Heiko Stübner | 3f0292a | 2011-10-05 12:27:05 +0200 | [diff] [blame] | 1 | /* |
| 2 | * gpio-regulator.c |
| 3 | * |
| 4 | * Copyright 2011 Heiko Stuebner <heiko@sntech.de> |
| 5 | * |
| 6 | * based on fixed.c |
| 7 | * |
| 8 | * Copyright 2008 Wolfson Microelectronics PLC. |
| 9 | * |
| 10 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| 11 | * |
| 12 | * Copyright (c) 2009 Nokia Corporation |
| 13 | * Roger Quadros <ext-roger.quadros@nokia.com> |
| 14 | * |
| 15 | * This program is free software; you can redistribute it and/or |
| 16 | * modify it under the terms of the GNU General Public License as |
| 17 | * published by the Free Software Foundation; either version 2 of the |
| 18 | * License, or (at your option) any later version. |
| 19 | * |
| 20 | * This is useful for systems with mixed controllable and |
| 21 | * non-controllable regulators, as well as for allowing testing on |
| 22 | * systems with no controllable regulators. |
| 23 | */ |
| 24 | |
| 25 | #include <linux/err.h> |
| 26 | #include <linux/mutex.h> |
Mark Brown | ecc37ed | 2011-10-11 13:59:13 +0100 | [diff] [blame] | 27 | #include <linux/module.h> |
Heiko Stübner | 3f0292a | 2011-10-05 12:27:05 +0200 | [diff] [blame] | 28 | #include <linux/platform_device.h> |
| 29 | #include <linux/regulator/driver.h> |
| 30 | #include <linux/regulator/machine.h> |
| 31 | #include <linux/regulator/gpio-regulator.h> |
| 32 | #include <linux/gpio.h> |
| 33 | #include <linux/delay.h> |
| 34 | #include <linux/slab.h> |
| 35 | |
| 36 | struct gpio_regulator_data { |
| 37 | struct regulator_desc desc; |
| 38 | struct regulator_dev *dev; |
| 39 | |
| 40 | int enable_gpio; |
| 41 | bool enable_high; |
| 42 | bool is_enabled; |
| 43 | unsigned startup_delay; |
| 44 | |
| 45 | struct gpio *gpios; |
| 46 | int nr_gpios; |
| 47 | |
| 48 | struct gpio_regulator_state *states; |
| 49 | int nr_states; |
| 50 | |
| 51 | int state; |
| 52 | }; |
| 53 | |
| 54 | static int gpio_regulator_is_enabled(struct regulator_dev *dev) |
| 55 | { |
| 56 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 57 | |
| 58 | return data->is_enabled; |
| 59 | } |
| 60 | |
| 61 | static int gpio_regulator_enable(struct regulator_dev *dev) |
| 62 | { |
| 63 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 64 | |
| 65 | if (gpio_is_valid(data->enable_gpio)) { |
| 66 | gpio_set_value_cansleep(data->enable_gpio, data->enable_high); |
| 67 | data->is_enabled = true; |
| 68 | } |
| 69 | |
| 70 | return 0; |
| 71 | } |
| 72 | |
| 73 | static int gpio_regulator_disable(struct regulator_dev *dev) |
| 74 | { |
| 75 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 76 | |
| 77 | if (gpio_is_valid(data->enable_gpio)) { |
| 78 | gpio_set_value_cansleep(data->enable_gpio, !data->enable_high); |
| 79 | data->is_enabled = false; |
| 80 | } |
| 81 | |
| 82 | return 0; |
| 83 | } |
| 84 | |
| 85 | static int gpio_regulator_enable_time(struct regulator_dev *dev) |
| 86 | { |
| 87 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 88 | |
| 89 | return data->startup_delay; |
| 90 | } |
| 91 | |
| 92 | static int gpio_regulator_get_value(struct regulator_dev *dev) |
| 93 | { |
| 94 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 95 | int ptr; |
| 96 | |
| 97 | for (ptr = 0; ptr < data->nr_states; ptr++) |
| 98 | if (data->states[ptr].gpios == data->state) |
| 99 | return data->states[ptr].value; |
| 100 | |
| 101 | return -EINVAL; |
| 102 | } |
| 103 | |
| 104 | static int gpio_regulator_set_value(struct regulator_dev *dev, |
| 105 | int min, int max) |
| 106 | { |
| 107 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 108 | int ptr, target, state; |
| 109 | |
| 110 | target = -1; |
| 111 | for (ptr = 0; ptr < data->nr_states; ptr++) |
| 112 | if (data->states[ptr].value >= min && |
| 113 | data->states[ptr].value <= max) |
| 114 | target = data->states[ptr].gpios; |
| 115 | |
| 116 | if (target < 0) |
| 117 | return -EINVAL; |
| 118 | |
| 119 | for (ptr = 0; ptr < data->nr_gpios; ptr++) { |
| 120 | state = (target & (1 << ptr)) >> ptr; |
