drivers/mfd/ab8500-core.c

/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License Terms: GNU General Public License v2
 * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
 * Author: Rabin Vincent <rabin.vincent@stericsson.com>
 * Author: Mattias Wallin <mattias.wallin@stericsson.com>
 */

#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/regulator/ab8500.h>
#include <linux/of.h>
#include <linux/of_device.h>

/*
 * Interrupt register offsets
 * Bank : 0x0E
 */
#define AB8500_IT_SOURCE1_REG		0x00
#define AB8500_IT_SOURCE2_REG		0x01
#define AB8500_IT_SOURCE3_REG		0x02
#define AB8500_IT_SOURCE4_REG		0x03
#define AB8500_IT_SOURCE5_REG		0x04
#define AB8500_IT_SOURCE6_REG		0x05
#define AB8500_IT_SOURCE7_REG		0x06
#define AB8500_IT_SOURCE8_REG		0x07
#define AB9540_IT_SOURCE13_REG		0x0C
#define AB8500_IT_SOURCE19_REG		0x12
#define AB8500_IT_SOURCE20_REG		0x13
#define AB8500_IT_SOURCE21_REG		0x14
#define AB8500_IT_SOURCE22_REG		0x15
#define AB8500_IT_SOURCE23_REG		0x16
#define AB8500_IT_SOURCE24_REG		0x17

/*
 * latch registers
 */
#define AB8500_IT_LATCH1_REG		0x20
#define AB8500_IT_LATCH2_REG		0x21
#define AB8500_IT_LATCH3_REG		0x22
#define AB8500_IT_LATCH4_REG		0x23
#define AB8500_IT_LATCH5_REG		0x24
#define AB8500_IT_LATCH6_REG		0x25
#define AB8500_IT_LATCH7_REG		0x26
#define AB8500_IT_LATCH8_REG		0x27
#define AB8500_IT_LATCH9_REG		0x28
#define AB8500_IT_LATCH10_REG		0x29
#define AB8500_IT_LATCH12_REG		0x2B
#define AB9540_IT_LATCH13_REG		0x2C
#define AB8500_IT_LATCH19_REG		0x32
#define AB8500_IT_LATCH20_REG		0x33
#define AB8500_IT_LATCH21_REG		0x34
#define AB8500_IT_LATCH22_REG		0x35
#define AB8500_IT_LATCH23_REG		0x36
#define AB8500_IT_LATCH24_REG		0x37

/*
 * mask registers
 */

#define AB8500_IT_MASK1_REG		0x40
#define AB8500_IT_MASK2_REG		0x41
#define AB8500_IT_MASK3_REG		0x42
#define AB8500_IT_MASK4_REG		0x43
#define AB8500_IT_MASK5_REG		0x44
#define AB8500_IT_MASK6_REG		0x45
#define AB8500_IT_MASK7_REG		0x46
#define AB8500_IT_MASK8_REG		0x47
#define AB8500_IT_MASK9_REG		0x48
#define AB8500_IT_MASK10_REG		0x49
#define AB8500_IT_MASK11_REG		0x4A
#define AB8500_IT_MASK12_REG		0x4B
#define AB8500_IT_MASK13_REG		0x4C
#define AB8500_IT_MASK14_REG		0x4D
#define AB8500_IT_MASK15_REG		0x4E
#define AB8500_IT_MASK16_REG		0x4F
#define AB8500_IT_MASK17_REG		0x50
#define AB8500_IT_MASK18_REG		0x51
#define AB8500_IT_MASK19_REG		0x52
#define AB8500_IT_MASK20_REG		0x53
#define AB8500_IT_MASK21_REG		0x54
#define AB8500_IT_MASK22_REG		0x55
#define AB8500_IT_MASK23_REG		0x56
#define AB8500_IT_MASK24_REG		0x57
#define AB8500_IT_MASK25_REG		0x58

/*
 * latch hierarchy registers
 */
#define AB8500_IT_LATCHHIER1_REG	0x60
#define AB8500_IT_LATCHHIER2_REG	0x61
#define AB8500_IT_LATCHHIER3_REG	0x62
#define AB8540_IT_LATCHHIER4_REG	0x63

#define AB8500_IT_LATCHHIER_NUM		3
#define AB8540_IT_LATCHHIER_NUM		4

#define AB8500_REV_REG			0x80
#define AB8500_IC_NAME_REG		0x82
#define AB8500_SWITCH_OFF_STATUS	0x00

#define AB8500_TURN_ON_STATUS		0x00
#define AB8505_TURN_ON_STATUS_2		0x04

#define AB8500_CH_USBCH_STAT1_REG	0x02
#define VBUS_DET_DBNC100		0x02
#define VBUS_DET_DBNC1			0x01

static DEFINE_SPINLOCK(on_stat_lock);
static u8 turn_on_stat_mask = 0xFF;
static u8 turn_on_stat_set;
static bool no_bm; /* No battery management */
module_param(no_bm, bool, S_IRUGO);

#define AB9540_MODEM_CTRL2_REG			0x23
#define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT	BIT(2)

