Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / b4c3804d18d37130625e1dd4d08fd9625f7eaba4 / . / arch / powerpc / boot / dts / p3060si.dtsi
blob: 68947e157bbc8975f4746476a9d058dfba86c080 [file] [log] [blame]
Shengzhou Liu96cc0172011-08-26 11:18:21 +0800[diff] [blame]1/*
2 * P3060 Silicon Device Tree Source
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/dts-v1/;
36
37/ {
38 compatible = "fsl,P3060";
39 #address-cells = <2>;
40 #size-cells = <2>;
41 interrupt-parent = <&mpic>;
42
43 aliases {
44 ccsr = &soc;
45 dcsr = &dcsr;
46
47 serial0 = &serial0;
48 serial1 = &serial1;
49 serial2 = &serial2;
50 serial3 = &serial3;
51 pci0 = &pci0;
52 pci1 = &pci1;
53 usb0 = &usb0;
54 usb1 = &usb1;
55 dma0 = &dma0;
56 dma1 = &dma1;
57 msi0 = &msi0;
58 msi1 = &msi1;
59 msi2 = &msi2;
60
61 crypto = &crypto;
62 sec_jr0 = &sec_jr0;
63 sec_jr1 = &sec_jr1;
64 sec_jr2 = &sec_jr2;
65 sec_jr3 = &sec_jr3;
66 rtic_a = &rtic_a;
67 rtic_b = &rtic_b;
68 rtic_c = &rtic_c;
69 rtic_d = &rtic_d;
70 sec_mon = &sec_mon;
71 };
72
73 cpus {
74 #address-cells = <1>;
75 #size-cells = <0>;
76
77 cpu0: PowerPC,e500mc@0 {
78 device_type = "cpu";
79 reg = <0>;
80 next-level-cache = <&L2_0>;
81 L2_0: l2-cache {
82 next-level-cache = <&cpc>;
83 };
84 };
85 cpu1: PowerPC,e500mc@1 {
86 device_type = "cpu";
87 reg = <1>;
88 next-level-cache = <&L2_1>;
89 L2_1: l2-cache {
90 next-level-cache = <&cpc>;
91 };
92 };
93 cpu4: PowerPC,e500mc@4 {
94 device_type = "cpu";
95 reg = <4>;
96 next-level-cache = <&L2_4>;
97 L2_4: l2-cache {
98 next-level-cache = <&cpc>;
99 };
100 };
101 cpu5: PowerPC,e500mc@5 {
102 device_type = "cpu";
103 reg = <5>;
104 next-level-cache = <&L2_5>;
105 L2_5: l2-cache {
106 next-level-cache = <&cpc>;
107 };
108 };
109 cpu6: PowerPC,e500mc@6 {
110 device_type = "cpu";
111 reg = <6>;
112 next-level-cache = <&L2_6>;
113 L2_6: l2-cache {
114 next-level-cache = <&cpc>;
115 };
116 };
117 cpu7: PowerPC,e500mc@7 {
118 device_type = "cpu";
119 reg = <7>;
120 next-level-cache = <&L2_7>;
121 L2_7: l2-cache {
122 next-level-cache = <&cpc>;
123 };
124 };
125 };
126
127 dcsr: dcsr@f00000000 {
128 #address-cells = <1>;
129 #size-cells = <1>;
130 compatible = "fsl,dcsr", "simple-bus";
131
132 dcsr-epu@0 {
133 compatible = "fsl,dcsr-epu";
134 interrupts = <52 2 0 0
135 84 2 0 0
136 85 2 0 0>;
137 interrupt-parent = <&mpic>;
138 reg = <0x0 0x1000>;
139 };
140 dcsr-npc {
141 compatible = "fsl,dcsr-npc";
142 reg = <0x1000 0x1000 0x1000000 0x8000>;
143 };
144 dcsr-nxc@2000 {
145 compatible = "fsl,dcsr-nxc";
146 reg = <0x2000 0x1000>;
147 };
148 dcsr-corenet {
149 compatible = "fsl,dcsr-corenet";
150 reg = <0x8000 0x1000 0xB0000 0x1000>;
151 };
152 dcsr-dpaa@9000 {
153 compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
154 reg = <0x9000 0x1000>;
155 };
156 dcsr-ocn@11000 {
157 compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
158 reg = <0x11000 0x1000>;
159 };
160 dcsr-ddr@12000 {
161 compatible = "fsl,dcsr-ddr";
162 dev-handle = <&ddr>;
163 reg = <0x12000 0x1000>;
164 };
165 dcsr-nal@18000 {
166 compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
167 reg = <0x18000 0x1000>;
168 };
169 dcsr-rcpm@22000 {
170 compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
171 reg = <0x22000 0x1000>;
172 };
