blob: 1c88e051abf2a5c33e809e54c47a3479d114cbb0 [file] [log] [blame]
Giuliano Pochinidd7b2542006-06-28 13:53:41 +02001/****************************************************************************
2
3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4 All rights reserved
5 www.echoaudio.com
6
7 This file is part of Echo Digital Audio's generic driver library.
8
9 Echo Digital Audio's generic driver library is free software;
10 you can redistribute it and/or modify it under the terms of
11 the GNU General Public License as published by the Free Software
12 Foundation.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22 MA 02111-1307, USA.
23
24 ****************************************************************************
25
26 Translation from C++ and adaptation for use in ALSA-Driver
27 were made by Giuliano Pochini <pochini@shiny.it>
28
29 ****************************************************************************
30
31
32 Here's a block diagram of how most of the cards work:
33
34 +-----------+
35 record | |<-------------------- Inputs
36 <-------| | |
37 PCI | Transport | |
38 bus | engine | \|/
39 ------->| | +-------+
40 play | |--->|monitor|-------> Outputs
41 +-----------+ | mixer |
42 +-------+
43
44 The lines going to and from the PCI bus represent "pipes". A pipe performs
45 audio transport - moving audio data to and from buffers on the host via
46 bus mastering.
47
48 The inputs and outputs on the right represent input and output "busses."
49 A bus is a physical, real connection to the outside world. An example
50 of a bus would be the 1/4" analog connectors on the back of Layla or
51 an RCA S/PDIF connector.
52
53 For most cards, there is a one-to-one correspondence between outputs
54 and busses; that is, each individual pipe is hard-wired to a single bus.
55
56 Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
57 Layla24, Mona, and Indigo.
58
59
60 Mia has a feature called "virtual outputs."
61
62
63 +-----------+
64 record | |<----------------------------- Inputs
65 <-------| | |
66 PCI | Transport | |
67 bus | engine | \|/
68 ------->| | +------+ +-------+
69 play | |-->|vmixer|-->|monitor|-------> Outputs
70 +-----------+ +------+ | mixer |
71 +-------+
72
73
74 Obviously, the difference here is the box labeled "vmixer." Vmixer is
75 short for "virtual output mixer." For Mia, pipes are *not* hard-wired
76 to a single bus; the vmixer lets you mix any pipe to any bus in any
77 combination.
78
79 Note, however, that the left-hand side of the diagram is unchanged.
80 Transport works exactly the same way - the difference is in the mixer stage.
81
82
83 Pipes and busses are numbered starting at zero.
84
85
86
87 Pipe index
88 ==========
89
90 A number of calls in CEchoGals refer to a "pipe index". A pipe index is
91 a unique number for a pipe that unambiguously refers to a playback or record
92 pipe. Pipe indices are numbered starting with analog outputs, followed by
93 digital outputs, then analog inputs, then digital inputs.
94
95 Take Gina24 as an example:
96
97 Pipe index
98
99 0-7 Analog outputs (0 .. FirstDigitalBusOut-1)
100 8-15 Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
101 16-17 Analog inputs
102 18-25 Digital inputs
103
104
105 You get the pipe index by calling CEchoGals::OpenAudio; the other transport
106 functions take the pipe index as a parameter. If you need a pipe index for
107 some other reason, use the handy Makepipe_index method.
108
109
110 Some calls take a CChannelMask parameter; CChannelMask is a handy way to
111 group pipe indices.
112
113
114
115 Digital mode switch
116 ===================
117
118 Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
119 or DMS. Cards with a DMS can be set to one of three mutually exclusive
120 digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
121
122 This may create some confusion since ADAT optical is 8 channels wide and
123 S/PDIF is only two channels wide. Gina24, Layla24, and Mona handle this
124 by acting as if they always have 8 digital outs and ins. If you are in
125 either S/PDIF mode, the last 6 channels don't do anything - data sent
126 out these channels is thrown away and you will always record zeros.
