blob: 905d1f51a7bfd7db75f90b9de128f13fd5142ac8 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/synclink.c
3 *
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08004 * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
Linus Torvalds1da177e2005-04-16 15:20:36 -07005 *
6 * Device driver for Microgate SyncLink ISA and PCI
7 * high speed multiprotocol serial adapters.
8 *
9 * written by Paul Fulghum for Microgate Corporation
10 * paulkf@microgate.com
11 *
12 * Microgate and SyncLink are trademarks of Microgate Corporation
13 *
14 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
15 *
16 * Original release 01/11/99
17 *
18 * This code is released under the GNU General Public License (GPL)
19 *
20 * This driver is primarily intended for use in synchronous
21 * HDLC mode. Asynchronous mode is also provided.
22 *
23 * When operating in synchronous mode, each call to mgsl_write()
24 * contains exactly one complete HDLC frame. Calling mgsl_put_char
25 * will start assembling an HDLC frame that will not be sent until
26 * mgsl_flush_chars or mgsl_write is called.
27 *
28 * Synchronous receive data is reported as complete frames. To accomplish
29 * this, the TTY flip buffer is bypassed (too small to hold largest
30 * frame and may fragment frames) and the line discipline
31 * receive entry point is called directly.
32 *
33 * This driver has been tested with a slightly modified ppp.c driver
34 * for synchronous PPP.
35 *
36 * 2000/02/16
37 * Added interface for syncppp.c driver (an alternate synchronous PPP
38 * implementation that also supports Cisco HDLC). Each device instance
39 * registers as a tty device AND a network device (if dosyncppp option
40 * is set for the device). The functionality is determined by which
41 * device interface is opened.
42 *
43 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
44 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
45 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
46 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
47 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
48 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
49 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
50 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
51 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
52 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
53 * OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56#if defined(__i386__)
57# define BREAKPOINT() asm(" int $3");
58#else
59# define BREAKPOINT() { }
60#endif
61
62#define MAX_ISA_DEVICES 10
63#define MAX_PCI_DEVICES 10
64#define MAX_TOTAL_DEVICES 20
65
Linus Torvalds1da177e2005-04-16 15:20:36 -070066#include <linux/module.h>
67#include <linux/errno.h>
68#include <linux/signal.h>
69#include <linux/sched.h>
70#include <linux/timer.h>
71#include <linux/interrupt.h>
72#include <linux/pci.h>
73#include <linux/tty.h>
74#include <linux/tty_flip.h>
75#include <linux/serial.h>
76#include <linux/major.h>
77#include <linux/string.h>
78#include <linux/fcntl.h>
79#include <linux/ptrace.h>
80#include <linux/ioport.h>
81#include <linux/mm.h>
82#include <linux/slab.h>
83#include <linux/delay.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070084#include <linux/netdevice.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070085#include <linux/vmalloc.h>
86#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070087#include <linux/ioctl.h>
88
89#include <asm/system.h>
90#include <asm/io.h>
91#include <asm/irq.h>
92#include <asm/dma.h>
93#include <linux/bitops.h>
94#include <asm/types.h>
95#include <linux/termios.h>
96#include <linux/workqueue.h>
97#include <linux/hdlc.h>
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -080098#include <linux/dma-mapping.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070099
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800100#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
101#define SYNCLINK_GENERIC_HDLC 1
102#else
103#define SYNCLINK_GENERIC_HDLC 0
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104#endif
105
106#define GET_USER(error,value,addr) error = get_user(value,addr)
107#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
108#define PUT_USER(error,value,addr) error = put_user(value,addr)
109#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
110
111#include <asm/uaccess.h>
112
113#include "linux/synclink.h"
114
115#define RCLRVALUE 0xffff
116
117static MGSL_PARAMS default_params = {
118 MGSL_MODE_HDLC, /* unsigned long mode */
119 0, /* unsigned char loopback; */
120 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
121 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
122 0, /* unsigned long clock_speed; */
123 0xff, /* unsigned char addr_filter; */
124 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
125 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
126 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
127 9600, /* unsigned long data_rate; */
128 8, /* unsigned char data_bits; */
129 1, /* unsigned char stop_bits; */
130 ASYNC_PARITY_NONE /* unsigned char parity; */
131};
132
133#define SHARED_MEM_ADDRESS_SIZE 0x40000
Paul Fulghum623a4392006-10-17 00:09:27 -0700134#define BUFFERLISTSIZE 4096
135#define DMABUFFERSIZE 4096
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136#define MAXRXFRAMES 7
137
138typedef struct _DMABUFFERENTRY
139{
140 u32 phys_addr; /* 32-bit flat physical address of data buffer */
Paul Fulghum4a918bc2005-09-09 13:02:12 -0700141 volatile u16 count; /* buffer size/data count */
142 volatile u16 status; /* Control/status field */
143 volatile u16 rcc; /* character count field */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144 u16 reserved; /* padding required by 16C32 */
145 u32 link; /* 32-bit flat link to next buffer entry */
146 char *virt_addr; /* virtual address of data buffer */
147 u32 phys_entry; /* physical address of this buffer entry */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800148 dma_addr_t dma_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700149} DMABUFFERENTRY, *DMAPBUFFERENTRY;
150
151/* The queue of BH actions to be performed */
152
153#define BH_RECEIVE 1
154#define BH_TRANSMIT 2
155#define BH_STATUS 4
156
157#define IO_PIN_SHUTDOWN_LIMIT 100
158
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159struct _input_signal_events {
160 int ri_up;
161 int ri_down;
162 int dsr_up;
163 int dsr_down;
164 int dcd_up;
165 int dcd_down;
166 int cts_up;
167 int cts_down;
168};
169
170/* transmit holding buffer definitions*/
171#define MAX_TX_HOLDING_BUFFERS 5
172struct tx_holding_buffer {
173 int buffer_size;
174 unsigned char * buffer;
175};
176
177
178/*
179 * Device instance data structure
180 */
181
182struct mgsl_struct {
183 int magic;
184 int flags;
185 int count; /* count of opens */
186 int line;
187 int hw_version;
188 unsigned short close_delay;
189 unsigned short closing_wait; /* time to wait before closing */
190
191 struct mgsl_icount icount;
192
193 struct tty_struct *tty;
194 int timeout;
195 int x_char; /* xon/xoff character */
196 int blocked_open; /* # of blocked opens */
197 u16 read_status_mask;
198 u16 ignore_status_mask;
199 unsigned char *xmit_buf;
200 int xmit_head;
201 int xmit_tail;
202 int xmit_cnt;
203
204 wait_queue_head_t open_wait;
205 wait_queue_head_t close_wait;
206
207 wait_queue_head_t status_event_wait_q;
208 wait_queue_head_t event_wait_q;
209 struct timer_list tx_timer; /* HDLC transmit timeout timer */
210 struct mgsl_struct *next_device; /* device list link */
211
212 spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
213 struct work_struct task; /* task structure for scheduling bh */
214
215 u32 EventMask; /* event trigger mask */
216 u32 RecordedEvents; /* pending events */
217
218 u32 max_frame_size; /* as set by device config */
219
220 u32 pending_bh;
221
222 int bh_running; /* Protection from multiple */
223 int isr_overflow;
224 int bh_requested;
225
226 int dcd_chkcount; /* check counts to prevent */
227 int cts_chkcount; /* too many IRQs if a signal */
228 int dsr_chkcount; /* is floating */
229 int ri_chkcount;
230
231 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800232 u32 buffer_list_phys;
233 dma_addr_t buffer_list_dma_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234
235 unsigned int rx_buffer_count; /* count of total allocated Rx buffers */
236 DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */
237 unsigned int current_rx_buffer;
238
239 int num_tx_dma_buffers; /* number of tx dma frames required */
240 int tx_dma_buffers_used;
241 unsigned int tx_buffer_count; /* count of total allocated Tx buffers */
242 DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
243 int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
244 int current_tx_buffer; /* next tx dma buffer to be loaded */
245
246 unsigned char *intermediate_rxbuffer;
247
248 int num_tx_holding_buffers; /* number of tx holding buffer allocated */
249 int get_tx_holding_index; /* next tx holding buffer for adapter to load */
250 int put_tx_holding_index; /* next tx holding buffer to store user request */
251 int tx_holding_count; /* number of tx holding buffers waiting */
252 struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
253
254 int rx_enabled;
255 int rx_overflow;
256 int rx_rcc_underrun;
257
258 int tx_enabled;
259 int tx_active;
260 u32 idle_mode;
261
262 u16 cmr_value;
263 u16 tcsr_value;
264
265 char device_name[25]; /* device instance name */
266
267 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
268 unsigned char bus; /* expansion bus number (zero based) */
269 unsigned char function; /* PCI device number */
270
271 unsigned int io_base; /* base I/O address of adapter */
272 unsigned int io_addr_size; /* size of the I/O address range */
273 int io_addr_requested; /* nonzero if I/O address requested */
274
275 unsigned int irq_level; /* interrupt level */
276 unsigned long irq_flags;
277 int irq_requested; /* nonzero if IRQ requested */
278
279 unsigned int dma_level; /* DMA channel */
280 int dma_requested; /* nonzero if dma channel requested */
281
282 u16 mbre_bit;
283 u16 loopback_bits;
284 u16 usc_idle_mode;
285
286 MGSL_PARAMS params; /* communications parameters */
287
288 unsigned char serial_signals; /* current serial signal states */
289
290 int irq_occurred; /* for diagnostics use */
291 unsigned int init_error; /* Initialization startup error (DIAGS) */
292 int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */
293
294 u32 last_mem_alloc;
295 unsigned char* memory_base; /* shared memory address (PCI only) */
296 u32 phys_memory_base;
297 int shared_mem_requested;
298
299 unsigned char* lcr_base; /* local config registers (PCI only) */
300 u32 phys_lcr_base;
301 u32 lcr_offset;
302 int lcr_mem_requested;
303
304 u32 misc_ctrl_value;
305 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
306 char char_buf[MAX_ASYNC_BUFFER_SIZE];
307 BOOLEAN drop_rts_on_tx_done;
308
309 BOOLEAN loopmode_insert_requested;
310 BOOLEAN loopmode_send_done_requested;
311
312 struct _input_signal_events input_signal_events;
313
314 /* generic HDLC device parts */
315 int netcount;
316 int dosyncppp;
317 spinlock_t netlock;
318
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800319#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700320 struct net_device *netdev;
321#endif
322};
323
324#define MGSL_MAGIC 0x5401
325
326/*
327 * The size of the serial xmit buffer is 1 page, or 4096 bytes
328 */
329#ifndef SERIAL_XMIT_SIZE
330#define SERIAL_XMIT_SIZE 4096
331#endif
332
333/*
334 * These macros define the offsets used in calculating the
335 * I/O address of the specified USC registers.
336 */
337
338
339#define DCPIN 2 /* Bit 1 of I/O address */
340#define SDPIN 4 /* Bit 2 of I/O address */
341
342#define DCAR 0 /* DMA command/address register */
343#define CCAR SDPIN /* channel command/address register */
344#define DATAREG DCPIN + SDPIN /* serial data register */
345#define MSBONLY 0x41
346#define LSBONLY 0x40
347
348/*
349 * These macros define the register address (ordinal number)
350 * used for writing address/value pairs to the USC.
351 */
352
353#define CMR 0x02 /* Channel mode Register */
354#define CCSR 0x04 /* Channel Command/status Register */
355#define CCR 0x06 /* Channel Control Register */
356#define PSR 0x08 /* Port status Register */
357#define PCR 0x0a /* Port Control Register */
358#define TMDR 0x0c /* Test mode Data Register */
359#define TMCR 0x0e /* Test mode Control Register */
360#define CMCR 0x10 /* Clock mode Control Register */
361#define HCR 0x12 /* Hardware Configuration Register */
362#define IVR 0x14 /* Interrupt Vector Register */
363#define IOCR 0x16 /* Input/Output Control Register */
364#define ICR 0x18 /* Interrupt Control Register */
365#define DCCR 0x1a /* Daisy Chain Control Register */
366#define MISR 0x1c /* Misc Interrupt status Register */
367#define SICR 0x1e /* status Interrupt Control Register */
368#define RDR 0x20 /* Receive Data Register */
369#define RMR 0x22 /* Receive mode Register */
370#define RCSR 0x24 /* Receive Command/status Register */
371#define RICR 0x26 /* Receive Interrupt Control Register */
372#define RSR 0x28 /* Receive Sync Register */
373#define RCLR 0x2a /* Receive count Limit Register */
374#define RCCR 0x2c /* Receive Character count Register */
375#define TC0R 0x2e /* Time Constant 0 Register */
376#define TDR 0x30 /* Transmit Data Register */
377#define TMR 0x32 /* Transmit mode Register */
378#define TCSR 0x34 /* Transmit Command/status Register */
379#define TICR 0x36 /* Transmit Interrupt Control Register */
380#define TSR 0x38 /* Transmit Sync Register */
381#define TCLR 0x3a /* Transmit count Limit Register */
382#define TCCR 0x3c /* Transmit Character count Register */
383#define TC1R 0x3e /* Time Constant 1 Register */
384
385
386/*
387 * MACRO DEFINITIONS FOR DMA REGISTERS
388 */
389
390#define DCR 0x06 /* DMA Control Register (shared) */
391#define DACR 0x08 /* DMA Array count Register (shared) */
392#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
393#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
394#define DICR 0x18 /* DMA Interrupt Control Register (shared) */
395#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
396#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
397
398#define TDMR 0x02 /* Transmit DMA mode Register */
399#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */
400#define TBCR 0x2a /* Transmit Byte count Register */
401#define TARL 0x2c /* Transmit Address Register (low) */
402#define TARU 0x2e /* Transmit Address Register (high) */
403#define NTBCR 0x3a /* Next Transmit Byte count Register */
404#define NTARL 0x3c /* Next Transmit Address Register (low) */
405#define NTARU 0x3e /* Next Transmit Address Register (high) */
406
407#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */
408#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */
409#define RBCR 0xaa /* Receive Byte count Register */
410#define RARL 0xac /* Receive Address Register (low) */
411#define RARU 0xae /* Receive Address Register (high) */
412#define NRBCR 0xba /* Next Receive Byte count Register */
413#define NRARL 0xbc /* Next Receive Address Register (low) */
414#define NRARU 0xbe /* Next Receive Address Register (high) */
415
416
417/*
418 * MACRO DEFINITIONS FOR MODEM STATUS BITS
419 */
420
421#define MODEMSTATUS_DTR 0x80
422#define MODEMSTATUS_DSR 0x40
423#define MODEMSTATUS_RTS 0x20
424#define MODEMSTATUS_CTS 0x10
425#define MODEMSTATUS_RI 0x04
426#define MODEMSTATUS_DCD 0x01
427
428
429/*
430 * Channel Command/Address Register (CCAR) Command Codes
431 */
432
433#define RTCmd_Null 0x0000
434#define RTCmd_ResetHighestIus 0x1000
435#define RTCmd_TriggerChannelLoadDma 0x2000
436#define RTCmd_TriggerRxDma 0x2800
437#define RTCmd_TriggerTxDma 0x3000
438#define RTCmd_TriggerRxAndTxDma 0x3800
439#define RTCmd_PurgeRxFifo 0x4800
440#define RTCmd_PurgeTxFifo 0x5000
441#define RTCmd_PurgeRxAndTxFifo 0x5800
442#define RTCmd_LoadRcc 0x6800
443#define RTCmd_LoadTcc 0x7000
444#define RTCmd_LoadRccAndTcc 0x7800
445#define RTCmd_LoadTC0 0x8800
446#define RTCmd_LoadTC1 0x9000
447#define RTCmd_LoadTC0AndTC1 0x9800
448#define RTCmd_SerialDataLSBFirst 0xa000
449#define RTCmd_SerialDataMSBFirst 0xa800
450#define RTCmd_SelectBigEndian 0xb000
451#define RTCmd_SelectLittleEndian 0xb800
452
453
454/*
455 * DMA Command/Address Register (DCAR) Command Codes
456 */
457
458#define DmaCmd_Null 0x0000
459#define DmaCmd_ResetTxChannel 0x1000
460#define DmaCmd_ResetRxChannel 0x1200
461#define DmaCmd_StartTxChannel 0x2000
462#define DmaCmd_StartRxChannel 0x2200
463#define DmaCmd_ContinueTxChannel 0x3000
464#define DmaCmd_ContinueRxChannel 0x3200
465#define DmaCmd_PauseTxChannel 0x4000
466#define DmaCmd_PauseRxChannel 0x4200
467#define DmaCmd_AbortTxChannel 0x5000
468#define DmaCmd_AbortRxChannel 0x5200
469#define DmaCmd_InitTxChannel 0x7000
470#define DmaCmd_InitRxChannel 0x7200
471#define DmaCmd_ResetHighestDmaIus 0x8000
472#define DmaCmd_ResetAllChannels 0x9000
473#define DmaCmd_StartAllChannels 0xa000
474#define DmaCmd_ContinueAllChannels 0xb000
475#define DmaCmd_PauseAllChannels 0xc000
476#define DmaCmd_AbortAllChannels 0xd000
477#define DmaCmd_InitAllChannels 0xf000
478
479#define TCmd_Null 0x0000
480#define TCmd_ClearTxCRC 0x2000
481#define TCmd_SelectTicrTtsaData 0x4000
482#define TCmd_SelectTicrTxFifostatus 0x5000
483#define TCmd_SelectTicrIntLevel 0x6000
484#define TCmd_SelectTicrdma_level 0x7000
485#define TCmd_SendFrame 0x8000
486#define TCmd_SendAbort 0x9000
487#define TCmd_EnableDleInsertion 0xc000
488#define TCmd_DisableDleInsertion 0xd000
489#define TCmd_ClearEofEom 0xe000
490#define TCmd_SetEofEom 0xf000
491
492#define RCmd_Null 0x0000
493#define RCmd_ClearRxCRC 0x2000
494#define RCmd_EnterHuntmode 0x3000
495#define RCmd_SelectRicrRtsaData 0x4000
496#define RCmd_SelectRicrRxFifostatus 0x5000
497#define RCmd_SelectRicrIntLevel 0x6000
498#define RCmd_SelectRicrdma_level 0x7000
499
500/*
501 * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
502 */
503
504#define RECEIVE_STATUS BIT5
505#define RECEIVE_DATA BIT4
506#define TRANSMIT_STATUS BIT3
507#define TRANSMIT_DATA BIT2
508#define IO_PIN BIT1
509#define MISC BIT0
510
511
512/*
513 * Receive status Bits in Receive Command/status Register RCSR
514 */
515
516#define RXSTATUS_SHORT_FRAME BIT8
517#define RXSTATUS_CODE_VIOLATION BIT8
518#define RXSTATUS_EXITED_HUNT BIT7
519#define RXSTATUS_IDLE_RECEIVED BIT6
520#define RXSTATUS_BREAK_RECEIVED BIT5
521#define RXSTATUS_ABORT_RECEIVED BIT5
522#define RXSTATUS_RXBOUND BIT4
523#define RXSTATUS_CRC_ERROR BIT3
524#define RXSTATUS_FRAMING_ERROR BIT3
525#define RXSTATUS_ABORT BIT2
526#define RXSTATUS_PARITY_ERROR BIT2
527#define RXSTATUS_OVERRUN BIT1
528#define RXSTATUS_DATA_AVAILABLE BIT0
529#define RXSTATUS_ALL 0x01f6
530#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
531
532/*
533 * Values for setting transmit idle mode in
534 * Transmit Control/status Register (TCSR)
535 */
536#define IDLEMODE_FLAGS 0x0000
537#define IDLEMODE_ALT_ONE_ZERO 0x0100
538#define IDLEMODE_ZERO 0x0200
539#define IDLEMODE_ONE 0x0300
540#define IDLEMODE_ALT_MARK_SPACE 0x0500
541#define IDLEMODE_SPACE 0x0600
542#define IDLEMODE_MARK 0x0700
543#define IDLEMODE_MASK 0x0700
544
545/*
546 * IUSC revision identifiers
547 */
548#define IUSC_SL1660 0x4d44
549#define IUSC_PRE_SL1660 0x4553
550
551/*
552 * Transmit status Bits in Transmit Command/status Register (TCSR)
553 */
554
555#define TCSR_PRESERVE 0x0F00
556
557#define TCSR_UNDERWAIT BIT11
558#define TXSTATUS_PREAMBLE_SENT BIT7
559#define TXSTATUS_IDLE_SENT BIT6
560#define TXSTATUS_ABORT_SENT BIT5
561#define TXSTATUS_EOF_SENT BIT4
562#define TXSTATUS_EOM_SENT BIT4
563#define TXSTATUS_CRC_SENT BIT3
564#define TXSTATUS_ALL_SENT BIT2
565#define TXSTATUS_UNDERRUN BIT1
566#define TXSTATUS_FIFO_EMPTY BIT0
567#define TXSTATUS_ALL 0x00fa
568#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
569
570
571#define MISCSTATUS_RXC_LATCHED BIT15
572#define MISCSTATUS_RXC BIT14
573#define MISCSTATUS_TXC_LATCHED BIT13
574#define MISCSTATUS_TXC BIT12
575#define MISCSTATUS_RI_LATCHED BIT11
576#define MISCSTATUS_RI BIT10
577#define MISCSTATUS_DSR_LATCHED BIT9
578#define MISCSTATUS_DSR BIT8
579#define MISCSTATUS_DCD_LATCHED BIT7
580#define MISCSTATUS_DCD BIT6
581#define MISCSTATUS_CTS_LATCHED BIT5
582#define MISCSTATUS_CTS BIT4
583#define MISCSTATUS_RCC_UNDERRUN BIT3
584#define MISCSTATUS_DPLL_NO_SYNC BIT2
585#define MISCSTATUS_BRG1_ZERO BIT1
586#define MISCSTATUS_BRG0_ZERO BIT0
587
588#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
589#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
590
591#define SICR_RXC_ACTIVE BIT15
592#define SICR_RXC_INACTIVE BIT14
593#define SICR_RXC (BIT15+BIT14)
594#define SICR_TXC_ACTIVE BIT13
595#define SICR_TXC_INACTIVE BIT12
596#define SICR_TXC (BIT13+BIT12)
597#define SICR_RI_ACTIVE BIT11
598#define SICR_RI_INACTIVE BIT10
599#define SICR_RI (BIT11+BIT10)
600#define SICR_DSR_ACTIVE BIT9
601#define SICR_DSR_INACTIVE BIT8
602#define SICR_DSR (BIT9+BIT8)
603#define SICR_DCD_ACTIVE BIT7
604#define SICR_DCD_INACTIVE BIT6
605#define SICR_DCD (BIT7+BIT6)
606#define SICR_CTS_ACTIVE BIT5
607#define SICR_CTS_INACTIVE BIT4
608#define SICR_CTS (BIT5+BIT4)
609#define SICR_RCC_UNDERFLOW BIT3
610#define SICR_DPLL_NO_SYNC BIT2
611#define SICR_BRG1_ZERO BIT1
612#define SICR_BRG0_ZERO BIT0
613
614void usc_DisableMasterIrqBit( struct mgsl_struct *info );
615void usc_EnableMasterIrqBit( struct mgsl_struct *info );
616void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
617void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
618void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
619
620#define usc_EnableInterrupts( a, b ) \
621 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
622
623#define usc_DisableInterrupts( a, b ) \
624 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
625
626#define usc_EnableMasterIrqBit(a) \
627 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
628
629#define usc_DisableMasterIrqBit(a) \
630 usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
631
632#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
633
634/*
635 * Transmit status Bits in Transmit Control status Register (TCSR)
636 * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
637 */
638
639#define TXSTATUS_PREAMBLE_SENT BIT7
640#define TXSTATUS_IDLE_SENT BIT6
641#define TXSTATUS_ABORT_SENT BIT5
642#define TXSTATUS_EOF BIT4
643#define TXSTATUS_CRC_SENT BIT3
644#define TXSTATUS_ALL_SENT BIT2
645#define TXSTATUS_UNDERRUN BIT1
646#define TXSTATUS_FIFO_EMPTY BIT0
647
648#define DICR_MASTER BIT15
649#define DICR_TRANSMIT BIT0
650#define DICR_RECEIVE BIT1
651
652#define usc_EnableDmaInterrupts(a,b) \
653 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
654
655#define usc_DisableDmaInterrupts(a,b) \
656 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
657
658#define usc_EnableStatusIrqs(a,b) \
659 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
660
661#define usc_DisablestatusIrqs(a,b) \
662 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
663
664/* Transmit status Bits in Transmit Control status Register (TCSR) */
665/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
666
667
668#define DISABLE_UNCONDITIONAL 0
669#define DISABLE_END_OF_FRAME 1
670#define ENABLE_UNCONDITIONAL 2
671#define ENABLE_AUTO_CTS 3
672#define ENABLE_AUTO_DCD 3
673#define usc_EnableTransmitter(a,b) \
674 usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
675#define usc_EnableReceiver(a,b) \
676 usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
677
678static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port );
679static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
680static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
681
682static u16 usc_InReg( struct mgsl_struct *info, u16 Port );
683static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
684static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
685void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
686void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
687
688#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
689#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
690
691#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
692
693static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
694static void usc_start_receiver( struct mgsl_struct *info );
695static void usc_stop_receiver( struct mgsl_struct *info );
696
697static void usc_start_transmitter( struct mgsl_struct *info );
698static void usc_stop_transmitter( struct mgsl_struct *info );
699static void usc_set_txidle( struct mgsl_struct *info );
700static void usc_load_txfifo( struct mgsl_struct *info );
701
702static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
703static void usc_enable_loopback( struct mgsl_struct *info, int enable );
704
705static void usc_get_serial_signals( struct mgsl_struct *info );
706static void usc_set_serial_signals( struct mgsl_struct *info );
707
708static void usc_reset( struct mgsl_struct *info );
709
710static void usc_set_sync_mode( struct mgsl_struct *info );
711static void usc_set_sdlc_mode( struct mgsl_struct *info );
712static void usc_set_async_mode( struct mgsl_struct *info );
713static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
714
715static void usc_loopback_frame( struct mgsl_struct *info );
716
717static void mgsl_tx_timeout(unsigned long context);
718
719
720static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
721static void usc_loopmode_insert_request( struct mgsl_struct * info );
722static int usc_loopmode_active( struct mgsl_struct * info);
723static void usc_loopmode_send_done( struct mgsl_struct * info );
724
725static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
726
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800727#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700728#define dev_to_port(D) (dev_to_hdlc(D)->priv)
729static void hdlcdev_tx_done(struct mgsl_struct *info);
730static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
731static int hdlcdev_init(struct mgsl_struct *info);
732static void hdlcdev_exit(struct mgsl_struct *info);
733#endif
734
735/*
736 * Defines a BUS descriptor value for the PCI adapter
737 * local bus address ranges.
738 */
739
740#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
741(0x00400020 + \
742((WrHold) << 30) + \
743((WrDly) << 28) + \
744((RdDly) << 26) + \
745((Nwdd) << 20) + \
746((Nwad) << 15) + \
747((Nxda) << 13) + \
748((Nrdd) << 11) + \
749((Nrad) << 6) )
750
751static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
752
753/*
754 * Adapter diagnostic routines
755 */
756static BOOLEAN mgsl_register_test( struct mgsl_struct *info );
757static BOOLEAN mgsl_irq_test( struct mgsl_struct *info );
758static BOOLEAN mgsl_dma_test( struct mgsl_struct *info );
759static BOOLEAN mgsl_memory_test( struct mgsl_struct *info );
760static int mgsl_adapter_test( struct mgsl_struct *info );
761
762/*
763 * device and resource management routines
764 */
765static int mgsl_claim_resources(struct mgsl_struct *info);
766static void mgsl_release_resources(struct mgsl_struct *info);
767static void mgsl_add_device(struct mgsl_struct *info);
768static struct mgsl_struct* mgsl_allocate_device(void);
769
770/*
771 * DMA buffer manupulation functions.
772 */
773static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
774static int mgsl_get_rx_frame( struct mgsl_struct *info );
775static int mgsl_get_raw_rx_frame( struct mgsl_struct *info );
776static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
777static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
778static int num_free_tx_dma_buffers(struct mgsl_struct *info);
779static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
780static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
781
782/*
783 * DMA and Shared Memory buffer allocation and formatting
784 */
785static int mgsl_allocate_dma_buffers(struct mgsl_struct *info);
786static void mgsl_free_dma_buffers(struct mgsl_struct *info);
787static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
788static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
789static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
790static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
791static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
792static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
793static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
794static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
795static int load_next_tx_holding_buffer(struct mgsl_struct *info);
796static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
797
798/*
799 * Bottom half interrupt handlers
800 */
David Howellsc4028952006-11-22 14:57:56 +0000801static void mgsl_bh_handler(struct work_struct *work);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802static void mgsl_bh_receive(struct mgsl_struct *info);
803static void mgsl_bh_transmit(struct mgsl_struct *info);
804static void mgsl_bh_status(struct mgsl_struct *info);
805
806/*
807 * Interrupt handler routines and dispatch table.
808 */
809static void mgsl_isr_null( struct mgsl_struct *info );
810static void mgsl_isr_transmit_data( struct mgsl_struct *info );
811static void mgsl_isr_receive_data( struct mgsl_struct *info );
812static void mgsl_isr_receive_status( struct mgsl_struct *info );
813static void mgsl_isr_transmit_status( struct mgsl_struct *info );
814static void mgsl_isr_io_pin( struct mgsl_struct *info );
815static void mgsl_isr_misc( struct mgsl_struct *info );
816static void mgsl_isr_receive_dma( struct mgsl_struct *info );
817static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
818
819typedef void (*isr_dispatch_func)(struct mgsl_struct *);
820
821static isr_dispatch_func UscIsrTable[7] =
822{
823 mgsl_isr_null,
824 mgsl_isr_misc,
825 mgsl_isr_io_pin,
826 mgsl_isr_transmit_data,
827 mgsl_isr_transmit_status,
828 mgsl_isr_receive_data,
829 mgsl_isr_receive_status
830};
831
832/*
833 * ioctl call handlers
834 */
835static int tiocmget(struct tty_struct *tty, struct file *file);
836static int tiocmset(struct tty_struct *tty, struct file *file,
837 unsigned int set, unsigned int clear);
838static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
839 __user *user_icount);
840static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params);
841static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params);
842static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
843static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
844static int mgsl_txenable(struct mgsl_struct * info, int enable);
845static int mgsl_txabort(struct mgsl_struct * info);
846static int mgsl_rxenable(struct mgsl_struct * info, int enable);
847static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
848static int mgsl_loopmode_send_done( struct mgsl_struct * info );
849
850/* set non-zero on successful registration with PCI subsystem */
851static int pci_registered;
852
853/*
854 * Global linked list of SyncLink devices
855 */
856static struct mgsl_struct *mgsl_device_list;
857static int mgsl_device_count;
858
859/*
860 * Set this param to non-zero to load eax with the
861 * .text section address and breakpoint on module load.
862 * This is useful for use with gdb and add-symbol-file command.
863 */
864static int break_on_load;
865
866/*
867 * Driver major number, defaults to zero to get auto
868 * assigned major number. May be forced as module parameter.
869 */
870static int ttymajor;
871
872/*
873 * Array of user specified options for ISA adapters.
874 */
875static int io[MAX_ISA_DEVICES];
876static int irq[MAX_ISA_DEVICES];
877static int dma[MAX_ISA_DEVICES];
878static int debug_level;
879static int maxframe[MAX_TOTAL_DEVICES];
880static int dosyncppp[MAX_TOTAL_DEVICES];
881static int txdmabufs[MAX_TOTAL_DEVICES];
882static int txholdbufs[MAX_TOTAL_DEVICES];
883
884module_param(break_on_load, bool, 0);
885module_param(ttymajor, int, 0);
886module_param_array(io, int, NULL, 0);
887module_param_array(irq, int, NULL, 0);
888module_param_array(dma, int, NULL, 0);
889module_param(debug_level, int, 0);
890module_param_array(maxframe, int, NULL, 0);
891module_param_array(dosyncppp, int, NULL, 0);
892module_param_array(txdmabufs, int, NULL, 0);
893module_param_array(txholdbufs, int, NULL, 0);
894
895static char *driver_name = "SyncLink serial driver";
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800896static char *driver_version = "$Revision: 4.38 $";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700897
898static int synclink_init_one (struct pci_dev *dev,
899 const struct pci_device_id *ent);
900static void synclink_remove_one (struct pci_dev *dev);
901
902static struct pci_device_id synclink_pci_tbl[] = {
903 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
904 { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
905 { 0, }, /* terminate list */
906};
907MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
908
909MODULE_LICENSE("GPL");
910
911static struct pci_driver synclink_pci_driver = {
912 .name = "synclink",
913 .id_table = synclink_pci_tbl,
914 .probe = synclink_init_one,
915 .remove = __devexit_p(synclink_remove_one),
916};
917
918static struct tty_driver *serial_driver;
919
920/* number of characters left in xmit buffer before we ask for more */
921#define WAKEUP_CHARS 256
922
923
924static void mgsl_change_params(struct mgsl_struct *info);
925static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
926
927/*
928 * 1st function defined in .text section. Calling this function in
929 * init_module() followed by a breakpoint allows a remote debugger
930 * (gdb) to get the .text address for the add-symbol-file command.
