Philippe Reynes | 4729889 | 2014-07-25 22:43:00 +0100 | [diff] [blame] | 1 | /* |
| 2 | * iio/dac/max5821.c |
| 3 | * Copyright (C) 2014 Philippe Reynes |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * published by the Free Software Foundation. |
| 8 | */ |
| 9 | |
| 10 | #include <linux/kernel.h> |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/i2c.h> |
| 13 | #include <linux/iio/iio.h> |
| 14 | #include <linux/regulator/consumer.h> |
| 15 | |
| 16 | #define MAX5821_MAX_DAC_CHANNELS 2 |
| 17 | |
| 18 | /* command bytes */ |
| 19 | #define MAX5821_LOAD_DAC_A_IN_REG_B 0x00 |
| 20 | #define MAX5821_LOAD_DAC_B_IN_REG_A 0x10 |
| 21 | #define MAX5821_EXTENDED_COMMAND_MODE 0xf0 |
| 22 | #define MAX5821_READ_DAC_A_COMMAND 0xf1 |
| 23 | #define MAX5821_READ_DAC_B_COMMAND 0xf2 |
| 24 | |
| 25 | #define MAX5821_EXTENDED_POWER_UP 0x00 |
| 26 | #define MAX5821_EXTENDED_POWER_DOWN_MODE0 0x01 |
| 27 | #define MAX5821_EXTENDED_POWER_DOWN_MODE1 0x02 |
| 28 | #define MAX5821_EXTENDED_POWER_DOWN_MODE2 0x03 |
| 29 | #define MAX5821_EXTENDED_DAC_A 0x04 |
| 30 | #define MAX5821_EXTENDED_DAC_B 0x08 |
| 31 | |
| 32 | enum max5821_device_ids { |
| 33 | ID_MAX5821, |
| 34 | }; |
| 35 | |
| 36 | struct max5821_data { |
| 37 | struct i2c_client *client; |
| 38 | struct regulator *vref_reg; |
| 39 | unsigned short vref_mv; |
| 40 | bool powerdown[MAX5821_MAX_DAC_CHANNELS]; |
| 41 | u8 powerdown_mode[MAX5821_MAX_DAC_CHANNELS]; |
| 42 | struct mutex lock; |
| 43 | }; |
| 44 | |
| 45 | static const char * const max5821_powerdown_modes[] = { |
| 46 | "three_state", |
| 47 | "1kohm_to_gnd", |
| 48 | "100kohm_to_gnd", |
| 49 | }; |
| 50 | |
| 51 | enum { |
| 52 | MAX5821_THREE_STATE, |
| 53 | MAX5821_1KOHM_TO_GND, |
| 54 | MAX5821_100KOHM_TO_GND |
| 55 | }; |
| 56 | |
| 57 | static int max5821_get_powerdown_mode(struct iio_dev *indio_dev, |
| 58 | const struct iio_chan_spec *chan) |
| 59 | { |
| 60 | struct max5821_data *st = iio_priv(indio_dev); |
| 61 | |
| 62 | return st->powerdown_mode[chan->channel]; |
| 63 | } |
| 64 | |
| 65 | static int max5821_set_powerdown_mode(struct iio_dev *indio_dev, |
| 66 | const struct iio_chan_spec *chan, |
| 67 | unsigned int mode) |
| 68 | { |
| 69 | struct max5821_data *st = iio_priv(indio_dev); |
| 70 | |
| 71 | st->powerdown_mode[chan->channel] = mode; |
| 72 | |
| 73 | return 0; |
| 74 | } |
| 75 | |
| 76 | static const struct iio_enum max5821_powerdown_mode_enum = { |
| 77 | .items = max5821_powerdown_modes, |
| 78 | .num_items = ARRAY_SIZE(max5821_powerdown_modes), |
| 79 | .get = max5821_get_powerdown_mode, |
| 80 | .set = max5821_set_powerdown_mode, |
| 81 | }; |
| 82 | |
| 83 | static ssize_t max5821_read_dac_powerdown(struct iio_dev *indio_dev, |
| 84 | uintptr_t private, |
| 85 | const struct iio_chan_spec *chan, |
| 86 | char *buf) |
| 87 | { |
| 88 | struct max5821_data *st = iio_priv(indio_dev); |
| 89 | |
| 90 | return sprintf(buf, "%d\n", st->powerdown[chan->channel]); |
| 91 | } |
| 92 | |
| 93 | static int max5821_sync_powerdown_mode(struct max5821_data *data, |
| 94 | const struct iio_chan_spec *chan) |
| 95 | { |
| 96 | u8 outbuf[2]; |
| 97 | |
| 98 | outbuf[0] = MAX5821_EXTENDED_COMMAND_MODE; |
| 99 | |
| 100 | if (chan->channel == 0) |
| 101 | outbuf[1] = MAX5821_EXTENDED_DAC_A; |