/*
 * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
 * numbers are indexed into this array with (num / 8). The interupts are
 * defined in linux/mfd/ab8500.h
 *
 * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at
 * offset 0.
 */
/* AB8500 support */
static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
	0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21,
};

/* AB9540 / AB8505 support */
static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = {
	0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23
};

/* AB8540 support */
static const int ab8540_irq_regoffset[AB8540_NUM_IRQ_REGS] = {
	0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22,
	23, 25, 26, 27, 28, 29, 30, 31,
};

static const char ab8500_version_str[][7] = {
	[AB8500_VERSION_AB8500] = "AB8500",
	[AB8500_VERSION_AB8505] = "AB8505",
	[AB8500_VERSION_AB9540] = "AB9540",
	[AB8500_VERSION_AB8540] = "AB8540",
};

static int ab8500_prcmu_write(struct ab8500 *ab8500, u16 addr, u8 data)
{
	int ret;

	ret = prcmu_abb_write((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1);
	if (ret < 0)
		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
	return ret;
}

static int ab8500_prcmu_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask,
	u8 data)
{
	int ret;

	ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data,
		&mask, 1);
	if (ret < 0)
		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
	return ret;
}

static int ab8500_prcmu_read(struct ab8500 *ab8500, u16 addr)
{
	int ret;
	u8 data;

	ret = prcmu_abb_read((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1);
	if (ret < 0) {
		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
		return ret;
	}
	return (int)data;
}

static int ab8500_get_chip_id(struct device *dev)
{
	struct ab8500 *ab8500;

	if (!dev)
		return -EINVAL;
	ab8500 = dev_get_drvdata(dev->parent);
	return ab8500 ? (int)ab8500->chip_id : -EINVAL;
}

static int set_register_interruptible(struct ab8500 *ab8500, u8 bank,
	u8 reg, u8 data)
{
	int ret;
	/*
	 * Put the u8 bank and u8 register together into a an u16.
	 * The bank on higher 8 bits and register in lower 8 bits.
	 */
	u16 addr = ((u16)bank) << 8 | reg;

	dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);

	mutex_lock(&ab8500->lock);

	ret = ab8500->write(ab8500, addr, data);
	if (ret < 0)
		dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
			addr, ret);
	mutex_unlock(&ab8500->lock);

	return ret;
}

static int ab8500_set_register(struct device *dev, u8 bank,
	u8 reg, u8 value)
{
	int ret;
	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);

	atomic_inc(&ab8500->transfer_ongoing);
	ret = set_register_interruptible(ab8500, bank, reg, value);
	atomic_dec(&ab8500->transfer_ongoing);
	return ret;
}

static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
	u8 reg, u8 *value)
{
	int ret;
	u16 addr = ((u16)bank) << 8 | reg;

	mutex_lock(&ab8500->lock);

	ret = ab8500->read(ab8500, addr);
	if (ret < 0)
		dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
			addr, ret);
	else
		*value = ret;

	mutex_unlock(&ab8500->lock);
	dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);

	return ret;
}

static int ab8500_get_register(struct device *dev, u8 bank,
	u8 reg, u8 *value)
{
	int ret;
	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);

	atomic_inc(&ab8500->transfer_ongoing);
	ret = get_register_interruptible(ab8500, bank, reg, value);
	atomic_dec(&ab8500->transfer_ongoing);
	return ret;
}

static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
	u8 reg, u8 bitmask, u8 bitvalues)
{
	int ret;
	u16 addr = ((u16)bank) << 8 | reg;

	mutex_lock(&ab8500->lock);

	if (ab8500->write_masked == NULL) {
		u8 data;

		ret = ab8500->read(ab8500, addr);
		if (ret < 0) {
			dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
				addr, ret);
			goto out;
		}

		data = (u8)ret;
		data = (~bitmask & data) | (bitmask & bitvalues);

		ret = ab8500->write(ab8500, addr, data);
		if (ret < 0)
			dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
				addr, ret);

		dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr,
			data);
		goto out;
	}
	ret = ab8500->write_masked(ab8500, addr, bitmask, bitvalues);
	if (ret < 0)
		dev_err(ab8500->dev, "failed to modify reg %#x: %d\n", addr,
			ret);
out:
	mutex_unlock(&ab8500->lock);
	return ret;
}

static int ab8500_mask_and_set_register(struct device *dev,
	u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
{
	int ret;
	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);

	atomic_inc(&ab8500->transfer_ongoing);
	ret = mask_and_set_register_interruptible(ab8500, bank, reg,
						 bitmask, bitvalues);
	atomic_dec(&ab8500->transfer_ongoing);
	return ret;
}

static struct abx500_ops ab8500_ops = {
	.get_chip_id = ab8500_get_chip_id,
	.get_register = ab8500_get_register,
	.set_register = ab8500_set_register,
	.get_register_page = NULL,
	.set_register_page = NULL,
	.mask_and_set_register = ab8500_mask_and_set_register,
	.event_registers_startup_state_get = NULL,
	.startup_irq_enabled = NULL,
	.dump_all_banks = ab8500_dump_all_banks,
};

static void ab8500_irq_lock(struct irq_data *data)
{
	struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data);

	mutex_lock(&ab8500->irq_lock);
	atomic_inc(&ab8500->transfer_ongoing);
}

static void ab8500_irq_sync_unlock(struct irq_data *data)
{
	struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data);
	int i;

	for (i = 0; i < ab8500->mask_size; i++) {
		u8 old = ab8500->oldmask[i];
		u8 new = ab8500->mask[i];
		int reg;

		if (new == old)
			continue;

