blob: 4f2ba244689b40583f03f476252b592493f751e9 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 friq.c (c) 1998 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License
4
5 friq.c is a low-level protocol driver for the Freecom "IQ"
6 parallel port IDE adapter. Early versions of this adapter
7 use the 'frpw' protocol.
8
9 Freecom uses this adapter in a battery powered external
10 CD-ROM drive. It is also used in LS-120 drives by
11 Maxell and Panasonic, and other devices.
12
13 The battery powered drive requires software support to
14 control the power to the drive. This module enables the
15 drive power when the high level driver (pcd) is loaded
16 and disables it when the module is unloaded. Note, if
17 the friq module is built in to the kernel, the power
18 will never be switched off, so other means should be
19 used to conserve battery power.
20
21*/
22
23/* Changes:
24
25 1.01 GRG 1998.12.20 Added support for soft power switch
26*/
27
28#define FRIQ_VERSION "1.01"
29
30#include <linux/module.h>
31#include <linux/init.h>
32#include <linux/delay.h>
33#include <linux/kernel.h>
34#include <linux/types.h>
35#include <linux/wait.h>
36#include <asm/io.h>
37
38#include "paride.h"
39
40#define CMD(x) w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
41 w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
42
43#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
44
45/* cont = 0 - access the IDE register file
46 cont = 1 - access the IDE command set
47*/
48
49static int cont_map[2] = { 0x08, 0x10 };
50
51static int friq_read_regr( PIA *pi, int cont, int regr )
52
53{ int h,l,r;
54
55 r = regr + cont_map[cont];
56
57 CMD(r);
58 w2(6); l = r1();
59 w2(4); h = r1();
60 w2(4);
61
62 return j44(l,h);
63
64}
65
66static void friq_write_regr( PIA *pi, int cont, int regr, int val)
67
68{ int r;
69
70 r = regr + cont_map[cont];
71
72 CMD(r);
73 w0(val);
74 w2(5);w2(7);w2(5);w2(4);
75}
76
77static void friq_read_block_int( PIA *pi, char * buf, int count, int regr )
78
79{ int h, l, k, ph;
80
81 switch(pi->mode) {
82
83 case 0: CMD(regr);
84 for (k=0;k<count;k++) {
85 w2(6); l = r1();
86 w2(4); h = r1();
87 buf[k] = j44(l,h);
88 }
89 w2(4);
90 break;
91
92 case 1: ph = 2;
93 CMD(regr+0xc0);
94 w0(0xff);
95 for (k=0;k<count;k++) {
96 w2(0xa4 + ph);
97 buf[k] = r0();
98 ph = 2 - ph;
99 }
100 w2(0xac); w2(0xa4); w2(4);
101 break;
102
103 case 2: CMD(regr+0x80);
104 for (k=0;k<count-2;k++) buf[k] = r4();
105 w2(0xac); w2(0xa4);
106 buf[count-2] = r4();
107 buf[count-1] = r4();
108 w2(4);
109 break;
110
111 case 3: CMD(regr+0x80);
112 for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
113 w2(0xac); w2(0xa4);
114 buf[count-2] = r4();
115 buf[count-1] = r4();
116 w2(4);
117 break;
118
119 case 4: CMD(regr+0x80);
120 for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
121 buf[count-4] = r4();
122 buf[count-3] = r4();
123 w2(0xac); w2(0xa4);
124 buf[count-2] = r4();
125 buf[count-1] = r4();
126 w2(4);
127 break;
128
129 }
130}
131
132static void friq_read_block( PIA *pi, char * buf, int count)
133
134{ friq_read_block_int(pi,buf,count,0x08);
135}
136
137static void friq_write_block( PIA *pi, char * buf, int count )
138
139{ int k;
140
141 switch(pi->mode) {
142
143 case 0:
144 case 1: CMD(8); w2(5);
145 for (k=0;k<count;k++) {
146 w0(buf[k]);
147 w2(7);w2(5);
148 }
149 w2(4);
150 break;
151
152 case 2: CMD(0xc8); w2(5);
153 for (k=0;k<count;k++) w4(buf[k]);
154 w2(4);
155 break;
156
157 case 3: CMD(0xc8); w2(5);
158 for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
159 w2(4);
160 break;
161
162 case 4: CMD(0xc8); w2(5);
163 for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
164 w2(4);
165 break;
166 }
167}
168
169static void friq_connect ( PIA *pi )
170
171{ pi->saved_r0 = r0();
172 pi->saved_r2 = r2();
173 w2(4);
174}
175
176static void friq_disconnect ( PIA *pi )
177
178{ CMD(0x20);
179 w0(pi->saved_r0);
180 w2(pi->saved_r2);
181}
182
183static int friq_test_proto( PIA *pi, char * scratch, int verbose )
184
185{ int j, k, r;
186 int e[2] = {0,0};
187
188 pi->saved_r0 = r0();
189 w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
190 udelay(500);
191 w0(pi->saved_r0);
192
193 friq_connect(pi);
194 for (j=0;j<2;j++) {
195 friq_write_regr(pi,0,6,0xa0+j*0x10);
196 for (k=0;k<256;k++) {
197 friq_write_regr(pi,0,2,k^0xaa);
198 friq_write_regr(pi,0,3,k^0x55);
199 if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
200 }
201 }
202 friq_disconnect(pi);
203
204 friq_connect(pi);
205 friq_read_block_int(pi,scratch,512,0x10);
206 r = 0;
207 for (k=0;k<128;k++) if (scratch[k] != k) r++;
208 friq_disconnect(pi);
209
210 if (verbose) {
211 printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
212 pi->device,pi->port,pi->mode,e[0],e[1],r);
213 }
214
215 return (r || (e[0] && e[1]));
216}
217
218
219static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
220
221{ char *mode_string[6] = {"4-bit","8-bit",
222 "EPP-8","EPP-16","EPP-32"};
223
224 printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device,
225 FRIQ_VERSION,pi->port);
226 printk("mode %d (%s), delay %d\n",pi->mode,
227 mode_string[pi->mode],pi->delay);
228
229 pi->private = 1;
230 friq_connect(pi);
231 CMD(0x9e); /* disable sleep timer */
232 friq_disconnect(pi);
233
234}
235
236static void friq_release_proto( PIA *pi)
237{
238 if (pi->private) { /* turn off the power */
239 friq_connect(pi);
240 CMD(0x1d); CMD(0x1e);
241 friq_disconnect(pi);
242 pi->private = 0;
243 }
244}
245
246static struct pi_protocol friq = {
247 .owner = THIS_MODULE,
248 .name = "friq",
249 .max_mode = 5,
250 .epp_first = 2,
251 .default_delay = 1,
252 .max_units = 1,
253 .write_regr = friq_write_regr,
254 .read_regr = friq_read_regr,
255 .write_block = friq_write_block,
256 .read_block = friq_read_block,
257 .connect = friq_connect,
258 .disconnect = friq_disconnect,
259 .test_proto = friq_test_proto,
260 .log_adapter = friq_log_adapter,
261 .release_proto = friq_release_proto,
262};
263
264static int __init friq_init(void)
265{
Alexey Dobriyanb4178ab2006-12-06 20:36:21 -0800266 return paride_register(&friq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700267}
268
269static void __exit friq_exit(void)
270{
Alexey Dobriyanf4330002006-12-06 20:36:20 -0800271 paride_unregister(&friq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700272}
273
274MODULE_LICENSE("GPL");
275module_init(friq_init)
276module_exit(friq_exit)