blob: 11467e17bdd8fcf464140ab8706f1bb3ed7095b2 [file] [log] [blame]
Gilad Avidov0b9641f2015-03-25 11:37:31 -06001/*
2 * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
Kenneth Heitke5a86bf32014-02-12 13:44:22 -06003 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13#include <linux/kernel.h>
14#include <linux/errno.h>
15#include <linux/idr.h>
16#include <linux/slab.h>
17#include <linux/module.h>
18#include <linux/of.h>
19#include <linux/of_device.h>
20#include <linux/platform_device.h>
21#include <linux/spmi.h>
Kenneth Heitke5a86bf32014-02-12 13:44:22 -060022#include <linux/pm_runtime.h>
23
24#include <dt-bindings/spmi/spmi.h>
Ankit Guptaa9fce372015-06-22 16:38:46 -060025#define CREATE_TRACE_POINTS
26#include <trace/events/spmi.h>
Kenneth Heitke5a86bf32014-02-12 13:44:22 -060027
28static DEFINE_IDA(ctrl_ida);
29
30static void spmi_dev_release(struct device *dev)
31{
32 struct spmi_device *sdev = to_spmi_device(dev);
33 kfree(sdev);
34}
35
36static const struct device_type spmi_dev_type = {
37 .release = spmi_dev_release,
38};
39
40static void spmi_ctrl_release(struct device *dev)
41{
42 struct spmi_controller *ctrl = to_spmi_controller(dev);
43 ida_simple_remove(&ctrl_ida, ctrl->nr);
44 kfree(ctrl);
45}
46
47static const struct device_type spmi_ctrl_type = {
48 .release = spmi_ctrl_release,
49};
50
Kenneth Heitke5a86bf32014-02-12 13:44:22 -060051static int spmi_device_match(struct device *dev, struct device_driver *drv)
52{
53 if (of_driver_match_device(dev, drv))
54 return 1;
55
56 if (drv->name)
57 return strncmp(dev_name(dev), drv->name,
58 SPMI_NAME_SIZE) == 0;
59
60 return 0;
61}
62
63/**
64 * spmi_device_add() - add a device previously constructed via spmi_device_alloc()
65 * @sdev: spmi_device to be added
66 */
67int spmi_device_add(struct spmi_device *sdev)
68{
69 struct spmi_controller *ctrl = sdev->ctrl;
70 int err;
71
72 dev_set_name(&sdev->dev, "%d-%02x", ctrl->nr, sdev->usid);
73
74 err = device_add(&sdev->dev);
75 if (err < 0) {
76 dev_err(&sdev->dev, "Can't add %s, status %d\n",
77 dev_name(&sdev->dev), err);
78 goto err_device_add;
79 }
80
81 dev_dbg(&sdev->dev, "device %s registered\n", dev_name(&sdev->dev));
82
83err_device_add:
84 return err;
85}
86EXPORT_SYMBOL_GPL(spmi_device_add);
87
88/**
89 * spmi_device_remove(): remove an SPMI device
90 * @sdev: spmi_device to be removed
91 */
92void spmi_device_remove(struct spmi_device *sdev)
93{
94 device_unregister(&sdev->dev);
95}
96EXPORT_SYMBOL_GPL(spmi_device_remove);
97
98static inline int
99spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid)
100{
Ankit Guptaa9fce372015-06-22 16:38:46 -0600101 int ret;
102
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600103 if (!ctrl || !ctrl->cmd || ctrl->dev.type != &spmi_ctrl_type)
104 return -EINVAL;
105
Ankit Guptaa9fce372015-06-22 16:38:46 -0600106 ret = ctrl->cmd(ctrl, opcode, sid);
107 trace_spmi_cmd(opcode, sid, ret);
108 return ret;
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600109}
110
111static inline int spmi_read_cmd(struct spmi_controller *ctrl, u8 opcode,
112 u8 sid, u16 addr, u8 *buf, size_t len)
113{
Ankit Guptaa9fce372015-06-22 16:38:46 -0600114 int ret;
115
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600116 if (!ctrl || !ctrl->read_cmd || ctrl->dev.type != &spmi_ctrl_type)
117 return -EINVAL;
118
Ankit Guptaa9fce372015-06-22 16:38:46 -0600119 trace_spmi_read_begin(opcode, sid, addr);
120 ret = ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len);
121 trace_spmi_read_end(opcode, sid, addr, ret, len, buf);