| 102 | else |
| 103 | outbuf[1] = MAX5821_EXTENDED_DAC_B; |
| 104 | |
| 105 | if (data->powerdown[chan->channel]) |
| 106 | outbuf[1] |= data->powerdown_mode[chan->channel] + 1; |
| 107 | else |
| 108 | outbuf[1] |= MAX5821_EXTENDED_POWER_UP; |
| 109 | |
| 110 | return i2c_master_send(data->client, outbuf, 2); |
| 111 | } |
| 112 | |
| 113 | static ssize_t max5821_write_dac_powerdown(struct iio_dev *indio_dev, |
| 114 | uintptr_t private, |
| 115 | const struct iio_chan_spec *chan, |
| 116 | const char *buf, size_t len) |
| 117 | { |
| 118 | struct max5821_data *data = iio_priv(indio_dev); |
| 119 | bool powerdown; |
| 120 | int ret; |
| 121 | |
| 122 | ret = strtobool(buf, &powerdown); |
| 123 | if (ret) |
| 124 | return ret; |
| 125 | |
| 126 | data->powerdown[chan->channel] = powerdown; |
| 127 | |
| 128 | ret = max5821_sync_powerdown_mode(data, chan); |
| 129 | if (ret < 0) |
| 130 | return ret; |
| 131 | |
| 132 | return len; |
| 133 | } |
| 134 | |
| 135 | static const struct iio_chan_spec_ext_info max5821_ext_info[] = { |
| 136 | { |
| 137 | .name = "powerdown", |
| 138 | .read = max5821_read_dac_powerdown, |
| 139 | .write = max5821_write_dac_powerdown, |
| 140 | .shared = IIO_SEPARATE, |
| 141 | }, |
| 142 | IIO_ENUM("powerdown_mode", IIO_SEPARATE, &max5821_powerdown_mode_enum), |
| 143 | IIO_ENUM_AVAILABLE("powerdown_mode", &max5821_powerdown_mode_enum), |
| 144 | { }, |
| 145 | }; |
| 146 | |
| 147 | #define MAX5821_CHANNEL(chan) { \ |
| 148 | .type = IIO_VOLTAGE, \ |
| 149 | .indexed = 1, \ |
| 150 | .output = 1, \ |
| 151 | .channel = (chan), \ |
| 152 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| 153 | .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ |
| 154 | .ext_info = max5821_ext_info, \ |
| 155 | } |
| 156 | |
| 157 | static const struct iio_chan_spec max5821_channels[] = { |
| 158 | MAX5821_CHANNEL(0), |
| 159 | MAX5821_CHANNEL(1) |
| 160 | }; |
| 161 | |
| 162 | static const u8 max5821_read_dac_command[] = { |
| 163 | MAX5821_READ_DAC_A_COMMAND, |
| 164 | MAX5821_READ_DAC_B_COMMAND |
| 165 | }; |
| 166 | |
| 167 | static const u8 max5821_load_dac_command[] = { |
| 168 | MAX5821_LOAD_DAC_A_IN_REG_B, |
| 169 | MAX5821_LOAD_DAC_B_IN_REG_A |
| 170 | }; |
| 171 | |
| 172 | static int max5821_get_value(struct iio_dev *indio_dev, |
| 173 | int *val, int channel) |
| 174 | { |
| 175 | struct max5821_data *data = iio_priv(indio_dev); |
| 176 | struct i2c_client *client = data->client; |
| 177 | u8 outbuf[1]; |
| 178 | u8 inbuf[2]; |
| 179 | int ret; |
| 180 | |
| 181 | if ((channel != 0) && (channel != 1)) |
| 182 | return -EINVAL; |
| 183 | |
| 184 | outbuf[0] = max5821_read_dac_command[channel]; |
| 185 | |
| 186 | mutex_lock(&data->lock); |
| 187 | |
| 188 | ret = i2c_master_send(client, outbuf, 1); |
| 189 | if (ret < 0) { |
| 190 | mutex_unlock(&data->lock); |
| 191 | return ret; |
| 192 | } else if (ret != 1) { |
| 193 | mutex_unlock(&data->lock); |
| 194 | return -EIO; |
| 195 | } |
| 196 | |
| 197 | ret = i2c_master_recv(client, inbuf, 2); |
| 198 | if (ret < 0) { |
| 199 | mutex_unlock(&data->lock); |
| 200 | return ret; |
| 201 | } else if (ret != 2) { |
| 202 | mutex_unlock(&data->lock); |
| 203 | return -EIO; |
| 204 | } |
| 205 | |
| 206 | mutex_unlock(&data->lock); |
