Michael Hennerich | 9cfe4a9 | 2009-12-15 16:46:21 -0800 | [diff] [blame^] | 1 | /* |
| 2 | * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02 |
| 3 | * |
| 4 | * Copyright 2008-2009 Analog Devices Inc. |
| 5 | * Licensed under the GPL-2 or later. |
| 6 | */ |
| 7 | |
| 8 | #define DRIVER_NAME "bfin-lq035q1" |
| 9 | #define pr_fmt(fmt) DRIVER_NAME ": " fmt |
| 10 | |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/kernel.h> |
| 13 | #include <linux/errno.h> |
| 14 | #include <linux/string.h> |
| 15 | #include <linux/fb.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/types.h> |
| 18 | #include <linux/interrupt.h> |
| 19 | #include <linux/device.h> |
| 20 | #include <linux/backlight.h> |
| 21 | #include <linux/lcd.h> |
| 22 | #include <linux/dma-mapping.h> |
| 23 | #include <linux/platform_device.h> |
| 24 | #include <linux/spi/spi.h> |
| 25 | #include <linux/dma-mapping.h> |
| 26 | |
| 27 | #include <asm/blackfin.h> |
| 28 | #include <asm/irq.h> |
| 29 | #include <asm/dma.h> |
| 30 | #include <asm/portmux.h> |
| 31 | #include <asm/gptimers.h> |
| 32 | |
| 33 | #include <asm/bfin-lq035q1.h> |
| 34 | |
| 35 | #if defined(BF533_FAMILY) || defined(BF538_FAMILY) |
| 36 | #define TIMER_HSYNC_id TIMER1_id |
| 37 | #define TIMER_HSYNCbit TIMER1bit |
| 38 | #define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN1 |
| 39 | #define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1 |
| 40 | #define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF1 |
| 41 | |
| 42 | #define TIMER_VSYNC_id TIMER2_id |
| 43 | #define TIMER_VSYNCbit TIMER2bit |
| 44 | #define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN2 |
| 45 | #define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL2 |
| 46 | #define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF2 |
| 47 | #else |
| 48 | #define TIMER_HSYNC_id TIMER0_id |
| 49 | #define TIMER_HSYNCbit TIMER0bit |
| 50 | #define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN0 |
| 51 | #define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL0 |
| 52 | #define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF0 |
| 53 | |
| 54 | #define TIMER_VSYNC_id TIMER1_id |
| 55 | #define TIMER_VSYNCbit TIMER1bit |
| 56 | #define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN1 |
| 57 | #define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1 |
| 58 | #define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF1 |
| 59 | #endif |
| 60 | |
| 61 | #define LCD_X_RES 320 /* Horizontal Resolution */ |
| 62 | #define LCD_Y_RES 240 /* Vertical Resolution */ |
| 63 | #define DMA_BUS_SIZE 16 |
| 64 | |
| 65 | #define USE_RGB565_16_BIT_PPI |
| 66 | |
| 67 | #ifdef USE_RGB565_16_BIT_PPI |
| 68 | #define LCD_BPP 16 /* Bit Per Pixel */ |
| 69 | #define CLOCKS_PER_PIX 1 |
| 70 | #define CPLD_PIPELINE_DELAY_COR 0 /* NO CPLB */ |
| 71 | #endif |
| 72 | |
| 73 | /* Interface 16/18-bit TFT over an 8-bit wide PPI using a small Programmable Logic Device (CPLD) |
| 74 | * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165 |
| 75 | */ |
| 76 | |
| 77 | #ifdef USE_RGB565_8_BIT_PPI |
| 78 | #define LCD_BPP 16 /* Bit Per Pixel */ |
| 79 | #define CLOCKS_PER_PIX 2 |
| 80 | #define CPLD_PIPELINE_DELAY_COR 3 /* RGB565 */ |
| 81 | #endif |
| 82 | |
| 83 | #ifdef USE_RGB888_8_BIT_PPI |
| 84 | #define LCD_BPP 24 /* Bit Per Pixel */ |
| 85 | #define CLOCKS_PER_PIX 3 |
| 86 | #define CPLD_PIPELINE_DELAY_COR 5 /* RGB888 */ |
| 87 | #endif |
| 88 | |
| 89 | /* |