173 dcsr-cpu-sb-proxy@40000 {
174 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
175 cpu-handle = <&cpu0>;
176 reg = <0x40000 0x1000>;
177 };
178 dcsr-cpu-sb-proxy@41000 {
179 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
180 cpu-handle = <&cpu1>;
181 reg = <0x41000 0x1000>;
182 };
183 dcsr-cpu-sb-proxy@44000 {
184 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
185 cpu-handle = <&cpu4>;
186 reg = <0x44000 0x1000>;
187 };
188 dcsr-cpu-sb-proxy@45000 {
189 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
190 cpu-handle = <&cpu5>;
191 reg = <0x45000 0x1000>;
192 };
193 dcsr-cpu-sb-proxy@46000 {
194 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
195 cpu-handle = <&cpu6>;
196 reg = <0x46000 0x1000>;
197 };
198 dcsr-cpu-sb-proxy@47000 {
199 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
200 cpu-handle = <&cpu7>;
201 reg = <0x47000 0x1000>;
202 };
203 };
204
205 soc: soc@ffe000000 {
206 #address-cells = <1>;
207 #size-cells = <1>;
208 device_type = "soc";
209 compatible = "simple-bus";
210 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
211 reg = <0xf 0xfe000000 0 0x00001000>;
212
213 soc-sram-error {
214 compatible = "fsl,soc-sram-error";
215 interrupts = <16 2 1 29>;
216 };
217
218 corenet-law@0 {
219 compatible = "fsl,corenet-law";
220 reg = <0x0 0x1000>;
221 fsl,num-laws = <32>;
222 };
223
224 ddr: memory-controller@8000 {
225 compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
226 reg = <0x8000 0x1000>;
227 interrupts = <16 2 1 23>;
228 };
229
230 cpc: l3-cache-controller@10000 {
231 compatible = "fsl,p3060-l3-cache-controller", "cache";
232 reg = <0x10000 0x1000
233 0x11000 0x1000>;
234 interrupts = <16 2 1 27>;
235 };
236
237 corenet-cf@18000 {
238 compatible = "fsl,corenet-cf";
239 reg = <0x18000 0x1000>;
240 interrupts = <16 2 1 31>;
241 fsl,ccf-num-csdids = <32>;
242 fsl,ccf-num-snoopids = <32>;
243 };
244
245 iommu@20000 {
246 compatible = "fsl,pamu-v1.0", "fsl,pamu";
247 reg = <0x20000 0x5000>;
248 interrupts = <
249 24 2 0 0
250 16 2 1 30>;
251 };
252
253 mpic: pic@40000 {
254 clock-frequency = <0>;
255 interrupt-controller;
256 #address-cells = <0>;
257 #interrupt-cells = <4>;
258 reg = <0x40000 0x40000>;
259 compatible = "fsl,mpic", "chrp,open-pic";
260 device_type = "open-pic";
261 };
262
263 msi0: msi@41600 {
264 compatible = "fsl,mpic-msi";
265 reg = <0x41600 0x200>;
266 msi-available-ranges = <0 0x100>;
267 interrupts = <
268 0xe0 0 0 0
269 0xe1 0 0 0
270 0xe2 0 0 0
271 0xe3 0 0 0
272 0xe4 0 0 0
273 0xe5 0 0 0
274 0xe6 0 0 0
275 0xe7 0 0 0>;
276 };
277
278 msi1: msi@41800 {
279 compatible = "fsl,mpic-msi";
280 reg = <0x41800 0x200>;
281 msi-available-ranges = <0 0x100>;
282 interrupts = <
283 0xe8 0 0 0
284 0xe9 0 0 0
285 0xea 0 0 0
286 0xeb 0 0 0
287 0xec 0 0 0
288 0xed 0 0 0
289 0xee 0 0 0
290 0xef 0 0 0>;
291 };
292
293 msi2: msi@41a00 {
294 compatible = "fsl,mpic-msi";
295 reg = <0x41a00 0x200>;
296 msi-available-ranges = <0 0x100>;
297 interrupts = <
298 0xf0 0 0 0
299 0xf1 0 0 0
300 0xf2 0 0 0
301 0xf3 0 0 0
302 0xf4 0 0 0
303 0xf5 0 0 0
304 0xf6 0 0 0
305 0xf7 0 0 0>;
306 };
307
308 rmu: rmu@d3000 {
309 #address-cells = <1>;
310 #size-cells = <1>;
311 compatible = "fsl,srio-rmu";
312 reg = <0xd3000 0x500>;
313 ranges = <0x0 0xd3000 0x500>;