		/*
		 * Interrupt register 12 doesn't exist prior to AB8500 version
		 * 2.0
		 */
		if (ab8500->irq_reg_offset[i] == 11 &&
			is_ab8500_1p1_or_earlier(ab8500))
			continue;

		if (ab8500->irq_reg_offset[i] < 0)
			continue;

		ab8500->oldmask[i] = new;

		reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i];
		set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new);
	}
	atomic_dec(&ab8500->transfer_ongoing);
	mutex_unlock(&ab8500->irq_lock);
}

static void ab8500_irq_mask(struct irq_data *data)
{
	struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data);
	int offset = data->hwirq;
	int index = offset / 8;
	int mask = 1 << (offset % 8);

	ab8500->mask[index] |= mask;

	/* The AB8500 GPIOs have two interrupts each (rising & falling). */
	if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R)
		ab8500->mask[index + 2] |= mask;
	if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R)
		ab8500->mask[index + 1] |= mask;
	if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R)
		/* Here the falling IRQ is one bit lower */
		ab8500->mask[index] |= (mask << 1);
}

static void ab8500_irq_unmask(struct irq_data *data)
{
	struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data);
	unsigned int type = irqd_get_trigger_type(data);
	int offset = data->hwirq;
	int index = offset / 8;
	int mask = 1 << (offset % 8);

	if (type & IRQ_TYPE_EDGE_RISING)
		ab8500->mask[index] &= ~mask;

	/* The AB8500 GPIOs have two interrupts each (rising & falling). */
	if (type & IRQ_TYPE_EDGE_FALLING) {
		if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R)
			ab8500->mask[index + 2] &= ~mask;
		else if (offset >= AB9540_INT_GPIO50R &&
			 offset <= AB9540_INT_GPIO54R)
			ab8500->mask[index + 1] &= ~mask;
		else if (offset == AB8540_INT_GPIO43R ||
			 offset == AB8540_INT_GPIO44R)
			/* Here the falling IRQ is one bit lower */
			ab8500->mask[index] &= ~(mask << 1);
		else
			ab8500->mask[index] &= ~mask;
	} else {
		/* Satisfies the case where type is not set. */
		ab8500->mask[index] &= ~mask;
	}
}

static int ab8500_irq_set_type(struct irq_data *data, unsigned int type)
{
	return 0;
}

static struct irq_chip ab8500_irq_chip = {
	.name			= "ab8500",
	.irq_bus_lock		= ab8500_irq_lock,
	.irq_bus_sync_unlock	= ab8500_irq_sync_unlock,
	.irq_mask		= ab8500_irq_mask,
	.irq_disable		= ab8500_irq_mask,
	.irq_unmask		= ab8500_irq_unmask,
	.irq_set_type		= ab8500_irq_set_type,
};

static void update_latch_offset(u8 *offset, int i)
{
	/* Fix inconsistent ITFromLatch25 bit mapping... */
	if (unlikely(*offset == 17))
		*offset = 24;
	/* Fix inconsistent ab8540 bit mapping... */
	if (unlikely(*offset == 16))
		*offset = 25;
	if ((i == 3) && (*offset >= 24))
		*offset += 2;
}

static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
					int latch_offset, u8 latch_val)
{
	int int_bit, line, i;

	for (i = 0; i < ab8500->mask_size; i++)
		if (ab8500->irq_reg_offset[i] == latch_offset)
			break;

	if (i >= ab8500->mask_size) {
		dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
				latch_offset);
		return -ENXIO;
	}

	/* ignore masked out interrupts */
	latch_val &= ~ab8500->mask[i];

	while (latch_val) {
		int_bit = __ffs(latch_val);
		line = (i << 3) + int_bit;
		latch_val &= ~(1 << int_bit);

