blob: 8cfc3191be50aee8f9157ba95e84c49446d1ae55 [file] [log] [blame]
Jason Wessel91777822009-08-20 15:39:53 -05001/*
2 * Standalone EHCI usb debug driver
3 *
4 * Originally written by:
5 * Eric W. Biederman" <ebiederm@xmission.com> and
6 * Yinghai Lu <yhlu.kernel@gmail.com>
7 *
8 * Changes for early/late printk and HW errata:
9 * Jason Wessel <jason.wessel@windriver.com>
10 * Copyright (C) 2009 Wind River Systems, Inc.
11 *
12 */
13
Jason Wesseldf6c5162009-08-20 15:39:48 -050014#include <linux/console.h>
15#include <linux/errno.h>
Jason Wessel91777822009-08-20 15:39:53 -050016#include <linux/module.h>
Jason Wesseldf6c5162009-08-20 15:39:48 -050017#include <linux/pci_regs.h>
18#include <linux/pci_ids.h>
19#include <linux/usb/ch9.h>
20#include <linux/usb/ehci_def.h>
21#include <linux/delay.h>
Jason Wessel4fe1da42010-05-20 21:04:31 -050022#include <linux/serial_core.h>
Jan Beulich86effe52012-10-29 16:45:54 +000023#include <linux/kconfig.h>
Jason Wessel4fe1da42010-05-20 21:04:31 -050024#include <linux/kgdb.h>
25#include <linux/kthread.h>
Jason Wesseldf6c5162009-08-20 15:39:48 -050026#include <asm/io.h>
27#include <asm/pci-direct.h>
28#include <asm/fixmap.h>
29
Jason Wessel91777822009-08-20 15:39:53 -050030/* The code here is intended to talk directly to the EHCI debug port
31 * and does not require that you have any kind of USB host controller
32 * drivers or USB device drivers compiled into the kernel.
33 *
34 * If you make a change to anything in here, the following test cases
35 * need to pass where a USB debug device works in the following
36 * configurations.
37 *
38 * 1. boot args: earlyprintk=dbgp
39 * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
40 * o kernel compiled with CONFIG_USB_EHCI_HCD=y
41 * 2. boot args: earlyprintk=dbgp,keep
42 * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
43 * o kernel compiled with CONFIG_USB_EHCI_HCD=y
44 * 3. boot args: earlyprintk=dbgp console=ttyUSB0
45 * o kernel has CONFIG_USB_EHCI_HCD=y and
46 * CONFIG_USB_SERIAL_DEBUG=y
47 * 4. boot args: earlyprintk=vga,dbgp
48 * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set
49 * o kernel compiled with CONFIG_USB_EHCI_HCD=y
50 *
51 * For the 4th configuration you can turn on or off the DBGP_DEBUG
52 * such that you can debug the dbgp device's driver code.
53 */
54
55static int dbgp_phys_port = 1;
Jason Wessel56faf0f2009-08-20 15:39:51 -050056
Jason Wesseldf6c5162009-08-20 15:39:48 -050057static struct ehci_caps __iomem *ehci_caps;
58static struct ehci_regs __iomem *ehci_regs;
59static struct ehci_dbg_port __iomem *ehci_debug;
Jason Wessel91777822009-08-20 15:39:53 -050060static int dbgp_not_safe; /* Cannot use debug device during ehci reset */
Jason Wesseldf6c5162009-08-20 15:39:48 -050061static unsigned int dbgp_endpoint_out;
Jason Wessel4fe1da42010-05-20 21:04:31 -050062static unsigned int dbgp_endpoint_in;
Jason Wesseldf6c5162009-08-20 15:39:48 -050063
64struct ehci_dev {
65 u32 bus;
66 u32 slot;
67 u32 func;
68};
69
70static struct ehci_dev ehci_dev;
71
72#define USB_DEBUG_DEVNUM 127
73
Jason Wessel91777822009-08-20 15:39:53 -050074#ifdef DBGP_DEBUG
75#define dbgp_printk printk
76static void dbgp_ehci_status(char *str)
77{
78 if (!ehci_debug)
79 return;
80 dbgp_printk("dbgp: %s\n", str);
81 dbgp_printk(" Debug control: %08x", readl(&ehci_debug->control));
82 dbgp_printk(" ehci cmd : %08x", readl(&ehci_regs->command));
83 dbgp_printk(" ehci conf flg: %08x\n",
84 readl(&ehci_regs->configured_flag));
85 dbgp_printk(" ehci status : %08x", readl(&ehci_regs->status));
86 dbgp_printk(" ehci portsc : %08x\n",
87 readl(&ehci_regs->port_status[dbgp_phys_port - 1]));
88}
89#else
90static inline void dbgp_ehci_status(char *str) { }
91static inline void dbgp_printk(const char *fmt, ...) { }
92#endif
93
Jason Wesseldf6c5162009-08-20 15:39:48 -050094static inline u32 dbgp_len_update(u32 x, u32 len)
95{
96 return (x & ~0x0f) | (len & 0x0f);
97}
98
Jason Wessel4fe1da42010-05-20 21:04:31 -050099#ifdef CONFIG_KGDB
100static struct kgdb_io kgdbdbgp_io_ops;
101#define dbgp_kgdb_mode (dbg_io_ops == &kgdbdbgp_io_ops)
102#else
103#define dbgp_kgdb_mode (0)
104#endif
105