| 90 | * HS and VS timing parameters (all in number of PPI clk ticks) |
| 91 | */ |
| 92 | |
| 93 | #define U_LINE 4 /* Blanking Lines */ |
| 94 | |
| 95 | #define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */ |
| 96 | #define H_PERIOD (336 * CLOCKS_PER_PIX) /* HS period */ |
| 97 | #define H_PULSE (2 * CLOCKS_PER_PIX) /* HS pulse width */ |
| 98 | #define H_START (7 * CLOCKS_PER_PIX + CPLD_PIPELINE_DELAY_COR) /* first valid pixel */ |
| 99 | |
| 100 | #define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ |
| 101 | #define V_PULSE (2 * CLOCKS_PER_PIX) /* VS pulse width (1-5 H_PERIODs) */ |
| 102 | #define V_PERIOD (H_PERIOD * V_LINES) /* VS period */ |
| 103 | |
| 104 | #define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8)) |
| 105 | |
| 106 | #define BFIN_LCD_NBR_PALETTE_ENTRIES 256 |
| 107 | |
| 108 | #define PPI_TX_MODE 0x2 |
| 109 | #define PPI_XFER_TYPE_11 0xC |
| 110 | #define PPI_PORT_CFG_01 0x10 |
| 111 | #define PPI_POLS_1 0x8000 |
| 112 | |
| 113 | #if (CLOCKS_PER_PIX > 1) |
| 114 | #define PPI_PMODE (DLEN_8 | PACK_EN) |
| 115 | #else |
| 116 | #define PPI_PMODE (DLEN_16) |
| 117 | #endif |
| 118 | |
| 119 | #define LQ035_INDEX 0x74 |
| 120 | #define LQ035_DATA 0x76 |
| 121 | |
| 122 | #define LQ035_DRIVER_OUTPUT_CTL 0x1 |
| 123 | #define LQ035_SHUT_CTL 0x11 |
| 124 | |
| 125 | #define LQ035_DRIVER_OUTPUT_MASK (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV) |
| 126 | #define LQ035_DRIVER_OUTPUT_DEFAULT (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK) |
| 127 | |
| 128 | #define LQ035_SHUT (1 << 0) /* Shutdown */ |
| 129 | #define LQ035_ON (0 << 0) /* Shutdown */ |
| 130 | |
| 131 | struct bfin_lq035q1fb_info { |
| 132 | struct fb_info *fb; |
| 133 | struct device *dev; |
| 134 | struct spi_driver spidrv; |
| 135 | struct bfin_lq035q1fb_disp_info *disp_info; |
| 136 | unsigned char *fb_buffer; /* RGB Buffer */ |
| 137 | dma_addr_t dma_handle; |
| 138 | int lq035_open_cnt; |
| 139 | int irq; |
| 140 | spinlock_t lock; /* lock */ |
| 141 | u32 pseudo_pal[16]; |
| 142 | }; |
| 143 | |
| 144 | static int nocursor; |
| 145 | module_param(nocursor, int, 0644); |
| 146 | MODULE_PARM_DESC(nocursor, "cursor enable/disable"); |
| 147 | |
| 148 | struct spi_control { |
| 149 | unsigned short mode; |
| 150 | }; |
| 151 | |
| 152 | static int lq035q1_control(struct spi_device *spi, unsigned char reg, unsigned short value) |
| 153 | { |
| 154 | int ret; |
| 155 | u8 regs[3] = { LQ035_INDEX, 0, 0 }; |
| 156 | u8 dat[3] = { LQ035_DATA, 0, 0 }; |
| 157 | |
| 158 | if (!spi) |
| 159 | return -ENODEV; |
| 160 | |
| 161 | regs[2] = reg; |
| 162 | dat[1] = value >> 8; |
| 163 | dat[2] = value & 0xFF; |
| 164 | |
| 165 | ret = spi_write(spi, regs, ARRAY_SIZE(regs)); |
| 166 | ret |= spi_write(spi, dat, ARRAY_SIZE(dat)); |
| 167 | return ret; |
| 168 | } |
| 169 | |
| 170 | static int __devinit lq035q1_spidev_probe(struct spi_device *spi) |
| 171 | { |
| 172 | int ret; |
| 173 | struct spi_control *ctl; |
| 174 | struct bfin_lq035q1fb_info *info = container_of(spi->dev.driver, |
| 175 | struct bfin_lq035q1fb_info, |
| 176 | spidrv.driver); |
| 177 | |
| 178 | ctl = kzalloc(sizeof(*ctl), GFP_KERNEL); |
| 179 | |
| 180 | if (!ctl) |
| 181 | return -ENOMEM; |
| 182 | |
| 183 | ctl->mode = (info->disp_info->mode & |
| 184 | LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT; |
| 185 | |
| 186 | ret = lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON); |
| 187 | ret |= lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode); |
