blob: f0bebbe0682b9b18b622f47bc7cf5471e503ec92 [file] [log] [blame]
Joachim Eastwood2f77ac92015-04-28 00:14:08 +02001/*
2 * Pinctrl driver for NXP LPC18xx/LPC43xx System Control Unit (SCU)
3 *
4 * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#include <linux/bitops.h>
12#include <linux/clk.h>
13#include <linux/io.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/of_device.h>
17#include <linux/pinctrl/pinctrl.h>
18#include <linux/pinctrl/pinmux.h>
19#include <linux/pinctrl/pinconf-generic.h>
20
21#include "core.h"
22#include "pinctrl-utils.h"
23
24/* LPC18XX SCU analog function registers */
25#define LPC18XX_SCU_REG_ENAIO0 0xc88
26#define LPC18XX_SCU_REG_ENAIO1 0xc8c
27#define LPC18XX_SCU_REG_ENAIO2 0xc90
28#define LPC18XX_SCU_REG_ENAIO2_DAC BIT(0)
29
30/* LPC18XX SCU pin register definitions */
31#define LPC18XX_SCU_PIN_MODE_MASK 0x7
32#define LPC18XX_SCU_PIN_EPD BIT(3)
33#define LPC18XX_SCU_PIN_EPUN BIT(4)
34#define LPC18XX_SCU_PIN_EHS BIT(5)
35#define LPC18XX_SCU_PIN_EZI BIT(6)
36#define LPC18XX_SCU_PIN_ZIF BIT(7)
37#define LPC18XX_SCU_PIN_EHD_MASK 0x300
38#define LPC18XX_SCU_PIN_EHD_POS 8
39
Joachim Eastwoodbd6eab92015-07-15 00:25:27 +020040#define LPC18XX_SCU_USB1_EPD BIT(2)
41#define LPC18XX_SCU_USB1_EPWR BIT(4)
42
Joachim Eastwood2f77ac92015-04-28 00:14:08 +020043#define LPC18XX_SCU_I2C0_EFP BIT(0)
44#define LPC18XX_SCU_I2C0_EHD BIT(2)
45#define LPC18XX_SCU_I2C0_EZI BIT(3)
46#define LPC18XX_SCU_I2C0_ZIF BIT(7)
47#define LPC18XX_SCU_I2C0_SCL_SHIFT 0
48#define LPC18XX_SCU_I2C0_SDA_SHIFT 8
49
50#define LPC18XX_SCU_FUNC_PER_PIN 8
51
Joachim Eastwood2f77ac92015-04-28 00:14:08 +020052/* LPC18xx pin types */
53enum {
54 TYPE_ND, /* Normal-drive */
55 TYPE_HD, /* High-drive */
56 TYPE_HS, /* High-speed */
57 TYPE_I2C0,
58 TYPE_USB1,
59};
60
61/* LPC18xx pin functions */
62enum {
63 FUNC_R, /* Reserved */
64 FUNC_ADC,
65 FUNC_ADCTRIG,
66 FUNC_CAN0,
67 FUNC_CAN1,
68 FUNC_CGU_OUT,
69 FUNC_CLKIN,
70 FUNC_CLKOUT,
71 FUNC_CTIN,
72 FUNC_CTOUT,
73 FUNC_DAC,
74 FUNC_EMC,
75 FUNC_EMC_ALT,
76 FUNC_ENET,
77 FUNC_ENET_ALT,
78 FUNC_GPIO,
79 FUNC_I2C0,
80 FUNC_I2C1,
81 FUNC_I2S0_RX_MCLK,
82 FUNC_I2S0_RX_SCK,
83 FUNC_I2S0_RX_SDA,
84 FUNC_I2S0_RX_WS,
85 FUNC_I2S0_TX_MCLK,
86 FUNC_I2S0_TX_SCK,
87 FUNC_I2S0_TX_SDA,
88 FUNC_I2S0_TX_WS,
89 FUNC_I2S1,
90 FUNC_LCD,
91 FUNC_LCD_ALT,
92 FUNC_MCTRL,
93 FUNC_NMI,
94 FUNC_QEI,
95 FUNC_SDMMC,
96 FUNC_SGPIO,
97 FUNC_SPI,
98 FUNC_SPIFI,
99 FUNC_SSP0,
100 FUNC_SSP0_ALT,
101 FUNC_SSP1,
102 FUNC_TIMER0,
103 FUNC_TIMER1,
104 FUNC_TIMER2,
105 FUNC_TIMER3,
106 FUNC_TRACE,
107 FUNC_UART0,
108 FUNC_UART1,
109 FUNC_UART2,
110 FUNC_UART3,
111 FUNC_USB0,
112 FUNC_USB1,
Joachim Eastwood16a48512015-05-14 14:45:58 +0200113 FUNC_MAX
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200114};
115
116static const char *const lpc18xx_function_names[] = {
Joachim Eastwood16a48512015-05-14 14:45:58 +0200117 [FUNC_R] = "reserved",
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200118 [FUNC_ADC] = "adc",
119 [FUNC_ADCTRIG] = "adctrig",
120 [FUNC_CAN0] = "can0",
121 [FUNC_CAN1] = "can1",
122 [FUNC_CGU_OUT] = "cgu_out",
123 [FUNC_CLKIN] = "clkin",
124 [FUNC_CLKOUT] = "clkout",
125 [FUNC_CTIN] = "ctin",
126 [FUNC_CTOUT] = "ctout",
127 [FUNC_DAC] = "dac",
128 [FUNC_EMC] = "emc",
129 [FUNC_EMC_ALT] = "emc_alt",
130 [FUNC_ENET] = "enet",
131 [FUNC_ENET_ALT] = "enet_alt",
132 [FUNC_GPIO] = "gpio",
133 [FUNC_I2C0] = "i2c0",
134 [FUNC_I2C1] = "i2c1",
135 [FUNC_I2S0_RX_MCLK] = "i2s0_rx_mclk",
136 [FUNC_I2S0_RX_SCK] = "i2s0_rx_sck",
137 [FUNC_I2S0_RX_SDA] = "i2s0_rx_sda",
138 [FUNC_I2S0_RX_WS] = "i2s0_rx_ws",
139 [FUNC_I2S0_TX_MCLK] = "i2s0_tx_mclk",
140 [FUNC_I2S0_TX_SCK] = "i2s0_tx_sck",
141 [FUNC_I2S0_TX_SDA] = "i2s0_tx_sda",
142 [FUNC_I2S0_TX_WS] = "i2s0_tx_ws",
143 [FUNC_I2S1] = "i2s1",
144 [FUNC_LCD] = "lcd",
145 [FUNC_LCD_ALT] = "lcd_alt",
146 [FUNC_MCTRL] = "mctrl",
147 [FUNC_NMI] = "nmi",
148 [FUNC_QEI] = "qei",
149 [FUNC_SDMMC] = "sdmmc",
150 [FUNC_SGPIO] = "sgpio",
151 [FUNC_SPI] = "spi",
152 [FUNC_SPIFI] = "spifi",
153 [FUNC_SSP0] = "ssp0",
154 [FUNC_SSP0_ALT] = "ssp0_alt",
155 [FUNC_SSP1] = "ssp1",
156 [FUNC_TIMER0] = "timer0",
157 [FUNC_TIMER1] = "timer1",
158 [FUNC_TIMER2] = "timer2",
159 [FUNC_TIMER3] = "timer3",
160 [FUNC_TRACE] = "trace",
161 [FUNC_UART0] = "uart0",
162 [FUNC_UART1] = "uart1",
163 [FUNC_UART2] = "uart2",
164 [FUNC_UART3] = "uart3",
165 [FUNC_USB0] = "usb0",
166 [FUNC_USB1] = "usb1",
167};
168
Joachim Eastwood16a48512015-05-14 14:45:58 +0200169struct lpc18xx_pmx_func {
170 const char **groups;
171 unsigned ngroups;
172};
173
174struct lpc18xx_scu_data {
175 struct pinctrl_dev *pctl;
176 void __iomem *base;
177 struct clk *clk;
178 struct lpc18xx_pmx_func func[FUNC_MAX];
179};
180
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200181struct lpc18xx_pin_caps {
182 unsigned int offset;
183 unsigned char functions[LPC18XX_SCU_FUNC_PER_PIN];
184 unsigned char analog;
185 unsigned char type;
186};
187
188/* Analog pins are required to have both bias and input disabled */
189#define LPC18XX_SCU_ANALOG_PIN_CFG 0x10
190
191/* Macros to maniupluate analog member in lpc18xx_pin_caps */
