blob: ebe0c17039cf0f8dec6d6207da29052463a610d3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef _LINUX_PTRACE_H
2#define _LINUX_PTRACE_H
3/* ptrace.h */
4/* structs and defines to help the user use the ptrace system call. */
5
6/* has the defines to get at the registers. */
7
8#define PTRACE_TRACEME 0
9#define PTRACE_PEEKTEXT 1
10#define PTRACE_PEEKDATA 2
11#define PTRACE_PEEKUSR 3
12#define PTRACE_POKETEXT 4
13#define PTRACE_POKEDATA 5
14#define PTRACE_POKEUSR 6
15#define PTRACE_CONT 7
16#define PTRACE_KILL 8
17#define PTRACE_SINGLESTEP 9
18
Roland McGrath416bc512006-09-29 02:00:45 -070019#define PTRACE_ATTACH 16
20#define PTRACE_DETACH 17
Linus Torvalds1da177e2005-04-16 15:20:36 -070021
22#define PTRACE_SYSCALL 24
Linus Torvalds1da177e2005-04-16 15:20:36 -070023
24/* 0x4200-0x4300 are reserved for architecture-independent additions. */
25#define PTRACE_SETOPTIONS 0x4200
26#define PTRACE_GETEVENTMSG 0x4201
27#define PTRACE_GETSIGINFO 0x4202
28#define PTRACE_SETSIGINFO 0x4203
29
30/* options set using PTRACE_SETOPTIONS */
31#define PTRACE_O_TRACESYSGOOD 0x00000001
32#define PTRACE_O_TRACEFORK 0x00000002
33#define PTRACE_O_TRACEVFORK 0x00000004
34#define PTRACE_O_TRACECLONE 0x00000008
35#define PTRACE_O_TRACEEXEC 0x00000010
36#define PTRACE_O_TRACEVFORKDONE 0x00000020
37#define PTRACE_O_TRACEEXIT 0x00000040
38
39#define PTRACE_O_MASK 0x0000007f
40
41/* Wait extended result codes for the above trace options. */
42#define PTRACE_EVENT_FORK 1
43#define PTRACE_EVENT_VFORK 2
44#define PTRACE_EVENT_CLONE 3
45#define PTRACE_EVENT_EXEC 4
46#define PTRACE_EVENT_VFORK_DONE 5
47#define PTRACE_EVENT_EXIT 6
48
49#include <asm/ptrace.h>
50
51#ifdef __KERNEL__
52/*
53 * Ptrace flags
Eric W. Biederman260ea102006-06-23 02:05:18 -070054 *
55 * The owner ship rules for task->ptrace which holds the ptrace
56 * flags is simple. When a task is running it owns it's task->ptrace
57 * flags. When the a task is stopped the ptracer owns task->ptrace.
