blob: f93799873721290c38b774b9668ad5bb0dd91365 [file] [log] [blame]
dea31012005-04-17 16:05:31 -05001/*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
James.Smart@Emulex.Comc44ce172005-06-25 10:34:39 -04003 * Fibre Channel Host Bus Adapters. *
Jamie Wellnitz0c6ac8e2006-02-28 19:25:36 -05004 * Copyright (C) 2004-2006 Emulex. All rights reserved. *
James.Smart@Emulex.Comc44ce172005-06-25 10:34:39 -04005 * EMULEX and SLI are trademarks of Emulex. *
dea31012005-04-17 16:05:31 -05006 * www.emulex.com *
James.Smart@Emulex.Comc44ce172005-06-25 10:34:39 -04007 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
dea31012005-04-17 16:05:31 -05008 * *
9 * This program is free software; you can redistribute it and/or *
James.Smart@Emulex.Comc44ce172005-06-25 10:34:39 -040010 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
dea31012005-04-17 16:05:31 -050020 *******************************************************************/
21
dea31012005-04-17 16:05:31 -050022#include <linux/pci.h>
23#include <linux/interrupt.h>
24
25#include <scsi/scsi.h>
26#include <scsi/scsi_device.h>
27#include <scsi/scsi_host.h>
28#include <scsi/scsi_tcq.h>
29#include <scsi/scsi_transport_fc.h>
30
31#include "lpfc_version.h"
32#include "lpfc_hw.h"
33#include "lpfc_sli.h"
34#include "lpfc_disc.h"
35#include "lpfc_scsi.h"
36#include "lpfc.h"
37#include "lpfc_logmsg.h"
38#include "lpfc_crtn.h"
39
40#define LPFC_RESET_WAIT 2
41#define LPFC_ABORT_WAIT 2
42
dea31012005-04-17 16:05:31 -050043
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -050044static inline void
45lpfc_block_requests(struct lpfc_hba * phba)
46{
47 down(&phba->hba_can_block);
48 scsi_block_requests(phba->host);
49}
50
51static inline void
52lpfc_unblock_requests(struct lpfc_hba * phba)
53{
54 scsi_unblock_requests(phba->host);
55 up(&phba->hba_can_block);
56}
57
dea31012005-04-17 16:05:31 -050058/*
59 * This routine allocates a scsi buffer, which contains all the necessary
60 * information needed to initiate a SCSI I/O. The non-DMAable buffer region
61 * contains information to build the IOCB. The DMAable region contains
62 * memory for the FCP CMND, FCP RSP, and the inital BPL. In addition to
63 * allocating memeory, the FCP CMND and FCP RSP BDEs are setup in the BPL
64 * and the BPL BDE is setup in the IOCB.
65 */
66static struct lpfc_scsi_buf *
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -040067lpfc_new_scsi_buf(struct lpfc_hba * phba)
dea31012005-04-17 16:05:31 -050068{
69 struct lpfc_scsi_buf *psb;
70 struct ulp_bde64 *bpl;
71 IOCB_t *iocb;
72 dma_addr_t pdma_phys;
James Bottomley604a3e32005-10-29 10:28:33 -050073 uint16_t iotag;
dea31012005-04-17 16:05:31 -050074
75 psb = kmalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
76 if (!psb)
77 return NULL;
78 memset(psb, 0, sizeof (struct lpfc_scsi_buf));
79 psb->scsi_hba = phba;
80
81 /*
82 * Get memory from the pci pool to map the virt space to pci bus space
83 * for an I/O. The DMA buffer includes space for the struct fcp_cmnd,
84 * struct fcp_rsp and the number of bde's necessary to support the
85 * sg_tablesize.
86 */
87 psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
88 &psb->dma_handle);
89 if (!psb->data) {
90 kfree(psb);
91 return NULL;
92 }
93
94 /* Initialize virtual ptrs to dma_buf region. */
95 memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
96
James Bottomley604a3e32005-10-29 10:28:33 -050097 /* Allocate iotag for psb->cur_iocbq. */
98 iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
99 if (iotag == 0) {
100 pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
101 psb->data, psb->dma_handle);
102 kfree (psb);
103 return NULL;
104 }
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400105 psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
James Bottomley604a3e32005-10-29 10:28:33 -0500106
dea31012005-04-17 16:05:31 -0500107 psb->fcp_cmnd = psb->data;
108 psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
109 psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
110 sizeof(struct fcp_rsp);
111
112 /* Initialize local short-hand pointers. */
113 bpl = psb->fcp_bpl;
114 pdma_phys = psb->dma_handle;
115
116 /*
117 * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
118 * list bdes. Initialize the first two and leave the rest for
119 * queuecommand.
120 */
121 bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
122 bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
123 bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd);
124 bpl->tus.f.bdeFlags = BUFF_USE_CMND;
125 bpl->tus.w = le32_to_cpu(bpl->tus.w);
126 bpl++;
127
128 /* Setup the physical region for the FCP RSP */
129 pdma_phys += sizeof (struct fcp_cmnd);
130 bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
131 bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
132 bpl->tus.f.bdeSize = sizeof (struct fcp_rsp);
133 bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV);
134 bpl->tus.w = le32_to_cpu(bpl->tus.w);
135
136 /*
137 * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
138 * initialize it with all known data now.
139 */
140 pdma_phys += (sizeof (struct fcp_rsp));
141 iocb = &psb->cur_iocbq.iocb;
142 iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
143 iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys);
144 iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys);
145 iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
146 iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL;
147 iocb->ulpBdeCount = 1;
148 iocb->ulpClass = CLASS3;
149
150 return psb;
151}
152
Adrian Bunk455c53e2006-01-06 20:21:28 +0100153static struct lpfc_scsi_buf*
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500154lpfc_get_scsi_buf(struct lpfc_hba * phba)
dea31012005-04-17 16:05:31 -0500155{
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400156 struct lpfc_scsi_buf * lpfc_cmd = NULL;
157 struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500158 unsigned long iflag = 0;
dea31012005-04-17 16:05:31 -0500159
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500160 spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400161 list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500162 spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400163 return lpfc_cmd;
164}
165
166static void
167lpfc_release_scsi_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
168{
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500169 unsigned long iflag = 0;
dea31012005-04-17 16:05:31 -0500170 /*
171 * There are only two special cases to consider. (1) the scsi command
172 * requested scatter-gather usage or (2) the scsi command allocated
173 * a request buffer, but did not request use_sg. There is a third
174 * case, but it does not require resource deallocation.