| 207 | |
| 208 | *val = ((inbuf[0] & 0x0f) << 6) | (inbuf[1] >> 2); |
| 209 | |
| 210 | return IIO_VAL_INT; |
| 211 | } |
| 212 | |
| 213 | static int max5821_set_value(struct iio_dev *indio_dev, |
| 214 | int val, int channel) |
| 215 | { |
| 216 | struct max5821_data *data = iio_priv(indio_dev); |
| 217 | struct i2c_client *client = data->client; |
| 218 | u8 outbuf[2]; |
| 219 | int ret; |
| 220 | |
| 221 | if ((val < 0) || (val > 1023)) |
| 222 | return -EINVAL; |
| 223 | |
| 224 | if ((channel != 0) && (channel != 1)) |
| 225 | return -EINVAL; |
| 226 | |
| 227 | outbuf[0] = max5821_load_dac_command[channel]; |
| 228 | outbuf[0] |= val >> 6; |
| 229 | outbuf[1] = (val & 0x3f) << 2; |
| 230 | |
| 231 | ret = i2c_master_send(client, outbuf, 2); |
| 232 | if (ret < 0) |
| 233 | return ret; |
| 234 | else if (ret != 2) |
| 235 | return -EIO; |
| 236 | else |
| 237 | return 0; |
| 238 | } |
| 239 | |
| 240 | static int max5821_read_raw(struct iio_dev *indio_dev, |
| 241 | struct iio_chan_spec const *chan, |
| 242 | int *val, int *val2, long mask) |
| 243 | { |
| 244 | struct max5821_data *data = iio_priv(indio_dev); |
| 245 | |
| 246 | switch (mask) { |
| 247 | case IIO_CHAN_INFO_RAW: |
| 248 | return max5821_get_value(indio_dev, val, chan->channel); |
| 249 | case IIO_CHAN_INFO_SCALE: |
| 250 | *val = data->vref_mv; |
| 251 | *val2 = 10; |
| 252 | return IIO_VAL_FRACTIONAL_LOG2; |
| 253 | default: |
| 254 | return -EINVAL; |
| 255 | } |
| 256 | } |
| 257 | |
| 258 | static int max5821_write_raw(struct iio_dev *indio_dev, |
| 259 | struct iio_chan_spec const *chan, |
| 260 | int val, int val2, long mask) |
| 261 | { |
| 262 | if (val2 != 0) |
| 263 | return -EINVAL; |
| 264 | |
| 265 | switch (mask) { |
| 266 | case IIO_CHAN_INFO_RAW: |
| 267 | return max5821_set_value(indio_dev, val, chan->channel); |
| 268 | default: |
| 269 | return -EINVAL; |
| 270 | } |
| 271 | } |
| 272 | |
| 273 | #ifdef CONFIG_PM_SLEEP |
| 274 | static int max5821_suspend(struct device *dev) |
| 275 | { |
| 276 | u8 outbuf[2] = { MAX5821_EXTENDED_COMMAND_MODE, |
| 277 | MAX5821_EXTENDED_DAC_A | |
| 278 | MAX5821_EXTENDED_DAC_B | |
| 279 | MAX5821_EXTENDED_POWER_DOWN_MODE2 }; |
| 280 | |
| 281 | return i2c_master_send(to_i2c_client(dev), outbuf, 2); |
| 282 | } |
| 283 | |
| 284 | static int max5821_resume(struct device *dev) |
| 285 | { |
| 286 | u8 outbuf[2] = { MAX5821_EXTENDED_COMMAND_MODE, |
| 287 | MAX5821_EXTENDED_DAC_A | |
| 288 | MAX5821_EXTENDED_DAC_B | |
| 289 | MAX5821_EXTENDED_POWER_UP }; |
| 290 | |
| 291 | return i2c_master_send(to_i2c_client(dev), outbuf, 2); |
| 292 | } |
| 293 | |
| 294 | static SIMPLE_DEV_PM_OPS(max5821_pm_ops, max5821_suspend, max5821_resume); |
| 295 | #define MAX5821_PM_OPS (&max5821_pm_ops) |
| 296 | #else |
| 297 | #define MAX5821_PM_OPS NULL |
| 298 | #endif /* CONFIG_PM_SLEEP */ |
| 299 | |
| 300 | static const struct iio_info max5821_info = { |
| 301 | .read_raw = max5821_read_raw, |
| 302 | .write_raw = max5821_write_raw, |
| 303 | .driver_module = THIS_MODULE, |
| 304 | }; |
| 305 | |
| 306 | static int max5821_probe(struct i2c_client *client, |
| 307 | const struct i2c_device_id *id) |
| 308 | { |
| 309 | struct max5821_data *data; |
| 310 | struct iio_dev *indio_dev; |
| 311 | u32 tmp; |
