blob: b18486ad8e17fc11fbea0d9c9e657602c10a13da [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * HP300 Topcat framebuffer support (derived from macfb of all things)
3 * Phil Blundell <philb@gnu.org> 1998
4 * DIO-II, colour map and Catseye support by
5 * Kars de Jong <jongk@linux-m68k.org>, May 2004.
6 */
7
8#include <linux/module.h>
9#include <linux/kernel.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070010#include <linux/errno.h>
11#include <linux/string.h>
12#include <linux/mm.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070013#include <linux/slab.h>
14#include <linux/delay.h>
15#include <linux/init.h>
16#include <linux/fb.h>
17#include <linux/dio.h>
18
19#include <asm/io.h>
20#include <asm/uaccess.h>
21
22static struct fb_info fb_info = {
23 .fix = {
24 .id = "HP300 ",
25 .type = FB_TYPE_PACKED_PIXELS,
26 .visual = FB_VISUAL_PSEUDOCOLOR,
27 .accel = FB_ACCEL_NONE,
28 }
29};
30
31static unsigned long fb_regs;
32static unsigned char fb_bitmask;
33
34#define TC_NBLANK 0x4080
35#define TC_WEN 0x4088
36#define TC_REN 0x408c
37#define TC_FBEN 0x4090
38#define TC_PRR 0x40ea
39
40/* These defines match the X window system */
41#define RR_CLEAR 0x0
42#define RR_COPY 0x3
43#define RR_NOOP 0x5
44#define RR_XOR 0x6
45#define RR_INVERT 0xa
46#define RR_COPYINVERTED 0xc
47#define RR_SET 0xf
48
49/* blitter regs */
50#define BUSY 0x4044
51#define WMRR 0x40ef
52#define SOURCE_X 0x40f2
53#define SOURCE_Y 0x40f6
54#define DEST_X 0x40fa
55#define DEST_Y 0x40fe
56#define WHEIGHT 0x4106
57#define WWIDTH 0x4102
58#define WMOVE 0x409c
59
60static struct fb_var_screeninfo hpfb_defined = {
61 .red = {
62 .length = 8,
63 },
64 .green = {
65 .length = 8,
66 },
67 .blue = {
68 .length = 8,
69 },
70 .activate = FB_ACTIVATE_NOW,
71 .height = -1,
72 .width = -1,
73 .vmode = FB_VMODE_NONINTERLACED,
74};
75
76static int hpfb_setcolreg(unsigned regno, unsigned red, unsigned green,
77 unsigned blue, unsigned transp,
78 struct fb_info *info)
79{
80 /* use MSBs */
81 unsigned char _red =red>>8;
82 unsigned char _green=green>>8;
83 unsigned char _blue =blue>>8;
84 unsigned char _regno=regno;
85
86 /*
87 * Set a single color register. The values supplied are
88 * already rounded down to the hardware's capabilities
89 * (according to the entries in the `var' structure). Return
90 * != 0 for invalid regno.