931 * This allows remote debugging of dynamically loadable modules.
932 */
933static void* mgsl_get_text_ptr(void)
934{
935 return mgsl_get_text_ptr;
936}
937
Linus Torvalds1da177e2005-04-16 15:20:36 -0700938static inline int mgsl_paranoia_check(struct mgsl_struct *info,
939 char *name, const char *routine)
940{
941#ifdef MGSL_PARANOIA_CHECK
942 static const char *badmagic =
943 "Warning: bad magic number for mgsl struct (%s) in %s\n";
944 static const char *badinfo =
945 "Warning: null mgsl_struct for (%s) in %s\n";
946
947 if (!info) {
948 printk(badinfo, name, routine);
949 return 1;
950 }
951 if (info->magic != MGSL_MAGIC) {
952 printk(badmagic, name, routine);
953 return 1;
954 }
955#else
956 if (!info)
957 return 1;
958#endif
959 return 0;
960}
961
962/**
963 * line discipline callback wrappers
964 *
965 * The wrappers maintain line discipline references
966 * while calling into the line discipline.
967 *
968 * ldisc_receive_buf - pass receive data to line discipline
969 */
970
971static void ldisc_receive_buf(struct tty_struct *tty,
972 const __u8 *data, char *flags, int count)
973{
974 struct tty_ldisc *ld;
975 if (!tty)
976 return;
977 ld = tty_ldisc_ref(tty);
978 if (ld) {
979 if (ld->receive_buf)
980 ld->receive_buf(tty, data, flags, count);
981 tty_ldisc_deref(ld);
982 }
983}
984
985/* mgsl_stop() throttle (stop) transmitter
986 *
987 * Arguments: tty pointer to tty info structure
988 * Return Value: None
989 */
990static void mgsl_stop(struct tty_struct *tty)
991{
992 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
993 unsigned long flags;
994
995 if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
996 return;
997
998 if ( debug_level >= DEBUG_LEVEL_INFO )
999 printk("mgsl_stop(%s)\n",info->device_name);
1000
1001 spin_lock_irqsave(&info->irq_spinlock,flags);
1002 if (info->tx_enabled)
1003 usc_stop_transmitter(info);
1004 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1005
1006} /* end of mgsl_stop() */
1007
1008/* mgsl_start() release (start) transmitter
1009 *
1010 * Arguments: tty pointer to tty info structure
1011 * Return Value: None
1012 */
1013static void mgsl_start(struct tty_struct *tty)
1014{
1015 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
1016 unsigned long flags;
1017
1018 if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
1019 return;
1020
1021 if ( debug_level >= DEBUG_LEVEL_INFO )
1022 printk("mgsl_start(%s)\n",info->device_name);
1023
1024 spin_lock_irqsave(&info->irq_spinlock,flags);
1025 if (!info->tx_enabled)
1026 usc_start_transmitter(info);
1027 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1028
1029} /* end of mgsl_start() */
1030
1031/*
1032 * Bottom half work queue access functions
1033 */
1034
1035/* mgsl_bh_action() Return next bottom half action to perform.
1036 * Return Value: BH action code or 0 if nothing to do.
1037 */
1038static int mgsl_bh_action(struct mgsl_struct *info)
1039{
1040 unsigned long flags;
1041 int rc = 0;
1042
1043 spin_lock_irqsave(&info->irq_spinlock,flags);
1044
1045 if (info->pending_bh & BH_RECEIVE) {
1046 info->pending_bh &= ~BH_RECEIVE;
1047 rc = BH_RECEIVE;
1048 } else if (info->pending_bh & BH_TRANSMIT) {
1049 info->pending_bh &= ~BH_TRANSMIT;
1050 rc = BH_TRANSMIT;
1051 } else if (info->pending_bh & BH_STATUS) {
1052 info->pending_bh &= ~BH_STATUS;
1053 rc = BH_STATUS;
1054 }
1055
1056 if (!rc) {
1057 /* Mark BH routine as complete */
1058 info->bh_running = 0;
1059 info->bh_requested = 0;
1060 }
1061
1062 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1063
1064 return rc;
1065}
1066
1067/*
1068 * Perform bottom half processing of work items queued by ISR.
1069 */
David Howellsc4028952006-11-22 14:57:56 +00001070static void mgsl_bh_handler(struct work_struct *work)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001071{
David Howellsc4028952006-11-22 14:57:56 +00001072 struct mgsl_struct *info =
1073 container_of(work, struct mgsl_struct, task);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001074 int action;
1075
1076 if (!info)
1077 return;
1078
1079 if ( debug_level >= DEBUG_LEVEL_BH )
1080 printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
1081 __FILE__,__LINE__,info->device_name);
1082
1083 info->bh_running = 1;
1084
1085 while((action = mgsl_bh_action(info)) != 0) {
1086
1087 /* Process work item */
1088 if ( debug_level >= DEBUG_LEVEL_BH )
1089 printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
1090 __FILE__,__LINE__,action);
1091
1092 switch (action) {
1093
1094 case BH_RECEIVE:
1095 mgsl_bh_receive(info);
1096 break;
1097 case BH_TRANSMIT:
1098 mgsl_bh_transmit(info);
1099 break;
1100 case BH_STATUS:
1101 mgsl_bh_status(info);
1102 break;
1103 default:
1104 /* unknown work item ID */
1105 printk("Unknown work item ID=%08X!\n", action);
1106 break;
1107 }
1108 }
1109
1110 if ( debug_level >= DEBUG_LEVEL_BH )
1111 printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
1112 __FILE__,__LINE__,info->device_name);
1113}
1114
1115static void mgsl_bh_receive(struct mgsl_struct *info)
1116{
1117 int (*get_rx_frame)(struct mgsl_struct *info) =
1118 (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
1119
1120 if ( debug_level >= DEBUG_LEVEL_BH )
1121 printk( "%s(%d):mgsl_bh_receive(%s)\n",
1122 __FILE__,__LINE__,info->device_name);
1123
1124 do
1125 {
1126 if (info->rx_rcc_underrun) {
1127 unsigned long flags;
1128 spin_lock_irqsave(&info->irq_spinlock,flags);
1129 usc_start_receiver(info);
1130 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1131 return;
1132 }
1133 } while(get_rx_frame(info));
1134}
1135
1136static void mgsl_bh_transmit(struct mgsl_struct *info)
1137{
1138 struct tty_struct *tty = info->tty;
1139 unsigned long flags;
1140
1141 if ( debug_level >= DEBUG_LEVEL_BH )
1142 printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
1143 __FILE__,__LINE__,info->device_name);
1144
Jiri Slabyb963a842007-02-10 01:44:55 -08001145 if (tty)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146 tty_wakeup(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001147
1148 /* if transmitter idle and loopmode_send_done_requested
1149 * then start echoing RxD to TxD
1150 */
1151 spin_lock_irqsave(&info->irq_spinlock,flags);
1152 if ( !info->tx_active && info->loopmode_send_done_requested )
1153 usc_loopmode_send_done( info );
1154 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1155}
1156
1157static void mgsl_bh_status(struct mgsl_struct *info)
1158{
1159 if ( debug_level >= DEBUG_LEVEL_BH )
1160 printk( "%s(%d):mgsl_bh_status() entry on %s\n",
1161 __FILE__,__LINE__,info->device_name);
1162
1163 info->ri_chkcount = 0;
1164 info->dsr_chkcount = 0;
1165 info->dcd_chkcount = 0;
1166 info->cts_chkcount = 0;
1167}
1168
1169/* mgsl_isr_receive_status()
1170 *
1171 * Service a receive status interrupt. The type of status
1172 * interrupt is indicated by the state of the RCSR.
1173 * This is only used for HDLC mode.
1174 *
1175 * Arguments: info pointer to device instance data
1176 * Return Value: None
1177 */
1178static void mgsl_isr_receive_status( struct mgsl_struct *info )
1179{
1180 u16 status = usc_InReg( info, RCSR );
1181
1182 if ( debug_level >= DEBUG_LEVEL_ISR )
1183 printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
1184 __FILE__,__LINE__,status);
1185
1186 if ( (status & RXSTATUS_ABORT_RECEIVED) &&
1187 info->loopmode_insert_requested &&
1188 usc_loopmode_active(info) )
1189 {
1190 ++info->icount.rxabort;
1191 info->loopmode_insert_requested = FALSE;
1192
1193 /* clear CMR:13 to start echoing RxD to TxD */
1194 info->cmr_value &= ~BIT13;
1195 usc_OutReg(info, CMR, info->cmr_value);
1196
1197 /* disable received abort irq (no longer required) */
1198 usc_OutReg(info, RICR,
1199 (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
1200 }
1201
1202 if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) {
1203 if (status & RXSTATUS_EXITED_HUNT)
1204 info->icount.exithunt++;
1205 if (status & RXSTATUS_IDLE_RECEIVED)
1206 info->icount.rxidle++;
1207 wake_up_interruptible(&info->event_wait_q);
1208 }
1209
1210 if (status & RXSTATUS_OVERRUN){
1211 info->icount.rxover++;
1212 usc_process_rxoverrun_sync( info );
1213 }
1214
1215 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
1216 usc_UnlatchRxstatusBits( info, status );
1217
1218} /* end of mgsl_isr_receive_status() */
1219
1220/* mgsl_isr_transmit_status()
1221 *
1222 * Service a transmit status interrupt
1223 * HDLC mode :end of transmit frame
1224 * Async mode:all data is sent
1225 * transmit status is indicated by bits in the TCSR.
1226 *
1227 * Arguments: info pointer to device instance data
1228 * Return Value: None
1229 */
1230static void mgsl_isr_transmit_status( struct mgsl_struct *info )
1231{
1232 u16 status = usc_InReg( info, TCSR );
1233
1234 if ( debug_level >= DEBUG_LEVEL_ISR )
1235 printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
1236 __FILE__,__LINE__,status);
1237
1238 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
1239 usc_UnlatchTxstatusBits( info, status );
1240
1241 if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
1242 {
1243 /* finished sending HDLC abort. This may leave */
1244 /* the TxFifo with data from the aborted frame */
1245 /* so purge the TxFifo. Also shutdown the DMA */
1246 /* channel in case there is data remaining in */
1247 /* the DMA buffer */
1248 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
1249 usc_RTCmd( info, RTCmd_PurgeTxFifo );
1250 }
1251
1252 if ( status & TXSTATUS_EOF_SENT )
1253 info->icount.txok++;
1254 else if ( status & TXSTATUS_UNDERRUN )
1255 info->icount.txunder++;
1256 else if ( status & TXSTATUS_ABORT_SENT )
1257 info->icount.txabort++;
1258 else
1259 info->icount.txunder++;
1260
1261 info->tx_active = 0;
1262 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1263 del_timer(&info->tx_timer);
1264
1265 if ( info->drop_rts_on_tx_done ) {
1266 usc_get_serial_signals( info );
1267 if ( info->serial_signals & SerialSignal_RTS ) {
1268 info->serial_signals &= ~SerialSignal_RTS;
1269 usc_set_serial_signals( info );
1270 }
1271 info->drop_rts_on_tx_done = 0;
1272 }
1273
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08001274#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001275 if (info->netcount)
1276 hdlcdev_tx_done(info);
1277 else
1278#endif
1279 {
1280 if (info->tty->stopped || info->tty->hw_stopped) {
1281 usc_stop_transmitter(info);
1282 return;
1283 }
1284 info->pending_bh |= BH_TRANSMIT;
1285 }
1286
1287} /* end of mgsl_isr_transmit_status() */
1288
1289/* mgsl_isr_io_pin()
1290 *
1291 * Service an Input/Output pin interrupt. The type of
1292 * interrupt is indicated by bits in the MISR
1293 *
1294 * Arguments: info pointer to device instance data
1295 * Return Value: None
1296 */
1297static void mgsl_isr_io_pin( struct mgsl_struct *info )
1298{
1299 struct mgsl_icount *icount;
1300 u16 status = usc_InReg( info, MISR );
1301
1302 if ( debug_level >= DEBUG_LEVEL_ISR )
1303 printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
1304 __FILE__,__LINE__,status);
1305
1306 usc_ClearIrqPendingBits( info, IO_PIN );
1307 usc_UnlatchIostatusBits( info, status );
1308
1309 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
1310 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
1311 icount = &info->icount;
1312 /* update input line counters */
1313 if (status & MISCSTATUS_RI_LATCHED) {
1314 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1315 usc_DisablestatusIrqs(info,SICR_RI);
1316 icount->rng++;
1317 if ( status & MISCSTATUS_RI )
1318 info->input_signal_events.ri_up++;
1319 else
1320 info->input_signal_events.ri_down++;
1321 }
1322 if (status & MISCSTATUS_DSR_LATCHED) {
1323 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1324 usc_DisablestatusIrqs(info,SICR_DSR);
1325 icount->dsr++;
1326 if ( status & MISCSTATUS_DSR )
1327 info->input_signal_events.dsr_up++;
1328 else
1329 info->input_signal_events.dsr_down++;
1330 }
1331 if (status & MISCSTATUS_DCD_LATCHED) {
1332 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1333 usc_DisablestatusIrqs(info,SICR_DCD);
1334 icount->dcd++;
1335 if (status & MISCSTATUS_DCD) {
1336 info->input_signal_events.dcd_up++;
1337 } else
1338 info->input_signal_events.dcd_down++;
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08001339#if SYNCLINK_GENERIC_HDLC
Krzysztof Halasafbeff3c2006-07-21 14:44:55 -07001340 if (info->netcount) {
1341 if (status & MISCSTATUS_DCD)
1342 netif_carrier_on(info->netdev);
1343 else
1344 netif_carrier_off(info->netdev);
1345 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001346#endif
1347 }
1348 if (status & MISCSTATUS_CTS_LATCHED)
1349 {
1350 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1351 usc_DisablestatusIrqs(info,SICR_CTS);
1352 icount->cts++;
1353 if ( status & MISCSTATUS_CTS )
1354 info->input_signal_events.cts_up++;
1355 else
1356 info->input_signal_events.cts_down++;
1357 }
1358 wake_up_interruptible(&info->status_event_wait_q);
1359 wake_up_interruptible(&info->event_wait_q);
1360
1361 if ( (info->flags & ASYNC_CHECK_CD) &&
1362 (status & MISCSTATUS_DCD_LATCHED) ) {
1363 if ( debug_level >= DEBUG_LEVEL_ISR )
1364 printk("%s CD now %s...", info->device_name,
1365 (status & MISCSTATUS_DCD) ? "on" : "off");
1366 if (status & MISCSTATUS_DCD)
1367 wake_up_interruptible(&info->open_wait);
1368 else {
1369 if ( debug_level >= DEBUG_LEVEL_ISR )
1370 printk("doing serial hangup...");
1371 if (info->tty)
1372 tty_hangup(info->tty);
1373 }
1374 }
1375
1376 if ( (info->flags & ASYNC_CTS_FLOW) &&
1377 (status & MISCSTATUS_CTS_LATCHED) ) {
1378 if (info->tty->hw_stopped) {
1379 if (status & MISCSTATUS_CTS) {
1380 if ( debug_level >= DEBUG_LEVEL_ISR )
1381 printk("CTS tx start...");
1382 if (info->tty)
1383 info->tty->hw_stopped = 0;
1384 usc_start_transmitter(info);
1385 info->pending_bh |= BH_TRANSMIT;
1386 return;
1387 }
1388 } else {
1389 if (!(status & MISCSTATUS_CTS)) {
1390 if ( debug_level >= DEBUG_LEVEL_ISR )
1391 printk("CTS tx stop...");
1392 if (info->tty)
1393 info->tty->hw_stopped = 1;
1394 usc_stop_transmitter(info);
1395 }
1396 }
1397 }
1398 }
1399
1400 info->pending_bh |= BH_STATUS;
1401
1402 /* for diagnostics set IRQ flag */
1403 if ( status & MISCSTATUS_TXC_LATCHED ){
1404 usc_OutReg( info, SICR,
1405 (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
1406 usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
1407 info->irq_occurred = 1;
1408 }
1409
1410} /* end of mgsl_isr_io_pin() */
1411
1412/* mgsl_isr_transmit_data()
1413 *
1414 * Service a transmit data interrupt (async mode only).
1415 *
1416 * Arguments: info pointer to device instance data
1417 * Return Value: None
1418 */
1419static void mgsl_isr_transmit_data( struct mgsl_struct *info )
1420{
1421 if ( debug_level >= DEBUG_LEVEL_ISR )
1422 printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
1423 __FILE__,__LINE__,info->xmit_cnt);
1424
1425 usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
1426
1427 if (info->tty->stopped || info->tty->hw_stopped) {
1428 usc_stop_transmitter(info);
1429 return;
1430 }
1431
1432 if ( info->xmit_cnt )
1433 usc_load_txfifo( info );
1434 else
1435 info->tx_active = 0;
1436
1437 if (info->xmit_cnt < WAKEUP_CHARS)
1438 info->pending_bh |= BH_TRANSMIT;
1439
1440} /* end of mgsl_isr_transmit_data() */
1441
1442/* mgsl_isr_receive_data()
1443 *
1444 * Service a receive data interrupt. This occurs
1445 * when operating in asynchronous interrupt transfer mode.
1446 * The receive data FIFO is flushed to the receive data buffers.
1447 *
1448 * Arguments: info pointer to device instance data
1449 * Return Value: None
1450 */
1451static void mgsl_isr_receive_data( struct mgsl_struct *info )
1452{
1453 int Fifocount;
1454 u16 status;
Alan Cox33f0f882006-01-09 20:54:13 -08001455 int work = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001456 unsigned char DataByte;
1457 struct tty_struct *tty = info->tty;
1458 struct mgsl_icount *icount = &info->icount;
1459
1460 if ( debug_level >= DEBUG_LEVEL_ISR )
1461 printk("%s(%d):mgsl_isr_receive_data\n",
1462 __FILE__,__LINE__);
1463
1464 usc_ClearIrqPendingBits( info, RECEIVE_DATA );
1465
1466 /* select FIFO status for RICR readback */
1467 usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
1468
1469 /* clear the Wordstatus bit so that status readback */
1470 /* only reflects the status of this byte */
1471 usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
1472
1473 /* flush the receive FIFO */
1474
1475 while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
Alan Cox33f0f882006-01-09 20:54:13 -08001476 int flag;
1477
Linus Torvalds1da177e2005-04-16 15:20:36 -07001478 /* read one byte from RxFIFO */
1479 outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
1480 info->io_base + CCAR );
1481 DataByte = inb( info->io_base + CCAR );
1482
1483 /* get the status of the received byte */
1484 status = usc_InReg(info, RCSR);
1485 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1486 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) )
1487 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
1488
Linus Torvalds1da177e2005-04-16 15:20:36 -07001489 icount->rx++;
1490
Alan Cox33f0f882006-01-09 20:54:13 -08001491 flag = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001492 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1493 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) {
1494 printk("rxerr=%04X\n",status);
1495 /* update error statistics */
1496 if ( status & RXSTATUS_BREAK_RECEIVED ) {
1497 status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR);
1498 icount->brk++;
1499 } else if (status & RXSTATUS_PARITY_ERROR)
1500 icount->parity++;
1501 else if (status & RXSTATUS_FRAMING_ERROR)
1502 icount->frame++;
1503 else if (status & RXSTATUS_OVERRUN) {
1504 /* must issue purge fifo cmd before */
1505 /* 16C32 accepts more receive chars */
1506 usc_RTCmd(info,RTCmd_PurgeRxFifo);
1507 icount->overrun++;
1508 }
1509
1510 /* discard char if tty control flags say so */
1511 if (status & info->ignore_status_mask)
1512 continue;
1513
1514 status &= info->read_status_mask;
1515
1516 if (status & RXSTATUS_BREAK_RECEIVED) {
Alan Cox33f0f882006-01-09 20:54:13 -08001517 flag = TTY_BREAK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001518 if (info->flags & ASYNC_SAK)
1519 do_SAK(tty);
1520 } else if (status & RXSTATUS_PARITY_ERROR)
Alan Cox33f0f882006-01-09 20:54:13 -08001521 flag = TTY_PARITY;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001522 else if (status & RXSTATUS_FRAMING_ERROR)
Alan Cox33f0f882006-01-09 20:54:13 -08001523 flag = TTY_FRAME;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001524 } /* end of if (error) */
Alan Cox33f0f882006-01-09 20:54:13 -08001525 tty_insert_flip_char(tty, DataByte, flag);
1526 if (status & RXSTATUS_OVERRUN) {
1527 /* Overrun is special, since it's
1528 * reported immediately, and doesn't
1529 * affect the current character
1530 */
1531 work += tty_insert_flip_char(tty, 0, TTY_OVERRUN);
1532 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001533 }
1534
1535 if ( debug_level >= DEBUG_LEVEL_ISR ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001536 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1537 __FILE__,__LINE__,icount->rx,icount->brk,
1538 icount->parity,icount->frame,icount->overrun);
1539 }
1540
Alan Cox33f0f882006-01-09 20:54:13 -08001541 if(work)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001542 tty_flip_buffer_push(tty);
1543}
1544
1545/* mgsl_isr_misc()
1546 *
1547 * Service a miscellaneos interrupt source.
1548 *
1549 * Arguments: info pointer to device extension (instance data)
1550 * Return Value: None
1551 */
1552static void mgsl_isr_misc( struct mgsl_struct *info )
1553{
1554 u16 status = usc_InReg( info, MISR );
1555
1556 if ( debug_level >= DEBUG_LEVEL_ISR )
1557 printk("%s(%d):mgsl_isr_misc status=%04X\n",
1558 __FILE__,__LINE__,status);
1559
1560 if ((status & MISCSTATUS_RCC_UNDERRUN) &&
1561 (info->params.mode == MGSL_MODE_HDLC)) {
1562
1563 /* turn off receiver and rx DMA */
1564 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
1565 usc_DmaCmd(info, DmaCmd_ResetRxChannel);
1566 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
1567 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
1568 usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS);
1569
1570 /* schedule BH handler to restart receiver */
1571 info->pending_bh |= BH_RECEIVE;
1572 info->rx_rcc_underrun = 1;
1573 }
1574
1575 usc_ClearIrqPendingBits( info, MISC );
1576 usc_UnlatchMiscstatusBits( info, status );
1577
1578} /* end of mgsl_isr_misc() */
1579
1580/* mgsl_isr_null()
1581 *
1582 * Services undefined interrupt vectors from the
1583 * USC. (hence this function SHOULD never be called)
1584 *
1585 * Arguments: info pointer to device extension (instance data)
1586 * Return Value: None
1587 */
1588static void mgsl_isr_null( struct mgsl_struct *info )
1589{
1590
1591} /* end of mgsl_isr_null() */
1592
1593/* mgsl_isr_receive_dma()
1594 *
1595 * Service a receive DMA channel interrupt.
1596 * For this driver there are two sources of receive DMA interrupts
1597 * as identified in the Receive DMA mode Register (RDMR):
1598 *
1599 * BIT3 EOA/EOL End of List, all receive buffers in receive
1600 * buffer list have been filled (no more free buffers
1601 * available). The DMA controller has shut down.
1602 *
1603 * BIT2 EOB End of Buffer. This interrupt occurs when a receive
1604 * DMA buffer is terminated in response to completion
1605 * of a good frame or a frame with errors. The status
1606 * of the frame is stored in the buffer entry in the
1607 * list of receive buffer entries.
1608 *
1609 * Arguments: info pointer to device instance data
1610 * Return Value: None
1611 */
1612static void mgsl_isr_receive_dma( struct mgsl_struct *info )
1613{
1614 u16 status;
1615
1616 /* clear interrupt pending and IUS bit for Rx DMA IRQ */
1617 usc_OutDmaReg( info, CDIR, BIT9+BIT1 );
1618
1619 /* Read the receive DMA status to identify interrupt type. */
1620 /* This also clears the status bits. */
1621 status = usc_InDmaReg( info, RDMR );
1622
1623 if ( debug_level >= DEBUG_LEVEL_ISR )
1624 printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
1625 __FILE__,__LINE__,info->device_name,status);
1626
1627 info->pending_bh |= BH_RECEIVE;
1628
1629 if ( status & BIT3 ) {
1630 info->rx_overflow = 1;
1631 info->icount.buf_overrun++;
1632 }
1633
1634} /* end of mgsl_isr_receive_dma() */
1635
1636/* mgsl_isr_transmit_dma()
1637 *
1638 * This function services a transmit DMA channel interrupt.
1639 *
1640 * For this driver there is one source of transmit DMA interrupts
1641 * as identified in the Transmit DMA Mode Register (TDMR):
1642 *
1643 * BIT2 EOB End of Buffer. This interrupt occurs when a
1644 * transmit DMA buffer has been emptied.
1645 *
1646 * The driver maintains enough transmit DMA buffers to hold at least
1647 * one max frame size transmit frame. When operating in a buffered
1648 * transmit mode, there may be enough transmit DMA buffers to hold at
1649 * least two or more max frame size frames. On an EOB condition,
1650 * determine if there are any queued transmit buffers and copy into
1651 * transmit DMA buffers if we have room.
1652 *
1653 * Arguments: info pointer to device instance data
1654 * Return Value: None
1655 */
1656static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
1657{
1658 u16 status;
1659
1660 /* clear interrupt pending and IUS bit for Tx DMA IRQ */
1661 usc_OutDmaReg(info, CDIR, BIT8+BIT0 );
1662
1663 /* Read the transmit DMA status to identify interrupt type. */
1664 /* This also clears the status bits. */
1665
1666 status = usc_InDmaReg( info, TDMR );
1667
1668 if ( debug_level >= DEBUG_LEVEL_ISR )
1669 printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
1670 __FILE__,__LINE__,info->device_name,status);
1671
1672 if ( status & BIT2 ) {
1673 --info->tx_dma_buffers_used;
1674
1675 /* if there are transmit frames queued,
1676 * try to load the next one
1677 */
1678 if ( load_next_tx_holding_buffer(info) ) {
1679 /* if call returns non-zero value, we have
1680 * at least one free tx holding buffer
1681 */
1682 info->pending_bh |= BH_TRANSMIT;
1683 }
1684 }
1685
1686} /* end of mgsl_isr_transmit_dma() */
1687
1688/* mgsl_interrupt()
1689 *
1690 * Interrupt service routine entry point.
1691 *
1692 * Arguments:
1693 *
1694 * irq interrupt number that caused interrupt
1695 * dev_id device ID supplied during interrupt registration
Linus Torvalds1da177e2005-04-16 15:20:36 -07001696 *
1697 * Return Value: None
1698 */
David Howells7d12e782006-10-05 14:55:46 +01001699static irqreturn_t mgsl_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001700{
1701 struct mgsl_struct * info;
1702 u16 UscVector;
1703 u16 DmaVector;
1704
1705 if ( debug_level >= DEBUG_LEVEL_ISR )
1706 printk("%s(%d):mgsl_interrupt(%d)entry.\n",
1707 __FILE__,__LINE__,irq);
1708
1709 info = (struct mgsl_struct *)dev_id;
1710 if (!info)
1711 return IRQ_NONE;
1712
1713 spin_lock(&info->irq_spinlock);
1714
1715 for(;;) {
1716 /* Read the interrupt vectors from hardware. */
1717 UscVector = usc_InReg(info, IVR) >> 9;
1718 DmaVector = usc_InDmaReg(info, DIVR);
1719
1720 if ( debug_level >= DEBUG_LEVEL_ISR )
1721 printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
1722 __FILE__,__LINE__,info->device_name,UscVector,DmaVector);
1723
1724 if ( !UscVector && !DmaVector )
1725 break;
1726
1727 /* Dispatch interrupt vector */
1728 if ( UscVector )
1729 (*UscIsrTable[UscVector])(info);
1730 else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
1731 mgsl_isr_transmit_dma(info);
1732 else
1733 mgsl_isr_receive_dma(info);
1734
1735 if ( info->isr_overflow ) {
1736 printk(KERN_ERR"%s(%d):%s isr overflow irq=%d\n",
1737 __FILE__,__LINE__,info->device_name, irq);
1738 usc_DisableMasterIrqBit(info);
1739 usc_DisableDmaInterrupts(info,DICR_MASTER);
1740 break;
1741 }
1742 }
1743
1744 /* Request bottom half processing if there's something
1745 * for it to do and the bh is not already running
1746 */
1747
1748 if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
1749 if ( debug_level >= DEBUG_LEVEL_ISR )
1750 printk("%s(%d):%s queueing bh task.\n",
1751 __FILE__,__LINE__,info->device_name);
1752 schedule_work(&info->task);
1753 info->bh_requested = 1;
1754 }
1755
1756 spin_unlock(&info->irq_spinlock);
1757
1758 if ( debug_level >= DEBUG_LEVEL_ISR )
1759 printk("%s(%d):mgsl_interrupt(%d)exit.\n",
1760 __FILE__,__LINE__,irq);
1761 return IRQ_HANDLED;
1762} /* end of mgsl_interrupt() */
1763
1764/* startup()
1765 *
1766 * Initialize and start device.
1767 *
1768 * Arguments: info pointer to device instance data
1769 * Return Value: 0 if success, otherwise error code
1770 */
1771static int startup(struct mgsl_struct * info)
1772{
1773 int retval = 0;
1774
1775 if ( debug_level >= DEBUG_LEVEL_INFO )
1776 printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
1777
1778 if (info->flags & ASYNC_INITIALIZED)
1779 return 0;
1780
1781 if (!info->xmit_buf) {
1782 /* allocate a page of memory for a transmit buffer */
1783 info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1784 if (!info->xmit_buf) {
1785 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1786 __FILE__,__LINE__,info->device_name);
1787 return -ENOMEM;
1788 }
1789 }
1790
1791 info->pending_bh = 0;
1792
Paul Fulghum96612392005-09-09 13:02:13 -07001793 memset(&info->icount, 0, sizeof(info->icount));
1794
Jiri Slaby40565f12007-02-12 00:52:31 -08001795 setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001796
1797 /* Allocate and claim adapter resources */
1798 retval = mgsl_claim_resources(info);
1799
1800 /* perform existence check and diagnostics */
1801 if ( !retval )
1802 retval = mgsl_adapter_test(info);
1803
1804 if ( retval ) {
1805 if (capable(CAP_SYS_ADMIN) && info->tty)
1806 set_bit(TTY_IO_ERROR, &info->tty->flags);
1807 mgsl_release_resources(info);
1808 return retval;
1809 }
1810
1811 /* program hardware for current parameters */
1812 mgsl_change_params(info);
1813
1814 if (info->tty)
1815 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1816
1817 info->flags |= ASYNC_INITIALIZED;
1818
1819 return 0;
1820
1821} /* end of startup() */
1822
1823/* shutdown()
1824 *
1825 * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
1826 *
1827 * Arguments: info pointer to device instance data
1828 * Return Value: None
1829 */
1830static void shutdown(struct mgsl_struct * info)
1831{
1832 unsigned long flags;
1833
1834 if (!(info->flags & ASYNC_INITIALIZED))
1835 return;
1836
1837 if (debug_level >= DEBUG_LEVEL_INFO)
1838 printk("%s(%d):mgsl_shutdown(%s)\n",
1839 __FILE__,__LINE__, info->device_name );
1840
1841 /* clear status wait queue because status changes */
1842 /* can't happen after shutting down the hardware */
1843 wake_up_interruptible(&info->status_event_wait_q);
1844 wake_up_interruptible(&info->event_wait_q);
1845
Jiri Slaby40565f12007-02-12 00:52:31 -08001846 del_timer_sync(&info->tx_timer);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001847
1848 if (info->xmit_buf) {
1849 free_page((unsigned long) info->xmit_buf);
1850 info->xmit_buf = NULL;
1851 }
1852
1853 spin_lock_irqsave(&info->irq_spinlock,flags);
1854 usc_DisableMasterIrqBit(info);
1855 usc_stop_receiver(info);
1856 usc_stop_transmitter(info);
1857 usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
1858 TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
1859 usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
1860
1861 /* Disable DMAEN (Port 7, Bit 14) */
1862 /* This disconnects the DMA request signal from the ISA bus */
1863 /* on the ISA adapter. This has no effect for the PCI adapter */
1864 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
1865
1866 /* Disable INTEN (Port 6, Bit12) */
1867 /* This disconnects the IRQ request signal to the ISA bus */
1868 /* on the ISA adapter. This has no effect for the PCI adapter */
1869 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
1870
1871 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
1872 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1873 usc_set_serial_signals(info);
1874 }
1875
1876 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1877
1878 mgsl_release_resources(info);
1879
1880 if (info->tty)
1881 set_bit(TTY_IO_ERROR, &info->tty->flags);
1882
1883 info->flags &= ~ASYNC_INITIALIZED;
1884
1885} /* end of shutdown() */
1886
1887static void mgsl_program_hw(struct mgsl_struct *info)
1888{
1889 unsigned long flags;
1890
1891 spin_lock_irqsave(&info->irq_spinlock,flags);
1892
1893 usc_stop_receiver(info);
1894 usc_stop_transmitter(info);
1895 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1896
1897 if (info->params.mode == MGSL_MODE_HDLC ||
1898 info->params.mode == MGSL_MODE_RAW ||
1899 info->netcount)
1900 usc_set_sync_mode(info);
1901 else
1902 usc_set_async_mode(info);
1903
1904 usc_set_serial_signals(info);
1905
1906 info->dcd_chkcount = 0;
1907 info->cts_chkcount = 0;
1908 info->ri_chkcount = 0;
1909 info->dsr_chkcount = 0;
1910
1911 usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
1912 usc_EnableInterrupts(info, IO_PIN);
1913 usc_get_serial_signals(info);
1914
1915 if (info->netcount || info->tty->termios->c_cflag & CREAD)
1916 usc_start_receiver(info);
1917
1918 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1919}
1920
1921/* Reconfigure adapter based on new parameters
1922 */
1923static void mgsl_change_params(struct mgsl_struct *info)
1924{
1925 unsigned cflag;
1926 int bits_per_char;
1927
1928 if (!info->tty || !info->tty->termios)
1929 return;
1930
1931 if (debug_level >= DEBUG_LEVEL_INFO)
1932 printk("%s(%d):mgsl_change_params(%s)\n",
1933 __FILE__,__LINE__, info->device_name );
1934
1935 cflag = info->tty->termios->c_cflag;
1936
1937 /* if B0 rate (hangup) specified then negate DTR and RTS */
1938 /* otherwise assert DTR and RTS */
1939 if (cflag & CBAUD)
1940 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1941 else
1942 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1943
1944 /* byte size and parity */
1945
1946 switch (cflag & CSIZE) {
1947 case CS5: info->params.data_bits = 5; break;
1948 case CS6: info->params.data_bits = 6; break;
1949 case CS7: info->params.data_bits = 7; break;
1950 case CS8: info->params.data_bits = 8; break;
1951 /* Never happens, but GCC is too dumb to figure it out */
1952 default: info->params.data_bits = 7; break;
1953 }
1954
1955 if (cflag & CSTOPB)
1956 info->params.stop_bits = 2;
1957 else
1958 info->params.stop_bits = 1;
1959
1960 info->params.parity = ASYNC_PARITY_NONE;
1961 if (cflag & PARENB) {
1962 if (cflag & PARODD)
1963 info->params.parity = ASYNC_PARITY_ODD;
1964 else
1965 info->params.parity = ASYNC_PARITY_EVEN;
1966#ifdef CMSPAR
1967 if (cflag & CMSPAR)
1968 info->params.parity = ASYNC_PARITY_SPACE;
1969#endif
1970 }
1971
1972 /* calculate number of jiffies to transmit a full
1973 * FIFO (32 bytes) at specified data rate
1974 */
1975 bits_per_char = info->params.data_bits +
1976 info->params.stop_bits + 1;
1977
1978 /* if port data rate is set to 460800 or less then
1979 * allow tty settings to override, otherwise keep the
1980 * current data rate.