Jan Anderssonc4301312011-05-03 20:11:57 +0200106/* Local version of HC_LENGTH macro as ehci struct is not available here */
107#define EARLY_HC_LENGTH(p) (0x00ff & (p)) /* bits 7 : 0 */
108
Jason Wesseldf6c5162009-08-20 15:39:48 -0500109/*
110 * USB Packet IDs (PIDs)
111 */
112
113/* token */
114#define USB_PID_OUT 0xe1
115#define USB_PID_IN 0x69
116#define USB_PID_SOF 0xa5
117#define USB_PID_SETUP 0x2d
118/* handshake */
119#define USB_PID_ACK 0xd2
120#define USB_PID_NAK 0x5a
121#define USB_PID_STALL 0x1e
122#define USB_PID_NYET 0x96
123/* data */
124#define USB_PID_DATA0 0xc3
125#define USB_PID_DATA1 0x4b
126#define USB_PID_DATA2 0x87
127#define USB_PID_MDATA 0x0f
128/* Special */
129#define USB_PID_PREAMBLE 0x3c
130#define USB_PID_ERR 0x3c
131#define USB_PID_SPLIT 0x78
132#define USB_PID_PING 0xb4
133#define USB_PID_UNDEF_0 0xf0
134
135#define USB_PID_DATA_TOGGLE 0x88
136#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
137
138#define PCI_CAP_ID_EHCI_DEBUG 0xa
139
140#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
141#define HUB_SHORT_RESET_TIME 10
142#define HUB_LONG_RESET_TIME 200
143#define HUB_RESET_TIMEOUT 500
144
145#define DBGP_MAX_PACKET 8
Jason Wessel91777822009-08-20 15:39:53 -0500146#define DBGP_TIMEOUT (250 * 1000)
Jason Wessel815e1732010-02-05 11:49:05 -0600147#define DBGP_LOOPS 1000
148
149static inline u32 dbgp_pid_write_update(u32 x, u32 tok)
150{
151 static int data0 = USB_PID_DATA1;
152 data0 ^= USB_PID_DATA_TOGGLE;
153 return (x & 0xffff0000) | (data0 << 8) | (tok & 0xff);
154}
155
156static inline u32 dbgp_pid_read_update(u32 x, u32 tok)
157{
158 return (x & 0xffff0000) | (USB_PID_DATA0 << 8) | (tok & 0xff);
159}
Jason Wesseldf6c5162009-08-20 15:39:48 -0500160
161static int dbgp_wait_until_complete(void)
162{
163 u32 ctrl;
Jason Wessel91777822009-08-20 15:39:53 -0500164 int loop = DBGP_TIMEOUT;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500165
166 do {
167 ctrl = readl(&ehci_debug->control);
168 /* Stop when the transaction is finished */
169 if (ctrl & DBGP_DONE)
170 break;
Jason Wessel91777822009-08-20 15:39:53 -0500171 udelay(1);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500172 } while (--loop > 0);
173
174 if (!loop)
Jason Wessel91777822009-08-20 15:39:53 -0500175 return -DBGP_TIMEOUT;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500176
177 /*
178 * Now that we have observed the completed transaction,
179 * clear the done bit.
180 */
181 writel(ctrl | DBGP_DONE, &ehci_debug->control);
182 return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
183}
184
Jason Wessel91777822009-08-20 15:39:53 -0500185static inline void dbgp_mdelay(int ms)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500186{
187 int i;
188
189 while (ms--) {
190 for (i = 0; i < 1000; i++)
191 outb(0x1, 0x80);
192 }
193}
194
195static void dbgp_breath(void)
196{
197 /* Sleep to give the debug port a chance to breathe */
198}
199
Jason Wessel4fe1da42010-05-20 21:04:31 -0500200static int dbgp_wait_until_done(unsigned ctrl, int loop)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500201{
202 u32 pids, lpid;
203 int ret;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500204
205retry:
206 writel(ctrl | DBGP_GO, &ehci_debug->control);
207 ret = dbgp_wait_until_complete();
208 pids = readl(&ehci_debug->pids);
209 lpid = DBGP_PID_GET(pids);
210
Jason Wessel91777822009-08-20 15:39:53 -0500211 if (ret < 0) {
212 /* A -DBGP_TIMEOUT failure here means the device has
213 * failed, perhaps because it was unplugged, in which
214 * case we do not want to hang the system so the dbgp
215 * will be marked as unsafe to use. EHCI reset is the
216 * only way to recover if you unplug the dbgp device.
217 */
218 if (ret == -DBGP_TIMEOUT && !dbgp_not_safe)
219 dbgp_not_safe = 1;
Jason Wessel815e1732010-02-05 11:49:05 -0600220 if (ret == -DBGP_ERR_BAD && --loop > 0)
221 goto retry;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500222 return ret;
Jason Wessel91777822009-08-20 15:39:53 -0500223 }
Jason Wesseldf6c5162009-08-20 15:39:48 -0500224
225 /*
226 * If the port is getting full or it has dropped data
227 * start pacing ourselves, not necessary but it's friendly.