175 */
176 if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) {
177 dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
178 psb->seg_cnt, psb->pCmd->sc_data_direction);
179 } else {
180 if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) {
181 dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys,
182 psb->pCmd->request_bufflen,
183 psb->pCmd->sc_data_direction);
184 }
185 }
186
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500187 spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400188 psb->pCmd = NULL;
dea31012005-04-17 16:05:31 -0500189 list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500190 spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
dea31012005-04-17 16:05:31 -0500191}
192
193static int
194lpfc_scsi_prep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd)
195{
196 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
197 struct scatterlist *sgel = NULL;
198 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
199 struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
200 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
201 dma_addr_t physaddr;
202 uint32_t i, num_bde = 0;
203 int datadir = scsi_cmnd->sc_data_direction;
204 int dma_error;
205
206 /*
207 * There are three possibilities here - use scatter-gather segment, use
208 * the single mapping, or neither. Start the lpfc command prep by
209 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
210 * data bde entry.
211 */
212 bpl += 2;
213 if (scsi_cmnd->use_sg) {
214 /*
215 * The driver stores the segment count returned from pci_map_sg
216 * because this a count of dma-mappings used to map the use_sg
217 * pages. They are not guaranteed to be the same for those
218 * architectures that implement an IOMMU.
219 */
220 sgel = (struct scatterlist *)scsi_cmnd->request_buffer;
221 lpfc_cmd->seg_cnt = dma_map_sg(&phba->pcidev->dev, sgel,
222 scsi_cmnd->use_sg, datadir);
223 if (lpfc_cmd->seg_cnt == 0)
224 return 1;
225
226 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
227 printk(KERN_ERR "%s: Too many sg segments from "
228 "dma_map_sg. Config %d, seg_cnt %d",
229 __FUNCTION__, phba->cfg_sg_seg_cnt,
230 lpfc_cmd->seg_cnt);
231 dma_unmap_sg(&phba->pcidev->dev, sgel,
232 lpfc_cmd->seg_cnt, datadir);
233 return 1;
234 }
235
236 /*
237 * The driver established a maximum scatter-gather segment count
238 * during probe that limits the number of sg elements in any
239 * single scsi command. Just run through the seg_cnt and format
240 * the bde's.
241 */
242 for (i = 0; i < lpfc_cmd->seg_cnt; i++) {
243 physaddr = sg_dma_address(sgel);
244 bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
245 bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
246 bpl->tus.f.bdeSize = sg_dma_len(sgel);
247 if (datadir == DMA_TO_DEVICE)
248 bpl->tus.f.bdeFlags = 0;
249 else
250 bpl->tus.f.bdeFlags = BUFF_USE_RCV;
251 bpl->tus.w = le32_to_cpu(bpl->tus.w);
252 bpl++;
253 sgel++;
254 num_bde++;
255 }
256 } else if (scsi_cmnd->request_buffer && scsi_cmnd->request_bufflen) {
257 physaddr = dma_map_single(&phba->pcidev->dev,
258 scsi_cmnd->request_buffer,
259 scsi_cmnd->request_bufflen,
260 datadir);
261 dma_error = dma_mapping_error(physaddr);
262 if (dma_error) {
263 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
264 "%d:0718 Unable to dma_map_single "
265 "request_buffer: x%x\n",
266 phba->brd_no, dma_error);
267 return 1;
268 }
269
270 lpfc_cmd->nonsg_phys = physaddr;
271 bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
272 bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
273 bpl->tus.f.bdeSize = scsi_cmnd->request_bufflen;
274 if (datadir == DMA_TO_DEVICE)
275 bpl->tus.f.bdeFlags = 0;
James.Smart@Emulex.Com483f05f2005-08-10 15:02:45 -0400276 else
277 bpl->tus.f.bdeFlags = BUFF_USE_RCV;
dea31012005-04-17 16:05:31 -0500278 bpl->tus.w = le32_to_cpu(bpl->tus.w);
279 num_bde = 1;
280 bpl++;
281 }
282
283 /*
284 * Finish initializing those IOCB fields that are dependent on the
James.Smart@Emulex.Com483f05f2005-08-10 15:02:45 -0400285 * scsi_cmnd request_buffer. Note that the bdeSize is explicitly
286 * reinitialized since all iocb memory resources are used many times
287 * for transmit, receive, and continuation bpl's.
dea31012005-04-17 16:05:31 -0500288 */
James.Smart@Emulex.Com483f05f2005-08-10 15:02:45 -0400289 iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
dea31012005-04-17 16:05:31 -0500290 iocb_cmd->un.fcpi64.bdl.bdeSize +=
291 (num_bde * sizeof (struct ulp_bde64));
292 iocb_cmd->ulpBdeCount = 1;
293 iocb_cmd->ulpLe = 1;
294 fcp_cmnd->fcpDl = be32_to_cpu(scsi_cmnd->request_bufflen);
295 return 0;
296}
297
298static void
299lpfc_handle_fcp_err(struct lpfc_scsi_buf *lpfc_cmd)
300{
301 struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
302 struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
303 struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
304 struct lpfc_hba *phba = lpfc_cmd->scsi_hba;
305 uint32_t fcpi_parm = lpfc_cmd->cur_iocbq.iocb.un.fcpi.fcpi_parm;
306 uint32_t resp_info = fcprsp->rspStatus2;
307 uint32_t scsi_status = fcprsp->rspStatus3;
308 uint32_t host_status = DID_OK;
309 uint32_t rsplen = 0;
310
311 /*
312 * If this is a task management command, there is no
313 * scsi packet associated with this lpfc_cmd. The driver
314 * consumes it.
315 */
316 if (fcpcmd->fcpCntl2) {
317 scsi_status = 0;
318 goto out;
319 }
320
321 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
322 "%d:0730 FCP command failed: RSP "
323 "Data: x%x x%x x%x x%x x%x x%x\n",
324 phba->brd_no, resp_info, scsi_status,
325 be32_to_cpu(fcprsp->rspResId),
326 be32_to_cpu(fcprsp->rspSnsLen),
327 be32_to_cpu(fcprsp->rspRspLen),
328 fcprsp->rspInfo3);
329
330 if (resp_info & RSP_LEN_VALID) {
331 rsplen = be32_to_cpu(fcprsp->rspRspLen);
332 if ((rsplen != 0 && rsplen != 4 && rsplen != 8) ||
333 (fcprsp->rspInfo3 != RSP_NO_FAILURE)) {
334 host_status = DID_ERROR;
335 goto out;
336 }
337 }
338
339 if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
340 uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
341 if (snslen > SCSI_SENSE_BUFFERSIZE)
342 snslen = SCSI_SENSE_BUFFERSIZE;
343
344 memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
345 }
346
347 cmnd->resid = 0;
348 if (resp_info & RESID_UNDER) {
349 cmnd->resid = be32_to_cpu(fcprsp->rspResId);
350
351 lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
352 "%d:0716 FCP Read Underrun, expected %d, "
353 "residual %d Data: x%x x%x x%x\n", phba->brd_no,
354 be32_to_cpu(fcpcmd->fcpDl), cmnd->resid,
355 fcpi_parm, cmnd->cmnd[0], cmnd->underflow);
356
357 /*
358 * The cmnd->underflow is the minimum number of bytes that must
359 * be transfered for this command. Provided a sense condition
360 * is not present, make sure the actual amount transferred is at
361 * least the underflow value or fail.