| 188 | if (ret) |
| 189 | return ret; |
| 190 | |
| 191 | spi_set_drvdata(spi, ctl); |
| 192 | |
| 193 | return 0; |
| 194 | } |
| 195 | |
| 196 | static int lq035q1_spidev_remove(struct spi_device *spi) |
| 197 | { |
| 198 | return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); |
| 199 | } |
| 200 | |
| 201 | #ifdef CONFIG_PM |
| 202 | static int lq035q1_spidev_suspend(struct spi_device *spi, pm_message_t state) |
| 203 | { |
| 204 | return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); |
| 205 | } |
| 206 | |
| 207 | static int lq035q1_spidev_resume(struct spi_device *spi) |
| 208 | { |
| 209 | int ret; |
| 210 | struct spi_control *ctl = spi_get_drvdata(spi); |
| 211 | |
| 212 | ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode); |
| 213 | if (ret) |
| 214 | return ret; |
| 215 | |
| 216 | return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON); |
| 217 | } |
| 218 | #else |
| 219 | # define lq035q1_spidev_suspend NULL |
| 220 | # define lq035q1_spidev_resume NULL |
| 221 | #endif |
| 222 | |
| 223 | /* Power down all displays on reboot, poweroff or halt */ |
| 224 | static void lq035q1_spidev_shutdown(struct spi_device *spi) |
| 225 | { |
| 226 | lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); |
| 227 | } |
| 228 | |
| 229 | static int lq035q1_backlight(struct bfin_lq035q1fb_info *info, unsigned arg) |
| 230 | { |
| 231 | if (info->disp_info->use_bl) |
| 232 | gpio_set_value(info->disp_info->gpio_bl, arg); |
| 233 | |
| 234 | return 0; |
| 235 | } |
| 236 | |
| 237 | static void bfin_lq035q1_config_ppi(struct bfin_lq035q1fb_info *fbi) |
| 238 | { |
| 239 | bfin_write_PPI_DELAY(H_START); |
| 240 | bfin_write_PPI_COUNT(H_ACTPIX - 1); |
| 241 | bfin_write_PPI_FRAME(V_LINES); |
| 242 | |
| 243 | bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */ |
| 244 | PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */ |
| 245 | PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */ |
| 246 | PPI_PMODE | /* 8/16 bit data length / PACK_EN? */ |
| 247 | PPI_POLS_1); /* faling edge syncs POLS */ |
| 248 | } |
| 249 | |
| 250 | static inline void bfin_lq035q1_disable_ppi(void) |
| 251 | { |
| 252 | bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN); |
| 253 | } |
| 254 | |
| 255 | static inline void bfin_lq035q1_enable_ppi(void) |
| 256 | { |
| 257 | bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); |
| 258 | } |
| 259 | |
| 260 | static void bfin_lq035q1_start_timers(void) |
| 261 | { |
| 262 | enable_gptimers(TIMER_VSYNCbit | TIMER_HSYNCbit); |
| 263 | } |
| 264 | |
| 265 | static void bfin_lq035q1_stop_timers(void) |
| 266 | { |
| 267 | disable_gptimers(TIMER_HSYNCbit | TIMER_VSYNCbit); |
| 268 | |
| 269 | set_gptimer_status(0, TIMER_HSYNC_STATUS_TRUN | TIMER_VSYNC_STATUS_TRUN | |
| 270 | TIMER_HSYNC_STATUS_TIMIL | TIMER_VSYNC_STATUS_TIMIL | |
| 271 | TIMER_HSYNC_STATUS_TOVF | TIMER_VSYNC_STATUS_TOVF); |
| 272 | |
| 273 | } |
| 274 | |
| 275 | static void bfin_lq035q1_init_timers(void) |
| 276 | { |
| 277 | |
| 278 | bfin_lq035q1_stop_timers(); |
| 279 | |
| 280 | set_gptimer_period(TIMER_HSYNC_id, H_PERIOD); |
| 281 | set_gptimer_pwidth(TIMER_HSYNC_id, H_PULSE); |
| 282 | set_gptimer_config(TIMER_HSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | |
| 283 | TIMER_TIN_SEL | TIMER_CLK_SEL| |
| 284 | TIMER_EMU_RUN); |
| 285 | |
| 286 | set_gptimer_period(TIMER_VSYNC_id, V_PERIOD); |
| 287 | set_gptimer_pwidth(TIMER_VSYNC_id, V_PULSE); |
