David S. Miller | cd9ad58 | 2007-04-26 21:19:23 -0700 | [diff] [blame] | 1 | /* esp_scsi.c: ESP SCSI driver. |
| 2 | * |
| 3 | * Copyright (C) 2007 David S. Miller (davem@davemloft.net) |
| 4 | */ |
| 5 | |
| 6 | #include <linux/kernel.h> |
| 7 | #include <linux/types.h> |
| 8 | #include <linux/slab.h> |
| 9 | #include <linux/delay.h> |
| 10 | #include <linux/list.h> |
| 11 | #include <linux/completion.h> |
| 12 | #include <linux/kallsyms.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/moduleparam.h> |
| 15 | #include <linux/init.h> |
Alexey Dobriyan | e1f2a09 | 2007-04-27 15:19:27 -0700 | [diff] [blame] | 16 | #include <linux/irqreturn.h> |
David S. Miller | cd9ad58 | 2007-04-26 21:19:23 -0700 | [diff] [blame] | 17 | |
| 18 | #include <asm/irq.h> |
| 19 | #include <asm/io.h> |
| 20 | #include <asm/dma.h> |
| 21 | |
| 22 | #include <scsi/scsi.h> |
| 23 | #include <scsi/scsi_host.h> |
| 24 | #include <scsi/scsi_cmnd.h> |
| 25 | #include <scsi/scsi_device.h> |
| 26 | #include <scsi/scsi_tcq.h> |
| 27 | #include <scsi/scsi_dbg.h> |
| 28 | #include <scsi/scsi_transport_spi.h> |
| 29 | |
| 30 | #include "esp_scsi.h" |
| 31 | |
| 32 | #define DRV_MODULE_NAME "esp" |
| 33 | #define PFX DRV_MODULE_NAME ": " |
| 34 | #define DRV_VERSION "2.000" |
| 35 | #define DRV_MODULE_RELDATE "April 19, 2007" |
| 36 | |
| 37 | /* SCSI bus reset settle time in seconds. */ |
| 38 | static int esp_bus_reset_settle = 3; |
| 39 | |
| 40 | static u32 esp_debug; |
| 41 | #define ESP_DEBUG_INTR 0x00000001 |
| 42 | #define ESP_DEBUG_SCSICMD 0x00000002 |
| 43 | #define ESP_DEBUG_RESET 0x00000004 |
| 44 | #define ESP_DEBUG_MSGIN 0x00000008 |
| 45 | #define ESP_DEBUG_MSGOUT 0x00000010 |
| 46 | #define ESP_DEBUG_CMDDONE 0x00000020 |
| 47 | #define ESP_DEBUG_DISCONNECT 0x00000040 |
| 48 | #define ESP_DEBUG_DATASTART 0x00000080 |
| 49 | #define ESP_DEBUG_DATADONE 0x00000100 |
| 50 | #define ESP_DEBUG_RECONNECT 0x00000200 |
| 51 | #define ESP_DEBUG_AUTOSENSE 0x00000400 |
| 52 | |
| 53 | #define esp_log_intr(f, a...) \ |
| 54 | do { if (esp_debug & ESP_DEBUG_INTR) \ |
| 55 | printk(f, ## a); \ |
| 56 | } while (0) |
| 57 | |
| 58 | #define esp_log_reset(f, a...) \ |
| 59 | do { if (esp_debug & ESP_DEBUG_RESET) \ |
| 60 | printk(f, ## a); \ |
| 61 | } while (0) |
| 62 | |
| 63 | #define esp_log_msgin(f, a...) \ |
| 64 | do { if (esp_debug & ESP_DEBUG_MSGIN) \ |
| 65 | printk(f, ## a); \ |
| 66 | } while (0) |
| 67 | |
| 68 | #define esp_log_msgout(f, a...) \ |
| 69 | do { if (esp_debug & ESP_DEBUG_MSGOUT) \ |
| 70 | printk(f, ## a); \ |
| 71 | } while (0) |
| 72 | |
| 73 | #define esp_log_cmddone(f, a...) \ |
| 74 | do { if (esp_debug & ESP_DEBUG_CMDDONE) \ |
| 75 | printk(f, ## a); \ |
| 76 | } while (0) |
| 77 | |
| 78 | #define esp_log_disconnect(f, a...) \ |
| 79 | do { if (esp_debug & ESP_DEBUG_DISCONNECT) \ |
| 80 | printk(f, ## a); \ |
| 81 | } while (0) |
| 82 | |
| 83 | #define esp_log_datastart(f, a...) \ |
| 84 | do { if (esp_debug & ESP_DEBUG_DATASTART) \ |
| 85 | printk(f, ## a); \ |
| 86 | } while (0) |
| 87 | |
| 88 | #define esp_log_datadone(f, a...) \ |
| 89 | do { if (esp_debug & ESP_DEBUG_DATADONE) \ |
| 90 | printk(f, ## a); \ |
| 91 | } while (0) |
| 92 | |
| 93 | #define esp_log_reconnect(f, a...) \ |
| 94 | do { if (esp_debug & ESP_DEBUG_RECONNECT) \ |
| 95 | printk(f, ## a); \ |
| 96 | } while (0) |
| 97 | |
| 98 | #define esp_log_autosense(f, a...) \ |
| 99 | do { if (esp_debug & ESP_DEBUG_AUTOSENSE) \ |
| 100 | printk(f, ## a); \ |
| 101 | } while (0) |
| 102 | |
| 103 | #define esp_read8(REG) esp->ops->esp_read8(esp, REG) |
| 104 | #define esp_write8(VAL,REG) esp->ops->esp_write8(esp, VAL, REG) |
| 105 | |
| 106 | static void esp_log_fill_regs(struct esp *esp, |
| 107 | struct esp_event_ent *p) |
| 108 | { |
| 109 | p->sreg = esp->sreg; |
| 110 | p->seqreg = esp->seqreg; |
| 111 | p->sreg2 = esp->sreg2; |
| 112 | p->ireg = esp->ireg; |
| 113 | p->select_state = esp->select_state; |
| 114 | p->event = esp->event; |
| 115 | } |
| 116 | |
| 117 | void scsi_esp_cmd(struct esp *esp, u8 val) |
| 118 | { |
| 119 | struct esp_event_ent *p; |
| 120 | int idx = esp->esp_event_cur; |
| 121 | |
| 122 | p = &esp->esp_event_log[idx]; |
| 123 | p->type = ESP_EVENT_TYPE_CMD; |
| 124 | p->val = val; |
| 125 | esp_log_fill_regs(esp, p); |
| 126 | |
| 127 | esp->esp_event_cur = (idx + 1) & (ESP_EVENT_LOG_SZ - 1); |
| 128 | |
| 129 | esp_write8(val, ESP_CMD); |
| 130 | } |
| 131 | EXPORT_SYMBOL(scsi_esp_cmd); |
| 132 | |
| 133 | static void esp_event(struct esp *esp, u8 val) |
| 134 | { |
| 135 | struct esp_event_ent *p; |
| 136 | int idx = esp->esp_event_cur; |
| 137 | |
| 138 | p = &esp->esp_event_log[idx]; |
| 139 | p->type = ESP_EVENT_TYPE_EVENT; |
| 140 | p->val = val; |
| 141 | esp_log_fill_regs(esp, p); |
| 142 | |
| 143 | esp->esp_event_cur = (idx + 1) & (ESP_EVENT_LOG_SZ - 1); |
| 144 | |
| 145 | esp->event = val; |
| 146 | } |
| 147 | |
| 148 | static void esp_dump_cmd_log(struct esp *esp) |
| 149 | { |
| 150 | int idx = esp->esp_event_cur; |
| 151 | int stop = idx; |
| 152 | |
| 153 | printk(KERN_INFO PFX "esp%d: Dumping command log\n", |
| 154 | esp->host->unique_id); |
| 155 | do { |
| 156 | struct esp_event_ent *p = &esp->esp_event_log[idx]; |
| 157 | |
| 158 | printk(KERN_INFO PFX "esp%d: ent[%d] %s ", |
| 159 | esp->host->unique_id, idx, |
| 160 | p->type == ESP_EVENT_TYPE_CMD ? "CMD" : "EVENT"); |
| 161 | |
| 162 | printk("val[%02x] sreg[%02x] seqreg[%02x] " |
| 163 | "sreg2[%02x] ireg[%02x] ss[%02x] event[%02x]\n", |
| 164 | p->val, p->sreg, p->seqreg, |
| 165 | p->sreg2, p->ireg, p->select_state, p->event); |
| 166 | |
| 167 | idx = (idx + 1) & (ESP_EVENT_LOG_SZ - 1); |
| 168 | } while (idx != stop); |
| 169 | } |
| 170 | |
| 171 | static void esp_flush_fifo(struct esp *esp) |
| 172 | { |
| 173 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 174 | if (esp->rev == ESP236) { |
| 175 | int lim = 1000; |
| 176 | |
| 177 | while (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES) { |
| 178 | if (--lim == 0) { |
| 179 | printk(KERN_ALERT PFX "esp%d: ESP_FF_BYTES " |
| 180 | "will not clear!\n", |
| 181 | esp->host->unique_id); |
| 182 | break; |
| 183 | } |
| 184 | udelay(1); |
| 185 | } |
| 186 | } |
| 187 | } |
| 188 | |
| 189 | static void hme_read_fifo(struct esp *esp) |
| 190 | { |
| 191 | int fcnt = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES; |
| 192 | int idx = 0; |
| 193 | |
| 194 | while (fcnt--) { |
| 195 | esp->fifo[idx++] = esp_read8(ESP_FDATA); |
| 196 | esp->fifo[idx++] = esp_read8(ESP_FDATA); |
| 197 | } |
| 198 | if (esp->sreg2 & ESP_STAT2_F1BYTE) { |
| 199 | esp_write8(0, ESP_FDATA); |
| 200 | esp->fifo[idx++] = esp_read8(ESP_FDATA); |
| 201 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 202 | } |
| 203 | esp->fifo_cnt = idx; |
| 204 | } |
| 205 | |
| 206 | static void esp_set_all_config3(struct esp *esp, u8 val) |
| 207 | { |
| 208 | int i; |
| 209 | |
| 210 | for (i = 0; i < ESP_MAX_TARGET; i++) |
| 211 | esp->target[i].esp_config3 = val; |
| 212 | } |
| 213 | |
| 214 | /* Reset the ESP chip, _not_ the SCSI bus. */ |
| 215 | static void esp_reset_esp(struct esp *esp) |
| 216 | { |
| 217 | u8 family_code, version; |
| 218 | |
| 219 | /* Now reset the ESP chip */ |
| 220 | scsi_esp_cmd(esp, ESP_CMD_RC); |
| 221 | scsi_esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA); |
| 222 | scsi_esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA); |
| 223 | |
| 224 | /* Reload the configuration registers */ |
| 225 | esp_write8(esp->cfact, ESP_CFACT); |
| 226 | |
| 227 | esp->prev_stp = 0; |
| 228 | esp_write8(esp->prev_stp, ESP_STP); |
| 229 | |
| 230 | esp->prev_soff = 0; |
| 231 | esp_write8(esp->prev_soff, ESP_SOFF); |
| 232 | |
| 233 | esp_write8(esp->neg_defp, ESP_TIMEO); |
| 234 | |
| 235 | /* This is the only point at which it is reliable to read |
| 236 | * the ID-code for a fast ESP chip variants. |
| 237 | */ |
| 238 | esp->max_period = ((35 * esp->ccycle) / 1000); |
| 239 | if (esp->rev == FAST) { |
| 240 | version = esp_read8(ESP_UID); |
| 241 | family_code = (version & 0xf8) >> 3; |
| 242 | if (family_code == 0x02) |
| 243 | esp->rev = FAS236; |
| 244 | else if (family_code == 0x0a) |
| 245 | esp->rev = FASHME; /* Version is usually '5'. */ |
| 246 | else |
| 247 | esp->rev = FAS100A; |
| 248 | esp->min_period = ((4 * esp->ccycle) / 1000); |
| 249 | } else { |
| 250 | esp->min_period = ((5 * esp->ccycle) / 1000); |
| 251 | } |
| 252 | esp->max_period = (esp->max_period + 3)>>2; |
| 253 | esp->min_period = (esp->min_period + 3)>>2; |
| 254 | |
| 255 | esp_write8(esp->config1, ESP_CFG1); |
| 256 | switch (esp->rev) { |
| 257 | case ESP100: |
| 258 | /* nothing to do */ |
| 259 | break; |
| 260 | |
| 261 | case ESP100A: |
| 262 | esp_write8(esp->config2, ESP_CFG2); |
| 263 | break; |
| 264 | |
| 265 | case ESP236: |
| 266 | /* Slow 236 */ |
| 267 | esp_write8(esp->config2, ESP_CFG2); |
| 268 | esp->prev_cfg3 = esp->target[0].esp_config3; |
| 269 | esp_write8(esp->prev_cfg3, ESP_CFG3); |
| 270 | break; |
| 271 | |
| 272 | case FASHME: |
| 273 | esp->config2 |= (ESP_CONFIG2_HME32 | ESP_CONFIG2_HMEFENAB); |
| 274 | /* fallthrough... */ |
| 275 | |
| 276 | case FAS236: |
| 277 | /* Fast 236 or HME */ |
| 278 | esp_write8(esp->config2, ESP_CFG2); |
| 279 | if (esp->rev == FASHME) { |
| 280 | u8 cfg3 = esp->target[0].esp_config3; |
| 281 | |
| 282 | cfg3 |= ESP_CONFIG3_FCLOCK | ESP_CONFIG3_OBPUSH; |
| 283 | if (esp->scsi_id >= 8) |
| 284 | cfg3 |= ESP_CONFIG3_IDBIT3; |
| 285 | esp_set_all_config3(esp, cfg3); |
| 286 | } else { |
| 287 | u32 cfg3 = esp->target[0].esp_config3; |
| 288 | |
| 289 | cfg3 |= ESP_CONFIG3_FCLK; |
| 290 | esp_set_all_config3(esp, cfg3); |
| 291 | } |
| 292 | esp->prev_cfg3 = esp->target[0].esp_config3; |
| 293 | esp_write8(esp->prev_cfg3, ESP_CFG3); |
| 294 | if (esp->rev == FASHME) { |
| 295 | esp->radelay = 80; |
| 296 | } else { |
| 297 | if (esp->flags & ESP_FLAG_DIFFERENTIAL) |
| 298 | esp->radelay = 0; |
| 299 | else |
| 300 | esp->radelay = 96; |
| 301 | } |
| 302 | break; |
| 303 | |
| 304 | case FAS100A: |
| 305 | /* Fast 100a */ |
| 306 | esp_write8(esp->config2, ESP_CFG2); |
| 307 | esp_set_all_config3(esp, |
| 308 | (esp->target[0].esp_config3 | |
| 309 | ESP_CONFIG3_FCLOCK)); |
| 310 | esp->prev_cfg3 = esp->target[0].esp_config3; |
| 311 | esp_write8(esp->prev_cfg3, ESP_CFG3); |
| 312 | esp->radelay = 32; |
| 313 | break; |
| 314 | |
| 315 | default: |
| 316 | break; |
| 317 | } |
| 318 | |
| 319 | /* Eat any bitrot in the chip */ |
| 320 | esp_read8(ESP_INTRPT); |
| 321 | udelay(100); |
| 322 | } |
| 323 | |
| 324 | static void esp_map_dma(struct esp *esp, struct scsi_cmnd *cmd) |
| 325 | { |
| 326 | struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd); |
| 327 | struct scatterlist *sg = cmd->request_buffer; |
| 328 | int dir = cmd->sc_data_direction; |
| 329 | int total, i; |
| 330 | |
| 331 | if (dir == DMA_NONE) |
| 332 | return; |
| 333 | |
| 334 | BUG_ON(cmd->use_sg == 0); |
| 335 | |
| 336 | spriv->u.num_sg = esp->ops->map_sg(esp, sg, |
| 337 | cmd->use_sg, dir); |
| 338 | spriv->cur_residue = sg_dma_len(sg); |
| 339 | spriv->cur_sg = sg; |
| 340 | |
| 341 | total = 0; |
| 342 | for (i = 0; i < spriv->u.num_sg; i++) |
| 343 | total += sg_dma_len(&sg[i]); |
| 344 | spriv->tot_residue = total; |
| 345 | } |
| 346 | |
| 347 | static dma_addr_t esp_cur_dma_addr(struct esp_cmd_entry *ent, |
