blob: 4eb3da996b369518edb0a1efa924f5c97657a614 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* -*-linux-c-*-
2
3 * vendor-specific code for SCSI CD-ROM's goes here.
4 *
5 * This is needed becauce most of the new features (multisession and
6 * the like) are too new to be included into the SCSI-II standard (to
7 * be exact: there is'nt anything in my draft copy).
8 *
9 * Aug 1997: Ha! Got a SCSI-3 cdrom spec across my fingers. SCSI-3 does
10 * multisession using the READ TOC command (like SONY).
11 *
12 * Rearranged stuff here: SCSI-3 is included allways, support
13 * for NEC/TOSHIBA/HP commands is optional.
14 *
15 * Gerd Knorr <kraxel@cs.tu-berlin.de>
16 *
17 * --------------------------------------------------------------------------
18 *
19 * support for XA/multisession-CD's
20 *
21 * - NEC: Detection and support of multisession CD's.
22 *
23 * - TOSHIBA: Detection and support of multisession CD's.
24 * Some XA-Sector tweaking, required for older drives.
25 *
26 * - SONY: Detection and support of multisession CD's.
27 * added by Thomas Quinot <thomas@cuivre.freenix.fr>
28 *
29 * - PIONEER, HITACHI, PLEXTOR, MATSHITA, TEAC, PHILIPS: known to
30 * work with SONY (SCSI3 now) code.
31 *
32 * - HP: Much like SONY, but a little different... (Thomas)
33 * HP-Writers only ??? Maybe other CD-Writers work with this too ?
34 * HP 6020 writers now supported.
35 */
36
Linus Torvalds1da177e2005-04-16 15:20:36 -070037#include <linux/cdrom.h>
38#include <linux/errno.h>
39#include <linux/string.h>
40#include <linux/bcd.h>
41#include <linux/blkdev.h>
42
43#include <scsi/scsi.h>
44#include <scsi/scsi_cmnd.h>
45#include <scsi/scsi_device.h>
46#include <scsi/scsi_host.h>
47#include <scsi/scsi_ioctl.h>
48
49#include "sr.h"
50
51#if 0
52#define DEBUG
53#endif
54
55/* here are some constants to sort the vendors into groups */
56
57#define VENDOR_SCSI3 1 /* default: scsi-3 mmc */
58
59#define VENDOR_NEC 2
60#define VENDOR_TOSHIBA 3
61#define VENDOR_WRITER 4 /* pre-scsi3 writers */
62
63#define VENDOR_TIMEOUT 30*HZ
64
65void sr_vendor_init(Scsi_CD *cd)
66{
67#ifndef CONFIG_BLK_DEV_SR_VENDOR
68 cd->vendor = VENDOR_SCSI3;
69#else
Matthew Wilcox7b32b8e2005-12-16 21:11:37 -070070 const char *vendor = cd->device->vendor;
71 const char *model = cd->device->model;
Linus Torvalds1da177e2005-04-16 15:20:36 -070072
73 /* default */
74 cd->vendor = VENDOR_SCSI3;
75 if (cd->readcd_known)
76 /* this is true for scsi3/mmc drives - no more checks */
77 return;
78
79 if (cd->device->type == TYPE_WORM) {
80 cd->vendor = VENDOR_WRITER;
81
82 } else if (!strncmp(vendor, "NEC", 3)) {
83 cd->vendor = VENDOR_NEC;
84 if (!strncmp(model, "CD-ROM DRIVE:25", 15) ||
85 !strncmp(model, "CD-ROM DRIVE:36", 15) ||
86 !strncmp(model, "CD-ROM DRIVE:83", 15) ||
87 !strncmp(model, "CD-ROM DRIVE:84 ", 16)
88#if 0
89 /* my NEC 3x returns the read-raw data if a read-raw
90 is followed by a read for the same sector - aeb */
91 || !strncmp(model, "CD-ROM DRIVE:500", 16)
92#endif
93 )
94 /* these can't handle multisession, may hang */
95 cd->cdi.mask |= CDC_MULTI_SESSION;
96
97 } else if (!strncmp(vendor, "TOSHIBA", 7)) {