314
315 message-unit@0 {
316 compatible = "fsl,srio-msg-unit";
317 reg = <0x0 0x100>;
318 interrupts = <
319 60 2 0 0 /* msg1_tx_irq */
320 61 2 0 0>;/* msg1_rx_irq */
321 };
322 message-unit@100 {
323 compatible = "fsl,srio-msg-unit";
324 reg = <0x100 0x100>;
325 interrupts = <
326 62 2 0 0 /* msg2_tx_irq */
327 63 2 0 0>;/* msg2_rx_irq */
328 };
329 doorbell-unit@400 {
330 compatible = "fsl,srio-dbell-unit";
331 reg = <0x400 0x80>;
332 interrupts = <
333 56 2 0 0 /* bell_outb_irq */
334 57 2 0 0>;/* bell_inb_irq */
335 };
336 port-write-unit@4e0 {
337 compatible = "fsl,srio-port-write-unit";
338 reg = <0x4e0 0x20>;
339 interrupts = <16 2 1 11>;
340 };
341 };
342
343 guts: global-utilities@e0000 {
344 compatible = "fsl,qoriq-device-config-1.0";
345 reg = <0xe0000 0xe00>;
346 fsl,has-rstcr;
347 #sleep-cells = <1>;
348 fsl,liodn-bits = <12>;
349 };
350
351 pins: global-utilities@e0e00 {
352 compatible = "fsl,qoriq-pin-control-1.0";
353 reg = <0xe0e00 0x200>;
354 #sleep-cells = <2>;
355 };
356
357 clockgen: global-utilities@e1000 {
358 compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
359 reg = <0xe1000 0x1000>;
360 clock-frequency = <0>;
361 };
362
363 rcpm: global-utilities@e2000 {
364 compatible = "fsl,qoriq-rcpm-1.0";
365 reg = <0xe2000 0x1000>;
366 #sleep-cells = <1>;
367 };
368
369 sfp: sfp@e8000 {
370 compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
371 reg = <0xe8000 0x1000>;
372 };
373
374 serdes: serdes@ea000 {
375 compatible = "fsl,p3060-serdes";
376 reg = <0xea000 0x1000>;
377 };
378
379 dma0: dma@100300 {
380 #address-cells = <1>;
381 #size-cells = <1>;
382 compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
383 reg = <0x100300 0x4>;
384 ranges = <0x0 0x100100 0x200>;
385 cell-index = <0>;
386 dma-channel@0 {
387 compatible = "fsl,p3060-dma-channel",
388 "fsl,eloplus-dma-channel";
389 reg = <0x0 0x80>;
390 cell-index = <0>;
391 interrupts = <28 2 0 0>;
392 };
393 dma-channel@80 {
394 compatible = "fsl,p3060-dma-channel",
395 "fsl,eloplus-dma-channel";
396 reg = <0x80 0x80>;
397 cell-index = <1>;
398 interrupts = <29 2 0 0>;
399 };
400 dma-channel@100 {
401 compatible = "fsl,p3060-dma-channel",
402 "fsl,eloplus-dma-channel";
403 reg = <0x100 0x80>;
404 cell-index = <2>;
405 interrupts = <30 2 0 0>;
406 };
407 dma-channel@180 {
408 compatible = "fsl,p3060-dma-channel",
409 "fsl,eloplus-dma-channel";
410 reg = <0x180 0x80>;
411 cell-index = <3>;
412 interrupts = <31 2 0 0>;
413 };
414 };
415
416 dma1: dma@101300 {
417 #address-cells = <1>;
418 #size-cells = <1>;
419 compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
420 reg = <0x101300 0x4>;
421 ranges = <0x0 0x101100 0x200>;
422 cell-index = <1>;
423 dma-channel@0 {
424 compatible = "fsl,p3060-dma-channel",
425 "fsl,eloplus-dma-channel";
426 reg = <0x0 0x80>;
427 cell-index = <0>;
428 interrupts = <32 2 0 0>;
429 };
430 dma-channel@80 {
431 compatible = "fsl,p3060-dma-channel",
432 "fsl,eloplus-dma-channel";
433 reg = <0x80 0x80>;
434 cell-index = <1>;
435 interrupts = <33 2 0 0>;
436 };
437 dma-channel@100 {
438 compatible = "fsl,p3060-dma-channel",
439 "fsl,eloplus-dma-channel";
440 reg = <0x100 0x80>;
441 cell-index = <2>;
442 interrupts = <34 2 0 0>;
443 };
444 dma-channel@180 {
