Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * This file is subject to the terms and conditions of the GNU General Public |
| 3 | * License. See the file "COPYING" in the main directory of this archive |
| 4 | * for more details. |
| 5 | * |
| 6 | * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle |
| 7 | */ |
| 8 | #ifndef __ASM_JAZZ_H |
| 9 | #define __ASM_JAZZ_H |
| 10 | |
| 11 | /* |
| 12 | * The addresses below are virtual address. The mappings are |
| 13 | * created on startup via wired entries in the tlb. The Mips |
| 14 | * Magnum R3000 and R4000 machines are similar in many aspects, |
| 15 | * but many hardware register are accessible at 0xb9000000 in |
| 16 | * instead of 0xe0000000. |
| 17 | */ |
| 18 | |
| 19 | #define JAZZ_LOCAL_IO_SPACE 0xe0000000 |
| 20 | |
| 21 | /* |
| 22 | * Revision numbers in PICA_ASIC_REVISION |
| 23 | * |
| 24 | * 0xf0000000 - Rev1 |
| 25 | * 0xf0000001 - Rev2 |
| 26 | * 0xf0000002 - Rev3 |
| 27 | */ |
| 28 | #define PICA_ASIC_REVISION 0xe0000008 |
| 29 | |
| 30 | /* |
| 31 | * The segments of the seven segment LED are mapped |
| 32 | * to the control bits as follows: |
| 33 | * |
| 34 | * (7) |
| 35 | * --------- |
| 36 | * | | |
| 37 | * (2) | | (6) |
| 38 | * | (1) | |
| 39 | * --------- |
| 40 | * | | |
| 41 | * (3) | | (5) |
| 42 | * | (4) | |
| 43 | * --------- . (0) |
| 44 | */ |
| 45 | #define PICA_LED 0xe000f000 |
| 46 | |
| 47 | /* |
| 48 | * Some characters for the LED control registers |
| 49 | * The original Mips machines seem to have a LED display |
| 50 | * with integrated decoder while the Acer machines can |
| 51 | * control each of the seven segments and the dot independently. |
| 52 | * It's only a toy, anyway... |
| 53 | */ |
| 54 | #define LED_DOT 0x01 |
| 55 | #define LED_SPACE 0x00 |
| 56 | #define LED_0 0xfc |
| 57 | #define LED_1 0x60 |
| 58 | #define LED_2 0xda |
| 59 | #define LED_3 0xf2 |
| 60 | #define LED_4 0x66 |
| 61 | #define LED_5 0xb6 |
| 62 | #define LED_6 0xbe |
| 63 | #define LED_7 0xe0 |
| 64 | #define LED_8 0xfe |
| 65 | #define LED_9 0xf6 |
| 66 | #define LED_A 0xee |
| 67 | #define LED_b 0x3e |
| 68 | #define LED_C 0x9c |
| 69 | #define LED_d 0x7a |
| 70 | #define LED_E 0x9e |
| 71 | #define LED_F 0x8e |
| 72 | |
| 73 | #ifndef __ASSEMBLY__ |
| 74 | |
| 75 | static __inline__ void pica_set_led(unsigned int bits) |
| 76 | { |
| 77 | volatile unsigned int *led_register = (unsigned int *) PICA_LED; |
| 78 | |
| 79 | *led_register = bits; |
| 80 | } |
| 81 | |
| 82 | #endif /* !__ASSEMBLY__ */ |
| 83 | |
| 84 | /* |
| 85 | * Base address of the Sonic Ethernet adapter in Jazz machines. |
| 86 | */ |
| 87 | #define JAZZ_ETHERNET_BASE 0xe0001000 |
| 88 | |
| 89 | /* |
| 90 | * Base address of the 53C94 SCSI hostadapter in Jazz machines. |
| 91 | */ |
| 92 | #define JAZZ_SCSI_BASE 0xe0002000 |
| 93 | |
| 94 | /* |
| 95 | * i8042 keyboard controller for JAZZ and PICA chipsets. |
| 96 | * This address is just a guess and seems to differ from |
| 97 | * other mips machines such as RC3xxx... |
| 98 | */ |
| 99 | #define JAZZ_KEYBOARD_ADDRESS 0xe0005000 |
| 100 | #define JAZZ_KEYBOARD_DATA 0xe0005000 |
| 101 | #define JAZZ_KEYBOARD_COMMAND 0xe0005001 |
| 102 | |
| 103 | #ifndef __ASSEMBLY__ |
| 104 | |
| 105 | typedef struct { |
| 106 | unsigned char data; |
| 107 | unsigned char command; |
| 108 | } jazz_keyboard_hardware; |
| 109 | |
| 110 | #define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS) |
| 111 | |
| 112 | typedef struct { |
| 113 | unsigned char pad0[3]; |
| 114 | unsigned char data; |
| 115 | unsigned char pad1[3]; |
| 116 | unsigned char command; |
| 117 | } mips_keyboard_hardware; |
| 118 | |
| 119 | /* |