122 return ret;
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600123}
124
125static inline int spmi_write_cmd(struct spmi_controller *ctrl, u8 opcode,
126 u8 sid, u16 addr, const u8 *buf, size_t len)
127{
Ankit Guptaa9fce372015-06-22 16:38:46 -0600128 int ret;
129
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600130 if (!ctrl || !ctrl->write_cmd || ctrl->dev.type != &spmi_ctrl_type)
131 return -EINVAL;
132
Ankit Guptaa9fce372015-06-22 16:38:46 -0600133 trace_spmi_write_begin(opcode, sid, addr, len, buf);
134 ret = ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len);
135 trace_spmi_write_end(opcode, sid, addr, ret);
136 return ret;
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600137}
138
139/**
140 * spmi_register_read() - register read
141 * @sdev: SPMI device.
142 * @addr: slave register address (5-bit address).
143 * @buf: buffer to be populated with data from the Slave.
144 *
145 * Reads 1 byte of data from a Slave device register.
146 */
147int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf)
148{
149 /* 5-bit register address */
150 if (addr > 0x1F)
151 return -EINVAL;
152
153 return spmi_read_cmd(sdev->ctrl, SPMI_CMD_READ, sdev->usid, addr,
154 buf, 1);
155}
156EXPORT_SYMBOL_GPL(spmi_register_read);
157
158/**
159 * spmi_ext_register_read() - extended register read
160 * @sdev: SPMI device.
161 * @addr: slave register address (8-bit address).
162 * @buf: buffer to be populated with data from the Slave.
163 * @len: the request number of bytes to read (up to 16 bytes).
164 *
165 * Reads up to 16 bytes of data from the extended register space on a
166 * Slave device.
167 */
168int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
169 size_t len)
170{
171 /* 8-bit register address, up to 16 bytes */
172 if (len == 0 || len > 16)
173 return -EINVAL;
174
175 return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READ, sdev->usid, addr,
176 buf, len);
177}
178EXPORT_SYMBOL_GPL(spmi_ext_register_read);
179
180/**
181 * spmi_ext_register_readl() - extended register read long
182 * @sdev: SPMI device.
183 * @addr: slave register address (16-bit address).
184 * @buf: buffer to be populated with data from the Slave.
185 * @len: the request number of bytes to read (up to 8 bytes).
186 *
187 * Reads up to 8 bytes of data from the extended register space on a
188 * Slave device using 16-bit address.
189 */
190int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
191 size_t len)
192{
193 /* 16-bit register address, up to 8 bytes */
194 if (len == 0 || len > 8)
195 return -EINVAL;
196
197 return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READL, sdev->usid, addr,
198 buf, len);
199}
200EXPORT_SYMBOL_GPL(spmi_ext_register_readl);
201
202/**
203 * spmi_register_write() - register write
204 * @sdev: SPMI device
205 * @addr: slave register address (5-bit address).
206 * @data: buffer containing the data to be transferred to the Slave.
207 *
208 * Writes 1 byte of data to a Slave device register.
209 */
210int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data)
211{
212 /* 5-bit register address */
213 if (addr > 0x1F)
214 return -EINVAL;
215
216 return spmi_write_cmd(sdev->ctrl, SPMI_CMD_WRITE, sdev->usid, addr,
217 &data, 1);
218}
219EXPORT_SYMBOL_GPL(spmi_register_write);
220
221/**
222 * spmi_register_zero_write() - register zero write
223 * @sdev: SPMI device.
224 * @data: the data to be written to register 0 (7-bits).
225 *
226 * Writes data to register 0 of the Slave device.