228 */
229 if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
230 dbgp_breath();
231
232 /* If I get a NACK reissue the transmission */
233 if (lpid == USB_PID_NAK) {
234 if (--loop > 0)
235 goto retry;
236 }
237
238 return ret;
239}
240
Jason Wessel91777822009-08-20 15:39:53 -0500241static inline void dbgp_set_data(const void *buf, int size)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500242{
243 const unsigned char *bytes = buf;
244 u32 lo, hi;
245 int i;
246
247 lo = hi = 0;
248 for (i = 0; i < 4 && i < size; i++)
249 lo |= bytes[i] << (8*i);
250 for (; i < 8 && i < size; i++)
251 hi |= bytes[i] << (8*(i - 4));
252 writel(lo, &ehci_debug->data03);
253 writel(hi, &ehci_debug->data47);
254}
255
Jason Wessel91777822009-08-20 15:39:53 -0500256static inline void dbgp_get_data(void *buf, int size)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500257{
258 unsigned char *bytes = buf;
259 u32 lo, hi;
260 int i;
261
262 lo = readl(&ehci_debug->data03);
263 hi = readl(&ehci_debug->data47);
264 for (i = 0; i < 4 && i < size; i++)
265 bytes[i] = (lo >> (8*i)) & 0xff;
266 for (; i < 8 && i < size; i++)
267 bytes[i] = (hi >> (8*(i - 4))) & 0xff;
268}
269
Jason Wessel815e1732010-02-05 11:49:05 -0600270static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
271 const char *bytes, int size)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500272{
Jason Wessel815e1732010-02-05 11:49:05 -0600273 int ret;
274 u32 addr;
Jason Wessel68d29562009-08-20 15:39:56 -0500275 u32 pids, ctrl;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500276
Jason Wessel815e1732010-02-05 11:49:05 -0600277 if (size > DBGP_MAX_PACKET)
278 return -1;
279
280 addr = DBGP_EPADDR(devnum, endpoint);
281
Jason Wesseldf6c5162009-08-20 15:39:48 -0500282 pids = readl(&ehci_debug->pids);
Jason Wessel815e1732010-02-05 11:49:05 -0600283 pids = dbgp_pid_write_update(pids, USB_PID_OUT);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500284
285 ctrl = readl(&ehci_debug->control);
286 ctrl = dbgp_len_update(ctrl, size);
287 ctrl |= DBGP_OUT;
288 ctrl |= DBGP_GO;
289
290 dbgp_set_data(bytes, size);
291 writel(addr, &ehci_debug->address);
292 writel(pids, &ehci_debug->pids);
Jason Wessel4fe1da42010-05-20 21:04:31 -0500293 ret = dbgp_wait_until_done(ctrl, DBGP_LOOPS);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500294
295 return ret;
296}
297
Jason Wessel91777822009-08-20 15:39:53 -0500298static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
Jason Wessel4fe1da42010-05-20 21:04:31 -0500299 int size, int loops)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500300{
301 u32 pids, addr, ctrl;
302 int ret;
303
304 if (size > DBGP_MAX_PACKET)
305 return -1;
306
307 addr = DBGP_EPADDR(devnum, endpoint);
308
309 pids = readl(&ehci_debug->pids);
Jason Wessel815e1732010-02-05 11:49:05 -0600310 pids = dbgp_pid_read_update(pids, USB_PID_IN);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500311
312 ctrl = readl(&ehci_debug->control);
313 ctrl = dbgp_len_update(ctrl, size);
314 ctrl &= ~DBGP_OUT;
315 ctrl |= DBGP_GO;
316
317 writel(addr, &ehci_debug->address);
318 writel(pids, &ehci_debug->pids);
Jason Wessel4fe1da42010-05-20 21:04:31 -0500319 ret = dbgp_wait_until_done(ctrl, loops);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500320 if (ret < 0)
321 return ret;
322
323 if (size > ret)
324 size = ret;
325 dbgp_get_data(data, size);
326 return ret;
327}
328
Jason Wessel91777822009-08-20 15:39:53 -0500329static int dbgp_control_msg(unsigned devnum, int requesttype,
Jason Wesseldf6c5162009-08-20 15:39:48 -0500330 int request, int value, int index, void *data, int size)
331{
332 u32 pids, addr, ctrl;
333 struct usb_ctrlrequest req;
334 int read;
335 int ret;
336
337 read = (requesttype & USB_DIR_IN) != 0;
Jeffrin Jose4d4847b2012-05-20 00:56:58 +0530338 if (size > (read ? DBGP_MAX_PACKET : 0))
Jason Wesseldf6c5162009-08-20 15:39:48 -0500339 return -1;
340
341 /* Compute the control message */
342 req.bRequestType = requesttype;
343 req.bRequest = request;
344 req.wValue = cpu_to_le16(value);
345 req.wIndex = cpu_to_le16(index);
346 req.wLength = cpu_to_le16(size);
347
348 pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
349 addr = DBGP_EPADDR(devnum, 0);
350
351 ctrl = readl(&ehci_debug->control);
352 ctrl = dbgp_len_update(ctrl, sizeof(req));
353 ctrl |= DBGP_OUT;
354 ctrl |= DBGP_GO;
355
356 /* Send the setup message */
357 dbgp_set_data(&req, sizeof(req));
358 writel(addr, &ehci_debug->address);
359 writel(pids, &ehci_debug->pids);
Jason Wessel4fe1da42010-05-20 21:04:31 -0500360 ret = dbgp_wait_until_done(ctrl, DBGP_LOOPS);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500361 if (ret < 0)
362 return ret;
363
364 /* Read the result */