Linus Torvalds1da177e2005-04-16 15:20:36 -070058 */
59
60#define PT_PTRACED 0x00000001
61#define PT_DTRACE 0x00000002 /* delayed trace (used on m68k, i386) */
62#define PT_TRACESYSGOOD 0x00000004
63#define PT_PTRACE_CAP 0x00000008 /* ptracer can follow suid-exec */
64#define PT_TRACE_FORK 0x00000010
65#define PT_TRACE_VFORK 0x00000020
66#define PT_TRACE_CLONE 0x00000040
67#define PT_TRACE_EXEC 0x00000080
68#define PT_TRACE_VFORK_DONE 0x00000100
69#define PT_TRACE_EXIT 0x00000200
Linus Torvalds1da177e2005-04-16 15:20:36 -070070
71#define PT_TRACE_MASK 0x000003f4
72
73/* single stepping state bits (used on ARM and PA-RISC) */
74#define PT_SINGLESTEP_BIT 31
75#define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT)
76#define PT_BLOCKSTEP_BIT 30
77#define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT)
78
79#include <linux/compiler.h> /* For unlikely. */
80#include <linux/sched.h> /* For struct task_struct. */
81
Christoph Hellwig481bed42005-11-07 00:59:47 -080082
83extern long arch_ptrace(struct task_struct *child, long request, long addr, long data);
Christoph Hellwig6b9c7ed2006-01-08 01:02:33 -080084extern struct task_struct *ptrace_get_task_struct(pid_t pid);
85extern int ptrace_traceme(void);
Linus Torvalds1da177e2005-04-16 15:20:36 -070086extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
87extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
88extern int ptrace_attach(struct task_struct *tsk);
89extern int ptrace_detach(struct task_struct *, unsigned int);
90extern void ptrace_disable(struct task_struct *);
91extern int ptrace_check_attach(struct task_struct *task, int kill);
92extern int ptrace_request(struct task_struct *child, long request, long addr, long data);
93extern void ptrace_notify(int exit_code);
94extern void __ptrace_link(struct task_struct *child,
95 struct task_struct *new_parent);
96extern void __ptrace_unlink(struct task_struct *child);
97extern void ptrace_untrace(struct task_struct *child);
Miklos Szerediab8d11b2005-09-06 15:18:24 -070098extern int ptrace_may_attach(struct task_struct *task);
Al Viro831830b2008-01-02 14:09:57 +000099extern int __ptrace_may_attach(struct task_struct *task);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100
101static inline void ptrace_link(struct task_struct *child,
102 struct task_struct *new_parent)
103{
104 if (unlikely(child->ptrace))
105 __ptrace_link(child, new_parent);
106}
107static inline void ptrace_unlink(struct task_struct *child)
108{
109 if (unlikely(child->ptrace))
110 __ptrace_unlink(child);
111}
112
Alexey Dobriyan76647322007-07-17 04:03:43 -0700113int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data);
Alexey Dobriyanf284ce72007-07-17 04:03:44 -0700114int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115
116#ifndef force_successful_syscall_return
117/*
118 * System call handlers that, upon successful completion, need to return a
119 * negative value should call force_successful_syscall_return() right before
120 * returning. On architectures where the syscall convention provides for a
121 * separate error flag (e.g., alpha, ia64, ppc{,64}, sparc{,64}, possibly
122 * others), this macro can be used to ensure that the error flag will not get
123 * set. On architectures which do not support a separate error flag, the macro
124 * is a no-op and the spurious error condition needs to be filtered out by some
125 * other means (e.g., in user-level, by passing an extra argument to the
126 * syscall handler, or something along those lines).
127 */
128#define force_successful_syscall_return() do { } while (0)
129#endif
130
Roland McGrathfb7fa8f2008-01-30 13:30:47 +0100131/*
132 * <asm/ptrace.h> should define the following things inside #ifdef __KERNEL__.
133 *
134 * These do-nothing inlines are used when the arch does not
135 * implement single-step. The kerneldoc comments are here
136 * to document the interface for all arch definitions.
137 */
138
139#ifndef arch_has_single_step
140/**
141 * arch_has_single_step - does this CPU support user-mode single-step?
142 *
143 * If this is defined, then there must be function declarations or
144 * inlines for user_enable_single_step() and user_disable_single_step().
145 * arch_has_single_step() should evaluate to nonzero iff the machine
146 * supports instruction single-step for user mode.
147 * It can be a constant or it can test a CPU feature bit.
148 */
149#define arch_has_single_step() (0)
150
151/**
152 * user_enable_single_step - single-step in user-mode task
153 * @task: either current or a task stopped in %TASK_TRACED
154 *
155 * This can only be called when arch_has_single_step() has returned nonzero.
156 * Set @task so that when it returns to user mode, it will trap after the
Roland McGrathdc802c22008-01-30 13:30:53 +0100157 * next single instruction executes. If arch_has_block_step() is defined,
158 * this must clear the effects of user_enable_block_step() too.