445 compatible = "fsl,p3060-dma-channel",
446 "fsl,eloplus-dma-channel";
447 reg = <0x180 0x80>;
448 cell-index = <3>;
449 interrupts = <35 2 0 0>;
450 };
451 };
452
453 spi@110000 {
454 #address-cells = <1>;
455 #size-cells = <0>;
456 compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
457 reg = <0x110000 0x1000>;
458 interrupts = <53 0x2 0 0>;
459 fsl,espi-num-chipselects = <4>;
460 };
461
462 i2c@118000 {
463 #address-cells = <1>;
464 #size-cells = <0>;
465 cell-index = <0>;
466 compatible = "fsl-i2c";
467 reg = <0x118000 0x100>;
468 interrupts = <38 2 0 0>;
469 dfsrr;
470 };
471
472 i2c@118100 {
473 #address-cells = <1>;
474 #size-cells = <0>;
475 cell-index = <1>;
476 compatible = "fsl-i2c";
477 reg = <0x118100 0x100>;
478 interrupts = <38 2 0 0>;
479 dfsrr;
480 };
481
482 i2c@119000 {
483 #address-cells = <1>;
484 #size-cells = <0>;
485 cell-index = <2>;
486 compatible = "fsl-i2c";
487 reg = <0x119000 0x100>;
488 interrupts = <39 2 0 0>;
489 dfsrr;
490 };
491
492 i2c@119100 {
493 #address-cells = <1>;
494 #size-cells = <0>;
495 cell-index = <3>;
496 compatible = "fsl-i2c";
497 reg = <0x119100 0x100>;
498 interrupts = <39 2 0 0>;
499 dfsrr;
500 };
501
502 serial0: serial@11c500 {
503 cell-index = <0>;
504 device_type = "serial";
505 compatible = "ns16550";
506 reg = <0x11c500 0x100>;
507 clock-frequency = <0>;
508 interrupts = <36 2 0 0>;
509 };
510
511 serial1: serial@11c600 {
512 cell-index = <1>;
513 device_type = "serial";
514 compatible = "ns16550";
515 reg = <0x11c600 0x100>;
516 clock-frequency = <0>;
517 interrupts = <36 2 0 0>;
518 };
519
520 serial2: serial@11d500 {
521 cell-index = <2>;
522 device_type = "serial";
523 compatible = "ns16550";
524 reg = <0x11d500 0x100>;
525 clock-frequency = <0>;
526 interrupts = <37 2 0 0>;
527 };
528
529 serial3: serial@11d600 {
530 cell-index = <3>;
531 device_type = "serial";
532 compatible = "ns16550";
533 reg = <0x11d600 0x100>;
534 clock-frequency = <0>;
535 interrupts = <37 2 0 0>;
536 };
537
538 gpio0: gpio@130000 {
539 compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
540 reg = <0x130000 0x1000>;
541 interrupts = <55 2 0 0>;
542 #gpio-cells = <2>;
543 gpio-controller;
544 };
545
546 usb0: usb@210000 {
547 compatible = "fsl,p3060-usb2-mph",
548 "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
549 reg = <0x210000 0x1000>;
550 #address-cells = <1>;
551 #size-cells = <0>;
552 interrupts = <44 0x2 0 0>;
553 };
554
555 usb1: usb@211000 {
556 compatible = "fsl,p3060-usb2-dr",
557 "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
558 reg = <0x211000 0x1000>;
559 #address-cells = <1>;
560 #size-cells = <0>;
561 interrupts = <45 0x2 0 0>;
562 };
563
564 crypto: crypto@300000 {
565 compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
566 #address-cells = <1>;
567 #size-cells = <1>;
568 reg = <0x300000 0x10000>;
569 ranges = <0 0x300000 0x10000>;
570 interrupt-parent = <&mpic>;
571 interrupts = <92 2 0 0>;
572
573 sec_jr0: jr@1000 {
574 compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
575 reg = <0x1000 0x1000>;
576 interrupt-parent = <&mpic>;
577 interrupts = <88 2 0 0>;
578 };
579
580 sec_jr1: jr@2000 {
581 compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
582 reg = <0x2000 0x1000>;