Jason Wessel4fe1da42010-05-20 21:04:31 -0500365 return dbgp_bulk_read(devnum, 0, data, size, DBGP_LOOPS);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500366}
367
Jason Wesseldf6c5162009-08-20 15:39:48 -0500368/* Find a PCI capability */
369static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
370{
371 u8 pos;
372 int bytes;
373
374 if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
375 PCI_STATUS_CAP_LIST))
376 return 0;
377
378 pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
379 for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
380 u8 id;
381
382 pos &= ~3;
383 id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
384 if (id == 0xff)
385 break;
386 if (id == cap)
387 return pos;
388
389 pos = read_pci_config_byte(num, slot, func,
390 pos+PCI_CAP_LIST_NEXT);
391 }
392 return 0;
393}
394
395static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
396{
397 u32 class;
398
399 class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
400 if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
401 return 0;
402
403 return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
404}
405
406static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
407{
408 u32 bus, slot, func;
409
410 for (bus = 0; bus < 256; bus++) {
411 for (slot = 0; slot < 32; slot++) {
412 for (func = 0; func < 8; func++) {
413 unsigned cap;
414
415 cap = __find_dbgp(bus, slot, func);
416
417 if (!cap)
418 continue;
419 if (ehci_num-- != 0)
420 continue;
421 *rbus = bus;
422 *rslot = slot;
423 *rfunc = func;
424 return cap;
425 }
426 }
427 }
428 return 0;
429}
430
Jason Wessel91777822009-08-20 15:39:53 -0500431static int dbgp_ehci_startup(void)
432{
433 u32 ctrl, cmd, status;
434 int loop;
435
436 /* Claim ownership, but do not enable yet */
437 ctrl = readl(&ehci_debug->control);
438 ctrl |= DBGP_OWNER;
439 ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
440 writel(ctrl, &ehci_debug->control);
441 udelay(1);
442
443 dbgp_ehci_status("EHCI startup");
444 /* Start the ehci running */
445 cmd = readl(&ehci_regs->command);
446 cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
447 cmd |= CMD_RUN;
448 writel(cmd, &ehci_regs->command);
449
450 /* Ensure everything is routed to the EHCI */
451 writel(FLAG_CF, &ehci_regs->configured_flag);
452
453 /* Wait until the controller is no longer halted */
Colin Ian Kingf96a4212012-07-30 16:06:42 +0100454 loop = 1000;
Jason Wessel91777822009-08-20 15:39:53 -0500455 do {
456 status = readl(&ehci_regs->status);
457 if (!(status & STS_HALT))
458 break;
459 udelay(1);
460 } while (--loop > 0);
461
462 if (!loop) {
463 dbgp_printk("ehci can not be started\n");
464 return -ENODEV;
465 }
466 dbgp_printk("ehci started\n");
467 return 0;
468}
469
470static int dbgp_ehci_controller_reset(void)
471{
472 int loop = 250 * 1000;
473 u32 cmd;
474
475 /* Reset the EHCI controller */
476 cmd = readl(&ehci_regs->command);
477 cmd |= CMD_RESET;
478 writel(cmd, &ehci_regs->command);
479 do {
480 cmd = readl(&ehci_regs->command);
481 } while ((cmd & CMD_RESET) && (--loop > 0));
482
483 if (!loop) {
484 dbgp_printk("can not reset ehci\n");
485 return -1;
486 }
487 dbgp_ehci_status("ehci reset done");
488 return 0;
489}
490static int ehci_wait_for_port(int port);
491/* Return 0 on success
492 * Return -ENODEV for any general failure
493 * Return -EIO if wait for port fails
494 */
Jan Beulich9fa57802012-09-18 12:23:02 +0100495static int _dbgp_external_startup(void)
Jason Wessel91777822009-08-20 15:39:53 -0500496{
497 int devnum;
498 struct usb_debug_descriptor dbgp_desc;
499 int ret;
Jason Wesselaab2d402009-08-20 15:39:55 -0500500 u32 ctrl, portsc, cmd;
Jason Wessel91777822009-08-20 15:39:53 -0500501 int dbg_port = dbgp_phys_port;
502 int tries = 3;
Jason Wesselaab2d402009-08-20 15:39:55 -0500503 int reset_port_tries = 1;
504 int try_hard_once = 1;
Jason Wessel91777822009-08-20 15:39:53 -0500505
Jason Wesselaab2d402009-08-20 15:39:55 -0500506try_port_reset_again:
Jason Wessel91777822009-08-20 15:39:53 -0500507 ret = dbgp_ehci_startup();
508 if (ret)
509 return ret;
510
511 /* Wait for a device to show up in the debug port */
512 ret = ehci_wait_for_port(dbg_port);
513 if (ret < 0) {
514 portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
Jason Wesselaab2d402009-08-20 15:39:55 -0500515 if (!(portsc & PORT_CONNECT) && try_hard_once) {
516 /* Last ditch effort to try to force enable
517 * the debug device by using the packet test
518 * ehci command to try and wake it up. */
519 try_hard_once = 0;
520 cmd = readl(&ehci_regs->command);
521 cmd &= ~CMD_RUN;
522 writel(cmd, &ehci_regs->command);
523 portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
524 portsc |= PORT_TEST_PKT;
525 writel(portsc, &ehci_regs->port_status[dbg_port - 1]);
526 dbgp_ehci_status("Trying to force debug port online");
527 mdelay(50);
528 dbgp_ehci_controller_reset();