1981 */
1982 if (info->params.data_rate <= 460800)
1983 info->params.data_rate = tty_get_baud_rate(info->tty);
1984
1985 if ( info->params.data_rate ) {
1986 info->timeout = (32*HZ*bits_per_char) /
1987 info->params.data_rate;
1988 }
1989 info->timeout += HZ/50; /* Add .02 seconds of slop */
1990
1991 if (cflag & CRTSCTS)
1992 info->flags |= ASYNC_CTS_FLOW;
1993 else
1994 info->flags &= ~ASYNC_CTS_FLOW;
1995
1996 if (cflag & CLOCAL)
1997 info->flags &= ~ASYNC_CHECK_CD;
1998 else
1999 info->flags |= ASYNC_CHECK_CD;
2000
2001 /* process tty input control flags */
2002
2003 info->read_status_mask = RXSTATUS_OVERRUN;
2004 if (I_INPCK(info->tty))
2005 info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
2006 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2007 info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
2008
2009 if (I_IGNPAR(info->tty))
2010 info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
2011 if (I_IGNBRK(info->tty)) {
2012 info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
2013 /* If ignoring parity and break indicators, ignore
2014 * overruns too. (For real raw support).
2015 */
2016 if (I_IGNPAR(info->tty))
2017 info->ignore_status_mask |= RXSTATUS_OVERRUN;
2018 }
2019
2020 mgsl_program_hw(info);
2021
2022} /* end of mgsl_change_params() */
2023
2024/* mgsl_put_char()
2025 *
2026 * Add a character to the transmit buffer.
2027 *
2028 * Arguments: tty pointer to tty information structure
2029 * ch character to add to transmit buffer
2030 *
2031 * Return Value: None
2032 */
2033static void mgsl_put_char(struct tty_struct *tty, unsigned char ch)
2034{
2035 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2036 unsigned long flags;
2037
2038 if ( debug_level >= DEBUG_LEVEL_INFO ) {
2039 printk( "%s(%d):mgsl_put_char(%d) on %s\n",
2040 __FILE__,__LINE__,ch,info->device_name);
2041 }
2042
2043 if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
2044 return;
2045
2046 if (!tty || !info->xmit_buf)
2047 return;
2048
2049 spin_lock_irqsave(&info->irq_spinlock,flags);
2050
2051 if ( (info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active ) {
2052
2053 if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
2054 info->xmit_buf[info->xmit_head++] = ch;
2055 info->xmit_head &= SERIAL_XMIT_SIZE-1;
2056 info->xmit_cnt++;
2057 }
2058 }
2059
2060 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2061
2062} /* end of mgsl_put_char() */
2063
2064/* mgsl_flush_chars()
2065 *
2066 * Enable transmitter so remaining characters in the
2067 * transmit buffer are sent.
2068 *
2069 * Arguments: tty pointer to tty information structure
2070 * Return Value: None
2071 */
2072static void mgsl_flush_chars(struct tty_struct *tty)
2073{
2074 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2075 unsigned long flags;
2076
2077 if ( debug_level >= DEBUG_LEVEL_INFO )
2078 printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
2079 __FILE__,__LINE__,info->device_name,info->xmit_cnt);
2080
2081 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
2082 return;
2083
2084 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
2085 !info->xmit_buf)
2086 return;
2087
2088 if ( debug_level >= DEBUG_LEVEL_INFO )
2089 printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
2090 __FILE__,__LINE__,info->device_name );
2091
2092 spin_lock_irqsave(&info->irq_spinlock,flags);
2093
2094 if (!info->tx_active) {
2095 if ( (info->params.mode == MGSL_MODE_HDLC ||
2096 info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
2097 /* operating in synchronous (frame oriented) mode */
2098 /* copy data from circular xmit_buf to */
2099 /* transmit DMA buffer. */
2100 mgsl_load_tx_dma_buffer(info,
2101 info->xmit_buf,info->xmit_cnt);
2102 }
2103 usc_start_transmitter(info);
2104 }
2105
2106 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2107
2108} /* end of mgsl_flush_chars() */
2109
2110/* mgsl_write()
2111 *
2112 * Send a block of data
2113 *
2114 * Arguments:
2115 *
2116 * tty pointer to tty information structure
2117 * buf pointer to buffer containing send data
2118 * count size of send data in bytes
2119 *
2120 * Return Value: number of characters written
2121 */
2122static int mgsl_write(struct tty_struct * tty,
2123 const unsigned char *buf, int count)
2124{
2125 int c, ret = 0;
2126 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2127 unsigned long flags;
2128
2129 if ( debug_level >= DEBUG_LEVEL_INFO )
2130 printk( "%s(%d):mgsl_write(%s) count=%d\n",
2131 __FILE__,__LINE__,info->device_name,count);
2132
2133 if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
2134 goto cleanup;
2135
Paul Fulghum86a34142006-03-28 01:56:14 -08002136 if (!tty || !info->xmit_buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002137 goto cleanup;
2138
2139 if ( info->params.mode == MGSL_MODE_HDLC ||
2140 info->params.mode == MGSL_MODE_RAW ) {
2141 /* operating in synchronous (frame oriented) mode */
2142 /* operating in synchronous (frame oriented) mode */
2143 if (info->tx_active) {
2144
2145 if ( info->params.mode == MGSL_MODE_HDLC ) {
2146 ret = 0;
2147 goto cleanup;
2148 }
2149 /* transmitter is actively sending data -
2150 * if we have multiple transmit dma and
2151 * holding buffers, attempt to queue this
2152 * frame for transmission at a later time.
2153 */
2154 if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
2155 /* no tx holding buffers available */
2156 ret = 0;
2157 goto cleanup;
2158 }
2159
2160 /* queue transmit frame request */
2161 ret = count;
2162 save_tx_buffer_request(info,buf,count);
2163
2164 /* if we have sufficient tx dma buffers,
2165 * load the next buffered tx request
2166 */
2167 spin_lock_irqsave(&info->irq_spinlock,flags);
2168 load_next_tx_holding_buffer(info);
2169 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2170 goto cleanup;
2171 }
2172
2173 /* if operating in HDLC LoopMode and the adapter */
2174 /* has yet to be inserted into the loop, we can't */
2175 /* transmit */
2176
2177 if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
2178 !usc_loopmode_active(info) )
2179 {
2180 ret = 0;
2181 goto cleanup;
2182 }
2183
2184 if ( info->xmit_cnt ) {
2185 /* Send accumulated from send_char() calls */
2186 /* as frame and wait before accepting more data. */
2187 ret = 0;
2188
2189 /* copy data from circular xmit_buf to */
2190 /* transmit DMA buffer. */
2191 mgsl_load_tx_dma_buffer(info,
2192 info->xmit_buf,info->xmit_cnt);
2193 if ( debug_level >= DEBUG_LEVEL_INFO )
2194 printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
2195 __FILE__,__LINE__,info->device_name);
2196 } else {
2197 if ( debug_level >= DEBUG_LEVEL_INFO )
2198 printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
2199 __FILE__,__LINE__,info->device_name);
2200 ret = count;
2201 info->xmit_cnt = count;
2202 mgsl_load_tx_dma_buffer(info,buf,count);
2203 }
2204 } else {
2205 while (1) {
2206 spin_lock_irqsave(&info->irq_spinlock,flags);
2207 c = min_t(int, count,
2208 min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
2209 SERIAL_XMIT_SIZE - info->xmit_head));
2210 if (c <= 0) {
2211 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2212 break;
2213 }
2214 memcpy(info->xmit_buf + info->xmit_head, buf, c);
2215 info->xmit_head = ((info->xmit_head + c) &
2216 (SERIAL_XMIT_SIZE-1));
2217 info->xmit_cnt += c;
2218 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2219 buf += c;
2220 count -= c;
2221 ret += c;
2222 }
2223 }
2224
2225 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
2226 spin_lock_irqsave(&info->irq_spinlock,flags);
2227 if (!info->tx_active)
2228 usc_start_transmitter(info);
2229 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2230 }
2231cleanup:
2232 if ( debug_level >= DEBUG_LEVEL_INFO )
2233 printk( "%s(%d):mgsl_write(%s) returning=%d\n",
2234 __FILE__,__LINE__,info->device_name,ret);
2235
2236 return ret;
2237
2238} /* end of mgsl_write() */
2239
2240/* mgsl_write_room()
2241 *
2242 * Return the count of free bytes in transmit buffer
2243 *
2244 * Arguments: tty pointer to tty info structure
2245 * Return Value: None
2246 */
2247static int mgsl_write_room(struct tty_struct *tty)
2248{
2249 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2250 int ret;
2251
2252 if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
2253 return 0;
2254 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
2255 if (ret < 0)
2256 ret = 0;
2257
2258 if (debug_level >= DEBUG_LEVEL_INFO)
2259 printk("%s(%d):mgsl_write_room(%s)=%d\n",
2260 __FILE__,__LINE__, info->device_name,ret );
2261
2262 if ( info->params.mode == MGSL_MODE_HDLC ||
2263 info->params.mode == MGSL_MODE_RAW ) {
2264 /* operating in synchronous (frame oriented) mode */
2265 if ( info->tx_active )
2266 return 0;
2267 else
2268 return HDLC_MAX_FRAME_SIZE;
2269 }
2270
2271 return ret;
2272
2273} /* end of mgsl_write_room() */
2274
2275/* mgsl_chars_in_buffer()
2276 *
2277 * Return the count of bytes in transmit buffer
2278 *
2279 * Arguments: tty pointer to tty info structure
2280 * Return Value: None
2281 */
2282static int mgsl_chars_in_buffer(struct tty_struct *tty)
2283{
2284 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2285
2286 if (debug_level >= DEBUG_LEVEL_INFO)
2287 printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
2288 __FILE__,__LINE__, info->device_name );
2289
2290 if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
2291 return 0;
2292
2293 if (debug_level >= DEBUG_LEVEL_INFO)
2294 printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
2295 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
2296
2297 if ( info->params.mode == MGSL_MODE_HDLC ||
2298 info->params.mode == MGSL_MODE_RAW ) {
2299 /* operating in synchronous (frame oriented) mode */
2300 if ( info->tx_active )
2301 return info->max_frame_size;
2302 else
2303 return 0;
2304 }
2305
2306 return info->xmit_cnt;
2307} /* end of mgsl_chars_in_buffer() */
2308
2309/* mgsl_flush_buffer()
2310 *
2311 * Discard all data in the send buffer
2312 *
2313 * Arguments: tty pointer to tty info structure
2314 * Return Value: None
2315 */
2316static void mgsl_flush_buffer(struct tty_struct *tty)
2317{
2318 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2319 unsigned long flags;
2320
2321 if (debug_level >= DEBUG_LEVEL_INFO)
2322 printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
2323 __FILE__,__LINE__, info->device_name );
2324
2325 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
2326 return;
2327
2328 spin_lock_irqsave(&info->irq_spinlock,flags);
2329 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2330 del_timer(&info->tx_timer);
2331 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2332
Linus Torvalds1da177e2005-04-16 15:20:36 -07002333 tty_wakeup(tty);
2334}
2335
2336/* mgsl_send_xchar()
2337 *
2338 * Send a high-priority XON/XOFF character
2339 *
2340 * Arguments: tty pointer to tty info structure
2341 * ch character to send
2342 * Return Value: None
2343 */
2344static void mgsl_send_xchar(struct tty_struct *tty, char ch)
2345{
2346 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2347 unsigned long flags;
2348
2349 if (debug_level >= DEBUG_LEVEL_INFO)
2350 printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
2351 __FILE__,__LINE__, info->device_name, ch );
2352
2353 if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
2354 return;
2355
2356 info->x_char = ch;
2357 if (ch) {
2358 /* Make sure transmit interrupts are on */
2359 spin_lock_irqsave(&info->irq_spinlock,flags);
2360 if (!info->tx_enabled)
2361 usc_start_transmitter(info);
2362 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2363 }
2364} /* end of mgsl_send_xchar() */
2365
2366/* mgsl_throttle()
2367 *
2368 * Signal remote device to throttle send data (our receive data)
2369 *
2370 * Arguments: tty pointer to tty info structure
2371 * Return Value: None
2372 */
2373static void mgsl_throttle(struct tty_struct * tty)
2374{
2375 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2376 unsigned long flags;
2377
2378 if (debug_level >= DEBUG_LEVEL_INFO)
2379 printk("%s(%d):mgsl_throttle(%s) entry\n",
2380 __FILE__,__LINE__, info->device_name );
2381
2382 if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
2383 return;
2384
2385 if (I_IXOFF(tty))
2386 mgsl_send_xchar(tty, STOP_CHAR(tty));
2387
2388 if (tty->termios->c_cflag & CRTSCTS) {
2389 spin_lock_irqsave(&info->irq_spinlock,flags);
2390 info->serial_signals &= ~SerialSignal_RTS;
2391 usc_set_serial_signals(info);
2392 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2393 }
2394} /* end of mgsl_throttle() */
2395
2396/* mgsl_unthrottle()
2397 *
2398 * Signal remote device to stop throttling send data (our receive data)
2399 *
2400 * Arguments: tty pointer to tty info structure
2401 * Return Value: None
2402 */
2403static void mgsl_unthrottle(struct tty_struct * tty)
2404{
2405 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2406 unsigned long flags;
2407
2408 if (debug_level >= DEBUG_LEVEL_INFO)
2409 printk("%s(%d):mgsl_unthrottle(%s) entry\n",
2410 __FILE__,__LINE__, info->device_name );
2411
2412 if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
2413 return;
2414
2415 if (I_IXOFF(tty)) {
2416 if (info->x_char)
2417 info->x_char = 0;
2418 else
2419 mgsl_send_xchar(tty, START_CHAR(tty));
2420 }
2421
2422 if (tty->termios->c_cflag & CRTSCTS) {
2423 spin_lock_irqsave(&info->irq_spinlock,flags);
2424 info->serial_signals |= SerialSignal_RTS;
2425 usc_set_serial_signals(info);
2426 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2427 }
2428
2429} /* end of mgsl_unthrottle() */
2430
2431/* mgsl_get_stats()
2432 *
2433 * get the current serial parameters information
2434 *
2435 * Arguments: info pointer to device instance data
2436 * user_icount pointer to buffer to hold returned stats
2437 *
2438 * Return Value: 0 if success, otherwise error code
2439 */
2440static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
2441{
2442 int err;
2443
2444 if (debug_level >= DEBUG_LEVEL_INFO)
2445 printk("%s(%d):mgsl_get_params(%s)\n",
2446 __FILE__,__LINE__, info->device_name);
2447
Paul Fulghum96612392005-09-09 13:02:13 -07002448 if (!user_icount) {
2449 memset(&info->icount, 0, sizeof(info->icount));
2450 } else {
2451 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2452 if (err)
2453 return -EFAULT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002454 }
2455
2456 return 0;
2457
2458} /* end of mgsl_get_stats() */
2459
2460/* mgsl_get_params()
2461 *
2462 * get the current serial parameters information
2463 *
2464 * Arguments: info pointer to device instance data
2465 * user_params pointer to buffer to hold returned params
2466 *
2467 * Return Value: 0 if success, otherwise error code
2468 */
2469static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
2470{
2471 int err;
2472 if (debug_level >= DEBUG_LEVEL_INFO)
2473 printk("%s(%d):mgsl_get_params(%s)\n",
2474 __FILE__,__LINE__, info->device_name);
2475
2476 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2477 if (err) {
2478 if ( debug_level >= DEBUG_LEVEL_INFO )
2479 printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
2480 __FILE__,__LINE__,info->device_name);
2481 return -EFAULT;
2482 }
2483
2484 return 0;
2485
2486} /* end of mgsl_get_params() */
2487
2488/* mgsl_set_params()
2489 *
2490 * set the serial parameters
2491 *
2492 * Arguments:
2493 *
2494 * info pointer to device instance data
2495 * new_params user buffer containing new serial params
2496 *
2497 * Return Value: 0 if success, otherwise error code
2498 */
2499static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
2500{
2501 unsigned long flags;
2502 MGSL_PARAMS tmp_params;
2503 int err;
2504
2505 if (debug_level >= DEBUG_LEVEL_INFO)
2506 printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
2507 info->device_name );
2508 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2509 if (err) {
2510 if ( debug_level >= DEBUG_LEVEL_INFO )
2511 printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
2512 __FILE__,__LINE__,info->device_name);
2513 return -EFAULT;
2514 }
2515
2516 spin_lock_irqsave(&info->irq_spinlock,flags);
2517 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2518 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2519
2520 mgsl_change_params(info);
2521
2522 return 0;
2523
2524} /* end of mgsl_set_params() */
2525
2526/* mgsl_get_txidle()
2527 *
2528 * get the current transmit idle mode
2529 *
2530 * Arguments: info pointer to device instance data
2531 * idle_mode pointer to buffer to hold returned idle mode
2532 *
2533 * Return Value: 0 if success, otherwise error code
2534 */
2535static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
2536{
2537 int err;
2538
2539 if (debug_level >= DEBUG_LEVEL_INFO)
2540 printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
2541 __FILE__,__LINE__, info->device_name, info->idle_mode);
2542
2543 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2544 if (err) {
2545 if ( debug_level >= DEBUG_LEVEL_INFO )
2546 printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
2547 __FILE__,__LINE__,info->device_name);
2548 return -EFAULT;
2549 }
2550
2551 return 0;
2552
2553} /* end of mgsl_get_txidle() */
2554
2555/* mgsl_set_txidle() service ioctl to set transmit idle mode
2556 *
2557 * Arguments: info pointer to device instance data
2558 * idle_mode new idle mode
2559 *
2560 * Return Value: 0 if success, otherwise error code
2561 */
2562static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
2563{
2564 unsigned long flags;
2565
2566 if (debug_level >= DEBUG_LEVEL_INFO)
2567 printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
2568 info->device_name, idle_mode );
2569
2570 spin_lock_irqsave(&info->irq_spinlock,flags);
2571 info->idle_mode = idle_mode;
2572 usc_set_txidle( info );
2573 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2574 return 0;
2575
2576} /* end of mgsl_set_txidle() */
2577
2578/* mgsl_txenable()
2579 *
2580 * enable or disable the transmitter
2581 *
2582 * Arguments:
2583 *
2584 * info pointer to device instance data
2585 * enable 1 = enable, 0 = disable
2586 *
2587 * Return Value: 0 if success, otherwise error code
2588 */
2589static int mgsl_txenable(struct mgsl_struct * info, int enable)
2590{
2591 unsigned long flags;
2592
2593 if (debug_level >= DEBUG_LEVEL_INFO)
2594 printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
2595 info->device_name, enable);
2596
2597 spin_lock_irqsave(&info->irq_spinlock,flags);
2598 if ( enable ) {
2599 if ( !info->tx_enabled ) {
2600
2601 usc_start_transmitter(info);
2602 /*--------------------------------------------------
2603 * if HDLC/SDLC Loop mode, attempt to insert the
2604 * station in the 'loop' by setting CMR:13. Upon
2605 * receipt of the next GoAhead (RxAbort) sequence,
2606 * the OnLoop indicator (CCSR:7) should go active
2607 * to indicate that we are on the loop
2608 *--------------------------------------------------*/
2609 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2610 usc_loopmode_insert_request( info );
2611 }
2612 } else {
2613 if ( info->tx_enabled )
2614 usc_stop_transmitter(info);
2615 }
2616 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2617 return 0;
2618
2619} /* end of mgsl_txenable() */
2620
2621/* mgsl_txabort() abort send HDLC frame
2622 *
2623 * Arguments: info pointer to device instance data
2624 * Return Value: 0 if success, otherwise error code
2625 */
2626static int mgsl_txabort(struct mgsl_struct * info)
2627{
2628 unsigned long flags;
2629
2630 if (debug_level >= DEBUG_LEVEL_INFO)
2631 printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
2632 info->device_name);
2633
2634 spin_lock_irqsave(&info->irq_spinlock,flags);
2635 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
2636 {
2637 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2638 usc_loopmode_cancel_transmit( info );
2639 else
2640 usc_TCmd(info,TCmd_SendAbort);
2641 }
2642 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2643 return 0;
2644
2645} /* end of mgsl_txabort() */
2646
2647/* mgsl_rxenable() enable or disable the receiver
2648 *
2649 * Arguments: info pointer to device instance data
2650 * enable 1 = enable, 0 = disable
2651 * Return Value: 0 if success, otherwise error code
2652 */
2653static int mgsl_rxenable(struct mgsl_struct * info, int enable)
2654{
2655 unsigned long flags;
2656
2657 if (debug_level >= DEBUG_LEVEL_INFO)
2658 printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
2659 info->device_name, enable);
2660
2661 spin_lock_irqsave(&info->irq_spinlock,flags);
2662 if ( enable ) {
2663 if ( !info->rx_enabled )
2664 usc_start_receiver(info);
2665 } else {
2666 if ( info->rx_enabled )
2667 usc_stop_receiver(info);
2668 }
2669 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2670 return 0;
2671
2672} /* end of mgsl_rxenable() */
2673
2674/* mgsl_wait_event() wait for specified event to occur
2675 *
2676 * Arguments: info pointer to device instance data
2677 * mask pointer to bitmask of events to wait for
2678 * Return Value: 0 if successful and bit mask updated with
2679 * of events triggerred,
2680 * otherwise error code
2681 */
2682static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
2683{
2684 unsigned long flags;
2685 int s;
2686 int rc=0;
2687 struct mgsl_icount cprev, cnow;
2688 int events;
2689 int mask;
2690 struct _input_signal_events oldsigs, newsigs;
2691 DECLARE_WAITQUEUE(wait, current);
2692
2693 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2694 if (rc) {
2695 return -EFAULT;
2696 }
2697
2698 if (debug_level >= DEBUG_LEVEL_INFO)
2699 printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
2700 info->device_name, mask);
2701
2702 spin_lock_irqsave(&info->irq_spinlock,flags);
2703
2704 /* return immediately if state matches requested events */
2705 usc_get_serial_signals(info);
2706 s = info->serial_signals;
2707 events = mask &
2708 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2709 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2710 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2711 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2712 if (events) {
2713 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2714 goto exit;
2715 }
2716
2717 /* save current irq counts */
2718 cprev = info->icount;
2719 oldsigs = info->input_signal_events;
2720
2721 /* enable hunt and idle irqs if needed */
2722 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2723 u16 oldreg = usc_InReg(info,RICR);
2724 u16 newreg = oldreg +
2725 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
2726 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
2727 if (oldreg != newreg)
2728 usc_OutReg(info, RICR, newreg);
2729 }
2730
2731 set_current_state(TASK_INTERRUPTIBLE);
2732 add_wait_queue(&info->event_wait_q, &wait);
2733
2734 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2735
2736
2737 for(;;) {
2738 schedule();
2739 if (signal_pending(current)) {
2740 rc = -ERESTARTSYS;
2741 break;
2742 }
2743
2744 /* get current irq counts */
2745 spin_lock_irqsave(&info->irq_spinlock,flags);
2746 cnow = info->icount;
2747 newsigs = info->input_signal_events;
2748 set_current_state(TASK_INTERRUPTIBLE);
2749 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2750
2751 /* if no change, wait aborted for some reason */
2752 if (newsigs.dsr_up == oldsigs.dsr_up &&
2753 newsigs.dsr_down == oldsigs.dsr_down &&
2754 newsigs.dcd_up == oldsigs.dcd_up &&
2755 newsigs.dcd_down == oldsigs.dcd_down &&
2756 newsigs.cts_up == oldsigs.cts_up &&
2757 newsigs.cts_down == oldsigs.cts_down &&
2758 newsigs.ri_up == oldsigs.ri_up &&
2759 newsigs.ri_down == oldsigs.ri_down &&
2760 cnow.exithunt == cprev.exithunt &&
2761 cnow.rxidle == cprev.rxidle) {
2762 rc = -EIO;
2763 break;
2764 }
2765
2766 events = mask &
2767 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2768 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2769 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2770 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2771 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2772 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2773 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2774 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2775 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2776 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2777 if (events)
2778 break;
2779
2780 cprev = cnow;
2781 oldsigs = newsigs;
2782 }
2783
2784 remove_wait_queue(&info->event_wait_q, &wait);
2785 set_current_state(TASK_RUNNING);
2786
2787 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2788 spin_lock_irqsave(&info->irq_spinlock,flags);
2789 if (!waitqueue_active(&info->event_wait_q)) {
2790 /* disable enable exit hunt mode/idle rcvd IRQs */
2791 usc_OutReg(info, RICR, usc_InReg(info,RICR) &
2792 ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED));
2793 }
2794 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2795 }
2796exit:
2797 if ( rc == 0 )
2798 PUT_USER(rc, events, mask_ptr);
2799
2800 return rc;
2801
2802} /* end of mgsl_wait_event() */
2803
2804static int modem_input_wait(struct mgsl_struct *info,int arg)
2805{
2806 unsigned long flags;
2807 int rc;
2808 struct mgsl_icount cprev, cnow;
2809 DECLARE_WAITQUEUE(wait, current);
2810
2811 /* save current irq counts */
2812 spin_lock_irqsave(&info->irq_spinlock,flags);
2813 cprev = info->icount;
2814 add_wait_queue(&info->status_event_wait_q, &wait);
2815 set_current_state(TASK_INTERRUPTIBLE);
2816 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2817
2818 for(;;) {
2819 schedule();
2820 if (signal_pending(current)) {
2821 rc = -ERESTARTSYS;
2822 break;
2823 }
2824
2825 /* get new irq counts */
2826 spin_lock_irqsave(&info->irq_spinlock,flags);
2827 cnow = info->icount;
2828 set_current_state(TASK_INTERRUPTIBLE);
2829 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2830
2831 /* if no change, wait aborted for some reason */
2832 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2833 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2834 rc = -EIO;
2835 break;
2836 }
2837
2838 /* check for change in caller specified modem input */
2839 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2840 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2841 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2842 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2843 rc = 0;
2844 break;
2845 }
2846
2847 cprev = cnow;
2848 }
2849 remove_wait_queue(&info->status_event_wait_q, &wait);
2850 set_current_state(TASK_RUNNING);
2851 return rc;
2852}
2853
2854/* return the state of the serial control and status signals
2855 */
2856static int tiocmget(struct tty_struct *tty, struct file *file)
2857{
2858 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2859 unsigned int result;
2860 unsigned long flags;
2861
2862 spin_lock_irqsave(&info->irq_spinlock,flags);
2863 usc_get_serial_signals(info);
2864 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2865
2866 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2867 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2868 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2869 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2870 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2871 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2872
2873 if (debug_level >= DEBUG_LEVEL_INFO)
2874 printk("%s(%d):%s tiocmget() value=%08X\n",
2875 __FILE__,__LINE__, info->device_name, result );
2876 return result;
2877}
2878
2879/* set modem control signals (DTR/RTS)
2880 */
2881static int tiocmset(struct tty_struct *tty, struct file *file,
2882 unsigned int set, unsigned int clear)
2883{
2884 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2885 unsigned long flags;
2886
2887 if (debug_level >= DEBUG_LEVEL_INFO)
2888 printk("%s(%d):%s tiocmset(%x,%x)\n",
2889 __FILE__,__LINE__,info->device_name, set, clear);
2890
2891 if (set & TIOCM_RTS)
2892 info->serial_signals |= SerialSignal_RTS;
2893 if (set & TIOCM_DTR)
2894 info->serial_signals |= SerialSignal_DTR;
2895 if (clear & TIOCM_RTS)
2896 info->serial_signals &= ~SerialSignal_RTS;
2897 if (clear & TIOCM_DTR)
2898 info->serial_signals &= ~SerialSignal_DTR;
2899
2900 spin_lock_irqsave(&info->irq_spinlock,flags);
2901 usc_set_serial_signals(info);
2902 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2903
2904 return 0;
2905}
2906
2907/* mgsl_break() Set or clear transmit break condition
2908 *
2909 * Arguments: tty pointer to tty instance data
2910 * break_state -1=set break condition, 0=clear
2911 * Return Value: None
2912 */
2913static void mgsl_break(struct tty_struct *tty, int break_state)
2914{
2915 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
2916 unsigned long flags;
2917
2918 if (debug_level >= DEBUG_LEVEL_INFO)
2919 printk("%s(%d):mgsl_break(%s,%d)\n",
2920 __FILE__,__LINE__, info->device_name, break_state);
2921
2922 if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
2923 return;
2924
2925 spin_lock_irqsave(&info->irq_spinlock,flags);
2926 if (break_state == -1)
2927 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
2928 else
2929 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
2930 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2931
2932} /* end of mgsl_break() */
2933
2934/* mgsl_ioctl() Service an IOCTL request
2935 *
2936 * Arguments:
2937 *
2938 * tty pointer to tty instance data
2939 * file pointer to associated file object for device
2940 * cmd IOCTL command code
2941 * arg command argument/context
2942 *
2943 * Return Value: 0 if success, otherwise error code
2944 */
2945static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
2946 unsigned int cmd, unsigned long arg)
2947{
2948 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
2949
2950 if (debug_level >= DEBUG_LEVEL_INFO)
2951 printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2952 info->device_name, cmd );
2953
2954 if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
2955 return -ENODEV;
2956
2957 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2958 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
2959 if (tty->flags & (1 << TTY_IO_ERROR))
2960 return -EIO;
2961 }
2962
2963 return mgsl_ioctl_common(info, cmd, arg);
2964}
2965
2966static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
2967{
2968 int error;
2969 struct mgsl_icount cnow; /* kernel counter temps */
2970 void __user *argp = (void __user *)arg;
2971 struct serial_icounter_struct __user *p_cuser; /* user space */
2972 unsigned long flags;
2973
2974 switch (cmd) {
2975 case MGSL_IOCGPARAMS:
2976 return mgsl_get_params(info, argp);
2977 case MGSL_IOCSPARAMS:
2978 return mgsl_set_params(info, argp);
2979 case MGSL_IOCGTXIDLE:
2980 return mgsl_get_txidle(info, argp);
2981 case MGSL_IOCSTXIDLE:
2982 return mgsl_set_txidle(info,(int)arg);
2983 case MGSL_IOCTXENABLE:
2984 return mgsl_txenable(info,(int)arg);
2985 case MGSL_IOCRXENABLE:
2986 return mgsl_rxenable(info,(int)arg);
2987 case MGSL_IOCTXABORT:
2988 return mgsl_txabort(info);
2989 case MGSL_IOCGSTATS:
2990 return mgsl_get_stats(info, argp);
2991 case MGSL_IOCWAITEVENT:
2992 return mgsl_wait_event(info, argp);
2993 case MGSL_IOCLOOPTXDONE:
2994 return mgsl_loopmode_send_done(info);
2995 /* Wait for modem input (DCD,RI,DSR,CTS) change
2996 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
2997 */
2998 case TIOCMIWAIT:
2999 return modem_input_wait(info,(int)arg);
3000
3001 /*
3002 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
3003 * Return: write counters to the user passed counter struct
3004 * NB: both 1->0 and 0->1 transitions are counted except for
3005 * RI where only 0->1 is counted.