| 348 | struct scsi_cmnd *cmd) |
| 349 | { |
| 350 | struct esp_cmd_priv *p = ESP_CMD_PRIV(cmd); |
| 351 | |
| 352 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 353 | return ent->sense_dma + |
| 354 | (ent->sense_ptr - cmd->sense_buffer); |
| 355 | } |
| 356 | |
| 357 | return sg_dma_address(p->cur_sg) + |
| 358 | (sg_dma_len(p->cur_sg) - |
| 359 | p->cur_residue); |
| 360 | } |
| 361 | |
| 362 | static unsigned int esp_cur_dma_len(struct esp_cmd_entry *ent, |
| 363 | struct scsi_cmnd *cmd) |
| 364 | { |
| 365 | struct esp_cmd_priv *p = ESP_CMD_PRIV(cmd); |
| 366 | |
| 367 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 368 | return SCSI_SENSE_BUFFERSIZE - |
| 369 | (ent->sense_ptr - cmd->sense_buffer); |
| 370 | } |
| 371 | return p->cur_residue; |
| 372 | } |
| 373 | |
| 374 | static void esp_advance_dma(struct esp *esp, struct esp_cmd_entry *ent, |
| 375 | struct scsi_cmnd *cmd, unsigned int len) |
| 376 | { |
| 377 | struct esp_cmd_priv *p = ESP_CMD_PRIV(cmd); |
| 378 | |
| 379 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 380 | ent->sense_ptr += len; |
| 381 | return; |
| 382 | } |
| 383 | |
| 384 | p->cur_residue -= len; |
| 385 | p->tot_residue -= len; |
| 386 | if (p->cur_residue < 0 || p->tot_residue < 0) { |
| 387 | printk(KERN_ERR PFX "esp%d: Data transfer overflow.\n", |
| 388 | esp->host->unique_id); |
| 389 | printk(KERN_ERR PFX "esp%d: cur_residue[%d] tot_residue[%d] " |
| 390 | "len[%u]\n", |
| 391 | esp->host->unique_id, |
| 392 | p->cur_residue, p->tot_residue, len); |
| 393 | p->cur_residue = 0; |
| 394 | p->tot_residue = 0; |
| 395 | } |
| 396 | if (!p->cur_residue && p->tot_residue) { |
| 397 | p->cur_sg++; |
| 398 | p->cur_residue = sg_dma_len(p->cur_sg); |
| 399 | } |
| 400 | } |
| 401 | |
| 402 | static void esp_unmap_dma(struct esp *esp, struct scsi_cmnd *cmd) |
| 403 | { |
| 404 | struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd); |
| 405 | int dir = cmd->sc_data_direction; |
| 406 | |
| 407 | if (dir == DMA_NONE) |
| 408 | return; |
| 409 | |
| 410 | esp->ops->unmap_sg(esp, cmd->request_buffer, |
| 411 | spriv->u.num_sg, dir); |
| 412 | } |
| 413 | |
| 414 | static void esp_save_pointers(struct esp *esp, struct esp_cmd_entry *ent) |
| 415 | { |
| 416 | struct scsi_cmnd *cmd = ent->cmd; |
| 417 | struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd); |
| 418 | |
| 419 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 420 | ent->saved_sense_ptr = ent->sense_ptr; |
| 421 | return; |
| 422 | } |
| 423 | ent->saved_cur_residue = spriv->cur_residue; |
| 424 | ent->saved_cur_sg = spriv->cur_sg; |
| 425 | ent->saved_tot_residue = spriv->tot_residue; |
| 426 | } |
| 427 | |
| 428 | static void esp_restore_pointers(struct esp *esp, struct esp_cmd_entry *ent) |
| 429 | { |
| 430 | struct scsi_cmnd *cmd = ent->cmd; |
| 431 | struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd); |
| 432 | |
| 433 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 434 | ent->sense_ptr = ent->saved_sense_ptr; |
| 435 | return; |
| 436 | } |
| 437 | spriv->cur_residue = ent->saved_cur_residue; |
| 438 | spriv->cur_sg = ent->saved_cur_sg; |
| 439 | spriv->tot_residue = ent->saved_tot_residue; |
| 440 | } |
| 441 | |
| 442 | static void esp_check_command_len(struct esp *esp, struct scsi_cmnd *cmd) |
| 443 | { |
| 444 | if (cmd->cmd_len == 6 || |
| 445 | cmd->cmd_len == 10 || |
| 446 | cmd->cmd_len == 12) { |
| 447 | esp->flags &= ~ESP_FLAG_DOING_SLOWCMD; |
| 448 | } else { |
| 449 | esp->flags |= ESP_FLAG_DOING_SLOWCMD; |
| 450 | } |
| 451 | } |
| 452 | |
| 453 | static void esp_write_tgt_config3(struct esp *esp, int tgt) |
| 454 | { |
| 455 | if (esp->rev > ESP100A) { |
| 456 | u8 val = esp->target[tgt].esp_config3; |
| 457 | |
| 458 | if (val != esp->prev_cfg3) { |
| 459 | esp->prev_cfg3 = val; |
| 460 | esp_write8(val, ESP_CFG3); |
| 461 | } |
| 462 | } |
| 463 | } |
| 464 | |
| 465 | static void esp_write_tgt_sync(struct esp *esp, int tgt) |
| 466 | { |
| 467 | u8 off = esp->target[tgt].esp_offset; |
| 468 | u8 per = esp->target[tgt].esp_period; |
| 469 | |
| 470 | if (off != esp->prev_soff) { |
| 471 | esp->prev_soff = off; |
| 472 | esp_write8(off, ESP_SOFF); |
| 473 | } |
| 474 | if (per != esp->prev_stp) { |
| 475 | esp->prev_stp = per; |
| 476 | esp_write8(per, ESP_STP); |
| 477 | } |
| 478 | } |
| 479 | |
| 480 | static u32 esp_dma_length_limit(struct esp *esp, u32 dma_addr, u32 dma_len) |
| 481 | { |
| 482 | if (esp->rev == FASHME) { |
| 483 | /* Arbitrary segment boundaries, 24-bit counts. */ |
| 484 | if (dma_len > (1U << 24)) |
| 485 | dma_len = (1U << 24); |
| 486 | } else { |
| 487 | u32 base, end; |
| 488 | |
| 489 | /* ESP chip limits other variants by 16-bits of transfer |
| 490 | * count. Actually on FAS100A and FAS236 we could get |
| 491 | * 24-bits of transfer count by enabling ESP_CONFIG2_FENAB |
| 492 | * in the ESP_CFG2 register but that causes other unwanted |
| 493 | * changes so we don't use it currently. |
| 494 | */ |
| 495 | if (dma_len > (1U << 16)) |
| 496 | dma_len = (1U << 16); |
| 497 | |
| 498 | /* All of the DMA variants hooked up to these chips |
| 499 | * cannot handle crossing a 24-bit address boundary. |
| 500 | */ |
| 501 | base = dma_addr & ((1U << 24) - 1U); |
| 502 | end = base + dma_len; |
| 503 | if (end > (1U << 24)) |
| 504 | end = (1U <<24); |
| 505 | dma_len = end - base; |
| 506 | } |
| 507 | return dma_len; |
| 508 | } |
| 509 | |
| 510 | static int esp_need_to_nego_wide(struct esp_target_data *tp) |
| 511 | { |
| 512 | struct scsi_target *target = tp->starget; |
| 513 | |
| 514 | return spi_width(target) != tp->nego_goal_width; |
| 515 | } |
| 516 | |
| 517 | static int esp_need_to_nego_sync(struct esp_target_data *tp) |
| 518 | { |
| 519 | struct scsi_target *target = tp->starget; |
| 520 | |
| 521 | /* When offset is zero, period is "don't care". */ |
| 522 | if (!spi_offset(target) && !tp->nego_goal_offset) |
| 523 | return 0; |
| 524 | |
| 525 | if (spi_offset(target) == tp->nego_goal_offset && |
| 526 | spi_period(target) == tp->nego_goal_period) |
| 527 | return 0; |
| 528 | |
| 529 | return 1; |
| 530 | } |
| 531 | |
| 532 | static int esp_alloc_lun_tag(struct esp_cmd_entry *ent, |
| 533 | struct esp_lun_data *lp) |
| 534 | { |
| 535 | if (!ent->tag[0]) { |
| 536 | /* Non-tagged, slot already taken? */ |
| 537 | if (lp->non_tagged_cmd) |
| 538 | return -EBUSY; |
| 539 | |
| 540 | if (lp->hold) { |
| 541 | /* We are being held by active tagged |
| 542 | * commands. |
| 543 | */ |
| 544 | if (lp->num_tagged) |
| 545 | return -EBUSY; |
| 546 | |
| 547 | /* Tagged commands completed, we can unplug |
| 548 | * the queue and run this untagged command. |
| 549 | */ |
| 550 | lp->hold = 0; |
| 551 | } else if (lp->num_tagged) { |
| 552 | /* Plug the queue until num_tagged decreases |
| 553 | * to zero in esp_free_lun_tag. |
| 554 | */ |
| 555 | lp->hold = 1; |
| 556 | return -EBUSY; |
| 557 | } |
| 558 | |
| 559 | lp->non_tagged_cmd = ent; |
| 560 | return 0; |
| 561 | } else { |
| 562 | /* Tagged command, see if blocked by a |
| 563 | * non-tagged one. |
| 564 | */ |
| 565 | if (lp->non_tagged_cmd || lp->hold) |
| 566 | return -EBUSY; |
| 567 | } |
| 568 | |
| 569 | BUG_ON(lp->tagged_cmds[ent->tag[1]]); |
| 570 | |
| 571 | lp->tagged_cmds[ent->tag[1]] = ent; |
| 572 | lp->num_tagged++; |
| 573 | |
| 574 | return 0; |
| 575 | } |
| 576 | |
| 577 | static void esp_free_lun_tag(struct esp_cmd_entry *ent, |
| 578 | struct esp_lun_data *lp) |
| 579 | { |
| 580 | if (ent->tag[0]) { |
| 581 | BUG_ON(lp->tagged_cmds[ent->tag[1]] != ent); |
| 582 | lp->tagged_cmds[ent->tag[1]] = NULL; |
| 583 | lp->num_tagged--; |
| 584 | } else { |
| 585 | BUG_ON(lp->non_tagged_cmd != ent); |
| 586 | lp->non_tagged_cmd = NULL; |
| 587 | } |
| 588 | } |
| 589 | |
| 590 | /* When a contingent allegiance conditon is created, we force feed a |
| 591 | * REQUEST_SENSE command to the device to fetch the sense data. I |
| 592 | * tried many other schemes, relying on the scsi error handling layer |
| 593 | * to send out the REQUEST_SENSE automatically, but this was difficult |
| 594 | * to get right especially in the presence of applications like smartd |
| 595 | * which use SG_IO to send out their own REQUEST_SENSE commands. |
| 596 | */ |
| 597 | static void esp_autosense(struct esp *esp, struct esp_cmd_entry *ent) |
| 598 | { |
| 599 | struct scsi_cmnd *cmd = ent->cmd; |
| 600 | struct scsi_device *dev = cmd->device; |
| 601 | int tgt, lun; |
| 602 | u8 *p, val; |
| 603 | |
| 604 | tgt = dev->id; |
| 605 | lun = dev->lun; |
| 606 | |
| 607 | |
| 608 | if (!ent->sense_ptr) { |
| 609 | esp_log_autosense("esp%d: Doing auto-sense for " |
| 610 | "tgt[%d] lun[%d]\n", |
| 611 | esp->host->unique_id, tgt, lun); |
| 612 | |
| 613 | ent->sense_ptr = cmd->sense_buffer; |
| 614 | ent->sense_dma = esp->ops->map_single(esp, |
| 615 | ent->sense_ptr, |
| 616 | SCSI_SENSE_BUFFERSIZE, |
| 617 | DMA_FROM_DEVICE); |
| 618 | } |
| 619 | ent->saved_sense_ptr = ent->sense_ptr; |
| 620 | |
| 621 | esp->active_cmd = ent; |
| 622 | |
| 623 | p = esp->command_block; |
| 624 | esp->msg_out_len = 0; |
| 625 | |
| 626 | *p++ = IDENTIFY(0, lun); |
| 627 | *p++ = REQUEST_SENSE; |
| 628 | *p++ = ((dev->scsi_level <= SCSI_2) ? |
| 629 | (lun << 5) : 0); |
| 630 | *p++ = 0; |
| 631 | *p++ = 0; |
| 632 | *p++ = SCSI_SENSE_BUFFERSIZE; |
| 633 | *p++ = 0; |
| 634 | |
| 635 | esp->select_state = ESP_SELECT_BASIC; |
| 636 | |
| 637 | val = tgt; |
| 638 | if (esp->rev == FASHME) |
| 639 | val |= ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT; |
| 640 | esp_write8(val, ESP_BUSID); |
| 641 | |
| 642 | esp_write_tgt_sync(esp, tgt); |
| 643 | esp_write_tgt_config3(esp, tgt); |
| 644 | |
| 645 | val = (p - esp->command_block); |
| 646 | |
| 647 | if (esp->rev == FASHME) |
| 648 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 649 | esp->ops->send_dma_cmd(esp, esp->command_block_dma, |
| 650 | val, 16, 0, ESP_CMD_DMA | ESP_CMD_SELA); |
| 651 | } |
| 652 | |
| 653 | static struct esp_cmd_entry *find_and_prep_issuable_command(struct esp *esp) |
| 654 | { |
| 655 | struct esp_cmd_entry *ent; |
| 656 | |
| 657 | list_for_each_entry(ent, &esp->queued_cmds, list) { |
| 658 | struct scsi_cmnd *cmd = ent->cmd; |
| 659 | struct scsi_device *dev = cmd->device; |
| 660 | struct esp_lun_data *lp = dev->hostdata; |
| 661 | |
| 662 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 663 | ent->tag[0] = 0; |
| 664 | ent->tag[1] = 0; |
| 665 | return ent; |
| 666 | } |
| 667 | |
| 668 | if (!scsi_populate_tag_msg(cmd, &ent->tag[0])) { |
| 669 | ent->tag[0] = 0; |
| 670 | ent->tag[1] = 0; |
| 671 | } |
| 672 | |
| 673 | if (esp_alloc_lun_tag(ent, lp) < 0) |
| 674 | continue; |
| 675 | |
| 676 | return ent; |
| 677 | } |
| 678 | |
| 679 | return NULL; |
| 680 | } |
| 681 | |
| 682 | static void esp_maybe_execute_command(struct esp *esp) |
| 683 | { |
| 684 | struct esp_target_data *tp; |
| 685 | struct esp_lun_data *lp; |
| 686 | struct scsi_device *dev; |
| 687 | struct scsi_cmnd *cmd; |
| 688 | struct esp_cmd_entry *ent; |
| 689 | int tgt, lun, i; |
| 690 | u32 val, start_cmd; |
| 691 | u8 *p; |
| 692 | |
| 693 | if (esp->active_cmd || |
| 694 | (esp->flags & ESP_FLAG_RESETTING)) |
| 695 | return; |
| 696 | |
| 697 | ent = find_and_prep_issuable_command(esp); |
| 698 | if (!ent) |
