blob: 14b7305d2ba0b3cc24aa101e76c87e242f01f537 [file] [log] [blame]
Brian Norris766a2d92015-05-12 16:28:21 -07001/*
2 * Broadcom SATA3 AHCI Controller Driver
3 *
4 * Copyright © 2009-2015 Broadcom Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2, or (at your option)
9 * any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16
17#include <linux/ahci_platform.h>
18#include <linux/compiler.h>
19#include <linux/device.h>
20#include <linux/init.h>
21#include <linux/interrupt.h>
22#include <linux/io.h>
23#include <linux/kernel.h>
24#include <linux/libata.h>
25#include <linux/module.h>
26#include <linux/of.h>
27#include <linux/platform_device.h>
28#include <linux/string.h>
29
30#include "ahci.h"
31
32#define DRV_NAME "brcm-ahci"
33
34#define SATA_TOP_CTRL_VERSION 0x0
35#define SATA_TOP_CTRL_BUS_CTRL 0x4
36 #define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
37 #define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
38 #define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
39 #define PIODATA_ENDIAN_SHIFT 6
40 #define ENDIAN_SWAP_NONE 0
41 #define ENDIAN_SWAP_FULL 2
42 #define OVERRIDE_HWINIT BIT(16)
43#define SATA_TOP_CTRL_TP_CTRL 0x8
44#define SATA_TOP_CTRL_PHY_CTRL 0xc
45 #define SATA_TOP_CTRL_PHY_CTRL_1 0x0
46 #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
47 #define SATA_TOP_CTRL_PHY_CTRL_2 0x4
48 #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
49 #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
50 #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
51 #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
52 #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
53 #define SATA_TOP_CTRL_PHY_OFFS 0x8
54 #define SATA_TOP_MAX_PHYS 2
55#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c
56#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20
57
58/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
59#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
60#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
61#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
62#else
63#define DATA_ENDIAN 0
64#define MMIO_ENDIAN 0
65#endif
66
67#define BUS_CTRL_ENDIAN_CONF \
68 ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \
69 (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
70 (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
71
72struct brcm_ahci_priv {
73 struct device *dev;
74 void __iomem *top_ctrl;
75 u32 port_mask;
76};
77
78static const struct ata_port_info ahci_brcm_port_info = {
79 .flags = AHCI_FLAG_COMMON,
80 .pio_mask = ATA_PIO4,
81 .udma_mask = ATA_UDMA6,
82 .port_ops = &ahci_platform_ops,
83};
84
85static inline u32 brcm_sata_readreg(void __iomem *addr)
86{
87 /*
88 * MIPS endianness is configured by boot strap, which also reverses all
89 * bus endianness (i.e., big-endian CPU + big endian bus ==> native
90 * endian I/O).
91 *
92 * Other architectures (e.g., ARM) either do not support big endian, or
93 * else leave I/O in little endian mode.
94 */
Axel Linf9114d32015-08-06 12:28:18 +080095 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
Brian Norris766a2d92015-05-12 16:28:21 -070096 return __raw_readl(addr);
97 else
98 return readl_relaxed(addr);
99}
100
101static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
102{
103 /* See brcm_sata_readreg() comments */
Axel Linf9114d32015-08-06 12:28:18 +0800104 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
Brian Norris766a2d92015-05-12 16:28:21 -0700105 __raw_writel(val, addr);
106 else
107 writel_relaxed(val, addr);
108}
109
110static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
111{
112 void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
113 (port * SATA_TOP_CTRL_PHY_OFFS);
114 void __iomem *p;
115 u32 reg;
116
117 /* clear PHY_DEFAULT_POWER_STATE */
118 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
119 reg = brcm_sata_readreg(p);
120 reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
121 brcm_sata_writereg(reg, p);
122
123 /* reset the PHY digital logic */
124 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
125 reg = brcm_sata_readreg(p);
126 reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
127 SATA_TOP_CTRL_2_SW_RST_RX);
128 reg |= SATA_TOP_CTRL_2_SW_RST_TX;
129 brcm_sata_writereg(reg, p);
130 reg = brcm_sata_readreg(p);
131 reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
132 brcm_sata_writereg(reg, p);
133 reg = brcm_sata_readreg(p);
134 reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
135 brcm_sata_writereg(reg, p);
136 (void)brcm_sata_readreg(p);
137}
138
139static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
140{
141 void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
142 (port * SATA_TOP_CTRL_PHY_OFFS);
143 void __iomem *p;
144 u32 reg;
145
146 /* power-off the PHY digital logic */
147 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
148 reg = brcm_sata_readreg(p);