3006 */
3007 case TIOCGICOUNT:
3008 spin_lock_irqsave(&info->irq_spinlock,flags);
3009 cnow = info->icount;
3010 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3011 p_cuser = argp;
3012 PUT_USER(error,cnow.cts, &p_cuser->cts);
3013 if (error) return error;
3014 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
3015 if (error) return error;
3016 PUT_USER(error,cnow.rng, &p_cuser->rng);
3017 if (error) return error;
3018 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
3019 if (error) return error;
3020 PUT_USER(error,cnow.rx, &p_cuser->rx);
3021 if (error) return error;
3022 PUT_USER(error,cnow.tx, &p_cuser->tx);
3023 if (error) return error;
3024 PUT_USER(error,cnow.frame, &p_cuser->frame);
3025 if (error) return error;
3026 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
3027 if (error) return error;
3028 PUT_USER(error,cnow.parity, &p_cuser->parity);
3029 if (error) return error;
3030 PUT_USER(error,cnow.brk, &p_cuser->brk);
3031 if (error) return error;
3032 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
3033 if (error) return error;
3034 return 0;
3035 default:
3036 return -ENOIOCTLCMD;
3037 }
3038 return 0;
3039}
3040
3041/* mgsl_set_termios()
3042 *
3043 * Set new termios settings
3044 *
3045 * Arguments:
3046 *
3047 * tty pointer to tty structure
3048 * termios pointer to buffer to hold returned old termios
3049 *
3050 * Return Value: None
3051 */
Alan Cox606d0992006-12-08 02:38:45 -08003052static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003053{
3054 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
3055 unsigned long flags;
3056
3057 if (debug_level >= DEBUG_LEVEL_INFO)
3058 printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
3059 tty->driver->name );
3060
Linus Torvalds1da177e2005-04-16 15:20:36 -07003061 mgsl_change_params(info);
3062
3063 /* Handle transition to B0 status */
3064 if (old_termios->c_cflag & CBAUD &&
3065 !(tty->termios->c_cflag & CBAUD)) {
3066 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3067 spin_lock_irqsave(&info->irq_spinlock,flags);
3068 usc_set_serial_signals(info);
3069 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3070 }
3071
3072 /* Handle transition away from B0 status */
3073 if (!(old_termios->c_cflag & CBAUD) &&
3074 tty->termios->c_cflag & CBAUD) {
3075 info->serial_signals |= SerialSignal_DTR;
3076 if (!(tty->termios->c_cflag & CRTSCTS) ||
3077 !test_bit(TTY_THROTTLED, &tty->flags)) {
3078 info->serial_signals |= SerialSignal_RTS;
3079 }
3080 spin_lock_irqsave(&info->irq_spinlock,flags);
3081 usc_set_serial_signals(info);
3082 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3083 }
3084
3085 /* Handle turning off CRTSCTS */
3086 if (old_termios->c_cflag & CRTSCTS &&
3087 !(tty->termios->c_cflag & CRTSCTS)) {
3088 tty->hw_stopped = 0;
3089 mgsl_start(tty);
3090 }
3091
3092} /* end of mgsl_set_termios() */
3093
3094/* mgsl_close()
3095 *
3096 * Called when port is closed. Wait for remaining data to be
3097 * sent. Disable port and free resources.
3098 *
3099 * Arguments:
3100 *
3101 * tty pointer to open tty structure
3102 * filp pointer to open file object
3103 *
3104 * Return Value: None
3105 */
3106static void mgsl_close(struct tty_struct *tty, struct file * filp)
3107{
3108 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
3109
3110 if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
3111 return;
3112
3113 if (debug_level >= DEBUG_LEVEL_INFO)
3114 printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
3115 __FILE__,__LINE__, info->device_name, info->count);
3116
3117 if (!info->count)
3118 return;
3119
3120 if (tty_hung_up_p(filp))
3121 goto cleanup;
3122
3123 if ((tty->count == 1) && (info->count != 1)) {
3124 /*
3125 * tty->count is 1 and the tty structure will be freed.
3126 * info->count should be one in this case.
3127 * if it's not, correct it so that the port is shutdown.
3128 */
3129 printk("mgsl_close: bad refcount; tty->count is 1, "
3130 "info->count is %d\n", info->count);
3131 info->count = 1;
3132 }
3133
3134 info->count--;
3135
3136 /* if at least one open remaining, leave hardware active */
3137 if (info->count)
3138 goto cleanup;
3139
3140 info->flags |= ASYNC_CLOSING;
3141
3142 /* set tty->closing to notify line discipline to
3143 * only process XON/XOFF characters. Only the N_TTY
3144 * discipline appears to use this (ppp does not).
3145 */
3146 tty->closing = 1;
3147
3148 /* wait for transmit data to clear all layers */
3149
3150 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
3151 if (debug_level >= DEBUG_LEVEL_INFO)
3152 printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n",
3153 __FILE__,__LINE__, info->device_name );
3154 tty_wait_until_sent(tty, info->closing_wait);
3155 }
3156
3157 if (info->flags & ASYNC_INITIALIZED)
3158 mgsl_wait_until_sent(tty, info->timeout);
3159
3160 if (tty->driver->flush_buffer)
3161 tty->driver->flush_buffer(tty);
3162
3163 tty_ldisc_flush(tty);
3164
3165 shutdown(info);
3166
3167 tty->closing = 0;
3168 info->tty = NULL;
3169
3170 if (info->blocked_open) {
3171 if (info->close_delay) {
3172 msleep_interruptible(jiffies_to_msecs(info->close_delay));
3173 }
3174 wake_up_interruptible(&info->open_wait);
3175 }
3176
3177 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
3178
3179 wake_up_interruptible(&info->close_wait);
3180
3181cleanup:
3182 if (debug_level >= DEBUG_LEVEL_INFO)
3183 printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
3184 tty->driver->name, info->count);
3185
3186} /* end of mgsl_close() */
3187
3188/* mgsl_wait_until_sent()
3189 *
3190 * Wait until the transmitter is empty.
3191 *
3192 * Arguments:
3193 *
3194 * tty pointer to tty info structure
3195 * timeout time to wait for send completion
3196 *
3197 * Return Value: None
3198 */
3199static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
3200{
3201 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
3202 unsigned long orig_jiffies, char_time;
3203
3204 if (!info )
3205 return;
3206
3207 if (debug_level >= DEBUG_LEVEL_INFO)
3208 printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
3209 __FILE__,__LINE__, info->device_name );
3210
3211 if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
3212 return;
3213
3214 if (!(info->flags & ASYNC_INITIALIZED))
3215 goto exit;
3216
3217 orig_jiffies = jiffies;
3218
3219 /* Set check interval to 1/5 of estimated time to
3220 * send a character, and make it at least 1. The check
3221 * interval should also be less than the timeout.
3222 * Note: use tight timings here to satisfy the NIST-PCTS.
3223 */
3224
3225 if ( info->params.data_rate ) {
3226 char_time = info->timeout/(32 * 5);
3227 if (!char_time)
3228 char_time++;
3229 } else
3230 char_time = 1;
3231
3232 if (timeout)
3233 char_time = min_t(unsigned long, char_time, timeout);
3234
3235 if ( info->params.mode == MGSL_MODE_HDLC ||
3236 info->params.mode == MGSL_MODE_RAW ) {
3237 while (info->tx_active) {
3238 msleep_interruptible(jiffies_to_msecs(char_time));
3239 if (signal_pending(current))
3240 break;
3241 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3242 break;
3243 }
3244 } else {
3245 while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
3246 info->tx_enabled) {
3247 msleep_interruptible(jiffies_to_msecs(char_time));
3248 if (signal_pending(current))
3249 break;
3250 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3251 break;
3252 }
3253 }
3254
3255exit:
3256 if (debug_level >= DEBUG_LEVEL_INFO)
3257 printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
3258 __FILE__,__LINE__, info->device_name );
3259
3260} /* end of mgsl_wait_until_sent() */
3261
3262/* mgsl_hangup()
3263 *
3264 * Called by tty_hangup() when a hangup is signaled.
3265 * This is the same as to closing all open files for the port.
3266 *
3267 * Arguments: tty pointer to associated tty object
3268 * Return Value: None
3269 */
3270static void mgsl_hangup(struct tty_struct *tty)
3271{
3272 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
3273
3274 if (debug_level >= DEBUG_LEVEL_INFO)
3275 printk("%s(%d):mgsl_hangup(%s)\n",
3276 __FILE__,__LINE__, info->device_name );
3277
3278 if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
3279 return;
3280
3281 mgsl_flush_buffer(tty);
3282 shutdown(info);
3283
3284 info->count = 0;
3285 info->flags &= ~ASYNC_NORMAL_ACTIVE;
3286 info->tty = NULL;
3287
3288 wake_up_interruptible(&info->open_wait);
3289
3290} /* end of mgsl_hangup() */
3291
3292/* block_til_ready()
3293 *
3294 * Block the current process until the specified port
3295 * is ready to be opened.
3296 *
3297 * Arguments:
3298 *
3299 * tty pointer to tty info structure
3300 * filp pointer to open file object
3301 * info pointer to device instance data
3302 *
3303 * Return Value: 0 if success, otherwise error code
3304 */
3305static int block_til_ready(struct tty_struct *tty, struct file * filp,
3306 struct mgsl_struct *info)
3307{
3308 DECLARE_WAITQUEUE(wait, current);
3309 int retval;
3310 int do_clocal = 0, extra_count = 0;
3311 unsigned long flags;
3312
3313 if (debug_level >= DEBUG_LEVEL_INFO)
3314 printk("%s(%d):block_til_ready on %s\n",
3315 __FILE__,__LINE__, tty->driver->name );
3316
3317 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3318 /* nonblock mode is set or port is not enabled */
3319 info->flags |= ASYNC_NORMAL_ACTIVE;
3320 return 0;
3321 }
3322
3323 if (tty->termios->c_cflag & CLOCAL)
3324 do_clocal = 1;
3325
3326 /* Wait for carrier detect and the line to become
3327 * free (i.e., not in use by the callout). While we are in
3328 * this loop, info->count is dropped by one, so that
3329 * mgsl_close() knows when to free things. We restore it upon
3330 * exit, either normal or abnormal.
3331 */
3332
3333 retval = 0;
3334 add_wait_queue(&info->open_wait, &wait);
3335
3336 if (debug_level >= DEBUG_LEVEL_INFO)
3337 printk("%s(%d):block_til_ready before block on %s count=%d\n",
3338 __FILE__,__LINE__, tty->driver->name, info->count );
3339
3340 spin_lock_irqsave(&info->irq_spinlock, flags);
3341 if (!tty_hung_up_p(filp)) {
3342 extra_count = 1;
3343 info->count--;
3344 }
3345 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3346 info->blocked_open++;
3347
3348 while (1) {
3349 if (tty->termios->c_cflag & CBAUD) {
3350 spin_lock_irqsave(&info->irq_spinlock,flags);
3351 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3352 usc_set_serial_signals(info);
3353 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3354 }
3355
3356 set_current_state(TASK_INTERRUPTIBLE);
3357
3358 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3359 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3360 -EAGAIN : -ERESTARTSYS;
3361 break;
3362 }
3363
3364 spin_lock_irqsave(&info->irq_spinlock,flags);
3365 usc_get_serial_signals(info);
3366 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3367
3368 if (!(info->flags & ASYNC_CLOSING) &&
3369 (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
3370 break;
3371 }
3372
3373 if (signal_pending(current)) {
3374 retval = -ERESTARTSYS;
3375 break;
3376 }
3377
3378 if (debug_level >= DEBUG_LEVEL_INFO)
3379 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
3380 __FILE__,__LINE__, tty->driver->name, info->count );
3381
3382 schedule();
3383 }
3384
3385 set_current_state(TASK_RUNNING);
3386 remove_wait_queue(&info->open_wait, &wait);
3387
3388 if (extra_count)
3389 info->count++;
3390 info->blocked_open--;
3391
3392 if (debug_level >= DEBUG_LEVEL_INFO)
3393 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
3394 __FILE__,__LINE__, tty->driver->name, info->count );
3395
3396 if (!retval)
3397 info->flags |= ASYNC_NORMAL_ACTIVE;
3398
3399 return retval;
3400
3401} /* end of block_til_ready() */
3402
3403/* mgsl_open()
3404 *
3405 * Called when a port is opened. Init and enable port.
3406 * Perform serial-specific initialization for the tty structure.
3407 *
3408 * Arguments: tty pointer to tty info structure
3409 * filp associated file pointer
3410 *
3411 * Return Value: 0 if success, otherwise error code
3412 */
3413static int mgsl_open(struct tty_struct *tty, struct file * filp)
3414{
3415 struct mgsl_struct *info;
3416 int retval, line;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003417 unsigned long flags;
3418
3419 /* verify range of specified line number */
3420 line = tty->index;
3421 if ((line < 0) || (line >= mgsl_device_count)) {
3422 printk("%s(%d):mgsl_open with invalid line #%d.\n",
3423 __FILE__,__LINE__,line);
3424 return -ENODEV;
3425 }
3426
3427 /* find the info structure for the specified line */
3428 info = mgsl_device_list;
3429 while(info && info->line != line)
3430 info = info->next_device;
3431 if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
3432 return -ENODEV;
3433
3434 tty->driver_data = info;
3435 info->tty = tty;
3436
3437 if (debug_level >= DEBUG_LEVEL_INFO)
3438 printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
3439 __FILE__,__LINE__,tty->driver->name, info->count);
3440
3441 /* If port is closing, signal caller to try again */
3442 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
3443 if (info->flags & ASYNC_CLOSING)
3444 interruptible_sleep_on(&info->close_wait);
3445 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
3446 -EAGAIN : -ERESTARTSYS);
3447 goto cleanup;
3448 }
3449
Linus Torvalds1da177e2005-04-16 15:20:36 -07003450 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
3451
3452 spin_lock_irqsave(&info->netlock, flags);
3453 if (info->netcount) {
3454 retval = -EBUSY;
3455 spin_unlock_irqrestore(&info->netlock, flags);
3456 goto cleanup;
3457 }
3458 info->count++;
3459 spin_unlock_irqrestore(&info->netlock, flags);
3460
3461 if (info->count == 1) {
3462 /* 1st open on this device, init hardware */
3463 retval = startup(info);
3464 if (retval < 0)
3465 goto cleanup;
3466 }
3467
3468 retval = block_til_ready(tty, filp, info);
3469 if (retval) {
3470 if (debug_level >= DEBUG_LEVEL_INFO)
3471 printk("%s(%d):block_til_ready(%s) returned %d\n",
3472 __FILE__,__LINE__, info->device_name, retval);
3473 goto cleanup;
3474 }
3475
3476 if (debug_level >= DEBUG_LEVEL_INFO)
3477 printk("%s(%d):mgsl_open(%s) success\n",
3478 __FILE__,__LINE__, info->device_name);
3479 retval = 0;
3480
3481cleanup:
3482 if (retval) {
3483 if (tty->count == 1)
3484 info->tty = NULL; /* tty layer will release tty struct */
3485 if(info->count)
3486 info->count--;
3487 }
3488
3489 return retval;
3490
3491} /* end of mgsl_open() */
3492
3493/*
3494 * /proc fs routines....
3495 */
3496
3497static inline int line_info(char *buf, struct mgsl_struct *info)
3498{
3499 char stat_buf[30];
3500 int ret;
3501 unsigned long flags;
3502
3503 if (info->bus_type == MGSL_BUS_TYPE_PCI) {
3504 ret = sprintf(buf, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
3505 info->device_name, info->io_base, info->irq_level,
3506 info->phys_memory_base, info->phys_lcr_base);
3507 } else {
3508 ret = sprintf(buf, "%s:(E)ISA io:%04X irq:%d dma:%d",
3509 info->device_name, info->io_base,
3510 info->irq_level, info->dma_level);
3511 }
3512
3513 /* output current serial signal states */
3514 spin_lock_irqsave(&info->irq_spinlock,flags);
3515 usc_get_serial_signals(info);
3516 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3517
3518 stat_buf[0] = 0;
3519 stat_buf[1] = 0;
3520 if (info->serial_signals & SerialSignal_RTS)
3521 strcat(stat_buf, "|RTS");
3522 if (info->serial_signals & SerialSignal_CTS)
3523 strcat(stat_buf, "|CTS");
3524 if (info->serial_signals & SerialSignal_DTR)
3525 strcat(stat_buf, "|DTR");
3526 if (info->serial_signals & SerialSignal_DSR)
3527 strcat(stat_buf, "|DSR");
3528 if (info->serial_signals & SerialSignal_DCD)
3529 strcat(stat_buf, "|CD");
3530 if (info->serial_signals & SerialSignal_RI)
3531 strcat(stat_buf, "|RI");
3532
3533 if (info->params.mode == MGSL_MODE_HDLC ||
3534 info->params.mode == MGSL_MODE_RAW ) {
3535 ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d",
3536 info->icount.txok, info->icount.rxok);
3537 if (info->icount.txunder)
3538 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
3539 if (info->icount.txabort)
3540 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
3541 if (info->icount.rxshort)
3542 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
3543 if (info->icount.rxlong)
3544 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
3545 if (info->icount.rxover)
3546 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
3547 if (info->icount.rxcrc)
3548 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
3549 } else {
3550 ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d",
3551 info->icount.tx, info->icount.rx);
3552 if (info->icount.frame)
3553 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
3554 if (info->icount.parity)
3555 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
3556 if (info->icount.brk)
3557 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
3558 if (info->icount.overrun)
3559 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
3560 }
3561
3562 /* Append serial signal status to end */
3563 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
3564
3565 ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
3566 info->tx_active,info->bh_requested,info->bh_running,
3567 info->pending_bh);
3568
3569 spin_lock_irqsave(&info->irq_spinlock,flags);
3570 {
3571 u16 Tcsr = usc_InReg( info, TCSR );
3572 u16 Tdmr = usc_InDmaReg( info, TDMR );
3573 u16 Ticr = usc_InReg( info, TICR );
3574 u16 Rscr = usc_InReg( info, RCSR );
3575 u16 Rdmr = usc_InDmaReg( info, RDMR );
3576 u16 Ricr = usc_InReg( info, RICR );
3577 u16 Icr = usc_InReg( info, ICR );
3578 u16 Dccr = usc_InReg( info, DCCR );
3579 u16 Tmr = usc_InReg( info, TMR );
3580 u16 Tccr = usc_InReg( info, TCCR );
3581 u16 Ccar = inw( info->io_base + CCAR );
3582 ret += sprintf(buf+ret, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
3583 "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
3584 Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
3585 }
3586 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3587
3588 return ret;
3589
3590} /* end of line_info() */
3591
3592/* mgsl_read_proc()
3593 *
3594 * Called to print information about devices
3595 *
3596 * Arguments:
3597 * page page of memory to hold returned info
3598 * start
3599 * off
3600 * count
3601 * eof
3602 * data
3603 *
3604 * Return Value:
3605 */
3606static int mgsl_read_proc(char *page, char **start, off_t off, int count,
3607 int *eof, void *data)
3608{
3609 int len = 0, l;
3610 off_t begin = 0;
3611 struct mgsl_struct *info;
3612
3613 len += sprintf(page, "synclink driver:%s\n", driver_version);
3614
3615 info = mgsl_device_list;
3616 while( info ) {
3617 l = line_info(page + len, info);
3618 len += l;
3619 if (len+begin > off+count)
3620 goto done;
3621 if (len+begin < off) {
3622 begin += len;
3623 len = 0;
3624 }
3625 info = info->next_device;
3626 }
3627
3628 *eof = 1;
3629done:
3630 if (off >= len+begin)
3631 return 0;
3632 *start = page + (off-begin);
3633 return ((count < begin+len-off) ? count : begin+len-off);
3634
3635} /* end of mgsl_read_proc() */
3636
3637/* mgsl_allocate_dma_buffers()
3638 *
3639 * Allocate and format DMA buffers (ISA adapter)
3640 * or format shared memory buffers (PCI adapter).
3641 *
3642 * Arguments: info pointer to device instance data
3643 * Return Value: 0 if success, otherwise error
3644 */
3645static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
3646{
3647 unsigned short BuffersPerFrame;
3648
3649 info->last_mem_alloc = 0;
3650
3651 /* Calculate the number of DMA buffers necessary to hold the */
3652 /* largest allowable frame size. Note: If the max frame size is */
3653 /* not an even multiple of the DMA buffer size then we need to */
3654 /* round the buffer count per frame up one. */
3655
3656 BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
3657 if ( info->max_frame_size % DMABUFFERSIZE )
3658 BuffersPerFrame++;
3659
3660 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3661 /*
3662 * The PCI adapter has 256KBytes of shared memory to use.
3663 * This is 64 PAGE_SIZE buffers.
3664 *
3665 * The first page is used for padding at this time so the
3666 * buffer list does not begin at offset 0 of the PCI
3667 * adapter's shared memory.
3668 *
3669 * The 2nd page is used for the buffer list. A 4K buffer
3670 * list can hold 128 DMA_BUFFER structures at 32 bytes
3671 * each.
3672 *
3673 * This leaves 62 4K pages.
3674 *
3675 * The next N pages are used for transmit frame(s). We
3676 * reserve enough 4K page blocks to hold the required
3677 * number of transmit dma buffers (num_tx_dma_buffers),
3678 * each of MaxFrameSize size.
3679 *
3680 * Of the remaining pages (62-N), determine how many can
3681 * be used to receive full MaxFrameSize inbound frames
3682 */
3683 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3684 info->rx_buffer_count = 62 - info->tx_buffer_count;
3685 } else {
3686 /* Calculate the number of PAGE_SIZE buffers needed for */
3687 /* receive and transmit DMA buffers. */
3688
3689
3690 /* Calculate the number of DMA buffers necessary to */
3691 /* hold 7 max size receive frames and one max size transmit frame. */
3692 /* The receive buffer count is bumped by one so we avoid an */
3693 /* End of List condition if all receive buffers are used when */
3694 /* using linked list DMA buffers. */
3695
3696 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3697 info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
3698
3699 /*
3700 * limit total TxBuffers & RxBuffers to 62 4K total
3701 * (ala PCI Allocation)
3702 */
3703
3704 if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
3705 info->rx_buffer_count = 62 - info->tx_buffer_count;
3706
3707 }
3708
3709 if ( debug_level >= DEBUG_LEVEL_INFO )
3710 printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
3711 __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
3712
3713 if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
3714 mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
3715 mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
3716 mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
3717 mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
3718 printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
3719 return -ENOMEM;
3720 }
3721
3722 mgsl_reset_rx_dma_buffers( info );
3723 mgsl_reset_tx_dma_buffers( info );
3724
3725 return 0;
3726
3727} /* end of mgsl_allocate_dma_buffers() */
3728
3729/*
3730 * mgsl_alloc_buffer_list_memory()
3731 *
3732 * Allocate a common DMA buffer for use as the
3733 * receive and transmit buffer lists.
3734 *
3735 * A buffer list is a set of buffer entries where each entry contains
3736 * a pointer to an actual buffer and a pointer to the next buffer entry
3737 * (plus some other info about the buffer).
3738 *
3739 * The buffer entries for a list are built to form a circular list so
3740 * that when the entire list has been traversed you start back at the
3741 * beginning.
3742 *
3743 * This function allocates memory for just the buffer entries.
3744 * The links (pointer to next entry) are filled in with the physical
3745 * address of the next entry so the adapter can navigate the list
3746 * using bus master DMA. The pointers to the actual buffers are filled
3747 * out later when the actual buffers are allocated.
3748 *
3749 * Arguments: info pointer to device instance data
3750 * Return Value: 0 if success, otherwise error
3751 */
3752static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
3753{
3754 unsigned int i;
3755
3756 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3757 /* PCI adapter uses shared memory. */
3758 info->buffer_list = info->memory_base + info->last_mem_alloc;
3759 info->buffer_list_phys = info->last_mem_alloc;
3760 info->last_mem_alloc += BUFFERLISTSIZE;
3761 } else {
3762 /* ISA adapter uses system memory. */
3763 /* The buffer lists are allocated as a common buffer that both */
3764 /* the processor and adapter can access. This allows the driver to */
3765 /* inspect portions of the buffer while other portions are being */
3766 /* updated by the adapter using Bus Master DMA. */
3767
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003768 info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
3769 if (info->buffer_list == NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003770 return -ENOMEM;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003771 info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003772 }
3773
3774 /* We got the memory for the buffer entry lists. */
3775 /* Initialize the memory block to all zeros. */
3776 memset( info->buffer_list, 0, BUFFERLISTSIZE );
3777
3778 /* Save virtual address pointers to the receive and */
3779 /* transmit buffer lists. (Receive 1st). These pointers will */
3780 /* be used by the processor to access the lists. */
3781 info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3782 info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3783 info->tx_buffer_list += info->rx_buffer_count;
3784
3785 /*
3786 * Build the links for the buffer entry lists such that
3787 * two circular lists are built. (Transmit and Receive).
3788 *
3789 * Note: the links are physical addresses
3790 * which are read by the adapter to determine the next
3791 * buffer entry to use.
3792 */
3793
3794 for ( i = 0; i < info->rx_buffer_count; i++ ) {
3795 /* calculate and store physical address of this buffer entry */
3796 info->rx_buffer_list[i].phys_entry =
3797 info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
3798
3799 /* calculate and store physical address of */
3800 /* next entry in cirular list of entries */
3801
3802 info->rx_buffer_list[i].link = info->buffer_list_phys;
3803
3804 if ( i < info->rx_buffer_count - 1 )
3805 info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3806 }
3807
3808 for ( i = 0; i < info->tx_buffer_count; i++ ) {
3809 /* calculate and store physical address of this buffer entry */
3810 info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
3811 ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
3812
3813 /* calculate and store physical address of */
3814 /* next entry in cirular list of entries */
3815
3816 info->tx_buffer_list[i].link = info->buffer_list_phys +
3817 info->rx_buffer_count * sizeof(DMABUFFERENTRY);
3818
3819 if ( i < info->tx_buffer_count - 1 )
3820 info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3821 }
3822
3823 return 0;
3824
3825} /* end of mgsl_alloc_buffer_list_memory() */
3826
3827/* Free DMA buffers allocated for use as the
3828 * receive and transmit buffer lists.
3829 * Warning:
3830 *
3831 * The data transfer buffers associated with the buffer list
3832 * MUST be freed before freeing the buffer list itself because
3833 * the buffer list contains the information necessary to free
3834 * the individual buffers!
3835 */
3836static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
3837{
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003838 if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
3839 dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003840
3841 info->buffer_list = NULL;
3842 info->rx_buffer_list = NULL;
3843 info->tx_buffer_list = NULL;
3844
3845} /* end of mgsl_free_buffer_list_memory() */
3846
3847/*
3848 * mgsl_alloc_frame_memory()
3849 *
3850 * Allocate the frame DMA buffers used by the specified buffer list.
3851 * Each DMA buffer will be one memory page in size. This is necessary
3852 * because memory can fragment enough that it may be impossible
3853 * contiguous pages.
3854 *
3855 * Arguments:
3856 *
3857 * info pointer to device instance data
3858 * BufferList pointer to list of buffer entries
3859 * Buffercount count of buffer entries in buffer list
3860 *
3861 * Return Value: 0 if success, otherwise -ENOMEM
3862 */
3863static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
3864{
3865 int i;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003866 u32 phys_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003867
3868 /* Allocate page sized buffers for the receive buffer list */
3869
3870 for ( i = 0; i < Buffercount; i++ ) {
3871 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3872 /* PCI adapter uses shared memory buffers. */
3873 BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
3874 phys_addr = info->last_mem_alloc;
3875 info->last_mem_alloc += DMABUFFERSIZE;
3876 } else {
3877 /* ISA adapter uses system memory. */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003878 BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
3879 if (BufferList[i].virt_addr == NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003880 return -ENOMEM;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003881 phys_addr = (u32)(BufferList[i].dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003882 }
3883 BufferList[i].phys_addr = phys_addr;
3884 }
3885
3886 return 0;
3887
3888} /* end of mgsl_alloc_frame_memory() */
3889
3890/*
3891 * mgsl_free_frame_memory()
3892 *
3893 * Free the buffers associated with
3894 * each buffer entry of a buffer list.
3895 *
3896 * Arguments:
3897 *
3898 * info pointer to device instance data
3899 * BufferList pointer to list of buffer entries
3900 * Buffercount count of buffer entries in buffer list
3901 *
3902 * Return Value: None
3903 */
3904static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
3905{
3906 int i;
3907
3908 if ( BufferList ) {
3909 for ( i = 0 ; i < Buffercount ; i++ ) {
3910 if ( BufferList[i].virt_addr ) {
3911 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003912 dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003913 BufferList[i].virt_addr = NULL;
3914 }
3915 }
3916 }
3917
3918} /* end of mgsl_free_frame_memory() */
3919
3920/* mgsl_free_dma_buffers()
3921 *
3922 * Free DMA buffers
3923 *
3924 * Arguments: info pointer to device instance data
3925 * Return Value: None
3926 */
3927static void mgsl_free_dma_buffers( struct mgsl_struct *info )
3928{
3929 mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
3930 mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
3931 mgsl_free_buffer_list_memory( info );
3932
3933} /* end of mgsl_free_dma_buffers() */
3934
3935
3936/*
3937 * mgsl_alloc_intermediate_rxbuffer_memory()
3938 *
3939 * Allocate a buffer large enough to hold max_frame_size. This buffer
3940 * is used to pass an assembled frame to the line discipline.
3941 *
3942 * Arguments:
3943 *
3944 * info pointer to device instance data
3945 *
3946 * Return Value: 0 if success, otherwise -ENOMEM
3947 */
3948static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3949{
3950 info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
3951 if ( info->intermediate_rxbuffer == NULL )
3952 return -ENOMEM;
3953
3954 return 0;
3955
3956} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */
3957
3958/*
3959 * mgsl_free_intermediate_rxbuffer_memory()
3960 *
3961 *
3962 * Arguments:
3963 *
3964 * info pointer to device instance data
3965 *
3966 * Return Value: None
3967 */
3968static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3969{
Jesper Juhl735d5662005-11-07 01:01:29 -08003970 kfree(info->intermediate_rxbuffer);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003971 info->intermediate_rxbuffer = NULL;
3972
3973} /* end of mgsl_free_intermediate_rxbuffer_memory() */
3974
3975/*
3976 * mgsl_alloc_intermediate_txbuffer_memory()
3977 *
3978 * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
3979 * This buffer is used to load transmit frames into the adapter's dma transfer
3980 * buffers when there is sufficient space.