227 */
228int spmi_register_zero_write(struct spmi_device *sdev, u8 data)
229{
230 return spmi_write_cmd(sdev->ctrl, SPMI_CMD_ZERO_WRITE, sdev->usid, 0,
231 &data, 1);
232}
233EXPORT_SYMBOL_GPL(spmi_register_zero_write);
234
235/**
236 * spmi_ext_register_write() - extended register write
237 * @sdev: SPMI device.
238 * @addr: slave register address (8-bit address).
239 * @buf: buffer containing the data to be transferred to the Slave.
240 * @len: the request number of bytes to read (up to 16 bytes).
241 *
242 * Writes up to 16 bytes of data to the extended register space of a
243 * Slave device.
244 */
245int spmi_ext_register_write(struct spmi_device *sdev, u8 addr, const u8 *buf,
246 size_t len)
247{
248 /* 8-bit register address, up to 16 bytes */
249 if (len == 0 || len > 16)
250 return -EINVAL;
251
252 return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITE, sdev->usid, addr,
253 buf, len);
254}
255EXPORT_SYMBOL_GPL(spmi_ext_register_write);
256
257/**
258 * spmi_ext_register_writel() - extended register write long
259 * @sdev: SPMI device.
260 * @addr: slave register address (16-bit address).
261 * @buf: buffer containing the data to be transferred to the Slave.
262 * @len: the request number of bytes to read (up to 8 bytes).
263 *
264 * Writes up to 8 bytes of data to the extended register space of a
265 * Slave device using 16-bit address.
266 */
267int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr, const u8 *buf,
268 size_t len)
269{
270 /* 4-bit Slave Identifier, 16-bit register address, up to 8 bytes */
271 if (len == 0 || len > 8)
272 return -EINVAL;
273
274 return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITEL, sdev->usid,
275 addr, buf, len);
276}
277EXPORT_SYMBOL_GPL(spmi_ext_register_writel);
278
279/**
280 * spmi_command_reset() - sends RESET command to the specified slave
281 * @sdev: SPMI device.
282 *
283 * The Reset command initializes the Slave and forces all registers to
284 * their reset values. The Slave shall enter the STARTUP state after
285 * receiving a Reset command.
286 */
287int spmi_command_reset(struct spmi_device *sdev)
288{
289 return spmi_cmd(sdev->ctrl, SPMI_CMD_RESET, sdev->usid);
290}
291EXPORT_SYMBOL_GPL(spmi_command_reset);
292
293/**
294 * spmi_command_sleep() - sends SLEEP command to the specified SPMI device
295 * @sdev: SPMI device.
296 *
297 * The Sleep command causes the Slave to enter the user defined SLEEP state.
298 */
299int spmi_command_sleep(struct spmi_device *sdev)
300{
301 return spmi_cmd(sdev->ctrl, SPMI_CMD_SLEEP, sdev->usid);
302}
303EXPORT_SYMBOL_GPL(spmi_command_sleep);
304
305/**
306 * spmi_command_wakeup() - sends WAKEUP command to the specified SPMI device
307 * @sdev: SPMI device.
308 *
309 * The Wakeup command causes the Slave to move from the SLEEP state to
310 * the ACTIVE state.
311 */
312int spmi_command_wakeup(struct spmi_device *sdev)
313{
314 return spmi_cmd(sdev->ctrl, SPMI_CMD_WAKEUP, sdev->usid);
315}
316EXPORT_SYMBOL_GPL(spmi_command_wakeup);
317
318/**
319 * spmi_command_shutdown() - sends SHUTDOWN command to the specified SPMI device
320 * @sdev: SPMI device.
321 *
322 * The Shutdown command causes the Slave to enter the SHUTDOWN state.