529 goto try_port_reset_again;
530 } else if (reset_port_tries--) {
531 goto try_port_reset_again;
532 }
Jason Wessel91777822009-08-20 15:39:53 -0500533 dbgp_printk("No device found in debug port\n");
534 return -EIO;
535 }
536 dbgp_ehci_status("wait for port done");
537
538 /* Enable the debug port */
539 ctrl = readl(&ehci_debug->control);
540 ctrl |= DBGP_CLAIM;
541 writel(ctrl, &ehci_debug->control);
542 ctrl = readl(&ehci_debug->control);
543 if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
544 dbgp_printk("No device in debug port\n");
545 writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
546 return -ENODEV;
547 }
548 dbgp_ehci_status("debug ported enabled");
549
550 /* Completely transfer the debug device to the debug controller */
551 portsc = readl(&ehci_regs->port_status[dbg_port - 1]);
552 portsc &= ~PORT_PE;
553 writel(portsc, &ehci_regs->port_status[dbg_port - 1]);
554
555 dbgp_mdelay(100);
556
557try_again:
558 /* Find the debug device and make it device number 127 */
559 for (devnum = 0; devnum <= 127; devnum++) {
560 ret = dbgp_control_msg(devnum,
561 USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
562 USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
563 &dbgp_desc, sizeof(dbgp_desc));
564 if (ret > 0)
565 break;
566 }
567 if (devnum > 127) {
568 dbgp_printk("Could not find attached debug device\n");
569 goto err;
570 }
Jason Wessel91777822009-08-20 15:39:53 -0500571 dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
Jason Wessel4fe1da42010-05-20 21:04:31 -0500572 dbgp_endpoint_in = dbgp_desc.bDebugInEndpoint;
Jason Wessel91777822009-08-20 15:39:53 -0500573
574 /* Move the device to 127 if it isn't already there */
575 if (devnum != USB_DEBUG_DEVNUM) {
576 ret = dbgp_control_msg(devnum,
577 USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
578 USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
579 if (ret < 0) {
580 dbgp_printk("Could not move attached device to %d\n",
581 USB_DEBUG_DEVNUM);
582 goto err;
583 }
584 devnum = USB_DEBUG_DEVNUM;
585 dbgp_printk("debug device renamed to 127\n");
586 }
587
588 /* Enable the debug interface */
589 ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
590 USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
591 USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
592 if (ret < 0) {
593 dbgp_printk(" Could not enable the debug device\n");
594 goto err;
595 }
596 dbgp_printk("debug interface enabled\n");
597 /* Perform a small write to get the even/odd data state in sync
598 */
599 ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
600 if (ret < 0) {
601 dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
602 goto err;
603 }
Ferenc Wagneref58d972011-01-10 19:00:35 +0100604 dbgp_printk("small write done\n");
Jason Wessel91777822009-08-20 15:39:53 -0500605 dbgp_not_safe = 0;
606
607 return 0;
608err:
609 if (tries--)
610 goto try_again;
611 return -ENODEV;
612}
Jan Beulich9fa57802012-09-18 12:23:02 +0100613
Jan Beulich40b52372009-11-20 13:50:53 +0000614static int ehci_reset_port(int port)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500615{
616 u32 portsc;
617 u32 delay_time, delay;
618 int loop;
619
Jason Wessel91777822009-08-20 15:39:53 -0500620 dbgp_ehci_status("reset port");
Jason Wesseldf6c5162009-08-20 15:39:48 -0500621 /* Reset the usb debug port */
622 portsc = readl(&ehci_regs->port_status[port - 1]);
623 portsc &= ~PORT_PE;
624 portsc |= PORT_RESET;
625 writel(portsc, &ehci_regs->port_status[port - 1]);
626
627 delay = HUB_ROOT_RESET_TIME;
628 for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
629 delay_time += delay) {
630 dbgp_mdelay(delay);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500631 portsc = readl(&ehci_regs->port_status[port - 1]);
Jason Wessel56faf0f2009-08-20 15:39:51 -0500632 if (!(portsc & PORT_RESET))
633 break;
634 }
Jason Wesseldf6c5162009-08-20 15:39:48 -0500635 if (portsc & PORT_RESET) {
636 /* force reset to complete */
Jason Wessel56faf0f2009-08-20 15:39:51 -0500637 loop = 100 * 1000;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500638 writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
639 &ehci_regs->port_status[port - 1]);
640 do {
Jason Wessel56faf0f2009-08-20 15:39:51 -0500641 udelay(1);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500642 portsc = readl(&ehci_regs->port_status[port-1]);
643 } while ((portsc & PORT_RESET) && (--loop > 0));
644 }
645
646 /* Device went away? */
647 if (!(portsc & PORT_CONNECT))
648 return -ENOTCONN;
649
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300650 /* bomb out completely if something weird happened */
Jason Wesseldf6c5162009-08-20 15:39:48 -0500651 if ((portsc & PORT_CSC))
652 return -EINVAL;
653
654 /* If we've finished resetting, then break out of the loop */
655 if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