3981 *
3982 * Arguments:
3983 *
3984 * info pointer to device instance data
3985 *
3986 * Return Value: 0 if success, otherwise -ENOMEM
3987 */
3988static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
3989{
3990 int i;
3991
3992 if ( debug_level >= DEBUG_LEVEL_INFO )
3993 printk("%s %s(%d) allocating %d tx holding buffers\n",
3994 info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
3995
3996 memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
3997
3998 for ( i=0; i<info->num_tx_holding_buffers; ++i) {
3999 info->tx_holding_buffers[i].buffer =
4000 kmalloc(info->max_frame_size, GFP_KERNEL);
Amit Choudharyd9a2f4a2007-05-08 00:26:13 -07004001 if (info->tx_holding_buffers[i].buffer == NULL) {
4002 for (--i; i >= 0; i--) {
4003 kfree(info->tx_holding_buffers[i].buffer);
4004 info->tx_holding_buffers[i].buffer = NULL;
4005 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07004006 return -ENOMEM;
Amit Choudharyd9a2f4a2007-05-08 00:26:13 -07004007 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07004008 }
4009
4010 return 0;
4011
4012} /* end of mgsl_alloc_intermediate_txbuffer_memory() */
4013
4014/*
4015 * mgsl_free_intermediate_txbuffer_memory()
4016 *
4017 *
4018 * Arguments:
4019 *
4020 * info pointer to device instance data
4021 *
4022 * Return Value: None
4023 */
4024static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
4025{
4026 int i;
4027
4028 for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
Jesper Juhl735d5662005-11-07 01:01:29 -08004029 kfree(info->tx_holding_buffers[i].buffer);
4030 info->tx_holding_buffers[i].buffer = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004031 }
4032
4033 info->get_tx_holding_index = 0;
4034 info->put_tx_holding_index = 0;
4035 info->tx_holding_count = 0;
4036
4037} /* end of mgsl_free_intermediate_txbuffer_memory() */
4038
4039
4040/*
4041 * load_next_tx_holding_buffer()
4042 *
4043 * attempts to load the next buffered tx request into the
4044 * tx dma buffers
4045 *
4046 * Arguments:
4047 *
4048 * info pointer to device instance data
4049 *
4050 * Return Value: 1 if next buffered tx request loaded
4051 * into adapter's tx dma buffer,
4052 * 0 otherwise
4053 */
4054static int load_next_tx_holding_buffer(struct mgsl_struct *info)
4055{
4056 int ret = 0;
4057
4058 if ( info->tx_holding_count ) {
4059 /* determine if we have enough tx dma buffers
4060 * to accommodate the next tx frame
4061 */
4062 struct tx_holding_buffer *ptx =
4063 &info->tx_holding_buffers[info->get_tx_holding_index];
4064 int num_free = num_free_tx_dma_buffers(info);
4065 int num_needed = ptx->buffer_size / DMABUFFERSIZE;
4066 if ( ptx->buffer_size % DMABUFFERSIZE )
4067 ++num_needed;
4068
4069 if (num_needed <= num_free) {
4070 info->xmit_cnt = ptx->buffer_size;
4071 mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
4072
4073 --info->tx_holding_count;
4074 if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
4075 info->get_tx_holding_index=0;
4076
4077 /* restart transmit timer */
4078 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
4079
4080 ret = 1;
4081 }
4082 }
4083
4084 return ret;
4085}
4086
4087/*
4088 * save_tx_buffer_request()
4089 *
4090 * attempt to store transmit frame request for later transmission
4091 *
4092 * Arguments:
4093 *
4094 * info pointer to device instance data
4095 * Buffer pointer to buffer containing frame to load
4096 * BufferSize size in bytes of frame in Buffer
4097 *
4098 * Return Value: 1 if able to store, 0 otherwise
4099 */
4100static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
4101{
4102 struct tx_holding_buffer *ptx;
4103
4104 if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
4105 return 0; /* all buffers in use */
4106 }
4107
4108 ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
4109 ptx->buffer_size = BufferSize;
4110 memcpy( ptx->buffer, Buffer, BufferSize);
4111
4112 ++info->tx_holding_count;
4113 if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
4114 info->put_tx_holding_index=0;
4115
4116 return 1;
4117}
4118
4119static int mgsl_claim_resources(struct mgsl_struct *info)
4120{
4121 if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
4122 printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
4123 __FILE__,__LINE__,info->device_name, info->io_base);
4124 return -ENODEV;
4125 }
4126 info->io_addr_requested = 1;
4127
4128 if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
4129 info->device_name, info ) < 0 ) {
4130 printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
4131 __FILE__,__LINE__,info->device_name, info->irq_level );
4132 goto errout;
4133 }
4134 info->irq_requested = 1;
4135
4136 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4137 if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
4138 printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
4139 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
4140 goto errout;
4141 }
4142 info->shared_mem_requested = 1;
4143 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
4144 printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
4145 __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
4146 goto errout;
4147 }
4148 info->lcr_mem_requested = 1;
4149
4150 info->memory_base = ioremap(info->phys_memory_base,0x40000);
4151 if (!info->memory_base) {
4152 printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
4153 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4154 goto errout;
4155 }
4156
4157 if ( !mgsl_memory_test(info) ) {
4158 printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
4159 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4160 goto errout;
4161 }
4162
4163 info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE) + info->lcr_offset;
4164 if (!info->lcr_base) {
4165 printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
4166 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
4167 goto errout;
4168 }
4169
4170 } else {
4171 /* claim DMA channel */
4172
4173 if (request_dma(info->dma_level,info->device_name) < 0){
4174 printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
4175 __FILE__,__LINE__,info->device_name, info->dma_level );
4176 mgsl_release_resources( info );
4177 return -ENODEV;
4178 }
4179 info->dma_requested = 1;
4180
4181 /* ISA adapter uses bus master DMA */
4182 set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
4183 enable_dma(info->dma_level);
4184 }
4185
4186 if ( mgsl_allocate_dma_buffers(info) < 0 ) {
4187 printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
4188 __FILE__,__LINE__,info->device_name, info->dma_level );
4189 goto errout;
4190 }
4191
4192 return 0;
4193errout:
4194 mgsl_release_resources(info);
4195 return -ENODEV;
4196
4197} /* end of mgsl_claim_resources() */
4198
4199static void mgsl_release_resources(struct mgsl_struct *info)
4200{
4201 if ( debug_level >= DEBUG_LEVEL_INFO )
4202 printk( "%s(%d):mgsl_release_resources(%s) entry\n",
4203 __FILE__,__LINE__,info->device_name );
4204
4205 if ( info->irq_requested ) {
4206 free_irq(info->irq_level, info);
4207 info->irq_requested = 0;
4208 }
4209 if ( info->dma_requested ) {
4210 disable_dma(info->dma_level);
4211 free_dma(info->dma_level);
4212 info->dma_requested = 0;
4213 }
4214 mgsl_free_dma_buffers(info);
4215 mgsl_free_intermediate_rxbuffer_memory(info);
4216 mgsl_free_intermediate_txbuffer_memory(info);
4217
4218 if ( info->io_addr_requested ) {
4219 release_region(info->io_base,info->io_addr_size);
4220 info->io_addr_requested = 0;
4221 }
4222 if ( info->shared_mem_requested ) {
4223 release_mem_region(info->phys_memory_base,0x40000);
4224 info->shared_mem_requested = 0;
4225 }
4226 if ( info->lcr_mem_requested ) {
4227 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
4228 info->lcr_mem_requested = 0;
4229 }
4230 if (info->memory_base){
4231 iounmap(info->memory_base);
4232 info->memory_base = NULL;
4233 }
4234 if (info->lcr_base){
4235 iounmap(info->lcr_base - info->lcr_offset);
4236 info->lcr_base = NULL;
4237 }
4238
4239 if ( debug_level >= DEBUG_LEVEL_INFO )
4240 printk( "%s(%d):mgsl_release_resources(%s) exit\n",
4241 __FILE__,__LINE__,info->device_name );
4242
4243} /* end of mgsl_release_resources() */
4244
4245/* mgsl_add_device()
4246 *
4247 * Add the specified device instance data structure to the
4248 * global linked list of devices and increment the device count.
4249 *
4250 * Arguments: info pointer to device instance data
4251 * Return Value: None
4252 */
4253static void mgsl_add_device( struct mgsl_struct *info )
4254{
4255 info->next_device = NULL;
4256 info->line = mgsl_device_count;
4257 sprintf(info->device_name,"ttySL%d",info->line);
4258
4259 if (info->line < MAX_TOTAL_DEVICES) {
4260 if (maxframe[info->line])
4261 info->max_frame_size = maxframe[info->line];
4262 info->dosyncppp = dosyncppp[info->line];
4263
4264 if (txdmabufs[info->line]) {
4265 info->num_tx_dma_buffers = txdmabufs[info->line];
4266 if (info->num_tx_dma_buffers < 1)
4267 info->num_tx_dma_buffers = 1;
4268 }
4269
4270 if (txholdbufs[info->line]) {
4271 info->num_tx_holding_buffers = txholdbufs[info->line];
4272 if (info->num_tx_holding_buffers < 1)
4273 info->num_tx_holding_buffers = 1;
4274 else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
4275 info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
4276 }
4277 }
4278
4279 mgsl_device_count++;
4280
4281 if ( !mgsl_device_list )
4282 mgsl_device_list = info;
4283 else {
4284 struct mgsl_struct *current_dev = mgsl_device_list;
4285 while( current_dev->next_device )
4286 current_dev = current_dev->next_device;
4287 current_dev->next_device = info;
4288 }
4289
4290 if ( info->max_frame_size < 4096 )
4291 info->max_frame_size = 4096;
4292 else if ( info->max_frame_size > 65535 )
4293 info->max_frame_size = 65535;
4294
4295 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4296 printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
4297 info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
4298 info->phys_memory_base, info->phys_lcr_base,
4299 info->max_frame_size );
4300 } else {
4301 printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
4302 info->device_name, info->io_base, info->irq_level, info->dma_level,
4303 info->max_frame_size );
4304 }
4305
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08004306#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07004307 hdlcdev_init(info);
4308#endif
4309
4310} /* end of mgsl_add_device() */
4311
4312/* mgsl_allocate_device()
4313 *
4314 * Allocate and initialize a device instance structure
4315 *
4316 * Arguments: none
4317 * Return Value: pointer to mgsl_struct if success, otherwise NULL
4318 */
4319static struct mgsl_struct* mgsl_allocate_device(void)
4320{
4321 struct mgsl_struct *info;
4322
Yoann Padioleaudd00cc42007-07-19 01:49:03 -07004323 info = kzalloc(sizeof(struct mgsl_struct),
Linus Torvalds1da177e2005-04-16 15:20:36 -07004324 GFP_KERNEL);
4325
4326 if (!info) {
4327 printk("Error can't allocate device instance data\n");
4328 } else {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004329 info->magic = MGSL_MAGIC;
David Howellsc4028952006-11-22 14:57:56 +00004330 INIT_WORK(&info->task, mgsl_bh_handler);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004331 info->max_frame_size = 4096;
4332 info->close_delay = 5*HZ/10;
4333 info->closing_wait = 30*HZ;
4334 init_waitqueue_head(&info->open_wait);
4335 init_waitqueue_head(&info->close_wait);
4336 init_waitqueue_head(&info->status_event_wait_q);
4337 init_waitqueue_head(&info->event_wait_q);
4338 spin_lock_init(&info->irq_spinlock);
4339 spin_lock_init(&info->netlock);
4340 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
4341 info->idle_mode = HDLC_TXIDLE_FLAGS;
4342 info->num_tx_dma_buffers = 1;
4343 info->num_tx_holding_buffers = 0;
4344 }
4345
4346 return info;
4347
4348} /* end of mgsl_allocate_device()*/
4349
Jeff Dikeb68e31d2006-10-02 02:17:18 -07004350static const struct tty_operations mgsl_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004351 .open = mgsl_open,
4352 .close = mgsl_close,
4353 .write = mgsl_write,
4354 .put_char = mgsl_put_char,
4355 .flush_chars = mgsl_flush_chars,
4356 .write_room = mgsl_write_room,
4357 .chars_in_buffer = mgsl_chars_in_buffer,
4358 .flush_buffer = mgsl_flush_buffer,
4359 .ioctl = mgsl_ioctl,
4360 .throttle = mgsl_throttle,
4361 .unthrottle = mgsl_unthrottle,
4362 .send_xchar = mgsl_send_xchar,
4363 .break_ctl = mgsl_break,
4364 .wait_until_sent = mgsl_wait_until_sent,
4365 .read_proc = mgsl_read_proc,
4366 .set_termios = mgsl_set_termios,
4367 .stop = mgsl_stop,
4368 .start = mgsl_start,
4369 .hangup = mgsl_hangup,
4370 .tiocmget = tiocmget,
4371 .tiocmset = tiocmset,
4372};
4373
4374/*
4375 * perform tty device initialization
4376 */
4377static int mgsl_init_tty(void)
4378{
4379 int rc;
4380
4381 serial_driver = alloc_tty_driver(128);
4382 if (!serial_driver)
4383 return -ENOMEM;
4384
4385 serial_driver->owner = THIS_MODULE;
4386 serial_driver->driver_name = "synclink";
4387 serial_driver->name = "ttySL";
4388 serial_driver->major = ttymajor;
4389 serial_driver->minor_start = 64;
4390 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4391 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4392 serial_driver->init_termios = tty_std_termios;
4393 serial_driver->init_termios.c_cflag =
4394 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
Alan Cox606d0992006-12-08 02:38:45 -08004395 serial_driver->init_termios.c_ispeed = 9600;
4396 serial_driver->init_termios.c_ospeed = 9600;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004397 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4398 tty_set_operations(serial_driver, &mgsl_ops);
4399 if ((rc = tty_register_driver(serial_driver)) < 0) {
4400 printk("%s(%d):Couldn't register serial driver\n",
4401 __FILE__,__LINE__);
4402 put_tty_driver(serial_driver);
4403 serial_driver = NULL;
4404 return rc;
4405 }
4406
4407 printk("%s %s, tty major#%d\n",
4408 driver_name, driver_version,
4409 serial_driver->major);
4410 return 0;
4411}
4412
4413/* enumerate user specified ISA adapters
4414 */
4415static void mgsl_enum_isa_devices(void)
4416{
4417 struct mgsl_struct *info;
4418 int i;
4419
4420 /* Check for user specified ISA devices */
4421
4422 for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
4423 if ( debug_level >= DEBUG_LEVEL_INFO )
4424 printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
4425 io[i], irq[i], dma[i] );
4426
4427 info = mgsl_allocate_device();
4428 if ( !info ) {
4429 /* error allocating device instance data */
4430 if ( debug_level >= DEBUG_LEVEL_ERROR )
4431 printk( "can't allocate device instance data.\n");
4432 continue;
4433 }
4434
4435 /* Copy user configuration info to device instance data */
4436 info->io_base = (unsigned int)io[i];
4437 info->irq_level = (unsigned int)irq[i];
4438 info->irq_level = irq_canonicalize(info->irq_level);
4439 info->dma_level = (unsigned int)dma[i];
4440 info->bus_type = MGSL_BUS_TYPE_ISA;
4441 info->io_addr_size = 16;
4442 info->irq_flags = 0;
4443
4444 mgsl_add_device( info );
4445 }
4446}
4447
4448static void synclink_cleanup(void)
4449{
4450 int rc;
4451 struct mgsl_struct *info;
4452 struct mgsl_struct *tmp;
4453
4454 printk("Unloading %s: %s\n", driver_name, driver_version);
4455
4456 if (serial_driver) {
4457 if ((rc = tty_unregister_driver(serial_driver)))
4458 printk("%s(%d) failed to unregister tty driver err=%d\n",
4459 __FILE__,__LINE__,rc);
4460 put_tty_driver(serial_driver);
4461 }
4462
4463 info = mgsl_device_list;
4464 while(info) {
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08004465#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07004466 hdlcdev_exit(info);
4467#endif
4468 mgsl_release_resources(info);
4469 tmp = info;
4470 info = info->next_device;
4471 kfree(tmp);
4472 }
4473
Linus Torvalds1da177e2005-04-16 15:20:36 -07004474 if (pci_registered)
4475 pci_unregister_driver(&synclink_pci_driver);
4476}
4477
4478static int __init synclink_init(void)
4479{
4480 int rc;
4481
4482 if (break_on_load) {
4483 mgsl_get_text_ptr();
4484 BREAKPOINT();
4485 }
4486
4487 printk("%s %s\n", driver_name, driver_version);
4488
4489 mgsl_enum_isa_devices();
4490 if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
4491 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4492 else
4493 pci_registered = 1;
4494
4495 if ((rc = mgsl_init_tty()) < 0)
4496 goto error;
4497
4498 return 0;
4499
4500error:
4501 synclink_cleanup();
4502 return rc;
4503}
4504
4505static void __exit synclink_exit(void)
4506{
4507 synclink_cleanup();
4508}
4509
4510module_init(synclink_init);
4511module_exit(synclink_exit);
4512
4513/*
4514 * usc_RTCmd()
4515 *
4516 * Issue a USC Receive/Transmit command to the
4517 * Channel Command/Address Register (CCAR).
4518 *
4519 * Notes:
4520 *
4521 * The command is encoded in the most significant 5 bits <15..11>
4522 * of the CCAR value. Bits <10..7> of the CCAR must be preserved
4523 * and Bits <6..0> must be written as zeros.
4524 *
4525 * Arguments:
4526 *
4527 * info pointer to device information structure
4528 * Cmd command mask (use symbolic macros)
4529 *
4530 * Return Value:
4531 *
4532 * None
4533 */
4534static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
4535{
4536 /* output command to CCAR in bits <15..11> */
4537 /* preserve bits <10..7>, bits <6..0> must be zero */
4538
4539 outw( Cmd + info->loopback_bits, info->io_base + CCAR );
4540
4541 /* Read to flush write to CCAR */
4542 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4543 inw( info->io_base + CCAR );
4544
4545} /* end of usc_RTCmd() */
4546
4547/*
4548 * usc_DmaCmd()
4549 *
4550 * Issue a DMA command to the DMA Command/Address Register (DCAR).
4551 *
4552 * Arguments:
4553 *
4554 * info pointer to device information structure
4555 * Cmd DMA command mask (usc_DmaCmd_XX Macros)
4556 *
4557 * Return Value:
4558 *
4559 * None
4560 */
4561static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
4562{
4563 /* write command mask to DCAR */
4564 outw( Cmd + info->mbre_bit, info->io_base );
4565
4566 /* Read to flush write to DCAR */
4567 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4568 inw( info->io_base );
4569
4570} /* end of usc_DmaCmd() */
4571
4572/*
4573 * usc_OutDmaReg()
4574 *
4575 * Write a 16-bit value to a USC DMA register
4576 *
4577 * Arguments:
4578 *
4579 * info pointer to device info structure
4580 * RegAddr register address (number) for write
4581 * RegValue 16-bit value to write to register
4582 *
4583 * Return Value:
4584 *
4585 * None
4586 *
4587 */
4588static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4589{
4590 /* Note: The DCAR is located at the adapter base address */
4591 /* Note: must preserve state of BIT8 in DCAR */
4592
4593 outw( RegAddr + info->mbre_bit, info->io_base );
4594 outw( RegValue, info->io_base );
4595
4596 /* Read to flush write to DCAR */
4597 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4598 inw( info->io_base );
4599
4600} /* end of usc_OutDmaReg() */
4601
4602/*
4603 * usc_InDmaReg()
4604 *
4605 * Read a 16-bit value from a DMA register
4606 *
4607 * Arguments:
4608 *
4609 * info pointer to device info structure
4610 * RegAddr register address (number) to read from
4611 *
4612 * Return Value:
4613 *
4614 * The 16-bit value read from register
4615 *
4616 */
4617static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
4618{
4619 /* Note: The DCAR is located at the adapter base address */
4620 /* Note: must preserve state of BIT8 in DCAR */
4621
4622 outw( RegAddr + info->mbre_bit, info->io_base );
4623 return inw( info->io_base );
4624
4625} /* end of usc_InDmaReg() */
4626
4627/*
4628 *
4629 * usc_OutReg()
4630 *
4631 * Write a 16-bit value to a USC serial channel register
4632 *
4633 * Arguments:
4634 *
4635 * info pointer to device info structure
4636 * RegAddr register address (number) to write to
4637 * RegValue 16-bit value to write to register
4638 *
4639 * Return Value:
4640 *
4641 * None
4642 *
4643 */
4644static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4645{
4646 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4647 outw( RegValue, info->io_base + CCAR );
4648
4649 /* Read to flush write to CCAR */
4650 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4651 inw( info->io_base + CCAR );
4652
4653} /* end of usc_OutReg() */
4654
4655/*
4656 * usc_InReg()
4657 *
4658 * Reads a 16-bit value from a USC serial channel register
4659 *
4660 * Arguments:
4661 *
4662 * info pointer to device extension
4663 * RegAddr register address (number) to read from
4664 *
4665 * Return Value:
4666 *
4667 * 16-bit value read from register
4668 */
4669static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
4670{
4671 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4672 return inw( info->io_base + CCAR );
4673
4674} /* end of usc_InReg() */
4675
4676/* usc_set_sdlc_mode()
4677 *
4678 * Set up the adapter for SDLC DMA communications.
4679 *
4680 * Arguments: info pointer to device instance data
4681 * Return Value: NONE
4682 */
4683static void usc_set_sdlc_mode( struct mgsl_struct *info )
4684{
4685 u16 RegValue;
4686 int PreSL1660;
4687
4688 /*
4689 * determine if the IUSC on the adapter is pre-SL1660. If
4690 * not, take advantage of the UnderWait feature of more
4691 * modern chips. If an underrun occurs and this bit is set,
4692 * the transmitter will idle the programmed idle pattern
4693 * until the driver has time to service the underrun. Otherwise,
4694 * the dma controller may get the cycles previously requested
4695 * and begin transmitting queued tx data.
4696 */
4697 usc_OutReg(info,TMCR,0x1f);
4698 RegValue=usc_InReg(info,TMDR);
4699 if ( RegValue == IUSC_PRE_SL1660 )
4700 PreSL1660 = 1;
4701 else
4702 PreSL1660 = 0;
4703
4704
4705 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
4706 {
4707 /*
4708 ** Channel Mode Register (CMR)
4709 **
4710 ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
4711 ** <13> 0 0 = Transmit Disabled (initially)
4712 ** <12> 0 1 = Consecutive Idles share common 0
4713 ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
4714 ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
4715 ** <3..0> 0110 Receiver Mode = HDLC/SDLC
4716 **
4717 ** 1000 1110 0000 0110 = 0x8e06
4718 */
4719 RegValue = 0x8e06;
4720
4721 /*--------------------------------------------------
4722 * ignore user options for UnderRun Actions and
4723 * preambles
4724 *--------------------------------------------------*/
4725 }
4726 else
4727 {
4728 /* Channel mode Register (CMR)
4729 *
4730 * <15..14> 00 Tx Sub modes, Underrun Action
4731 * <13> 0 1 = Send Preamble before opening flag
4732 * <12> 0 1 = Consecutive Idles share common 0
4733 * <11..8> 0110 Transmitter mode = HDLC/SDLC
4734 * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
4735 * <3..0> 0110 Receiver mode = HDLC/SDLC
4736 *
4737 * 0000 0110 0000 0110 = 0x0606
4738 */
4739 if (info->params.mode == MGSL_MODE_RAW) {
4740 RegValue = 0x0001; /* Set Receive mode = external sync */
4741
4742 usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */
4743 (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
4744
4745 /*
4746 * TxSubMode:
4747 * CMR <15> 0 Don't send CRC on Tx Underrun
4748 * CMR <14> x undefined
4749 * CMR <13> 0 Send preamble before openning sync
4750 * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength
4751 *
4752 * TxMode:
4753 * CMR <11-8) 0100 MonoSync
4754 *
4755 * 0x00 0100 xxxx xxxx 04xx
4756 */
4757 RegValue |= 0x0400;
4758 }
4759 else {
4760
4761 RegValue = 0x0606;
4762
4763 if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
4764 RegValue |= BIT14;
4765 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
4766 RegValue |= BIT15;
4767 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
4768 RegValue |= BIT15 + BIT14;
4769 }
4770
4771 if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
4772 RegValue |= BIT13;
4773 }
4774
4775 if ( info->params.mode == MGSL_MODE_HDLC &&
4776 (info->params.flags & HDLC_FLAG_SHARE_ZERO) )
4777 RegValue |= BIT12;
4778
4779 if ( info->params.addr_filter != 0xff )
4780 {
4781 /* set up receive address filtering */
4782 usc_OutReg( info, RSR, info->params.addr_filter );
4783 RegValue |= BIT4;
4784 }
4785
4786 usc_OutReg( info, CMR, RegValue );
4787 info->cmr_value = RegValue;
4788
4789 /* Receiver mode Register (RMR)
4790 *
4791 * <15..13> 000 encoding
4792 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4793 * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC)
4794 * <9> 0 1 = Include Receive chars in CRC
4795 * <8> 1 1 = Use Abort/PE bit as abort indicator
4796 * <7..6> 00 Even parity
4797 * <5> 0 parity disabled
4798 * <4..2> 000 Receive Char Length = 8 bits
4799 * <1..0> 00 Disable Receiver
4800 *
4801 * 0000 0101 0000 0000 = 0x0500
4802 */
4803
4804 RegValue = 0x0500;
4805
4806 switch ( info->params.encoding ) {
4807 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4808 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4809 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4810 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4811 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4812 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4813 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4814 }
4815
4816 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4817 RegValue |= BIT9;
4818 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4819 RegValue |= ( BIT12 | BIT10 | BIT9 );
4820
4821 usc_OutReg( info, RMR, RegValue );
4822
4823 /* Set the Receive count Limit Register (RCLR) to 0xffff. */
4824 /* When an opening flag of an SDLC frame is recognized the */
4825 /* Receive Character count (RCC) is loaded with the value in */
4826 /* RCLR. The RCC is decremented for each received byte. The */
4827 /* value of RCC is stored after the closing flag of the frame */
4828 /* allowing the frame size to be computed. */
4829
4830 usc_OutReg( info, RCLR, RCLRVALUE );
4831
4832 usc_RCmd( info, RCmd_SelectRicrdma_level );
4833
4834 /* Receive Interrupt Control Register (RICR)
4835 *
4836 * <15..8> ? RxFIFO DMA Request Level
4837 * <7> 0 Exited Hunt IA (Interrupt Arm)
4838 * <6> 0 Idle Received IA
4839 * <5> 0 Break/Abort IA
4840 * <4> 0 Rx Bound IA
4841 * <3> 1 Queued status reflects oldest 2 bytes in FIFO
4842 * <2> 0 Abort/PE IA
4843 * <1> 1 Rx Overrun IA
4844 * <0> 0 Select TC0 value for readback
4845 *
4846 * 0000 0000 0000 1000 = 0x000a
4847 */
4848
4849 /* Carry over the Exit Hunt and Idle Received bits */
4850 /* in case they have been armed by usc_ArmEvents. */
4851
4852 RegValue = usc_InReg( info, RICR ) & 0xc0;
4853
4854 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4855 usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
4856 else
4857 usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
4858
4859 /* Unlatch all Rx status bits and clear Rx status IRQ Pending */
4860
4861 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
4862 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
4863
4864 /* Transmit mode Register (TMR)
4865 *
4866 * <15..13> 000 encoding
4867 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4868 * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
4869 * <9> 0 1 = Tx CRC Enabled
4870 * <8> 0 1 = Append CRC to end of transmit frame
4871 * <7..6> 00 Transmit parity Even
4872 * <5> 0 Transmit parity Disabled
4873 * <4..2> 000 Tx Char Length = 8 bits
4874 * <1..0> 00 Disable Transmitter
4875 *
4876 * 0000 0100 0000 0000 = 0x0400
4877 */
4878
4879 RegValue = 0x0400;
4880
4881 switch ( info->params.encoding ) {
4882 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4883 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4884 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4885 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4886 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4887 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4888 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4889 }
4890
4891 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4892 RegValue |= BIT9 + BIT8;
4893 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4894 RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
4895
4896 usc_OutReg( info, TMR, RegValue );
4897
4898 usc_set_txidle( info );
4899
4900
4901 usc_TCmd( info, TCmd_SelectTicrdma_level );
4902
4903 /* Transmit Interrupt Control Register (TICR)
4904 *
4905 * <15..8> ? Transmit FIFO DMA Level
4906 * <7> 0 Present IA (Interrupt Arm)
4907 * <6> 0 Idle Sent IA
4908 * <5> 1 Abort Sent IA
4909 * <4> 1 EOF/EOM Sent IA
4910 * <3> 0 CRC Sent IA
4911 * <2> 1 1 = Wait for SW Trigger to Start Frame
4912 * <1> 1 Tx Underrun IA
4913 * <0> 0 TC0 constant on read back
4914 *
4915 * 0000 0000 0011 0110 = 0x0036
4916 */
4917
4918 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4919 usc_OutReg( info, TICR, 0x0736 );
4920 else
4921 usc_OutReg( info, TICR, 0x1436 );
4922
4923 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
4924 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
4925
4926 /*
4927 ** Transmit Command/Status Register (TCSR)
4928 **
4929 ** <15..12> 0000 TCmd
4930 ** <11> 0/1 UnderWait
4931 ** <10..08> 000 TxIdle
4932 ** <7> x PreSent
4933 ** <6> x IdleSent
4934 ** <5> x AbortSent
4935 ** <4> x EOF/EOM Sent
4936 ** <3> x CRC Sent
4937 ** <2> x All Sent
4938 ** <1> x TxUnder
4939 ** <0> x TxEmpty
4940 **
4941 ** 0000 0000 0000 0000 = 0x0000
4942 */
4943 info->tcsr_value = 0;
4944
4945 if ( !PreSL1660 )
4946 info->tcsr_value |= TCSR_UNDERWAIT;
4947
4948 usc_OutReg( info, TCSR, info->tcsr_value );
4949
4950 /* Clock mode Control Register (CMCR)
4951 *
4952 * <15..14> 00 counter 1 Source = Disabled
4953 * <13..12> 00 counter 0 Source = Disabled
4954 * <11..10> 11 BRG1 Input is TxC Pin
4955 * <9..8> 11 BRG0 Input is TxC Pin
4956 * <7..6> 01 DPLL Input is BRG1 Output
4957 * <5..3> XXX TxCLK comes from Port 0
4958 * <2..0> XXX RxCLK comes from Port 1
4959 *
4960 * 0000 1111 0111 0111 = 0x0f77
4961 */
4962
4963 RegValue = 0x0f40;
4964
4965 if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
4966 RegValue |= 0x0003; /* RxCLK from DPLL */
4967 else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
4968 RegValue |= 0x0004; /* RxCLK from BRG0 */
4969 else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4970 RegValue |= 0x0006; /* RxCLK from TXC Input */
4971 else
4972 RegValue |= 0x0007; /* RxCLK from Port1 */
4973
4974 if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
4975 RegValue |= 0x0018; /* TxCLK from DPLL */
4976 else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
4977 RegValue |= 0x0020; /* TxCLK from BRG0 */
4978 else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4979 RegValue |= 0x0038; /* RxCLK from TXC Input */
4980 else
4981 RegValue |= 0x0030; /* TxCLK from Port0 */
4982
4983 usc_OutReg( info, CMCR, RegValue );
4984
4985
4986 /* Hardware Configuration Register (HCR)
4987 *
4988 * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4
4989 * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div
4990 * <12> 0 CVOK:0=report code violation in biphase
4991 * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4
4992 * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
4993 * <7..6> 00 reserved
4994 * <5> 0 BRG1 mode:0=continuous,1=single cycle
4995 * <4> X BRG1 Enable
4996 * <3..2> 00 reserved
4997 * <1> 0 BRG0 mode:0=continuous,1=single cycle
4998 * <0> 0 BRG0 Enable
4999 */
5000
5001 RegValue = 0x0000;
5002
5003 if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) {
5004 u32 XtalSpeed;
5005 u32 DpllDivisor;
5006 u16 Tc;
5007
5008 /* DPLL is enabled. Use BRG1 to provide continuous reference clock */
5009 /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */
5010
5011 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5012 XtalSpeed = 11059200;
5013 else
5014 XtalSpeed = 14745600;
5015
5016 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
5017 DpllDivisor = 16;
5018 RegValue |= BIT10;
5019 }
5020 else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
5021 DpllDivisor = 8;
5022 RegValue |= BIT11;
5023 }
5024 else
5025 DpllDivisor = 32;
5026
5027 /* Tc = (Xtal/Speed) - 1 */
5028 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5029 /* then rounding up gives a more precise time constant. Instead */
5030 /* of rounding up and then subtracting 1 we just don't subtract */
5031 /* the one in this case. */
5032
5033 /*--------------------------------------------------
5034 * ejz: for DPLL mode, application should use the
5035 * same clock speed as the partner system, even
5036 * though clocking is derived from the input RxData.