		/*
		 * This handles the falling edge hwirqs from the GPIO
		 * lines. Route them back to the line registered for the
		 * rising IRQ, as this is merely a flag for the same IRQ
		 * in linux terms.
		 */
		if (line >= AB8500_INT_GPIO6F && line <= AB8500_INT_GPIO41F)
			line -= 16;
		if (line >= AB9540_INT_GPIO50F && line <= AB9540_INT_GPIO54F)
			line -= 8;
		if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
			line += 1;

		handle_nested_irq(irq_create_mapping(ab8500->domain, line));
	}

	return 0;
}

static int ab8500_handle_hierarchical_latch(struct ab8500 *ab8500,
					int hier_offset, u8 hier_val)
{
	int latch_bit, status;
	u8 latch_offset, latch_val;

	do {
		latch_bit = __ffs(hier_val);
		latch_offset = (hier_offset << 3) + latch_bit;

		update_latch_offset(&latch_offset, hier_offset);

		status = get_register_interruptible(ab8500,
				AB8500_INTERRUPT,
				AB8500_IT_LATCH1_REG + latch_offset,
				&latch_val);
		if (status < 0 || latch_val == 0)
			goto discard;

		status = ab8500_handle_hierarchical_line(ab8500,
				latch_offset, latch_val);
		if (status < 0)
			return status;
discard:
		hier_val &= ~(1 << latch_bit);
	} while (hier_val);

	return 0;
}

static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev)
{
	struct ab8500 *ab8500 = dev;
	u8 i;

	dev_vdbg(ab8500->dev, "interrupt\n");

	/*  Hierarchical interrupt version */
	for (i = 0; i < (ab8500->it_latchhier_num); i++) {
		int status;
		u8 hier_val;

		status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
			AB8500_IT_LATCHHIER1_REG + i, &hier_val);
		if (status < 0 || hier_val == 0)
			continue;

		status = ab8500_handle_hierarchical_latch(ab8500, i, hier_val);
		if (status < 0)
			break;
	}
	return IRQ_HANDLED;
}

static int ab8500_irq_map(struct irq_domain *d, unsigned int virq,
				irq_hw_number_t hwirq)
{
	struct ab8500 *ab8500 = d->host_data;

	if (!ab8500)
		return -EINVAL;

	irq_set_chip_data(virq, ab8500);
	irq_set_chip_and_handler(virq, &ab8500_irq_chip,
				handle_simple_irq);
	irq_set_nested_thread(virq, 1);
	irq_set_noprobe(virq);

	return 0;
}

static const struct irq_domain_ops ab8500_irq_ops = {
	.map    = ab8500_irq_map,
	.xlate  = irq_domain_xlate_twocell,
};

static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np)
{
	int num_irqs;

	if (is_ab8540(ab8500))
		num_irqs = AB8540_NR_IRQS;
	else if (is_ab9540(ab8500))
		num_irqs = AB9540_NR_IRQS;
	else if (is_ab8505(ab8500))
		num_irqs = AB8505_NR_IRQS;
	else
		num_irqs = AB8500_NR_IRQS;

	/* If ->irq_base is zero this will give a linear mapping */
	ab8500->domain = irq_domain_add_simple(ab8500->dev->of_node,
					       num_irqs, 0,
					       &ab8500_irq_ops, ab8500);

	if (!ab8500->domain) {
		dev_err(ab8500->dev, "Failed to create irqdomain\n");
		return -ENODEV;
	}

	return 0;
}

int ab8500_suspend(struct ab8500 *ab8500)
{
	if (atomic_read(&ab8500->transfer_ongoing))
		return -EINVAL;

	return 0;
}

static const struct mfd_cell ab8500_bm_devs[] = {
	{
		.name = "ab8500-charger",
		.of_compatible = "stericsson,ab8500-charger",
		.platform_data = &ab8500_bm_data,
		.pdata_size = sizeof(ab8500_bm_data),
	},
	{
		.name = "ab8500-btemp",
		.of_compatible = "stericsson,ab8500-btemp",
		.platform_data = &ab8500_bm_data,
		.pdata_size = sizeof(ab8500_bm_data),
	},
	{
		.name = "ab8500-fg",
		.of_compatible = "stericsson,ab8500-fg",
		.platform_data = &ab8500_bm_data,
		.pdata_size = sizeof(ab8500_bm_data),
	},
	{
		.name = "ab8500-chargalg",
		.of_compatible = "stericsson,ab8500-chargalg",
		.platform_data = &ab8500_bm_data,
		.pdata_size = sizeof(ab8500_bm_data),
	},
};

static const struct mfd_cell ab8500_devs[] = {
#ifdef CONFIG_DEBUG_FS
	{
		.name = "ab8500-debug",
		.of_compatible = "stericsson,ab8500-debug",
	},
#endif
	{
		.name = "ab8500-sysctrl",
		.of_compatible = "stericsson,ab8500-sysctrl",
	},
	{
		.name = "ab8500-ext-regulator",
		.of_compatible = "stericsson,ab8500-ext-regulator",
	},
	{
		.name = "ab8500-regulator",
		.of_compatible = "stericsson,ab8500-regulator",
	},
	{
		.name = "abx500-clk",
		.of_compatible = "stericsson,abx500-clk",
	},
	{
		.name = "ab8500-gpadc",
		.of_compatible = "stericsson,ab8500-gpadc",
	},
	{
		.name = "ab8500-rtc",
		.of_compatible = "stericsson,ab8500-rtc",
	},
	{
		.name = "ab8500-acc-det",
		.of_compatible = "stericsson,ab8500-acc-det",
	},
	{