192#define LPC18XX_ANALOG_PIN BIT(7)
193#define LPC18XX_ANALOG_ADC(a) ((a >> 5) & 0x3)
194#define LPC18XX_ANALOG_BIT_MASK 0x1f
195#define ADC0 (LPC18XX_ANALOG_PIN | (0x00 << 5))
196#define ADC1 (LPC18XX_ANALOG_PIN | (0x01 << 5))
197#define DAC LPC18XX_ANALOG_PIN
198
199#define LPC_P(port, pin, f0, f1, f2, f3, f4, f5, f6, f7, a, t) \
200static struct lpc18xx_pin_caps lpc18xx_pin_p##port##_##pin = { \
201 .offset = 0x##port * 32 * 4 + pin * 4, \
202 .functions = { \
203 FUNC_##f0, FUNC_##f1, FUNC_##f2, \
204 FUNC_##f3, FUNC_##f4, FUNC_##f5, \
205 FUNC_##f6, FUNC_##f7, \
206 }, \
207 .analog = a, \
208 .type = TYPE_##t, \
209}
210
211#define LPC_N(pname, off, f0, f1, f2, f3, f4, f5, f6, f7, a, t) \
212static struct lpc18xx_pin_caps lpc18xx_pin_##pname = { \
213 .offset = off, \
214 .functions = { \
215 FUNC_##f0, FUNC_##f1, FUNC_##f2, \
216 FUNC_##f3, FUNC_##f4, FUNC_##f5, \
217 FUNC_##f6, FUNC_##f7, \
218 }, \
219 .analog = a, \
220 .type = TYPE_##t, \
221}
222
223
224/* Pinmuxing table taken from data sheet */
225/* Pin FUNC0 FUNC1 FUNC2 FUNC3 FUNC4 FUNC5 FUNC6 FUNC7 ANALOG TYPE */
226LPC_P(0,0, GPIO, SSP1, ENET, SGPIO, R, R, I2S0_TX_WS,I2S1, 0, ND);
227LPC_P(0,1, GPIO, SSP1,ENET_ALT,SGPIO, R, R, ENET, I2S1, 0, ND);
228LPC_P(1,0, GPIO, CTIN, EMC, R, R, SSP0, SGPIO, R, 0, ND);
229LPC_P(1,1, GPIO, CTOUT, EMC, SGPIO, R, SSP0, R, R, 0, ND);
230LPC_P(1,2, GPIO, CTOUT, EMC, SGPIO, R, SSP0, R, R, 0, ND);
231LPC_P(1,3, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND);
232LPC_P(1,4, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND);
233LPC_P(1,5, GPIO, CTOUT, R, EMC, USB0, SSP1, SGPIO, SDMMC, 0, ND);
234LPC_P(1,6, GPIO, CTIN, R, EMC, R, R, SGPIO, SDMMC, 0, ND);
235LPC_P(1,7, GPIO, UART1, CTOUT, EMC, USB0, R, R, R, 0, ND);
236LPC_P(1,8, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND);
237LPC_P(1,9, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND);
238LPC_P(1,10, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND);
239LPC_P(1,11, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND);
240LPC_P(1,12, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, SDMMC, 0, ND);
241LPC_P(1,13, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, SDMMC, 0, ND);
242LPC_P(1,14, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, R, 0, ND);
243LPC_P(1,15, GPIO, UART2, SGPIO, ENET, TIMER0, R, R, R, 0, ND);
244LPC_P(1,16, GPIO, UART2, SGPIO,ENET_ALT,TIMER0, R, R, ENET, 0, ND);
245LPC_P(1,17, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, HD);
246LPC_P(1,18, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, ND);
247LPC_P(1,19, ENET, SSP1, R, R, CLKOUT, R, I2S0_RX_MCLK,I2S1, 0, ND);
248LPC_P(1,20, GPIO, SSP1, R, ENET, TIMER0, R, SGPIO, R, 0, ND);
249LPC_P(2,0, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, ENET, 0, ND);
250LPC_P(2,1, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, R, 0, ND);
251LPC_P(2,2, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND);
252LPC_P(2,3, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD);
253LPC_P(2,4, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD);
254LPC_P(2,5, SGPIO, CTIN, USB1, ADCTRIG, GPIO, R, TIMER3, USB0, 0, HD);
255LPC_P(2,6, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND);
256LPC_P(2,7, GPIO, CTOUT, UART3, EMC, R, R, TIMER3, R, 0, ND);
257LPC_P(2,8, SGPIO, CTOUT, UART3, EMC, GPIO, R, R, R, 0, ND);
258LPC_P(2,9, GPIO, CTOUT, UART3, EMC, R, R, R, R, 0, ND);
259LPC_P(2,10, GPIO, CTOUT, UART2, EMC, R, R, R, R, 0, ND);
260LPC_P(2,11, GPIO, CTOUT, UART2, EMC, R, R, R, R, 0, ND);
261LPC_P(2,12, GPIO, CTOUT, R, EMC, R, R, R, UART2, 0, ND);
262LPC_P(2,13, GPIO, CTIN, R, EMC, R, R, R, UART2, 0, ND);
263LPC_P(3,0, I2S0_RX_SCK, I2S0_RX_MCLK, I2S0_TX_SCK, I2S0_TX_MCLK,SSP0,R,R,R, 0, ND);
264LPC_P(3,1, I2S0_TX_WS, I2S0_RX_WS,CAN0,USB1,GPIO, R, LCD, R, 0, ND);
265LPC_P(3,2, I2S0_TX_SDA, I2S0_RX_SDA,CAN0,USB1,GPIO, R, LCD, R, 0, ND);
266LPC_P(3,3, R, SPI, SSP0, SPIFI, CGU_OUT,R, I2S0_TX_MCLK, I2S1, 0, HS);
267LPC_P(3,4, GPIO, R, R, SPIFI, UART1, I2S0_TX_WS, I2S1, LCD, 0, ND);
268LPC_P(3,5, GPIO, R, R, SPIFI, UART1, I2S0_TX_SDA,I2S1, LCD, 0, ND);
269LPC_P(3,6, GPIO, SPI, SSP0, SPIFI, R, SSP0_ALT, R, R, 0, ND);
270LPC_P(3,7, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND);
271LPC_P(3,8, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND);
272LPC_P(4,0, GPIO, MCTRL, NMI, R, R, LCD, UART3, R, 0, ND);
273LPC_P(4,1, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, ENET, ADC0|1, ND);
274LPC_P(4,2, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, 0, ND);
275LPC_P(4,3, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, ADC0|0, ND);
276LPC_P(4,4, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, DAC, ND);
277LPC_P(4,5, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND);
278LPC_P(4,6, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND);
279LPC_P(4,7, LCD, CLKIN, R, R, R, R, I2S1,I2S0_TX_SCK, 0, ND);
280LPC_P(4,8, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND);
281LPC_P(4,9, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND);
282LPC_P(4,10, R, CTIN, LCD, R, GPIO, LCD_ALT, R, SGPIO, 0, ND);
283LPC_P(5,0, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