362 */
363 if (!(resp_info & SNS_LEN_VALID) &&
364 (scsi_status == SAM_STAT_GOOD) &&
365 (cmnd->request_bufflen - cmnd->resid) < cmnd->underflow) {
366 lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
367 "%d:0717 FCP command x%x residual "
368 "underrun converted to error "
369 "Data: x%x x%x x%x\n", phba->brd_no,
370 cmnd->cmnd[0], cmnd->request_bufflen,
371 cmnd->resid, cmnd->underflow);
372
373 host_status = DID_ERROR;
374 }
375 } else if (resp_info & RESID_OVER) {
376 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
377 "%d:0720 FCP command x%x residual "
378 "overrun error. Data: x%x x%x \n",
379 phba->brd_no, cmnd->cmnd[0],
380 cmnd->request_bufflen, cmnd->resid);
381 host_status = DID_ERROR;
382
383 /*
384 * Check SLI validation that all the transfer was actually done
385 * (fcpi_parm should be zero). Apply check only to reads.
386 */
387 } else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
388 (cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
389 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
390 "%d:0734 FCP Read Check Error Data: "
391 "x%x x%x x%x x%x\n", phba->brd_no,
392 be32_to_cpu(fcpcmd->fcpDl),
393 be32_to_cpu(fcprsp->rspResId),
394 fcpi_parm, cmnd->cmnd[0]);
395 host_status = DID_ERROR;
396 cmnd->resid = cmnd->request_bufflen;
397 }
398
399 out:
400 cmnd->result = ScsiResult(host_status, scsi_status);
401}
402
403static void
404lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
405 struct lpfc_iocbq *pIocbOut)
406{
407 struct lpfc_scsi_buf *lpfc_cmd =
408 (struct lpfc_scsi_buf *) pIocbIn->context1;
409 struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
410 struct lpfc_nodelist *pnode = rdata->pnode;
411 struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
James.Smart@Emulex.Com445cf4f2005-11-28 11:42:38 -0500412 int result;
413 struct scsi_device *sdev, *tmp_sdev;
414 int depth = 0;
dea31012005-04-17 16:05:31 -0500415
416 lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
417 lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
418
419 if (lpfc_cmd->status) {
420 if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
421 (lpfc_cmd->result & IOERR_DRVR_MASK))
422 lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
423 else if (lpfc_cmd->status >= IOSTAT_CNT)
424 lpfc_cmd->status = IOSTAT_DEFAULT;
425
426 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
427 "%d:0729 FCP cmd x%x failed <%d/%d> status: "
428 "x%x result: x%x Data: x%x x%x\n",
429 phba->brd_no, cmd->cmnd[0], cmd->device->id,
430 cmd->device->lun, lpfc_cmd->status,
431 lpfc_cmd->result, pIocbOut->iocb.ulpContext,
432 lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
433
434 switch (lpfc_cmd->status) {
435 case IOSTAT_FCP_RSP_ERROR:
436 /* Call FCP RSP handler to determine result */
437 lpfc_handle_fcp_err(lpfc_cmd);
438 break;
439 case IOSTAT_NPORT_BSY:
440 case IOSTAT_FABRIC_BSY:
441 cmd->result = ScsiResult(DID_BUS_BUSY, 0);
442 break;
443 default:
444 cmd->result = ScsiResult(DID_ERROR, 0);
445 break;
446 }
447
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -0400448 if ((pnode == NULL )
449 || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
450 cmd->result = ScsiResult(DID_BUS_BUSY, SAM_STAT_BUSY);
dea31012005-04-17 16:05:31 -0500451 } else {
452 cmd->result = ScsiResult(DID_OK, 0);
453 }
454
455 if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
456 uint32_t *lp = (uint32_t *)cmd->sense_buffer;
457
458 lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
459 "%d:0710 Iodone <%d/%d> cmd %p, error x%x "
460 "SNS x%x x%x Data: x%x x%x\n",
461 phba->brd_no, cmd->device->id,
462 cmd->device->lun, cmd, cmd->result,
463 *lp, *(lp + 3), cmd->retries, cmd->resid);
464 }
465
James.Smart@Emulex.Com445cf4f2005-11-28 11:42:38 -0500466 result = cmd->result;
467 sdev = cmd->device;
dea31012005-04-17 16:05:31 -0500468 cmd->scsi_done(cmd);
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400469
Jamie Wellnitzb8086082006-02-28 22:33:12 -0500470 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
471 lpfc_release_scsi_buf(phba, lpfc_cmd);
472 return;
473 }
474
Jamie Wellnitz0c6ac8e2006-02-28 19:25:36 -0500475 if (!result && pnode != NULL &&
James.Smart@Emulex.Com445cf4f2005-11-28 11:42:38 -0500476 ((jiffies - pnode->last_ramp_up_time) >
477 LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
478 ((jiffies - pnode->last_q_full_time) >
479 LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
480 (phba->cfg_lun_queue_depth > sdev->queue_depth)) {
481 shost_for_each_device(tmp_sdev, sdev->host) {
482 if (phba->cfg_lun_queue_depth > tmp_sdev->queue_depth) {
483 if (tmp_sdev->id != sdev->id)
484 continue;
485 if (tmp_sdev->ordered_tags)
486 scsi_adjust_queue_depth(tmp_sdev,
487 MSG_ORDERED_TAG,
488 tmp_sdev->queue_depth+1);
489 else
490 scsi_adjust_queue_depth(tmp_sdev,
491 MSG_SIMPLE_TAG,
492 tmp_sdev->queue_depth+1);
493
494 pnode->last_ramp_up_time = jiffies;
495 }
496 }
497 }
498
499 /*
500 * Check for queue full. If the lun is reporting queue full, then
501 * back off the lun queue depth to prevent target overloads.
502 */
Jamie Wellnitz0c6ac8e2006-02-28 19:25:36 -0500503 if (result == SAM_STAT_TASK_SET_FULL && pnode != NULL) {
James.Smart@Emulex.Com445cf4f2005-11-28 11:42:38 -0500504 pnode->last_q_full_time = jiffies;
505
506 shost_for_each_device(tmp_sdev, sdev->host) {
507 if (tmp_sdev->id != sdev->id)
508 continue;
509 depth = scsi_track_queue_full(tmp_sdev,
510 tmp_sdev->queue_depth - 1);
511 }
512 /*
513 * The queue depth cannot be lowered any more.
514 * Modify the returned error code to store
515 * the final depth value set by
516 * scsi_track_queue_full.