656 return 0;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500657 return -EBUSY;
658}
659
Jason Wessel91777822009-08-20 15:39:53 -0500660static int ehci_wait_for_port(int port)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500661{
662 u32 status;
663 int ret, reps;
664
Jason Wessel56faf0f2009-08-20 15:39:51 -0500665 for (reps = 0; reps < 300; reps++) {
Jason Wesseldf6c5162009-08-20 15:39:48 -0500666 status = readl(&ehci_regs->status);
Jason Wessel56faf0f2009-08-20 15:39:51 -0500667 if (status & STS_PCD)
668 break;
669 dbgp_mdelay(1);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500670 }
Jason Wessel56faf0f2009-08-20 15:39:51 -0500671 ret = ehci_reset_port(port);
672 if (ret == 0)
673 return 0;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500674 return -ENOTCONN;
675}
676
Jason Wesseldf6c5162009-08-20 15:39:48 -0500677typedef void (*set_debug_port_t)(int port);
678
679static void __init default_set_debug_port(int port)
680{
681}
682
683static set_debug_port_t __initdata set_debug_port = default_set_debug_port;
684
685static void __init nvidia_set_debug_port(int port)
686{
687 u32 dword;
688 dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
689 0x74);
690 dword &= ~(0x0f<<12);
691 dword |= ((port & 0x0f)<<12);
692 write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
693 dword);
694 dbgp_printk("set debug port to %d\n", port);
695}
696
697static void __init detect_set_debug_port(void)
698{
699 u32 vendorid;
700
701 vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
702 0x00);
703
704 if ((vendorid & 0xffff) == 0x10de) {
705 dbgp_printk("using nvidia set_debug_port\n");
706 set_debug_port = nvidia_set_debug_port;
707 }
708}
709
Jason Wessel093344e2009-08-20 15:39:50 -0500710/* The code in early_ehci_bios_handoff() is derived from the usb pci
711 * quirk initialization, but altered so as to use the early PCI
712 * routines. */
713#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
714#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
715static void __init early_ehci_bios_handoff(void)
716{
717 u32 hcc_params = readl(&ehci_caps->hcc_params);
718 int offset = (hcc_params >> 8) & 0xff;
719 u32 cap;
720 int msec;
721
722 if (!offset)
723 return;
724
725 cap = read_pci_config(ehci_dev.bus, ehci_dev.slot,
726 ehci_dev.func, offset);
727 dbgp_printk("dbgp: ehci BIOS state %08x\n", cap);
728
729 if ((cap & 0xff) == 1 && (cap & EHCI_USBLEGSUP_BIOS)) {
730 dbgp_printk("dbgp: BIOS handoff\n");
731 write_pci_config_byte(ehci_dev.bus, ehci_dev.slot,
732 ehci_dev.func, offset + 3, 1);
733 }
734
735 /* if boot firmware now owns EHCI, spin till it hands it over. */
736 msec = 1000;
737 while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
738 mdelay(10);
739 msec -= 10;
740 cap = read_pci_config(ehci_dev.bus, ehci_dev.slot,
741 ehci_dev.func, offset);
742 }
743
744 if (cap & EHCI_USBLEGSUP_BIOS) {
745 /* well, possibly buggy BIOS... try to shut it down,
746 * and hope nothing goes too wrong */
747 dbgp_printk("dbgp: BIOS handoff failed: %08x\n", cap);
748 write_pci_config_byte(ehci_dev.bus, ehci_dev.slot,
749 ehci_dev.func, offset + 2, 0);
750 }
751
752 /* just in case, always disable EHCI SMIs */
753 write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
754 offset + EHCI_USBLEGCTLSTS, 0);
755}
756
Jason Wesseldf6c5162009-08-20 15:39:48 -0500757static int __init ehci_setup(void)
758{
Jason Wessel91777822009-08-20 15:39:53 -0500759 u32 ctrl, portsc, hcs_params;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500760 u32 debug_port, new_debug_port = 0, n_ports;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500761 int ret, i;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500762 int port_map_tried;
763 int playtimes = 3;
764
Jason Wessel093344e2009-08-20 15:39:50 -0500765 early_ehci_bios_handoff();
766
Jason Wesseldf6c5162009-08-20 15:39:48 -0500767try_next_time:
768 port_map_tried = 0;
769
770try_next_port:
771
772 hcs_params = readl(&ehci_caps->hcs_params);
773 debug_port = HCS_DEBUG_PORT(hcs_params);
Jason Wessel91777822009-08-20 15:39:53 -0500774 dbgp_phys_port = debug_port;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500775 n_ports = HCS_N_PORTS(hcs_params);
776
777 dbgp_printk("debug_port: %d\n", debug_port);
778 dbgp_printk("n_ports: %d\n", n_ports);
Jason Wessel91777822009-08-20 15:39:53 -0500779 dbgp_ehci_status("");
Jason Wesseldf6c5162009-08-20 15:39:48 -0500780
781 for (i = 1; i <= n_ports; i++) {
782 portsc = readl(&ehci_regs->port_status[i-1]);
783 dbgp_printk("portstatus%d: %08x\n", i, portsc);
784 }
785
786 if (port_map_tried && (new_debug_port != debug_port)) {
787 if (--playtimes) {
788 set_debug_port(new_debug_port);
789 goto try_next_time;
790 }
791 return -1;
792 }
793