284LPC_P(5,1, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
285LPC_P(5,2, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
286LPC_P(5,3, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
287LPC_P(5,4, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
288LPC_P(5,5, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
289LPC_P(5,6, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
290LPC_P(5,7, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
291LPC_P(6,0, R, I2S0_RX_MCLK,R, R, I2S0_RX_SCK, R, R, R, 0, ND);
292LPC_P(6,1, GPIO, EMC, UART0, I2S0_RX_WS, R, TIMER2, R, R, 0, ND);
293LPC_P(6,2, GPIO, EMC, UART0, I2S0_RX_SDA, R, TIMER2, R, R, 0, ND);
294LPC_P(6,3, GPIO, USB0, SGPIO, EMC, R, TIMER2, R, R, 0, ND);
295LPC_P(6,4, GPIO, CTIN, UART0, EMC, R, R, R, R, 0, ND);
296LPC_P(6,5, GPIO, CTOUT, UART0, EMC, R, R, R, R, 0, ND);
297LPC_P(6,6, GPIO, EMC, SGPIO, USB0, R, TIMER2, R, R, 0, ND);
298LPC_P(6,7, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND);
299LPC_P(6,8, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND);
300LPC_P(6,9, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND);
301LPC_P(6,10, GPIO, MCTRL, R, EMC, R, R, R, R, 0, ND);
302LPC_P(6,11, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND);
303LPC_P(6,12, GPIO, CTOUT, R, EMC, R, R, R, R, 0, ND);
304LPC_P(7,0, GPIO, CTOUT, R, LCD, R, R, R, SGPIO, 0, ND);
305LPC_P(7,1, GPIO, CTOUT,I2S0_TX_WS,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND);
306LPC_P(7,2, GPIO, CTIN,I2S0_TX_SDA,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND);
307LPC_P(7,3, GPIO, CTIN, R, LCD,LCD_ALT, R, R, R, 0, ND);
308LPC_P(7,4, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|4, ND);
309LPC_P(7,5, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|3, ND);
310LPC_P(7,6, GPIO, CTOUT, R, LCD, R, TRACE, R, R, 0, ND);
311LPC_P(7,7, GPIO, CTOUT, R, LCD, R, TRACE, ENET, SGPIO, ADC1|6, ND);
312LPC_P(8,0, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD);
313LPC_P(8,1, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD);
314LPC_P(8,2, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD);
315LPC_P(8,3, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
316LPC_P(8,4, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
317LPC_P(8,5, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
318LPC_P(8,6, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
319LPC_P(8,7, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
320LPC_P(8,8, R, USB1, R, R, R, R,CGU_OUT, I2S1, 0, ND);
321LPC_P(9,0, GPIO, MCTRL, R, R, R, ENET, SGPIO, SSP0, 0, ND);
322LPC_P(9,1, GPIO, MCTRL, R, R, I2S0_TX_WS,ENET, SGPIO, SSP0, 0, ND);
323LPC_P(9,2, GPIO, MCTRL, R, R, I2S0_TX_SDA,ENET,SGPIO, SSP0, 0, ND);
324LPC_P(9,3, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART3, 0, ND);
325LPC_P(9,4, R, MCTRL, USB1, R, GPIO, ENET, SGPIO, UART3, 0, ND);
326LPC_P(9,5, R, MCTRL, USB1, R, GPIO, ENET, SGPIO, UART0, 0, ND);
327LPC_P(9,6, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART0, 0, ND);
328LPC_P(a,0, R, R, R, R, R, I2S1, CGU_OUT, R, 0, ND);
329LPC_P(a,1, GPIO, QEI, R, UART2, R, R, R, R, 0, HD);
330LPC_P(a,2, GPIO, QEI, R, UART2, R, R, R, R, 0, HD);
331LPC_P(a,3, GPIO, QEI, R, R, R, R, R, R, 0, HD);
332LPC_P(a,4, R, CTOUT, R, EMC, GPIO, R, R, R, 0, ND);
333LPC_P(b,0, R, CTOUT, LCD, R, GPIO, R, R, R, 0, ND);
334LPC_P(b,1, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND);
335LPC_P(b,2, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND);
336LPC_P(b,3, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND);
337LPC_P(b,4, R, USB1, LCD, R, GPIO, CTIN, R, R, 0, ND);
338LPC_P(b,5, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, 0, ND);
339LPC_P(b,6, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, ADC0|6, ND);
340LPC_P(c,0, R, USB1, R, ENET, LCD, R, R, SDMMC, ADC1|1, ND);
341LPC_P(c,1, USB1, R, UART1, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
342LPC_P(c,2, USB1, R, UART1, ENET, GPIO, R, R, SDMMC, 0, ND);
343LPC_P(c,3, USB1, R, UART1, ENET, GPIO, R, R, SDMMC, ADC1|0, ND);
344LPC_P(c,4, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
345LPC_P(c,5, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
346LPC_P(c,6, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
347LPC_P(c,7, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
348LPC_P(c,8, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
349LPC_P(c,9, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
350LPC_P(c,10, R, USB1, UART1, R, GPIO, R, TIMER3, SDMMC, 0, ND);
351LPC_P(c,11, R, USB1, UART1, R, GPIO, R, R, SDMMC, 0, ND);
352LPC_P(c,12, R, R, UART1, R, GPIO, SGPIO, I2S0_TX_SDA,SDMMC, 0, ND);
353LPC_P(c,13, R, R, UART1, R, GPIO, SGPIO, I2S0_TX_WS, SDMMC, 0, ND);
354LPC_P(c,14, R, R, UART1, R, GPIO, SGPIO, ENET, SDMMC, 0, ND);
355LPC_P(d,0, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
356LPC_P(d,1, R, R, EMC, R, GPIO, SDMMC, R, SGPIO, 0, ND);
357LPC_P(d,2, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
358LPC_P(d,3, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
359LPC_P(d,4, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