| 699 | return; |
| 700 | |
| 701 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 702 | esp_autosense(esp, ent); |
| 703 | return; |
| 704 | } |
| 705 | |
| 706 | cmd = ent->cmd; |
| 707 | dev = cmd->device; |
| 708 | tgt = dev->id; |
| 709 | lun = dev->lun; |
| 710 | tp = &esp->target[tgt]; |
| 711 | lp = dev->hostdata; |
| 712 | |
| 713 | list_del(&ent->list); |
| 714 | list_add(&ent->list, &esp->active_cmds); |
| 715 | |
| 716 | esp->active_cmd = ent; |
| 717 | |
| 718 | esp_map_dma(esp, cmd); |
| 719 | esp_save_pointers(esp, ent); |
| 720 | |
| 721 | esp_check_command_len(esp, cmd); |
| 722 | |
| 723 | p = esp->command_block; |
| 724 | |
| 725 | esp->msg_out_len = 0; |
| 726 | if (tp->flags & ESP_TGT_CHECK_NEGO) { |
| 727 | /* Need to negotiate. If the target is broken |
| 728 | * go for synchronous transfers and non-wide. |
| 729 | */ |
| 730 | if (tp->flags & ESP_TGT_BROKEN) { |
| 731 | tp->flags &= ~ESP_TGT_DISCONNECT; |
| 732 | tp->nego_goal_period = 0; |
| 733 | tp->nego_goal_offset = 0; |
| 734 | tp->nego_goal_width = 0; |
| 735 | tp->nego_goal_tags = 0; |
| 736 | } |
| 737 | |
| 738 | /* If the settings are not changing, skip this. */ |
| 739 | if (spi_width(tp->starget) == tp->nego_goal_width && |
| 740 | spi_period(tp->starget) == tp->nego_goal_period && |
| 741 | spi_offset(tp->starget) == tp->nego_goal_offset) { |
| 742 | tp->flags &= ~ESP_TGT_CHECK_NEGO; |
| 743 | goto build_identify; |
| 744 | } |
| 745 | |
| 746 | if (esp->rev == FASHME && esp_need_to_nego_wide(tp)) { |
| 747 | esp->msg_out_len = |
| 748 | spi_populate_width_msg(&esp->msg_out[0], |
| 749 | (tp->nego_goal_width ? |
| 750 | 1 : 0)); |
| 751 | tp->flags |= ESP_TGT_NEGO_WIDE; |
| 752 | } else if (esp_need_to_nego_sync(tp)) { |
| 753 | esp->msg_out_len = |
| 754 | spi_populate_sync_msg(&esp->msg_out[0], |
| 755 | tp->nego_goal_period, |
| 756 | tp->nego_goal_offset); |
| 757 | tp->flags |= ESP_TGT_NEGO_SYNC; |
| 758 | } else { |
| 759 | tp->flags &= ~ESP_TGT_CHECK_NEGO; |
| 760 | } |
| 761 | |
| 762 | /* Process it like a slow command. */ |
| 763 | if (tp->flags & (ESP_TGT_NEGO_WIDE | ESP_TGT_NEGO_SYNC)) |
| 764 | esp->flags |= ESP_FLAG_DOING_SLOWCMD; |
| 765 | } |
| 766 | |
| 767 | build_identify: |
| 768 | /* If we don't have a lun-data struct yet, we're probing |
| 769 | * so do not disconnect. Also, do not disconnect unless |
| 770 | * we have a tag on this command. |
| 771 | */ |
| 772 | if (lp && (tp->flags & ESP_TGT_DISCONNECT) && ent->tag[0]) |
| 773 | *p++ = IDENTIFY(1, lun); |
| 774 | else |
| 775 | *p++ = IDENTIFY(0, lun); |
| 776 | |
| 777 | if (ent->tag[0] && esp->rev == ESP100) { |
| 778 | /* ESP100 lacks select w/atn3 command, use select |
| 779 | * and stop instead. |
| 780 | */ |
| 781 | esp->flags |= ESP_FLAG_DOING_SLOWCMD; |
| 782 | } |
| 783 | |
| 784 | if (!(esp->flags & ESP_FLAG_DOING_SLOWCMD)) { |
| 785 | start_cmd = ESP_CMD_DMA | ESP_CMD_SELA; |
| 786 | if (ent->tag[0]) { |
| 787 | *p++ = ent->tag[0]; |
| 788 | *p++ = ent->tag[1]; |
| 789 | |
| 790 | start_cmd = ESP_CMD_DMA | ESP_CMD_SA3; |
| 791 | } |
| 792 | |
| 793 | for (i = 0; i < cmd->cmd_len; i++) |
| 794 | *p++ = cmd->cmnd[i]; |
| 795 | |
| 796 | esp->select_state = ESP_SELECT_BASIC; |
| 797 | } else { |
| 798 | esp->cmd_bytes_left = cmd->cmd_len; |
| 799 | esp->cmd_bytes_ptr = &cmd->cmnd[0]; |
| 800 | |
| 801 | if (ent->tag[0]) { |
| 802 | for (i = esp->msg_out_len - 1; |
| 803 | i >= 0; i--) |
| 804 | esp->msg_out[i + 2] = esp->msg_out[i]; |
| 805 | esp->msg_out[0] = ent->tag[0]; |
| 806 | esp->msg_out[1] = ent->tag[1]; |
| 807 | esp->msg_out_len += 2; |
| 808 | } |
| 809 | |
| 810 | start_cmd = ESP_CMD_DMA | ESP_CMD_SELAS; |
| 811 | esp->select_state = ESP_SELECT_MSGOUT; |
| 812 | } |
| 813 | val = tgt; |
| 814 | if (esp->rev == FASHME) |
| 815 | val |= ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT; |
| 816 | esp_write8(val, ESP_BUSID); |
| 817 | |
| 818 | esp_write_tgt_sync(esp, tgt); |
| 819 | esp_write_tgt_config3(esp, tgt); |
| 820 | |
| 821 | val = (p - esp->command_block); |
| 822 | |
| 823 | if (esp_debug & ESP_DEBUG_SCSICMD) { |
| 824 | printk("ESP: tgt[%d] lun[%d] scsi_cmd [ ", tgt, lun); |
| 825 | for (i = 0; i < cmd->cmd_len; i++) |
| 826 | printk("%02x ", cmd->cmnd[i]); |
| 827 | printk("]\n"); |
| 828 | } |
| 829 | |
| 830 | if (esp->rev == FASHME) |
| 831 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 832 | esp->ops->send_dma_cmd(esp, esp->command_block_dma, |
| 833 | val, 16, 0, start_cmd); |
| 834 | } |
| 835 | |
| 836 | static struct esp_cmd_entry *esp_get_ent(struct esp *esp) |
| 837 | { |
| 838 | struct list_head *head = &esp->esp_cmd_pool; |
| 839 | struct esp_cmd_entry *ret; |
| 840 | |
| 841 | if (list_empty(head)) { |
| 842 | ret = kzalloc(sizeof(struct esp_cmd_entry), GFP_ATOMIC); |
| 843 | } else { |
| 844 | ret = list_entry(head->next, struct esp_cmd_entry, list); |
| 845 | list_del(&ret->list); |
| 846 | memset(ret, 0, sizeof(*ret)); |
| 847 | } |
| 848 | return ret; |
| 849 | } |
| 850 | |
| 851 | static void esp_put_ent(struct esp *esp, struct esp_cmd_entry *ent) |
| 852 | { |
| 853 | list_add(&ent->list, &esp->esp_cmd_pool); |
| 854 | } |
| 855 | |
| 856 | static void esp_cmd_is_done(struct esp *esp, struct esp_cmd_entry *ent, |
| 857 | struct scsi_cmnd *cmd, unsigned int result) |
| 858 | { |
| 859 | struct scsi_device *dev = cmd->device; |
| 860 | int tgt = dev->id; |
| 861 | int lun = dev->lun; |
| 862 | |
| 863 | esp->active_cmd = NULL; |
| 864 | esp_unmap_dma(esp, cmd); |
| 865 | esp_free_lun_tag(ent, dev->hostdata); |
| 866 | cmd->result = result; |
| 867 | |
| 868 | if (ent->eh_done) { |
| 869 | complete(ent->eh_done); |
| 870 | ent->eh_done = NULL; |
| 871 | } |
| 872 | |
| 873 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 874 | esp->ops->unmap_single(esp, ent->sense_dma, |
| 875 | SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); |
| 876 | ent->sense_ptr = NULL; |
| 877 | |
| 878 | /* Restore the message/status bytes to what we actually |
| 879 | * saw originally. Also, report that we are providing |
| 880 | * the sense data. |
| 881 | */ |
| 882 | cmd->result = ((DRIVER_SENSE << 24) | |
| 883 | (DID_OK << 16) | |
| 884 | (COMMAND_COMPLETE << 8) | |
| 885 | (SAM_STAT_CHECK_CONDITION << 0)); |
| 886 | |
| 887 | ent->flags &= ~ESP_CMD_FLAG_AUTOSENSE; |
| 888 | if (esp_debug & ESP_DEBUG_AUTOSENSE) { |
| 889 | int i; |
| 890 | |
| 891 | printk("esp%d: tgt[%d] lun[%d] AUTO SENSE[ ", |
| 892 | esp->host->unique_id, tgt, lun); |
| 893 | for (i = 0; i < 18; i++) |
| 894 | printk("%02x ", cmd->sense_buffer[i]); |
| 895 | printk("]\n"); |
| 896 | } |
| 897 | } |
| 898 | |
| 899 | cmd->scsi_done(cmd); |
| 900 | |
| 901 | list_del(&ent->list); |
| 902 | esp_put_ent(esp, ent); |
| 903 | |
| 904 | esp_maybe_execute_command(esp); |
| 905 | } |
| 906 | |
| 907 | static unsigned int compose_result(unsigned int status, unsigned int message, |
| 908 | unsigned int driver_code) |
| 909 | { |
| 910 | return (status | (message << 8) | (driver_code << 16)); |
| 911 | } |
| 912 | |
| 913 | static void esp_event_queue_full(struct esp *esp, struct esp_cmd_entry *ent) |
| 914 | { |
| 915 | struct scsi_device *dev = ent->cmd->device; |
| 916 | struct esp_lun_data *lp = dev->hostdata; |
| 917 | |
| 918 | scsi_track_queue_full(dev, lp->num_tagged - 1); |
| 919 | } |
| 920 | |
| 921 | static int esp_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) |
| 922 | { |
| 923 | struct scsi_device *dev = cmd->device; |
| 924 | struct esp *esp = host_to_esp(dev->host); |
| 925 | struct esp_cmd_priv *spriv; |
| 926 | struct esp_cmd_entry *ent; |
| 927 | |
| 928 | ent = esp_get_ent(esp); |
| 929 | if (!ent) |
| 930 | return SCSI_MLQUEUE_HOST_BUSY; |
| 931 | |
| 932 | ent->cmd = cmd; |
| 933 | |
| 934 | cmd->scsi_done = done; |
| 935 | |
| 936 | spriv = ESP_CMD_PRIV(cmd); |
| 937 | spriv->u.dma_addr = ~(dma_addr_t)0x0; |
| 938 | |
| 939 | list_add_tail(&ent->list, &esp->queued_cmds); |
| 940 | |
| 941 | esp_maybe_execute_command(esp); |
| 942 | |
| 943 | return 0; |
| 944 | } |
| 945 | |
| 946 | static int esp_check_gross_error(struct esp *esp) |
| 947 | { |
| 948 | if (esp->sreg & ESP_STAT_SPAM) { |
| 949 | /* Gross Error, could be one of: |
| 950 | * - top of fifo overwritten |
| 951 | * - top of command register overwritten |
| 952 | * - DMA programmed with wrong direction |
| 953 | * - improper phase change |
| 954 | */ |
| 955 | printk(KERN_ERR PFX "esp%d: Gross error sreg[%02x]\n", |
| 956 | esp->host->unique_id, esp->sreg); |
| 957 | /* XXX Reset the chip. XXX */ |
| 958 | return 1; |
| 959 | } |
| 960 | return 0; |
| 961 | } |
| 962 | |
| 963 | static int esp_check_spur_intr(struct esp *esp) |
| 964 | { |
| 965 | switch (esp->rev) { |
| 966 | case ESP100: |
| 967 | case ESP100A: |
| 968 | /* The interrupt pending bit of the status register cannot |
| 969 | * be trusted on these revisions. |
| 970 | */ |
| 971 | esp->sreg &= ~ESP_STAT_INTR; |
| 972 | break; |
| 973 | |
| 974 | default: |
| 975 | if (!(esp->sreg & ESP_STAT_INTR)) { |
| 976 | esp->ireg = esp_read8(ESP_INTRPT); |
| 977 | if (esp->ireg & ESP_INTR_SR) |
| 978 | return 1; |
| 979 | |
| 980 | /* If the DMA is indicating interrupt pending and the |
| 981 | * ESP is not, the only possibility is a DMA error. |
| 982 | */ |
| 983 | if (!esp->ops->dma_error(esp)) { |
| 984 | printk(KERN_ERR PFX "esp%d: Spurious irq, " |
| 985 | "sreg=%x.\n", |
| 986 | esp->host->unique_id, esp->sreg); |
| 987 | return -1; |
| 988 | } |
| 989 | |
| 990 | printk(KERN_ERR PFX "esp%d: DMA error\n", |
| 991 | esp->host->unique_id); |
| 992 | |
| 993 | /* XXX Reset the chip. XXX */ |
| 994 | return -1; |
| 995 | } |
| 996 | break; |
| 997 | } |
| 998 | |
| 999 | return 0; |
| 1000 | } |
| 1001 | |
| 1002 | static void esp_schedule_reset(struct esp *esp) |
| 1003 | { |
| 1004 | esp_log_reset("ESP: esp_schedule_reset() from %p\n", |
| 1005 | __builtin_return_address(0)); |
| 1006 | esp->flags |= ESP_FLAG_RESETTING; |
| 1007 | esp_event(esp, ESP_EVENT_RESET); |
| 1008 | } |
| 1009 | |
| 1010 | /* In order to avoid having to add a special half-reconnected state |
| 1011 | * into the driver we just sit here and poll through the rest of |
| 1012 | * the reselection process to get the tag message bytes. |
| 1013 | */ |
| 1014 | static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp, |
| 1015 | struct esp_lun_data *lp) |
| 1016 | { |
| 1017 | struct esp_cmd_entry *ent; |
| 1018 | int i; |
| 1019 | |
| 1020 | if (!lp->num_tagged) { |
| 1021 | printk(KERN_ERR PFX "esp%d: Reconnect w/num_tagged==0\n", |
| 1022 | esp->host->unique_id); |
| 1023 | return NULL; |
| 1024 | } |
| 1025 | |
| 1026 | esp_log_reconnect("ESP: reconnect tag, "); |
| 1027 | |
| 1028 | for (i = 0; i < ESP_QUICKIRQ_LIMIT; i++) { |
| 1029 | if (esp->ops->irq_pending(esp)) |
| 1030 | break; |
| 1031 | } |
| 1032 | if (i == ESP_QUICKIRQ_LIMIT) { |
| 1033 | printk(KERN_ERR PFX "esp%d: Reconnect IRQ1 timeout\n", |
| 1034 | esp->host->unique_id); |
| 1035 | return NULL; |
| 1036 | } |
| 1037 | |
| 1038 | esp->sreg = esp_read8(ESP_STATUS); |
| 1039 | esp->ireg = esp_read8(ESP_INTRPT); |
| 1040 | |
| 1041 | esp_log_reconnect("IRQ(%d:%x:%x), ", |
| 1042 | i, esp->ireg, esp->sreg); |
| 1043 | |
| 1044 | if (esp->ireg & ESP_INTR_DC) { |
| 1045 | printk(KERN_ERR PFX "esp%d: Reconnect, got disconnect.\n", |
| 1046 | esp->host->unique_id); |
| 1047 | return NULL; |