98 cd->vendor = VENDOR_TOSHIBA;
99
100 }
101#endif
102}
103
104
105/* small handy function for switching block length using MODE SELECT,
106 * used by sr_read_sector() */
107
108int sr_set_blocklength(Scsi_CD *cd, int blocklength)
109{
110 unsigned char *buffer; /* the buffer for the ioctl */
111 struct packet_command cgc;
112 struct ccs_modesel_head *modesel;
113 int rc, density = 0;
114
115#ifdef CONFIG_BLK_DEV_SR_VENDOR
116 if (cd->vendor == VENDOR_TOSHIBA)
117 density = (blocklength > 2048) ? 0x81 : 0x83;
118#endif
119
Robert P. J. Day5cbded52006-12-13 00:35:56 -0800120 buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121 if (!buffer)
122 return -ENOMEM;
123
124#ifdef DEBUG
125 printk("%s: MODE SELECT 0x%x/%d\n", cd->cdi.name, density, blocklength);
126#endif
127 memset(&cgc, 0, sizeof(struct packet_command));
128 cgc.cmd[0] = MODE_SELECT;
129 cgc.cmd[1] = (1 << 4);
130 cgc.cmd[4] = 12;
131 modesel = (struct ccs_modesel_head *) buffer;
132 memset(modesel, 0, sizeof(*modesel));
133 modesel->block_desc_length = 0x08;
134 modesel->density = density;
135 modesel->block_length_med = (blocklength >> 8) & 0xff;
136 modesel->block_length_lo = blocklength & 0xff;
137 cgc.buffer = buffer;
138 cgc.buflen = sizeof(*modesel);
139 cgc.data_direction = DMA_TO_DEVICE;
140 cgc.timeout = VENDOR_TIMEOUT;
141 if (0 == (rc = sr_do_ioctl(cd, &cgc))) {
142 cd->device->sector_size = blocklength;
143 }
144#ifdef DEBUG
145 else
146 printk("%s: switching blocklength to %d bytes failed\n",
147 cd->cdi.name, blocklength);
148#endif
149 kfree(buffer);
150 return rc;
151}
152
153/* This function gets called after a media change. Checks if the CD is
154 multisession, asks for offset etc. */
155
156int sr_cd_check(struct cdrom_device_info *cdi)
157{
158 Scsi_CD *cd = cdi->handle;
159 unsigned long sector;
160 unsigned char *buffer; /* the buffer for the ioctl */
161 struct packet_command cgc;
162 int rc, no_multi;
163
164 if (cd->cdi.mask & CDC_MULTI_SESSION)
165 return 0;
166
Robert P. J. Day5cbded52006-12-13 00:35:56 -0800167 buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168 if (!buffer)
169 return -ENOMEM;
170
171 sector = 0; /* the multisession sector offset goes here */
172 no_multi = 0; /* flag: the drive can't handle multisession */
173 rc = 0;
174
175 memset(&cgc, 0, sizeof(struct packet_command));
176
177 switch (cd->vendor) {
178
179 case VENDOR_SCSI3:
180 cgc.cmd[0] = READ_TOC;
181 cgc.cmd[8] = 12;
182 cgc.cmd[9] = 0x40;
183 cgc.buffer = buffer;
184 cgc.buflen = 12;
185 cgc.quiet = 1;
186 cgc.data_direction = DMA_FROM_DEVICE;
187 cgc.timeout = VENDOR_TIMEOUT;
188 rc = sr_do_ioctl(cd, &cgc);
189 if (rc != 0)
190 break;
191 if ((buffer[0] << 8) + buffer[1] < 0x0a) {
192 printk(KERN_INFO "%s: Hmm, seems the drive "
193 "doesn't support multisession CD's\n", cd->cdi.name);
194 no_multi = 1;
195 break;
196 }
197 sector = buffer[11] + (buffer[10] << 8) +
198 (buffer[9] << 16) + (buffer[8] << 24);
199 if (buffer[6] <= 1) {
200 /* ignore sector offsets from first track */
201 sector = 0;
202 }
203 break;
204
205#ifdef CONFIG_BLK_DEV_SR_VENDOR