360LPC_P(d,5, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
361LPC_P(d,6, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
362LPC_P(d,7, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND);
363LPC_P(d,8, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND);
364LPC_P(d,9, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
365LPC_P(d,10, R, CTIN, EMC, R, GPIO, R, R, R, 0, ND);
366LPC_P(d,11, R, R, EMC, R, GPIO, USB1, CTOUT, R, 0, ND);
367LPC_P(d,12, R, R, EMC, R, GPIO, R, CTOUT, R, 0, ND);
368LPC_P(d,13, R, CTIN, EMC, R, GPIO, R, CTOUT, R, 0, ND);
369LPC_P(d,14, R, R, EMC, R, GPIO, R, CTOUT, R, 0, ND);
370LPC_P(d,15, R, R, EMC, R, GPIO, SDMMC, CTOUT, R, 0, ND);
371LPC_P(d,16, R, R, EMC, R, GPIO, SDMMC, CTOUT, R, 0, ND);
372LPC_P(e,0, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
373LPC_P(e,1, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
374LPC_P(e,2,ADCTRIG, CAN0, R, EMC, GPIO, R, R, R, 0, ND);
375LPC_P(e,3, R, CAN0,ADCTRIG, EMC, GPIO, R, R, R, 0, ND);
376LPC_P(e,4, R, NMI, R, EMC, GPIO, R, R, R, 0, ND);
377LPC_P(e,5, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
378LPC_P(e,6, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
379LPC_P(e,7, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
380LPC_P(e,8, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
381LPC_P(e,9, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND);
382LPC_P(e,10, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND);
383LPC_P(e,11, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
384LPC_P(e,12, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
385LPC_P(e,13, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND);
386LPC_P(e,14, R, R, R, EMC, GPIO, R, R, R, 0, ND);
387LPC_P(e,15, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND);
388LPC_P(f,0, SSP0, CLKIN, R, R, R, R, R, I2S1, 0, ND);
389LPC_P(f,1, R, R, SSP0, R, GPIO, R, SGPIO, R, 0, ND);
390LPC_P(f,2, R, UART3, SSP0, R, GPIO, R, SGPIO, R, 0, ND);
391LPC_P(f,3, R, UART3, SSP0, R, GPIO, R, SGPIO, R, 0, ND);
392LPC_P(f,4, SSP1, CLKIN, TRACE, R, R, R, I2S0_TX_MCLK,I2S0_RX_SCK, 0, ND);
393LPC_P(f,5, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, R, ADC1|4, ND);
394LPC_P(f,6, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|3, ND);
395LPC_P(f,7, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|7, ND);
396LPC_P(f,8, R, UART0, CTIN, TRACE, GPIO, R, SGPIO, R, ADC0|2, ND);
397LPC_P(f,9, R, UART0, CTOUT, R, GPIO, R, SGPIO, R, ADC1|2, ND);
398LPC_P(f,10, R, UART0, R, R, GPIO, R, SDMMC, R, ADC0|5, ND);
399LPC_P(f,11, R, UART0, R, R, GPIO, R, SDMMC, R, ADC1|5, ND);
400
401/* Pin Offset FUNC0 FUNC1 FUNC2 FUNC3 FUNC4 FUNC5 FUNC6 FUNC7 ANALOG TYPE */
402LPC_N(clk0, 0xc00, EMC, CLKOUT, R, R, SDMMC, EMC_ALT, SSP1, ENET, 0, HS);
403LPC_N(clk1, 0xc04, EMC, CLKOUT, R, R, R, CGU_OUT, R, I2S1, 0, HS);
404LPC_N(clk2, 0xc08, EMC, CLKOUT, R, R, SDMMC, EMC_ALT,I2S0_TX_MCLK,I2S1, 0, HS);
405LPC_N(clk3, 0xc0c, EMC, CLKOUT, R, R, R, CGU_OUT, R, I2S1, 0, HS);
406LPC_N(usb1_dm, 0xc80, R, R, R, R, R, R, R, R, 0, USB1);
407LPC_N(usb1_dp, 0xc80, R, R, R, R, R, R, R, R, 0, USB1);
408LPC_N(i2c0_scl, 0xc84, R, R, R, R, R, R, R, R, 0, I2C0);
409LPC_N(i2c0_sda, 0xc84, R, R, R, R, R, R, R, R, 0, I2C0);
410
411#define LPC18XX_PIN_P(port, pin) { \
412 .number = 0x##port * 32 + pin, \
413 .name = "p"#port"_"#pin, \
414 .drv_data = &lpc18xx_pin_p##port##_##pin \
415}
416
417/* Pin numbers for special pins */
418enum {
419 PIN_CLK0 = 600,
420 PIN_CLK1,
421 PIN_CLK2,
422 PIN_CLK3,
423 PIN_USB1_DM,
424 PIN_USB1_DP,
425 PIN_I2C0_SCL,
426 PIN_I2C0_SDA,
427};
428
429#define LPC18XX_PIN(pname, n) { \
430 .number = n, \
431 .name = #pname, \
432 .drv_data = &lpc18xx_pin_##pname \
433}
434
435static const struct pinctrl_pin_desc lpc18xx_pins[] = {
436 LPC18XX_PIN_P(0,0),
437 LPC18XX_PIN_P(0,1),
438 LPC18XX_PIN_P(1,0),
439 LPC18XX_PIN_P(1,1),
440 LPC18XX_PIN_P(1,2),
441 LPC18XX_PIN_P(1,3),
442 LPC18XX_PIN_P(1,4),
443 LPC18XX_PIN_P(1,5),
444 LPC18XX_PIN_P(1,6),
445 LPC18XX_PIN_P(1,7),
446 LPC18XX_PIN_P(1,8),
447 LPC18XX_PIN_P(1,9),
448 LPC18XX_PIN_P(1,10),
449 LPC18XX_PIN_P(1,11),
450 LPC18XX_PIN_P(1,12),
451 LPC18XX_PIN_P(1,13),
452 LPC18XX_PIN_P(1,14),
453 LPC18XX_PIN_P(1,15),
454 LPC18XX_PIN_P(1,16),
455 LPC18XX_PIN_P(1,17),
456 LPC18XX_PIN_P(1,18),
457 LPC18XX_PIN_P(1,19),
458 LPC18XX_PIN_P(1,20),
459 LPC18XX_PIN_P(2,0),
460 LPC18XX_PIN_P(2,1),
461 LPC18XX_PIN_P(2,2),
462 LPC18XX_PIN_P(2,3),
463 LPC18XX_PIN_P(2,4),
464 LPC18XX_PIN_P(2,5),
465 LPC18XX_PIN_P(2,6),
466 LPC18XX_PIN_P(2,7),
467 LPC18XX_PIN_P(2,8),
468 LPC18XX_PIN_P(2,9),
469 LPC18XX_PIN_P(2,10),
470 LPC18XX_PIN_P(2,11),
471 LPC18XX_PIN_P(2,12),
472 LPC18XX_PIN_P(2,13),
473 LPC18XX_PIN_P(3,0),
474 LPC18XX_PIN_P(3,1),
475 LPC18XX_PIN_P(3,2),
476 LPC18XX_PIN_P(3,3),
477 LPC18XX_PIN_P(3,4),
478 LPC18XX_PIN_P(3,5),
479 LPC18XX_PIN_P(3,6),
480 LPC18XX_PIN_P(3,7),
481 LPC18XX_PIN_P(3,8),
482 LPC18XX_PIN_P(4,0),
483 LPC18XX_PIN_P(4,1),
484 LPC18XX_PIN_P(4,2),
485 LPC18XX_PIN_P(4,3),
486 LPC18XX_PIN_P(4,4),
487 LPC18XX_PIN_P(4,5),
488 LPC18XX_PIN_P(4,6),
489 LPC18XX_PIN_P(4,7),
490 LPC18XX_PIN_P(4,8),
491 LPC18XX_PIN_P(4,9),
492 LPC18XX_PIN_P(4,10),
