_function(op_axp_cpu_start, NULL, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -070090 op_axp_cpu_start(NULL);
91 return 0;
92}
93
94static inline void
95op_axp_cpu_stop(void *dummy)
96{
97 /* Disable performance monitoring for all counters. */
98 wrperfmon(0, -1);
99}
100
101static void
102op_axp_stop(void)
103{
Jens Axboe8691e5a2008-06-06 11:18:06 +0200104 (void)smp_call_function(op_axp_cpu_stop, NULL, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105 op_axp_cpu_stop(NULL);
106}
107
108static int
Robert Richter25ad29132008-09-05 17:12:36 +0200109op_axp_create_files(struct super_block *sb, struct dentry *root)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700110{
111 int i;
112
113 for (i = 0; i < model->num_counters; ++i) {
114 struct dentry *dir;
Markus Armbruster0c6856f2006-06-26 00:24:34 -0700115 char buf[4];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116
117 snprintf(buf, sizeof buf, "%d", i);
118 dir = oprofilefs_mkdir(sb, root, buf);
119
120 oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
121 oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
122 oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
123 /* Dummies. */
124 oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
125 oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
126 oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
127 }
128
129 if (model->can_set_proc_mode) {
130 oprofilefs_create_ulong(sb, root, "enable_pal",
131 &sys.enable_pal);
132 oprofilefs_create_ulong(sb, root, "enable_kernel",
133 &sys.enable_kernel);
134 oprofilefs_create_ulong(sb, root, "enable_user",
135 &sys.enable_user);
136 }
137
138 return 0;
139}
140
141int __init
142oprofile_arch_init(struct oprofile_operations *ops)
143{
144 struct op_axp_model *lmodel = NULL;
145
146 switch (implver()) {
147 case IMPLVER_EV4:
148 lmodel = &op_model_ev4;
149 break;
150 case IMPLVER_EV5:
151 /* 21164PC has a slightly different set of events.
152 Recognize the chip by the presence of the MAX insns. */
153 if (!amask(AMASK_MAX))
154 lmodel = &op_model_pca56;
155 else
156 lmodel = &op_model_ev5;
157 break;
158 case IMPLVER_EV6:
159 /* 21264A supports ProfileMe.
160 Recognize the chip by the presence of the CIX insns. */
161 if (!amask(AMASK_CIX))
162 lmodel = &op_model_ev67;
163 else
164 lmodel = &op_model_ev6;
165 break;
166 }
167
168 if (!lmodel)
169 return -ENODEV;
170 model = lmodel;
171
172 ops->create_files = op_axp_create_files;
173 ops->setup = op_axp_setup;
174 ops->shutdown = op_axp_shutdown;
175 ops->start = op_axp_start;
176 ops->stop = op_axp_stop;
177 ops->cpu_type = lmodel->cpu_type;
178
179 printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
180 lmodel->cpu_type);
181
182 return 0;
183}
184
185
186void
187oprofile_arch_exit(void)
188{
189}