517 */
518 if (depth == -1)
519 depth = sdev->host->cmd_per_lun;
520
521 if (depth) {
522 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
523 "%d:0711 detected queue full - lun queue depth "
524 " adjusted to %d.\n", phba->brd_no, depth);
525 }
526 }
527
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400528 lpfc_release_scsi_buf(phba, lpfc_cmd);
dea31012005-04-17 16:05:31 -0500529}
530
531static void
532lpfc_scsi_prep_cmnd(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd,
533 struct lpfc_nodelist *pnode)
534{
535 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
536 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
537 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
538 struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
539 int datadir = scsi_cmnd->sc_data_direction;
540
541 lpfc_cmd->fcp_rsp->rspSnsLen = 0;
James.Smart@Emulex.Com69859dc2005-08-10 15:02:37 -0400542 /* clear task management bits */
543 lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;
dea31012005-04-17 16:05:31 -0500544
James.Smart@Emulex.Com91886522005-08-10 15:03:09 -0400545 int_to_scsilun(lpfc_cmd->pCmd->device->lun,
546 &lpfc_cmd->fcp_cmnd->fcp_lun);
dea31012005-04-17 16:05:31 -0500547
548 memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
549
550 if (scsi_cmnd->device->tagged_supported) {
551 switch (scsi_cmnd->tag) {
552 case HEAD_OF_QUEUE_TAG:
553 fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
554 break;
555 case ORDERED_QUEUE_TAG:
556 fcp_cmnd->fcpCntl1 = ORDERED_Q;
557 break;
558 default:
559 fcp_cmnd->fcpCntl1 = SIMPLE_Q;
560 break;
561 }
562 } else
563 fcp_cmnd->fcpCntl1 = 0;
564
565 /*
566 * There are three possibilities here - use scatter-gather segment, use
567 * the single mapping, or neither. Start the lpfc command prep by
568 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
569 * data bde entry.
570 */
571 if (scsi_cmnd->use_sg) {
572 if (datadir == DMA_TO_DEVICE) {
573 iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
574 iocb_cmd->un.fcpi.fcpi_parm = 0;
575 iocb_cmd->ulpPU = 0;
576 fcp_cmnd->fcpCntl3 = WRITE_DATA;
577 phba->fc4OutputRequests++;
578 } else {
579 iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
580 iocb_cmd->ulpPU = PARM_READ_CHECK;
581 iocb_cmd->un.fcpi.fcpi_parm =
582 scsi_cmnd->request_bufflen;
583 fcp_cmnd->fcpCntl3 = READ_DATA;
584 phba->fc4InputRequests++;
585 }
586 } else if (scsi_cmnd->request_buffer && scsi_cmnd->request_bufflen) {
587 if (datadir == DMA_TO_DEVICE) {
588 iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
589 iocb_cmd->un.fcpi.fcpi_parm = 0;
590 iocb_cmd->ulpPU = 0;
591 fcp_cmnd->fcpCntl3 = WRITE_DATA;
592 phba->fc4OutputRequests++;
593 } else {
594 iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
595 iocb_cmd->ulpPU = PARM_READ_CHECK;
596 iocb_cmd->un.fcpi.fcpi_parm =
597 scsi_cmnd->request_bufflen;
598 fcp_cmnd->fcpCntl3 = READ_DATA;
599 phba->fc4InputRequests++;
600 }
601 } else {
602 iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;
603 iocb_cmd->un.fcpi.fcpi_parm = 0;
604 iocb_cmd->ulpPU = 0;
605 fcp_cmnd->fcpCntl3 = 0;
606 phba->fc4ControlRequests++;
607 }
608
609 /*
610 * Finish initializing those IOCB fields that are independent
611 * of the scsi_cmnd request_buffer
612 */
613 piocbq->iocb.ulpContext = pnode->nlp_rpi;
614 if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
615 piocbq->iocb.ulpFCP2Rcvy = 1;
616
617 piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
618 piocbq->context1 = lpfc_cmd;
619 piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
620 piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
621}
622
623static int
624lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
625 struct lpfc_scsi_buf *lpfc_cmd,
626 uint8_t task_mgmt_cmd)
627{
628 struct lpfc_sli *psli;
629 struct lpfc_iocbq *piocbq;
630 IOCB_t *piocb;
631 struct fcp_cmnd *fcp_cmnd;
632 struct scsi_device *scsi_dev = lpfc_cmd->pCmd->device;
633 struct lpfc_rport_data *rdata = scsi_dev->hostdata;
634 struct lpfc_nodelist *ndlp = rdata->pnode;
635
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -0400636 if ((ndlp == NULL) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
dea31012005-04-17 16:05:31 -0500637 return 0;
638 }
639
640 psli = &phba->sli;
641 piocbq = &(lpfc_cmd->cur_iocbq);
642 piocb = &piocbq->iocb;
643
644 fcp_cmnd = lpfc_cmd->fcp_cmnd;
James.Smart@Emulex.Com91886522005-08-10 15:03:09 -0400645 int_to_scsilun(lpfc_cmd->pCmd->device->lun,
646 &lpfc_cmd->fcp_cmnd->fcp_lun);
dea31012005-04-17 16:05:31 -0500647 fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
648
649 piocb->ulpCommand = CMD_FCP_ICMND64_CR;
650
651 piocb->ulpContext = ndlp->nlp_rpi;
652 if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
653 piocb->ulpFCP2Rcvy = 1;
654 }
655 piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);
656
657 /* ulpTimeout is only one byte */
658 if (lpfc_cmd->timeout > 0xff) {
659 /*
660 * Do not timeout the command at the firmware level.
661 * The driver will provide the timeout mechanism.
