Olliver Schinagl | c5754b5 | 2014-02-22 16:53:36 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Allwinner sunxi AHCI SATA platform driver |
| 3 | * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl> |
| 4 | * Copyright 2014 Hans de Goede <hdegoede@redhat.com> |
| 5 | * |
| 6 | * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov |
| 7 | * Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>, |
| 8 | * Daniel Wang <danielwang@allwinnertech.com> |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify it |
| 11 | * under the terms and conditions of the GNU General Public License, |
| 12 | * version 2, as published by the Free Software Foundation. |
| 13 | * |
| 14 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 17 | * more details. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/ahci_platform.h> |
| 21 | #include <linux/clk.h> |
| 22 | #include <linux/errno.h> |
| 23 | #include <linux/kernel.h> |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/of_device.h> |
| 26 | #include <linux/platform_device.h> |
| 27 | #include <linux/regulator/consumer.h> |
| 28 | #include "ahci.h" |
| 29 | |
Bartlomiej Zolnierkiewicz | cdf457a | 2014-03-17 14:08:12 +0100 | [diff] [blame] | 30 | #define AHCI_BISTAFR 0x00a0 |
| 31 | #define AHCI_BISTCR 0x00a4 |
| 32 | #define AHCI_BISTFCTR 0x00a8 |
| 33 | #define AHCI_BISTSR 0x00ac |
| 34 | #define AHCI_BISTDECR 0x00b0 |
| 35 | #define AHCI_DIAGNR0 0x00b4 |
| 36 | #define AHCI_DIAGNR1 0x00b8 |
| 37 | #define AHCI_OOBR 0x00bc |
| 38 | #define AHCI_PHYCS0R 0x00c0 |
| 39 | #define AHCI_PHYCS1R 0x00c4 |
| 40 | #define AHCI_PHYCS2R 0x00c8 |
| 41 | #define AHCI_TIMER1MS 0x00e0 |
| 42 | #define AHCI_GPARAM1R 0x00e8 |
| 43 | #define AHCI_GPARAM2R 0x00ec |
| 44 | #define AHCI_PPARAMR 0x00f0 |
| 45 | #define AHCI_TESTR 0x00f4 |
| 46 | #define AHCI_VERSIONR 0x00f8 |
| 47 | #define AHCI_IDR 0x00fc |
| 48 | #define AHCI_RWCR 0x00fc |
| 49 | #define AHCI_P0DMACR 0x0170 |
| 50 | #define AHCI_P0PHYCR 0x0178 |
| 51 | #define AHCI_P0PHYSR 0x017c |
Olliver Schinagl | c5754b5 | 2014-02-22 16:53:36 +0100 | [diff] [blame] | 52 | |
| 53 | static void sunxi_clrbits(void __iomem *reg, u32 clr_val) |
| 54 | { |
| 55 | u32 reg_val; |
| 56 | |
| 57 | reg_val = readl(reg); |
| 58 | reg_val &= ~(clr_val); |
| 59 | writel(reg_val, reg); |
| 60 | } |
| 61 | |
| 62 | static void sunxi_setbits(void __iomem *reg, u32 set_val) |
| 63 | { |
| 64 | u32 reg_val; |
| 65 | |
| 66 | reg_val = readl(reg); |
| 67 | reg_val |= set_val; |
| 68 | writel(reg_val, reg); |
| 69 | } |
| 70 | |
| 71 | static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val) |
| 72 | { |
| 73 | u32 reg_val; |
| 74 | |
| 75 | reg_val = readl(reg); |
| 76 | reg_val &= ~(clr_val); |
| 77 | reg_val |= set_val; |
| 78 | writel(reg_val, reg); |
| 79 | } |
| 80 | |
| 81 | static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift) |
| 82 | { |
| 83 | return (readl(reg) >> shift) & mask; |
| 84 | } |
| 85 | |
| 86 | static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base) |
| 87 | { |
| 88 | u32 reg_val; |
| 89 | int timeout; |
| 90 | |
| 91 | /* This magic is from the original code */ |
| 92 | writel(0, reg_base + AHCI_RWCR); |
Hans de Goede | d2ec147 | 2014-02-23 12:52:41 +0100 | [diff] [blame] | 93 | msleep(5); |
Olliver Schinagl | c5754b5 | 2014-02-22 16:53:36 +0100 | [diff] [blame] | 94 | |
| 95 | sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19)); |
| 96 | sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, |
| 97 | (0x7 << 24), |
| 98 | (0x5 << 24) | BIT(23) | BIT(18)); |
| 99 | sunxi_clrsetbits(reg_base + AHCI_PHYCS1R, |
| 100 | (0x3 << 16) | (0x1f << 8) | (0x3 << 6), |
| 101 | (0x2 << 16) | (0x6 << 8) | (0x2 << 6)); |
| 102 | sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15)); |
| 103 | sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19)); |
| 104 | sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, |
| 105 | (0x7 << 20), (0x3 << 20)); |
| 106 | sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, |
| 107 | (0x1f << 5), (0x19 << 5)); |
Hans de Goede | d2ec147 | 2014-02-23 12:52:41 +0100 | [diff] [blame] | 108 | msleep(5); |
Olliver Schinagl | c5754b5 | 2014-02-22 16:53:36 +0100 | [diff] [blame] | 109 | |
| 110 | sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19)); |
| 111 | |
| 112 | timeout = 250; /* Power up takes aprox 50 us */ |
| 113 | do { |
| 114 | reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28); |
| 115 | if (reg_val == 0x02) |
| 116 | break; |