91 */
92
93 if (regno >= info->cmap.len)
94 return 1;
95
96 while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1);
97
98 out_be16(fb_regs + 0x60ba, 0xff);
99
100 out_be16(fb_regs + 0x60b2, _red);
101 out_be16(fb_regs + 0x60b4, _green);
102 out_be16(fb_regs + 0x60b6, _blue);
103 out_be16(fb_regs + 0x60b8, ~_regno);
104 out_be16(fb_regs + 0x60f0, 0xff);
105
106 udelay(100);
107
108 while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1);
109 out_be16(fb_regs + 0x60b2, 0);
110 out_be16(fb_regs + 0x60b4, 0);
111 out_be16(fb_regs + 0x60b6, 0);
112 out_be16(fb_regs + 0x60b8, 0);
113
114 return 0;
115}
116
117/* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
118
119static int hpfb_blank(int blank, struct fb_info *info)
120{
121 out_8(fb_regs + TC_NBLANK, (blank ? 0x00 : fb_bitmask));
122
123 return 0;
124}
125
126static void topcat_blit(int x0, int y0, int x1, int y1, int w, int h, int rr)
127{
128 if (rr >= 0) {
129 while (in_8(fb_regs + BUSY) & fb_bitmask)
130 ;
131 }
132 out_8(fb_regs + TC_FBEN, fb_bitmask);
133 if (rr >= 0) {
134 out_8(fb_regs + TC_WEN, fb_bitmask);
135 out_8(fb_regs + WMRR, rr);
136 }
137 out_be16(fb_regs + SOURCE_X, x0);
138 out_be16(fb_regs + SOURCE_Y, y0);
139 out_be16(fb_regs + DEST_X, x1);
140 out_be16(fb_regs + DEST_Y, y1);
141 out_be16(fb_regs + WWIDTH, w);
142 out_be16(fb_regs + WHEIGHT, h);
143 out_8(fb_regs + WMOVE, fb_bitmask);
144}
145
146static void hpfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
147{
148 topcat_blit(area->sx, area->sy, area->dx, area->dy, area->width, area->height, RR_COPY);
149}
150
151static void hpfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
152{
153 u8 clr;
154
155 clr = region->color & 0xff;
156
157 while (in_8(fb_regs + BUSY) & fb_bitmask)
158 ;
159
160 /* Foreground */
161 out_8(fb_regs + TC_WEN, fb_bitmask & clr);
162 out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_SET : RR_INVERT));
163
164 /* Background */
165 out_8(fb_regs + TC_WEN, fb_bitmask & ~clr);
166 out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_CLEAR : RR_NOOP));
167
168 topcat_blit(region->dx, region->dy, region->dx, region->dy, region->width, region->height, -1);
169}
170
171static int hpfb_sync(struct fb_info *info)
172{
173 /*
174 * Since we also access the framebuffer directly, we have to wait
175 * until the block mover is finished
176 */
177 while (in_8(fb_regs + BUSY) & fb_bitmask)
178 ;
179
180 out_8(fb_regs + TC_WEN, fb_bitmask);
181 out_8(fb_regs + TC_PRR, RR_COPY);
182 out_8(fb_regs + TC_FBEN, fb_bitmask);
183
184 return 0;
185}
186
187static struct fb_ops hpfb_ops = {
188 .owner = THIS_MODULE,
189 .fb_setcolreg = hpfb_setcolreg,
190 .fb_blank = hpfb_blank,
191 .fb_fillrect = hpfb_fillrect,
192 .fb_copyarea = hpfb_copyarea,
193 .fb_imageblit = cfb_imageblit,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700194 .fb_sync = hpfb_sync,
195};
196
197/* Common to all HP framebuffers */
198#define HPFB_FBWMSB 0x05 /* Frame buffer width */
199#define HPFB_FBWLSB 0x07
200#define HPFB_FBHMSB 0x09 /* Frame buffer height */
201#define HPFB_FBHLSB 0x0b
202#define HPFB_DWMSB 0x0d /* Display width */
203#define HPFB_DWLSB 0x0f
204#define HPFB_DHMSB 0x11 /* Display height */
205#define HPFB_DHLSB 0x13
206#define HPFB_NUMPLANES 0x5b /* Number of colour planes */
207#define HPFB_FBOMSB 0x5d /* Frame buffer offset */
208#define HPFB_FBOLSB 0x5f
209
210static int __init hpfb_init_one(unsigned long phys_base, unsigned long virt_base)
211{
212 unsigned long fboff, fb_width, fb_height, fb_start;