		.name = "ab8500-poweron-key",
		.of_compatible = "stericsson,ab8500-poweron-key",
	},
	{
		.name = "ab8500-pwm",
		.of_compatible = "stericsson,ab8500-pwm",
		.id = 1,
	},
	{
		.name = "ab8500-pwm",
		.of_compatible = "stericsson,ab8500-pwm",
		.id = 2,
	},
	{
		.name = "ab8500-pwm",
		.of_compatible = "stericsson,ab8500-pwm",
		.id = 3,
	},
	{
		.name = "ab8500-denc",
		.of_compatible = "stericsson,ab8500-denc",
	},
	{
		.name = "pinctrl-ab8500",
		.of_compatible = "stericsson,ab8500-gpio",
	},
	{
		.name = "abx500-temp",
		.of_compatible = "stericsson,abx500-temp",
	},
	{
		.name = "ab8500-usb",
		.of_compatible = "stericsson,ab8500-usb",
	},
	{
		.name = "ab8500-codec",
		.of_compatible = "stericsson,ab8500-codec",
	},
};

static const struct mfd_cell ab9540_devs[] = {
#ifdef CONFIG_DEBUG_FS
	{
		.name = "ab8500-debug",
	},
#endif
	{
		.name = "ab8500-sysctrl",
	},
	{
		.name = "ab8500-ext-regulator",
	},
	{
		.name = "ab8500-regulator",
	},
	{
		.name = "abx500-clk",
		.of_compatible = "stericsson,abx500-clk",
	},
	{
		.name = "ab8500-gpadc",
		.of_compatible = "stericsson,ab8500-gpadc",
	},
	{
		.name = "ab8500-rtc",
	},
	{
		.name = "ab8500-acc-det",
	},
	{
		.name = "ab8500-poweron-key",
	},
	{
		.name = "ab8500-pwm",
		.id = 1,
	},
	{
		.name = "abx500-temp",
	},
	{
		.name = "pinctrl-ab9540",
		.of_compatible = "stericsson,ab9540-gpio",
	},
	{
		.name = "ab9540-usb",
	},
	{
		.name = "ab9540-codec",
	},
	{
		.name = "ab-iddet",
	},
};

/* Device list for ab8505  */
static const struct mfd_cell ab8505_devs[] = {
#ifdef CONFIG_DEBUG_FS
	{
		.name = "ab8500-debug",
	},
#endif
	{
		.name = "ab8500-sysctrl",
	},
	{
		.name = "ab8500-regulator",
	},
	{
		.name = "abx500-clk",
		.of_compatible = "stericsson,abx500-clk",
	},
	{
		.name = "ab8500-gpadc",
		.of_compatible = "stericsson,ab8500-gpadc",
	},
	{
		.name = "ab8500-rtc",
	},
	{
		.name = "ab8500-acc-det",
	},
	{
		.name = "ab8500-poweron-key",
	},
	{
		.name = "ab8500-pwm",
		.id = 1,
	},
	{
		.name = "pinctrl-ab8505",
	},
	{
		.name = "ab8500-usb",
	},
	{
		.name = "ab8500-codec",
	},
	{
		.name = "ab-iddet",
	},
};

static const struct mfd_cell ab8540_devs[] = {
#ifdef CONFIG_DEBUG_FS
	{
		.name = "ab8500-debug",
	},
#endif
	{
		.name = "ab8500-sysctrl",
	},
	{
		.name = "ab8500-ext-regulator",
	},
	{
		.name = "ab8500-regulator",
	},
	{
		.name = "abx500-clk",
		.of_compatible = "stericsson,abx500-clk",
	},
	{
		.name = "ab8500-gpadc",
		.of_compatible = "stericsson,ab8500-gpadc",
	},
	{
		.name = "ab8500-acc-det",
	},
	{
		.name = "ab8500-poweron-key",
	},
	{
		.name = "ab8500-pwm",
		.id = 1,
	},
	{
		.name = "abx500-temp",
	},
	{
		.name = "pinctrl-ab8540",
	},
	{
		.name = "ab8540-usb",
	},
	{
		.name = "ab8540-codec",
	},
	{
		.name = "ab-iddet",
	},
};

static const struct mfd_cell ab8540_cut1_devs[] = {
	{
		.name = "ab8500-rtc",
		.of_compatible = "stericsson,ab8500-rtc",
	},
};

static const struct mfd_cell ab8540_cut2_devs[] = {
	{
		.name = "ab8540-rtc",
		.of_compatible = "stericsson,ab8540-rtc",
	},
};

static ssize_t show_chip_id(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct ab8500 *ab8500;

	ab8500 = dev_get_drvdata(dev);

	return sprintf(buf, "%#x\n", ab8500 ? ab8500->chip_id : -EINVAL);
}

/*
 * ab8500 has switched off due to (SWITCH_OFF_STATUS):
 * 0x01 Swoff bit programming
 * 0x02 Thermal protection activation
 * 0x04 Vbat lower then BattOk falling threshold
 * 0x08 Watchdog expired
 * 0x10 Non presence of 32kHz clock
 * 0x20 Battery level lower than power on reset threshold
 * 0x40 Power on key 1 pressed longer than 10 seconds
 * 0x80 DB8500 thermal shutdown
 */
static ssize_t show_switch_off_status(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	int ret;
	u8 value;
	struct ab8500 *ab8500;

	ab8500 = dev_get_drvdata(dev);
	ret = get_register_interruptible(ab8500, AB8500_RTC,
		AB8500_SWITCH_OFF_STATUS, &value);
	if (ret < 0)
		return ret;
	return sprintf(buf, "%#x\n", value);
}