662 */
663 piocb->ulpTimeout = 0;
664 } else {
665 piocb->ulpTimeout = lpfc_cmd->timeout;
666 }
667
668 lpfc_cmd->rdata = rdata;
669
670 switch (task_mgmt_cmd) {
671 case FCP_LUN_RESET:
672 /* Issue LUN Reset to TGT <num> LUN <num> */
673 lpfc_printf_log(phba,
674 KERN_INFO,
675 LOG_FCP,
676 "%d:0703 Issue LUN Reset to TGT %d LUN %d "
677 "Data: x%x x%x\n",
678 phba->brd_no,
679 scsi_dev->id, scsi_dev->lun,
680 ndlp->nlp_rpi, ndlp->nlp_flag);
681
682 break;
683 case FCP_ABORT_TASK_SET:
684 /* Issue Abort Task Set to TGT <num> LUN <num> */
685 lpfc_printf_log(phba,
686 KERN_INFO,
687 LOG_FCP,
688 "%d:0701 Issue Abort Task Set to TGT %d LUN %d "
689 "Data: x%x x%x\n",
690 phba->brd_no,
691 scsi_dev->id, scsi_dev->lun,
692 ndlp->nlp_rpi, ndlp->nlp_flag);
693
694 break;
695 case FCP_TARGET_RESET:
696 /* Issue Target Reset to TGT <num> */
697 lpfc_printf_log(phba,
698 KERN_INFO,
699 LOG_FCP,
700 "%d:0702 Issue Target Reset to TGT %d "
701 "Data: x%x x%x\n",
702 phba->brd_no,
703 scsi_dev->id, ndlp->nlp_rpi,
704 ndlp->nlp_flag);
705 break;
706 }
707
708 return (1);
709}
710
711static int
712lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
713{
714 struct lpfc_iocbq *iocbq;
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400715 struct lpfc_iocbq *iocbqrsp;
dea31012005-04-17 16:05:31 -0500716 int ret;
717
718 ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);
719 if (!ret)
720 return FAILED;
721
722 lpfc_cmd->scsi_hba = phba;
723 iocbq = &lpfc_cmd->cur_iocbq;
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400724 iocbqrsp = lpfc_sli_get_iocbq(phba);
725
dea31012005-04-17 16:05:31 -0500726 if (!iocbqrsp)
727 return FAILED;
dea31012005-04-17 16:05:31 -0500728
James.Smart@Emulex.Com68876922005-10-28 20:29:47 -0400729 ret = lpfc_sli_issue_iocb_wait(phba,
730 &phba->sli.ring[phba->sli.fcp_ring],
731 iocbq, iocbqrsp, lpfc_cmd->timeout);
dea31012005-04-17 16:05:31 -0500732 if (ret != IOCB_SUCCESS) {
733 lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
734 ret = FAILED;
735 } else {
736 ret = SUCCESS;
737 lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
738 lpfc_cmd->status = iocbqrsp->iocb.ulpStatus;
739 if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
740 (lpfc_cmd->result & IOERR_DRVR_MASK))
741 lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
742 }
743
James Bottomley604a3e32005-10-29 10:28:33 -0500744 lpfc_sli_release_iocbq(phba, iocbqrsp);
dea31012005-04-17 16:05:31 -0500745 return ret;
746}
747
dea31012005-04-17 16:05:31 -0500748const char *
749lpfc_info(struct Scsi_Host *host)
750{
Jamie Wellnitz7f0b5b12006-02-28 19:25:24 -0500751 struct lpfc_hba *phba = (struct lpfc_hba *) host->hostdata;
dea31012005-04-17 16:05:31 -0500752 int len;
753 static char lpfcinfobuf[384];
754
755 memset(lpfcinfobuf,0,384);
756 if (phba && phba->pcidev){
757 strncpy(lpfcinfobuf, phba->ModelDesc, 256);
758 len = strlen(lpfcinfobuf);
759 snprintf(lpfcinfobuf + len,
760 384-len,
761 " on PCI bus %02x device %02x irq %d",
762 phba->pcidev->bus->number,
763 phba->pcidev->devfn,
764 phba->pcidev->irq);
765 len = strlen(lpfcinfobuf);
766 if (phba->Port[0]) {
767 snprintf(lpfcinfobuf + len,
768 384-len,
769 " port %s",
770 phba->Port);
771 }
772 }
773 return lpfcinfobuf;
774}
775
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500776static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
777{
778 unsigned long poll_tmo_expires =
779 (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));
780
781 if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt)
782 mod_timer(&phba->fcp_poll_timer,
783 poll_tmo_expires);
784}
785
786void lpfc_poll_start_timer(struct lpfc_hba * phba)
787{
788 lpfc_poll_rearm_timer(phba);
789}
790
791void lpfc_poll_timeout(unsigned long ptr)
792{
793 struct lpfc_hba *phba = (struct lpfc_hba *)ptr;
794 unsigned long iflag;
795
796 spin_lock_irqsave(phba->host->host_lock, iflag);
797
798 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
799 lpfc_sli_poll_fcp_ring (phba);
800 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
801 lpfc_poll_rearm_timer(phba);
802 }
803
804 spin_unlock_irqrestore(phba->host->host_lock, iflag);
805}
806
dea31012005-04-17 16:05:31 -0500807static int
808lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
809{
810 struct lpfc_hba *phba =
Jamie Wellnitz7f0b5b12006-02-28 19:25:24 -0500811 (struct lpfc_hba *) cmnd->device->host->hostdata;
dea31012005-04-17 16:05:31 -0500812 struct lpfc_sli *psli = &phba->sli;
813 struct lpfc_rport_data *rdata = cmnd->device->hostdata;
814 struct lpfc_nodelist *ndlp = rdata->pnode;
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400815 struct lpfc_scsi_buf *lpfc_cmd;
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -0400816 struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -0400817 int err;
dea31012005-04-17 16:05:31 -0500818
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -0400819 err = fc_remote_port_chkready(rport);
820 if (err) {
821 cmnd->result = err;
dea31012005-04-17 16:05:31 -0500822 goto out_fail_command;
823 }
824
825 /*
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -0400826 * Catch race where our node has transitioned, but the
827 * transport is still transitioning.
dea31012005-04-17 16:05:31 -0500828 */
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -0400829 if (!ndlp) {
830 cmnd->result = ScsiResult(DID_BUS_BUSY, 0);
831 goto out_fail_command;
dea31012005-04-17 16:05:31 -0500832 }
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500833 lpfc_cmd = lpfc_get_scsi_buf (phba);
dea31012005-04-17 16:05:31 -0500834 if (lpfc_cmd == NULL) {
James.Smart@Emulex.Com1de933f2005-11-28 11:41:15 -0500835 lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
836 "%d:0707 driver's buffer pool is empty, "
837 "IO busied\n", phba->brd_no);
dea31012005-04-17 16:05:31 -0500838 goto out_host_busy;
839 }
840
841 /*
842 * Store the midlayer's command structure for the completion phase
843 * and complete the command initialization.
844 */
845 lpfc_cmd->pCmd = cmnd;
846 lpfc_cmd->rdata = rdata;
847 lpfc_cmd->timeout = 0;
848 cmnd->host_scribble = (unsigned char *)lpfc_cmd;
849 cmnd->scsi_done = done;
850
851 err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
852 if (err)
853 goto out_host_busy_free_buf;
854
855 lpfc_scsi_prep_cmnd(phba, lpfc_cmd, ndlp);
856
857 err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
858 &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
859 if (err)
860 goto out_host_busy_free_buf;
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500861
862 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
863 lpfc_sli_poll_fcp_ring(phba);
864 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
865 lpfc_poll_rearm_timer(phba);
866 }
867
dea31012005-04-17 16:05:31 -0500868 return 0;
869
870 out_host_busy_free_buf:
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400871 lpfc_release_scsi_buf(phba, lpfc_cmd);
dea31012005-04-17 16:05:31 -0500872 out_host_busy:
873 return SCSI_MLQUEUE_HOST_BUSY;
874
875 out_fail_command:
876 done(cmnd);
877 return 0;
878}
879
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500880
dea31012005-04-17 16:05:31 -0500881static int
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500882lpfc_abort_handler(struct scsi_cmnd *cmnd)
dea31012005-04-17 16:05:31 -0500883{
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500884 struct Scsi_Host *shost = cmnd->device->host;
Jamie Wellnitz7f0b5b12006-02-28 19:25:24 -0500885 struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
dea31012005-04-17 16:05:31 -0500886 struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400887 struct lpfc_iocbq *iocb;
888 struct lpfc_iocbq *abtsiocb;
dea31012005-04-17 16:05:31 -0500889 struct lpfc_scsi_buf *lpfc_cmd;
dea31012005-04-17 16:05:31 -0500890 IOCB_t *cmd, *icmd;
dea31012005-04-17 16:05:31 -0500891 unsigned int loop_count = 0;
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400892 int ret = SUCCESS;
893
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -0500894 lpfc_block_requests(phba);
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500895 spin_lock_irq(shost->host_lock);
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400896
897 lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
898 BUG_ON(!lpfc_cmd);
dea31012005-04-17 16:05:31 -0500899
900 /*
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400901 * If pCmd field of the corresponding lpfc_scsi_buf structure
902 * points to a different SCSI command, then the driver has
903 * already completed this command, but the midlayer did not
904 * see the completion before the eh fired. Just return
905 * SUCCESS.