323 */
324int spmi_command_shutdown(struct spmi_device *sdev)
325{
326 return spmi_cmd(sdev->ctrl, SPMI_CMD_SHUTDOWN, sdev->usid);
327}
328EXPORT_SYMBOL_GPL(spmi_command_shutdown);
329
330static int spmi_drv_probe(struct device *dev)
331{
332 const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
333 struct spmi_device *sdev = to_spmi_device(dev);
334 int err;
335
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600336 pm_runtime_get_noresume(dev);
337 pm_runtime_set_active(dev);
338 pm_runtime_enable(dev);
339
340 err = sdrv->probe(sdev);
341 if (err)
342 goto fail_probe;
343
344 return 0;
345
346fail_probe:
347 pm_runtime_disable(dev);
348 pm_runtime_set_suspended(dev);
349 pm_runtime_put_noidle(dev);
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600350 return err;
351}
352
353static int spmi_drv_remove(struct device *dev)
354{
355 const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
356
357 pm_runtime_get_sync(dev);
358 sdrv->remove(to_spmi_device(dev));
359 pm_runtime_put_noidle(dev);
360
361 pm_runtime_disable(dev);
362 pm_runtime_set_suspended(dev);
363 pm_runtime_put_noidle(dev);
364 return 0;
365}
366
367static struct bus_type spmi_bus_type = {
368 .name = "spmi",
369 .match = spmi_device_match,
Kenneth Heitke5a86bf32014-02-12 13:44:22 -0600370 .probe = spmi_drv_probe,
371 .remove = spmi_drv_remove,
372};
373
374/**
375 * spmi_controller_alloc() - Allocate a new SPMI device
376 * @ctrl: associated controller
377 *
378 * Caller is responsible for either calling spmi_device_add() to add the
379 * newly allocated controller, or calling spmi_device_put() to discard it.
380 */
381struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl)
382{
383 struct spmi_device *sdev;
384
385 sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
386 if (!sdev)
387 return NULL;
388
389 sdev->ctrl = ctrl;
390 device_initialize(&sdev->dev);
391 sdev->dev.parent = &ctrl->dev;
392 sdev->dev.bus = &spmi_bus_type;
393 sdev->dev.type = &spmi_dev_type;
394 return sdev;
395}
396EXPORT_SYMBOL_GPL(spmi_device_alloc);
397
398/**
399 * spmi_controller_alloc() - Allocate a new SPMI controller
400 * @parent: parent device
401 * @size: size of private data
402 *
403 * Caller is responsible for either calling spmi_controller_add() to add the
404 * newly allocated controller, or calling spmi_controller_put() to discard it.
405 * The allocated private data region may be accessed via
406 * spmi_controller_get_drvdata()
407 */
408struct spmi_controller *spmi_controller_alloc(struct device *parent,
409 size_t size)
410{
411 struct spmi_controller *ctrl;
412 int id;
413
414 if (WARN_ON(!parent))
415 return NULL;
416
417 ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL);
418 if (!ctrl)
419 return NULL;
420
421 device_initialize(&ctrl->dev);
422 ctrl->dev.type = &spmi_ctrl_type;
423 ctrl->dev.bus = &spmi_bus_type;
424 ctrl->dev.parent = parent;
425 ctrl->dev.of_node = parent->of_node;
426 spmi_controller_set_drvdata(ctrl, &ctrl[1]);
427
428 id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
429 if (id < 0) {
430 dev_err(parent,
431 "unable to allocate SPMI controller identifier.\n");
432 spmi_controller_put(ctrl);
433 return NULL;
434 }
435
436 ctrl->nr = id;
437 dev_set_name(&ctrl->dev, "spmi-%d", id);
438
439 dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
440 return ctrl;
441}
442EXPORT_SYMBOL_GPL(spmi_controller_alloc);
443
444static void of_spmi_register_devices(struct spmi_controller *ctrl)