/* use mask and set to override the register turn_on_stat value */
void ab8500_override_turn_on_stat(u8 mask, u8 set)
{
	spin_lock(&on_stat_lock);
	turn_on_stat_mask = mask;
	turn_on_stat_set = set;
	spin_unlock(&on_stat_lock);
}

/*
 * ab8500 has turned on due to (TURN_ON_STATUS):
 * 0x01 PORnVbat
 * 0x02 PonKey1dbF
 * 0x04 PonKey2dbF
 * 0x08 RTCAlarm
 * 0x10 MainChDet
 * 0x20 VbusDet
 * 0x40 UsbIDDetect
 * 0x80 Reserved
 */
static ssize_t show_turn_on_status(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	int ret;
	u8 value;
	struct ab8500 *ab8500;

	ab8500 = dev_get_drvdata(dev);
	ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
		AB8500_TURN_ON_STATUS, &value);
	if (ret < 0)
		return ret;

	/*
	 * In L9540, turn_on_status register is not updated correctly if
	 * the device is rebooted with AC/USB charger connected. Due to
	 * this, the device boots android instead of entering into charge
	 * only mode. Read the AC/USB status register to detect the charger
	 * presence and update the turn on status manually.
	 */
	if (is_ab9540(ab8500)) {
		spin_lock(&on_stat_lock);
		value = (value & turn_on_stat_mask) | turn_on_stat_set;
		spin_unlock(&on_stat_lock);
	}

	return sprintf(buf, "%#x\n", value);
}

static ssize_t show_turn_on_status_2(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	int ret;
	u8 value;
	struct ab8500 *ab8500;

	ab8500 = dev_get_drvdata(dev);
	ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
		AB8505_TURN_ON_STATUS_2, &value);
	if (ret < 0)
		return ret;
	return sprintf(buf, "%#x\n", (value & 0x1));
}

static ssize_t show_ab9540_dbbrstn(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	struct ab8500 *ab8500;
	int ret;
	u8 value;

	ab8500 = dev_get_drvdata(dev);

	ret = get_register_interruptible(ab8500, AB8500_REGU_CTRL2,
		AB9540_MODEM_CTRL2_REG, &value);
	if (ret < 0)
		return ret;

	return sprintf(buf, "%d\n",
			(value & AB9540_MODEM_CTRL2_SWDBBRSTN_BIT) ? 1 : 0);
}

static ssize_t store_ab9540_dbbrstn(struct device *dev,
	struct device_attribute *attr, const char *buf, size_t count)
{
	struct ab8500 *ab8500;
	int ret = count;
	int err;
	u8 bitvalues;

	ab8500 = dev_get_drvdata(dev);

	if (count > 0) {
		switch (buf[0]) {
		case '0':
			bitvalues = 0;
			break;
		case '1':
			bitvalues = AB9540_MODEM_CTRL2_SWDBBRSTN_BIT;
			break;
		default:
			goto exit;
		}

		err = mask_and_set_register_interruptible(ab8500,
			AB8500_REGU_CTRL2, AB9540_MODEM_CTRL2_REG,
			AB9540_MODEM_CTRL2_SWDBBRSTN_BIT, bitvalues);
		if (err)
			dev_info(ab8500->dev,
				"Failed to set DBBRSTN %c, err %#x\n",
				buf[0], err);
	}

exit:
	return ret;
}

static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
static DEVICE_ATTR(turn_on_status_2, S_IRUGO, show_turn_on_status_2, NULL);
static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR,
			show_ab9540_dbbrstn, store_ab9540_dbbrstn);

static struct attribute *ab8500_sysfs_entries[] = {
	&dev_attr_chip_id.attr,
	&dev_attr_switch_off_status.attr,
	&dev_attr_turn_on_status.attr,
	NULL,
};

static struct attribute *ab8505_sysfs_entries[] = {
	&dev_attr_turn_on_status_2.attr,
	NULL,
};

static struct attribute *ab9540_sysfs_entries[] = {
	&dev_attr_chip_id.attr,
	&dev_attr_switch_off_status.attr,
	&dev_attr_turn_on_status.attr,
	&dev_attr_dbbrstn.attr,
	NULL,
};

static struct attribute_group ab8500_attr_group = {
	.attrs	= ab8500_sysfs_entries,
};

static struct attribute_group ab8505_attr_group = {
	.attrs	= ab8505_sysfs_entries,
};

static struct attribute_group ab9540_attr_group = {
	.attrs	= ab9540_sysfs_entries,
};