dea31012005-04-17 16:05:31 -0500906 */
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400907 iocb = &lpfc_cmd->cur_iocbq;
908 if (lpfc_cmd->pCmd != cmnd)
909 goto out;
dea31012005-04-17 16:05:31 -0500910
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400911 BUG_ON(iocb->context1 != lpfc_cmd);
dea31012005-04-17 16:05:31 -0500912
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400913 abtsiocb = lpfc_sli_get_iocbq(phba);
914 if (abtsiocb == NULL) {
915 ret = FAILED;
dea31012005-04-17 16:05:31 -0500916 goto out;
917 }
918
dea31012005-04-17 16:05:31 -0500919 /*
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400920 * The scsi command can not be in txq and it is in flight because the
921 * pCmd is still pointig at the SCSI command we have to abort. There
922 * is no need to search the txcmplq. Just send an abort to the FW.
dea31012005-04-17 16:05:31 -0500923 */
dea31012005-04-17 16:05:31 -0500924
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400925 cmd = &iocb->iocb;
926 icmd = &abtsiocb->iocb;
927 icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
928 icmd->un.acxri.abortContextTag = cmd->ulpContext;
929 icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
dea31012005-04-17 16:05:31 -0500930
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400931 icmd->ulpLe = 1;
932 icmd->ulpClass = cmd->ulpClass;
933 if (phba->hba_state >= LPFC_LINK_UP)
934 icmd->ulpCommand = CMD_ABORT_XRI_CN;
935 else
936 icmd->ulpCommand = CMD_CLOSE_XRI_CN;
dea31012005-04-17 16:05:31 -0500937
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400938 abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
939 if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
940 lpfc_sli_release_iocbq(phba, abtsiocb);
941 ret = FAILED;
942 goto out;
943 }
944
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500945 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
946 lpfc_sli_poll_fcp_ring (phba);
947
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400948 /* Wait for abort to complete */
949 while (lpfc_cmd->pCmd == cmnd)
950 {
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -0500951 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
952 lpfc_sli_poll_fcp_ring (phba);
953
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400954 spin_unlock_irq(phba->host->host_lock);
Nishanth Aravamudana9a30472005-11-07 01:01:20 -0800955 schedule_timeout_uninterruptible(LPFC_ABORT_WAIT*HZ);
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400956 spin_lock_irq(phba->host->host_lock);
957 if (++loop_count
958 > (2 * phba->cfg_nodev_tmo)/LPFC_ABORT_WAIT)
dea31012005-04-17 16:05:31 -0500959 break;
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400960 }
dea31012005-04-17 16:05:31 -0500961
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400962 if (lpfc_cmd->pCmd == cmnd) {
963 ret = FAILED;
964 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
965 "%d:0748 abort handler timed out waiting for "
966 "abort to complete: ret %#x, ID %d, LUN %d, "
967 "snum %#lx\n",
968 phba->brd_no, ret, cmnd->device->id,
969 cmnd->device->lun, cmnd->serial_number);
dea31012005-04-17 16:05:31 -0500970 }
971
972 out:
973 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
James.Smart@Emulex.Com1de933f2005-11-28 11:41:15 -0500974 "%d:0749 SCSI Layer I/O Abort Request "
975 "Status x%x ID %d LUN %d snum %#lx\n",
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400976 phba->brd_no, ret, cmnd->device->id,
977 cmnd->device->lun, cmnd->serial_number);
dea31012005-04-17 16:05:31 -0500978
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500979 spin_unlock_irq(shost->host_lock);
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -0500980 lpfc_unblock_requests(phba);
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500981
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400982 return ret;
dea31012005-04-17 16:05:31 -0500983}
984
985static int
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500986lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
dea31012005-04-17 16:05:31 -0500987{
988 struct Scsi_Host *shost = cmnd->device->host;
Jamie Wellnitz7f0b5b12006-02-28 19:25:24 -0500989 struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -0400990 struct lpfc_scsi_buf *lpfc_cmd;
991 struct lpfc_iocbq *iocbq, *iocbqrsp;
dea31012005-04-17 16:05:31 -0500992 struct lpfc_rport_data *rdata = cmnd->device->hostdata;
993 struct lpfc_nodelist *pnode = rdata->pnode;
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -0500994 uint32_t cmd_result = 0, cmd_status = 0;
dea31012005-04-17 16:05:31 -0500995 int ret = FAILED;
996 int cnt, loopcnt;
997
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -0500998 lpfc_block_requests(phba);
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -0500999 spin_lock_irq(shost->host_lock);
dea31012005-04-17 16:05:31 -05001000 /*
1001 * If target is not in a MAPPED state, delay the reset until
1002 * target is rediscovered or nodev timeout expires.
1003 */
1004 while ( 1 ) {
1005 if (!pnode)
1006 break;
1007
1008 if (pnode->nlp_state != NLP_STE_MAPPED_NODE) {
1009 spin_unlock_irq(phba->host->host_lock);
Nishanth Aravamudana9a30472005-11-07 01:01:20 -08001010 schedule_timeout_uninterruptible(msecs_to_jiffies(500));
dea31012005-04-17 16:05:31 -05001011 spin_lock_irq(phba->host->host_lock);
1012 }
1013 if ((pnode) && (pnode->nlp_state == NLP_STE_MAPPED_NODE))
1014 break;
1015 }
1016
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -05001017 lpfc_cmd = lpfc_get_scsi_buf (phba);
dea31012005-04-17 16:05:31 -05001018 if (lpfc_cmd == NULL)
1019 goto out;
1020
1021 lpfc_cmd->pCmd = cmnd;
1022 lpfc_cmd->timeout = 60;
1023 lpfc_cmd->scsi_hba = phba;
1024
1025 ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET);
1026 if (!ret)
1027 goto out_free_scsi_buf;
1028
1029 iocbq = &lpfc_cmd->cur_iocbq;
1030
1031 /* get a buffer for this IOCB command response */
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -04001032 iocbqrsp = lpfc_sli_get_iocbq(phba);
dea31012005-04-17 16:05:31 -05001033 if (iocbqrsp == NULL)
1034 goto out_free_scsi_buf;
1035
James.Smart@Emulex.Com68876922005-10-28 20:29:47 -04001036 ret = lpfc_sli_issue_iocb_wait(phba,
1037 &phba->sli.ring[phba->sli.fcp_ring],
1038 iocbq, iocbqrsp, lpfc_cmd->timeout);
dea31012005-04-17 16:05:31 -05001039 if (ret == IOCB_SUCCESS)
1040 ret = SUCCESS;
1041
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001042
1043 cmd_result = iocbqrsp->iocb.un.ulpWord[4];
1044 cmd_status = iocbqrsp->iocb.ulpStatus;
1045
1046 lpfc_sli_release_iocbq(phba, iocbqrsp);
1047 lpfc_release_scsi_buf(phba, lpfc_cmd);
dea31012005-04-17 16:05:31 -05001048
1049 /*
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001050 * All outstanding txcmplq I/Os should have been aborted by the device.