| 288 | set_gptimer_config(TIMER_VSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | |
| 289 | TIMER_TIN_SEL | TIMER_CLK_SEL | |
| 290 | TIMER_EMU_RUN); |
| 291 | |
| 292 | } |
| 293 | |
| 294 | static void bfin_lq035q1_config_dma(struct bfin_lq035q1fb_info *fbi) |
| 295 | { |
| 296 | |
| 297 | set_dma_config(CH_PPI, |
| 298 | set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO, |
| 299 | INTR_DISABLE, DIMENSION_2D, |
| 300 | DATA_SIZE_16, |
| 301 | DMA_NOSYNC_KEEP_DMA_BUF)); |
| 302 | set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE); |
| 303 | set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8); |
| 304 | set_dma_y_count(CH_PPI, V_LINES); |
| 305 | |
| 306 | set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8); |
| 307 | set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer); |
| 308 | |
| 309 | } |
| 310 | |
| 311 | #if (CLOCKS_PER_PIX == 1) |
| 312 | static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, |
| 313 | P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, |
| 314 | P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, |
| 315 | P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, |
| 316 | P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, |
| 317 | P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, |
| 318 | P_PPI0_D15, 0}; |
| 319 | #else |
| 320 | static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, |
| 321 | P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, |
| 322 | P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, |
| 323 | P_PPI0_D6, P_PPI0_D7, 0}; |
| 324 | #endif |
| 325 | |
| 326 | static inline void bfin_lq035q1_free_ports(void) |
| 327 | { |
| 328 | peripheral_free_list(ppi0_req_16); |
| 329 | if (ANOMALY_05000400) |
| 330 | gpio_free(P_IDENT(P_PPI0_FS3)); |
| 331 | } |
| 332 | |
| 333 | static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev) |
| 334 | { |
| 335 | /* ANOMALY_05000400 - PPI Does Not Start Properly In Specific Mode: |
| 336 | * Drive PPI_FS3 Low |
| 337 | */ |
| 338 | if (ANOMALY_05000400) { |
| 339 | int ret = gpio_request(P_IDENT(P_PPI0_FS3), "PPI_FS3"); |
| 340 | if (ret) |
| 341 | return ret; |
| 342 | gpio_direction_output(P_IDENT(P_PPI0_FS3), 0); |
| 343 | } |
| 344 | |
| 345 | if (peripheral_request_list(ppi0_req_16, DRIVER_NAME)) { |
| 346 | dev_err(&pdev->dev, "requesting peripherals failed\n"); |
| 347 | return -EFAULT; |
| 348 | } |
| 349 | |
| 350 | return 0; |
| 351 | } |
| 352 | |
| 353 | static int bfin_lq035q1_fb_open(struct fb_info *info, int user) |
| 354 | { |
| 355 | struct bfin_lq035q1fb_info *fbi = info->par; |
| 356 | |
| 357 | spin_lock(&fbi->lock); |
| 358 | fbi->lq035_open_cnt++; |
| 359 | |
| 360 | if (fbi->lq035_open_cnt <= 1) { |
| 361 | |
| 362 | bfin_lq035q1_disable_ppi(); |
| 363 | SSYNC(); |
| 364 | |
| 365 | bfin_lq035q1_config_dma(fbi); |
| 366 | bfin_lq035q1_config_ppi(fbi); |
| 367 | bfin_lq035q1_init_timers(); |
| 368 | |
| 369 | /* start dma */ |
| 370 | enable_dma(CH_PPI); |
| 371 | bfin_lq035q1_enable_ppi(); |
| 372 | bfin_lq035q1_start_timers(); |
| 373 | lq035q1_backlight(fbi, 1); |
| 374 | } |
| 375 | |
| 376 | spin_unlock(&fbi->lock); |
| 377 | |
| 378 | return 0; |
| 379 | } |
| 380 | |
| 381 | static int bfin_lq035q1_fb_release(struct fb_info *info, int user) |
| 382 | { |
| 383 | struct bfin_lq035q1fb_info *fbi = info->par; |
| 384 | |
| 385 | spin_lock(&fbi->lock); |
| 386 | |
| 387 | fbi->lq035_open_cnt--; |
| 388 | |
| 389 | if (fbi->lq035_open_cnt <= 0) { |