5037 * In case the user uses a 0 for the clock speed,
5038 * default to 0xffffffff and don't try to divide by
5039 * zero
5040 *--------------------------------------------------*/
5041 if ( info->params.clock_speed )
5042 {
5043 Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
5044 if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
5045 / info->params.clock_speed) )
5046 Tc--;
5047 }
5048 else
5049 Tc = -1;
5050
5051
5052 /* Write 16-bit Time Constant for BRG1 */
5053 usc_OutReg( info, TC1R, Tc );
5054
5055 RegValue |= BIT4; /* enable BRG1 */
5056
5057 switch ( info->params.encoding ) {
5058 case HDLC_ENCODING_NRZ:
5059 case HDLC_ENCODING_NRZB:
5060 case HDLC_ENCODING_NRZI_MARK:
5061 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
5062 case HDLC_ENCODING_BIPHASE_MARK:
5063 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
5064 case HDLC_ENCODING_BIPHASE_LEVEL:
5065 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break;
5066 }
5067 }
5068
5069 usc_OutReg( info, HCR, RegValue );
5070
5071
5072 /* Channel Control/status Register (CCSR)
5073 *
5074 * <15> X RCC FIFO Overflow status (RO)
5075 * <14> X RCC FIFO Not Empty status (RO)
5076 * <13> 0 1 = Clear RCC FIFO (WO)
5077 * <12> X DPLL Sync (RW)
5078 * <11> X DPLL 2 Missed Clocks status (RO)
5079 * <10> X DPLL 1 Missed Clock status (RO)
5080 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
5081 * <7> X SDLC Loop On status (RO)
5082 * <6> X SDLC Loop Send status (RO)
5083 * <5> 1 Bypass counters for TxClk and RxClk (RW)
5084 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
5085 * <1..0> 00 reserved
5086 *
5087 * 0000 0000 0010 0000 = 0x0020
5088 */
5089
5090 usc_OutReg( info, CCSR, 0x1020 );
5091
5092
5093 if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
5094 usc_OutReg( info, SICR,
5095 (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
5096 }
5097
5098
5099 /* enable Master Interrupt Enable bit (MIE) */
5100 usc_EnableMasterIrqBit( info );
5101
5102 usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA +
5103 TRANSMIT_STATUS + TRANSMIT_DATA + MISC);
5104
5105 /* arm RCC underflow interrupt */
5106 usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
5107 usc_EnableInterrupts(info, MISC);
5108
5109 info->mbre_bit = 0;
5110 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5111 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5112 info->mbre_bit = BIT8;
5113 outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
5114
5115 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
5116 /* Enable DMAEN (Port 7, Bit 14) */
5117 /* This connects the DMA request signal to the ISA bus */
5118 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
5119 }
5120
5121 /* DMA Control Register (DCR)
5122 *
5123 * <15..14> 10 Priority mode = Alternating Tx/Rx
5124 * 01 Rx has priority
5125 * 00 Tx has priority
5126 *
5127 * <13> 1 Enable Priority Preempt per DCR<15..14>
5128 * (WARNING DCR<11..10> must be 00 when this is 1)
5129 * 0 Choose activate channel per DCR<11..10>
5130 *
5131 * <12> 0 Little Endian for Array/List
5132 * <11..10> 00 Both Channels can use each bus grant
5133 * <9..6> 0000 reserved
5134 * <5> 0 7 CLK - Minimum Bus Re-request Interval
5135 * <4> 0 1 = drive D/C and S/D pins
5136 * <3> 1 1 = Add one wait state to all DMA cycles.
5137 * <2> 0 1 = Strobe /UAS on every transfer.
5138 * <1..0> 11 Addr incrementing only affects LS24 bits
5139 *
5140 * 0110 0000 0000 1011 = 0x600b
5141 */
5142
5143 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5144 /* PCI adapter does not need DMA wait state */
5145 usc_OutDmaReg( info, DCR, 0xa00b );
5146 }
5147 else
5148 usc_OutDmaReg( info, DCR, 0x800b );
5149
5150
5151 /* Receive DMA mode Register (RDMR)
5152 *
5153 * <15..14> 11 DMA mode = Linked List Buffer mode
5154 * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry
5155 * <12> 1 Clear count of List Entry after fetching
5156 * <11..10> 00 Address mode = Increment
5157 * <9> 1 Terminate Buffer on RxBound
5158 * <8> 0 Bus Width = 16bits
5159 * <7..0> ? status Bits (write as 0s)
5160 *
5161 * 1111 0010 0000 0000 = 0xf200
5162 */
5163
5164 usc_OutDmaReg( info, RDMR, 0xf200 );
5165
5166
5167 /* Transmit DMA mode Register (TDMR)
5168 *
5169 * <15..14> 11 DMA mode = Linked List Buffer mode
5170 * <13> 1 TCBinA/L = fetch Tx Control Block from List entry
5171 * <12> 1 Clear count of List Entry after fetching
5172 * <11..10> 00 Address mode = Increment
5173 * <9> 1 Terminate Buffer on end of frame
5174 * <8> 0 Bus Width = 16bits
5175 * <7..0> ? status Bits (Read Only so write as 0)
5176 *
5177 * 1111 0010 0000 0000 = 0xf200
5178 */
5179
5180 usc_OutDmaReg( info, TDMR, 0xf200 );
5181
5182
5183 /* DMA Interrupt Control Register (DICR)
5184 *
5185 * <15> 1 DMA Interrupt Enable
5186 * <14> 0 1 = Disable IEO from USC
5187 * <13> 0 1 = Don't provide vector during IntAck
5188 * <12> 1 1 = Include status in Vector
5189 * <10..2> 0 reserved, Must be 0s
5190 * <1> 0 1 = Rx DMA Interrupt Enabled
5191 * <0> 0 1 = Tx DMA Interrupt Enabled
5192 *
5193 * 1001 0000 0000 0000 = 0x9000
5194 */
5195
5196 usc_OutDmaReg( info, DICR, 0x9000 );
5197
5198 usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */
5199 usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */
5200 usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */
5201
5202 /* Channel Control Register (CCR)
5203 *
5204 * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs)
5205 * <13> 0 Trigger Tx on SW Command Disabled
5206 * <12> 0 Flag Preamble Disabled
5207 * <11..10> 00 Preamble Length
5208 * <9..8> 00 Preamble Pattern
5209 * <7..6> 10 Use 32-bit Rx status Blocks (RSBs)
5210 * <5> 0 Trigger Rx on SW Command Disabled
5211 * <4..0> 0 reserved
5212 *
5213 * 1000 0000 1000 0000 = 0x8080
5214 */
5215
5216 RegValue = 0x8080;
5217
5218 switch ( info->params.preamble_length ) {
5219 case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
5220 case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
5221 case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break;
5222 }
5223
5224 switch ( info->params.preamble ) {
5225 case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break;
5226 case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break;
5227 case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break;
5228 case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break;
5229 }
5230
5231 usc_OutReg( info, CCR, RegValue );
5232
5233
5234 /*
5235 * Burst/Dwell Control Register
5236 *
5237 * <15..8> 0x20 Maximum number of transfers per bus grant
5238 * <7..0> 0x00 Maximum number of clock cycles per bus grant
5239 */
5240
5241 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5242 /* don't limit bus occupancy on PCI adapter */
5243 usc_OutDmaReg( info, BDCR, 0x0000 );
5244 }
5245 else
5246 usc_OutDmaReg( info, BDCR, 0x2000 );
5247
5248 usc_stop_transmitter(info);
5249 usc_stop_receiver(info);
5250
5251} /* end of usc_set_sdlc_mode() */
5252
5253/* usc_enable_loopback()
5254 *
5255 * Set the 16C32 for internal loopback mode.
5256 * The TxCLK and RxCLK signals are generated from the BRG0 and
5257 * the TxD is looped back to the RxD internally.
5258 *
5259 * Arguments: info pointer to device instance data
5260 * enable 1 = enable loopback, 0 = disable
5261 * Return Value: None
5262 */
5263static void usc_enable_loopback(struct mgsl_struct *info, int enable)
5264{
5265 if (enable) {
5266 /* blank external TXD output */
5267 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6));
5268
5269 /* Clock mode Control Register (CMCR)
5270 *
5271 * <15..14> 00 counter 1 Disabled
5272 * <13..12> 00 counter 0 Disabled
5273 * <11..10> 11 BRG1 Input is TxC Pin
5274 * <9..8> 11 BRG0 Input is TxC Pin
5275 * <7..6> 01 DPLL Input is BRG1 Output
5276 * <5..3> 100 TxCLK comes from BRG0
5277 * <2..0> 100 RxCLK comes from BRG0
5278 *
5279 * 0000 1111 0110 0100 = 0x0f64
5280 */
5281
5282 usc_OutReg( info, CMCR, 0x0f64 );
5283
5284 /* Write 16-bit Time Constant for BRG0 */
5285 /* use clock speed if available, otherwise use 8 for diagnostics */
5286 if (info->params.clock_speed) {
5287 if (info->bus_type == MGSL_BUS_TYPE_PCI)
5288 usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
5289 else
5290 usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
5291 } else
5292 usc_OutReg(info, TC0R, (u16)8);
5293
5294 /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
5295 mode = Continuous Set Bit 0 to enable BRG0. */
5296 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5297
5298 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5299 usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
5300
5301 /* set Internal Data loopback mode */
5302 info->loopback_bits = 0x300;
5303 outw( 0x0300, info->io_base + CCAR );
5304 } else {
5305 /* enable external TXD output */
5306 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6));
5307
5308 /* clear Internal Data loopback mode */
5309 info->loopback_bits = 0;
5310 outw( 0,info->io_base + CCAR );
5311 }
5312
5313} /* end of usc_enable_loopback() */
5314
5315/* usc_enable_aux_clock()
5316 *
5317 * Enabled the AUX clock output at the specified frequency.
5318 *
5319 * Arguments:
5320 *
5321 * info pointer to device extension
5322 * data_rate data rate of clock in bits per second
5323 * A data rate of 0 disables the AUX clock.
5324 *
5325 * Return Value: None
5326 */
5327static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
5328{
5329 u32 XtalSpeed;
5330 u16 Tc;
5331
5332 if ( data_rate ) {
5333 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5334 XtalSpeed = 11059200;
5335 else
5336 XtalSpeed = 14745600;
5337
5338
5339 /* Tc = (Xtal/Speed) - 1 */
5340 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5341 /* then rounding up gives a more precise time constant. Instead */
5342 /* of rounding up and then subtracting 1 we just don't subtract */
5343 /* the one in this case. */
5344
5345
5346 Tc = (u16)(XtalSpeed/data_rate);
5347 if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
5348 Tc--;
5349
5350 /* Write 16-bit Time Constant for BRG0 */
5351 usc_OutReg( info, TC0R, Tc );
5352
5353 /*
5354 * Hardware Configuration Register (HCR)
5355 * Clear Bit 1, BRG0 mode = Continuous
5356 * Set Bit 0 to enable BRG0.
5357 */
5358
5359 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5360
5361 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5362 usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
5363 } else {
5364 /* data rate == 0 so turn off BRG0 */
5365 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
5366 }
5367
5368} /* end of usc_enable_aux_clock() */
5369
5370/*
5371 *
5372 * usc_process_rxoverrun_sync()
5373 *
5374 * This function processes a receive overrun by resetting the
5375 * receive DMA buffers and issuing a Purge Rx FIFO command
5376 * to allow the receiver to continue receiving.
5377 *
5378 * Arguments:
5379 *
5380 * info pointer to device extension
5381 *
5382 * Return Value: None
5383 */
5384static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
5385{
5386 int start_index;
5387 int end_index;
5388 int frame_start_index;
5389 int start_of_frame_found = FALSE;
5390 int end_of_frame_found = FALSE;
5391 int reprogram_dma = FALSE;
5392
5393 DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
5394 u32 phys_addr;
5395
5396 usc_DmaCmd( info, DmaCmd_PauseRxChannel );
5397 usc_RCmd( info, RCmd_EnterHuntmode );
5398 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5399
5400 /* CurrentRxBuffer points to the 1st buffer of the next */
5401 /* possibly available receive frame. */
5402
5403 frame_start_index = start_index = end_index = info->current_rx_buffer;
5404
5405 /* Search for an unfinished string of buffers. This means */
5406 /* that a receive frame started (at least one buffer with */
5407 /* count set to zero) but there is no terminiting buffer */
5408 /* (status set to non-zero). */
5409
5410 while( !buffer_list[end_index].count )
5411 {
5412 /* Count field has been reset to zero by 16C32. */
5413 /* This buffer is currently in use. */
5414
5415 if ( !start_of_frame_found )
5416 {
5417 start_of_frame_found = TRUE;
5418 frame_start_index = end_index;
5419 end_of_frame_found = FALSE;
5420 }
5421
5422 if ( buffer_list[end_index].status )
5423 {
5424 /* Status field has been set by 16C32. */
5425 /* This is the last buffer of a received frame. */
5426
5427 /* We want to leave the buffers for this frame intact. */
5428 /* Move on to next possible frame. */
5429
5430 start_of_frame_found = FALSE;
5431 end_of_frame_found = TRUE;
5432 }
5433
5434 /* advance to next buffer entry in linked list */
5435 end_index++;
5436 if ( end_index == info->rx_buffer_count )
5437 end_index = 0;
5438
5439 if ( start_index == end_index )
5440 {
5441 /* The entire list has been searched with all Counts == 0 and */
5442 /* all Status == 0. The receive buffers are */
5443 /* completely screwed, reset all receive buffers! */
5444 mgsl_reset_rx_dma_buffers( info );
5445 frame_start_index = 0;
5446 start_of_frame_found = FALSE;
5447 reprogram_dma = TRUE;
5448 break;
5449 }
5450 }
5451
5452 if ( start_of_frame_found && !end_of_frame_found )
5453 {
5454 /* There is an unfinished string of receive DMA buffers */
5455 /* as a result of the receiver overrun. */
5456
5457 /* Reset the buffers for the unfinished frame */
5458 /* and reprogram the receive DMA controller to start */
5459 /* at the 1st buffer of unfinished frame. */
5460
5461 start_index = frame_start_index;
5462
5463 do
5464 {
5465 *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
5466
5467 /* Adjust index for wrap around. */
5468 if ( start_index == info->rx_buffer_count )
5469 start_index = 0;
5470
5471 } while( start_index != end_index );
5472
5473 reprogram_dma = TRUE;
5474 }
5475
5476 if ( reprogram_dma )
5477 {
5478 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
5479 usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5480 usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5481
5482 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5483
5484 /* This empties the receive FIFO and loads the RCC with RCLR */
5485 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5486
5487 /* program 16C32 with physical address of 1st DMA buffer entry */
5488 phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
5489 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5490 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5491
5492 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5493 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5494 usc_EnableInterrupts( info, RECEIVE_STATUS );
5495
5496 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5497 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5498
5499 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5500 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5501 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5502 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5503 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5504 else
5505 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5506 }
5507 else
5508 {
5509 /* This empties the receive FIFO and loads the RCC with RCLR */
5510 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5511 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5512 }
5513
5514} /* end of usc_process_rxoverrun_sync() */
5515
5516/* usc_stop_receiver()
5517 *
5518 * Disable USC receiver
5519 *
5520 * Arguments: info pointer to device instance data
5521 * Return Value: None
5522 */
5523static void usc_stop_receiver( struct mgsl_struct *info )
5524{
5525 if (debug_level >= DEBUG_LEVEL_ISR)
5526 printk("%s(%d):usc_stop_receiver(%s)\n",
5527 __FILE__,__LINE__, info->device_name );
5528
5529 /* Disable receive DMA channel. */
5530 /* This also disables receive DMA channel interrupts */
5531 usc_DmaCmd( info, DmaCmd_ResetRxChannel );
5532
5533 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5534 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5535 usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS );
5536
5537 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5538
5539 /* This empties the receive FIFO and loads the RCC with RCLR */
5540 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5541 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5542
5543 info->rx_enabled = 0;
5544 info->rx_overflow = 0;
5545 info->rx_rcc_underrun = 0;
5546
5547} /* end of stop_receiver() */
5548
5549/* usc_start_receiver()
5550 *
5551 * Enable the USC receiver
5552 *
5553 * Arguments: info pointer to device instance data
5554 * Return Value: None
5555 */
5556static void usc_start_receiver( struct mgsl_struct *info )
5557{
5558 u32 phys_addr;
5559
5560 if (debug_level >= DEBUG_LEVEL_ISR)
5561 printk("%s(%d):usc_start_receiver(%s)\n",
5562 __FILE__,__LINE__, info->device_name );
5563
5564 mgsl_reset_rx_dma_buffers( info );
5565 usc_stop_receiver( info );
5566
5567 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5568 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5569
5570 if ( info->params.mode == MGSL_MODE_HDLC ||
5571 info->params.mode == MGSL_MODE_RAW ) {
5572 /* DMA mode Transfers */
5573 /* Program the DMA controller. */
5574 /* Enable the DMA controller end of buffer interrupt. */
5575
5576 /* program 16C32 with physical address of 1st DMA buffer entry */
5577 phys_addr = info->rx_buffer_list[0].phys_entry;
5578 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5579 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5580
5581 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5582 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5583 usc_EnableInterrupts( info, RECEIVE_STATUS );
5584
5585 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5586 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5587
5588 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5589 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5590 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5591 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5592 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5593 else
5594 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5595 } else {
5596 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
5597 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
5598 usc_EnableInterrupts(info, RECEIVE_DATA);
5599
5600 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5601 usc_RCmd( info, RCmd_EnterHuntmode );
5602
5603 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5604 }
5605
5606 usc_OutReg( info, CCSR, 0x1020 );
5607
5608 info->rx_enabled = 1;
5609
5610} /* end of usc_start_receiver() */
5611
5612/* usc_start_transmitter()
5613 *
5614 * Enable the USC transmitter and send a transmit frame if
5615 * one is loaded in the DMA buffers.
5616 *
5617 * Arguments: info pointer to device instance data
5618 * Return Value: None
5619 */
5620static void usc_start_transmitter( struct mgsl_struct *info )
5621{
5622 u32 phys_addr;
5623 unsigned int FrameSize;
5624
5625 if (debug_level >= DEBUG_LEVEL_ISR)
5626 printk("%s(%d):usc_start_transmitter(%s)\n",
5627 __FILE__,__LINE__, info->device_name );
5628
5629 if ( info->xmit_cnt ) {
5630
5631 /* If auto RTS enabled and RTS is inactive, then assert */
5632 /* RTS and set a flag indicating that the driver should */
5633 /* negate RTS when the transmission completes. */
5634
5635 info->drop_rts_on_tx_done = 0;
5636
5637 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
5638 usc_get_serial_signals( info );
5639 if ( !(info->serial_signals & SerialSignal_RTS) ) {
5640 info->serial_signals |= SerialSignal_RTS;
5641 usc_set_serial_signals( info );
5642 info->drop_rts_on_tx_done = 1;
5643 }
5644 }
5645
5646
5647 if ( info->params.mode == MGSL_MODE_ASYNC ) {
5648 if ( !info->tx_active ) {
5649 usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
5650 usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
5651 usc_EnableInterrupts(info, TRANSMIT_DATA);
5652 usc_load_txfifo(info);
5653 }
5654 } else {
5655 /* Disable transmit DMA controller while programming. */
5656 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5657
5658 /* Transmit DMA buffer is loaded, so program USC */
5659 /* to send the frame contained in the buffers. */
5660
5661 FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
5662
5663 /* if operating in Raw sync mode, reset the rcc component
5664 * of the tx dma buffer entry, otherwise, the serial controller
5665 * will send a closing sync char after this count.
5666 */
5667 if ( info->params.mode == MGSL_MODE_RAW )
5668 info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
5669
5670 /* Program the Transmit Character Length Register (TCLR) */
5671 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
5672 usc_OutReg( info, TCLR, (u16)FrameSize );
5673
5674 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5675
5676 /* Program the address of the 1st DMA Buffer Entry in linked list */
5677 phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
5678 usc_OutDmaReg( info, NTARL, (u16)phys_addr );
5679 usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
5680
5681 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5682 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
5683 usc_EnableInterrupts( info, TRANSMIT_STATUS );
5684
5685 if ( info->params.mode == MGSL_MODE_RAW &&
5686 info->num_tx_dma_buffers > 1 ) {
5687 /* When running external sync mode, attempt to 'stream' transmit */
5688 /* by filling tx dma buffers as they become available. To do this */
5689 /* we need to enable Tx DMA EOB Status interrupts : */
5690 /* */
5691 /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
5692 /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
5693
5694 usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
5695 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
5696 }
5697
5698 /* Initialize Transmit DMA Channel */
5699 usc_DmaCmd( info, DmaCmd_InitTxChannel );
5700
5701 usc_TCmd( info, TCmd_SendFrame );
5702
Jiri Slaby40565f12007-02-12 00:52:31 -08005703 mod_timer(&info->tx_timer, jiffies +
5704 msecs_to_jiffies(5000));
Linus Torvalds1da177e2005-04-16 15:20:36 -07005705 }
5706 info->tx_active = 1;
5707 }
5708
5709 if ( !info->tx_enabled ) {
5710 info->tx_enabled = 1;
5711 if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
5712 usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
5713 else
5714 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
5715 }
5716
5717} /* end of usc_start_transmitter() */
5718
5719/* usc_stop_transmitter()
5720 *
5721 * Stops the transmitter and DMA
5722 *
5723 * Arguments: info pointer to device isntance data
5724 * Return Value: None
5725 */
5726static void usc_stop_transmitter( struct mgsl_struct *info )
5727{
5728 if (debug_level >= DEBUG_LEVEL_ISR)
5729 printk("%s(%d):usc_stop_transmitter(%s)\n",
5730 __FILE__,__LINE__, info->device_name );
5731
5732 del_timer(&info->tx_timer);
5733
5734 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5735 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5736 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5737
5738 usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
5739 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5740 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5741
5742 info->tx_enabled = 0;
5743 info->tx_active = 0;
5744
5745} /* end of usc_stop_transmitter() */
5746
5747/* usc_load_txfifo()
5748 *
5749 * Fill the transmit FIFO until the FIFO is full or
5750 * there is no more data to load.
5751 *
5752 * Arguments: info pointer to device extension (instance data)
5753 * Return Value: None
5754 */
5755static void usc_load_txfifo( struct mgsl_struct *info )
5756{
5757 int Fifocount;
5758 u8 TwoBytes[2];
5759
5760 if ( !info->xmit_cnt && !info->x_char )
5761 return;
5762
5763 /* Select transmit FIFO status readback in TICR */
5764 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
5765
5766 /* load the Transmit FIFO until FIFOs full or all data sent */
5767
5768 while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
5769 /* there is more space in the transmit FIFO and */
5770 /* there is more data in transmit buffer */
5771
5772 if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
5773 /* write a 16-bit word from transmit buffer to 16C32 */
5774
5775 TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
5776 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5777 TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
5778 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5779
5780 outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
5781
5782 info->xmit_cnt -= 2;
5783 info->icount.tx += 2;
5784 } else {
5785 /* only 1 byte left to transmit or 1 FIFO slot left */
5786
5787 outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
5788 info->io_base + CCAR );
5789
5790 if (info->x_char) {
5791 /* transmit pending high priority char */
5792 outw( info->x_char,info->io_base + CCAR );
5793 info->x_char = 0;
5794 } else {
5795 outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
5796 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5797 info->xmit_cnt--;
5798 }
5799 info->icount.tx++;
5800 }
5801 }
5802
5803} /* end of usc_load_txfifo() */
5804
5805/* usc_reset()
5806 *
5807 * Reset the adapter to a known state and prepare it for further use.
5808 *
5809 * Arguments: info pointer to device instance data
5810 * Return Value: None
5811 */
5812static void usc_reset( struct mgsl_struct *info )
5813{
5814 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5815 int i;
5816 u32 readval;
5817
5818 /* Set BIT30 of Misc Control Register */
5819 /* (Local Control Register 0x50) to force reset of USC. */
5820
5821 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5822 u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
5823
5824 info->misc_ctrl_value |= BIT30;
5825 *MiscCtrl = info->misc_ctrl_value;
5826
5827 /*
5828 * Force at least 170ns delay before clearing
5829 * reset bit. Each read from LCR takes at least
5830 * 30ns so 10 times for 300ns to be safe.
5831 */
5832 for(i=0;i<10;i++)
5833 readval = *MiscCtrl;
5834
5835 info->misc_ctrl_value &= ~BIT30;
5836 *MiscCtrl = info->misc_ctrl_value;
5837
5838 *LCR0BRDR = BUS_DESCRIPTOR(
5839 1, // Write Strobe Hold (0-3)
5840 2, // Write Strobe Delay (0-3)
5841 2, // Read Strobe Delay (0-3)
5842 0, // NWDD (Write data-data) (0-3)
5843 4, // NWAD (Write Addr-data) (0-31)
5844 0, // NXDA (Read/Write Data-Addr) (0-3)
5845 0, // NRDD (Read Data-Data) (0-3)
5846 5 // NRAD (Read Addr-Data) (0-31)
5847 );
5848 } else {
5849 /* do HW reset */
5850 outb( 0,info->io_base + 8 );
5851 }
5852
5853 info->mbre_bit = 0;
5854 info->loopback_bits = 0;
5855 info->usc_idle_mode = 0;
5856
5857 /*
5858 * Program the Bus Configuration Register (BCR)
5859 *
5860 * <15> 0 Don't use separate address
5861 * <14..6> 0 reserved
5862 * <5..4> 00 IAckmode = Default, don't care
5863 * <3> 1 Bus Request Totem Pole output
5864 * <2> 1 Use 16 Bit data bus
5865 * <1> 0 IRQ Totem Pole output
5866 * <0> 0 Don't Shift Right Addr
5867 *
5868 * 0000 0000 0000 1100 = 0x000c
5869 *
5870 * By writing to io_base + SDPIN the Wait/Ack pin is
5871 * programmed to work as a Wait pin.
5872 */
5873
5874 outw( 0x000c,info->io_base + SDPIN );
5875
5876
5877 outw( 0,info->io_base );
5878 outw( 0,info->io_base + CCAR );
5879
5880 /* select little endian byte ordering */
5881 usc_RTCmd( info, RTCmd_SelectLittleEndian );
5882
5883
5884 /* Port Control Register (PCR)
5885 *
5886 * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
5887 * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
5888 * <11..10> 00 Port 5 is Input (No Connect, Don't Care)
5889 * <9..8> 00 Port 4 is Input (No Connect, Don't Care)
5890 * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
5891 * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
5892 * <3..2> 01 Port 1 is Input (Dedicated RxC)
5893 * <1..0> 01 Port 0 is Input (Dedicated TxC)
5894 *
5895 * 1111 0000 1111 0101 = 0xf0f5
5896 */
5897
5898 usc_OutReg( info, PCR, 0xf0f5 );
5899
5900
5901 /*
5902 * Input/Output Control Register
5903 *
5904 * <15..14> 00 CTS is active low input
5905 * <13..12> 00 DCD is active low input
5906 * <11..10> 00 TxREQ pin is input (DSR)
5907 * <9..8> 00 RxREQ pin is input (RI)
5908 * <7..6> 00 TxD is output (Transmit Data)
5909 * <5..3> 000 TxC Pin in Input (14.7456MHz Clock)
5910 * <2..0> 100 RxC is Output (drive with BRG0)
5911 *
5912 * 0000 0000 0000 0100 = 0x0004
5913 */
5914
5915 usc_OutReg( info, IOCR, 0x0004 );
5916
5917} /* end of usc_reset() */
5918
5919/* usc_set_async_mode()
5920 *
5921 * Program adapter for asynchronous communications.
5922 *
5923 * Arguments: info pointer to device instance data
5924 * Return Value: None
5925 */
5926static void usc_set_async_mode( struct mgsl_struct *info )
5927{
5928 u16 RegValue;
5929
5930 /* disable interrupts while programming USC */
5931 usc_DisableMasterIrqBit( info );
5932
5933 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5934 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5935
5936 usc_loopback_frame( info );
5937
5938 /* Channel mode Register (CMR)
5939 *
5940 * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit
5941 * <13..12> 00 00 = 16X Clock
5942 * <11..8> 0000 Transmitter mode = Asynchronous
5943 * <7..6> 00 reserved?
5944 * <5..4> 00 Rx Sub modes, 00 = 16X Clock
5945 * <3..0> 0000 Receiver mode = Asynchronous
5946 *
5947 * 0000 0000 0000 0000 = 0x0
5948 */
5949
5950 RegValue = 0;
5951 if ( info->params.stop_bits != 1 )
5952 RegValue |= BIT14;
5953 usc_OutReg( info, CMR, RegValue );
5954
5955
5956 /* Receiver mode Register (RMR)
5957 *
5958 * <15..13> 000 encoding = None
5959 * <12..08> 00000 reserved (Sync Only)
5960 * <7..6> 00 Even parity
5961 * <5> 0 parity disabled
5962 * <4..2> 000 Receive Char Length = 8 bits
5963 * <1..0> 00 Disable Receiver
5964 *
5965 * 0000 0000 0000 0000 = 0x0
5966 */
5967
5968 RegValue = 0;
5969
5970 if ( info->params.data_bits != 8 )
5971 RegValue |= BIT4+BIT3+BIT2;
5972
5973 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5974 RegValue |= BIT5;
5975 if ( info->params.parity != ASYNC_PARITY_ODD )
5976 RegValue |= BIT6;
5977 }
5978
5979 usc_OutReg( info, RMR, RegValue );
5980
5981
5982 /* Set IRQ trigger level */
5983
5984 usc_RCmd( info, RCmd_SelectRicrIntLevel );
5985
5986
5987 /* Receive Interrupt Control Register (RICR)
5988 *
5989 * <15..8> ? RxFIFO IRQ Request Level
5990 *
5991 * Note: For async mode the receive FIFO level must be set
Alexey Dobriyan7f927fc2006-03-28 01:56:53 -08005992 * to 0 to avoid the situation where the FIFO contains fewer bytes
Linus Torvalds1da177e2005-04-16 15:20:36 -07005993 * than the trigger level and no more data is expected.
5994 *
5995 * <7> 0 Exited Hunt IA (Interrupt Arm)
5996 * <6> 0 Idle Received IA
5997 * <5> 0 Break/Abort IA
5998 * <4> 0 Rx Bound IA
5999 * <3> 0 Queued status reflects oldest byte in FIFO
6000 * <2> 0 Abort/PE IA
6001 * <1> 0 Rx Overrun IA
6002 * <0> 0 Select TC0 value for readback
6003 *
6004 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
6005 */
6006
6007 usc_OutReg( info, RICR, 0x0000 );
6008
6009 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
6010 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
6011
6012
6013 /* Transmit mode Register (TMR)
6014 *
6015 * <15..13> 000 encoding = None
6016 * <12..08> 00000 reserved (Sync Only)
6017 * <7..6> 00 Transmit parity Even
6018 * <5> 0 Transmit parity Disabled
6019 * <4..2> 000 Tx Char Length = 8 bits
6020 * <1..0> 00 Disable Transmitter
6021 *
6022 * 0000 0000 0000 0000 = 0x0
6023 */
6024
6025 RegValue = 0;
6026
6027 if ( info->params.data_bits != 8 )
6028 RegValue |= BIT4+BIT3+BIT2;
6029
6030 if ( info->params.parity != ASYNC_PARITY_NONE ) {
6031 RegValue |= BIT5;
6032 if ( info->params.parity != ASYNC_PARITY_ODD )
6033 RegValue |= BIT6;
6034 }
6035
6036 usc_OutReg( info, TMR, RegValue );
6037
6038 usc_set_txidle( info );
6039
6040
6041 /* Set IRQ trigger level */
6042
6043 usc_TCmd( info, TCmd_SelectTicrIntLevel );
6044
6045
6046 /* Transmit Interrupt Control Register (TICR)
6047 *
6048 * <15..8> ? Transmit FIFO IRQ Level
6049 * <7> 0 Present IA (Interrupt Arm)
6050 * <6> 1 Idle Sent IA
6051 * <5> 0 Abort Sent IA
6052 * <4> 0 EOF/EOM Sent IA
6053 * <3> 0 CRC Sent IA
6054 * <2> 0 1 = Wait for SW Trigger to Start Frame
6055 * <1> 0 Tx Underrun IA
6056 * <0> 0 TC0 constant on read back
6057 *
6058 * 0000 0000 0100 0000 = 0x0040
6059 */
6060
6061 usc_OutReg( info, TICR, 0x1f40 );
6062
6063 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
6064 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
6065
6066 usc_enable_async_clock( info, info->params.data_rate );
6067
6068
6069 /* Channel Control/status Register (CCSR)
6070 *
6071 * <15> X RCC FIFO Overflow status (RO)
6072 * <14> X RCC FIFO Not Empty status (RO)
6073 * <13> 0 1 = Clear RCC FIFO (WO)
6074 * <12> X DPLL in Sync status (RO)
6075 * <11> X DPLL 2 Missed Clocks status (RO)
6076 * <10> X DPLL 1 Missed Clock status (RO)
6077 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
6078 * <7> X SDLC Loop On status (RO)
6079 * <6> X SDLC Loop Send status (RO)
6080 * <5> 1 Bypass counters for TxClk and RxClk (RW)
6081 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
6082 * <1..0> 00 reserved
6083 *
6084 * 0000 0000 0010 0000 = 0x0020
6085 */
6086
6087 usc_OutReg( info, CCSR, 0x0020 );
6088
6089 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6090 RECEIVE_DATA + RECEIVE_STATUS );
6091
6092 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6093 RECEIVE_DATA + RECEIVE_STATUS );
6094
6095 usc_EnableMasterIrqBit( info );
6096
6097 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6098 /* Enable INTEN (Port 6, Bit12) */
6099 /* This connects the IRQ request signal to the ISA bus */
6100 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6101 }
6102
Paul Fulghum7c1fff52005-09-09 13:02:14 -07006103 if (info->params.loopback) {
6104 info->loopback_bits = 0x300;
6105 outw(0x0300, info->io_base + CCAR);
6106 }
6107
Linus Torvalds1da177e2005-04-16 15:20:36 -07006108} /* end of usc_set_async_mode() */
6109
6110/* usc_loopback_frame()
6111 *
6112 * Loop back a small (2 byte) dummy SDLC frame.