493 LPC18XX_PIN_P(5,0),
494 LPC18XX_PIN_P(5,1),
495 LPC18XX_PIN_P(5,2),
496 LPC18XX_PIN_P(5,3),
497 LPC18XX_PIN_P(5,4),
498 LPC18XX_PIN_P(5,5),
499 LPC18XX_PIN_P(5,6),
500 LPC18XX_PIN_P(5,7),
501 LPC18XX_PIN_P(6,0),
502 LPC18XX_PIN_P(6,1),
503 LPC18XX_PIN_P(6,2),
504 LPC18XX_PIN_P(6,3),
505 LPC18XX_PIN_P(6,4),
506 LPC18XX_PIN_P(6,5),
507 LPC18XX_PIN_P(6,6),
508 LPC18XX_PIN_P(6,7),
509 LPC18XX_PIN_P(6,8),
510 LPC18XX_PIN_P(6,9),
511 LPC18XX_PIN_P(6,10),
512 LPC18XX_PIN_P(6,11),
513 LPC18XX_PIN_P(6,12),
514 LPC18XX_PIN_P(7,0),
515 LPC18XX_PIN_P(7,1),
516 LPC18XX_PIN_P(7,2),
517 LPC18XX_PIN_P(7,3),
518 LPC18XX_PIN_P(7,4),
519 LPC18XX_PIN_P(7,5),
520 LPC18XX_PIN_P(7,6),
521 LPC18XX_PIN_P(7,7),
522 LPC18XX_PIN_P(8,0),
523 LPC18XX_PIN_P(8,1),
524 LPC18XX_PIN_P(8,2),
525 LPC18XX_PIN_P(8,3),
526 LPC18XX_PIN_P(8,4),
527 LPC18XX_PIN_P(8,5),
528 LPC18XX_PIN_P(8,6),
529 LPC18XX_PIN_P(8,7),
530 LPC18XX_PIN_P(8,8),
531 LPC18XX_PIN_P(9,0),
532 LPC18XX_PIN_P(9,1),
533 LPC18XX_PIN_P(9,2),
534 LPC18XX_PIN_P(9,3),
535 LPC18XX_PIN_P(9,4),
536 LPC18XX_PIN_P(9,5),
537 LPC18XX_PIN_P(9,6),
538 LPC18XX_PIN_P(a,0),
539 LPC18XX_PIN_P(a,1),
540 LPC18XX_PIN_P(a,2),
541 LPC18XX_PIN_P(a,3),
542 LPC18XX_PIN_P(a,4),
543 LPC18XX_PIN_P(b,0),
544 LPC18XX_PIN_P(b,1),
545 LPC18XX_PIN_P(b,2),
546 LPC18XX_PIN_P(b,3),
547 LPC18XX_PIN_P(b,4),
548 LPC18XX_PIN_P(b,5),
549 LPC18XX_PIN_P(b,6),
550 LPC18XX_PIN_P(c,0),
551 LPC18XX_PIN_P(c,1),
552 LPC18XX_PIN_P(c,2),
553 LPC18XX_PIN_P(c,3),
554 LPC18XX_PIN_P(c,4),
555 LPC18XX_PIN_P(c,5),
556 LPC18XX_PIN_P(c,6),
557 LPC18XX_PIN_P(c,7),
558 LPC18XX_PIN_P(c,8),
559 LPC18XX_PIN_P(c,9),
560 LPC18XX_PIN_P(c,10),
561 LPC18XX_PIN_P(c,11),
562 LPC18XX_PIN_P(c,12),
563 LPC18XX_PIN_P(c,13),
564 LPC18XX_PIN_P(c,14),
565 LPC18XX_PIN_P(d,0),
566 LPC18XX_PIN_P(d,1),
567 LPC18XX_PIN_P(d,2),
568 LPC18XX_PIN_P(d,3),
569 LPC18XX_PIN_P(d,4),
570 LPC18XX_PIN_P(d,5),
571 LPC18XX_PIN_P(d,6),
572 LPC18XX_PIN_P(d,7),
573 LPC18XX_PIN_P(d,8),
574 LPC18XX_PIN_P(d,9),
575 LPC18XX_PIN_P(d,10),
576 LPC18XX_PIN_P(d,11),
577 LPC18XX_PIN_P(d,12),
578 LPC18XX_PIN_P(d,13),
579 LPC18XX_PIN_P(d,14),
580 LPC18XX_PIN_P(d,15),
581 LPC18XX_PIN_P(d,16),
582 LPC18XX_PIN_P(e,0),
583 LPC18XX_PIN_P(e,1),
584 LPC18XX_PIN_P(e,2),
585 LPC18XX_PIN_P(e,3),
586 LPC18XX_PIN_P(e,4),
587 LPC18XX_PIN_P(e,5),
588 LPC18XX_PIN_P(e,6),
589 LPC18XX_PIN_P(e,7),
590 LPC18XX_PIN_P(e,8),
591 LPC18XX_PIN_P(e,9),
592 LPC18XX_PIN_P(e,10),
593 LPC18XX_PIN_P(e,11),
594 LPC18XX_PIN_P(e,12),
595 LPC18XX_PIN_P(e,13),
596 LPC18XX_PIN_P(e,14),
597 LPC18XX_PIN_P(e,15),
598 LPC18XX_PIN_P(f,0),
599 LPC18XX_PIN_P(f,1),
600 LPC18XX_PIN_P(f,2),
601 LPC18XX_PIN_P(f,3),
602 LPC18XX_PIN_P(f,4),
603 LPC18XX_PIN_P(f,5),
604 LPC18XX_PIN_P(f,6),
605 LPC18XX_PIN_P(f,7),
606 LPC18XX_PIN_P(f,8),
607 LPC18XX_PIN_P(f,9),
608 LPC18XX_PIN_P(f,10),
609 LPC18XX_PIN_P(f,11),
610
611 LPC18XX_PIN(clk0, PIN_CLK0),
612 LPC18XX_PIN(clk1, PIN_CLK1),
613 LPC18XX_PIN(clk2, PIN_CLK2),
614 LPC18XX_PIN(clk3, PIN_CLK3),
615 LPC18XX_PIN(usb1_dm, PIN_USB1_DM),
616 LPC18XX_PIN(usb1_dp, PIN_USB1_DP),
617 LPC18XX_PIN(i2c0_scl, PIN_I2C0_SCL),
618 LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA),
619};
620
621static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg)
622{
Joachim Eastwoodbd6eab92015-07-15 00:25:27 +0200623 switch (param) {
624 case PIN_CONFIG_LOW_POWER_MODE:
625 if (reg & LPC18XX_SCU_USB1_EPWR)
626 *arg = 0;
627 else
628 *arg = 1;
629 break;
630
631 case PIN_CONFIG_BIAS_DISABLE:
632 if (reg & LPC18XX_SCU_USB1_EPD)
633 return -EINVAL;
634 break;
635
636 case PIN_CONFIG_BIAS_PULL_DOWN:
637 if (reg & LPC18XX_SCU_USB1_EPD)
638 *arg = 1;
639 else
640 return -EINVAL;
641 break;
642
643 default:
644 return -ENOTSUPP;
645 }
646
647 return 0;
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200648}
649
650static int lpc18xx_pconf_get_i2c0(enum pin_config_param param, int *arg, u32 reg,
651 unsigned pin)
652{
653 u8 shift;
654
655 if (pin == PIN_I2C0_SCL)
656 shift = LPC18XX_SCU_I2C0_SCL_SHIFT;
657 else
658 shift = LPC18XX_SCU_I2C0_SDA_SHIFT;
659
660 switch (param) {
661 case PIN_CONFIG_INPUT_ENABLE:
662 if (reg & (LPC18XX_SCU_I2C0_EZI << shift))
663 *arg = 1;
664 else
665 return -EINVAL;
666 break;
667
668 case PIN_CONFIG_SLEW_RATE:
669 if (reg & (LPC18XX_SCU_I2C0_EHD << shift))
670 *arg = 1;
671 else
672 *arg = 0;
673 break;
674
675 case PIN_CONFIG_INPUT_SCHMITT:
676 if (reg & (LPC18XX_SCU_I2C0_EFP << shift))
677 *arg = 3;
678 else
679 *arg = 50;
680 break;
681
682 case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
683 if (reg & (LPC18XX_SCU_I2C0_ZIF << shift))
684 return -EINVAL;
685 else
686 *arg = 1;
687 break;
688
689 default:
690 return -ENOTSUPP;
691 }
692
693 return 0;
694}
695
696static int lpc18xx_pconf_get_pin(enum pin_config_param param, int *arg, u32 reg,
697 struct lpc18xx_pin_caps *pin_cap)
698{
699 switch (param) {
700 case PIN_CONFIG_BIAS_DISABLE:
701 if ((!(reg & LPC18XX_SCU_PIN_EPD)) && (reg & LPC18XX_SCU_PIN_EPUN))
702 ;
703 else
704 return -EINVAL;
705 break;
706
707 case PIN_CONFIG_BIAS_PULL_UP:
708 if (reg & LPC18XX_SCU_PIN_EPUN)
709 return -EINVAL;
710 else
711 *arg = 1;
712 break;
713