| 1048 | } |
| 1049 | |
| 1050 | if ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP) { |
| 1051 | printk(KERN_ERR PFX "esp%d: Reconnect, not MIP sreg[%02x].\n", |
| 1052 | esp->host->unique_id, esp->sreg); |
| 1053 | return NULL; |
| 1054 | } |
| 1055 | |
| 1056 | /* DMA in the tag bytes... */ |
| 1057 | esp->command_block[0] = 0xff; |
| 1058 | esp->command_block[1] = 0xff; |
| 1059 | esp->ops->send_dma_cmd(esp, esp->command_block_dma, |
| 1060 | 2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI); |
| 1061 | |
| 1062 | /* ACK the msssage. */ |
| 1063 | scsi_esp_cmd(esp, ESP_CMD_MOK); |
| 1064 | |
| 1065 | for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) { |
| 1066 | if (esp->ops->irq_pending(esp)) { |
| 1067 | esp->sreg = esp_read8(ESP_STATUS); |
| 1068 | esp->ireg = esp_read8(ESP_INTRPT); |
| 1069 | if (esp->ireg & ESP_INTR_FDONE) |
| 1070 | break; |
| 1071 | } |
| 1072 | udelay(1); |
| 1073 | } |
| 1074 | if (i == ESP_RESELECT_TAG_LIMIT) { |
| 1075 | printk(KERN_ERR PFX "esp%d: Reconnect IRQ2 timeout\n", |
| 1076 | esp->host->unique_id); |
| 1077 | return NULL; |
| 1078 | } |
| 1079 | esp->ops->dma_drain(esp); |
| 1080 | esp->ops->dma_invalidate(esp); |
| 1081 | |
| 1082 | esp_log_reconnect("IRQ2(%d:%x:%x) tag[%x:%x]\n", |
| 1083 | i, esp->ireg, esp->sreg, |
| 1084 | esp->command_block[0], |
| 1085 | esp->command_block[1]); |
| 1086 | |
| 1087 | if (esp->command_block[0] < SIMPLE_QUEUE_TAG || |
| 1088 | esp->command_block[0] > ORDERED_QUEUE_TAG) { |
| 1089 | printk(KERN_ERR PFX "esp%d: Reconnect, bad tag " |
| 1090 | "type %02x.\n", |
| 1091 | esp->host->unique_id, esp->command_block[0]); |
| 1092 | return NULL; |
| 1093 | } |
| 1094 | |
| 1095 | ent = lp->tagged_cmds[esp->command_block[1]]; |
| 1096 | if (!ent) { |
| 1097 | printk(KERN_ERR PFX "esp%d: Reconnect, no entry for " |
| 1098 | "tag %02x.\n", |
| 1099 | esp->host->unique_id, esp->command_block[1]); |
| 1100 | return NULL; |
| 1101 | } |
| 1102 | |
| 1103 | return ent; |
| 1104 | } |
| 1105 | |
| 1106 | static int esp_reconnect(struct esp *esp) |
| 1107 | { |
| 1108 | struct esp_cmd_entry *ent; |
| 1109 | struct esp_target_data *tp; |
| 1110 | struct esp_lun_data *lp; |
| 1111 | struct scsi_device *dev; |
| 1112 | int target, lun; |
| 1113 | |
| 1114 | BUG_ON(esp->active_cmd); |
| 1115 | if (esp->rev == FASHME) { |
| 1116 | /* FASHME puts the target and lun numbers directly |
| 1117 | * into the fifo. |
| 1118 | */ |
| 1119 | target = esp->fifo[0]; |
| 1120 | lun = esp->fifo[1] & 0x7; |
| 1121 | } else { |
| 1122 | u8 bits = esp_read8(ESP_FDATA); |
| 1123 | |
| 1124 | /* Older chips put the lun directly into the fifo, but |
| 1125 | * the target is given as a sample of the arbitration |
| 1126 | * lines on the bus at reselection time. So we should |
| 1127 | * see the ID of the ESP and the one reconnecting target |
| 1128 | * set in the bitmap. |
| 1129 | */ |
| 1130 | if (!(bits & esp->scsi_id_mask)) |
| 1131 | goto do_reset; |
| 1132 | bits &= ~esp->scsi_id_mask; |
| 1133 | if (!bits || (bits & (bits - 1))) |
| 1134 | goto do_reset; |
| 1135 | |
| 1136 | target = ffs(bits) - 1; |
| 1137 | lun = (esp_read8(ESP_FDATA) & 0x7); |
| 1138 | |
| 1139 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 1140 | if (esp->rev == ESP100) { |
| 1141 | u8 ireg = esp_read8(ESP_INTRPT); |
| 1142 | /* This chip has a bug during reselection that can |
| 1143 | * cause a spurious illegal-command interrupt, which |
| 1144 | * we simply ACK here. Another possibility is a bus |
| 1145 | * reset so we must check for that. |
| 1146 | */ |
| 1147 | if (ireg & ESP_INTR_SR) |
| 1148 | goto do_reset; |
| 1149 | } |
| 1150 | scsi_esp_cmd(esp, ESP_CMD_NULL); |
| 1151 | } |
| 1152 | |
| 1153 | esp_write_tgt_sync(esp, target); |
| 1154 | esp_write_tgt_config3(esp, target); |
| 1155 | |
| 1156 | scsi_esp_cmd(esp, ESP_CMD_MOK); |
| 1157 | |
| 1158 | if (esp->rev == FASHME) |
| 1159 | esp_write8(target | ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT, |
| 1160 | ESP_BUSID); |
| 1161 | |
| 1162 | tp = &esp->target[target]; |
| 1163 | dev = __scsi_device_lookup_by_target(tp->starget, lun); |
| 1164 | if (!dev) { |
| 1165 | printk(KERN_ERR PFX "esp%d: Reconnect, no lp " |
| 1166 | "tgt[%u] lun[%u]\n", |
| 1167 | esp->host->unique_id, target, lun); |
| 1168 | goto do_reset; |
| 1169 | } |
| 1170 | lp = dev->hostdata; |
| 1171 | |
| 1172 | ent = lp->non_tagged_cmd; |
| 1173 | if (!ent) { |
| 1174 | ent = esp_reconnect_with_tag(esp, lp); |
| 1175 | if (!ent) |
| 1176 | goto do_reset; |
| 1177 | } |
| 1178 | |
| 1179 | esp->active_cmd = ent; |
| 1180 | |
| 1181 | if (ent->flags & ESP_CMD_FLAG_ABORT) { |
| 1182 | esp->msg_out[0] = ABORT_TASK_SET; |
| 1183 | esp->msg_out_len = 1; |
| 1184 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1185 | } |
| 1186 | |
| 1187 | esp_event(esp, ESP_EVENT_CHECK_PHASE); |
| 1188 | esp_restore_pointers(esp, ent); |
| 1189 | esp->flags |= ESP_FLAG_QUICKIRQ_CHECK; |
| 1190 | return 1; |
| 1191 | |
| 1192 | do_reset: |
| 1193 | esp_schedule_reset(esp); |
| 1194 | return 0; |
| 1195 | } |
| 1196 | |
| 1197 | static int esp_finish_select(struct esp *esp) |
| 1198 | { |
| 1199 | struct esp_cmd_entry *ent; |
| 1200 | struct scsi_cmnd *cmd; |
| 1201 | u8 orig_select_state; |
| 1202 | |
| 1203 | orig_select_state = esp->select_state; |
| 1204 | |
| 1205 | /* No longer selecting. */ |
| 1206 | esp->select_state = ESP_SELECT_NONE; |
| 1207 | |
| 1208 | esp->seqreg = esp_read8(ESP_SSTEP) & ESP_STEP_VBITS; |
| 1209 | ent = esp->active_cmd; |
| 1210 | cmd = ent->cmd; |
| 1211 | |
| 1212 | if (esp->ops->dma_error(esp)) { |
| 1213 | /* If we see a DMA error during or as a result of selection, |
| 1214 | * all bets are off. |
| 1215 | */ |
| 1216 | esp_schedule_reset(esp); |
| 1217 | esp_cmd_is_done(esp, ent, cmd, (DID_ERROR << 16)); |
| 1218 | return 0; |
| 1219 | } |
| 1220 | |
| 1221 | esp->ops->dma_invalidate(esp); |
| 1222 | |
| 1223 | if (esp->ireg == (ESP_INTR_RSEL | ESP_INTR_FDONE)) { |
| 1224 | struct esp_target_data *tp = &esp->target[cmd->device->id]; |
| 1225 | |
| 1226 | /* Carefully back out of the selection attempt. Release |
| 1227 | * resources (such as DMA mapping & TAG) and reset state (such |
| 1228 | * as message out and command delivery variables). |
| 1229 | */ |
| 1230 | if (!(ent->flags & ESP_CMD_FLAG_AUTOSENSE)) { |
| 1231 | esp_unmap_dma(esp, cmd); |
| 1232 | esp_free_lun_tag(ent, cmd->device->hostdata); |
| 1233 | tp->flags &= ~(ESP_TGT_NEGO_SYNC | ESP_TGT_NEGO_WIDE); |
| 1234 | esp->flags &= ~ESP_FLAG_DOING_SLOWCMD; |
| 1235 | esp->cmd_bytes_ptr = NULL; |
| 1236 | esp->cmd_bytes_left = 0; |
| 1237 | } else { |
| 1238 | esp->ops->unmap_single(esp, ent->sense_dma, |
| 1239 | SCSI_SENSE_BUFFERSIZE, |
| 1240 | DMA_FROM_DEVICE); |
| 1241 | ent->sense_ptr = NULL; |
| 1242 | } |
| 1243 | |
| 1244 | /* Now that the state is unwound properly, put back onto |
| 1245 | * the issue queue. This command is no longer active. |
| 1246 | */ |
| 1247 | list_del(&ent->list); |
| 1248 | list_add(&ent->list, &esp->queued_cmds); |
| 1249 | esp->active_cmd = NULL; |
| 1250 | |
| 1251 | /* Return value ignored by caller, it directly invokes |
| 1252 | * esp_reconnect(). |
| 1253 | */ |
| 1254 | return 0; |
| 1255 | } |
| 1256 | |
| 1257 | if (esp->ireg == ESP_INTR_DC) { |
| 1258 | struct scsi_device *dev = cmd->device; |
| 1259 | |
| 1260 | /* Disconnect. Make sure we re-negotiate sync and |
| 1261 | * wide parameters if this target starts responding |
| 1262 | * again in the future. |
| 1263 | */ |
| 1264 | esp->target[dev->id].flags |= ESP_TGT_CHECK_NEGO; |
| 1265 | |
| 1266 | scsi_esp_cmd(esp, ESP_CMD_ESEL); |
| 1267 | esp_cmd_is_done(esp, ent, cmd, (DID_BAD_TARGET << 16)); |
| 1268 | return 1; |
| 1269 | } |
| 1270 | |
| 1271 | if (esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) { |
| 1272 | /* Selection successful. On pre-FAST chips we have |
| 1273 | * to do a NOP and possibly clean out the FIFO. |
| 1274 | */ |
| 1275 | if (esp->rev <= ESP236) { |
| 1276 | int fcnt = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES; |
| 1277 | |
| 1278 | scsi_esp_cmd(esp, ESP_CMD_NULL); |
| 1279 | |
| 1280 | if (!fcnt && |
| 1281 | (!esp->prev_soff || |
| 1282 | ((esp->sreg & ESP_STAT_PMASK) != ESP_DIP))) |
| 1283 | esp_flush_fifo(esp); |
| 1284 | } |
| 1285 | |
| 1286 | /* If we are doing a slow command, negotiation, etc. |
| 1287 | * we'll do the right thing as we transition to the |
| 1288 | * next phase. |
| 1289 | */ |
| 1290 | esp_event(esp, ESP_EVENT_CHECK_PHASE); |
| 1291 | return 0; |
| 1292 | } |
| 1293 | |
| 1294 | printk("ESP: Unexpected selection completion ireg[%x].\n", |
| 1295 | esp->ireg); |
| 1296 | esp_schedule_reset(esp); |
| 1297 | return 0; |
| 1298 | } |
| 1299 | |
| 1300 | static int esp_data_bytes_sent(struct esp *esp, struct esp_cmd_entry *ent, |
| 1301 | struct scsi_cmnd *cmd) |
| 1302 | { |
| 1303 | int fifo_cnt, ecount, bytes_sent, flush_fifo; |
| 1304 | |
| 1305 | fifo_cnt = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES; |
| 1306 | if (esp->prev_cfg3 & ESP_CONFIG3_EWIDE) |
| 1307 | fifo_cnt <<= 1; |
| 1308 | |
| 1309 | ecount = 0; |
| 1310 | if (!(esp->sreg & ESP_STAT_TCNT)) { |
| 1311 | ecount = ((unsigned int)esp_read8(ESP_TCLOW) | |
| 1312 | (((unsigned int)esp_read8(ESP_TCMED)) << 8)); |
| 1313 | if (esp->rev == FASHME) |
| 1314 | ecount |= ((unsigned int)esp_read8(FAS_RLO)) << 16; |
| 1315 | } |
| 1316 | |
| 1317 | bytes_sent = esp->data_dma_len; |
| 1318 | bytes_sent -= ecount; |
| 1319 | |
| 1320 | if (!(ent->flags & ESP_CMD_FLAG_WRITE)) |
| 1321 | bytes_sent -= fifo_cnt; |
| 1322 | |
| 1323 | flush_fifo = 0; |
| 1324 | if (!esp->prev_soff) { |
| 1325 | /* Synchronous data transfer, always flush fifo. */ |
| 1326 | flush_fifo = 1; |
| 1327 | } else { |
| 1328 | if (esp->rev == ESP100) { |
| 1329 | u32 fflags, phase; |
| 1330 | |
| 1331 | /* ESP100 has a chip bug where in the synchronous data |
| 1332 | * phase it can mistake a final long REQ pulse from the |
| 1333 | * target as an extra data byte. Fun. |
| 1334 | * |
| 1335 | * To detect this case we resample the status register |
| 1336 | * and fifo flags. If we're still in a data phase and |
| 1337 | * we see spurious chunks in the fifo, we return error |
| 1338 | * to the caller which should reset and set things up |
| 1339 | * such that we only try future transfers to this |
| 1340 | * target in synchronous mode. |
| 1341 | */ |
| 1342 | esp->sreg = esp_read8(ESP_STATUS); |
| 1343 | phase = esp->sreg & ESP_STAT_PMASK; |
| 1344 | fflags = esp_read8(ESP_FFLAGS); |
| 1345 | |
| 1346 | if ((phase == ESP_DOP && |
| 1347 | (fflags & ESP_FF_ONOTZERO)) || |
| 1348 | (phase == ESP_DIP && |
| 1349 | (fflags & ESP_FF_FBYTES))) |
| 1350 | return -1; |
| 1351 | } |
| 1352 | if (!(ent->flags & ESP_CMD_FLAG_WRITE)) |
| 1353 | flush_fifo = 1; |
| 1354 | } |
| 1355 | |
| 1356 | if (flush_fifo) |
| 1357 | esp_flush_fifo(esp); |
| 1358 | |
| 1359 | return bytes_sent; |
| 1360 | } |
| 1361 | |
| 1362 | static void esp_setsync(struct esp *esp, struct esp_target_data *tp, |
| 1363 | u8 scsi_period, u8 scsi_offset, |
| 1364 | u8 esp_stp, u8 esp_soff) |
| 1365 | { |
| 1366 | spi_period(tp->starget) = scsi_period; |
| 1367 | spi_offset(tp->starget) = scsi_offset; |
| 1368 | spi_width(tp->starget) = (tp->flags & ESP_TGT_WIDE) ? 1 : 0; |
| 1369 | |
| 1370 | if (esp_soff) { |