static int ab8500_probe(struct platform_device *pdev)
{
	static const char * const switch_off_status[] = {
		"Swoff bit programming",
		"Thermal protection activation",
		"Vbat lower then BattOk falling threshold",
		"Watchdog expired",
		"Non presence of 32kHz clock",
		"Battery level lower than power on reset threshold",
		"Power on key 1 pressed longer than 10 seconds",
		"DB8500 thermal shutdown"};
	static const char * const turn_on_status[] = {
		"Battery rising (Vbat)",
		"Power On Key 1 dbF",
		"Power On Key 2 dbF",
		"RTC Alarm",
		"Main Charger Detect",
		"Vbus Detect (USB)",
		"USB ID Detect",
		"UART Factory Mode Detect"};
	const struct platform_device_id *platid = platform_get_device_id(pdev);
	enum ab8500_version version = AB8500_VERSION_UNDEFINED;
	struct device_node *np = pdev->dev.of_node;
	struct ab8500 *ab8500;
	struct resource *resource;
	int ret;
	int i;
	u8 value;

	ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
	if (!ab8500)
		return -ENOMEM;

	ab8500->dev = &pdev->dev;

	resource = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (!resource) {
		dev_err(&pdev->dev, "no IRQ resource\n");
		return -ENODEV;
	}

	ab8500->irq = resource->start;

	ab8500->read = ab8500_prcmu_read;
	ab8500->write = ab8500_prcmu_write;
	ab8500->write_masked = ab8500_prcmu_write_masked;

	mutex_init(&ab8500->lock);
	mutex_init(&ab8500->irq_lock);
	atomic_set(&ab8500->transfer_ongoing, 0);

	platform_set_drvdata(pdev, ab8500);

	if (platid)
		version = platid->driver_data;

	if (version != AB8500_VERSION_UNDEFINED)
		ab8500->version = version;
	else {
		ret = get_register_interruptible(ab8500, AB8500_MISC,
			AB8500_IC_NAME_REG, &value);
		if (ret < 0) {
			dev_err(&pdev->dev, "could not probe HW\n");
			return ret;
		}

		ab8500->version = value;
	}

	ret = get_register_interruptible(ab8500, AB8500_MISC,
		AB8500_REV_REG, &value);
	if (ret < 0)
		return ret;

	ab8500->chip_id = value;

	dev_info(ab8500->dev, "detected chip, %s rev. %1x.%1x\n",
			ab8500_version_str[ab8500->version],
			ab8500->chip_id >> 4,
			ab8500->chip_id & 0x0F);

	/* Configure AB8540 */
	if (is_ab8540(ab8500)) {
		ab8500->mask_size = AB8540_NUM_IRQ_REGS;
		ab8500->irq_reg_offset = ab8540_irq_regoffset;
		ab8500->it_latchhier_num = AB8540_IT_LATCHHIER_NUM;
	} /* Configure AB8500 or AB9540 IRQ */
	else if (is_ab9540(ab8500) || is_ab8505(ab8500)) {
		ab8500->mask_size = AB9540_NUM_IRQ_REGS;
		ab8500->irq_reg_offset = ab9540_irq_regoffset;
		ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM;
	} else {
		ab8500->mask_size = AB8500_NUM_IRQ_REGS;
		ab8500->irq_reg_offset = ab8500_irq_regoffset;
		ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM;
	}
	ab8500->mask = devm_kzalloc(&pdev->dev, ab8500->mask_size,
				    GFP_KERNEL);
	if (!ab8500->mask)
		return -ENOMEM;
	ab8500->oldmask = devm_kzalloc(&pdev->dev, ab8500->mask_size,
				       GFP_KERNEL);
	if (!ab8500->oldmask)
		return -ENOMEM;

	/*
	 * ab8500 has switched off due to (SWITCH_OFF_STATUS):
	 * 0x01 Swoff bit programming
	 * 0x02 Thermal protection activation
	 * 0x04 Vbat lower then BattOk falling threshold
	 * 0x08 Watchdog expired
	 * 0x10 Non presence of 32kHz clock
	 * 0x20 Battery level lower than power on reset threshold
	 * 0x40 Power on key 1 pressed longer than 10 seconds
	 * 0x80 DB8500 thermal shutdown
	 */

	ret = get_register_interruptible(ab8500, AB8500_RTC,
		AB8500_SWITCH_OFF_STATUS, &value);
	if (ret < 0)
		return ret;
	dev_info(ab8500->dev, "switch off cause(s) (%#x): ", value);

	if (value) {
		for (i = 0; i < ARRAY_SIZE(switch_off_status); i++) {
			if (value & 1)
				pr_cont(" \"%s\"", switch_off_status[i]);
			value = value >> 1;