6113 * Interrupts and DMA are NOT used. The purpose of this is to
6114 * clear any 'stale' status info left over from running in async mode.
6115 *
6116 * The 16C32 shows the strange behaviour of marking the 1st
6117 * received SDLC frame with a CRC error even when there is no
6118 * CRC error. To get around this a small dummy from of 2 bytes
6119 * is looped back when switching from async to sync mode.
6120 *
6121 * Arguments: info pointer to device instance data
6122 * Return Value: None
6123 */
6124static void usc_loopback_frame( struct mgsl_struct *info )
6125{
6126 int i;
6127 unsigned long oldmode = info->params.mode;
6128
6129 info->params.mode = MGSL_MODE_HDLC;
6130
6131 usc_DisableMasterIrqBit( info );
6132
6133 usc_set_sdlc_mode( info );
6134 usc_enable_loopback( info, 1 );
6135
6136 /* Write 16-bit Time Constant for BRG0 */
6137 usc_OutReg( info, TC0R, 0 );
6138
6139 /* Channel Control Register (CCR)
6140 *
6141 * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
6142 * <13> 0 Trigger Tx on SW Command Disabled
6143 * <12> 0 Flag Preamble Disabled
6144 * <11..10> 00 Preamble Length = 8-Bits
6145 * <9..8> 01 Preamble Pattern = flags
6146 * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs)
6147 * <5> 0 Trigger Rx on SW Command Disabled
6148 * <4..0> 0 reserved
6149 *
6150 * 0000 0001 0000 0000 = 0x0100
6151 */
6152
6153 usc_OutReg( info, CCR, 0x0100 );
6154
6155 /* SETUP RECEIVER */
6156 usc_RTCmd( info, RTCmd_PurgeRxFifo );
6157 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
6158
6159 /* SETUP TRANSMITTER */
6160 /* Program the Transmit Character Length Register (TCLR) */
6161 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
6162 usc_OutReg( info, TCLR, 2 );
6163 usc_RTCmd( info, RTCmd_PurgeTxFifo );
6164
6165 /* unlatch Tx status bits, and start transmit channel. */
6166 usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
6167 outw(0,info->io_base + DATAREG);
6168
6169 /* ENABLE TRANSMITTER */
6170 usc_TCmd( info, TCmd_SendFrame );
6171 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
6172
6173 /* WAIT FOR RECEIVE COMPLETE */
6174 for (i=0 ; i<1000 ; i++)
6175 if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1))
6176 break;
6177
6178 /* clear Internal Data loopback mode */
6179 usc_enable_loopback(info, 0);
6180
6181 usc_EnableMasterIrqBit(info);
6182
6183 info->params.mode = oldmode;
6184
6185} /* end of usc_loopback_frame() */
6186
6187/* usc_set_sync_mode() Programs the USC for SDLC communications.
6188 *
6189 * Arguments: info pointer to adapter info structure
6190 * Return Value: None
6191 */
6192static void usc_set_sync_mode( struct mgsl_struct *info )
6193{
6194 usc_loopback_frame( info );
6195 usc_set_sdlc_mode( info );
6196
6197 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6198 /* Enable INTEN (Port 6, Bit12) */
6199 /* This connects the IRQ request signal to the ISA bus */
6200 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6201 }
6202
6203 usc_enable_aux_clock(info, info->params.clock_speed);
6204
6205 if (info->params.loopback)
6206 usc_enable_loopback(info,1);
6207
6208} /* end of mgsl_set_sync_mode() */
6209
6210/* usc_set_txidle() Set the HDLC idle mode for the transmitter.
6211 *
6212 * Arguments: info pointer to device instance data
6213 * Return Value: None
6214 */
6215static void usc_set_txidle( struct mgsl_struct *info )
6216{
6217 u16 usc_idle_mode = IDLEMODE_FLAGS;
6218
6219 /* Map API idle mode to USC register bits */
6220
6221 switch( info->idle_mode ){
6222 case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break;
6223 case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
6224 case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break;
6225 case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break;
6226 case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
6227 case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break;
6228 case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break;
6229 }
6230
6231 info->usc_idle_mode = usc_idle_mode;
6232 //usc_OutReg(info, TCSR, usc_idle_mode);
6233 info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */
6234 info->tcsr_value += usc_idle_mode;
6235 usc_OutReg(info, TCSR, info->tcsr_value);
6236
6237 /*
6238 * if SyncLink WAN adapter is running in external sync mode, the
6239 * transmitter has been set to Monosync in order to try to mimic
6240 * a true raw outbound bit stream. Monosync still sends an open/close
6241 * sync char at the start/end of a frame. Try to match those sync
6242 * patterns to the idle mode set here
6243 */
6244 if ( info->params.mode == MGSL_MODE_RAW ) {
6245 unsigned char syncpat = 0;
6246 switch( info->idle_mode ) {
6247 case HDLC_TXIDLE_FLAGS:
6248 syncpat = 0x7e;
6249 break;
6250 case HDLC_TXIDLE_ALT_ZEROS_ONES:
6251 syncpat = 0x55;
6252 break;
6253 case HDLC_TXIDLE_ZEROS:
6254 case HDLC_TXIDLE_SPACE:
6255 syncpat = 0x00;
6256 break;
6257 case HDLC_TXIDLE_ONES:
6258 case HDLC_TXIDLE_MARK:
6259 syncpat = 0xff;
6260 break;
6261 case HDLC_TXIDLE_ALT_MARK_SPACE:
6262 syncpat = 0xaa;
6263 break;
6264 }
6265
6266 usc_SetTransmitSyncChars(info,syncpat,syncpat);
6267 }
6268
6269} /* end of usc_set_txidle() */
6270
6271/* usc_get_serial_signals()
6272 *
6273 * Query the adapter for the state of the V24 status (input) signals.
6274 *
6275 * Arguments: info pointer to device instance data
6276 * Return Value: None
6277 */
6278static void usc_get_serial_signals( struct mgsl_struct *info )
6279{
6280 u16 status;
6281
6282 /* clear all serial signals except DTR and RTS */
6283 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
6284
6285 /* Read the Misc Interrupt status Register (MISR) to get */
6286 /* the V24 status signals. */
6287
6288 status = usc_InReg( info, MISR );
6289
6290 /* set serial signal bits to reflect MISR */
6291
6292 if ( status & MISCSTATUS_CTS )
6293 info->serial_signals |= SerialSignal_CTS;
6294
6295 if ( status & MISCSTATUS_DCD )
6296 info->serial_signals |= SerialSignal_DCD;
6297
6298 if ( status & MISCSTATUS_RI )
6299 info->serial_signals |= SerialSignal_RI;
6300
6301 if ( status & MISCSTATUS_DSR )
6302 info->serial_signals |= SerialSignal_DSR;
6303
6304} /* end of usc_get_serial_signals() */
6305
6306/* usc_set_serial_signals()
6307 *
6308 * Set the state of DTR and RTS based on contents of
6309 * serial_signals member of device extension.
6310 *
6311 * Arguments: info pointer to device instance data
6312 * Return Value: None
6313 */
6314static void usc_set_serial_signals( struct mgsl_struct *info )
6315{
6316 u16 Control;
6317 unsigned char V24Out = info->serial_signals;
6318
6319 /* get the current value of the Port Control Register (PCR) */
6320
6321 Control = usc_InReg( info, PCR );
6322
6323 if ( V24Out & SerialSignal_RTS )
6324 Control &= ~(BIT6);
6325 else
6326 Control |= BIT6;
6327
6328 if ( V24Out & SerialSignal_DTR )
6329 Control &= ~(BIT4);
6330 else
6331 Control |= BIT4;
6332
6333 usc_OutReg( info, PCR, Control );
6334
6335} /* end of usc_set_serial_signals() */
6336
6337/* usc_enable_async_clock()
6338 *
6339 * Enable the async clock at the specified frequency.
6340 *
6341 * Arguments: info pointer to device instance data
6342 * data_rate data rate of clock in bps
6343 * 0 disables the AUX clock.
6344 * Return Value: None
6345 */
6346static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
6347{
6348 if ( data_rate ) {
6349 /*
6350 * Clock mode Control Register (CMCR)
6351 *
6352 * <15..14> 00 counter 1 Disabled
6353 * <13..12> 00 counter 0 Disabled
6354 * <11..10> 11 BRG1 Input is TxC Pin
6355 * <9..8> 11 BRG0 Input is TxC Pin
6356 * <7..6> 01 DPLL Input is BRG1 Output
6357 * <5..3> 100 TxCLK comes from BRG0
6358 * <2..0> 100 RxCLK comes from BRG0
6359 *
6360 * 0000 1111 0110 0100 = 0x0f64
6361 */
6362
6363 usc_OutReg( info, CMCR, 0x0f64 );
6364
6365
6366 /*
6367 * Write 16-bit Time Constant for BRG0
6368 * Time Constant = (ClkSpeed / data_rate) - 1
6369 * ClkSpeed = 921600 (ISA), 691200 (PCI)
6370 */
6371
6372 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6373 usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
6374 else
6375 usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
6376
6377
6378 /*
6379 * Hardware Configuration Register (HCR)
6380 * Clear Bit 1, BRG0 mode = Continuous
6381 * Set Bit 0 to enable BRG0.
6382 */
6383
6384 usc_OutReg( info, HCR,
6385 (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
6386
6387
6388 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
6389
6390 usc_OutReg( info, IOCR,
6391 (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
6392 } else {
6393 /* data rate == 0 so turn off BRG0 */
6394 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
6395 }
6396
6397} /* end of usc_enable_async_clock() */
6398
6399/*
6400 * Buffer Structures:
6401 *
6402 * Normal memory access uses virtual addresses that can make discontiguous
6403 * physical memory pages appear to be contiguous in the virtual address
6404 * space (the processors memory mapping handles the conversions).
6405 *
6406 * DMA transfers require physically contiguous memory. This is because
6407 * the DMA system controller and DMA bus masters deal with memory using
6408 * only physical addresses.
6409 *
6410 * This causes a problem under Windows NT when large DMA buffers are
6411 * needed. Fragmentation of the nonpaged pool prevents allocations of
6412 * physically contiguous buffers larger than the PAGE_SIZE.
6413 *
6414 * However the 16C32 supports Bus Master Scatter/Gather DMA which
6415 * allows DMA transfers to physically discontiguous buffers. Information
6416 * about each data transfer buffer is contained in a memory structure
6417 * called a 'buffer entry'. A list of buffer entries is maintained
6418 * to track and control the use of the data transfer buffers.
6419 *
6420 * To support this strategy we will allocate sufficient PAGE_SIZE
6421 * contiguous memory buffers to allow for the total required buffer
6422 * space.
6423 *
6424 * The 16C32 accesses the list of buffer entries using Bus Master
6425 * DMA. Control information is read from the buffer entries by the
6426 * 16C32 to control data transfers. status information is written to
6427 * the buffer entries by the 16C32 to indicate the status of completed
6428 * transfers.
6429 *
6430 * The CPU writes control information to the buffer entries to control
6431 * the 16C32 and reads status information from the buffer entries to
6432 * determine information about received and transmitted frames.
6433 *
6434 * Because the CPU and 16C32 (adapter) both need simultaneous access
6435 * to the buffer entries, the buffer entry memory is allocated with
6436 * HalAllocateCommonBuffer(). This restricts the size of the buffer
6437 * entry list to PAGE_SIZE.
6438 *
6439 * The actual data buffers on the other hand will only be accessed
6440 * by the CPU or the adapter but not by both simultaneously. This allows
6441 * Scatter/Gather packet based DMA procedures for using physically
6442 * discontiguous pages.
6443 */
6444
6445/*
6446 * mgsl_reset_tx_dma_buffers()
6447 *
6448 * Set the count for all transmit buffers to 0 to indicate the
6449 * buffer is available for use and set the current buffer to the
6450 * first buffer. This effectively makes all buffers free and
6451 * discards any data in buffers.
6452 *
6453 * Arguments: info pointer to device instance data
6454 * Return Value: None
6455 */
6456static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
6457{
6458 unsigned int i;
6459
6460 for ( i = 0; i < info->tx_buffer_count; i++ ) {
6461 *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
6462 }
6463
6464 info->current_tx_buffer = 0;
6465 info->start_tx_dma_buffer = 0;
6466 info->tx_dma_buffers_used = 0;
6467
6468 info->get_tx_holding_index = 0;
6469 info->put_tx_holding_index = 0;
6470 info->tx_holding_count = 0;
6471
6472} /* end of mgsl_reset_tx_dma_buffers() */
6473
6474/*
6475 * num_free_tx_dma_buffers()
6476 *
6477 * returns the number of free tx dma buffers available
6478 *
6479 * Arguments: info pointer to device instance data
6480 * Return Value: number of free tx dma buffers
6481 */
6482static int num_free_tx_dma_buffers(struct mgsl_struct *info)
6483{
6484 return info->tx_buffer_count - info->tx_dma_buffers_used;
6485}
6486
6487/*
6488 * mgsl_reset_rx_dma_buffers()
6489 *
6490 * Set the count for all receive buffers to DMABUFFERSIZE
6491 * and set the current buffer to the first buffer. This effectively
6492 * makes all buffers free and discards any data in buffers.
6493 *
6494 * Arguments: info pointer to device instance data
6495 * Return Value: None
6496 */
6497static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
6498{
6499 unsigned int i;
6500
6501 for ( i = 0; i < info->rx_buffer_count; i++ ) {
6502 *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
6503// info->rx_buffer_list[i].count = DMABUFFERSIZE;
6504// info->rx_buffer_list[i].status = 0;
6505 }
6506
6507 info->current_rx_buffer = 0;
6508
6509} /* end of mgsl_reset_rx_dma_buffers() */
6510
6511/*
6512 * mgsl_free_rx_frame_buffers()
6513 *
6514 * Free the receive buffers used by a received SDLC
6515 * frame such that the buffers can be reused.
6516 *
6517 * Arguments:
6518 *
6519 * info pointer to device instance data
6520 * StartIndex index of 1st receive buffer of frame
6521 * EndIndex index of last receive buffer of frame
6522 *
6523 * Return Value: None
6524 */
6525static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
6526{
6527 int Done = 0;
6528 DMABUFFERENTRY *pBufEntry;
6529 unsigned int Index;
6530
6531 /* Starting with 1st buffer entry of the frame clear the status */
6532 /* field and set the count field to DMA Buffer Size. */
6533
6534 Index = StartIndex;
6535
6536 while( !Done ) {
6537 pBufEntry = &(info->rx_buffer_list[Index]);
6538
6539 if ( Index == EndIndex ) {
6540 /* This is the last buffer of the frame! */
6541 Done = 1;
6542 }
6543
6544 /* reset current buffer for reuse */
6545// pBufEntry->status = 0;
6546// pBufEntry->count = DMABUFFERSIZE;
6547 *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
6548
6549 /* advance to next buffer entry in linked list */
6550 Index++;
6551 if ( Index == info->rx_buffer_count )
6552 Index = 0;
6553 }
6554
6555 /* set current buffer to next buffer after last buffer of frame */
6556 info->current_rx_buffer = Index;
6557
6558} /* end of free_rx_frame_buffers() */
6559
6560/* mgsl_get_rx_frame()
6561 *
6562 * This function attempts to return a received SDLC frame from the
6563 * receive DMA buffers. Only frames received without errors are returned.
6564 *
6565 * Arguments: info pointer to device extension
6566 * Return Value: 1 if frame returned, otherwise 0
6567 */
6568static int mgsl_get_rx_frame(struct mgsl_struct *info)
6569{
6570 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
6571 unsigned short status;
6572 DMABUFFERENTRY *pBufEntry;
6573 unsigned int framesize = 0;
6574 int ReturnCode = 0;
6575 unsigned long flags;
6576 struct tty_struct *tty = info->tty;
6577 int return_frame = 0;
6578
6579 /*
6580 * current_rx_buffer points to the 1st buffer of the next available
6581 * receive frame. To find the last buffer of the frame look for
6582 * a non-zero status field in the buffer entries. (The status
6583 * field is set by the 16C32 after completing a receive frame.
6584 */
6585
6586 StartIndex = EndIndex = info->current_rx_buffer;
6587
6588 while( !info->rx_buffer_list[EndIndex].status ) {
6589 /*
6590 * If the count field of the buffer entry is non-zero then
6591 * this buffer has not been used. (The 16C32 clears the count
6592 * field when it starts using the buffer.) If an unused buffer
6593 * is encountered then there are no frames available.
6594 */
6595
6596 if ( info->rx_buffer_list[EndIndex].count )
6597 goto Cleanup;
6598
6599 /* advance to next buffer entry in linked list */
6600 EndIndex++;
6601 if ( EndIndex == info->rx_buffer_count )
6602 EndIndex = 0;
6603
6604 /* if entire list searched then no frame available */
6605 if ( EndIndex == StartIndex ) {
6606 /* If this occurs then something bad happened,
6607 * all buffers have been 'used' but none mark
6608 * the end of a frame. Reset buffers and receiver.
6609 */
6610
6611 if ( info->rx_enabled ){
6612 spin_lock_irqsave(&info->irq_spinlock,flags);
6613 usc_start_receiver(info);
6614 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6615 }
6616 goto Cleanup;
6617 }
6618 }
6619
6620
6621 /* check status of receive frame */
6622
6623 status = info->rx_buffer_list[EndIndex].status;
6624
6625 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6626 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6627 if ( status & RXSTATUS_SHORT_FRAME )
6628 info->icount.rxshort++;
6629 else if ( status & RXSTATUS_ABORT )
6630 info->icount.rxabort++;
6631 else if ( status & RXSTATUS_OVERRUN )
6632 info->icount.rxover++;
6633 else {
6634 info->icount.rxcrc++;
6635 if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
6636 return_frame = 1;
6637 }
6638 framesize = 0;
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08006639#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07006640 {
6641 struct net_device_stats *stats = hdlc_stats(info->netdev);
6642 stats->rx_errors++;
6643 stats->rx_frame_errors++;
6644 }
6645#endif
6646 } else
6647 return_frame = 1;
6648
6649 if ( return_frame ) {
6650 /* receive frame has no errors, get frame size.
6651 * The frame size is the starting value of the RCC (which was
6652 * set to 0xffff) minus the ending value of the RCC (decremented
6653 * once for each receive character) minus 2 for the 16-bit CRC.
6654 */
6655
6656 framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
6657
6658 /* adjust frame size for CRC if any */
6659 if ( info->params.crc_type == HDLC_CRC_16_CCITT )
6660 framesize -= 2;
6661 else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
6662 framesize -= 4;
6663 }
6664
6665 if ( debug_level >= DEBUG_LEVEL_BH )
6666 printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
6667 __FILE__,__LINE__,info->device_name,status,framesize);
6668
6669 if ( debug_level >= DEBUG_LEVEL_DATA )
6670 mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
6671 min_t(int, framesize, DMABUFFERSIZE),0);
6672
6673 if (framesize) {
6674 if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
6675 ((framesize+1) > info->max_frame_size) ) ||
6676 (framesize > info->max_frame_size) )
6677 info->icount.rxlong++;
6678 else {
6679 /* copy dma buffer(s) to contiguous intermediate buffer */
6680 int copy_count = framesize;
6681 int index = StartIndex;
6682 unsigned char *ptmp = info->intermediate_rxbuffer;
6683
6684 if ( !(status & RXSTATUS_CRC_ERROR))
6685 info->icount.rxok++;
6686
6687 while(copy_count) {
6688 int partial_count;
6689 if ( copy_count > DMABUFFERSIZE )
6690 partial_count = DMABUFFERSIZE;
6691 else
6692 partial_count = copy_count;
6693
6694 pBufEntry = &(info->rx_buffer_list[index]);
6695 memcpy( ptmp, pBufEntry->virt_addr, partial_count );
6696 ptmp += partial_count;
6697 copy_count -= partial_count;
6698
6699 if ( ++index == info->rx_buffer_count )
6700 index = 0;
6701 }
6702
6703 if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
6704 ++framesize;
6705 *ptmp = (status & RXSTATUS_CRC_ERROR ?
6706 RX_CRC_ERROR :
6707 RX_OK);
6708
6709 if ( debug_level >= DEBUG_LEVEL_DATA )
6710 printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
6711 __FILE__,__LINE__,info->device_name,
6712 *ptmp);
6713 }
6714
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08006715#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07006716 if (info->netcount)
6717 hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
6718 else
6719#endif
6720 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6721 }
6722 }
6723 /* Free the buffers used by this frame. */
6724 mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
6725
6726 ReturnCode = 1;
6727
6728Cleanup:
6729
6730 if ( info->rx_enabled && info->rx_overflow ) {
6731 /* The receiver needs to restarted because of
6732 * a receive overflow (buffer or FIFO). If the
6733 * receive buffers are now empty, then restart receiver.
6734 */
6735
6736 if ( !info->rx_buffer_list[EndIndex].status &&
6737 info->rx_buffer_list[EndIndex].count ) {
6738 spin_lock_irqsave(&info->irq_spinlock,flags);
6739 usc_start_receiver(info);
6740 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6741 }
6742 }
6743
6744 return ReturnCode;
6745
6746} /* end of mgsl_get_rx_frame() */
6747
6748/* mgsl_get_raw_rx_frame()
6749 *
6750 * This function attempts to return a received frame from the
6751 * receive DMA buffers when running in external loop mode. In this mode,
6752 * we will return at most one DMABUFFERSIZE frame to the application.
6753 * The USC receiver is triggering off of DCD going active to start a new
6754 * frame, and DCD going inactive to terminate the frame (similar to
6755 * processing a closing flag character).
6756 *
6757 * In this routine, we will return DMABUFFERSIZE "chunks" at a time.
6758 * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
6759 * status field and the RCC field will indicate the length of the
6760 * entire received frame. We take this RCC field and get the modulus
6761 * of RCC and DMABUFFERSIZE to determine if number of bytes in the
6762 * last Rx DMA buffer and return that last portion of the frame.
6763 *
6764 * Arguments: info pointer to device extension
6765 * Return Value: 1 if frame returned, otherwise 0
6766 */
6767static int mgsl_get_raw_rx_frame(struct mgsl_struct *info)
6768{
6769 unsigned int CurrentIndex, NextIndex;
6770 unsigned short status;
6771 DMABUFFERENTRY *pBufEntry;
6772 unsigned int framesize = 0;
6773 int ReturnCode = 0;
6774 unsigned long flags;
6775 struct tty_struct *tty = info->tty;
6776
6777 /*
6778 * current_rx_buffer points to the 1st buffer of the next available
6779 * receive frame. The status field is set by the 16C32 after
6780 * completing a receive frame. If the status field of this buffer
6781 * is zero, either the USC is still filling this buffer or this
6782 * is one of a series of buffers making up a received frame.
6783 *
6784 * If the count field of this buffer is zero, the USC is either
6785 * using this buffer or has used this buffer. Look at the count
6786 * field of the next buffer. If that next buffer's count is
6787 * non-zero, the USC is still actively using the current buffer.
6788 * Otherwise, if the next buffer's count field is zero, the
6789 * current buffer is complete and the USC is using the next
6790 * buffer.
6791 */
6792 CurrentIndex = NextIndex = info->current_rx_buffer;
6793 ++NextIndex;
6794 if ( NextIndex == info->rx_buffer_count )
6795 NextIndex = 0;
6796
6797 if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
6798 (info->rx_buffer_list[CurrentIndex].count == 0 &&
6799 info->rx_buffer_list[NextIndex].count == 0)) {
6800 /*
6801 * Either the status field of this dma buffer is non-zero
6802 * (indicating the last buffer of a receive frame) or the next
6803 * buffer is marked as in use -- implying this buffer is complete
6804 * and an intermediate buffer for this received frame.
6805 */
6806
6807 status = info->rx_buffer_list[CurrentIndex].status;
6808
6809 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6810 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6811 if ( status & RXSTATUS_SHORT_FRAME )
6812 info->icount.rxshort++;
6813 else if ( status & RXSTATUS_ABORT )
6814 info->icount.rxabort++;
6815 else if ( status & RXSTATUS_OVERRUN )
6816 info->icount.rxover++;
6817 else
6818 info->icount.rxcrc++;
6819 framesize = 0;
6820 } else {
6821 /*
6822 * A receive frame is available, get frame size and status.
6823 *
6824 * The frame size is the starting value of the RCC (which was
6825 * set to 0xffff) minus the ending value of the RCC (decremented
6826 * once for each receive character) minus 2 or 4 for the 16-bit
6827 * or 32-bit CRC.
6828 *
6829 * If the status field is zero, this is an intermediate buffer.
6830 * It's size is 4K.
6831 *
6832 * If the DMA Buffer Entry's Status field is non-zero, the
6833 * receive operation completed normally (ie: DCD dropped). The
6834 * RCC field is valid and holds the received frame size.
6835 * It is possible that the RCC field will be zero on a DMA buffer
6836 * entry with a non-zero status. This can occur if the total
6837 * frame size (number of bytes between the time DCD goes active
6838 * to the time DCD goes inactive) exceeds 65535 bytes. In this
6839 * case the 16C32 has underrun on the RCC count and appears to
6840 * stop updating this counter to let us know the actual received
6841 * frame size. If this happens (non-zero status and zero RCC),
6842 * simply return the entire RxDMA Buffer
6843 */
6844 if ( status ) {
6845 /*
6846 * In the event that the final RxDMA Buffer is
6847 * terminated with a non-zero status and the RCC
6848 * field is zero, we interpret this as the RCC
6849 * having underflowed (received frame > 65535 bytes).
6850 *
6851 * Signal the event to the user by passing back
6852 * a status of RxStatus_CrcError returning the full
6853 * buffer and let the app figure out what data is
6854 * actually valid
6855 */
6856 if ( info->rx_buffer_list[CurrentIndex].rcc )
6857 framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
6858 else
6859 framesize = DMABUFFERSIZE;
6860 }
6861 else
6862 framesize = DMABUFFERSIZE;
6863 }
6864
6865 if ( framesize > DMABUFFERSIZE ) {
6866 /*
6867 * if running in raw sync mode, ISR handler for
6868 * End Of Buffer events terminates all buffers at 4K.
6869 * If this frame size is said to be >4K, get the
6870 * actual number of bytes of the frame in this buffer.
6871 */
6872 framesize = framesize % DMABUFFERSIZE;
6873 }
6874
6875
6876 if ( debug_level >= DEBUG_LEVEL_BH )
6877 printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
6878 __FILE__,__LINE__,info->device_name,status,framesize);
6879
6880 if ( debug_level >= DEBUG_LEVEL_DATA )
6881 mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
6882 min_t(int, framesize, DMABUFFERSIZE),0);
6883
6884 if (framesize) {
6885 /* copy dma buffer(s) to contiguous intermediate buffer */
6886 /* NOTE: we never copy more than DMABUFFERSIZE bytes */
6887
6888 pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
6889 memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
6890 info->icount.rxok++;
6891
6892 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6893 }
6894
6895 /* Free the buffers used by this frame. */
6896 mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
6897
6898 ReturnCode = 1;
6899 }
6900
6901
6902 if ( info->rx_enabled && info->rx_overflow ) {
6903 /* The receiver needs to restarted because of
6904 * a receive overflow (buffer or FIFO). If the
6905 * receive buffers are now empty, then restart receiver.
6906 */
6907
6908 if ( !info->rx_buffer_list[CurrentIndex].status &&
6909 info->rx_buffer_list[CurrentIndex].count ) {
6910 spin_lock_irqsave(&info->irq_spinlock,flags);
6911 usc_start_receiver(info);
6912 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6913 }
6914 }
6915
6916 return ReturnCode;
6917
6918} /* end of mgsl_get_raw_rx_frame() */
6919
6920/* mgsl_load_tx_dma_buffer()
6921 *
6922 * Load the transmit DMA buffer with the specified data.
6923 *
6924 * Arguments:
6925 *
6926 * info pointer to device extension
6927 * Buffer pointer to buffer containing frame to load
6928 * BufferSize size in bytes of frame in Buffer
6929 *
6930 * Return Value: None
6931 */
6932static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
6933 const char *Buffer, unsigned int BufferSize)
6934{
6935 unsigned short Copycount;
6936 unsigned int i = 0;
6937 DMABUFFERENTRY *pBufEntry;
6938
6939 if ( debug_level >= DEBUG_LEVEL_DATA )
6940 mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
6941
6942 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
6943 /* set CMR:13 to start transmit when
6944 * next GoAhead (abort) is received
6945 */
6946 info->cmr_value |= BIT13;
6947 }
6948
6949 /* begin loading the frame in the next available tx dma
6950 * buffer, remember it's starting location for setting
6951 * up tx dma operation
6952 */
6953 i = info->current_tx_buffer;
6954 info->start_tx_dma_buffer = i;
6955
6956 /* Setup the status and RCC (Frame Size) fields of the 1st */
6957 /* buffer entry in the transmit DMA buffer list. */
6958
6959 info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
6960 info->tx_buffer_list[i].rcc = BufferSize;
6961 info->tx_buffer_list[i].count = BufferSize;
6962
6963 /* Copy frame data from 1st source buffer to the DMA buffers. */
6964 /* The frame data may span multiple DMA buffers. */
6965
6966 while( BufferSize ){
6967 /* Get a pointer to next DMA buffer entry. */
6968 pBufEntry = &info->tx_buffer_list[i++];
6969
6970 if ( i == info->tx_buffer_count )
6971 i=0;
6972
6973 /* Calculate the number of bytes that can be copied from */
6974 /* the source buffer to this DMA buffer. */
6975 if ( BufferSize > DMABUFFERSIZE )
6976 Copycount = DMABUFFERSIZE;
6977 else
6978 Copycount = BufferSize;
6979
6980 /* Actually copy data from source buffer to DMA buffer. */
6981 /* Also set the data count for this individual DMA buffer. */
6982 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6983 mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
6984 else
6985 memcpy(pBufEntry->virt_addr, Buffer, Copycount);
6986
6987 pBufEntry->count = Copycount;
6988
6989 /* Advance source pointer and reduce remaining data count. */
6990 Buffer += Copycount;
6991 BufferSize -= Copycount;
6992
6993 ++info->tx_dma_buffers_used;
6994 }
6995
6996 /* remember next available tx dma buffer */
6997 info->current_tx_buffer = i;
6998
6999} /* end of mgsl_load_tx_dma_buffer() */
7000
7001/*
7002 * mgsl_register_test()
7003 *
7004 * Performs a register test of the 16C32.
7005 *
7006 * Arguments: info pointer to device instance data
7007 * Return Value: TRUE if test passed, otherwise FALSE
7008 */
7009static BOOLEAN mgsl_register_test( struct mgsl_struct *info )
7010{
7011 static unsigned short BitPatterns[] =
7012 { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
Tobias Klauserfe971072006-01-09 20:54:02 -08007013 static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007014 unsigned int i;
7015 BOOLEAN rc = TRUE;
7016 unsigned long flags;
7017
7018 spin_lock_irqsave(&info->irq_spinlock,flags);
7019 usc_reset(info);
7020
7021 /* Verify the reset state of some registers. */
7022
7023 if ( (usc_InReg( info, SICR ) != 0) ||
7024 (usc_InReg( info, IVR ) != 0) ||
7025 (usc_InDmaReg( info, DIVR ) != 0) ){
7026 rc = FALSE;
7027 }
7028
7029 if ( rc == TRUE ){
7030 /* Write bit patterns to various registers but do it out of */
7031 /* sync, then read back and verify values. */
7032
7033 for ( i = 0 ; i < Patterncount ; i++ ) {
7034 usc_OutReg( info, TC0R, BitPatterns[i] );
7035 usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
7036 usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
7037 usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
7038 usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] );
7039 usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
7040
7041 if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
7042 (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
7043 (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
7044 (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
7045 (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) ||
7046 (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
7047 rc = FALSE;
7048 break;
7049 }
7050 }
7051 }
7052
7053 usc_reset(info);
7054 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7055
7056 return rc;
7057
7058} /* end of mgsl_register_test() */
7059
7060/* mgsl_irq_test() Perform interrupt test of the 16C32.
7061 *
7062 * Arguments: info pointer to device instance data
7063 * Return Value: TRUE if test passed, otherwise FALSE
7064 */
7065static BOOLEAN mgsl_irq_test( struct mgsl_struct *info )
7066{
7067 unsigned long EndTime;
7068 unsigned long flags;
7069
7070 spin_lock_irqsave(&info->irq_spinlock,flags);
7071 usc_reset(info);
7072
7073 /*
7074 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
7075 * The ISR sets irq_occurred to 1.