213
214 fb_regs = virt_base;
215 fboff = (in_8(fb_regs + HPFB_FBOMSB) << 8) | in_8(fb_regs + HPFB_FBOLSB);
216
217 fb_info.fix.smem_start = (in_8(fb_regs + fboff) << 16);
218
219 if (phys_base >= DIOII_BASE) {
220 fb_info.fix.smem_start += phys_base;
221 }
222
223 if (DIO_SECID(fb_regs) != DIO_ID2_TOPCAT) {
224 /* This is the magic incantation the HP X server uses to make Catseye boards work. */
225 while (in_be16(fb_regs+0x4800) & 1)
226 ;
227 out_be16(fb_regs+0x4800, 0); /* Catseye status */
228 out_be16(fb_regs+0x4510, 0); /* VB */
229 out_be16(fb_regs+0x4512, 0); /* TCNTRL */
230 out_be16(fb_regs+0x4514, 0); /* ACNTRL */
231 out_be16(fb_regs+0x4516, 0); /* PNCNTRL */
232 out_be16(fb_regs+0x4206, 0x90); /* RUG Command/Status */
233 out_be16(fb_regs+0x60a2, 0); /* Overlay Mask */
234 out_be16(fb_regs+0x60bc, 0); /* Ram Select */
235 }
236
237 /*
238 * Fill in the available video resolution
239 */
240 fb_width = (in_8(fb_regs + HPFB_FBWMSB) << 8) | in_8(fb_regs + HPFB_FBWLSB);
241 fb_info.fix.line_length = fb_width;
242 fb_height = (in_8(fb_regs + HPFB_FBHMSB) << 8) | in_8(fb_regs + HPFB_FBHLSB);
243 fb_info.fix.smem_len = fb_width * fb_height;
244 fb_start = (unsigned long)ioremap_writethrough(fb_info.fix.smem_start,
245 fb_info.fix.smem_len);
246 hpfb_defined.xres = (in_8(fb_regs + HPFB_DWMSB) << 8) | in_8(fb_regs + HPFB_DWLSB);
247 hpfb_defined.yres = (in_8(fb_regs + HPFB_DHMSB) << 8) | in_8(fb_regs + HPFB_DHLSB);
248 hpfb_defined.xres_virtual = hpfb_defined.xres;
249 hpfb_defined.yres_virtual = hpfb_defined.yres;
250 hpfb_defined.bits_per_pixel = in_8(fb_regs + HPFB_NUMPLANES);
251
252 printk(KERN_INFO "hpfb: framebuffer at 0x%lx, mapped to 0x%lx, size %dk\n",
253 fb_info.fix.smem_start, fb_start, fb_info.fix.smem_len/1024);
254 printk(KERN_INFO "hpfb: mode is %dx%dx%d, linelength=%d\n",
255 hpfb_defined.xres, hpfb_defined.yres, hpfb_defined.bits_per_pixel, fb_info.fix.line_length);
256
257 /*
258 * Give the hardware a bit of a prod and work out how many bits per
259 * pixel are supported.
260 */
261 out_8(fb_regs + TC_WEN, 0xff);
262 out_8(fb_regs + TC_PRR, RR_COPY);
263 out_8(fb_regs + TC_FBEN, 0xff);
264 out_8(fb_start, 0xff);
265 fb_bitmask = in_8(fb_start);
266 out_8(fb_start, 0);
267
268 /*
269 * Enable reading/writing of all the planes.
270 */
271 out_8(fb_regs + TC_WEN, fb_bitmask);
272 out_8(fb_regs + TC_PRR, RR_COPY);
273 out_8(fb_regs + TC_REN, fb_bitmask);
274 out_8(fb_regs + TC_FBEN, fb_bitmask);
275
276 /*
277 * Clear the screen.
278 */
279 topcat_blit(0, 0, 0, 0, fb_width, fb_height, RR_CLEAR);
280
281 /*
282 * Let there be consoles..
283 */
284 if (DIO_SECID(fb_regs) == DIO_ID2_TOPCAT)
285 strcat(fb_info.fix.id, "Topcat");
286 else
287 strcat(fb_info.fix.id, "Catseye");
288 fb_info.fbops = &hpfb_ops;
289 fb_info.flags = FBINFO_DEFAULT;
290 fb_info.var = hpfb_defined;
291 fb_info.screen_base = (char *)fb_start;
292
293 fb_alloc_cmap(&fb_info.cmap, 1 << hpfb_defined.bits_per_pixel, 0);
294
295 if (register_framebuffer(&fb_info) < 0) {
296 fb_dealloc_cmap(&fb_info.cmap);
Amol Lad1bedb0b2006-12-08 02:40:10 -0800297 iounmap(fb_info.screen_base);
298 fb_info.screen_base = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299 return 1;
300 }
301
302 printk(KERN_INFO "fb%d: %s frame buffer device\n",
303 fb_info.node, fb_info.fix.id);
304
305 return 0;
306}
307
308/*
309 * Check that the secondary ID indicates that we have some hope of working with this
310 * framebuffer. The catseye boards are pretty much like topcats and we can muddle through.