		}
		pr_cont("\n");
	} else {
		pr_cont(" None\n");
	}
	ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
		AB8500_TURN_ON_STATUS, &value);
	if (ret < 0)
		return ret;
	dev_info(ab8500->dev, "turn on reason(s) (%#x): ", value);

	if (value) {
		for (i = 0; i < ARRAY_SIZE(turn_on_status); i++) {
			if (value & 1)
				pr_cont("\"%s\" ", turn_on_status[i]);
			value = value >> 1;
		}
		pr_cont("\n");
	} else {
		pr_cont("None\n");
	}

	if (is_ab9540(ab8500)) {
		ret = get_register_interruptible(ab8500, AB8500_CHARGER,
			AB8500_CH_USBCH_STAT1_REG, &value);
		if (ret < 0)
			return ret;
		if ((value & VBUS_DET_DBNC1) && (value & VBUS_DET_DBNC100))
			ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON,
						     AB8500_VBUS_DET);
	}

	/* Clear and mask all interrupts */
	for (i = 0; i < ab8500->mask_size; i++) {
		/*
		 * Interrupt register 12 doesn't exist prior to AB8500 version
		 * 2.0
		 */
		if (ab8500->irq_reg_offset[i] == 11 &&
				is_ab8500_1p1_or_earlier(ab8500))
			continue;

		if (ab8500->irq_reg_offset[i] < 0)
			continue;

		get_register_interruptible(ab8500, AB8500_INTERRUPT,
			AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i],
			&value);
		set_register_interruptible(ab8500, AB8500_INTERRUPT,
			AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i], 0xff);
	}

	ret = abx500_register_ops(ab8500->dev, &ab8500_ops);
	if (ret)
		return ret;

	for (i = 0; i < ab8500->mask_size; i++)
		ab8500->mask[i] = ab8500->oldmask[i] = 0xff;

	ret = ab8500_irq_init(ab8500, np);
	if (ret)
		return ret;

	ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
			ab8500_hierarchical_irq,
			IRQF_ONESHOT | IRQF_NO_SUSPEND,
			"ab8500", ab8500);
	if (ret)
		return ret;

	if (is_ab9540(ab8500))
		ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
				ARRAY_SIZE(ab9540_devs), NULL,
				0, ab8500->domain);
	else if (is_ab8540(ab8500)) {
		ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs,
			      ARRAY_SIZE(ab8540_devs), NULL,
			      0, ab8500->domain);
		if (ret)
			return ret;

		if (is_ab8540_1p2_or_earlier(ab8500))
			ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut1_devs,
			      ARRAY_SIZE(ab8540_cut1_devs), NULL,
			      0, ab8500->domain);
		else /* ab8540 >= cut2 */
			ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut2_devs,
			      ARRAY_SIZE(ab8540_cut2_devs), NULL,
			      0, ab8500->domain);
	} else if (is_ab8505(ab8500))
		ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs,
			      ARRAY_SIZE(ab8505_devs), NULL,
			      0, ab8500->domain);
	else
		ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
				ARRAY_SIZE(ab8500_devs), NULL,
				0, ab8500->domain);
	if (ret)
		return ret;

	if (!no_bm) {
		/* Add battery management devices */
		ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
				      ARRAY_SIZE(ab8500_bm_devs), NULL,
				      0, ab8500->domain);
		if (ret)
			dev_err(ab8500->dev, "error adding bm devices\n");
	}

	if (((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
			ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500))
		ret = sysfs_create_group(&ab8500->dev->kobj,
					&ab9540_attr_group);
	else
		ret = sysfs_create_group(&ab8500->dev->kobj,
					&ab8500_attr_group);

	if ((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
			ab8500->chip_id >= AB8500_CUT2P0)
		ret = sysfs_create_group(&ab8500->dev->kobj,
					 &ab8505_attr_group);

	if (ret)
		dev_err(ab8500->dev, "error creating sysfs entries\n");

	return ret;
}

static int ab8500_remove(struct platform_device *pdev)
{
	struct ab8500 *ab8500 = platform_get_drvdata(pdev);

	if (((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
			ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500))
		sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group);
	else
		sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group);

	if ((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
			ab8500->chip_id >= AB8500_CUT2P0)
		sysfs_remove_group(&ab8500->dev->kobj, &ab8505_attr_group);

	mfd_remove_devices(ab8500->dev);

	return 0;
}

static const struct platform_device_id ab8500_id[] = {
	{ "ab8500-core", AB8500_VERSION_AB8500 },
	{ "ab8505-i2c", AB8500_VERSION_AB8505 },
	{ "ab9540-i2c", AB8500_VERSION_AB9540 },
	{ "ab8540-i2c", AB8500_VERSION_AB8540 },
	{ }
};

static struct platform_driver ab8500_core_driver = {
	.driver = {
		.name = "ab8500-core",
	},
	.probe	= ab8500_probe,
	.remove	= ab8500_remove,
	.id_table = ab8500_id,
};

static int __init ab8500_core_init(void)
{
	return platform_driver_register(&ab8500_core_driver);
}

static void __exit ab8500_core_exit(void)
{
	platform_driver_unregister(&ab8500_core_driver);
}
core_initcall(ab8500_core_init);
module_exit(ab8500_core_exit);

MODULE_AUTHOR("Mattias Wallin, Srinidhi Kasagar, Rabin Vincent");
MODULE_DESCRIPTION("AB8500 MFD core");
MODULE_LICENSE("GPL v2");