714 case PIN_CONFIG_BIAS_PULL_DOWN:
715 if (reg & LPC18XX_SCU_PIN_EPD)
716 *arg = 1;
717 else
718 return -EINVAL;
719 break;
720
721 case PIN_CONFIG_INPUT_ENABLE:
722 if (reg & LPC18XX_SCU_PIN_EZI)
723 *arg = 1;
724 else
725 return -EINVAL;
726 break;
727
728 case PIN_CONFIG_SLEW_RATE:
729 if (pin_cap->type == TYPE_HD)
730 return -ENOTSUPP;
731
732 if (reg & LPC18XX_SCU_PIN_EHS)
733 *arg = 1;
734 else
735 *arg = 0;
736 break;
737
738 case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
739 if (reg & LPC18XX_SCU_PIN_ZIF)
740 return -EINVAL;
741 else
742 *arg = 1;
743 break;
744
745 case PIN_CONFIG_DRIVE_STRENGTH:
746 if (pin_cap->type != TYPE_HD)
747 return -ENOTSUPP;
748
749 *arg = (reg & LPC18XX_SCU_PIN_EHD_MASK) >> LPC18XX_SCU_PIN_EHD_POS;
750 switch (*arg) {
751 case 3: *arg += 5;
752 case 2: *arg += 5;
753 case 1: *arg += 3;
754 case 0: *arg += 4;
755 }
756 break;
757
758 default:
759 return -ENOTSUPP;
760 }
761
762 return 0;
763}
764
Joachim Eastwood403fbde2015-05-06 19:11:21 +0200765static struct lpc18xx_pin_caps *lpc18xx_get_pin_caps(unsigned pin)
766{
767 int i;
768
769 for (i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) {
770 if (lpc18xx_pins[i].number == pin)
771 return lpc18xx_pins[i].drv_data;
772 }
773
774 return NULL;
775}
776
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200777static int lpc18xx_pconf_get(struct pinctrl_dev *pctldev, unsigned pin,
778 unsigned long *config)
779{
780 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
781 enum pin_config_param param = pinconf_to_config_param(*config);
782 struct lpc18xx_pin_caps *pin_cap;
783 int ret, arg = 0;
784 u32 reg;
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200785
Joachim Eastwood403fbde2015-05-06 19:11:21 +0200786 pin_cap = lpc18xx_get_pin_caps(pin);
787 if (!pin_cap)
788 return -EINVAL;
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200789
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200790 reg = readl(scu->base + pin_cap->offset);
791
792 if (pin_cap->type == TYPE_I2C0)
793 ret = lpc18xx_pconf_get_i2c0(param, &arg, reg, pin);
794 else if (pin_cap->type == TYPE_USB1)
795 ret = lpc18xx_pconf_get_usb1(param, &arg, reg);
796 else
797 ret = lpc18xx_pconf_get_pin(param, &arg, reg, pin_cap);
798
799 if (ret < 0)
800 return ret;
801
802 *config = pinconf_to_config_packed(param, (u16)arg);
803
804 return 0;
805}
806
807static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev,
808 enum pin_config_param param,
809 u16 param_val, u32 *reg)
810{
Joachim Eastwoodbd6eab92015-07-15 00:25:27 +0200811 switch (param) {
812 case PIN_CONFIG_LOW_POWER_MODE:
813 if (param_val)
814 *reg &= ~LPC18XX_SCU_USB1_EPWR;
815 else
816 *reg |= LPC18XX_SCU_USB1_EPWR;
817 break;
818
819 case PIN_CONFIG_BIAS_DISABLE:
820 *reg &= ~LPC18XX_SCU_USB1_EPD;
821 break;
822
823 case PIN_CONFIG_BIAS_PULL_DOWN:
824 *reg |= LPC18XX_SCU_USB1_EPD;
825 break;
826
827 default:
828 dev_err(pctldev->dev, "Property not supported\n");
829 return -ENOTSUPP;
830 }
831
832 return 0;
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200833}
834
835static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev,
836 enum pin_config_param param,
837 u16 param_val, u32 *reg,
838 unsigned pin)
839{
840 u8 shift;
841
842 if (pin == PIN_I2C0_SCL)
843 shift = LPC18XX_SCU_I2C0_SCL_SHIFT;
844 else
845 shift = LPC18XX_SCU_I2C0_SDA_SHIFT;
846
847 switch (param) {
848 case PIN_CONFIG_INPUT_ENABLE:
849 if (param_val)
850 *reg |= (LPC18XX_SCU_I2C0_EZI << shift);
851 else
852 *reg &= ~(LPC18XX_SCU_I2C0_EZI << shift);
853 break;
854
855 case PIN_CONFIG_SLEW_RATE:
856 if (param_val)
857 *reg |= (LPC18XX_SCU_I2C0_EHD << shift);
858 else
859 *reg &= ~(LPC18XX_SCU_I2C0_EHD << shift);
860 break;
861
862 case PIN_CONFIG_INPUT_SCHMITT:
863 if (param_val == 3)
864 *reg |= (LPC18XX_SCU_I2C0_EFP << shift);
865 else if (param_val == 50)
866 *reg &= ~(LPC18XX_SCU_I2C0_EFP << shift);
867 else
868 return -ENOTSUPP;
869 break;
870
871 case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
Joachim Eastwood681ccdc2015-07-15 00:25:26 +0200872 if (param_val)
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200873 *reg &= ~(LPC18XX_SCU_I2C0_ZIF << shift);
874 else
875 *reg |= (LPC18XX_SCU_I2C0_ZIF << shift);
876 break;
877
878 default:
879 dev_err(pctldev->dev, "Property not supported\n");
880 return -ENOTSUPP;
881 }
882
883 return 0;
884}
885
886static int lpc18xx_pconf_set_pin(struct pinctrl_dev *pctldev,
887 enum pin_config_param param,
888 u16 param_val, u32 *reg,
889 struct lpc18xx_pin_caps *pin_cap)
890{
891 switch (param) {
892 case PIN_CONFIG_BIAS_DISABLE:
893 *reg &= ~LPC18XX_SCU_PIN_EPD;
894 *reg |= LPC18XX_SCU_PIN_EPUN;
895 break;
896
897 case PIN_CONFIG_BIAS_PULL_UP:
898 *reg &= ~LPC18XX_SCU_PIN_EPUN;
899 break;
900
901 case PIN_CONFIG_BIAS_PULL_DOWN:
902 *reg |= LPC18XX_SCU_PIN_EPD;
903 break;
904
905 case PIN_CONFIG_INPUT_ENABLE:
906 if (param_val)
907 *reg |= LPC18XX_SCU_PIN_EZI;
908 else
909 *reg &= ~LPC18XX_SCU_PIN_EZI;
910 break;
911
912 case PIN_CONFIG_SLEW_RATE:
913 if (pin_cap->type == TYPE_HD) {
914 dev_err(pctldev->dev, "Slew rate unsupported on high-drive pins\n");