7076 */
7077
7078 info->irq_occurred = FALSE;
7079
7080 /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
7081 /* Enable INTEN (Port 6, Bit12) */
7082 /* This connects the IRQ request signal to the ISA bus */
7083 /* on the ISA adapter. This has no effect for the PCI adapter */
7084 usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
7085
7086 usc_EnableMasterIrqBit(info);
7087 usc_EnableInterrupts(info, IO_PIN);
7088 usc_ClearIrqPendingBits(info, IO_PIN);
7089
7090 usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
7091 usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
7092
7093 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7094
7095 EndTime=100;
7096 while( EndTime-- && !info->irq_occurred ) {
7097 msleep_interruptible(10);
7098 }
7099
7100 spin_lock_irqsave(&info->irq_spinlock,flags);
7101 usc_reset(info);
7102 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7103
7104 if ( !info->irq_occurred )
7105 return FALSE;
7106 else
7107 return TRUE;
7108
7109} /* end of mgsl_irq_test() */
7110
7111/* mgsl_dma_test()
7112 *
7113 * Perform a DMA test of the 16C32. A small frame is
7114 * transmitted via DMA from a transmit buffer to a receive buffer
7115 * using single buffer DMA mode.
7116 *
7117 * Arguments: info pointer to device instance data
7118 * Return Value: TRUE if test passed, otherwise FALSE
7119 */
7120static BOOLEAN mgsl_dma_test( struct mgsl_struct *info )
7121{
7122 unsigned short FifoLevel;
7123 unsigned long phys_addr;
7124 unsigned int FrameSize;
7125 unsigned int i;
7126 char *TmpPtr;
7127 BOOLEAN rc = TRUE;
7128 unsigned short status=0;
7129 unsigned long EndTime;
7130 unsigned long flags;
7131 MGSL_PARAMS tmp_params;
7132
7133 /* save current port options */
7134 memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
7135 /* load default port options */
7136 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
7137
7138#define TESTFRAMESIZE 40
7139
7140 spin_lock_irqsave(&info->irq_spinlock,flags);
7141
7142 /* setup 16C32 for SDLC DMA transfer mode */
7143
7144 usc_reset(info);
7145 usc_set_sdlc_mode(info);
7146 usc_enable_loopback(info,1);
7147
7148 /* Reprogram the RDMR so that the 16C32 does NOT clear the count
7149 * field of the buffer entry after fetching buffer address. This
7150 * way we can detect a DMA failure for a DMA read (which should be
7151 * non-destructive to system memory) before we try and write to
7152 * memory (where a failure could corrupt system memory).
7153 */
7154
7155 /* Receive DMA mode Register (RDMR)
7156 *
7157 * <15..14> 11 DMA mode = Linked List Buffer mode
7158 * <13> 1 RSBinA/L = store Rx status Block in List entry
7159 * <12> 0 1 = Clear count of List Entry after fetching
7160 * <11..10> 00 Address mode = Increment
7161 * <9> 1 Terminate Buffer on RxBound
7162 * <8> 0 Bus Width = 16bits
7163 * <7..0> ? status Bits (write as 0s)
7164 *
7165 * 1110 0010 0000 0000 = 0xe200
7166 */
7167
7168 usc_OutDmaReg( info, RDMR, 0xe200 );
7169
7170 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7171
7172
7173 /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
7174
7175 FrameSize = TESTFRAMESIZE;
7176
7177 /* setup 1st transmit buffer entry: */
7178 /* with frame size and transmit control word */
7179
7180 info->tx_buffer_list[0].count = FrameSize;
7181 info->tx_buffer_list[0].rcc = FrameSize;
7182 info->tx_buffer_list[0].status = 0x4000;
7183
7184 /* build a transmit frame in 1st transmit DMA buffer */
7185
7186 TmpPtr = info->tx_buffer_list[0].virt_addr;
7187 for (i = 0; i < FrameSize; i++ )
7188 *TmpPtr++ = i;
7189
7190 /* setup 1st receive buffer entry: */
7191 /* clear status, set max receive buffer size */
7192
7193 info->rx_buffer_list[0].status = 0;
7194 info->rx_buffer_list[0].count = FrameSize + 4;
7195
7196 /* zero out the 1st receive buffer */
7197
7198 memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
7199
7200 /* Set count field of next buffer entries to prevent */
7201 /* 16C32 from using buffers after the 1st one. */
7202
7203 info->tx_buffer_list[1].count = 0;
7204 info->rx_buffer_list[1].count = 0;
7205
7206
7207 /***************************/
7208 /* Program 16C32 receiver. */
7209 /***************************/
7210
7211 spin_lock_irqsave(&info->irq_spinlock,flags);
7212
7213 /* setup DMA transfers */
7214 usc_RTCmd( info, RTCmd_PurgeRxFifo );
7215
7216 /* program 16C32 receiver with physical address of 1st DMA buffer entry */
7217 phys_addr = info->rx_buffer_list[0].phys_entry;
7218 usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
7219 usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
7220
7221 /* Clear the Rx DMA status bits (read RDMR) and start channel */
7222 usc_InDmaReg( info, RDMR );
7223 usc_DmaCmd( info, DmaCmd_InitRxChannel );
7224
7225 /* Enable Receiver (RMR <1..0> = 10) */
7226 usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
7227
7228 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7229
7230
7231 /*************************************************************/
7232 /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
7233 /*************************************************************/
7234
7235 /* Wait 100ms for interrupt. */
7236 EndTime = jiffies + msecs_to_jiffies(100);
7237
7238 for(;;) {
7239 if (time_after(jiffies, EndTime)) {
7240 rc = FALSE;
7241 break;
7242 }
7243
7244 spin_lock_irqsave(&info->irq_spinlock,flags);
7245 status = usc_InDmaReg( info, RDMR );
7246 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7247
7248 if ( !(status & BIT4) && (status & BIT5) ) {
7249 /* INITG (BIT 4) is inactive (no entry read in progress) AND */
7250 /* BUSY (BIT 5) is active (channel still active). */
7251 /* This means the buffer entry read has completed. */
7252 break;
7253 }
7254 }
7255
7256
7257 /******************************/
7258 /* Program 16C32 transmitter. */
7259 /******************************/
7260
7261 spin_lock_irqsave(&info->irq_spinlock,flags);
7262
7263 /* Program the Transmit Character Length Register (TCLR) */
7264 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
7265
7266 usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
7267 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7268
7269 /* Program the address of the 1st DMA Buffer Entry in linked list */
7270
7271 phys_addr = info->tx_buffer_list[0].phys_entry;
7272 usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
7273 usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
7274
7275 /* unlatch Tx status bits, and start transmit channel. */
7276
7277 usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
7278 usc_DmaCmd( info, DmaCmd_InitTxChannel );
7279
7280 /* wait for DMA controller to fill transmit FIFO */
7281
7282 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
7283
7284 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7285
7286
7287 /**********************************/
7288 /* WAIT FOR TRANSMIT FIFO TO FILL */
7289 /**********************************/
7290
7291 /* Wait 100ms */
7292 EndTime = jiffies + msecs_to_jiffies(100);
7293
7294 for(;;) {
7295 if (time_after(jiffies, EndTime)) {
7296 rc = FALSE;
7297 break;
7298 }
7299
7300 spin_lock_irqsave(&info->irq_spinlock,flags);
7301 FifoLevel = usc_InReg(info, TICR) >> 8;
7302 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7303
7304 if ( FifoLevel < 16 )
7305 break;
7306 else
7307 if ( FrameSize < 32 ) {
7308 /* This frame is smaller than the entire transmit FIFO */
7309 /* so wait for the entire frame to be loaded. */
7310 if ( FifoLevel <= (32 - FrameSize) )
7311 break;
7312 }
7313 }
7314
7315
7316 if ( rc == TRUE )
7317 {
7318 /* Enable 16C32 transmitter. */
7319
7320 spin_lock_irqsave(&info->irq_spinlock,flags);
7321
7322 /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
7323 usc_TCmd( info, TCmd_SendFrame );
7324 usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
7325
7326 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7327
7328
7329 /******************************/
7330 /* WAIT FOR TRANSMIT COMPLETE */
7331 /******************************/
7332
7333 /* Wait 100ms */
7334 EndTime = jiffies + msecs_to_jiffies(100);
7335
7336 /* While timer not expired wait for transmit complete */
7337
7338 spin_lock_irqsave(&info->irq_spinlock,flags);
7339 status = usc_InReg( info, TCSR );
7340 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7341
7342 while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) {
7343 if (time_after(jiffies, EndTime)) {
7344 rc = FALSE;
7345 break;
7346 }
7347
7348 spin_lock_irqsave(&info->irq_spinlock,flags);
7349 status = usc_InReg( info, TCSR );
7350 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7351 }
7352 }
7353
7354
7355 if ( rc == TRUE ){
7356 /* CHECK FOR TRANSMIT ERRORS */
7357 if ( status & (BIT5 + BIT1) )
7358 rc = FALSE;
7359 }
7360
7361 if ( rc == TRUE ) {
7362 /* WAIT FOR RECEIVE COMPLETE */
7363
7364 /* Wait 100ms */
7365 EndTime = jiffies + msecs_to_jiffies(100);
7366
7367 /* Wait for 16C32 to write receive status to buffer entry. */
7368 status=info->rx_buffer_list[0].status;
7369 while ( status == 0 ) {
7370 if (time_after(jiffies, EndTime)) {
7371 rc = FALSE;
7372 break;
7373 }
7374 status=info->rx_buffer_list[0].status;
7375 }
7376 }
7377
7378
7379 if ( rc == TRUE ) {
7380 /* CHECK FOR RECEIVE ERRORS */
7381 status = info->rx_buffer_list[0].status;
7382
7383 if ( status & (BIT8 + BIT3 + BIT1) ) {
7384 /* receive error has occurred */
7385 rc = FALSE;
7386 } else {
7387 if ( memcmp( info->tx_buffer_list[0].virt_addr ,
7388 info->rx_buffer_list[0].virt_addr, FrameSize ) ){
7389 rc = FALSE;
7390 }
7391 }
7392 }
7393
7394 spin_lock_irqsave(&info->irq_spinlock,flags);
7395 usc_reset( info );
7396 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7397
7398 /* restore current port options */
7399 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
7400
7401 return rc;
7402
7403} /* end of mgsl_dma_test() */
7404
7405/* mgsl_adapter_test()
7406 *
7407 * Perform the register, IRQ, and DMA tests for the 16C32.
7408 *
7409 * Arguments: info pointer to device instance data
7410 * Return Value: 0 if success, otherwise -ENODEV
7411 */
7412static int mgsl_adapter_test( struct mgsl_struct *info )
7413{
7414 if ( debug_level >= DEBUG_LEVEL_INFO )
7415 printk( "%s(%d):Testing device %s\n",
7416 __FILE__,__LINE__,info->device_name );
7417
7418 if ( !mgsl_register_test( info ) ) {
7419 info->init_error = DiagStatus_AddressFailure;
7420 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
7421 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
7422 return -ENODEV;
7423 }
7424
7425 if ( !mgsl_irq_test( info ) ) {
7426 info->init_error = DiagStatus_IrqFailure;
7427 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
7428 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
7429 return -ENODEV;
7430 }
7431
7432 if ( !mgsl_dma_test( info ) ) {
7433 info->init_error = DiagStatus_DmaFailure;
7434 printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
7435 __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
7436 return -ENODEV;
7437 }
7438
7439 if ( debug_level >= DEBUG_LEVEL_INFO )
7440 printk( "%s(%d):device %s passed diagnostics\n",
7441 __FILE__,__LINE__,info->device_name );
7442
7443 return 0;
7444
7445} /* end of mgsl_adapter_test() */
7446
7447/* mgsl_memory_test()
7448 *
7449 * Test the shared memory on a PCI adapter.
7450 *
7451 * Arguments: info pointer to device instance data
7452 * Return Value: TRUE if test passed, otherwise FALSE
7453 */
7454static BOOLEAN mgsl_memory_test( struct mgsl_struct *info )
7455{
Tobias Klauserfe971072006-01-09 20:54:02 -08007456 static unsigned long BitPatterns[] =
7457 { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
7458 unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007459 unsigned long i;
7460 unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
7461 unsigned long * TestAddr;
7462
7463 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
7464 return TRUE;
7465
7466 TestAddr = (unsigned long *)info->memory_base;
7467
7468 /* Test data lines with test pattern at one location. */
7469
7470 for ( i = 0 ; i < Patterncount ; i++ ) {
7471 *TestAddr = BitPatterns[i];
7472 if ( *TestAddr != BitPatterns[i] )
7473 return FALSE;
7474 }
7475
7476 /* Test address lines with incrementing pattern over */
7477 /* entire address range. */
7478
7479 for ( i = 0 ; i < TestLimit ; i++ ) {
7480 *TestAddr = i * 4;
7481 TestAddr++;
7482 }
7483
7484 TestAddr = (unsigned long *)info->memory_base;
7485
7486 for ( i = 0 ; i < TestLimit ; i++ ) {
7487 if ( *TestAddr != i * 4 )
7488 return FALSE;
7489 TestAddr++;
7490 }
7491
7492 memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
7493
7494 return TRUE;
7495
7496} /* End Of mgsl_memory_test() */
7497
7498
7499/* mgsl_load_pci_memory()
7500 *
7501 * Load a large block of data into the PCI shared memory.
7502 * Use this instead of memcpy() or memmove() to move data
7503 * into the PCI shared memory.
7504 *
7505 * Notes:
7506 *
7507 * This function prevents the PCI9050 interface chip from hogging
7508 * the adapter local bus, which can starve the 16C32 by preventing
7509 * 16C32 bus master cycles.
7510 *
7511 * The PCI9050 documentation says that the 9050 will always release
7512 * control of the local bus after completing the current read
7513 * or write operation.
7514 *
7515 * It appears that as long as the PCI9050 write FIFO is full, the
7516 * PCI9050 treats all of the writes as a single burst transaction
7517 * and will not release the bus. This causes DMA latency problems
7518 * at high speeds when copying large data blocks to the shared
7519 * memory.
7520 *
7521 * This function in effect, breaks the a large shared memory write
7522 * into multiple transations by interleaving a shared memory read
7523 * which will flush the write FIFO and 'complete' the write
7524 * transation. This allows any pending DMA request to gain control
7525 * of the local bus in a timely fasion.
7526 *
7527 * Arguments:
7528 *
7529 * TargetPtr pointer to target address in PCI shared memory
7530 * SourcePtr pointer to source buffer for data
7531 * count count in bytes of data to copy
7532 *
7533 * Return Value: None
7534 */
7535static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
7536 unsigned short count )
7537{
7538 /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
7539#define PCI_LOAD_INTERVAL 64
7540
7541 unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
7542 unsigned short Index;
7543 unsigned long Dummy;
7544
7545 for ( Index = 0 ; Index < Intervalcount ; Index++ )
7546 {
7547 memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
7548 Dummy = *((volatile unsigned long *)TargetPtr);
7549 TargetPtr += PCI_LOAD_INTERVAL;
7550 SourcePtr += PCI_LOAD_INTERVAL;
7551 }
7552
7553 memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
7554
7555} /* End Of mgsl_load_pci_memory() */
7556
7557static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
7558{
7559 int i;
7560 int linecount;
7561 if (xmit)
7562 printk("%s tx data:\n",info->device_name);
7563 else
7564 printk("%s rx data:\n",info->device_name);
7565
7566 while(count) {
7567 if (count > 16)
7568 linecount = 16;
7569 else
7570 linecount = count;
7571
7572 for(i=0;i<linecount;i++)
7573 printk("%02X ",(unsigned char)data[i]);
7574 for(;i<17;i++)
7575 printk(" ");
7576 for(i=0;i<linecount;i++) {
7577 if (data[i]>=040 && data[i]<=0176)
7578 printk("%c",data[i]);
7579 else
7580 printk(".");
7581 }
7582 printk("\n");
7583
7584 data += linecount;
7585 count -= linecount;
7586 }
7587} /* end of mgsl_trace_block() */
7588
7589/* mgsl_tx_timeout()
7590 *
7591 * called when HDLC frame times out
7592 * update stats and do tx completion processing
7593 *
7594 * Arguments: context pointer to device instance data
7595 * Return Value: None
7596 */
7597static void mgsl_tx_timeout(unsigned long context)
7598{
7599 struct mgsl_struct *info = (struct mgsl_struct*)context;
7600 unsigned long flags;
7601
7602 if ( debug_level >= DEBUG_LEVEL_INFO )
7603 printk( "%s(%d):mgsl_tx_timeout(%s)\n",
7604 __FILE__,__LINE__,info->device_name);
7605 if(info->tx_active &&
7606 (info->params.mode == MGSL_MODE_HDLC ||
7607 info->params.mode == MGSL_MODE_RAW) ) {
7608 info->icount.txtimeout++;
7609 }
7610 spin_lock_irqsave(&info->irq_spinlock,flags);
7611 info->tx_active = 0;
7612 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
7613
7614 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
7615 usc_loopmode_cancel_transmit( info );
7616
7617 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7618
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08007619#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07007620 if (info->netcount)
7621 hdlcdev_tx_done(info);
7622 else
7623#endif
7624 mgsl_bh_transmit(info);
7625
7626} /* end of mgsl_tx_timeout() */
7627
7628/* signal that there are no more frames to send, so that
7629 * line is 'released' by echoing RxD to TxD when current
7630 * transmission is complete (or immediately if no tx in progress).
7631 */
7632static int mgsl_loopmode_send_done( struct mgsl_struct * info )
7633{
7634 unsigned long flags;
7635
7636 spin_lock_irqsave(&info->irq_spinlock,flags);
7637 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
7638 if (info->tx_active)
7639 info->loopmode_send_done_requested = TRUE;
7640 else
7641 usc_loopmode_send_done(info);
7642 }
7643 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7644
7645 return 0;
7646}
7647
7648/* release the line by echoing RxD to TxD
7649 * upon completion of a transmit frame
7650 */
7651static void usc_loopmode_send_done( struct mgsl_struct * info )
7652{
7653 info->loopmode_send_done_requested = FALSE;
7654 /* clear CMR:13 to 0 to start echoing RxData to TxData */
7655 info->cmr_value &= ~BIT13;
7656 usc_OutReg(info, CMR, info->cmr_value);
7657}
7658
7659/* abort a transmit in progress while in HDLC LoopMode
7660 */
7661static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
7662{
7663 /* reset tx dma channel and purge TxFifo */
7664 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7665 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
7666 usc_loopmode_send_done( info );
7667}
7668
7669/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
7670 * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
7671 * we must clear CMR:13 to begin repeating TxData to RxData
7672 */
7673static void usc_loopmode_insert_request( struct mgsl_struct * info )
7674{
7675 info->loopmode_insert_requested = TRUE;
7676
7677 /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
7678 * begin repeating TxData on RxData (complete insertion)
7679 */
7680 usc_OutReg( info, RICR,
7681 (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
7682
7683 /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
7684 info->cmr_value |= BIT13;
7685 usc_OutReg(info, CMR, info->cmr_value);
7686}
7687
7688/* return 1 if station is inserted into the loop, otherwise 0
7689 */
7690static int usc_loopmode_active( struct mgsl_struct * info)
7691{
7692 return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
7693}
7694
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08007695#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07007696
7697/**
7698 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
7699 * set encoding and frame check sequence (FCS) options
7700 *
7701 * dev pointer to network device structure
7702 * encoding serial encoding setting
7703 * parity FCS setting
7704 *
7705 * returns 0 if success, otherwise error code
7706 */
7707static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
7708 unsigned short parity)
7709{
7710 struct mgsl_struct *info = dev_to_port(dev);
7711 unsigned char new_encoding;
7712 unsigned short new_crctype;
7713
7714 /* return error if TTY interface open */
7715 if (info->count)
7716 return -EBUSY;
7717
7718 switch (encoding)
7719 {
7720 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
7721 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
7722 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
7723 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
7724 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
7725 default: return -EINVAL;
7726 }
7727
7728 switch (parity)
7729 {
7730 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
7731 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
7732 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
7733 default: return -EINVAL;
7734 }
7735
7736 info->params.encoding = new_encoding;
Alexey Dobriyan53b35312006-03-24 03:16:13 -08007737 info->params.crc_type = new_crctype;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007738
7739 /* if network interface up, reprogram hardware */
7740 if (info->netcount)
7741 mgsl_program_hw(info);
7742
7743 return 0;
7744}
7745
7746/**
7747 * called by generic HDLC layer to send frame
7748 *
7749 * skb socket buffer containing HDLC frame
7750 * dev pointer to network device structure
7751 *
7752 * returns 0 if success, otherwise error code
7753 */
7754static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
7755{
7756 struct mgsl_struct *info = dev_to_port(dev);
7757 struct net_device_stats *stats = hdlc_stats(dev);
7758 unsigned long flags;
7759
7760 if (debug_level >= DEBUG_LEVEL_INFO)
7761 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
7762
7763 /* stop sending until this frame completes */
7764 netif_stop_queue(dev);
7765
7766 /* copy data to device buffers */
7767 info->xmit_cnt = skb->len;
7768 mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
7769
7770 /* update network statistics */
7771 stats->tx_packets++;
7772 stats->tx_bytes += skb->len;
7773
7774 /* done with socket buffer, so free it */
7775 dev_kfree_skb(skb);
7776
7777 /* save start time for transmit timeout detection */
7778 dev->trans_start = jiffies;
7779
7780 /* start hardware transmitter if necessary */
7781 spin_lock_irqsave(&info->irq_spinlock,flags);
7782 if (!info->tx_active)
7783 usc_start_transmitter(info);
7784 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7785
7786 return 0;
7787}
7788
7789/**
7790 * called by network layer when interface enabled
7791 * claim resources and initialize hardware
7792 *
7793 * dev pointer to network device structure
7794 *
7795 * returns 0 if success, otherwise error code
7796 */
7797static int hdlcdev_open(struct net_device *dev)
7798{
7799 struct mgsl_struct *info = dev_to_port(dev);
7800 int rc;
7801 unsigned long flags;
7802
7803 if (debug_level >= DEBUG_LEVEL_INFO)
7804 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
7805
7806 /* generic HDLC layer open processing */
7807 if ((rc = hdlc_open(dev)))
7808 return rc;
7809
7810 /* arbitrate between network and tty opens */
7811 spin_lock_irqsave(&info->netlock, flags);
7812 if (info->count != 0 || info->netcount != 0) {
7813 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
7814 spin_unlock_irqrestore(&info->netlock, flags);
7815 return -EBUSY;
7816 }
7817 info->netcount=1;
7818 spin_unlock_irqrestore(&info->netlock, flags);
7819
7820 /* claim resources and init adapter */
7821 if ((rc = startup(info)) != 0) {
7822 spin_lock_irqsave(&info->netlock, flags);
7823 info->netcount=0;
7824 spin_unlock_irqrestore(&info->netlock, flags);
7825 return rc;
7826 }
7827
7828 /* assert DTR and RTS, apply hardware settings */
7829 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
7830 mgsl_program_hw(info);
7831
7832 /* enable network layer transmit */
7833 dev->trans_start = jiffies;
7834 netif_start_queue(dev);
7835
7836 /* inform generic HDLC layer of current DCD status */
7837 spin_lock_irqsave(&info->irq_spinlock, flags);
7838 usc_get_serial_signals(info);
7839 spin_unlock_irqrestore(&info->irq_spinlock, flags);
Krzysztof Halasafbeff3c2006-07-21 14:44:55 -07007840 if (info->serial_signals & SerialSignal_DCD)
7841 netif_carrier_on(dev);
7842 else
7843 netif_carrier_off(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007844 return 0;
7845}
7846
7847/**
7848 * called by network layer when interface is disabled
7849 * shutdown hardware and release resources
7850 *
7851 * dev pointer to network device structure
7852 *
7853 * returns 0 if success, otherwise error code
7854 */
7855static int hdlcdev_close(struct net_device *dev)
7856{
7857 struct mgsl_struct *info = dev_to_port(dev);
7858 unsigned long flags;
7859
7860 if (debug_level >= DEBUG_LEVEL_INFO)
7861 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
7862
7863 netif_stop_queue(dev);
7864
7865 /* shutdown adapter and release resources */
7866 shutdown(info);
7867
7868 hdlc_close(dev);
7869
7870 spin_lock_irqsave(&info->netlock, flags);
7871 info->netcount=0;
7872 spin_unlock_irqrestore(&info->netlock, flags);
7873
7874 return 0;
7875}
7876
7877/**
7878 * called by network layer to process IOCTL call to network device
7879 *
7880 * dev pointer to network device structure
7881 * ifr pointer to network interface request structure
7882 * cmd IOCTL command code
7883 *
7884 * returns 0 if success, otherwise error code
7885 */
7886static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
7887{
7888 const size_t size = sizeof(sync_serial_settings);
7889 sync_serial_settings new_line;
7890 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
7891 struct mgsl_struct *info = dev_to_port(dev);
7892 unsigned int flags;
7893
7894 if (debug_level >= DEBUG_LEVEL_INFO)
7895 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
7896
7897 /* return error if TTY interface open */
7898 if (info->count)
7899 return -EBUSY;
7900
7901 if (cmd != SIOCWANDEV)
7902 return hdlc_ioctl(dev, ifr, cmd);
7903
7904 switch(ifr->ifr_settings.type) {
7905 case IF_GET_IFACE: /* return current sync_serial_settings */
7906
7907 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
7908 if (ifr->ifr_settings.size < size) {
7909 ifr->ifr_settings.size = size; /* data size wanted */
7910 return -ENOBUFS;
7911 }
7912
7913 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7914 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7915 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7916 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7917
7918 switch (flags){
7919 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
7920 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
7921 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
7922 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
7923 default: new_line.clock_type = CLOCK_DEFAULT;
7924 }
7925
7926 new_line.clock_rate = info->params.clock_speed;
7927 new_line.loopback = info->params.loopback ? 1:0;
7928
7929 if (copy_to_user(line, &new_line, size))
7930 return -EFAULT;
7931 return 0;
7932
7933 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
7934
7935 if(!capable(CAP_NET_ADMIN))
7936 return -EPERM;
7937 if (copy_from_user(&new_line, line, size))
7938 return -EFAULT;
7939
7940 switch (new_line.clock_type)
7941 {
7942 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
7943 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
7944 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
7945 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
7946 case CLOCK_DEFAULT: flags = info->params.flags &
7947 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7948 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7949 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7950 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
7951 default: return -EINVAL;
7952 }
7953
7954 if (new_line.loopback != 0 && new_line.loopback != 1)
7955 return -EINVAL;
7956
7957 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7958 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7959 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7960 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7961 info->params.flags |= flags;
7962
7963 info->params.loopback = new_line.loopback;
7964
7965 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
7966 info->params.clock_speed = new_line.clock_rate;
7967 else
7968 info->params.clock_speed = 0;
7969
7970 /* if network interface up, reprogram hardware */
7971 if (info->netcount)
7972 mgsl_program_hw(info);
7973 return 0;
7974
7975 default:
7976 return hdlc_ioctl(dev, ifr, cmd);
7977 }
7978}
7979
7980/**
7981 * called by network layer when transmit timeout is detected
7982 *
7983 * dev pointer to network device structure
7984 */
7985static void hdlcdev_tx_timeout(struct net_device *dev)
7986{
7987 struct mgsl_struct *info = dev_to_port(dev);
7988 struct net_device_stats *stats = hdlc_stats(dev);
7989 unsigned long flags;
7990
7991 if (debug_level >= DEBUG_LEVEL_INFO)
7992 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
7993
7994 stats->tx_errors++;
7995 stats->tx_aborted_errors++;
7996
7997 spin_lock_irqsave(&info->irq_spinlock,flags);
7998 usc_stop_transmitter(info);
7999 spin_unlock_irqrestore(&info->irq_spinlock,flags);
8000
8001 netif_wake_queue(dev);
8002}
8003
8004/**
8005 * called by device driver when transmit completes
8006 * reenable network layer transmit if stopped
8007 *
8008 * info pointer to device instance information
8009 */
8010static void hdlcdev_tx_done(struct mgsl_struct *info)
8011{
8012 if (netif_queue_stopped(info->netdev))
8013 netif_wake_queue(info->netdev);
8014}
8015
8016/**
8017 * called by device driver when frame received
8018 * pass frame to network layer
8019 *
8020 * info pointer to device instance information
8021 * buf pointer to buffer contianing frame data
8022 * size count of data bytes in buf
8023 */
8024static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
8025{
8026 struct sk_buff *skb = dev_alloc_skb(size);
8027 struct net_device *dev = info->netdev;
8028 struct net_device_stats *stats = hdlc_stats(dev);
8029
8030 if (debug_level >= DEBUG_LEVEL_INFO)
8031 printk("hdlcdev_rx(%s)\n",dev->name);
8032
8033 if (skb == NULL) {
8034 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
8035 stats->rx_dropped++;
8036 return;
8037 }
8038
8039 memcpy(skb_put(skb, size),buf,size);
8040
8041 skb->protocol = hdlc_type_trans(skb, info->netdev);
8042
8043 stats->rx_packets++;
8044 stats->rx_bytes += size;
8045
8046 netif_rx(skb);
8047
8048 info->netdev->last_rx = jiffies;
8049}
8050
8051/**
8052 * called by device driver when adding device instance
8053 * do generic HDLC initialization
8054 *
8055 * info pointer to device instance information
8056 *
8057 * returns 0 if success, otherwise error code
8058 */
8059static int hdlcdev_init(struct mgsl_struct *info)
8060{
8061 int rc;
8062 struct net_device *dev;
8063 hdlc_device *hdlc;
8064
8065 /* allocate and initialize network and HDLC layer objects */
8066
8067 if (!(dev = alloc_hdlcdev(info))) {
8068 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
8069 return -ENOMEM;
8070 }
8071
8072 /* for network layer reporting purposes only */
8073 dev->base_addr = info->io_base;
8074 dev->irq = info->irq_level;
8075 dev->dma = info->dma_level;
8076
8077 /* network layer callbacks and settings */
8078 dev->do_ioctl = hdlcdev_ioctl;
8079 dev->open = hdlcdev_open;
8080 dev->stop = hdlcdev_close;
8081 dev->tx_timeout = hdlcdev_tx_timeout;
8082 dev->watchdog_timeo = 10*HZ;
8083 dev->tx_queue_len = 50;
8084
8085 /* generic HDLC layer callbacks and settings */
8086 hdlc = dev_to_hdlc(dev);
8087 hdlc->attach = hdlcdev_attach;
8088 hdlc->xmit = hdlcdev_xmit;
8089
8090 /* register objects with HDLC layer */
8091 if ((rc = register_hdlc_device(dev))) {
8092 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
8093 free_netdev(dev);
8094 return rc;
8095 }
8096
8097 info->netdev = dev;
8098 return 0;
8099}
8100
8101/**
8102 * called by device driver when removing device instance
8103 * do generic HDLC cleanup
8104 *
8105 * info pointer to device instance information
8106 */
8107static void hdlcdev_exit(struct mgsl_struct *info)
8108{
8109 unregister_hdlc_device(info->netdev);
8110 free_netdev(info->netdev);
8111 info->netdev = NULL;
8112}
8113
8114#endif /* CONFIG_HDLC */
8115
8116
8117static int __devinit synclink_init_one (struct pci_dev *dev,
8118 const struct pci_device_id *ent)
8119{
8120 struct mgsl_struct *info;
8121
8122 if (pci_enable_device(dev)) {
8123 printk("error enabling pci device %p\n", dev);
8124 return -EIO;
8125 }
8126
8127 if (!(info = mgsl_allocate_device())) {
8128 printk("can't allocate device instance data.\n");
8129 return -EIO;
8130 }
8131
8132 /* Copy user configuration info to device instance data */
8133
8134 info->io_base = pci_resource_start(dev, 2);
8135 info->irq_level = dev->irq;
8136 info->phys_memory_base = pci_resource_start(dev, 3);
8137
8138 /* Because veremap only works on page boundaries we must map
8139 * a larger area than is actually implemented for the LCR
8140 * memory range. We map a full page starting at the page boundary.
8141 */
8142 info->phys_lcr_base = pci_resource_start(dev, 0);
8143 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
8144 info->phys_lcr_base &= ~(PAGE_SIZE-1);
8145
8146 info->bus_type = MGSL_BUS_TYPE_PCI;
8147 info->io_addr_size = 8;
Thomas Gleixner0f2ed4c2006-07-01 19:29:33 -07008148 info->irq_flags = IRQF_SHARED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008149
8150 if (dev->device == 0x0210) {
8151 /* Version 1 PCI9030 based universal PCI adapter */
8152 info->misc_ctrl_value = 0x007c4080;
8153 info->hw_version = 1;
8154 } else {
8155 /* Version 0 PCI9050 based 5V PCI adapter
8156 * A PCI9050 bug prevents reading LCR registers if
8157 * LCR base address bit 7 is set. Maintain shadow
8158 * value so we can write to LCR misc control reg.
8159 */
8160 info->misc_ctrl_value = 0x087e4546;
8161 info->hw_version = 0;
8162 }
8163
8164 mgsl_add_device(info);
8165
8166 return 0;
8167}
8168
8169static void __devexit synclink_remove_one (struct pci_dev *dev)
8170{
8171}
8172