Roland McGrathfb7fa8f2008-01-30 13:30:47 +0100159 */
160static inline void user_enable_single_step(struct task_struct *task)
161{
162 BUG(); /* This can never be called. */
163}
164
165/**
166 * user_disable_single_step - cancel user-mode single-step
167 * @task: either current or a task stopped in %TASK_TRACED
168 *
Roland McGrathdc802c22008-01-30 13:30:53 +0100169 * Clear @task of the effects of user_enable_single_step() and
170 * user_enable_block_step(). This can be called whether or not either
171 * of those was ever called on @task, and even if arch_has_single_step()
172 * returned zero.
Roland McGrathfb7fa8f2008-01-30 13:30:47 +0100173 */
174static inline void user_disable_single_step(struct task_struct *task)
175{
176}
177#endif /* arch_has_single_step */
178
Roland McGrathdc802c22008-01-30 13:30:53 +0100179#ifndef arch_has_block_step
180/**
181 * arch_has_block_step - does this CPU support user-mode block-step?
182 *
183 * If this is defined, then there must be a function declaration or inline
184 * for user_enable_block_step(), and arch_has_single_step() must be defined
185 * too. arch_has_block_step() should evaluate to nonzero iff the machine
186 * supports step-until-branch for user mode. It can be a constant or it
187 * can test a CPU feature bit.
188 */
Roland McGrath5b88abb2008-01-30 13:30:53 +0100189#define arch_has_block_step() (0)
Roland McGrathdc802c22008-01-30 13:30:53 +0100190
191/**
192 * user_enable_block_step - step until branch in user-mode task
193 * @task: either current or a task stopped in %TASK_TRACED
194 *
195 * This can only be called when arch_has_block_step() has returned nonzero,
196 * and will never be called when single-instruction stepping is being used.
197 * Set @task so that when it returns to user mode, it will trap after the
198 * next branch or trap taken.
199 */
200static inline void user_enable_block_step(struct task_struct *task)
201{
202 BUG(); /* This can never be called. */
203}
204#endif /* arch_has_block_step */
205
Roland McGrath1a669c22008-02-06 01:37:37 -0800206#ifndef arch_ptrace_stop_needed
207/**
208 * arch_ptrace_stop_needed - Decide whether arch_ptrace_stop() should be called
209 * @code: current->exit_code value ptrace will stop with
210 * @info: siginfo_t pointer (or %NULL) for signal ptrace will stop with
211 *
212 * This is called with the siglock held, to decide whether or not it's
213 * necessary to release the siglock and call arch_ptrace_stop() with the
214 * same @code and @info arguments. It can be defined to a constant if
215 * arch_ptrace_stop() is never required, or always is. On machines where
216 * this makes sense, it should be defined to a quick test to optimize out
217 * calling arch_ptrace_stop() when it would be superfluous. For example,
218 * if the thread has not been back to user mode since the last stop, the
219 * thread state might indicate that nothing needs to be done.
220 */
221#define arch_ptrace_stop_needed(code, info) (0)
222#endif
223
224#ifndef arch_ptrace_stop
225/**
226 * arch_ptrace_stop - Do machine-specific work before stopping for ptrace
227 * @code: current->exit_code value ptrace will stop with
228 * @info: siginfo_t pointer (or %NULL) for signal ptrace will stop with
229 *
230 * This is called with no locks held when arch_ptrace_stop_needed() has
231 * just returned nonzero. It is allowed to block, e.g. for user memory
232 * access. The arch can have machine-specific work to be done before
233 * ptrace stops. On ia64, register backing store gets written back to user
234 * memory here. Since this can be costly (requires dropping the siglock),
235 * we only do it when the arch requires it for this particular stop, as
236 * indicated by arch_ptrace_stop_needed().
237 */
238#define arch_ptrace_stop(code, info) do { } while (0)
239#endif
240
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241#endif
242
243#endif