Jason Wessel91777822009-08-20 15:39:53 -0500794 /* Only reset the controller if it is not already in the
795 * configured state */
796 if (!(readl(&ehci_regs->configured_flag) & FLAG_CF)) {
797 if (dbgp_ehci_controller_reset() != 0)
798 return -1;
799 } else {
800 dbgp_ehci_status("ehci skip - already configured");
Jason Wesseldf6c5162009-08-20 15:39:48 -0500801 }
Jason Wesseldf6c5162009-08-20 15:39:48 -0500802
Jan Beulich9fa57802012-09-18 12:23:02 +0100803 ret = _dbgp_external_startup();
Jason Wessel91777822009-08-20 15:39:53 -0500804 if (ret == -EIO)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500805 goto next_debug_port;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500806
Jason Wesseldf6c5162009-08-20 15:39:48 -0500807 if (ret < 0) {
Jason Wessel91777822009-08-20 15:39:53 -0500808 /* Things didn't work so remove my claim */
809 ctrl = readl(&ehci_debug->control);
810 ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
811 writel(ctrl, &ehci_debug->control);
812 return -1;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500813 }
Jason Wesseldf6c5162009-08-20 15:39:48 -0500814 return 0;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500815
816next_debug_port:
817 port_map_tried |= (1<<(debug_port - 1));
818 new_debug_port = ((debug_port-1+1)%n_ports) + 1;
819 if (port_map_tried != ((1<<n_ports) - 1)) {
820 set_debug_port(new_debug_port);
821 goto try_next_port;
822 }
823 if (--playtimes) {
824 set_debug_port(new_debug_port);
825 goto try_next_time;
826 }
827
828 return -1;
829}
830
831int __init early_dbgp_init(char *s)
832{
833 u32 debug_port, bar, offset;
834 u32 bus, slot, func, cap;
835 void __iomem *ehci_bar;
836 u32 dbgp_num;
837 u32 bar_val;
838 char *e;
839 int ret;
840 u8 byte;
841
842 if (!early_pci_allowed())
843 return -1;
844
845 dbgp_num = 0;
846 if (*s)
847 dbgp_num = simple_strtoul(s, &e, 10);
848 dbgp_printk("dbgp_num: %d\n", dbgp_num);
849
850 cap = find_dbgp(dbgp_num, &bus, &slot, &func);
851 if (!cap)
852 return -1;
853
854 dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
855 func);
856
857 debug_port = read_pci_config(bus, slot, func, cap);
858 bar = (debug_port >> 29) & 0x7;
859 bar = (bar * 4) + 0xc;
860 offset = (debug_port >> 16) & 0xfff;
861 dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
862 if (bar != PCI_BASE_ADDRESS_0) {
863 dbgp_printk("only debug ports on bar 1 handled.\n");
864
865 return -1;
866 }
867
868 bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
869 dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
870 if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
871 dbgp_printk("only simple 32bit mmio bars supported\n");
872
873 return -1;
874 }
875
876 /* double check if the mem space is enabled */
877 byte = read_pci_config_byte(bus, slot, func, 0x04);
878 if (!(byte & 0x2)) {
879 byte |= 0x02;
880 write_pci_config_byte(bus, slot, func, 0x04, byte);
881 dbgp_printk("mmio for ehci enabled\n");
882 }
883
884 /*
885 * FIXME I don't have the bar size so just guess PAGE_SIZE is more
886 * than enough. 1K is the biggest I have seen.
887 */
888 set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
889 ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
890 ehci_bar += bar_val & ~PAGE_MASK;
891 dbgp_printk("ehci_bar: %p\n", ehci_bar);
892
893 ehci_caps = ehci_bar;
Jan Anderssonc4301312011-05-03 20:11:57 +0200894 ehci_regs = ehci_bar + EARLY_HC_LENGTH(readl(&ehci_caps->hc_capbase));
Jason Wesseldf6c5162009-08-20 15:39:48 -0500895 ehci_debug = ehci_bar + offset;
896 ehci_dev.bus = bus;
897 ehci_dev.slot = slot;
898 ehci_dev.func = func;
899
900 detect_set_debug_port();
901
902 ret = ehci_setup();
903 if (ret < 0) {
904 dbgp_printk("ehci_setup failed\n");
905 ehci_debug = NULL;
906
907 return -1;
908 }
Jason Wessel91777822009-08-20 15:39:53 -0500909 dbgp_ehci_status("early_init_complete");
Jason Wesseldf6c5162009-08-20 15:39:48 -0500910
911 return 0;
912}
913
914static void early_dbgp_write(struct console *con, const char *str, u32 n)
915{
916 int chunk, ret;
Jason Wessel87a5d152009-08-20 15:39:49 -0500917 char buf[DBGP_MAX_PACKET];
918 int use_cr = 0;
Jason Wessel91777822009-08-20 15:39:53 -0500919 u32 cmd, ctrl;
920 int reset_run = 0;
Jason Wesseldf6c5162009-08-20 15:39:48 -0500921
Jason Wessel91777822009-08-20 15:39:53 -0500922 if (!ehci_debug || dbgp_not_safe)
Jason Wesseldf6c5162009-08-20 15:39:48 -0500923 return;
Jason Wessel91777822009-08-20 15:39:53 -0500924
925 cmd = readl(&ehci_regs->command);
926 if (unlikely(!(cmd & CMD_RUN))) {
927 /* If the ehci controller is not in the run state do extended
928 * checks to see if the acpi or some other initialization also
929 * reset the ehci debug port */
930 ctrl = readl(&ehci_debug->control);
931 if (!(ctrl & DBGP_ENABLED)) {
932 dbgp_not_safe = 1;
Jan Beulich9fa57802012-09-18 12:23:02 +0100933 _dbgp_external_startup();