| 121 | gpio_set_value(data->gpios[ptr].gpio, state); |
| 122 | } |
| 123 | data->state = target; |
| 124 | |
| 125 | return 0; |
| 126 | } |
| 127 | |
| 128 | static int gpio_regulator_set_voltage(struct regulator_dev *dev, |
| 129 | int min_uV, int max_uV, |
| 130 | unsigned *selector) |
| 131 | { |
| 132 | return gpio_regulator_set_value(dev, min_uV, max_uV); |
| 133 | } |
| 134 | |
| 135 | static int gpio_regulator_list_voltage(struct regulator_dev *dev, |
| 136 | unsigned selector) |
| 137 | { |
| 138 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 139 | |
| 140 | if (selector >= data->nr_states) |
| 141 | return -EINVAL; |
| 142 | |
| 143 | return data->states[selector].value; |
| 144 | } |
| 145 | |
| 146 | static int gpio_regulator_set_current_limit(struct regulator_dev *dev, |
| 147 | int min_uA, int max_uA) |
| 148 | { |
| 149 | return gpio_regulator_set_value(dev, min_uA, max_uA); |
| 150 | } |
| 151 | |
| 152 | static struct regulator_ops gpio_regulator_voltage_ops = { |
| 153 | .is_enabled = gpio_regulator_is_enabled, |
| 154 | .enable = gpio_regulator_enable, |
| 155 | .disable = gpio_regulator_disable, |
| 156 | .enable_time = gpio_regulator_enable_time, |
| 157 | .get_voltage = gpio_regulator_get_value, |
| 158 | .set_voltage = gpio_regulator_set_voltage, |
| 159 | .list_voltage = gpio_regulator_list_voltage, |
| 160 | }; |
| 161 | |
| 162 | static struct regulator_ops gpio_regulator_current_ops = { |
| 163 | .is_enabled = gpio_regulator_is_enabled, |
| 164 | .enable = gpio_regulator_enable, |
| 165 | .disable = gpio_regulator_disable, |
| 166 | .enable_time = gpio_regulator_enable_time, |
| 167 | .get_current_limit = gpio_regulator_get_value, |
| 168 | .set_current_limit = gpio_regulator_set_current_limit, |
| 169 | }; |
| 170 | |
| 171 | static int __devinit gpio_regulator_probe(struct platform_device *pdev) |
| 172 | { |
| 173 | struct gpio_regulator_config *config = pdev->dev.platform_data; |
| 174 | struct gpio_regulator_data *drvdata; |
| 175 | int ptr, ret, state; |
| 176 | |
| 177 | drvdata = kzalloc(sizeof(struct gpio_regulator_data), GFP_KERNEL); |
| 178 | if (drvdata == NULL) { |
| 179 | dev_err(&pdev->dev, "Failed to allocate device data\n"); |
| 180 | return -ENOMEM; |
| 181 | } |
| 182 | |
| 183 | drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); |
| 184 | if (drvdata->desc.name == NULL) { |
| 185 | dev_err(&pdev->dev, "Failed to allocate supply name\n"); |
| 186 | ret = -ENOMEM; |
| 187 | goto err; |
| 188 | } |
| 189 | |
| 190 | drvdata->gpios = kmemdup(config->gpios, |
| 191 | config->nr_gpios * sizeof(struct gpio), |
| 192 | GFP_KERNEL); |
| 193 | if (drvdata->gpios == NULL) { |
| 194 | dev_err(&pdev->dev, "Failed to allocate gpio data\n"); |
| 195 | ret = -ENOMEM; |
| 196 | goto err_name; |
| 197 | } |
| 198 | |
| 199 | drvdata->states = kmemdup(config->states, |
| 200 | config->nr_states * |
| 201 | sizeof(struct gpio_regulator_state), |
| 202 | GFP_KERNEL); |
| 203 | if (drvdata->states == NULL) { |
| 204 | dev_err(&pdev->dev, "Failed to allocate state data\n"); |
| 205 | ret = -ENOMEM; |
| 206 | goto err_memgpio; |
| 207 | } |
| 208 | drvdata->nr_states = config->nr_states; |
| 209 | |
| 210 | drvdata->desc.owner = THIS_MODULE; |
| 211 | |
| 212 | /* handle regulator type*/ |
| 213 | switch (config->type) { |
| 214 | case REGULATOR_VOLTAGE: |
| 215 | drvdata->desc.type = REGULATOR_VOLTAGE; |
| 216 | drvdata->desc.ops = &gpio_regulator_voltage_ops; |
| 217 | drvdata->desc.n_voltages = config->nr_states; |
| 218 | break; |
| 219 | case REGULATOR_CURRENT: |
| 220 | drvdata->desc.type = REGULATOR_CURRENT; |
| 221 | drvdata->desc.ops = &gpio_regulator_current_ops; |
| 222 | break; |
| 223 | default: |
| 224 | dev_err(&pdev->dev, "No regulator type set\n"); |
| 225 | ret = -EINVAL; |
| 226 | goto err_memgpio; |
| 227 | break; |
| 228 | } |
| 229 | |
| 230 | drvdata->enable_gpio = config->enable_gpio; |
| 231 | drvdata->startup_delay = config->startup_delay; |
| 232 | |
| 233 | if (gpio_is_valid(config->enable_gpio)) { |
| 234 | drvdata->enable_high = config->enable_high; |