| 390 | lq035q1_backlight(fbi, 0); |
| 391 | bfin_lq035q1_disable_ppi(); |
| 392 | SSYNC(); |
| 393 | disable_dma(CH_PPI); |
| 394 | bfin_lq035q1_stop_timers(); |
| 395 | } |
| 396 | |
| 397 | spin_unlock(&fbi->lock); |
| 398 | |
| 399 | return 0; |
| 400 | } |
| 401 | |
| 402 | static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var, |
| 403 | struct fb_info *info) |
| 404 | { |
| 405 | switch (var->bits_per_pixel) { |
| 406 | #if (LCD_BPP == 24) |
| 407 | case 24:/* TRUECOLOUR, 16m */ |
| 408 | #else |
| 409 | case 16:/* DIRECTCOLOUR, 64k */ |
| 410 | #endif |
| 411 | var->red.offset = info->var.red.offset; |
| 412 | var->green.offset = info->var.green.offset; |
| 413 | var->blue.offset = info->var.blue.offset; |
| 414 | var->red.length = info->var.red.length; |
| 415 | var->green.length = info->var.green.length; |
| 416 | var->blue.length = info->var.blue.length; |
| 417 | var->transp.offset = 0; |
| 418 | var->transp.length = 0; |
| 419 | var->transp.msb_right = 0; |
| 420 | var->red.msb_right = 0; |
| 421 | var->green.msb_right = 0; |
| 422 | var->blue.msb_right = 0; |
| 423 | break; |
| 424 | default: |
| 425 | pr_debug("%s: depth not supported: %u BPP\n", __func__, |
| 426 | var->bits_per_pixel); |
| 427 | return -EINVAL; |
| 428 | } |
| 429 | |
| 430 | if (info->var.xres != var->xres || info->var.yres != var->yres || |
| 431 | info->var.xres_virtual != var->xres_virtual || |
| 432 | info->var.yres_virtual != var->yres_virtual) { |
| 433 | pr_debug("%s: Resolution not supported: X%u x Y%u \n", |
| 434 | __func__, var->xres, var->yres); |
| 435 | return -EINVAL; |
| 436 | } |
| 437 | |
| 438 | /* |
| 439 | * Memory limit |
| 440 | */ |
| 441 | |
| 442 | if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { |
| 443 | pr_debug("%s: Memory Limit requested yres_virtual = %u\n", |
| 444 | __func__, var->yres_virtual); |
| 445 | return -ENOMEM; |
| 446 | } |
| 447 | |
| 448 | |
| 449 | return 0; |
| 450 | } |
| 451 | |
| 452 | int bfin_lq035q1_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) |
| 453 | { |
| 454 | if (nocursor) |
| 455 | return 0; |
| 456 | else |
| 457 | return -EINVAL; /* just to force soft_cursor() call */ |
| 458 | } |
| 459 | |
| 460 | static int bfin_lq035q1_fb_setcolreg(u_int regno, u_int red, u_int green, |
| 461 | u_int blue, u_int transp, |
| 462 | struct fb_info *info) |
| 463 | { |
| 464 | if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES) |
| 465 | return -EINVAL; |
| 466 | |
| 467 | if (info->var.grayscale) { |
| 468 | /* grayscale = 0.30*R + 0.59*G + 0.11*B */ |
| 469 | red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; |
| 470 | } |
| 471 | |
| 472 | if (info->fix.visual == FB_VISUAL_TRUECOLOR) { |
| 473 | |
| 474 | u32 value; |
| 475 | /* Place color in the pseudopalette */ |
| 476 | if (regno > 16) |
| 477 | return -EINVAL; |
| 478 | |
| 479 | red >>= (16 - info->var.red.length); |
| 480 | green >>= (16 - info->var.green.length); |
| 481 | blue >>= (16 - info->var.blue.length); |
| 482 | |
| 483 | value = (red << info->var.red.offset) | |
| 484 | (green << info->var.green.offset) | |
| 485 | (blue << info->var.blue.offset); |
| 486 | value &= 0xFFFFFF; |
| 487 | |
| 488 | ((u32 *) (info->pseudo_palette))[regno] = value; |
| 489 | |
| 490 | } |
| 491 | |
| 492 | return 0; |
| 493 | } |
| 494 | |
| 495 | static struct fb_ops bfin_lq035q1_fb_ops = { |
| 496 | .owner = THIS_MODULE, |
| 497 | .fb_open = bfin_lq035q1_fb_open, |
| 498 | .fb_release = bfin_lq035q1_fb_release, |
