blob: 81fbe78701f05dec006406386b12b3cb1f9fdc8e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Hardware specific macros, defines and structures
3 *
4 * This software may be used and distributed according to the terms
5 * of the GNU General Public License, incorporated herein by reference.
6 *
7 */
8
9#ifndef HARDWARE_H
10#define HARDWARE_H
11
12#include <asm/param.h> /* For HZ */
13
14/*
15 * General hardware parameters common to all ISA adapters
16 */
17
18#define MAX_CARDS 4 /* The maximum number of cards to
19 control or probe for. */
20
21#define SIGNATURE 0x87654321 /* Board reset signature */
22#define SIG_OFFSET 0x1004 /* Where to find signature in shared RAM */
23#define TRACE_OFFSET 0x1008 /* Trace enable word offset in shared RAM */
24#define BUFFER_OFFSET 0x1800 /* Beginning of buffers */
25
26/* I/O Port parameters */
27#define IOBASE_MIN 0x180 /* Lowest I/O port address */
28#define IOBASE_MAX 0x3C0 /* Highest I/O port address */
29#define IOBASE_OFFSET 0x20 /* Inter-board I/O port gap used during
30 probing */
31#define FIFORD_OFFSET 0x0
32#define FIFOWR_OFFSET 0x400
33#define FIFOSTAT_OFFSET 0x1000
34#define RESET_OFFSET 0x2800
35#define PG0_OFFSET 0x3000 /* Offset from I/O Base for Page 0 register */
36#define PG1_OFFSET 0x3400 /* Offset from I/O Base for Page 1 register */
37#define PG2_OFFSET 0x3800 /* Offset from I/O Base for Page 2 register */
38#define PG3_OFFSET 0x3C00 /* Offset from I/O Base for Page 3 register */
39
40#define FIFO_READ 0 /* FIFO Read register */
41#define FIFO_WRITE 1 /* FIFO Write rgister */
42#define LO_ADDR_PTR 2 /* Extended RAM Low Addr Pointer */
43#define HI_ADDR_PTR 3 /* Extended RAM High Addr Pointer */
44#define NOT_USED_1 4
45#define FIFO_STATUS 5 /* FIFO Status Register */
46#define NOT_USED_2 6
47#define MEM_OFFSET 7
48#define SFT_RESET 10 /* Reset Register */
49#define EXP_BASE 11 /* Shared RAM Base address */
50#define EXP_PAGE0 12 /* Shared RAM Page0 register */
51#define EXP_PAGE1 13 /* Shared RAM Page1 register */
52#define EXP_PAGE2 14 /* Shared RAM Page2 register */
53#define EXP_PAGE3 15 /* Shared RAM Page3 register */
54#define IRQ_SELECT 16 /* IRQ selection register */
55#define MAX_IO_REGS 17 /* Total number of I/O ports */
56
57/* FIFO register values */
58#define RF_HAS_DATA 0x01 /* fifo has data */
59#define RF_QUART_FULL 0x02 /* fifo quarter full */
60#define RF_HALF_FULL 0x04 /* fifo half full */
61#define RF_NOT_FULL 0x08 /* fifo not full */
62#define WF_HAS_DATA 0x10 /* fifo has data */
63#define WF_QUART_FULL 0x20 /* fifo quarter full */
64#define WF_HALF_FULL 0x40 /* fifo half full */
65#define WF_NOT_FULL 0x80 /* fifo not full */
66
67/* Shared RAM parameters */
68#define SRAM_MIN 0xC0000 /* Lowest host shared RAM address */
69#define SRAM_MAX 0xEFFFF /* Highest host shared RAM address */
70#define SRAM_PAGESIZE 0x4000 /* Size of one RAM page (16K) */
71
72/* Shared RAM buffer parameters */
73#define BUFFER_SIZE 0x800 /* The size of a buffer in bytes */
74#define BUFFER_BASE BUFFER_OFFSET /* Offset from start of shared RAM
75 where buffer start */
76#define BUFFERS_MAX 16 /* Maximum number of send/receive
77 buffers per channel */
78#define HDLC_PROTO 0x01 /* Frame Format for Layer 2 */
79
80#define BRI_BOARD 0
81#define POTS_BOARD 1
82#define PRI_BOARD 2
83
84/*
85 * Specific hardware parameters for the DataCommute/BRI
86 */
87#define BRI_CHANNELS 2 /* Number of B channels */
88#define BRI_BASEPG_VAL 0x98
89#define BRI_MAGIC 0x60000 /* Magic Number */
Uwe Kleine-König9ddc5b62010-01-20 17:02:24 +010090#define BRI_MEMSIZE 0x10000 /* Amount of RAM (64K) */
Linus Torvalds1da177e2005-04-16 15:20:36 -070091#define BRI_PARTNO "72-029"
92#define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
93/*
94 * Specific hardware parameters for the DataCommute/PRI
95 */
96#define PRI_CHANNELS 23 /* Number of B channels */
97#define PRI_BASEPG_VAL 0x88
98#define PRI_MAGIC 0x20000 /* Magic Number */
99#define PRI_MEMSIZE 0x100000 /* Amount of RAM (1M) */
100#define PRI_PARTNO "72-030"
101#define PRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
102
103/*
104 * Some handy macros
105 */
106
107/* Determine if a channel number is valid for the adapter */
Joe Perches475be4d2012-02-19 19:52:38 -0800108#define IS_VALID_CHANNEL(y, x) ((x > 0) && (x <= sc_adapter[y]->channels))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109
110#endif