915 return -ENOTSUPP;
916 }
917
918 if (param_val == 0)
919 *reg &= ~LPC18XX_SCU_PIN_EHS;
920 else
921 *reg |= LPC18XX_SCU_PIN_EHS;
922 break;
923
924 case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
Joachim Eastwood681ccdc2015-07-15 00:25:26 +0200925 if (param_val)
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200926 *reg &= ~LPC18XX_SCU_PIN_ZIF;
927 else
928 *reg |= LPC18XX_SCU_PIN_ZIF;
929 break;
930
931 case PIN_CONFIG_DRIVE_STRENGTH:
932 if (pin_cap->type != TYPE_HD) {
933 dev_err(pctldev->dev, "Drive strength available only on high-drive pins\n");
934 return -ENOTSUPP;
935 }
936 *reg &= ~LPC18XX_SCU_PIN_EHD_MASK;
937
938 switch (param_val) {
939 case 20: param_val -= 5;
940 case 14: param_val -= 5;
941 case 8: param_val -= 3;
942 case 4: param_val -= 4;
943 break;
944 default:
945 dev_err(pctldev->dev, "Drive strength %u unsupported\n", param_val);
946 return -ENOTSUPP;
947 }
948 *reg |= param_val << LPC18XX_SCU_PIN_EHD_POS;
949 break;
950
951 default:
952 dev_err(pctldev->dev, "Property not supported\n");
953 return -ENOTSUPP;
954 }
955
956 return 0;
957}
958
959static int lpc18xx_pconf_set(struct pinctrl_dev *pctldev, unsigned pin,
960 unsigned long *configs, unsigned num_configs)
961{
962 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
963 struct lpc18xx_pin_caps *pin_cap;
964 enum pin_config_param param;
965 u16 param_val;
966 u32 reg;
967 int ret;
968 int i;
969
Joachim Eastwood403fbde2015-05-06 19:11:21 +0200970 pin_cap = lpc18xx_get_pin_caps(pin);
971 if (!pin_cap)
972 return -EINVAL;
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200973
Joachim Eastwood2f77ac92015-04-28 00:14:08 +0200974 reg = readl(scu->base + pin_cap->offset);
975
976 for (i = 0; i < num_configs; i++) {
977 param = pinconf_to_config_param(configs[i]);
978 param_val = pinconf_to_config_argument(configs[i]);
979
980 if (pin_cap->type == TYPE_I2C0)
981 ret = lpc18xx_pconf_set_i2c0(pctldev, param, param_val, &reg, pin);
982 else if (pin_cap->type == TYPE_USB1)
983 ret = lpc18xx_pconf_set_usb1(pctldev, param, param_val, &reg);
984 else
985 ret = lpc18xx_pconf_set_pin(pctldev, param, param_val, &reg, pin_cap);
986
987 if (ret)
988 return ret;
989 }
990
991 writel(reg, scu->base + pin_cap->offset);
992
993 return 0;
994}
995
996static const struct pinconf_ops lpc18xx_pconf_ops = {
997 .is_generic = true,
998 .pin_config_get = lpc18xx_pconf_get,
999 .pin_config_set = lpc18xx_pconf_set,
1000};
1001
1002static int lpc18xx_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
1003{
1004 return ARRAY_SIZE(lpc18xx_function_names);
1005}
1006
1007static const char *lpc18xx_pmx_get_func_name(struct pinctrl_dev *pctldev,
1008 unsigned function)
1009{
1010 return lpc18xx_function_names[function];
1011}
1012
1013static int lpc18xx_pmx_get_func_groups(struct pinctrl_dev *pctldev,
1014 unsigned function,
1015 const char *const **groups,
1016 unsigned *const num_groups)
1017{
Joachim Eastwood16a48512015-05-14 14:45:58 +02001018 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
1019
1020 *groups = scu->func[function].groups;
1021 *num_groups = scu->func[function].ngroups;
1022
Joachim Eastwood2f77ac92015-04-28 00:14:08 +02001023 return 0;
1024}
1025
1026static int lpc18xx_pmx_set(struct pinctrl_dev *pctldev, unsigned function,
1027 unsigned group)
1028{
1029 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
1030 struct lpc18xx_pin_caps *pin = lpc18xx_pins[group].drv_data;
1031 int func;
1032 u32 reg;
1033
1034 /* Dedicated USB1 and I2C0 pins doesn't support muxing */
1035 if (pin->type == TYPE_USB1) {
1036 if (function == FUNC_USB1)
1037 return 0;
1038
1039 goto fail;
1040 }
1041
1042 if (pin->type == TYPE_I2C0) {
1043 if (function == FUNC_I2C0)
1044 return 0;
1045
1046 goto fail;
1047 }
1048
1049 if (function == FUNC_ADC && (pin->analog & LPC18XX_ANALOG_PIN)) {
1050 u32 offset;
1051
1052 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset);
1053
1054 if (LPC18XX_ANALOG_ADC(pin->analog) == 0)
1055 offset = LPC18XX_SCU_REG_ENAIO0;
1056 else
1057 offset = LPC18XX_SCU_REG_ENAIO1;
1058
1059 reg = readl(scu->base + offset);
1060 reg |= pin->analog & LPC18XX_ANALOG_BIT_MASK;
1061 writel(reg, scu->base + offset);
1062
1063 return 0;
1064 }
1065
1066 if (function == FUNC_DAC && (pin->analog & LPC18XX_ANALOG_PIN)) {
1067 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset);
1068
1069 reg = readl(scu->base + LPC18XX_SCU_REG_ENAIO2);
1070 reg |= LPC18XX_SCU_REG_ENAIO2_DAC;
1071 writel(reg, scu->base + LPC18XX_SCU_REG_ENAIO2);
1072
1073 return 0;
1074 }
1075
1076 for (func = 0; func < LPC18XX_SCU_FUNC_PER_PIN; func++) {
1077 if (function == pin->functions[func])
1078 break;
1079 }
1080
1081 if (func >= LPC18XX_SCU_FUNC_PER_PIN)
1082 goto fail;
1083
1084 reg = readl(scu->base + pin->offset);
1085 reg &= ~LPC18XX_SCU_PIN_MODE_MASK;
1086 writel(reg | func, scu->base + pin->offset);
1087
1088 return 0;
1089fail:
1090 dev_err(pctldev->dev, "Pin %s can't be %s\n", lpc18xx_pins[group].name,
1091 lpc18xx_function_names[function]);
1092 return -EINVAL;
1093}
1094
1095static const struct pinmux_ops lpc18xx_pmx_ops = {
1096 .get_functions_count = lpc18xx_pmx_get_funcs_count,