206 case VENDOR_NEC:{
207 unsigned long min, sec, frame;
208 cgc.cmd[0] = 0xde;
209 cgc.cmd[1] = 0x03;
210 cgc.cmd[2] = 0xb0;
211 cgc.buffer = buffer;
212 cgc.buflen = 0x16;
213 cgc.quiet = 1;
214 cgc.data_direction = DMA_FROM_DEVICE;
215 cgc.timeout = VENDOR_TIMEOUT;
216 rc = sr_do_ioctl(cd, &cgc);
217 if (rc != 0)
218 break;
219 if (buffer[14] != 0 && buffer[14] != 0xb0) {
220 printk(KERN_INFO "%s: Hmm, seems the cdrom "
221 "doesn't support multisession CD's\n",
222 cd->cdi.name);
223 no_multi = 1;
224 break;
225 }
226 min = BCD2BIN(buffer[15]);
227 sec = BCD2BIN(buffer[16]);
228 frame = BCD2BIN(buffer[17]);
229 sector = min * CD_SECS * CD_FRAMES + sec * CD_FRAMES + frame;
230 break;
231 }
232
233 case VENDOR_TOSHIBA:{
234 unsigned long min, sec, frame;
235
236 /* we request some disc information (is it a XA-CD ?,
237 * where starts the last session ?) */
238 cgc.cmd[0] = 0xc7;
239 cgc.cmd[1] = 0x03;
240 cgc.buffer = buffer;
241 cgc.buflen = 4;
242 cgc.quiet = 1;
243 cgc.data_direction = DMA_FROM_DEVICE;
244 cgc.timeout = VENDOR_TIMEOUT;
245 rc = sr_do_ioctl(cd, &cgc);
246 if (rc == -EINVAL) {
247 printk(KERN_INFO "%s: Hmm, seems the drive "
248 "doesn't support multisession CD's\n",
249 cd->cdi.name);
250 no_multi = 1;
251 break;
252 }
253 if (rc != 0)
254 break;
255 min = BCD2BIN(buffer[1]);
256 sec = BCD2BIN(buffer[2]);
257 frame = BCD2BIN(buffer[3]);
258 sector = min * CD_SECS * CD_FRAMES + sec * CD_FRAMES + frame;
259 if (sector)
260 sector -= CD_MSF_OFFSET;
261 sr_set_blocklength(cd, 2048);
262 break;
263 }
264
265 case VENDOR_WRITER:
266 cgc.cmd[0] = READ_TOC;
267 cgc.cmd[8] = 0x04;
268 cgc.cmd[9] = 0x40;
269 cgc.buffer = buffer;
270 cgc.buflen = 0x04;
271 cgc.quiet = 1;
272 cgc.data_direction = DMA_FROM_DEVICE;
273 cgc.timeout = VENDOR_TIMEOUT;
274 rc = sr_do_ioctl(cd, &cgc);
275 if (rc != 0) {
276 break;
277 }
278 if ((rc = buffer[2]) == 0) {
279 printk(KERN_WARNING
280 "%s: No finished session\n", cd->cdi.name);
281 break;
282 }
283 cgc.cmd[0] = READ_TOC; /* Read TOC */
284 cgc.cmd[6] = rc & 0x7f; /* number of last session */
285 cgc.cmd[8] = 0x0c;
286 cgc.cmd[9] = 0x40;
287 cgc.buffer = buffer;
288 cgc.buflen = 12;
289 cgc.quiet = 1;
290 cgc.data_direction = DMA_FROM_DEVICE;
291 cgc.timeout = VENDOR_TIMEOUT;
292 rc = sr_do_ioctl(cd, &cgc);
293 if (rc != 0) {
294 break;
295 }
296 sector = buffer[11] + (buffer[10] << 8) +
297 (buffer[9] << 16) + (buffer[8] << 24);
298 break;
299#endif /* CONFIG_BLK_DEV_SR_VENDOR */
300
301 default:
302 /* should not happen */
303 printk(KERN_WARNING
304 "%s: unknown vendor code (%i), not initialized ?\n",
305 cd->cdi.name, cd->vendor);
306 sector = 0;
307 no_multi = 1;
308 break;
309 }
310 cd->ms_offset = sector;
311 cd->xa_flag = 0;
312 if (CDS_AUDIO != sr_disk_status(cdi) && 1 == sr_is_xa(cd))
313 cd->xa_flag = 1;
314
315 if (2048 != cd->device->sector_size) {
316 sr_set_blocklength(cd, 2048);
317 }
318 if (no_multi)
319 cdi->mask |= CDC_MULTI_SESSION;
320
321#ifdef DEBUG
322 if (sector)
323 printk(KERN_DEBUG "%s: multisession offset=%lu\n",
324 cd->cdi.name, sector);
325#endif
326 kfree(buffer);
327 return rc;
328}