311 */
312
313#define topcat_sid_ok(x) (((x) == DIO_ID2_LRCATSEYE) || ((x) == DIO_ID2_HRCCATSEYE) \
314 || ((x) == DIO_ID2_HRMCATSEYE) || ((x) == DIO_ID2_TOPCAT))
315
316/*
317 * Initialise the framebuffer
318 */
319static int __devinit hpfb_dio_probe(struct dio_dev * d, const struct dio_device_id * ent)
320{
321 unsigned long paddr, vaddr;
322
323 paddr = d->resource.start;
324 if (!request_mem_region(d->resource.start, d->resource.end - d->resource.start, d->name))
325 return -EBUSY;
326
327 if (d->scode >= DIOII_SCBASE) {
328 vaddr = (unsigned long)ioremap(paddr, d->resource.end - d->resource.start);
329 } else {
330 vaddr = paddr + DIO_VIRADDRBASE;
331 }
332 printk(KERN_INFO "Topcat found at DIO select code %d "
333 "(secondary id %02x)\n", d->scode, (d->id >> 8) & 0xff);
334 if (hpfb_init_one(paddr, vaddr)) {
335 if (d->scode >= DIOII_SCBASE)
336 iounmap((void *)vaddr);
337 return -ENOMEM;
338 }
339 return 0;
340}
341
342static void __devexit hpfb_remove_one(struct dio_dev *d)
343{
344 unregister_framebuffer(&fb_info);
345 if (d->scode >= DIOII_SCBASE)
346 iounmap((void *)fb_regs);
347 release_mem_region(d->resource.start, d->resource.end - d->resource.start);
348}
349
350static struct dio_device_id hpfb_dio_tbl[] = {
351 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_LRCATSEYE) },
352 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRCCATSEYE) },
353 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRMCATSEYE) },
354 { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_TOPCAT) },
355 { 0 }
356};
357
358static struct dio_driver hpfb_driver = {
359 .name = "hpfb",
360 .id_table = hpfb_dio_tbl,
361 .probe = hpfb_dio_probe,
362 .remove = __devexit_p(hpfb_remove_one),
363};
364
365int __init hpfb_init(void)
366{
367 unsigned int sid;
368 mm_segment_t fs;
369 unsigned char i;
370 int err;
371
372 /* Topcats can be on the internal IO bus or real DIO devices.
373 * The internal variant sits at 0x560000; it has primary
374 * and secondary ID registers just like the DIO version.
375 * So we merge the two detection routines.
376 *
377 * Perhaps this #define should be in a global header file:
378 * I believe it's common to all internal fbs, not just topcat.
379 */
380#define INTFBVADDR 0xf0560000
381#define INTFBPADDR 0x560000
382
383 if (!MACH_IS_HP300)
384 return -ENXIO;
385
386 if (fb_get_options("hpfb", NULL))
387 return -ENODEV;
388
Bjorn Helgaase51c01b2006-03-25 03:07:17 -0800389 err = dio_register_driver(&hpfb_driver);
390 if (err)
391 return err;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700392
393 fs = get_fs();
394 set_fs(KERNEL_DS);
395 err = get_user(i, (unsigned char *)INTFBVADDR + DIO_IDOFF);
396 set_fs(fs);
397
398 if (!err && (i == DIO_ID_FBUFFER) && topcat_sid_ok(sid = DIO_SECID(INTFBVADDR))) {
399 if (!request_mem_region(INTFBPADDR, DIO_DEVSIZE, "Internal Topcat"))
400 return -EBUSY;
401 printk(KERN_INFO "Internal Topcat found (secondary id %02x)\n", sid);
402 if (hpfb_init_one(INTFBPADDR, INTFBVADDR)) {
403 return -ENOMEM;
404 }
405 }
406 return 0;
407}
408
409void __exit hpfb_cleanup_module(void)
410{
411 dio_unregister_driver(&hpfb_driver);
412}
413
414module_init(hpfb_init);
415module_exit(hpfb_cleanup_module);
416
417MODULE_LICENSE("GPL");