| 120 | * For now. Needs to be changed for RC3xxx support. See below. |
| 121 | */ |
| 122 | #define keyboard_hardware jazz_keyboard_hardware |
| 123 | |
| 124 | #endif /* !__ASSEMBLY__ */ |
| 125 | |
| 126 | /* |
| 127 | * i8042 keyboard controller for most other Mips machines. |
| 128 | */ |
| 129 | #define MIPS_KEYBOARD_ADDRESS 0xb9005000 |
| 130 | #define MIPS_KEYBOARD_DATA 0xb9005003 |
| 131 | #define MIPS_KEYBOARD_COMMAND 0xb9005007 |
| 132 | |
| 133 | /* |
| 134 | * Serial and parallel ports (WD 16C552) on the Mips JAZZ |
| 135 | */ |
| 136 | #define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 |
| 137 | #define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 |
| 138 | #define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 |
| 139 | |
| 140 | /* |
| 141 | * Dummy Device Address. Used in jazzdma.c |
| 142 | */ |
| 143 | #define JAZZ_DUMMY_DEVICE 0xe000d000 |
| 144 | |
| 145 | /* |
| 146 | * JAZZ timer registers and interrupt no. |
| 147 | * Note that the hardware timer interrupt is actually on |
| 148 | * cpu level 6, but to keep compatibility with PC stuff |
| 149 | * it is remapped to vector 0. See arch/mips/kernel/entry.S. |
| 150 | */ |
| 151 | #define JAZZ_TIMER_INTERVAL 0xe0000228 |
| 152 | #define JAZZ_TIMER_REGISTER 0xe0000230 |
| 153 | |
| 154 | /* |
| 155 | * DRAM configuration register |
| 156 | */ |
| 157 | #ifndef __ASSEMBLY__ |
| 158 | #ifdef __MIPSEL__ |
| 159 | typedef struct { |
| 160 | unsigned int bank2 : 3; |
| 161 | unsigned int bank1 : 3; |
| 162 | unsigned int mem_bus_width : 1; |
| 163 | unsigned int reserved2 : 1; |
| 164 | unsigned int page_mode : 1; |
| 165 | unsigned int reserved1 : 23; |
| 166 | } dram_configuration; |
| 167 | #else /* defined (__MIPSEB__) */ |
| 168 | typedef struct { |
| 169 | unsigned int reserved1 : 23; |
| 170 | unsigned int page_mode : 1; |
| 171 | unsigned int reserved2 : 1; |
| 172 | unsigned int mem_bus_width : 1; |
| 173 | unsigned int bank1 : 3; |
| 174 | unsigned int bank2 : 3; |
| 175 | } dram_configuration; |
| 176 | #endif |
| 177 | #endif /* !__ASSEMBLY__ */ |
| 178 | |
| 179 | #define PICA_DRAM_CONFIG 0xe00fffe0 |
| 180 | |
| 181 | /* |
| 182 | * JAZZ interrupt control registers |
| 183 | */ |
| 184 | #define JAZZ_IO_IRQ_SOURCE 0xe0010000 |
| 185 | #define JAZZ_IO_IRQ_ENABLE 0xe0010002 |
| 186 | |
| 187 | /* |
| 188 | * JAZZ interrupt enable bits |
| 189 | */ |
| 190 | #define JAZZ_IE_PARALLEL (1 << 0) |
| 191 | #define JAZZ_IE_FLOPPY (1 << 1) |
| 192 | #define JAZZ_IE_SOUND (1 << 2) |
| 193 | #define JAZZ_IE_VIDEO (1 << 3) |
| 194 | #define JAZZ_IE_ETHERNET (1 << 4) |
| 195 | #define JAZZ_IE_SCSI (1 << 5) |
| 196 | #define JAZZ_IE_KEYBOARD (1 << 6) |
| 197 | #define JAZZ_IE_MOUSE (1 << 7) |
| 198 | #define JAZZ_IE_SERIAL1 (1 << 8) |
| 199 | #define JAZZ_IE_SERIAL2 (1 << 9) |
| 200 | |
| 201 | /* |
| 202 | * JAZZ Interrupt Level definitions |
| 203 | * |
| 204 | * This is somewhat broken. For reasons which nobody can remember anymore |
| 205 | * we remap the Jazz interrupts to the usual ISA style interrupt numbers. |
| 206 | */ |
| 207 | #define JAZZ_PARALLEL_IRQ 16 |
| 208 | #define JAZZ_FLOPPY_IRQ 17 |
| 209 | #define JAZZ_SOUND_IRQ 18 |
| 210 | #define JAZZ_VIDEO_IRQ 19 |
| 211 | #define JAZZ_ETHERNET_IRQ 20 |
| 212 | #define JAZZ_SCSI_IRQ 21 |
| 213 | #define JAZZ_KEYBOARD_IRQ 22 |
| 214 | #define JAZZ_MOUSE_IRQ 23 |
| 215 | #define JAZZ_SERIAL1_IRQ 24 |
| 216 | #define JAZZ_SERIAL2_IRQ 25 |
| 217 | |
| 218 | #define JAZZ_TIMER_IRQ 31 |
| 219 | |
| 220 | |
| 221 | /* |
| 222 | * JAZZ DMA Channels |
| 223 | * Note: Channels 4...7 are not used with respect to the Acer PICA-61 |
| 224 | * chipset which does not provide these DMA channels. |
| 225 | */ |