| 117 | |
| 118 | if (--timeout == 0) { |
| 119 | dev_err(dev, "PHY power up failed.\n"); |
| 120 | return -EIO; |
| 121 | } |
| 122 | udelay(1); |
| 123 | } while (1); |
| 124 | |
| 125 | sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24)); |
| 126 | |
| 127 | timeout = 100; /* Calibration takes aprox 10 us */ |
| 128 | do { |
| 129 | reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24); |
| 130 | if (reg_val == 0x00) |
| 131 | break; |
| 132 | |
| 133 | if (--timeout == 0) { |
| 134 | dev_err(dev, "PHY calibration failed.\n"); |
| 135 | return -EIO; |
| 136 | } |
| 137 | udelay(1); |
| 138 | } while (1); |
| 139 | |
Hans de Goede | d2ec147 | 2014-02-23 12:52:41 +0100 | [diff] [blame] | 140 | msleep(15); |
Olliver Schinagl | c5754b5 | 2014-02-22 16:53:36 +0100 | [diff] [blame] | 141 | |
| 142 | writel(0x7, reg_base + AHCI_RWCR); |
| 143 | |
| 144 | return 0; |
| 145 | } |
| 146 | |
| 147 | static void ahci_sunxi_start_engine(struct ata_port *ap) |
| 148 | { |
| 149 | void __iomem *port_mmio = ahci_port_base(ap); |
| 150 | struct ahci_host_priv *hpriv = ap->host->private_data; |
| 151 | |
| 152 | /* Setup DMA before DMA start */ |
| 153 | sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400); |
| 154 | |
| 155 | /* Start DMA */ |
| 156 | sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START); |
| 157 | } |
| 158 | |
| 159 | static const struct ata_port_info ahci_sunxi_port_info = { |
| 160 | AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | |
| 161 | AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), |
| 162 | .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, |
| 163 | .pio_mask = ATA_PIO4, |
| 164 | .udma_mask = ATA_UDMA6, |
| 165 | .port_ops = &ahci_platform_ops, |
| 166 | }; |
| 167 | |
| 168 | static int ahci_sunxi_probe(struct platform_device *pdev) |
| 169 | { |
| 170 | struct device *dev = &pdev->dev; |
| 171 | struct ahci_host_priv *hpriv; |
| 172 | int rc; |
| 173 | |
| 174 | hpriv = ahci_platform_get_resources(pdev); |
| 175 | if (IS_ERR(hpriv)) |
| 176 | return PTR_ERR(hpriv); |
| 177 | |
| 178 | hpriv->start_engine = ahci_sunxi_start_engine; |
| 179 | |
| 180 | rc = ahci_platform_enable_resources(hpriv); |
| 181 | if (rc) |
| 182 | return rc; |
| 183 | |
| 184 | rc = ahci_sunxi_phy_init(dev, hpriv->mmio); |
| 185 | if (rc) |
| 186 | goto disable_resources; |
| 187 | |
| 188 | rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, 0, 0); |
| 189 | if (rc) |
| 190 | goto disable_resources; |
| 191 | |
| 192 | return 0; |
| 193 | |
| 194 | disable_resources: |
| 195 | ahci_platform_disable_resources(hpriv); |
| 196 | return rc; |
| 197 | } |
| 198 | |
| 199 | #ifdef CONFIG_PM_SLEEP |
Bartlomiej Zolnierkiewicz | 1bf9d88 | 2014-03-17 14:06:57 +0100 | [diff] [blame] | 200 | static int ahci_sunxi_resume(struct device *dev) |
Olliver Schinagl | c5754b5 | 2014-02-22 16:53:36 +0100 | [diff] [blame] | 201 | { |
| 202 | struct ata_host *host = dev_get_drvdata(dev); |
| 203 | struct ahci_host_priv *hpriv = host->private_data; |
| 204 | int rc; |
| 205 | |
| 206 | rc = ahci_platform_enable_resources(hpriv); |
| 207 | if (rc) |
| 208 | return rc; |
| 209 | |
| 210 | rc = ahci_sunxi_phy_init(dev, hpriv->mmio); |
| 211 | if (rc) |
| 212 | goto disable_resources; |
| 213 | |
| 214 | rc = ahci_platform_resume_host(dev); |
| 215 | if (rc) |
| 216 | goto disable_resources; |
| 217 | |
| 218 | return 0; |
| 219 | |
| 220 | disable_resources: |
| 221 | ahci_platform_disable_resources(hpriv); |
| 222 | return rc; |
| 223 | } |
| 224 | #endif |
| 225 | |
| 226 | static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend, |
| 227 | ahci_sunxi_resume); |
| 228 | |
| 229 | static const struct of_device_id ahci_sunxi_of_match[] = { |
| 230 | { .compatible = "allwinner,sun4i-a10-ahci", }, |
| 231 | { }, |
| 232 | }; |
| 233 | MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match); |
| 234 | |
| 235 | static struct platform_driver ahci_sunxi_driver = { |
| 236 | .probe = ahci_sunxi_probe, |
| 237 | .remove = ata_platform_remove_one, |
| 238 | .driver = { |
| 239 | .name = "ahci-sunxi", |
| 240 | .owner = THIS_MODULE, |
| 241 | .of_match_table = ahci_sunxi_of_match, |
| 242 | .pm = &ahci_sunxi_pm_ops, |
| 243 | }, |
| 244 | }; |
| 245 | module_platform_driver(ahci_sunxi_driver); |
| 246 | |
| 247 | MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver"); |
| 248 | MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>"); |
| 249 | MODULE_LICENSE("GPL"); |