127
128 Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
129 only available if you have the card configured for S/PDIF optical or S/PDIF
130 RCA.
131
132
133
134 Double speed mode
135 =================
136
137 Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
138 Layla24, Mona, Mia, and Indigo). For these cards, the driver sometimes has
139 to worry about "double speed mode"; double speed mode applies whenever the
140 sampling rate is above 50 kHz.
141
142 For instance, Mona and Layla24 support word clock sync. However, they
143 actually support two different word clock modes - single speed (below
144 50 kHz) and double speed (above 50 kHz). The hardware detects if a single
145 or double speed word clock signal is present; the generic code uses that
146 information to determine which mode to use.
147
148 The generic code takes care of all this for you.
149*/
150
151
152#ifndef _ECHOAUDIO_H_
153#define _ECHOAUDIO_H_
154
155
156#define TRUE 1
157#define FALSE 0
158
159#include "echoaudio_dsp.h"
160
161
162
163/***********************************************************************
164
165 PCI configuration space
166
167***********************************************************************/
168
169/*
170 * PCI vendor ID and device IDs for the hardware
171 */
172#define VENDOR_ID 0x1057
173#define DEVICE_ID_56301 0x1801
174#define DEVICE_ID_56361 0x3410
175#define SUBVENDOR_ID 0xECC0
176
177
178/*
179 * Valid Echo PCI subsystem card IDs
180 */
181#define DARLA20 0x0010
182#define GINA20 0x0020
183#define LAYLA20 0x0030
184#define DARLA24 0x0040
185#define GINA24 0x0050
186#define LAYLA24 0x0060
187#define MONA 0x0070
188#define MIA 0x0080
189#define INDIGO 0x0090
190#define INDIGO_IO 0x00a0
191#define INDIGO_DJ 0x00b0
192#define ECHO3G 0x0100
193
194
195/************************************************************************
196
197 Array sizes and so forth
198
199***********************************************************************/
200
201/*
202 * Sizes
203 */
204#define ECHO_MAXAUDIOINPUTS 32 /* Max audio input channels */
205#define ECHO_MAXAUDIOOUTPUTS 32 /* Max audio output channels */
206#define ECHO_MAXAUDIOPIPES 32 /* Max number of input and output
207 * pipes */
208#define E3G_MAX_OUTPUTS 16
209#define ECHO_MAXMIDIJACKS 1 /* Max MIDI ports */
210#define ECHO_MIDI_QUEUE_SZ 512 /* Max MIDI input queue entries */
211#define ECHO_MTC_QUEUE_SZ 32 /* Max MIDI time code input queue
212 * entries */
213
214/*
215 * MIDI activity indicator timeout
216 */
217#define MIDI_ACTIVITY_TIMEOUT_USEC 200000
218
219
220/****************************************************************************
221
222 Clocks
223
224*****************************************************************************/
225
226/*
227 * Clock numbers
228 */
229#define ECHO_CLOCK_INTERNAL 0
230#define ECHO_CLOCK_WORD 1
231#define ECHO_CLOCK_SUPER 2
232#define ECHO_CLOCK_SPDIF 3
233#define ECHO_CLOCK_ADAT 4
234#define ECHO_CLOCK_ESYNC 5
235#define ECHO_CLOCK_ESYNC96 6
236#define ECHO_CLOCK_MTC 7
237#define ECHO_CLOCK_NUMBER 8
238#define ECHO_CLOCKS 0xffff
239
240/*
241 * Clock bit numbers - used to report capabilities and whatever clocks
242 * are being detected dynamically.