| 499 | .fb_check_var = bfin_lq035q1_fb_check_var, |
| 500 | .fb_fillrect = cfb_fillrect, |
| 501 | .fb_copyarea = cfb_copyarea, |
| 502 | .fb_imageblit = cfb_imageblit, |
| 503 | .fb_cursor = bfin_lq035q1_fb_cursor, |
| 504 | .fb_setcolreg = bfin_lq035q1_fb_setcolreg, |
| 505 | }; |
| 506 | |
| 507 | static irqreturn_t bfin_lq035q1_irq_error(int irq, void *dev_id) |
| 508 | { |
| 509 | /*struct bfin_lq035q1fb_info *info = (struct bfin_lq035q1fb_info *)dev_id;*/ |
| 510 | |
| 511 | u16 status = bfin_read_PPI_STATUS(); |
| 512 | bfin_write_PPI_STATUS(-1); |
| 513 | |
| 514 | if (status) { |
| 515 | bfin_lq035q1_disable_ppi(); |
| 516 | disable_dma(CH_PPI); |
| 517 | |
| 518 | /* start dma */ |
| 519 | enable_dma(CH_PPI); |
| 520 | bfin_lq035q1_enable_ppi(); |
| 521 | bfin_write_PPI_STATUS(-1); |
| 522 | } |
| 523 | |
| 524 | return IRQ_HANDLED; |
| 525 | } |
| 526 | |
| 527 | static int __devinit bfin_lq035q1_probe(struct platform_device *pdev) |
| 528 | { |
| 529 | struct bfin_lq035q1fb_info *info; |
| 530 | struct fb_info *fbinfo; |
| 531 | int ret; |
| 532 | |
| 533 | ret = request_dma(CH_PPI, DRIVER_NAME"_CH_PPI"); |
| 534 | if (ret < 0) { |
| 535 | dev_err(&pdev->dev, "PPI DMA unavailable\n"); |
| 536 | goto out1; |
| 537 | } |
| 538 | |
| 539 | fbinfo = framebuffer_alloc(sizeof(*info), &pdev->dev); |
| 540 | if (!fbinfo) { |
| 541 | ret = -ENOMEM; |
| 542 | goto out2; |
| 543 | } |
| 544 | |
| 545 | info = fbinfo->par; |
| 546 | info->fb = fbinfo; |
| 547 | info->dev = &pdev->dev; |
| 548 | |
| 549 | info->disp_info = pdev->dev.platform_data; |
| 550 | |
| 551 | platform_set_drvdata(pdev, fbinfo); |
| 552 | |
| 553 | strcpy(fbinfo->fix.id, DRIVER_NAME); |
| 554 | |
| 555 | fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; |
| 556 | fbinfo->fix.type_aux = 0; |
| 557 | fbinfo->fix.xpanstep = 0; |
| 558 | fbinfo->fix.ypanstep = 0; |
| 559 | fbinfo->fix.ywrapstep = 0; |
| 560 | fbinfo->fix.accel = FB_ACCEL_NONE; |
| 561 | fbinfo->fix.visual = FB_VISUAL_TRUECOLOR; |
| 562 | |
| 563 | fbinfo->var.nonstd = 0; |
| 564 | fbinfo->var.activate = FB_ACTIVATE_NOW; |
| 565 | fbinfo->var.height = -1; |
| 566 | fbinfo->var.width = -1; |
| 567 | fbinfo->var.accel_flags = 0; |
| 568 | fbinfo->var.vmode = FB_VMODE_NONINTERLACED; |
| 569 | |
| 570 | fbinfo->var.xres = LCD_X_RES; |
| 571 | fbinfo->var.xres_virtual = LCD_X_RES; |
| 572 | fbinfo->var.yres = LCD_Y_RES; |
| 573 | fbinfo->var.yres_virtual = LCD_Y_RES; |
| 574 | fbinfo->var.bits_per_pixel = LCD_BPP; |
| 575 | |
| 576 | if (info->disp_info->mode & LQ035_BGR) { |
| 577 | #if (LCD_BPP == 24) |
| 578 | fbinfo->var.red.offset = 0; |
| 579 | fbinfo->var.green.offset = 8; |
| 580 | fbinfo->var.blue.offset = 16; |
| 581 | #else |
| 582 | fbinfo->var.red.offset = 0; |
| 583 | fbinfo->var.green.offset = 5; |
| 584 | fbinfo->var.blue.offset = 11; |
| 585 | #endif |
| 586 | } else { |
| 587 | #if (LCD_BPP == 24) |
| 588 | fbinfo->var.red.offset = 16; |
| 589 | fbinfo->var.green.offset = 8; |
| 590 | fbinfo->var.blue.offset = 0; |
| 591 | #else |
| 592 | fbinfo->var.red.offset = 11; |
| 593 | fbinfo->var.green.offset = 5; |
| 594 | fbinfo->var.blue.offset = 0; |
| 595 | #endif |
| 596 | } |
| 597 | |
| 598 | fbinfo->var.transp.offset = 0; |
| 599 | |
| 600 | #if (LCD_BPP == 24) |
| 601 | fbinfo->var.red.length = 8; |
| 602 | fbinfo->var.green.length = 8; |
| 603 | fbinfo->var.blue.length = 8; |
| 604 | #else |
| 605 | fbinfo->var.red.length = 5; |