1097 .get_function_name = lpc18xx_pmx_get_func_name,
1098 .get_function_groups = lpc18xx_pmx_get_func_groups,
1099 .set_mux = lpc18xx_pmx_set,
1100};
1101
1102static int lpc18xx_pctl_get_groups_count(struct pinctrl_dev *pctldev)
1103{
1104 return ARRAY_SIZE(lpc18xx_pins);
1105}
1106
1107static const char *lpc18xx_pctl_get_group_name(struct pinctrl_dev *pctldev,
1108 unsigned group)
1109{
1110 return lpc18xx_pins[group].name;
1111}
1112
1113static int lpc18xx_pctl_get_group_pins(struct pinctrl_dev *pctldev,
1114 unsigned group,
1115 const unsigned **pins,
1116 unsigned *num_pins)
1117{
1118 *pins = &lpc18xx_pins[group].number;
1119 *num_pins = 1;
1120
1121 return 0;
1122}
1123
1124static const struct pinctrl_ops lpc18xx_pctl_ops = {
1125 .get_groups_count = lpc18xx_pctl_get_groups_count,
1126 .get_group_name = lpc18xx_pctl_get_group_name,
1127 .get_group_pins = lpc18xx_pctl_get_group_pins,
1128 .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
1129 .dt_free_map = pinctrl_utils_dt_free_map,
1130};
1131
1132static struct pinctrl_desc lpc18xx_scu_desc = {
1133 .name = "lpc18xx/43xx-scu",
1134 .pins = lpc18xx_pins,
1135 .npins = ARRAY_SIZE(lpc18xx_pins),
1136 .pctlops = &lpc18xx_pctl_ops,
1137 .pmxops = &lpc18xx_pmx_ops,
1138 .confops = &lpc18xx_pconf_ops,
1139 .owner = THIS_MODULE,
1140};
1141
Joachim Eastwood16a48512015-05-14 14:45:58 +02001142static bool lpc18xx_valid_pin_function(unsigned pin, unsigned function)
1143{
1144 struct lpc18xx_pin_caps *p = lpc18xx_pins[pin].drv_data;
1145 int i;
1146
1147 if (function == FUNC_DAC && p->analog == DAC)
1148 return true;
1149
1150 if (function == FUNC_ADC && p->analog)
1151 return true;
1152
1153 if (function == FUNC_I2C0 && p->type == TYPE_I2C0)
1154 return true;
1155
1156 if (function == FUNC_USB1 && p->type == TYPE_USB1)
1157 return true;
1158
1159 for (i = 0; i < LPC18XX_SCU_FUNC_PER_PIN; i++) {
1160 if (function == p->functions[i])
1161 return true;
1162 }
1163
1164 return false;
1165}
1166
1167static int lpc18xx_create_group_func_map(struct device *dev,
1168 struct lpc18xx_scu_data *scu)
1169{
1170 u16 pins[ARRAY_SIZE(lpc18xx_pins)];
1171 int func, ngroups, i;
1172
1173 for (func = 0; func < FUNC_MAX; ngroups = 0, func++) {
1174
1175 for (i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) {
1176 if (lpc18xx_valid_pin_function(i, func))
1177 pins[ngroups++] = i;
1178 }
1179
1180 scu->func[func].ngroups = ngroups;
1181 scu->func[func].groups = devm_kzalloc(dev, ngroups *
1182 sizeof(char *), GFP_KERNEL);
1183 if (!scu->func[func].groups)
1184 return -ENOMEM;
1185
1186 for (i = 0; i < ngroups; i++)
1187 scu->func[func].groups[i] = lpc18xx_pins[pins[i]].name;
1188 }
1189
1190 return 0;
1191}
1192
Joachim Eastwood2f77ac92015-04-28 00:14:08 +02001193static int lpc18xx_scu_probe(struct platform_device *pdev)
1194{
1195 struct lpc18xx_scu_data *scu;
1196 struct resource *res;
1197 int ret;
1198
1199 scu = devm_kzalloc(&pdev->dev, sizeof(*scu), GFP_KERNEL);
1200 if (!scu)
1201 return -ENOMEM;
1202
1203 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1204 scu->base = devm_ioremap_resource(&pdev->dev, res);
1205 if (IS_ERR(scu->base))
1206 return PTR_ERR(scu->base);
1207
1208 scu->clk = devm_clk_get(&pdev->dev, NULL);
1209 if (IS_ERR(scu->clk)) {
1210 dev_err(&pdev->dev, "Input clock not found.\n");
1211 return PTR_ERR(scu->clk);
1212 }
1213
Joachim Eastwood16a48512015-05-14 14:45:58 +02001214 ret = lpc18xx_create_group_func_map(&pdev->dev, scu);
1215 if (ret) {
1216 dev_err(&pdev->dev, "Unable to create group func map.\n");
1217 return ret;
1218 }
1219
Joachim Eastwood2f77ac92015-04-28 00:14:08 +02001220 ret = clk_prepare_enable(scu->clk);
1221 if (ret) {
1222 dev_err(&pdev->dev, "Unable to enable clock.\n");
1223 return ret;
1224 }
1225
1226 platform_set_drvdata(pdev, scu);
1227
1228 scu->pctl = pinctrl_register(&lpc18xx_scu_desc, &pdev->dev, scu);
Masahiro Yamada323de9e2015-06-09 13:01:16 +09001229 if (IS_ERR(scu->pctl)) {
Joachim Eastwood2f77ac92015-04-28 00:14:08 +02001230 dev_err(&pdev->dev, "Could not register pinctrl driver\n");
1231 clk_disable_unprepare(scu->clk);
Masahiro Yamada323de9e2015-06-09 13:01:16 +09001232 return PTR_ERR(scu->pctl);
Joachim Eastwood2f77ac92015-04-28 00:14:08 +02001233 }
1234
1235 return 0;
1236}
1237
1238static int lpc18xx_scu_remove(struct platform_device *pdev)
1239{
1240 struct lpc18xx_scu_data *scu = platform_get_drvdata(pdev);
1241
1242 pinctrl_unregister(scu->pctl);
1243 clk_disable_unprepare(scu->clk);
1244
1245 return 0;
1246}
1247
1248static const struct of_device_id lpc18xx_scu_match[] = {
1249 { .compatible = "nxp,lpc1850-scu" },
1250 {},
1251};
1252MODULE_DEVICE_TABLE(of, lpc18xx_scu_match);
1253
1254static struct platform_driver lpc18xx_scu_driver = {
1255 .probe = lpc18xx_scu_probe,
1256 .remove = lpc18xx_scu_remove,
1257 .driver = {
1258 .name = "lpc18xx-scu",
1259 .of_match_table = lpc18xx_scu_match,
1260 },
1261};
1262module_platform_driver(lpc18xx_scu_driver);
1263
1264MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
1265MODULE_DESCRIPTION("Pinctrl driver for NXP LPC18xx/43xx SCU");
1266MODULE_LICENSE("GPL v2");