445{
446 struct device_node *node;
447 int err;
448
449 if (!ctrl->dev.of_node)
450 return;
451
452 for_each_available_child_of_node(ctrl->dev.of_node, node) {
453 struct spmi_device *sdev;
454 u32 reg[2];
455
456 dev_dbg(&ctrl->dev, "adding child %s\n", node->full_name);
457
458 err = of_property_read_u32_array(node, "reg", reg, 2);
459 if (err) {
460 dev_err(&ctrl->dev,
461 "node %s err (%d) does not have 'reg' property\n",
462 node->full_name, err);
463 continue;
464 }
465
466 if (reg[1] != SPMI_USID) {
467 dev_err(&ctrl->dev,
468 "node %s contains unsupported 'reg' entry\n",
469 node->full_name);
470 continue;
471 }
472
473 if (reg[0] >= SPMI_MAX_SLAVE_ID) {
474 dev_err(&ctrl->dev,
475 "invalid usid on node %s\n",
476 node->full_name);
477 continue;
478 }
479
480 dev_dbg(&ctrl->dev, "read usid %02x\n", reg[0]);
481
482 sdev = spmi_device_alloc(ctrl);
483 if (!sdev)
484 continue;
485
486 sdev->dev.of_node = node;
487 sdev->usid = (u8) reg[0];
488
489 err = spmi_device_add(sdev);
490 if (err) {
491 dev_err(&sdev->dev,
492 "failure adding device. status %d\n", err);
493 spmi_device_put(sdev);
494 }
495 }
496}
497
498/**
499 * spmi_controller_add() - Add an SPMI controller
500 * @ctrl: controller to be registered.
501 *
502 * Register a controller previously allocated via spmi_controller_alloc() with
503 * the SPMI core.
504 */
505int spmi_controller_add(struct spmi_controller *ctrl)
506{
507 int ret;
508
509 /* Can't register until after driver model init */
510 if (WARN_ON(!spmi_bus_type.p))
511 return -EAGAIN;
512
513 ret = device_add(&ctrl->dev);
514 if (ret)
515 return ret;
516
517 if (IS_ENABLED(CONFIG_OF))
518 of_spmi_register_devices(ctrl);
519
520 dev_dbg(&ctrl->dev, "spmi-%d registered: dev:%p\n",
521 ctrl->nr, &ctrl->dev);
522
523 return 0;
524};
525EXPORT_SYMBOL_GPL(spmi_controller_add);
526
527/* Remove a device associated with a controller */
528static int spmi_ctrl_remove_device(struct device *dev, void *data)
529{
530 struct spmi_device *spmidev = to_spmi_device(dev);
531 if (dev->type == &spmi_dev_type)
532 spmi_device_remove(spmidev);
533 return 0;
534}
535
536/**
537 * spmi_controller_remove(): remove an SPMI controller
538 * @ctrl: controller to remove
539 *
540 * Remove a SPMI controller. Caller is responsible for calling
541 * spmi_controller_put() to discard the allocated controller.
542 */
543void spmi_controller_remove(struct spmi_controller *ctrl)
544{
545 int dummy;
546
547 if (!ctrl)
548 return;
549
550 dummy = device_for_each_child(&ctrl->dev, NULL,
551 spmi_ctrl_remove_device);
552 device_del(&ctrl->dev);
553}
554EXPORT_SYMBOL_GPL(spmi_controller_remove);
555
556/**
557 * spmi_driver_register() - Register client driver with SPMI core
558 * @sdrv: client driver to be associated with client-device.
559 *
560 * This API will register the client driver with the SPMI framework.
561 * It is typically called from the driver's module-init function.
562 */
563int spmi_driver_register(struct spmi_driver *sdrv)
564{
565 sdrv->driver.bus = &spmi_bus_type;
566 return driver_register(&sdrv->driver);
567}
568EXPORT_SYMBOL_GPL(spmi_driver_register);
569
570static void __exit spmi_exit(void)
571{
572 bus_unregister(&spmi_bus_type);
573}
574module_exit(spmi_exit);
575
576static int __init spmi_init(void)
577{
578 return bus_register(&spmi_bus_type);
579}
580postcore_initcall(spmi_init);
581
582MODULE_LICENSE("GPL v2");
583MODULE_DESCRIPTION("SPMI module");
584MODULE_ALIAS("platform:spmi");