| 312 | int ret; |
| 313 | |
| 314 | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| 315 | if (!indio_dev) |
| 316 | return -ENOMEM; |
| 317 | data = iio_priv(indio_dev); |
| 318 | i2c_set_clientdata(client, indio_dev); |
| 319 | data->client = client; |
| 320 | mutex_init(&data->lock); |
| 321 | |
| 322 | /* max5821 start in powerdown mode 100Kohm to ground */ |
| 323 | for (tmp = 0; tmp < MAX5821_MAX_DAC_CHANNELS; tmp++) { |
| 324 | data->powerdown[tmp] = true; |
| 325 | data->powerdown_mode[tmp] = MAX5821_100KOHM_TO_GND; |
| 326 | } |
| 327 | |
| 328 | data->vref_reg = devm_regulator_get(&client->dev, "vref"); |
| 329 | if (IS_ERR(data->vref_reg)) { |
| 330 | ret = PTR_ERR(data->vref_reg); |
| 331 | dev_err(&client->dev, |
| 332 | "Failed to get vref regulator: %d\n", ret); |
| 333 | goto error_free_reg; |
| 334 | } |
| 335 | |
| 336 | ret = regulator_enable(data->vref_reg); |
| 337 | if (ret) { |
| 338 | dev_err(&client->dev, |
| 339 | "Failed to enable vref regulator: %d\n", ret); |
| 340 | goto error_free_reg; |
| 341 | } |
| 342 | |
| 343 | ret = regulator_get_voltage(data->vref_reg); |
| 344 | if (ret < 0) { |
| 345 | dev_err(&client->dev, |
| 346 | "Failed to get voltage on regulator: %d\n", ret); |
| 347 | goto error_disable_reg; |
| 348 | } |
| 349 | |
| 350 | data->vref_mv = ret / 1000; |
| 351 | |
| 352 | indio_dev->name = id->name; |
| 353 | indio_dev->dev.parent = &client->dev; |
| 354 | indio_dev->num_channels = ARRAY_SIZE(max5821_channels); |
| 355 | indio_dev->channels = max5821_channels; |
| 356 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 357 | indio_dev->info = &max5821_info; |
| 358 | |
| 359 | return iio_device_register(indio_dev); |
| 360 | |
| 361 | error_disable_reg: |
| 362 | regulator_disable(data->vref_reg); |
| 363 | |
| 364 | error_free_reg: |
| 365 | |
| 366 | return ret; |
| 367 | } |
| 368 | |
| 369 | static int max5821_remove(struct i2c_client *client) |
| 370 | { |
| 371 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 372 | struct max5821_data *data = iio_priv(indio_dev); |
| 373 | |
| 374 | iio_device_unregister(indio_dev); |
| 375 | regulator_disable(data->vref_reg); |
| 376 | |
| 377 | return 0; |
| 378 | } |
| 379 | |
| 380 | static const struct i2c_device_id max5821_id[] = { |
| 381 | { "max5821", ID_MAX5821 }, |
| 382 | { } |
| 383 | }; |
| 384 | MODULE_DEVICE_TABLE(i2c, max5821_id); |
| 385 | |
| 386 | static const struct of_device_id max5821_of_match[] = { |
| 387 | { .compatible = "maxim,max5821" }, |
| 388 | { } |
| 389 | }; |
Luis de Bethencourt | e09f56f | 2015-09-17 19:02:32 +0200 | [diff] [blame] | 390 | MODULE_DEVICE_TABLE(of, max5821_of_match); |
Philippe Reynes | 4729889 | 2014-07-25 22:43:00 +0100 | [diff] [blame] | 391 | |
| 392 | static struct i2c_driver max5821_driver = { |
| 393 | .driver = { |
| 394 | .name = "max5821", |
| 395 | .pm = MAX5821_PM_OPS, |
Philippe Reynes | 4729889 | 2014-07-25 22:43:00 +0100 | [diff] [blame] | 396 | }, |
| 397 | .probe = max5821_probe, |
| 398 | .remove = max5821_remove, |
| 399 | .id_table = max5821_id, |
| 400 | }; |
| 401 | module_i2c_driver(max5821_driver); |
| 402 | |
| 403 | MODULE_AUTHOR("Philippe Reynes <tremyfr@yahoo.fr>"); |
| 404 | MODULE_DESCRIPTION("MAX5821 DAC"); |
| 405 | MODULE_LICENSE("GPL v2"); |