| 1371 | esp_stp &= 0x1f; |
| 1372 | esp_soff |= esp->radelay; |
| 1373 | if (esp->rev >= FAS236) { |
| 1374 | u8 bit = ESP_CONFIG3_FSCSI; |
| 1375 | if (esp->rev >= FAS100A) |
| 1376 | bit = ESP_CONFIG3_FAST; |
| 1377 | |
| 1378 | if (scsi_period < 50) { |
| 1379 | if (esp->rev == FASHME) |
| 1380 | esp_soff &= ~esp->radelay; |
| 1381 | tp->esp_config3 |= bit; |
| 1382 | } else { |
| 1383 | tp->esp_config3 &= ~bit; |
| 1384 | } |
| 1385 | esp->prev_cfg3 = tp->esp_config3; |
| 1386 | esp_write8(esp->prev_cfg3, ESP_CFG3); |
| 1387 | } |
| 1388 | } |
| 1389 | |
| 1390 | tp->esp_period = esp->prev_stp = esp_stp; |
| 1391 | tp->esp_offset = esp->prev_soff = esp_soff; |
| 1392 | |
| 1393 | esp_write8(esp_soff, ESP_SOFF); |
| 1394 | esp_write8(esp_stp, ESP_STP); |
| 1395 | |
| 1396 | tp->flags &= ~(ESP_TGT_NEGO_SYNC | ESP_TGT_CHECK_NEGO); |
| 1397 | |
| 1398 | spi_display_xfer_agreement(tp->starget); |
| 1399 | } |
| 1400 | |
| 1401 | static void esp_msgin_reject(struct esp *esp) |
| 1402 | { |
| 1403 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 1404 | struct scsi_cmnd *cmd = ent->cmd; |
| 1405 | struct esp_target_data *tp; |
| 1406 | int tgt; |
| 1407 | |
| 1408 | tgt = cmd->device->id; |
| 1409 | tp = &esp->target[tgt]; |
| 1410 | |
| 1411 | if (tp->flags & ESP_TGT_NEGO_WIDE) { |
| 1412 | tp->flags &= ~(ESP_TGT_NEGO_WIDE | ESP_TGT_WIDE); |
| 1413 | |
| 1414 | if (!esp_need_to_nego_sync(tp)) { |
| 1415 | tp->flags &= ~ESP_TGT_CHECK_NEGO; |
| 1416 | scsi_esp_cmd(esp, ESP_CMD_RATN); |
| 1417 | } else { |
| 1418 | esp->msg_out_len = |
| 1419 | spi_populate_sync_msg(&esp->msg_out[0], |
| 1420 | tp->nego_goal_period, |
| 1421 | tp->nego_goal_offset); |
| 1422 | tp->flags |= ESP_TGT_NEGO_SYNC; |
| 1423 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1424 | } |
| 1425 | return; |
| 1426 | } |
| 1427 | |
| 1428 | if (tp->flags & ESP_TGT_NEGO_SYNC) { |
| 1429 | tp->flags &= ~(ESP_TGT_NEGO_SYNC | ESP_TGT_CHECK_NEGO); |
| 1430 | tp->esp_period = 0; |
| 1431 | tp->esp_offset = 0; |
| 1432 | esp_setsync(esp, tp, 0, 0, 0, 0); |
| 1433 | scsi_esp_cmd(esp, ESP_CMD_RATN); |
| 1434 | return; |
| 1435 | } |
| 1436 | |
| 1437 | esp->msg_out[0] = ABORT_TASK_SET; |
| 1438 | esp->msg_out_len = 1; |
| 1439 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1440 | } |
| 1441 | |
| 1442 | static void esp_msgin_sdtr(struct esp *esp, struct esp_target_data *tp) |
| 1443 | { |
| 1444 | u8 period = esp->msg_in[3]; |
| 1445 | u8 offset = esp->msg_in[4]; |
| 1446 | u8 stp; |
| 1447 | |
| 1448 | if (!(tp->flags & ESP_TGT_NEGO_SYNC)) |
| 1449 | goto do_reject; |
| 1450 | |
| 1451 | if (offset > 15) |
| 1452 | goto do_reject; |
| 1453 | |
| 1454 | if (offset) { |
| 1455 | int rounded_up, one_clock; |
| 1456 | |
| 1457 | if (period > esp->max_period) { |
| 1458 | period = offset = 0; |
| 1459 | goto do_sdtr; |
| 1460 | } |
| 1461 | if (period < esp->min_period) |
| 1462 | goto do_reject; |
| 1463 | |
| 1464 | one_clock = esp->ccycle / 1000; |
| 1465 | rounded_up = (period << 2); |
| 1466 | rounded_up = (rounded_up + one_clock - 1) / one_clock; |
| 1467 | stp = rounded_up; |
| 1468 | if (stp && esp->rev >= FAS236) { |
| 1469 | if (stp >= 50) |
| 1470 | stp--; |
| 1471 | } |
| 1472 | } else { |
| 1473 | stp = 0; |
| 1474 | } |
| 1475 | |
| 1476 | esp_setsync(esp, tp, period, offset, stp, offset); |
| 1477 | return; |
| 1478 | |
| 1479 | do_reject: |
| 1480 | esp->msg_out[0] = MESSAGE_REJECT; |
| 1481 | esp->msg_out_len = 1; |
| 1482 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1483 | return; |
| 1484 | |
| 1485 | do_sdtr: |
| 1486 | tp->nego_goal_period = period; |
| 1487 | tp->nego_goal_offset = offset; |
| 1488 | esp->msg_out_len = |
| 1489 | spi_populate_sync_msg(&esp->msg_out[0], |
| 1490 | tp->nego_goal_period, |
| 1491 | tp->nego_goal_offset); |
| 1492 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1493 | } |
| 1494 | |
| 1495 | static void esp_msgin_wdtr(struct esp *esp, struct esp_target_data *tp) |
| 1496 | { |
| 1497 | int size = 8 << esp->msg_in[3]; |
| 1498 | u8 cfg3; |
| 1499 | |
| 1500 | if (esp->rev != FASHME) |
| 1501 | goto do_reject; |
| 1502 | |
| 1503 | if (size != 8 && size != 16) |
| 1504 | goto do_reject; |
| 1505 | |
| 1506 | if (!(tp->flags & ESP_TGT_NEGO_WIDE)) |
| 1507 | goto do_reject; |
| 1508 | |
| 1509 | cfg3 = tp->esp_config3; |
| 1510 | if (size == 16) { |
| 1511 | tp->flags |= ESP_TGT_WIDE; |
| 1512 | cfg3 |= ESP_CONFIG3_EWIDE; |
| 1513 | } else { |
| 1514 | tp->flags &= ~ESP_TGT_WIDE; |
| 1515 | cfg3 &= ~ESP_CONFIG3_EWIDE; |
| 1516 | } |
| 1517 | tp->esp_config3 = cfg3; |
| 1518 | esp->prev_cfg3 = cfg3; |
| 1519 | esp_write8(cfg3, ESP_CFG3); |
| 1520 | |
| 1521 | tp->flags &= ~ESP_TGT_NEGO_WIDE; |
| 1522 | |
| 1523 | spi_period(tp->starget) = 0; |
| 1524 | spi_offset(tp->starget) = 0; |
| 1525 | if (!esp_need_to_nego_sync(tp)) { |
| 1526 | tp->flags &= ~ESP_TGT_CHECK_NEGO; |
| 1527 | scsi_esp_cmd(esp, ESP_CMD_RATN); |
| 1528 | } else { |
| 1529 | esp->msg_out_len = |
| 1530 | spi_populate_sync_msg(&esp->msg_out[0], |
| 1531 | tp->nego_goal_period, |
| 1532 | tp->nego_goal_offset); |
| 1533 | tp->flags |= ESP_TGT_NEGO_SYNC; |
| 1534 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1535 | } |
| 1536 | return; |
| 1537 | |
| 1538 | do_reject: |
| 1539 | esp->msg_out[0] = MESSAGE_REJECT; |
| 1540 | esp->msg_out_len = 1; |
| 1541 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1542 | } |
| 1543 | |
| 1544 | static void esp_msgin_extended(struct esp *esp) |
| 1545 | { |
| 1546 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 1547 | struct scsi_cmnd *cmd = ent->cmd; |
| 1548 | struct esp_target_data *tp; |
| 1549 | int tgt = cmd->device->id; |
| 1550 | |
| 1551 | tp = &esp->target[tgt]; |
| 1552 | if (esp->msg_in[2] == EXTENDED_SDTR) { |
| 1553 | esp_msgin_sdtr(esp, tp); |
| 1554 | return; |
| 1555 | } |
| 1556 | if (esp->msg_in[2] == EXTENDED_WDTR) { |
| 1557 | esp_msgin_wdtr(esp, tp); |
| 1558 | return; |
| 1559 | } |
| 1560 | |
| 1561 | printk("ESP: Unexpected extended msg type %x\n", |
| 1562 | esp->msg_in[2]); |
| 1563 | |
| 1564 | esp->msg_out[0] = ABORT_TASK_SET; |
| 1565 | esp->msg_out_len = 1; |
| 1566 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1567 | } |
| 1568 | |
| 1569 | /* Analyze msgin bytes received from target so far. Return non-zero |
| 1570 | * if there are more bytes needed to complete the message. |
| 1571 | */ |
| 1572 | static int esp_msgin_process(struct esp *esp) |
| 1573 | { |
| 1574 | u8 msg0 = esp->msg_in[0]; |
| 1575 | int len = esp->msg_in_len; |
| 1576 | |
| 1577 | if (msg0 & 0x80) { |
| 1578 | /* Identify */ |
| 1579 | printk("ESP: Unexpected msgin identify\n"); |
| 1580 | return 0; |
| 1581 | } |
| 1582 | |
| 1583 | switch (msg0) { |
| 1584 | case EXTENDED_MESSAGE: |
| 1585 | if (len == 1) |
| 1586 | return 1; |
| 1587 | if (len < esp->msg_in[1] + 2) |
| 1588 | return 1; |
| 1589 | esp_msgin_extended(esp); |
| 1590 | return 0; |
| 1591 | |
| 1592 | case IGNORE_WIDE_RESIDUE: { |
| 1593 | struct esp_cmd_entry *ent; |
| 1594 | struct esp_cmd_priv *spriv; |
| 1595 | if (len == 1) |
| 1596 | return 1; |
| 1597 | |
| 1598 | if (esp->msg_in[1] != 1) |
| 1599 | goto do_reject; |
| 1600 | |
| 1601 | ent = esp->active_cmd; |
| 1602 | spriv = ESP_CMD_PRIV(ent->cmd); |
| 1603 | |
| 1604 | if (spriv->cur_residue == sg_dma_len(spriv->cur_sg)) { |
| 1605 | spriv->cur_sg--; |
| 1606 | spriv->cur_residue = 1; |
| 1607 | } else |
| 1608 | spriv->cur_residue++; |
| 1609 | spriv->tot_residue++; |
| 1610 | return 0; |
| 1611 | } |
| 1612 | case NOP: |
| 1613 | return 0; |
| 1614 | case RESTORE_POINTERS: |
| 1615 | esp_restore_pointers(esp, esp->active_cmd); |
| 1616 | return 0; |
| 1617 | case SAVE_POINTERS: |
| 1618 | esp_save_pointers(esp, esp->active_cmd); |
| 1619 | return 0; |
| 1620 | |
| 1621 | case COMMAND_COMPLETE: |
| 1622 | case DISCONNECT: { |
| 1623 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 1624 | |
| 1625 | ent->message = msg0; |
| 1626 | esp_event(esp, ESP_EVENT_FREE_BUS); |
| 1627 | esp->flags |= ESP_FLAG_QUICKIRQ_CHECK; |
| 1628 | return 0; |
| 1629 | } |
| 1630 | case MESSAGE_REJECT: |
| 1631 | esp_msgin_reject(esp); |
| 1632 | return 0; |
| 1633 | |
| 1634 | default: |
| 1635 | do_reject: |
| 1636 | esp->msg_out[0] = MESSAGE_REJECT; |
| 1637 | esp->msg_out_len = 1; |
| 1638 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 1639 | return 0; |
| 1640 | } |
| 1641 | } |
| 1642 | |
| 1643 | static int esp_process_event(struct esp *esp) |
| 1644 | { |
| 1645 | int write; |
| 1646 | |
| 1647 | again: |
| 1648 | write = 0; |
| 1649 | switch (esp->event) { |
| 1650 | case ESP_EVENT_CHECK_PHASE: |
| 1651 | switch (esp->sreg & ESP_STAT_PMASK) { |
| 1652 | case ESP_DOP: |
| 1653 | esp_event(esp, ESP_EVENT_DATA_OUT); |
| 1654 | break; |
| 1655 | case ESP_DIP: |
| 1656 | esp_event(esp, ESP_EVENT_DATA_IN); |
| 1657 | break; |
| 1658 | case ESP_STATP: |
| 1659 | esp_flush_fifo(esp); |
| 1660 | scsi_esp_cmd(esp, ESP_CMD_ICCSEQ); |
| 1661 | esp_event(esp, ESP_EVENT_STATUS); |
| 1662 | esp->flags |= ESP_FLAG_QUICKIRQ_CHECK; |
| 1663 | return 1; |
| 1664 | |
| 1665 | case ESP_MOP: |
| 1666 | esp_event(esp, ESP_EVENT_MSGOUT); |
| 1667 | break; |
| 1668 | |
| 1669 | case ESP_MIP: |
| 1670 | esp_event(esp, ESP_EVENT_MSGIN); |
| 1671 | break; |
| 1672 | |
| 1673 | case ESP_CMDP: |
| 1674 | esp_event(esp, ESP_EVENT_CMD_START); |
| 1675 | break; |
| 1676 | |
| 1677 | default: |
| 1678 | printk("ESP: Unexpected phase, sreg=%02x\n", |
| 1679 | esp->sreg); |
| 1680 | esp_schedule_reset(esp); |
| 1681 | return 0; |
| 1682 | } |
| 1683 | goto again; |
| 1684 | break; |
| 1685 | |
| 1686 | case ESP_EVENT_DATA_IN: |
| 1687 | write = 1; |
| 1688 | /* fallthru */ |
| 1689 | |
| 1690 | case ESP_EVENT_DATA_OUT: { |
| 1691 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 1692 | struct scsi_cmnd *cmd = ent->cmd; |
| 1693 | dma_addr_t dma_addr = esp_cur_dma_addr(ent, cmd); |
| 1694 | unsigned int dma_len = esp_cur_dma_len(ent, cmd); |
| 1695 | |
| 1696 | if (esp->rev == ESP100) |
| 1697 | scsi_esp_cmd(esp, ESP_CMD_NULL); |
| 1698 | |
| 1699 | if (write) |
| 1700 | ent->flags |= ESP_CMD_FLAG_WRITE; |
| 1701 | else |
| 1702 | ent->flags &= ~ESP_CMD_FLAG_WRITE; |
| 1703 | |
| 1704 | dma_len = esp_dma_length_limit(esp, dma_addr, dma_len); |
| 1705 | esp->data_dma_len = dma_len; |
| 1706 | |
| 1707 | if (!dma_len) { |
| 1708 | printk(KERN_ERR PFX "esp%d: DMA length is zero!\n", |
| 1709 | esp->host->unique_id); |
Alexey Dobriyan | e1f2a09 | 2007-04-27 15:19:27 -0700 | [diff] [blame] | 1710 | printk(KERN_ERR PFX "esp%d: cur adr[%08llx] len[%08x]\n", |
David S. Miller | cd9ad58 | 2007-04-26 21:19:23 -0700 | [diff] [blame] | 1711 | esp->host->unique_id, |
Alexey Dobriyan | e1f2a09 | 2007-04-27 15:19:27 -0700 | [diff] [blame] | 1712 | (unsigned long long)esp_cur_dma_addr(ent, cmd), |
David S. Miller | cd9ad58 | 2007-04-26 21:19:23 -0700 | [diff] [blame] | 1713 | esp_cur_dma_len(ent, cmd)); |
| 1714 | esp_schedule_reset(esp); |
| 1715 | return 0; |
| 1716 | } |
| 1717 | |
Alexey Dobriyan | e1f2a09 | 2007-04-27 15:19:27 -0700 | [diff] [blame] | 1718 | esp_log_datastart("ESP: start data addr[%08llx] len[%u] " |
David S. Miller | cd9ad58 | 2007-04-26 21:19:23 -0700 | [diff] [blame] | 1719 | "write(%d)\n", |
Alexey Dobriyan | e1f2a09 | 2007-04-27 15:19:27 -0700 | [diff] [blame] | 1720 | (unsigned long long)dma_addr, dma_len, write); |