243 */
244#define ECHO_CLOCK_BIT_INTERNAL (1 << ECHO_CLOCK_INTERNAL)
245#define ECHO_CLOCK_BIT_WORD (1 << ECHO_CLOCK_WORD)
246#define ECHO_CLOCK_BIT_SUPER (1 << ECHO_CLOCK_SUPER)
247#define ECHO_CLOCK_BIT_SPDIF (1 << ECHO_CLOCK_SPDIF)
248#define ECHO_CLOCK_BIT_ADAT (1 << ECHO_CLOCK_ADAT)
249#define ECHO_CLOCK_BIT_ESYNC (1 << ECHO_CLOCK_ESYNC)
250#define ECHO_CLOCK_BIT_ESYNC96 (1 << ECHO_CLOCK_ESYNC96)
251#define ECHO_CLOCK_BIT_MTC (1<<ECHO_CLOCK_MTC)
252
253
254/***************************************************************************
255
256 Digital modes
257
258****************************************************************************/
259
260/*
261 * Digital modes for Mona, Layla24, and Gina24
262 */
263#define DIGITAL_MODE_NONE 0xFF
264#define DIGITAL_MODE_SPDIF_RCA 0
265#define DIGITAL_MODE_SPDIF_OPTICAL 1
266#define DIGITAL_MODE_ADAT 2
267#define DIGITAL_MODE_SPDIF_CDROM 3
268#define DIGITAL_MODES 4
269
270/*
271 * Digital mode capability masks
272 */
273#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA (1 << DIGITAL_MODE_SPDIF_RCA)
274#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL (1 << DIGITAL_MODE_SPDIF_OPTICAL)
275#define ECHOCAPS_HAS_DIGITAL_MODE_ADAT (1 << DIGITAL_MODE_ADAT)
276#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM (1 << DIGITAL_MODE_SPDIF_CDROM)
277
278
279#define EXT_3GBOX_NC 0x01 /* 3G box not connected */
280#define EXT_3GBOX_NOT_SET 0x02 /* 3G box not detected yet */
281
282
283#define ECHOGAIN_MUTED (-128) /* Minimum possible gain */
284#define ECHOGAIN_MINOUT (-128) /* Min output gain (dB) */
285#define ECHOGAIN_MAXOUT (6) /* Max output gain (dB) */
286#define ECHOGAIN_MININP (-50) /* Min input gain (0.5 dB) */
287#define ECHOGAIN_MAXINP (50) /* Max input gain (0.5 dB) */
288
289#define PIPE_STATE_STOPPED 0 /* Pipe has been reset */
290#define PIPE_STATE_PAUSED 1 /* Pipe has been stopped */
291#define PIPE_STATE_STARTED 2 /* Pipe has been started */
292#define PIPE_STATE_PENDING 3 /* Pipe has pending start */
293
294
295/* Debug initialization */
296#ifdef CONFIG_SND_DEBUG
297#define DE_INIT(x) snd_printk x
298#else
299#define DE_INIT(x)
300#endif
301
302/* Debug hw_params callbacks */
303#ifdef CONFIG_SND_DEBUG
304#define DE_HWP(x) snd_printk x
305#else
306#define DE_HWP(x)
307#endif
308
309/* Debug normal activity (open, start, stop...) */
310#ifdef CONFIG_SND_DEBUG
311#define DE_ACT(x) snd_printk x
312#else
313#define DE_ACT(x)
314#endif
315
316/* Debug midi activity */
317#ifdef CONFIG_SND_DEBUG
318#define DE_MID(x) snd_printk x
319#else
320#define DE_MID(x)
321#endif
322
323
324struct audiopipe {
325 volatile u32 *dma_counter; /* Commpage register that contains
326 * the current dma position
327 * (lower 32 bits only)
328 */
329 u32 last_counter; /* The last position, which is used
330 * to compute...
331 */
332 u32 position; /* ...the number of bytes tranferred
333 * by the DMA engine, modulo the
334 * buffer size
335 */
336 short index; /* Index of the first channel or <0
337 * if hw is not configured yet
338 */
339 short interleave;
340 struct snd_dma_buffer sgpage; /* Room for the scatter-gather list */
341 struct snd_pcm_hardware hw;
342 struct snd_pcm_hw_constraint_list constr;
343 short sglist_head;
344 char state; /* pipe state */
345};
346
347
348struct audioformat {
349 u8 interleave; /* How the data is arranged in memory:
350 * mono = 1, stereo = 2, ...
351 */
352 u8 bits_per_sample; /* 8, 16, 24, 32 (24 bits left aligned) */
353 char mono_to_stereo; /* Only used if interleave is 1 and
354 * if this is an output pipe.