Jason Wessel91777822009-08-20 15:39:53 -0500934 } else {
935 cmd |= CMD_RUN;
936 writel(cmd, &ehci_regs->command);
937 reset_run = 1;
938 }
939 }
Jason Wesseldf6c5162009-08-20 15:39:48 -0500940 while (n > 0) {
Jason Wessel87a5d152009-08-20 15:39:49 -0500941 for (chunk = 0; chunk < DBGP_MAX_PACKET && n > 0;
942 str++, chunk++, n--) {
943 if (!use_cr && *str == '\n') {
944 use_cr = 1;
945 buf[chunk] = '\r';
946 str--;
947 n++;
948 continue;
949 }
950 if (use_cr)
951 use_cr = 0;
952 buf[chunk] = *str;
953 }
Jason Wessel91777822009-08-20 15:39:53 -0500954 if (chunk > 0) {
955 ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
956 dbgp_endpoint_out, buf, chunk);
957 }
958 }
959 if (unlikely(reset_run)) {
960 cmd = readl(&ehci_regs->command);
961 cmd &= ~CMD_RUN;
962 writel(cmd, &ehci_regs->command);
Jason Wesseldf6c5162009-08-20 15:39:48 -0500963 }
964}
965
966struct console early_dbgp_console = {
967 .name = "earlydbg",
968 .write = early_dbgp_write,
969 .flags = CON_PRINTBUFFER,
970 .index = -1,
971};
Jason Wessel8d053c72009-08-20 15:39:54 -0500972
Jan Beulichbc8d51e2012-11-02 17:09:00 +0000973#if IS_ENABLED(CONFIG_USB)
Jan Beulich9fa57802012-09-18 12:23:02 +0100974int dbgp_reset_prep(struct usb_hcd *hcd)
Jason Wessel8d053c72009-08-20 15:39:54 -0500975{
Jan Beulich9fa57802012-09-18 12:23:02 +0100976 int ret = xen_dbgp_reset_prep(hcd);
Jason Wessel8d053c72009-08-20 15:39:54 -0500977 u32 ctrl;
978
Jan Beulich9fa57802012-09-18 12:23:02 +0100979 if (ret)
980 return ret;
981
Jason Wessel8d053c72009-08-20 15:39:54 -0500982 dbgp_not_safe = 1;
983 if (!ehci_debug)
984 return 0;
985
Jason Wessel4fe1da42010-05-20 21:04:31 -0500986 if ((early_dbgp_console.index != -1 &&
987 !(early_dbgp_console.flags & CON_BOOT)) ||
988 dbgp_kgdb_mode)
Jason Wessel8d053c72009-08-20 15:39:54 -0500989 return 1;
990 /* This means the console is not initialized, or should get
991 * shutdown so as to allow for reuse of the usb device, which
992 * means it is time to shutdown the usb debug port. */
993 ctrl = readl(&ehci_debug->control);
994 if (ctrl & DBGP_ENABLED) {
995 ctrl &= ~(DBGP_CLAIM);
996 writel(ctrl, &ehci_debug->control);
997 }
998 return 0;
999}
1000EXPORT_SYMBOL_GPL(dbgp_reset_prep);
Jason Wessel4fe1da42010-05-20 21:04:31 -05001001
Jan Beulich86effe52012-10-29 16:45:54 +00001002int dbgp_external_startup(struct usb_hcd *hcd)
1003{
1004 return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
1005}
1006EXPORT_SYMBOL_GPL(dbgp_external_startup);
Jan Beulichbc8d51e2012-11-02 17:09:00 +00001007#endif /* USB */
Jan Beulich86effe52012-10-29 16:45:54 +00001008
Jason Wessel4fe1da42010-05-20 21:04:31 -05001009#ifdef CONFIG_KGDB
1010
1011static char kgdbdbgp_buf[DBGP_MAX_PACKET];
1012static int kgdbdbgp_buf_sz;
1013static int kgdbdbgp_buf_idx;
1014static int kgdbdbgp_loop_cnt = DBGP_LOOPS;
1015
1016static int kgdbdbgp_read_char(void)
1017{
1018 int ret;
1019
1020 if (kgdbdbgp_buf_idx < kgdbdbgp_buf_sz) {
1021 char ch = kgdbdbgp_buf[kgdbdbgp_buf_idx++];
1022 return ch;
1023 }
1024
1025 ret = dbgp_bulk_read(USB_DEBUG_DEVNUM, dbgp_endpoint_in,
1026 &kgdbdbgp_buf, DBGP_MAX_PACKET,
1027 kgdbdbgp_loop_cnt);
1028 if (ret <= 0)
1029 return NO_POLL_CHAR;
1030 kgdbdbgp_buf_sz = ret;
1031 kgdbdbgp_buf_idx = 1;
1032 return kgdbdbgp_buf[0];
1033}
1034
1035static void kgdbdbgp_write_char(u8 chr)
1036{
1037 early_dbgp_write(NULL, &chr, 1);
1038}
1039
1040static struct kgdb_io kgdbdbgp_io_ops = {
1041 .name = "kgdbdbgp",
1042 .read_char = kgdbdbgp_read_char,
1043 .write_char = kgdbdbgp_write_char,
1044};
1045
1046static int kgdbdbgp_wait_time;
1047
1048static int __init kgdbdbgp_parse_config(char *str)
1049{
1050 char *ptr;
1051
1052 if (!ehci_debug) {
1053 if (early_dbgp_init(str))
1054 return -1;
1055 }
1056 ptr = strchr(str, ',');
1057 if (ptr) {
1058 ptr++;
1059 kgdbdbgp_wait_time = simple_strtoul(ptr, &ptr, 10);
1060 }
1061 kgdb_register_io_module(&kgdbdbgp_io_ops);
1062 kgdbdbgp_io_ops.is_console = early_dbgp_console.index != -1;
1063
1064 return 0;
1065}
1066early_param("kgdbdbgp", kgdbdbgp_parse_config);
1067
1068static int kgdbdbgp_reader_thread(void *ptr)
1069{
1070 int ret;
1071
1072 while (readl(&ehci_debug->control) & DBGP_ENABLED) {
1073 kgdbdbgp_loop_cnt = 1;
1074 ret = kgdbdbgp_read_char();
1075 kgdbdbgp_loop_cnt = DBGP_LOOPS;
1076 if (ret != NO_POLL_CHAR) {
1077 if (ret == 0x3 || ret == '$') {
1078 if (ret == '$')
1079 kgdbdbgp_buf_idx--;
1080 kgdb_breakpoint();
1081 }
1082 continue;
1083 }
1084 schedule_timeout_interruptible(kgdbdbgp_wait_time * HZ);
1085 }
1086 return 0;
1087}
1088
1089static int __init kgdbdbgp_start_thread(void)
1090{
1091 if (dbgp_kgdb_mode && kgdbdbgp_wait_time)
1092 kthread_run(kgdbdbgp_reader_thread, NULL, "%s", "dbgp");
1093
1094 return 0;
1095}
1096module_init(kgdbdbgp_start_thread);
1097#endif /* CONFIG_KGDB */