| 235 | |
| 236 | ret = gpio_request(config->enable_gpio, config->supply_name); |
| 237 | if (ret) { |
| 238 | dev_err(&pdev->dev, |
| 239 | "Could not obtain regulator enable GPIO %d: %d\n", |
| 240 | config->enable_gpio, ret); |
| 241 | goto err_memstate; |
| 242 | } |
| 243 | |
| 244 | /* set output direction without changing state |
| 245 | * to prevent glitch |
| 246 | */ |
| 247 | if (config->enabled_at_boot) { |
| 248 | drvdata->is_enabled = true; |
| 249 | ret = gpio_direction_output(config->enable_gpio, |
| 250 | config->enable_high); |
| 251 | } else { |
| 252 | drvdata->is_enabled = false; |
| 253 | ret = gpio_direction_output(config->enable_gpio, |
| 254 | !config->enable_high); |
| 255 | } |
| 256 | |
| 257 | if (ret) { |
| 258 | dev_err(&pdev->dev, |
| 259 | "Could not configure regulator enable GPIO %d direction: %d\n", |
| 260 | config->enable_gpio, ret); |
| 261 | goto err_enablegpio; |
| 262 | } |
| 263 | } else { |
| 264 | /* Regulator without GPIO control is considered |
| 265 | * always enabled |
| 266 | */ |
| 267 | drvdata->is_enabled = true; |
| 268 | } |
| 269 | |
| 270 | drvdata->nr_gpios = config->nr_gpios; |
| 271 | ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); |
| 272 | if (ret) { |
| 273 | dev_err(&pdev->dev, |
| 274 | "Could not obtain regulator setting GPIOs: %d\n", ret); |
| 275 | goto err_enablegpio; |
| 276 | } |
| 277 | |
| 278 | /* build initial state from gpio init data. */ |
| 279 | state = 0; |
| 280 | for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) { |
| 281 | if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH) |
| 282 | state |= (1 << ptr); |
| 283 | } |
| 284 | drvdata->state = state; |
| 285 | |
| 286 | drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev, |
| 287 | config->init_data, drvdata); |
| 288 | if (IS_ERR(drvdata->dev)) { |
| 289 | ret = PTR_ERR(drvdata->dev); |
| 290 | dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); |
| 291 | goto err_stategpio; |
| 292 | } |
| 293 | |
| 294 | platform_set_drvdata(pdev, drvdata); |
| 295 | |
| 296 | return 0; |
| 297 | |
| 298 | err_stategpio: |
| 299 | gpio_free_array(drvdata->gpios, drvdata->nr_gpios); |
| 300 | err_enablegpio: |
| 301 | if (gpio_is_valid(config->enable_gpio)) |
| 302 | gpio_free(config->enable_gpio); |
| 303 | err_memstate: |
| 304 | kfree(drvdata->states); |
| 305 | err_memgpio: |
| 306 | kfree(drvdata->gpios); |
| 307 | err_name: |
| 308 | kfree(drvdata->desc.name); |
| 309 | err: |
| 310 | kfree(drvdata); |
| 311 | return ret; |
| 312 | } |
| 313 | |
| 314 | static int __devexit gpio_regulator_remove(struct platform_device *pdev) |
| 315 | { |
| 316 | struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev); |
| 317 | |
| 318 | regulator_unregister(drvdata->dev); |
| 319 | |
| 320 | gpio_free_array(drvdata->gpios, drvdata->nr_gpios); |
| 321 | |
| 322 | kfree(drvdata->states); |
| 323 | kfree(drvdata->gpios); |
| 324 | |
| 325 | if (gpio_is_valid(drvdata->enable_gpio)) |
| 326 | gpio_free(drvdata->enable_gpio); |
| 327 | |
| 328 | kfree(drvdata->desc.name); |
| 329 | kfree(drvdata); |
| 330 | |
| 331 | return 0; |
| 332 | } |
| 333 | |
| 334 | static struct platform_driver gpio_regulator_driver = { |
| 335 | .probe = gpio_regulator_probe, |
| 336 | .remove = __devexit_p(gpio_regulator_remove), |
| 337 | .driver = { |
| 338 | .name = "gpio-regulator", |
| 339 | .owner = THIS_MODULE, |
| 340 | }, |
| 341 | }; |
| 342 | |
| 343 | static int __init gpio_regulator_init(void) |
| 344 | { |
| 345 | return platform_driver_register(&gpio_regulator_driver); |
| 346 | } |
| 347 | subsys_initcall(gpio_regulator_init); |
| 348 | |
| 349 | static void __exit gpio_regulator_exit(void) |
| 350 | { |
| 351 | platform_driver_unregister(&gpio_regulator_driver); |
| 352 | } |
| 353 | module_exit(gpio_regulator_exit); |
| 354 | |
| 355 | MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); |
| 356 | MODULE_DESCRIPTION("gpio voltage regulator"); |
| 357 | MODULE_LICENSE("GPL"); |
| 358 | MODULE_ALIAS("platform:gpio-regulator"); |