355 */
356 char data_are_bigendian; /* 1 = big endian, 0 = little endian */
357};
358
359
360struct echoaudio {
361 spinlock_t lock;
362 struct snd_pcm_substream *substream[DSP_MAXPIPES];
363 int last_period[DSP_MAXPIPES];
Takashi Iwaibefceea2007-12-03 17:08:40 +0100364 struct mutex mode_mutex;
Giuliano Pochinidd7b2542006-06-28 13:53:41 +0200365 u16 num_digital_modes, digital_mode_list[6];
366 u16 num_clock_sources, clock_source_list[10];
367 atomic_t opencount;
368 struct snd_kcontrol *clock_src_ctl;
369 struct snd_pcm *analog_pcm, *digital_pcm;
370 struct snd_card *card;
371 const char *card_name;
372 struct pci_dev *pci;
373 unsigned long dsp_registers_phys;
374 struct resource *iores;
375 struct snd_dma_buffer commpage_dma_buf;
376 int irq;
377#ifdef ECHOCARD_HAS_MIDI
378 struct snd_rawmidi *rmidi;
379 struct snd_rawmidi_substream *midi_in, *midi_out;
380#endif
381 struct timer_list timer;
382 char tinuse; /* Timer in use */
383 char midi_full; /* MIDI output buffer is full */
384 char can_set_rate;
385 char rate_set;
386
387 /* This stuff is used mainly by the lowlevel code */
388 struct comm_page *comm_page; /* Virtual address of the memory
389 * seen by DSP
390 */
391 u32 pipe_alloc_mask; /* Bitmask of allocated pipes */
392 u32 pipe_cyclic_mask; /* Bitmask of pipes with cyclic
393 * buffers
394 */
395 u32 sample_rate; /* Card sample rate in Hz */
396 u8 digital_mode; /* Current digital mode
397 * (see DIGITAL_MODE_*)
398 */
399 u8 spdif_status; /* Gina20, Darla20, Darla24 - only */
400 u8 clock_state; /* Gina20, Darla20, Darla24 - only */
401 u8 input_clock; /* Currently selected sample clock
402 * source
403 */
404 u8 output_clock; /* Layla20 only */
405 char meters_enabled; /* VU-meters status */
406 char asic_loaded; /* Set TRUE when ASIC loaded */
407 char bad_board; /* Set TRUE if DSP won't load */
408 char professional_spdif; /* 0 = consumer; 1 = professional */
409 char non_audio_spdif; /* 3G - only */
410 char digital_in_automute; /* Gina24, Layla24, Mona - only */
411 char has_phantom_power;
412 char hasnt_input_nominal_level; /* Gina3G */
413 char phantom_power; /* Gina3G - only */
414 char has_midi;
415 char midi_input_enabled;
416
417#ifdef ECHOCARD_ECHO3G
418 /* External module -dependent pipe and bus indexes */
419 char px_digital_out, px_analog_in, px_digital_in, px_num;
420 char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
421#endif
422
423 char nominal_level[ECHO_MAXAUDIOPIPES]; /* True == -10dBV
424 * False == +4dBu */
425 s8 input_gain[ECHO_MAXAUDIOINPUTS]; /* Input level -50..+50
426 * unit is 0.5dB */
427 s8 output_gain[ECHO_MAXAUDIOOUTPUTS]; /* Output level -128..+6 dB
428 * (-128=muted) */
429 s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
430 /* -128..+6 dB */
431 s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
432 /* -128..+6 dB */
433
434 u16 digital_modes; /* Bitmask of supported modes
435 * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
436 u16 input_clock_types; /* Suppoted input clock types */
437 u16 output_clock_types; /* Suppoted output clock types -
438 * Layla20 only */
439 u16 device_id, subdevice_id;
440 u16 *dsp_code; /* Current DSP code loaded,
441 * NULL if nothing loaded */
442 const struct firmware *dsp_code_to_load;/* DSP code to load */
443 const struct firmware *asic_code; /* Current ASIC code */
444 u32 comm_page_phys; /* Physical address of the
445 * memory seen by DSP */
446 volatile u32 __iomem *dsp_registers; /* DSP's register base */
447 u32 active_mask; /* Chs. active mask or
448 * punks out */
449
450#ifdef ECHOCARD_HAS_MIDI
451 u16 mtc_state; /* State for MIDI input parsing state machine */
452 u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