dea31012005-04-17 16:05:31 -05001051 * Unfortunately, some targets do not abide by this forcing the driver
1052 * to double check.
1053 */
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001054 cnt = lpfc_sli_sum_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
1055 cmnd->device->id, cmnd->device->lun,
1056 LPFC_CTX_LUN);
1057 if (cnt)
1058 lpfc_sli_abort_iocb(phba,
1059 &phba->sli.ring[phba->sli.fcp_ring],
1060 cmnd->device->id, cmnd->device->lun,
1061 0, LPFC_CTX_LUN);
dea31012005-04-17 16:05:31 -05001062 loopcnt = 0;
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001063 while(cnt) {
dea31012005-04-17 16:05:31 -05001064 spin_unlock_irq(phba->host->host_lock);
Nishanth Aravamudana9a30472005-11-07 01:01:20 -08001065 schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
dea31012005-04-17 16:05:31 -05001066 spin_lock_irq(phba->host->host_lock);
1067
1068 if (++loopcnt
1069 > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT)
1070 break;
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001071
1072 cnt = lpfc_sli_sum_iocb(phba,
1073 &phba->sli.ring[phba->sli.fcp_ring],
1074 cmnd->device->id, cmnd->device->lun,
1075 LPFC_CTX_LUN);
dea31012005-04-17 16:05:31 -05001076 }
1077
1078 if (cnt) {
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -04001079 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
dea31012005-04-17 16:05:31 -05001080 "%d:0719 LUN Reset I/O flush failure: cnt x%x\n",
1081 phba->brd_no, cnt);
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -04001082 ret = FAILED;
dea31012005-04-17 16:05:31 -05001083 }
1084
dea31012005-04-17 16:05:31 -05001085out_free_scsi_buf:
1086 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
1087 "%d:0713 SCSI layer issued LUN reset (%d, %d) "
1088 "Data: x%x x%x x%x\n",
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001089 phba->brd_no, cmnd->device->id,cmnd->device->lun,
1090 ret, cmd_status, cmd_result);
1091
dea31012005-04-17 16:05:31 -05001092out:
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -05001093 spin_unlock_irq(shost->host_lock);
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001094 lpfc_unblock_requests(phba);
dea31012005-04-17 16:05:31 -05001095 return ret;
1096}
1097
Jeff Garzik 94d0e7b82005-05-28 07:55:48 -04001098static int
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -05001099lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
dea31012005-04-17 16:05:31 -05001100{
1101 struct Scsi_Host *shost = cmnd->device->host;
Jamie Wellnitz7f0b5b12006-02-28 19:25:24 -05001102 struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
dea31012005-04-17 16:05:31 -05001103 struct lpfc_nodelist *ndlp = NULL;
1104 int match;
1105 int ret = FAILED, i, err_count = 0;
1106 int cnt, loopcnt;
1107 unsigned int midlayer_id = 0;
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -04001108 struct lpfc_scsi_buf * lpfc_cmd;
dea31012005-04-17 16:05:31 -05001109
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001110 lpfc_block_requests(phba);
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -05001111 spin_lock_irq(shost->host_lock);
1112
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -05001113 lpfc_cmd = lpfc_get_scsi_buf(phba);
dea31012005-04-17 16:05:31 -05001114 if (lpfc_cmd == NULL)
1115 goto out;
1116
1117 /* The lpfc_cmd storage is reused. Set all loop invariants. */
1118 lpfc_cmd->timeout = 60;
1119 lpfc_cmd->pCmd = cmnd;
1120 lpfc_cmd->scsi_hba = phba;
1121
1122 /*
1123 * Since the driver manages a single bus device, reset all
1124 * targets known to the driver. Should any target reset
1125 * fail, this routine returns failure to the midlayer.
1126 */
1127 midlayer_id = cmnd->device->id;
1128 for (i = 0; i < MAX_FCP_TARGET; i++) {
1129 /* Search the mapped list for this target ID */
1130 match = 0;
1131 list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) {
1132 if ((i == ndlp->nlp_sid) && ndlp->rport) {
1133 match = 1;
1134 break;
1135 }
1136 }
1137 if (!match)
1138 continue;
1139
1140 lpfc_cmd->pCmd->device->id = i;
1141 lpfc_cmd->pCmd->device->hostdata = ndlp->rport->dd_data;
1142 ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba);
1143 if (ret != SUCCESS) {
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001144 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
dea31012005-04-17 16:05:31 -05001145 "%d:0713 Bus Reset on target %d failed\n",
1146 phba->brd_no, i);
1147 err_count++;
1148 }
1149 }
1150
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001151 if (err_count == 0)
1152 ret = SUCCESS;
1153
1154 lpfc_release_scsi_buf(phba, lpfc_cmd);
1155
1156 /*
1157 * All outstanding txcmplq I/Os should have been aborted by
1158 * the targets. Unfortunately, some targets do not abide by
1159 * this forcing the driver to double check.