David S. Miller | cd9ad58 | 2007-04-26 21:19:23 -0700 | [diff] [blame] | 1721 | |
| 1722 | esp->ops->send_dma_cmd(esp, dma_addr, dma_len, dma_len, |
| 1723 | write, ESP_CMD_DMA | ESP_CMD_TI); |
| 1724 | esp_event(esp, ESP_EVENT_DATA_DONE); |
| 1725 | break; |
| 1726 | } |
| 1727 | case ESP_EVENT_DATA_DONE: { |
| 1728 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 1729 | struct scsi_cmnd *cmd = ent->cmd; |
| 1730 | int bytes_sent; |
| 1731 | |
| 1732 | if (esp->ops->dma_error(esp)) { |
| 1733 | printk("ESP: data done, DMA error, resetting\n"); |
| 1734 | esp_schedule_reset(esp); |
| 1735 | return 0; |
| 1736 | } |
| 1737 | |
| 1738 | if (ent->flags & ESP_CMD_FLAG_WRITE) { |
| 1739 | /* XXX parity errors, etc. XXX */ |
| 1740 | |
| 1741 | esp->ops->dma_drain(esp); |
| 1742 | } |
| 1743 | esp->ops->dma_invalidate(esp); |
| 1744 | |
| 1745 | if (esp->ireg != ESP_INTR_BSERV) { |
| 1746 | /* We should always see exactly a bus-service |
| 1747 | * interrupt at the end of a successful transfer. |
| 1748 | */ |
| 1749 | printk("ESP: data done, not BSERV, resetting\n"); |
| 1750 | esp_schedule_reset(esp); |
| 1751 | return 0; |
| 1752 | } |
| 1753 | |
| 1754 | bytes_sent = esp_data_bytes_sent(esp, ent, cmd); |
| 1755 | |
| 1756 | esp_log_datadone("ESP: data done flgs[%x] sent[%d]\n", |
| 1757 | ent->flags, bytes_sent); |
| 1758 | |
| 1759 | if (bytes_sent < 0) { |
| 1760 | /* XXX force sync mode for this target XXX */ |
| 1761 | esp_schedule_reset(esp); |
| 1762 | return 0; |
| 1763 | } |
| 1764 | |
| 1765 | esp_advance_dma(esp, ent, cmd, bytes_sent); |
| 1766 | esp_event(esp, ESP_EVENT_CHECK_PHASE); |
| 1767 | goto again; |
| 1768 | break; |
| 1769 | } |
| 1770 | |
| 1771 | case ESP_EVENT_STATUS: { |
| 1772 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 1773 | |
| 1774 | if (esp->ireg & ESP_INTR_FDONE) { |
| 1775 | ent->status = esp_read8(ESP_FDATA); |
| 1776 | ent->message = esp_read8(ESP_FDATA); |
| 1777 | scsi_esp_cmd(esp, ESP_CMD_MOK); |
| 1778 | } else if (esp->ireg == ESP_INTR_BSERV) { |
| 1779 | ent->status = esp_read8(ESP_FDATA); |
| 1780 | ent->message = 0xff; |
| 1781 | esp_event(esp, ESP_EVENT_MSGIN); |
| 1782 | return 0; |
| 1783 | } |
| 1784 | |
| 1785 | if (ent->message != COMMAND_COMPLETE) { |
| 1786 | printk("ESP: Unexpected message %x in status\n", |
| 1787 | ent->message); |
| 1788 | esp_schedule_reset(esp); |
| 1789 | return 0; |
| 1790 | } |
| 1791 | |
| 1792 | esp_event(esp, ESP_EVENT_FREE_BUS); |
| 1793 | esp->flags |= ESP_FLAG_QUICKIRQ_CHECK; |
| 1794 | break; |
| 1795 | } |
| 1796 | case ESP_EVENT_FREE_BUS: { |
| 1797 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 1798 | struct scsi_cmnd *cmd = ent->cmd; |
| 1799 | |
| 1800 | if (ent->message == COMMAND_COMPLETE || |
| 1801 | ent->message == DISCONNECT) |
| 1802 | scsi_esp_cmd(esp, ESP_CMD_ESEL); |
| 1803 | |
| 1804 | if (ent->message == COMMAND_COMPLETE) { |
| 1805 | esp_log_cmddone("ESP: Command done status[%x] " |
| 1806 | "message[%x]\n", |
| 1807 | ent->status, ent->message); |
| 1808 | if (ent->status == SAM_STAT_TASK_SET_FULL) |
| 1809 | esp_event_queue_full(esp, ent); |
| 1810 | |
| 1811 | if (ent->status == SAM_STAT_CHECK_CONDITION && |
| 1812 | !(ent->flags & ESP_CMD_FLAG_AUTOSENSE)) { |
| 1813 | ent->flags |= ESP_CMD_FLAG_AUTOSENSE; |
| 1814 | esp_autosense(esp, ent); |
| 1815 | } else { |
| 1816 | esp_cmd_is_done(esp, ent, cmd, |
| 1817 | compose_result(ent->status, |
| 1818 | ent->message, |
| 1819 | DID_OK)); |
| 1820 | } |
| 1821 | } else if (ent->message == DISCONNECT) { |
| 1822 | esp_log_disconnect("ESP: Disconnecting tgt[%d] " |
| 1823 | "tag[%x:%x]\n", |
| 1824 | cmd->device->id, |
| 1825 | ent->tag[0], ent->tag[1]); |
| 1826 | |
| 1827 | esp->active_cmd = NULL; |
| 1828 | esp_maybe_execute_command(esp); |
| 1829 | } else { |
| 1830 | printk("ESP: Unexpected message %x in freebus\n", |
| 1831 | ent->message); |
| 1832 | esp_schedule_reset(esp); |
| 1833 | return 0; |
| 1834 | } |
| 1835 | if (esp->active_cmd) |
| 1836 | esp->flags |= ESP_FLAG_QUICKIRQ_CHECK; |
| 1837 | break; |
| 1838 | } |
| 1839 | case ESP_EVENT_MSGOUT: { |
| 1840 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 1841 | |
| 1842 | if (esp_debug & ESP_DEBUG_MSGOUT) { |
| 1843 | int i; |
| 1844 | printk("ESP: Sending message [ "); |
| 1845 | for (i = 0; i < esp->msg_out_len; i++) |
| 1846 | printk("%02x ", esp->msg_out[i]); |
| 1847 | printk("]\n"); |
| 1848 | } |
| 1849 | |
| 1850 | if (esp->rev == FASHME) { |
| 1851 | int i; |
| 1852 | |
| 1853 | /* Always use the fifo. */ |
| 1854 | for (i = 0; i < esp->msg_out_len; i++) { |
| 1855 | esp_write8(esp->msg_out[i], ESP_FDATA); |
| 1856 | esp_write8(0, ESP_FDATA); |
| 1857 | } |
| 1858 | scsi_esp_cmd(esp, ESP_CMD_TI); |
| 1859 | } else { |
| 1860 | if (esp->msg_out_len == 1) { |
| 1861 | esp_write8(esp->msg_out[0], ESP_FDATA); |
| 1862 | scsi_esp_cmd(esp, ESP_CMD_TI); |
| 1863 | } else { |
| 1864 | /* Use DMA. */ |
| 1865 | memcpy(esp->command_block, |
| 1866 | esp->msg_out, |
| 1867 | esp->msg_out_len); |
| 1868 | |
| 1869 | esp->ops->send_dma_cmd(esp, |
| 1870 | esp->command_block_dma, |
| 1871 | esp->msg_out_len, |
| 1872 | esp->msg_out_len, |
| 1873 | 0, |
| 1874 | ESP_CMD_DMA|ESP_CMD_TI); |
| 1875 | } |
| 1876 | } |
| 1877 | esp_event(esp, ESP_EVENT_MSGOUT_DONE); |
| 1878 | break; |
| 1879 | } |
| 1880 | case ESP_EVENT_MSGOUT_DONE: |
| 1881 | if (esp->rev == FASHME) { |
| 1882 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 1883 | } else { |
| 1884 | if (esp->msg_out_len > 1) |
| 1885 | esp->ops->dma_invalidate(esp); |
| 1886 | } |
| 1887 | |
| 1888 | if (!(esp->ireg & ESP_INTR_DC)) { |
| 1889 | if (esp->rev != FASHME) |
| 1890 | scsi_esp_cmd(esp, ESP_CMD_NULL); |
| 1891 | } |
| 1892 | esp_event(esp, ESP_EVENT_CHECK_PHASE); |
| 1893 | goto again; |
| 1894 | case ESP_EVENT_MSGIN: |
| 1895 | if (esp->ireg & ESP_INTR_BSERV) { |
| 1896 | if (esp->rev == FASHME) { |
| 1897 | if (!(esp_read8(ESP_STATUS2) & |
| 1898 | ESP_STAT2_FEMPTY)) |
| 1899 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 1900 | } else { |
| 1901 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 1902 | if (esp->rev == ESP100) |
| 1903 | scsi_esp_cmd(esp, ESP_CMD_NULL); |
| 1904 | } |
| 1905 | scsi_esp_cmd(esp, ESP_CMD_TI); |
| 1906 | esp->flags |= ESP_FLAG_QUICKIRQ_CHECK; |
| 1907 | return 1; |
| 1908 | } |
| 1909 | if (esp->ireg & ESP_INTR_FDONE) { |
| 1910 | u8 val; |
| 1911 | |
| 1912 | if (esp->rev == FASHME) |
| 1913 | val = esp->fifo[0]; |
| 1914 | else |
| 1915 | val = esp_read8(ESP_FDATA); |
| 1916 | esp->msg_in[esp->msg_in_len++] = val; |
| 1917 | |
| 1918 | esp_log_msgin("ESP: Got msgin byte %x\n", val); |
| 1919 | |
| 1920 | if (!esp_msgin_process(esp)) |
| 1921 | esp->msg_in_len = 0; |
| 1922 | |
| 1923 | if (esp->rev == FASHME) |
| 1924 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 1925 | |
| 1926 | scsi_esp_cmd(esp, ESP_CMD_MOK); |
| 1927 | |
| 1928 | if (esp->event != ESP_EVENT_FREE_BUS) |
| 1929 | esp_event(esp, ESP_EVENT_CHECK_PHASE); |
| 1930 | } else { |
| 1931 | printk("ESP: MSGIN neither BSERV not FDON, resetting"); |
| 1932 | esp_schedule_reset(esp); |
| 1933 | return 0; |
| 1934 | } |
| 1935 | break; |
| 1936 | case ESP_EVENT_CMD_START: |
| 1937 | memcpy(esp->command_block, esp->cmd_bytes_ptr, |
| 1938 | esp->cmd_bytes_left); |
| 1939 | if (esp->rev == FASHME) |
| 1940 | scsi_esp_cmd(esp, ESP_CMD_FLUSH); |
| 1941 | esp->ops->send_dma_cmd(esp, esp->command_block_dma, |
| 1942 | esp->cmd_bytes_left, 16, 0, |
| 1943 | ESP_CMD_DMA | ESP_CMD_TI); |
| 1944 | esp_event(esp, ESP_EVENT_CMD_DONE); |
| 1945 | esp->flags |= ESP_FLAG_QUICKIRQ_CHECK; |
| 1946 | break; |
| 1947 | case ESP_EVENT_CMD_DONE: |
| 1948 | esp->ops->dma_invalidate(esp); |
| 1949 | if (esp->ireg & ESP_INTR_BSERV) { |
| 1950 | esp_event(esp, ESP_EVENT_CHECK_PHASE); |
| 1951 | goto again; |
| 1952 | } |
| 1953 | esp_schedule_reset(esp); |
| 1954 | return 0; |
| 1955 | break; |
| 1956 | |
| 1957 | case ESP_EVENT_RESET: |
| 1958 | scsi_esp_cmd(esp, ESP_CMD_RS); |
| 1959 | break; |
| 1960 | |
| 1961 | default: |
| 1962 | printk("ESP: Unexpected event %x, resetting\n", |
| 1963 | esp->event); |
| 1964 | esp_schedule_reset(esp); |
| 1965 | return 0; |
| 1966 | break; |
| 1967 | } |
| 1968 | return 1; |
| 1969 | } |
| 1970 | |
| 1971 | static void esp_reset_cleanup_one(struct esp *esp, struct esp_cmd_entry *ent) |
| 1972 | { |
| 1973 | struct scsi_cmnd *cmd = ent->cmd; |
| 1974 | |
| 1975 | esp_unmap_dma(esp, cmd); |
| 1976 | esp_free_lun_tag(ent, cmd->device->hostdata); |
| 1977 | cmd->result = DID_RESET << 16; |
| 1978 | |
| 1979 | if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) { |
| 1980 | esp->ops->unmap_single(esp, ent->sense_dma, |
| 1981 | SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); |
| 1982 | ent->sense_ptr = NULL; |
| 1983 | } |
| 1984 | |
| 1985 | cmd->scsi_done(cmd); |
| 1986 | list_del(&ent->list); |
| 1987 | esp_put_ent(esp, ent); |
| 1988 | } |
| 1989 | |
| 1990 | static void esp_clear_hold(struct scsi_device *dev, void *data) |
| 1991 | { |
| 1992 | struct esp_lun_data *lp = dev->hostdata; |
| 1993 | |
| 1994 | BUG_ON(lp->num_tagged); |
| 1995 | lp->hold = 0; |
| 1996 | } |
| 1997 | |
| 1998 | static void esp_reset_cleanup(struct esp *esp) |
| 1999 | { |
| 2000 | struct esp_cmd_entry *ent, *tmp; |
| 2001 | int i; |
| 2002 | |
| 2003 | list_for_each_entry_safe(ent, tmp, &esp->queued_cmds, list) { |
| 2004 | struct scsi_cmnd *cmd = ent->cmd; |
| 2005 | |
| 2006 | list_del(&ent->list); |
| 2007 | cmd->result = DID_RESET << 16; |
| 2008 | cmd->scsi_done(cmd); |
| 2009 | esp_put_ent(esp, ent); |
| 2010 | } |
| 2011 | |
| 2012 | list_for_each_entry_safe(ent, tmp, &esp->active_cmds, list) { |
| 2013 | if (ent == esp->active_cmd) |
| 2014 | esp->active_cmd = NULL; |
| 2015 | esp_reset_cleanup_one(esp, ent); |
| 2016 | } |
| 2017 | |
| 2018 | BUG_ON(esp->active_cmd != NULL); |
| 2019 | |
| 2020 | /* Force renegotiation of sync/wide transfers. */ |
| 2021 | for (i = 0; i < ESP_MAX_TARGET; i++) { |
| 2022 | struct esp_target_data *tp = &esp->target[i]; |
| 2023 | |
| 2024 | tp->esp_period = 0; |
| 2025 | tp->esp_offset = 0; |
| 2026 | tp->esp_config3 &= ~(ESP_CONFIG3_EWIDE | |
| 2027 | ESP_CONFIG3_FSCSI | |
| 2028 | ESP_CONFIG3_FAST); |
| 2029 | tp->flags &= ~ESP_TGT_WIDE; |
| 2030 | tp->flags |= ESP_TGT_CHECK_NEGO; |
| 2031 | |
| 2032 | if (tp->starget) |
| 2033 | starget_for_each_device(tp->starget, NULL, |
| 2034 | esp_clear_hold); |
| 2035 | } |
| 2036 | } |
| 2037 | |
| 2038 | /* Runs under host->lock */ |
| 2039 | static void __esp_interrupt(struct esp *esp) |
| 2040 | { |
| 2041 | int finish_reset, intr_done; |
| 2042 | u8 phase; |
| 2043 | |
| 2044 | esp->sreg = esp_read8(ESP_STATUS); |
| 2045 | |
| 2046 | if (esp->flags & ESP_FLAG_RESETTING) { |
| 2047 | finish_reset = 1; |
| 2048 | } else { |
| 2049 | if (esp_check_gross_error(esp)) |
| 2050 | return; |
| 2051 | |
| 2052 | finish_reset = esp_check_spur_intr(esp); |
| 2053 | if (finish_reset < 0) |
| 2054 | return; |
| 2055 | } |
| 2056 | |
| 2057 | esp->ireg = esp_read8(ESP_INTRPT); |
| 2058 | |
| 2059 | if (esp->ireg & ESP_INTR_SR) |
| 2060 | finish_reset = 1; |
| 2061 | |
| 2062 | if (finish_reset) { |
| 2063 | esp_reset_cleanup(esp); |
| 2064 | if (esp->eh_reset) { |
| 2065 | complete(esp->eh_reset); |
| 2066 | esp->eh_reset = NULL; |
| 2067 | } |