583 interrupt-parent = <&mpic>;
584 interrupts = <89 2 0 0>;
585 };
586
587 sec_jr2: jr@3000 {
588 compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
589 reg = <0x3000 0x1000>;
590 interrupt-parent = <&mpic>;
591 interrupts = <90 2 0 0>;
592 };
593
594 sec_jr3: jr@4000 {
595 compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
596 reg = <0x4000 0x1000>;
597 interrupt-parent = <&mpic>;
598 interrupts = <91 2 0 0>;
599 };
600
601 rtic@6000 {
602 compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
603 #address-cells = <1>;
604 #size-cells = <1>;
605 reg = <0x6000 0x100>;
606 ranges = <0x0 0x6100 0xe00>;
607
608 rtic_a: rtic-a@0 {
609 compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
610 reg = <0x00 0x20 0x100 0x80>;
611 };
612
613 rtic_b: rtic-b@20 {
614 compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
615 reg = <0x20 0x20 0x200 0x80>;
616 };
617
618 rtic_c: rtic-c@40 {
619 compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
620 reg = <0x40 0x20 0x300 0x80>;
621 };
622
623 rtic_d: rtic-d@60 {
624 compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
625 reg = <0x60 0x20 0x500 0x80>;
626 };
627 };
628 };
629
630 sec_mon: sec_mon@314000 {
631 compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
632 reg = <0x314000 0x1000>;
633 interrupt-parent = <&mpic>;
634 interrupts = <93 2 0 0>;
635 };
636 };
637
638 rapidio@ffe0c0000 {
639 compatible = "fsl,srio";
640 interrupts = <16 2 1 11>;
641 #address-cells = <2>;
642 #size-cells = <2>;
643 fsl,srio-rmu-handle = <&rmu>;
644 ranges;
645
646 port1 {
647 #address-cells = <2>;
648 #size-cells = <2>;
649 cell-index = <1>;
650 };
651
652 port2 {
653 #address-cells = <2>;
654 #size-cells = <2>;
655 cell-index = <2>;
656 };
657 };
658
659 localbus@ffe124000 {
660 compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
661 interrupts = <25 2 0 0>;
662 #address-cells = <2>;
663 #size-cells = <1>;
664 };
665
666 pci0: pcie@ffe200000 {
667 compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
668 device_type = "pci";
669 #size-cells = <2>;
670 #address-cells = <3>;
671 bus-range = <0x0 0xff>;
672 clock-frequency = <33333333>;
673 fsl,msi = <&msi0>;
674 interrupts = <16 2 1 15>;
675 pcie@0 {
676 reg = <0 0 0 0 0>;
677 #interrupt-cells = <1>;
678 #size-cells = <2>;
679 #address-cells = <3>;
680 device_type = "pci";
681 interrupts = <16 2 1 15>;
682 interrupt-map-mask = <0xf800 0 0 7>;
683 interrupt-map = <
684 /* IDSEL 0x0 */
685 0000 0 0 1 &mpic 40 1 0 0
686 0000 0 0 2 &mpic 1 1 0 0
687 0000 0 0 3 &mpic 2 1 0 0
688 0000 0 0 4 &mpic 3 1 0 0
689 >;
690 };
691 };
692
693 pci1: pcie@ffe201000 {
694 compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
695 device_type = "pci";
696 #size-cells = <2>;
697 #address-cells = <3>;
698 bus-range = <0 0xff>;
699 clock-frequency = <33333333>;
700 fsl,msi = <&msi1>;
701 interrupts = <16 2 1 14>;
702 pcie@0 {
703 reg = <0 0 0 0 0>;
704 #interrupt-cells = <1>;
705 #size-cells = <2>;
706 #address-cells = <3>;
707 device_type = "pci";
708 interrupts = <16 2 1 14>;
709 interrupt-map-mask = <0xf800 0 0 7>;
710 interrupt-map = <
711 /* IDSEL 0x0 */
712 0000 0 0 1 &mpic 41 1 0 0
713 0000 0 0 2 &mpic 5 1 0 0
714 0000 0 0 3 &mpic 6 1 0 0
715 0000 0 0 4 &mpic 7 1 0 0
716 >;
717 };
718 };
719};