| 606 | fbinfo->var.green.length = 6; |
| 607 | fbinfo->var.blue.length = 5; |
| 608 | #endif |
| 609 | |
| 610 | fbinfo->var.transp.length = 0; |
| 611 | |
| 612 | fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8 |
| 613 | + ACTIVE_VIDEO_MEM_OFFSET; |
| 614 | |
| 615 | fbinfo->fix.line_length = fbinfo->var.xres_virtual * |
| 616 | fbinfo->var.bits_per_pixel / 8; |
| 617 | |
| 618 | |
| 619 | fbinfo->fbops = &bfin_lq035q1_fb_ops; |
| 620 | fbinfo->flags = FBINFO_FLAG_DEFAULT; |
| 621 | |
| 622 | info->fb_buffer = |
| 623 | dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle, |
| 624 | GFP_KERNEL); |
| 625 | |
| 626 | if (NULL == info->fb_buffer) { |
| 627 | dev_err(&pdev->dev, "couldn't allocate dma buffer\n"); |
| 628 | ret = -ENOMEM; |
| 629 | goto out3; |
| 630 | } |
| 631 | |
| 632 | fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; |
| 633 | fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; |
| 634 | |
| 635 | fbinfo->fbops = &bfin_lq035q1_fb_ops; |
| 636 | |
| 637 | fbinfo->pseudo_palette = &info->pseudo_pal; |
| 638 | |
| 639 | ret = fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0); |
| 640 | if (ret < 0) { |
| 641 | dev_err(&pdev->dev, "failed to allocate colormap (%d entries)\n", |
| 642 | BFIN_LCD_NBR_PALETTE_ENTRIES); |
| 643 | goto out4; |
| 644 | } |
| 645 | |
| 646 | ret = bfin_lq035q1_request_ports(pdev); |
| 647 | if (ret) { |
| 648 | dev_err(&pdev->dev, "couldn't request gpio port\n"); |
| 649 | goto out6; |
| 650 | } |
| 651 | |
| 652 | info->irq = platform_get_irq(pdev, 0); |
| 653 | if (info->irq < 0) { |
| 654 | ret = -EINVAL; |
| 655 | goto out7; |
| 656 | } |
| 657 | |
| 658 | ret = request_irq(info->irq, bfin_lq035q1_irq_error, IRQF_DISABLED, |
| 659 | DRIVER_NAME" PPI ERROR", info); |
| 660 | if (ret < 0) { |
| 661 | dev_err(&pdev->dev, "unable to request PPI ERROR IRQ\n"); |
| 662 | goto out7; |
| 663 | } |
| 664 | |
| 665 | info->spidrv.driver.name = DRIVER_NAME"-spi"; |
| 666 | info->spidrv.probe = lq035q1_spidev_probe; |
| 667 | info->spidrv.remove = __devexit_p(lq035q1_spidev_remove); |
| 668 | info->spidrv.shutdown = lq035q1_spidev_shutdown; |
| 669 | info->spidrv.suspend = lq035q1_spidev_suspend; |
| 670 | info->spidrv.resume = lq035q1_spidev_resume; |
| 671 | |
| 672 | ret = spi_register_driver(&info->spidrv); |
| 673 | if (ret < 0) { |
| 674 | dev_err(&pdev->dev, "couldn't register SPI Interface\n"); |
| 675 | goto out8; |
| 676 | } |
| 677 | |
| 678 | if (info->disp_info->use_bl) { |
| 679 | ret = gpio_request(info->disp_info->gpio_bl, "LQ035 Backlight"); |
| 680 | |
| 681 | if (ret) { |
| 682 | dev_err(&pdev->dev, "failed to request GPIO %d\n", |
| 683 | info->disp_info->gpio_bl); |
| 684 | goto out9; |
| 685 | } |
| 686 | gpio_direction_output(info->disp_info->gpio_bl, 0); |
| 687 | } |
| 688 | |
| 689 | ret = register_framebuffer(fbinfo); |
| 690 | if (ret < 0) { |
| 691 | dev_err(&pdev->dev, "unable to register framebuffer\n"); |
| 692 | goto out10; |
| 693 | } |
| 694 | |
| 695 | dev_info(&pdev->dev, "%dx%d %d-bit RGB FrameBuffer initialized\n", |
| 696 | LCD_X_RES, LCD_Y_RES, LCD_BPP); |
| 697 | |
| 698 | return 0; |
| 699 | |
| 700 | out10: |
| 701 | if (info->disp_info->use_bl) |
| 702 | gpio_free(info->disp_info->gpio_bl); |
| 703 | out9: |
| 704 | spi_unregister_driver(&info->spidrv); |
| 705 | out8: |
| 706 | free_irq(info->irq, info); |
| 707 | out7: |
| 708 | bfin_lq035q1_free_ports(); |
| 709 | out6: |
| 710 | fb_dealloc_cmap(&fbinfo->cmap); |
| 711 | out4: |