149 reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
150 SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
151 SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
152 brcm_sata_writereg(reg, p);
153
154 /* set PHY_DEFAULT_POWER_STATE */
155 p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
156 reg = brcm_sata_readreg(p);
157 reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
158 brcm_sata_writereg(reg, p);
159}
160
161static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
162{
163 int i;
164
165 for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
166 if (priv->port_mask & BIT(i))
167 brcm_sata_phy_enable(priv, i);
168}
169
170static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
171{
172 int i;
173
174 for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
175 if (priv->port_mask & BIT(i))
176 brcm_sata_phy_disable(priv, i);
177}
178
179static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
180 struct brcm_ahci_priv *priv)
181{
182 void __iomem *ahci;
183 struct resource *res;
184 u32 impl;
185
186 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
187 ahci = devm_ioremap_resource(&pdev->dev, res);
188 if (IS_ERR(ahci))
189 return 0;
190
191 impl = readl(ahci + HOST_PORTS_IMPL);
192
193 if (fls(impl) > SATA_TOP_MAX_PHYS)
194 dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
195 impl);
196 else if (!impl)
197 dev_info(priv->dev, "no ports found\n");
198
199 devm_iounmap(&pdev->dev, ahci);
200 devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
201
202 return impl;
203}
204
205static void brcm_sata_init(struct brcm_ahci_priv *priv)
206{
207 /* Configure endianness */
208 brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
209 priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
210}
211
Florian Fainelli8b34fe52015-07-14 13:03:33 -0700212#ifdef CONFIG_PM_SLEEP
Brian Norris766a2d92015-05-12 16:28:21 -0700213static int brcm_ahci_suspend(struct device *dev)
214{
215 struct ata_host *host = dev_get_drvdata(dev);
216 struct ahci_host_priv *hpriv = host->private_data;
217 struct brcm_ahci_priv *priv = hpriv->plat_data;
218 int ret;
219
220 ret = ahci_platform_suspend(dev);
221 brcm_sata_phys_disable(priv);
222 return ret;
223}
224
225static int brcm_ahci_resume(struct device *dev)
226{
227 struct ata_host *host = dev_get_drvdata(dev);
228 struct ahci_host_priv *hpriv = host->private_data;
229 struct brcm_ahci_priv *priv = hpriv->plat_data;
230
231 brcm_sata_init(priv);
232 brcm_sata_phys_enable(priv);
233 return ahci_platform_resume(dev);
234}
Florian Fainelli8b34fe52015-07-14 13:03:33 -0700235#endif
Brian Norris766a2d92015-05-12 16:28:21 -0700236
237static struct scsi_host_template ahci_platform_sht = {
238 AHCI_SHT(DRV_NAME),
239};
240
241static int brcm_ahci_probe(struct platform_device *pdev)
242{
243 struct device *dev = &pdev->dev;
244 struct brcm_ahci_priv *priv;
245 struct ahci_host_priv *hpriv;
246 struct resource *res;
247 int ret;
248
249 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
250 if (!priv)
251 return -ENOMEM;
252 priv->dev = dev;
253
254 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
255 priv->top_ctrl = devm_ioremap_resource(dev, res);
256 if (IS_ERR(priv->top_ctrl))
257 return PTR_ERR(priv->top_ctrl);
258
259 brcm_sata_init(priv);
260
261 priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
262 if (!priv->port_mask)
263 return -ENODEV;
264
265 brcm_sata_phys_enable(priv);
266
267 hpriv = ahci_platform_get_resources(pdev);
268 if (IS_ERR(hpriv))
269 return PTR_ERR(hpriv);
270 hpriv->plat_data = priv;
271
272 ret = ahci_platform_enable_resources(hpriv);
273 if (ret)
274 return ret;
275
276 ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
277 &ahci_platform_sht);
278 if (ret)
279 return ret;
280
281 dev_info(dev, "Broadcom AHCI SATA3 registered\n");
282
283 return 0;
284}
285
286static int brcm_ahci_remove(struct platform_device *pdev)
287{
288 struct ata_host *host = dev_get_drvdata(&pdev->dev);
289 struct ahci_host_priv *hpriv = host->private_data;
290 struct brcm_ahci_priv *priv = hpriv->plat_data;
291 int ret;
292
293 ret = ata_platform_remove_one(pdev);
294 if (ret)
295 return ret;
296
297 brcm_sata_phys_disable(priv);
298
299 return 0;
300}
301
302static const struct of_device_id ahci_of_match[] = {
303 {.compatible = "brcm,bcm7445-ahci"},
304 {},
305};
306MODULE_DEVICE_TABLE(of, ahci_of_match);
307
308static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
309
310static struct platform_driver brcm_ahci_driver = {
311 .probe = brcm_ahci_probe,
312 .remove = brcm_ahci_remove,
313 .driver = {
314 .name = DRV_NAME,
315 .of_match_table = ahci_of_match,
316 .pm = &ahci_brcm_pm_ops,
317 },
318};
319module_platform_driver(brcm_ahci_driver);
320
321MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
322MODULE_AUTHOR("Brian Norris");
323MODULE_LICENSE("GPL");
324MODULE_ALIAS("platform:sata-brcmstb");