| 226 | #define JAZZ_SCSI_DMA 0 /* SCSI */ |
| 227 | #define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ |
| 228 | #define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ |
| 229 | #define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ |
| 230 | |
| 231 | /* |
| 232 | * JAZZ R4030 MCT_ADR chip (DMA controller) |
| 233 | * Note: Virtual Addresses ! |
| 234 | */ |
| 235 | #define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ |
| 236 | #define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ |
| 237 | #define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ |
| 238 | |
| 239 | #define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ |
| 240 | #define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ |
| 241 | #define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ |
| 242 | |
| 243 | #define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ |
| 244 | #define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ |
| 245 | #define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ |
| 246 | |
| 247 | #define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ |
| 248 | #define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ |
| 249 | #define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ |
| 250 | #define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ |
| 251 | |
| 252 | /* |
| 253 | * Remote Speed Registers. |
| 254 | * |
| 255 | * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, |
| 256 | * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, |
| 257 | * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, |
| 258 | * 12: reserved, 13: free, 14: 7seg LED, 15: ??? |
| 259 | */ |
| 260 | #define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ |
| 261 | /* 0xE0000070,78,80... 0xE00000E8 */ |
| 262 | #define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ |
| 263 | #define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ |
| 264 | #define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ |
| 265 | #define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ |
| 266 | |
| 267 | /* |
| 268 | * Virtual (E)ISA controller address |
| 269 | */ |
| 270 | #define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */ |
| 271 | |
| 272 | /* |
| 273 | * Access the R4030 DMA and I/O Controller |
| 274 | */ |
| 275 | #ifndef __ASSEMBLY__ |
| 276 | |
| 277 | static inline void r4030_delay(void) |
| 278 | { |
| 279 | __asm__ __volatile__( |
| 280 | ".set\tnoreorder\n\t" |
| 281 | "nop\n\t" |
| 282 | "nop\n\t" |
| 283 | "nop\n\t" |
| 284 | "nop\n\t" |
| 285 | ".set\treorder"); |
| 286 | } |
| 287 | |
| 288 | static inline unsigned short r4030_read_reg16(unsigned long addr) |
| 289 | { |
| 290 | unsigned short ret = *((volatile unsigned short *)addr); |
| 291 | r4030_delay(); |
| 292 | return ret; |
| 293 | } |
| 294 | |
| 295 | static inline unsigned int r4030_read_reg32(unsigned long addr) |
| 296 | { |
| 297 | unsigned int ret = *((volatile unsigned int *)addr); |
| 298 | r4030_delay(); |
| 299 | return ret; |
| 300 | } |
| 301 | |
| 302 | static inline void r4030_write_reg16(unsigned long addr, unsigned val) |
| 303 | { |
| 304 | *((volatile unsigned short *)addr) = val; |
| 305 | r4030_delay(); |
| 306 | } |
| 307 | |
| 308 | static inline void r4030_write_reg32(unsigned long addr, unsigned val) |
| 309 | { |
| 310 | *((volatile unsigned int *)addr) = val; |
| 311 | r4030_delay(); |
| 312 | } |
| 313 | |
| 314 | #endif /* !__ASSEMBLY__ */ |
| 315 | |
| 316 | #define JAZZ_FDC_BASE 0xe0003000 |
| 317 | #define JAZZ_RTC_BASE 0xe0004000 |
| 318 | #define JAZZ_PORT_BASE 0xe2000000 |
| 319 | |
| 320 | #define JAZZ_EISA_BASE 0xe3000000 |
| 321 | |
| 322 | #endif /* __ASM_JAZZ_H */ |