| 712 | dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, |
| 713 | info->dma_handle); |
| 714 | out3: |
| 715 | framebuffer_release(fbinfo); |
| 716 | out2: |
| 717 | free_dma(CH_PPI); |
| 718 | out1: |
| 719 | platform_set_drvdata(pdev, NULL); |
| 720 | |
| 721 | return ret; |
| 722 | } |
| 723 | |
| 724 | static int __devexit bfin_lq035q1_remove(struct platform_device *pdev) |
| 725 | { |
| 726 | struct fb_info *fbinfo = platform_get_drvdata(pdev); |
| 727 | struct bfin_lq035q1fb_info *info = fbinfo->par; |
| 728 | |
| 729 | if (info->disp_info->use_bl) |
| 730 | gpio_free(info->disp_info->gpio_bl); |
| 731 | |
| 732 | spi_unregister_driver(&info->spidrv); |
| 733 | |
| 734 | unregister_framebuffer(fbinfo); |
| 735 | |
| 736 | free_dma(CH_PPI); |
| 737 | free_irq(info->irq, info); |
| 738 | |
| 739 | if (info->fb_buffer != NULL) |
| 740 | dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, |
| 741 | info->dma_handle); |
| 742 | |
| 743 | fb_dealloc_cmap(&fbinfo->cmap); |
| 744 | |
| 745 | bfin_lq035q1_free_ports(); |
| 746 | |
| 747 | platform_set_drvdata(pdev, NULL); |
| 748 | framebuffer_release(fbinfo); |
| 749 | |
| 750 | dev_info(&pdev->dev, "unregistered LCD driver\n"); |
| 751 | |
| 752 | return 0; |
| 753 | } |
| 754 | |
| 755 | #ifdef CONFIG_PM |
| 756 | static int bfin_lq035q1_suspend(struct device *dev) |
| 757 | { |
| 758 | struct fb_info *fbinfo = dev_get_drvdata(dev); |
| 759 | struct bfin_lq035q1fb_info *info = fbinfo->par; |
| 760 | |
| 761 | if (info->lq035_open_cnt) { |
| 762 | lq035q1_backlight(info, 0); |
| 763 | bfin_lq035q1_disable_ppi(); |
| 764 | SSYNC(); |
| 765 | disable_dma(CH_PPI); |
| 766 | bfin_lq035q1_stop_timers(); |
| 767 | bfin_write_PPI_STATUS(-1); |
| 768 | } |
| 769 | |
| 770 | return 0; |
| 771 | } |
| 772 | |
| 773 | static int bfin_lq035q1_resume(struct device *dev) |
| 774 | { |
| 775 | struct fb_info *fbinfo = dev_get_drvdata(dev); |
| 776 | struct bfin_lq035q1fb_info *info = fbinfo->par; |
| 777 | |
| 778 | if (info->lq035_open_cnt) { |
| 779 | bfin_lq035q1_disable_ppi(); |
| 780 | SSYNC(); |
| 781 | |
| 782 | bfin_lq035q1_config_dma(info); |
| 783 | bfin_lq035q1_config_ppi(info); |
| 784 | bfin_lq035q1_init_timers(); |
| 785 | |
| 786 | /* start dma */ |
| 787 | enable_dma(CH_PPI); |
| 788 | bfin_lq035q1_enable_ppi(); |
| 789 | bfin_lq035q1_start_timers(); |
| 790 | lq035q1_backlight(info, 1); |
| 791 | } |
| 792 | |
| 793 | return 0; |
| 794 | } |
| 795 | |
| 796 | static struct dev_pm_ops bfin_lq035q1_dev_pm_ops = { |
| 797 | .suspend = bfin_lq035q1_suspend, |
| 798 | .resume = bfin_lq035q1_resume, |
| 799 | }; |
| 800 | #endif |
| 801 | |
| 802 | static struct platform_driver bfin_lq035q1_driver = { |
| 803 | .probe = bfin_lq035q1_probe, |
| 804 | .remove = __devexit_p(bfin_lq035q1_remove), |
| 805 | .driver = { |
| 806 | .name = DRIVER_NAME, |
| 807 | #ifdef CONFIG_PM |
| 808 | .pm = &bfin_lq035q1_dev_pm_ops, |
| 809 | #endif |
| 810 | }, |
| 811 | }; |
| 812 | |
| 813 | static int __init bfin_lq035q1_driver_init(void) |
| 814 | { |
| 815 | return platform_driver_register(&bfin_lq035q1_driver); |
| 816 | } |
| 817 | module_init(bfin_lq035q1_driver_init); |
| 818 | |
| 819 | static void __exit bfin_lq035q1_driver_cleanup(void) |
| 820 | { |
| 821 | platform_driver_unregister(&bfin_lq035q1_driver); |
| 822 | } |
| 823 | module_exit(bfin_lq035q1_driver_cleanup); |
| 824 | |
| 825 | MODULE_DESCRIPTION("Blackfin TFT LCD Driver"); |
| 826 | MODULE_LICENSE("GPL"); |