1160 */
dea31012005-04-17 16:05:31 -05001161 cmnd->device->id = midlayer_id;
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001162 cnt = lpfc_sli_sum_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
1163 0, 0, LPFC_CTX_HOST);
1164 if (cnt)
1165 lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
1166 0, 0, 0, LPFC_CTX_HOST);
dea31012005-04-17 16:05:31 -05001167 loopcnt = 0;
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001168 while(cnt) {
dea31012005-04-17 16:05:31 -05001169 spin_unlock_irq(phba->host->host_lock);
Nishanth Aravamudana9a30472005-11-07 01:01:20 -08001170 schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
dea31012005-04-17 16:05:31 -05001171 spin_lock_irq(phba->host->host_lock);
1172
1173 if (++loopcnt
1174 > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT)
1175 break;
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001176
1177 cnt = lpfc_sli_sum_iocb(phba,
1178 &phba->sli.ring[phba->sli.fcp_ring],
1179 0, 0, LPFC_CTX_HOST);
dea31012005-04-17 16:05:31 -05001180 }
1181
1182 if (cnt) {
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001183 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
dea31012005-04-17 16:05:31 -05001184 "%d:0715 Bus Reset I/O flush failure: cnt x%x left x%x\n",
1185 phba->brd_no, cnt, i);
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001186 ret = FAILED;
dea31012005-04-17 16:05:31 -05001187 }
1188
dea31012005-04-17 16:05:31 -05001189 lpfc_printf_log(phba,
1190 KERN_ERR,
1191 LOG_FCP,
1192 "%d:0714 SCSI layer issued Bus Reset Data: x%x\n",
1193 phba->brd_no, ret);
1194out:
James.Smart@Emulex.Com63c59c32005-11-28 11:41:53 -05001195 spin_unlock_irq(shost->host_lock);
James.Smart@Emulex.Com6175c022005-11-28 11:42:05 -05001196 lpfc_unblock_requests(phba);
dea31012005-04-17 16:05:31 -05001197 return ret;
1198}
1199
1200static int
dea31012005-04-17 16:05:31 -05001201lpfc_slave_alloc(struct scsi_device *sdev)
1202{
Jamie Wellnitz7f0b5b12006-02-28 19:25:24 -05001203 struct lpfc_hba *phba = (struct lpfc_hba *)sdev->host->hostdata;
dea31012005-04-17 16:05:31 -05001204 struct lpfc_scsi_buf *scsi_buf = NULL;
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -04001205 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
dea31012005-04-17 16:05:31 -05001206 uint32_t total = 0, i;
1207 uint32_t num_to_alloc = 0;
1208 unsigned long flags;
dea31012005-04-17 16:05:31 -05001209
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -04001210 if (!rport || fc_remote_port_chkready(rport))
dea31012005-04-17 16:05:31 -05001211 return -ENXIO;
1212
James.Smart@Emulex.Com19a7b4a2005-10-18 12:03:35 -04001213 sdev->hostdata = rport->dd_data;
dea31012005-04-17 16:05:31 -05001214
1215 /*
1216 * Populate the cmds_per_lun count scsi_bufs into this host's globally
1217 * available list of scsi buffers. Don't allocate more than the
James.Smart@Emulex.Coma784efb2005-10-28 20:29:51 -04001218 * HBA limit conveyed to the midlayer via the host structure. The
1219 * formula accounts for the lun_queue_depth + error handlers + 1
1220 * extra. This list of scsi bufs exists for the lifetime of the driver.
dea31012005-04-17 16:05:31 -05001221 */
1222 total = phba->total_scsi_bufs;
James.Smart@Emulex.Coma784efb2005-10-28 20:29:51 -04001223 num_to_alloc = phba->cfg_lun_queue_depth + 2;
dea31012005-04-17 16:05:31 -05001224 if (total >= phba->cfg_hba_queue_depth) {
James.Smart@Emulex.Coma784efb2005-10-28 20:29:51 -04001225 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
1226 "%d:0704 At limitation of %d preallocated "
1227 "command buffers\n", phba->brd_no, total);
dea31012005-04-17 16:05:31 -05001228 return 0;
1229 } else if (total + num_to_alloc > phba->cfg_hba_queue_depth) {
James.Smart@Emulex.Coma784efb2005-10-28 20:29:51 -04001230 lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
1231 "%d:0705 Allocation request of %d command "
1232 "buffers will exceed max of %d. Reducing "
1233 "allocation request to %d.\n", phba->brd_no,
1234 num_to_alloc, phba->cfg_hba_queue_depth,
1235 (phba->cfg_hba_queue_depth - total));
dea31012005-04-17 16:05:31 -05001236 num_to_alloc = phba->cfg_hba_queue_depth - total;
1237 }
1238
1239 for (i = 0; i < num_to_alloc; i++) {
James.Smart@Emulex.Com0bd4ca22005-10-28 20:30:02 -04001240 scsi_buf = lpfc_new_scsi_buf(phba);
dea31012005-04-17 16:05:31 -05001241 if (!scsi_buf) {
James.Smart@Emulex.Coma784efb2005-10-28 20:29:51 -04001242 lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
1243 "%d:0706 Failed to allocate command "
1244 "buffer\n", phba->brd_no);
dea31012005-04-17 16:05:31 -05001245 break;
1246 }
1247
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -05001248 spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
dea31012005-04-17 16:05:31 -05001249 phba->total_scsi_bufs++;
1250 list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -05001251 spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
dea31012005-04-17 16:05:31 -05001252 }
1253 return 0;
1254}
1255
1256static int
1257lpfc_slave_configure(struct scsi_device *sdev)
1258{
Jamie Wellnitz7f0b5b12006-02-28 19:25:24 -05001259 struct lpfc_hba *phba = (struct lpfc_hba *) sdev->host->hostdata;
dea31012005-04-17 16:05:31 -05001260 struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1261
1262 if (sdev->tagged_supported)
1263 scsi_activate_tcq(sdev, phba->cfg_lun_queue_depth);
1264 else
1265 scsi_deactivate_tcq(sdev, phba->cfg_lun_queue_depth);
1266
1267 /*
1268 * Initialize the fc transport attributes for the target
1269 * containing this scsi device. Also note that the driver's
1270 * target pointer is stored in the starget_data for the
1271 * driver's sysfs entry point functions.
1272 */
1273 rport->dev_loss_tmo = phba->cfg_nodev_tmo + 5;
1274
James.Smart@Emulex.Com875fbdf2005-11-29 16:32:13 -05001275 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
1276 lpfc_sli_poll_fcp_ring(phba);
1277 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
1278 lpfc_poll_rearm_timer(phba);
1279 }
1280
dea31012005-04-17 16:05:31 -05001281 return 0;
1282}
1283
1284static void
1285lpfc_slave_destroy(struct scsi_device *sdev)
1286{
1287 sdev->hostdata = NULL;
1288 return;
1289}
1290
1291struct scsi_host_template lpfc_template = {
1292 .module = THIS_MODULE,
1293 .name = LPFC_DRIVER_NAME,
1294 .info = lpfc_info,
1295 .queuecommand = lpfc_queuecommand,
1296 .eh_abort_handler = lpfc_abort_handler,
1297 .eh_device_reset_handler= lpfc_reset_lun_handler,
1298 .eh_bus_reset_handler = lpfc_reset_bus_handler,
1299 .slave_alloc = lpfc_slave_alloc,
1300 .slave_configure = lpfc_slave_configure,
1301 .slave_destroy = lpfc_slave_destroy,
1302 .this_id = -1,
1303 .sg_tablesize = LPFC_SG_SEG_CNT,
1304 .cmd_per_lun = LPFC_CMD_PER_LUN,
1305 .use_clustering = ENABLE_CLUSTERING,
1306 .shost_attrs = lpfc_host_attrs,
James.Smart@Emulex.Com564b2962005-06-25 10:34:17 -04001307 .max_sectors = 0xFFFF,
dea31012005-04-17 16:05:31 -05001308};