| 2068 | return; |
| 2069 | } |
| 2070 | |
| 2071 | phase = (esp->sreg & ESP_STAT_PMASK); |
| 2072 | if (esp->rev == FASHME) { |
| 2073 | if (((phase != ESP_DIP && phase != ESP_DOP) && |
| 2074 | esp->select_state == ESP_SELECT_NONE && |
| 2075 | esp->event != ESP_EVENT_STATUS && |
| 2076 | esp->event != ESP_EVENT_DATA_DONE) || |
| 2077 | (esp->ireg & ESP_INTR_RSEL)) { |
| 2078 | esp->sreg2 = esp_read8(ESP_STATUS2); |
| 2079 | if (!(esp->sreg2 & ESP_STAT2_FEMPTY) || |
| 2080 | (esp->sreg2 & ESP_STAT2_F1BYTE)) |
| 2081 | hme_read_fifo(esp); |
| 2082 | } |
| 2083 | } |
| 2084 | |
| 2085 | esp_log_intr("ESP: intr sreg[%02x] seqreg[%02x] " |
| 2086 | "sreg2[%02x] ireg[%02x]\n", |
| 2087 | esp->sreg, esp->seqreg, esp->sreg2, esp->ireg); |
| 2088 | |
| 2089 | intr_done = 0; |
| 2090 | |
| 2091 | if (esp->ireg & (ESP_INTR_S | ESP_INTR_SATN | ESP_INTR_IC)) { |
| 2092 | printk("ESP: unexpected IREG %02x\n", esp->ireg); |
| 2093 | if (esp->ireg & ESP_INTR_IC) |
| 2094 | esp_dump_cmd_log(esp); |
| 2095 | |
| 2096 | esp_schedule_reset(esp); |
| 2097 | } else { |
| 2098 | if (!(esp->ireg & ESP_INTR_RSEL)) { |
| 2099 | /* Some combination of FDONE, BSERV, DC. */ |
| 2100 | if (esp->select_state != ESP_SELECT_NONE) |
| 2101 | intr_done = esp_finish_select(esp); |
| 2102 | } else if (esp->ireg & ESP_INTR_RSEL) { |
| 2103 | if (esp->active_cmd) |
| 2104 | (void) esp_finish_select(esp); |
| 2105 | intr_done = esp_reconnect(esp); |
| 2106 | } |
| 2107 | } |
| 2108 | while (!intr_done) |
| 2109 | intr_done = esp_process_event(esp); |
| 2110 | } |
| 2111 | |
| 2112 | irqreturn_t scsi_esp_intr(int irq, void *dev_id) |
| 2113 | { |
| 2114 | struct esp *esp = dev_id; |
| 2115 | unsigned long flags; |
| 2116 | irqreturn_t ret; |
| 2117 | |
| 2118 | spin_lock_irqsave(esp->host->host_lock, flags); |
| 2119 | ret = IRQ_NONE; |
| 2120 | if (esp->ops->irq_pending(esp)) { |
| 2121 | ret = IRQ_HANDLED; |
| 2122 | for (;;) { |
| 2123 | int i; |
| 2124 | |
| 2125 | __esp_interrupt(esp); |
| 2126 | if (!(esp->flags & ESP_FLAG_QUICKIRQ_CHECK)) |
| 2127 | break; |
| 2128 | esp->flags &= ~ESP_FLAG_QUICKIRQ_CHECK; |
| 2129 | |
| 2130 | for (i = 0; i < ESP_QUICKIRQ_LIMIT; i++) { |
| 2131 | if (esp->ops->irq_pending(esp)) |
| 2132 | break; |
| 2133 | } |
| 2134 | if (i == ESP_QUICKIRQ_LIMIT) |
| 2135 | break; |
| 2136 | } |
| 2137 | } |
| 2138 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2139 | |
| 2140 | return ret; |
| 2141 | } |
| 2142 | EXPORT_SYMBOL(scsi_esp_intr); |
| 2143 | |
| 2144 | static void __devinit esp_get_revision(struct esp *esp) |
| 2145 | { |
| 2146 | u8 val; |
| 2147 | |
| 2148 | esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7)); |
| 2149 | esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY); |
| 2150 | esp_write8(esp->config2, ESP_CFG2); |
| 2151 | |
| 2152 | val = esp_read8(ESP_CFG2); |
| 2153 | val &= ~ESP_CONFIG2_MAGIC; |
| 2154 | if (val != (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) { |
| 2155 | /* If what we write to cfg2 does not come back, cfg2 is not |
| 2156 | * implemented, therefore this must be a plain esp100. |
| 2157 | */ |
| 2158 | esp->rev = ESP100; |
| 2159 | } else { |
| 2160 | esp->config2 = 0; |
| 2161 | esp_set_all_config3(esp, 5); |
| 2162 | esp->prev_cfg3 = 5; |
| 2163 | esp_write8(esp->config2, ESP_CFG2); |
| 2164 | esp_write8(0, ESP_CFG3); |
| 2165 | esp_write8(esp->prev_cfg3, ESP_CFG3); |
| 2166 | |
| 2167 | val = esp_read8(ESP_CFG3); |
| 2168 | if (val != 5) { |
| 2169 | /* The cfg2 register is implemented, however |
| 2170 | * cfg3 is not, must be esp100a. |
| 2171 | */ |
| 2172 | esp->rev = ESP100A; |
| 2173 | } else { |
| 2174 | esp_set_all_config3(esp, 0); |
| 2175 | esp->prev_cfg3 = 0; |
| 2176 | esp_write8(esp->prev_cfg3, ESP_CFG3); |
| 2177 | |
| 2178 | /* All of cfg{1,2,3} implemented, must be one of |
| 2179 | * the fas variants, figure out which one. |
| 2180 | */ |
| 2181 | if (esp->cfact == 0 || esp->cfact > ESP_CCF_F5) { |
| 2182 | esp->rev = FAST; |
| 2183 | esp->sync_defp = SYNC_DEFP_FAST; |
| 2184 | } else { |
| 2185 | esp->rev = ESP236; |
| 2186 | } |
| 2187 | esp->config2 = 0; |
| 2188 | esp_write8(esp->config2, ESP_CFG2); |
| 2189 | } |
| 2190 | } |
| 2191 | } |
| 2192 | |
| 2193 | static void __devinit esp_init_swstate(struct esp *esp) |
| 2194 | { |
| 2195 | int i; |
| 2196 | |
| 2197 | INIT_LIST_HEAD(&esp->queued_cmds); |
| 2198 | INIT_LIST_HEAD(&esp->active_cmds); |
| 2199 | INIT_LIST_HEAD(&esp->esp_cmd_pool); |
| 2200 | |
| 2201 | /* Start with a clear state, domain validation (via ->slave_configure, |
| 2202 | * spi_dv_device()) will attempt to enable SYNC, WIDE, and tagged |
| 2203 | * commands. |
| 2204 | */ |
| 2205 | for (i = 0 ; i < ESP_MAX_TARGET; i++) { |
| 2206 | esp->target[i].flags = 0; |
| 2207 | esp->target[i].nego_goal_period = 0; |
| 2208 | esp->target[i].nego_goal_offset = 0; |
| 2209 | esp->target[i].nego_goal_width = 0; |
| 2210 | esp->target[i].nego_goal_tags = 0; |
| 2211 | } |
| 2212 | } |
| 2213 | |
| 2214 | /* This places the ESP into a known state at boot time. */ |
Martin Habets | d679f80 | 2007-05-07 14:05:03 -0700 | [diff] [blame] | 2215 | static void esp_bootup_reset(struct esp *esp) |
David S. Miller | cd9ad58 | 2007-04-26 21:19:23 -0700 | [diff] [blame] | 2216 | { |
| 2217 | u8 val; |
| 2218 | |
| 2219 | /* Reset the DMA */ |
| 2220 | esp->ops->reset_dma(esp); |
| 2221 | |
| 2222 | /* Reset the ESP */ |
| 2223 | esp_reset_esp(esp); |
| 2224 | |
| 2225 | /* Reset the SCSI bus, but tell ESP not to generate an irq */ |
| 2226 | val = esp_read8(ESP_CFG1); |
| 2227 | val |= ESP_CONFIG1_SRRDISAB; |
| 2228 | esp_write8(val, ESP_CFG1); |
| 2229 | |
| 2230 | scsi_esp_cmd(esp, ESP_CMD_RS); |
| 2231 | udelay(400); |
| 2232 | |
| 2233 | esp_write8(esp->config1, ESP_CFG1); |
| 2234 | |
| 2235 | /* Eat any bitrot in the chip and we are done... */ |
| 2236 | esp_read8(ESP_INTRPT); |
| 2237 | } |
| 2238 | |
| 2239 | static void __devinit esp_set_clock_params(struct esp *esp) |
| 2240 | { |
| 2241 | int fmhz; |
| 2242 | u8 ccf; |
| 2243 | |
| 2244 | /* This is getting messy but it has to be done correctly or else |
| 2245 | * you get weird behavior all over the place. We are trying to |
| 2246 | * basically figure out three pieces of information. |
| 2247 | * |
| 2248 | * a) Clock Conversion Factor |
| 2249 | * |
| 2250 | * This is a representation of the input crystal clock frequency |
| 2251 | * going into the ESP on this machine. Any operation whose timing |
| 2252 | * is longer than 400ns depends on this value being correct. For |
| 2253 | * example, you'll get blips for arbitration/selection during high |
| 2254 | * load or with multiple targets if this is not set correctly. |
| 2255 | * |
| 2256 | * b) Selection Time-Out |
| 2257 | * |
| 2258 | * The ESP isn't very bright and will arbitrate for the bus and try |
| 2259 | * to select a target forever if you let it. This value tells the |
| 2260 | * ESP when it has taken too long to negotiate and that it should |
| 2261 | * interrupt the CPU so we can see what happened. The value is |
| 2262 | * computed as follows (from NCR/Symbios chip docs). |
| 2263 | * |
| 2264 | * (Time Out Period) * (Input Clock) |
| 2265 | * STO = ---------------------------------- |
| 2266 | * (8192) * (Clock Conversion Factor) |
| 2267 | * |
| 2268 | * We use a time out period of 250ms (ESP_BUS_TIMEOUT). |
| 2269 | * |
| 2270 | * c) Imperical constants for synchronous offset and transfer period |
| 2271 | * register values |
| 2272 | * |
| 2273 | * This entails the smallest and largest sync period we could ever |
| 2274 | * handle on this ESP. |
| 2275 | */ |
| 2276 | fmhz = esp->cfreq; |
| 2277 | |
| 2278 | ccf = ((fmhz / 1000000) + 4) / 5; |
| 2279 | if (ccf == 1) |
| 2280 | ccf = 2; |
| 2281 | |
| 2282 | /* If we can't find anything reasonable, just assume 20MHZ. |
| 2283 | * This is the clock frequency of the older sun4c's where I've |
| 2284 | * been unable to find the clock-frequency PROM property. All |
| 2285 | * other machines provide useful values it seems. |
| 2286 | */ |
| 2287 | if (fmhz <= 5000000 || ccf < 1 || ccf > 8) { |
| 2288 | fmhz = 20000000; |
| 2289 | ccf = 4; |
| 2290 | } |
| 2291 | |
| 2292 | esp->cfact = (ccf == 8 ? 0 : ccf); |
| 2293 | esp->cfreq = fmhz; |
| 2294 | esp->ccycle = ESP_MHZ_TO_CYCLE(fmhz); |
| 2295 | esp->ctick = ESP_TICK(ccf, esp->ccycle); |
| 2296 | esp->neg_defp = ESP_NEG_DEFP(fmhz, ccf); |
| 2297 | esp->sync_defp = SYNC_DEFP_SLOW; |
| 2298 | } |
| 2299 | |
| 2300 | static const char *esp_chip_names[] = { |
| 2301 | "ESP100", |
| 2302 | "ESP100A", |
| 2303 | "ESP236", |
| 2304 | "FAS236", |
| 2305 | "FAS100A", |
| 2306 | "FAST", |
| 2307 | "FASHME", |
| 2308 | }; |
| 2309 | |
| 2310 | static struct scsi_transport_template *esp_transport_template; |
| 2311 | |
| 2312 | int __devinit scsi_esp_register(struct esp *esp, struct device *dev) |
| 2313 | { |
| 2314 | static int instance; |
| 2315 | int err; |
| 2316 | |
| 2317 | esp->host->transportt = esp_transport_template; |
| 2318 | esp->host->max_lun = ESP_MAX_LUN; |
| 2319 | esp->host->cmd_per_lun = 2; |
| 2320 | |
| 2321 | esp_set_clock_params(esp); |
| 2322 | |
| 2323 | esp_get_revision(esp); |
| 2324 | |
| 2325 | esp_init_swstate(esp); |
| 2326 | |
| 2327 | esp_bootup_reset(esp); |
| 2328 | |
| 2329 | printk(KERN_INFO PFX "esp%u, regs[%1p:%1p] irq[%u]\n", |
| 2330 | esp->host->unique_id, esp->regs, esp->dma_regs, |
| 2331 | esp->host->irq); |
| 2332 | printk(KERN_INFO PFX "esp%u is a %s, %u MHz (ccf=%u), SCSI ID %u\n", |
| 2333 | esp->host->unique_id, esp_chip_names[esp->rev], |
| 2334 | esp->cfreq / 1000000, esp->cfact, esp->scsi_id); |
| 2335 | |
| 2336 | /* Let the SCSI bus reset settle. */ |
| 2337 | ssleep(esp_bus_reset_settle); |
| 2338 | |
| 2339 | err = scsi_add_host(esp->host, dev); |
| 2340 | if (err) |
| 2341 | return err; |
| 2342 | |
| 2343 | esp->host->unique_id = instance++; |
| 2344 | |
| 2345 | scsi_scan_host(esp->host); |
| 2346 | |
| 2347 | return 0; |
| 2348 | } |
| 2349 | EXPORT_SYMBOL(scsi_esp_register); |
| 2350 | |
| 2351 | void __devexit scsi_esp_unregister(struct esp *esp) |
| 2352 | { |
| 2353 | scsi_remove_host(esp->host); |
| 2354 | } |
| 2355 | EXPORT_SYMBOL(scsi_esp_unregister); |
| 2356 | |
| 2357 | static int esp_slave_alloc(struct scsi_device *dev) |
| 2358 | { |
| 2359 | struct esp *esp = host_to_esp(dev->host); |
| 2360 | struct esp_target_data *tp = &esp->target[dev->id]; |
| 2361 | struct esp_lun_data *lp; |
| 2362 | |
| 2363 | lp = kzalloc(sizeof(*lp), GFP_KERNEL); |
| 2364 | if (!lp) |
| 2365 | return -ENOMEM; |
| 2366 | dev->hostdata = lp; |
| 2367 | |
| 2368 | tp->starget = dev->sdev_target; |
| 2369 | |
| 2370 | spi_min_period(tp->starget) = esp->min_period; |
| 2371 | spi_max_offset(tp->starget) = 15; |
| 2372 | |
| 2373 | if (esp->flags & ESP_FLAG_WIDE_CAPABLE) |
| 2374 | spi_max_width(tp->starget) = 1; |
| 2375 | else |
| 2376 | spi_max_width(tp->starget) = 0; |
| 2377 | |
| 2378 | return 0; |
| 2379 | } |
| 2380 | |
| 2381 | static int esp_slave_configure(struct scsi_device *dev) |
| 2382 | { |
| 2383 | struct esp *esp = host_to_esp(dev->host); |
| 2384 | struct esp_target_data *tp = &esp->target[dev->id]; |
| 2385 | int goal_tags, queue_depth; |
| 2386 | |
| 2387 | goal_tags = 0; |
| 2388 | |
| 2389 | if (dev->tagged_supported) { |
| 2390 | /* XXX make this configurable somehow XXX */ |