453#endif
454};
455
456
457static int init_dsp_comm_page(struct echoaudio *chip);
458static int init_line_levels(struct echoaudio *chip);
459static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
460static int load_firmware(struct echoaudio *chip);
461static int wait_handshake(struct echoaudio *chip);
462static int send_vector(struct echoaudio *chip, u32 command);
463static int get_firmware(const struct firmware **fw_entry,
464 const struct firmware *frm, struct echoaudio *chip);
465static void free_firmware(const struct firmware *fw_entry);
466
467#ifdef ECHOCARD_HAS_MIDI
468static int enable_midi_input(struct echoaudio *chip, char enable);
469static int midi_service_irq(struct echoaudio *chip);
470static int __devinit snd_echo_midi_create(struct snd_card *card,
471 struct echoaudio *chip);
472#endif
473
474
475static inline void clear_handshake(struct echoaudio *chip)
476{
477 chip->comm_page->handshake = 0;
478}
479
480static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
481{
482 return readl(&chip->dsp_registers[index]);
483}
484
485static inline void set_dsp_register(struct echoaudio *chip, u32 index,
486 u32 value)
487{
488 writel(value, &chip->dsp_registers[index]);
489}
490
491
492/* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
493for 3G cards because they depend on the external box. They are integer
494constants for all other cards.
495Never use those defines directly, use the following functions instead. */
496
497static inline int px_digital_out(const struct echoaudio *chip)
498{
499 return PX_DIGITAL_OUT;
500}
501
502static inline int px_analog_in(const struct echoaudio *chip)
503{
504 return PX_ANALOG_IN;
505}
506
507static inline int px_digital_in(const struct echoaudio *chip)
508{
509 return PX_DIGITAL_IN;
510}
511
512static inline int px_num(const struct echoaudio *chip)
513{
514 return PX_NUM;
515}
516
517static inline int bx_digital_out(const struct echoaudio *chip)
518{
519 return BX_DIGITAL_OUT;
520}
521
522static inline int bx_analog_in(const struct echoaudio *chip)
523{
524 return BX_ANALOG_IN;
525}
526
527static inline int bx_digital_in(const struct echoaudio *chip)
528{
529 return BX_DIGITAL_IN;
530}
531
532static inline int bx_num(const struct echoaudio *chip)
533{
534 return BX_NUM;
535}
536
537static inline int num_pipes_out(const struct echoaudio *chip)
538{
539 return px_analog_in(chip);
540}
541
542static inline int num_pipes_in(const struct echoaudio *chip)
543{
544 return px_num(chip) - px_analog_in(chip);
545}
546
547static inline int num_busses_out(const struct echoaudio *chip)
548{
549 return bx_analog_in(chip);
550}
551
552static inline int num_busses_in(const struct echoaudio *chip)
553{
554 return bx_num(chip) - bx_analog_in(chip);
555}
556
557static inline int num_analog_busses_out(const struct echoaudio *chip)
558{
559 return bx_digital_out(chip);
560}
561
562static inline int num_analog_busses_in(const struct echoaudio *chip)
563{
564 return bx_digital_in(chip) - bx_analog_in(chip);
565}
566
567static inline int num_digital_busses_out(const struct echoaudio *chip)
568{
569 return num_busses_out(chip) - num_analog_busses_out(chip);
570}
571
572static inline int num_digital_busses_in(const struct echoaudio *chip)
573{
574 return num_busses_in(chip) - num_analog_busses_in(chip);
575}
576
577/* The monitor array is a one-dimensional array; compute the offset
578 * into the array */
579static inline int monitor_index(const struct echoaudio *chip, int out, int in)
580{
581 return out * num_busses_in(chip) + in;
582}
583
584
585#ifndef pci_device
586#define pci_device(chip) (&chip->pci->dev)
587#endif
588
589
590#endif /* _ECHOAUDIO_H_ */