| 2391 | goal_tags = ESP_DEFAULT_TAGS; |
| 2392 | |
| 2393 | if (goal_tags > ESP_MAX_TAG) |
| 2394 | goal_tags = ESP_MAX_TAG; |
| 2395 | } |
| 2396 | |
| 2397 | queue_depth = goal_tags; |
| 2398 | if (queue_depth < dev->host->cmd_per_lun) |
| 2399 | queue_depth = dev->host->cmd_per_lun; |
| 2400 | |
| 2401 | if (goal_tags) { |
| 2402 | scsi_set_tag_type(dev, MSG_ORDERED_TAG); |
| 2403 | scsi_activate_tcq(dev, queue_depth); |
| 2404 | } else { |
| 2405 | scsi_deactivate_tcq(dev, queue_depth); |
| 2406 | } |
| 2407 | tp->flags |= ESP_TGT_DISCONNECT; |
| 2408 | |
| 2409 | if (!spi_initial_dv(dev->sdev_target)) |
| 2410 | spi_dv_device(dev); |
| 2411 | |
| 2412 | return 0; |
| 2413 | } |
| 2414 | |
| 2415 | static void esp_slave_destroy(struct scsi_device *dev) |
| 2416 | { |
| 2417 | struct esp_lun_data *lp = dev->hostdata; |
| 2418 | |
| 2419 | kfree(lp); |
| 2420 | dev->hostdata = NULL; |
| 2421 | } |
| 2422 | |
| 2423 | static int esp_eh_abort_handler(struct scsi_cmnd *cmd) |
| 2424 | { |
| 2425 | struct esp *esp = host_to_esp(cmd->device->host); |
| 2426 | struct esp_cmd_entry *ent, *tmp; |
| 2427 | struct completion eh_done; |
| 2428 | unsigned long flags; |
| 2429 | |
| 2430 | /* XXX This helps a lot with debugging but might be a bit |
| 2431 | * XXX much for the final driver. |
| 2432 | */ |
| 2433 | spin_lock_irqsave(esp->host->host_lock, flags); |
| 2434 | printk(KERN_ERR PFX "esp%d: Aborting command [%p:%02x]\n", |
| 2435 | esp->host->unique_id, cmd, cmd->cmnd[0]); |
| 2436 | ent = esp->active_cmd; |
| 2437 | if (ent) |
| 2438 | printk(KERN_ERR PFX "esp%d: Current command [%p:%02x]\n", |
| 2439 | esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]); |
| 2440 | list_for_each_entry(ent, &esp->queued_cmds, list) { |
| 2441 | printk(KERN_ERR PFX "esp%d: Queued command [%p:%02x]\n", |
| 2442 | esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]); |
| 2443 | } |
| 2444 | list_for_each_entry(ent, &esp->active_cmds, list) { |
| 2445 | printk(KERN_ERR PFX "esp%d: Active command [%p:%02x]\n", |
| 2446 | esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]); |
| 2447 | } |
| 2448 | esp_dump_cmd_log(esp); |
| 2449 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2450 | |
| 2451 | spin_lock_irqsave(esp->host->host_lock, flags); |
| 2452 | |
| 2453 | ent = NULL; |
| 2454 | list_for_each_entry(tmp, &esp->queued_cmds, list) { |
| 2455 | if (tmp->cmd == cmd) { |
| 2456 | ent = tmp; |
| 2457 | break; |
| 2458 | } |
| 2459 | } |
| 2460 | |
| 2461 | if (ent) { |
| 2462 | /* Easiest case, we didn't even issue the command |
| 2463 | * yet so it is trivial to abort. |
| 2464 | */ |
| 2465 | list_del(&ent->list); |
| 2466 | |
| 2467 | cmd->result = DID_ABORT << 16; |
| 2468 | cmd->scsi_done(cmd); |
| 2469 | |
| 2470 | esp_put_ent(esp, ent); |
| 2471 | |
| 2472 | goto out_success; |
| 2473 | } |
| 2474 | |
| 2475 | init_completion(&eh_done); |
| 2476 | |
| 2477 | ent = esp->active_cmd; |
| 2478 | if (ent && ent->cmd == cmd) { |
| 2479 | /* Command is the currently active command on |
| 2480 | * the bus. If we already have an output message |
| 2481 | * pending, no dice. |
| 2482 | */ |
| 2483 | if (esp->msg_out_len) |
| 2484 | goto out_failure; |
| 2485 | |
| 2486 | /* Send out an abort, encouraging the target to |
| 2487 | * go to MSGOUT phase by asserting ATN. |
| 2488 | */ |
| 2489 | esp->msg_out[0] = ABORT_TASK_SET; |
| 2490 | esp->msg_out_len = 1; |
| 2491 | ent->eh_done = &eh_done; |
| 2492 | |
| 2493 | scsi_esp_cmd(esp, ESP_CMD_SATN); |
| 2494 | } else { |
| 2495 | /* The command is disconnected. This is not easy to |
| 2496 | * abort. For now we fail and let the scsi error |
| 2497 | * handling layer go try a scsi bus reset or host |
| 2498 | * reset. |
| 2499 | * |
| 2500 | * What we could do is put together a scsi command |
| 2501 | * solely for the purpose of sending an abort message |
| 2502 | * to the target. Coming up with all the code to |
| 2503 | * cook up scsi commands, special case them everywhere, |
| 2504 | * etc. is for questionable gain and it would be better |
| 2505 | * if the generic scsi error handling layer could do at |
| 2506 | * least some of that for us. |
| 2507 | * |
| 2508 | * Anyways this is an area for potential future improvement |
| 2509 | * in this driver. |
| 2510 | */ |
| 2511 | goto out_failure; |
| 2512 | } |
| 2513 | |
| 2514 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2515 | |
| 2516 | if (!wait_for_completion_timeout(&eh_done, 5 * HZ)) { |
| 2517 | spin_lock_irqsave(esp->host->host_lock, flags); |
| 2518 | ent->eh_done = NULL; |
| 2519 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2520 | |
| 2521 | return FAILED; |
| 2522 | } |
| 2523 | |
| 2524 | return SUCCESS; |
| 2525 | |
| 2526 | out_success: |
| 2527 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2528 | return SUCCESS; |
| 2529 | |
| 2530 | out_failure: |
| 2531 | /* XXX This might be a good location to set ESP_TGT_BROKEN |
| 2532 | * XXX since we know which target/lun in particular is |
| 2533 | * XXX causing trouble. |
| 2534 | */ |
| 2535 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2536 | return FAILED; |
| 2537 | } |
| 2538 | |
| 2539 | static int esp_eh_bus_reset_handler(struct scsi_cmnd *cmd) |
| 2540 | { |
| 2541 | struct esp *esp = host_to_esp(cmd->device->host); |
| 2542 | struct completion eh_reset; |
| 2543 | unsigned long flags; |
| 2544 | |
| 2545 | init_completion(&eh_reset); |
| 2546 | |
| 2547 | spin_lock_irqsave(esp->host->host_lock, flags); |
| 2548 | |
| 2549 | esp->eh_reset = &eh_reset; |
| 2550 | |
| 2551 | /* XXX This is too simple... We should add lots of |
| 2552 | * XXX checks here so that if we find that the chip is |
| 2553 | * XXX very wedged we return failure immediately so |
| 2554 | * XXX that we can perform a full chip reset. |
| 2555 | */ |
| 2556 | esp->flags |= ESP_FLAG_RESETTING; |
| 2557 | scsi_esp_cmd(esp, ESP_CMD_RS); |
| 2558 | |
| 2559 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2560 | |
| 2561 | ssleep(esp_bus_reset_settle); |
| 2562 | |
| 2563 | if (!wait_for_completion_timeout(&eh_reset, 5 * HZ)) { |
| 2564 | spin_lock_irqsave(esp->host->host_lock, flags); |
| 2565 | esp->eh_reset = NULL; |
| 2566 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2567 | |
| 2568 | return FAILED; |
| 2569 | } |
| 2570 | |
| 2571 | return SUCCESS; |
| 2572 | } |
| 2573 | |
| 2574 | /* All bets are off, reset the entire device. */ |
| 2575 | static int esp_eh_host_reset_handler(struct scsi_cmnd *cmd) |
| 2576 | { |
| 2577 | struct esp *esp = host_to_esp(cmd->device->host); |
| 2578 | unsigned long flags; |
| 2579 | |
| 2580 | spin_lock_irqsave(esp->host->host_lock, flags); |
| 2581 | esp_bootup_reset(esp); |
| 2582 | esp_reset_cleanup(esp); |
| 2583 | spin_unlock_irqrestore(esp->host->host_lock, flags); |
| 2584 | |
| 2585 | ssleep(esp_bus_reset_settle); |
| 2586 | |
| 2587 | return SUCCESS; |
| 2588 | } |
| 2589 | |
| 2590 | static const char *esp_info(struct Scsi_Host *host) |
| 2591 | { |
| 2592 | return "esp"; |
| 2593 | } |
| 2594 | |
| 2595 | struct scsi_host_template scsi_esp_template = { |
| 2596 | .module = THIS_MODULE, |
| 2597 | .name = "esp", |
| 2598 | .info = esp_info, |
| 2599 | .queuecommand = esp_queuecommand, |
| 2600 | .slave_alloc = esp_slave_alloc, |
| 2601 | .slave_configure = esp_slave_configure, |
| 2602 | .slave_destroy = esp_slave_destroy, |
| 2603 | .eh_abort_handler = esp_eh_abort_handler, |
| 2604 | .eh_bus_reset_handler = esp_eh_bus_reset_handler, |
| 2605 | .eh_host_reset_handler = esp_eh_host_reset_handler, |
| 2606 | .can_queue = 7, |
| 2607 | .this_id = 7, |
| 2608 | .sg_tablesize = SG_ALL, |
| 2609 | .use_clustering = ENABLE_CLUSTERING, |
| 2610 | .max_sectors = 0xffff, |
| 2611 | .skip_settle_delay = 1, |
| 2612 | }; |
| 2613 | EXPORT_SYMBOL(scsi_esp_template); |
| 2614 | |
| 2615 | static void esp_get_signalling(struct Scsi_Host *host) |
| 2616 | { |
| 2617 | struct esp *esp = host_to_esp(host); |
| 2618 | enum spi_signal_type type; |
| 2619 | |
| 2620 | if (esp->flags & ESP_FLAG_DIFFERENTIAL) |
| 2621 | type = SPI_SIGNAL_HVD; |
| 2622 | else |
| 2623 | type = SPI_SIGNAL_SE; |
| 2624 | |
| 2625 | spi_signalling(host) = type; |
| 2626 | } |
| 2627 | |
| 2628 | static void esp_set_offset(struct scsi_target *target, int offset) |
| 2629 | { |
| 2630 | struct Scsi_Host *host = dev_to_shost(target->dev.parent); |
| 2631 | struct esp *esp = host_to_esp(host); |
| 2632 | struct esp_target_data *tp = &esp->target[target->id]; |
| 2633 | |
| 2634 | tp->nego_goal_offset = offset; |
| 2635 | tp->flags |= ESP_TGT_CHECK_NEGO; |
| 2636 | } |
| 2637 | |
| 2638 | static void esp_set_period(struct scsi_target *target, int period) |
| 2639 | { |
| 2640 | struct Scsi_Host *host = dev_to_shost(target->dev.parent); |
| 2641 | struct esp *esp = host_to_esp(host); |
| 2642 | struct esp_target_data *tp = &esp->target[target->id]; |
| 2643 | |
| 2644 | tp->nego_goal_period = period; |
| 2645 | tp->flags |= ESP_TGT_CHECK_NEGO; |
| 2646 | } |
| 2647 | |
| 2648 | static void esp_set_width(struct scsi_target *target, int width) |
| 2649 | { |
| 2650 | struct Scsi_Host *host = dev_to_shost(target->dev.parent); |
| 2651 | struct esp *esp = host_to_esp(host); |
| 2652 | struct esp_target_data *tp = &esp->target[target->id]; |
| 2653 | |
| 2654 | tp->nego_goal_width = (width ? 1 : 0); |
| 2655 | tp->flags |= ESP_TGT_CHECK_NEGO; |
| 2656 | } |
| 2657 | |
| 2658 | static struct spi_function_template esp_transport_ops = { |
| 2659 | .set_offset = esp_set_offset, |
| 2660 | .show_offset = 1, |
| 2661 | .set_period = esp_set_period, |
| 2662 | .show_period = 1, |
| 2663 | .set_width = esp_set_width, |
| 2664 | .show_width = 1, |
| 2665 | .get_signalling = esp_get_signalling, |
| 2666 | }; |
| 2667 | |
| 2668 | static int __init esp_init(void) |
| 2669 | { |
| 2670 | BUILD_BUG_ON(sizeof(struct scsi_pointer) < |
| 2671 | sizeof(struct esp_cmd_priv)); |
| 2672 | |
| 2673 | esp_transport_template = spi_attach_transport(&esp_transport_ops); |
| 2674 | if (!esp_transport_template) |
| 2675 | return -ENODEV; |
| 2676 | |
| 2677 | return 0; |
| 2678 | } |
| 2679 | |
| 2680 | static void __exit esp_exit(void) |
| 2681 | { |
| 2682 | spi_release_transport(esp_transport_template); |
| 2683 | } |
| 2684 | |
| 2685 | MODULE_DESCRIPTION("ESP SCSI driver core"); |
| 2686 | MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); |
| 2687 | MODULE_LICENSE("GPL"); |
| 2688 | MODULE_VERSION(DRV_VERSION); |
| 2689 | |
| 2690 | module_param(esp_bus_reset_settle, int, 0); |
| 2691 | MODULE_PARM_DESC(esp_bus_reset_settle, |
| 2692 | "ESP scsi bus reset delay in seconds"); |
| 2693 | |
| 2694 | module_param(esp_debug, int, 0); |
| 2695 | MODULE_PARM_DESC(esp_debug, |
| 2696 | "ESP bitmapped debugging message enable value:\n" |
| 2697 | " 0x00000001 Log interrupt events\n" |
| 2698 | " 0x00000002 Log scsi commands\n" |
| 2699 | " 0x00000004 Log resets\n" |
| 2700 | " 0x00000008 Log message in events\n" |
| 2701 | " 0x00000010 Log message out events\n" |
| 2702 | " 0x00000020 Log command completion\n" |
| 2703 | " 0x00000040 Log disconnects\n" |
| 2704 | " 0x00000080 Log data start\n" |
| 2705 | " 0x00000100 Log data done\n" |
| 2706 | " 0x00000200 Log reconnects\n" |
| 2707 | " 0x00000400 Log auto-sense data\n" |
| 2708 | ); |
| 2709 | |
| 2710 | module_init(esp_init); |
| 2711 | module_exit(esp_exit); |