blob: ba012c2bdf7a3b8ceb136f32d0d24cede5037725 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Flash memory interface rev.5 driver for the Intel
3 * Flash chips used on the NetWinder.
4 *
5 * 20/08/2000 RMK use __ioremap to map flash into virtual memory
6 * make a few more places use "volatile"
7 * 22/05/2001 RMK - Lock read against write
8 * - merge printk level changes (with mods) from Alan Cox.
9 * - use *ppos as the file position, not file->f_pos.
10 * - fix check for out of range pos and r/w size
11 *
12 * Please note that we are tampering with the only flash chip in the
13 * machine, which contains the bootup code. We therefore have the
14 * power to convert these machines into doorstops...
15 */
16
17#include <linux/module.h>
18#include <linux/types.h>
19#include <linux/fs.h>
20#include <linux/errno.h>
21#include <linux/mm.h>
22#include <linux/delay.h>
23#include <linux/proc_fs.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070024#include <linux/miscdevice.h>
25#include <linux/spinlock.h>
26#include <linux/rwsem.h>
27#include <linux/init.h>
28#include <linux/smp_lock.h>
Ingo Molnar6f87f0d2006-03-23 03:00:27 -080029#include <linux/mutex.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070030
31#include <asm/hardware/dec21285.h>
32#include <asm/io.h>
33#include <asm/leds.h>
34#include <asm/mach-types.h>
35#include <asm/system.h>
36#include <asm/uaccess.h>
37
38/*****************************************************************************/
39#include <asm/nwflash.h>
40
41#define NWFLASH_VERSION "6.4"
42
43static void kick_open(void);
44static int get_flash_id(void);
45static int erase_block(int nBlock);
46static int write_block(unsigned long p, const char __user *buf, int count);
47
48#define KFLASH_SIZE 1024*1024 //1 Meg
49#define KFLASH_SIZE4 4*1024*1024 //4 Meg
50#define KFLASH_ID 0x89A6 //Intel flash
51#define KFLASH_ID4 0xB0D4 //Intel flash 4Meg
52
53static int flashdebug; //if set - we will display progress msgs
54
55static int gbWriteEnable;
56static int gbWriteBase64Enable;
57static volatile unsigned char *FLASH_BASE;
58static int gbFlashSize = KFLASH_SIZE;
Ingo Molnar6f87f0d2006-03-23 03:00:27 -080059static DEFINE_MUTEX(nwflash_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -070060
61extern spinlock_t gpio_lock;
62
63static int get_flash_id(void)
64{
65 volatile unsigned int c1, c2;
66
67 /*
68 * try to get flash chip ID
69 */
70 kick_open();
71 c2 = inb(0x80);
72 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x90;
73 udelay(15);
74 c1 = *(volatile unsigned char *) FLASH_BASE;
75 c2 = inb(0x80);
76
77 /*
78 * on 4 Meg flash the second byte is actually at offset 2...
79 */
80 if (c1 == 0xB0)
81 c2 = *(volatile unsigned char *) (FLASH_BASE + 2);
82 else
83 c2 = *(volatile unsigned char *) (FLASH_BASE + 1);
84
85 c2 += (c1 << 8);
86
87 /*
88 * set it back to read mode
89 */
90 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
91
92 if (c2 == KFLASH_ID4)
93 gbFlashSize = KFLASH_SIZE4;
94
95 return c2;
96}
97
98static int flash_ioctl(struct inode *inodep, struct file *filep, unsigned int cmd, unsigned long arg)
99{
100 switch (cmd) {
101 case CMD_WRITE_DISABLE:
102 gbWriteBase64Enable = 0;
103 gbWriteEnable = 0;
104 break;
105
106 case CMD_WRITE_ENABLE:
107 gbWriteEnable = 1;
108 break;
109
110 case CMD_WRITE_BASE64K_ENABLE:
111 gbWriteBase64Enable = 1;
112 break;
113
114 default:
115 gbWriteBase64Enable = 0;
116 gbWriteEnable = 0;
117 return -EINVAL;
118 }
119 return 0;
120}
121
122static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
123 loff_t *ppos)
124{
125 unsigned long p = *ppos;
126 unsigned int count = size;
127 int ret = 0;
128
129 if (flashdebug)
130 printk(KERN_DEBUG "flash_read: flash_read: offset=0x%lX, "
131 "buffer=%p, count=0x%X.\n", p, buf, count);
132
133 if (count)
134 ret = -ENXIO;
135
136 if (p < gbFlashSize) {
137 if (count > gbFlashSize - p)
138 count = gbFlashSize - p;
139
140 /*
141 * We now lock against reads and writes. --rmk
142 */
Ingo Molnar6f87f0d2006-03-23 03:00:27 -0800143 if (mutex_lock_interruptible(&nwflash_mutex))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144 return -ERESTARTSYS;
145
146 ret = copy_to_user(buf, (void *)(FLASH_BASE + p), count);
147 if (ret == 0) {
148 ret = count;
149 *ppos += count;
150 } else
151 ret = -EFAULT;
Ingo Molnar6f87f0d2006-03-23 03:00:27 -0800152 mutex_unlock(&nwflash_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153 }
154 return ret;
155}
156
157static ssize_t flash_write(struct file *file, const char __user *buf,
158 size_t size, loff_t * ppos)
159{
160 unsigned long p = *ppos;
161 unsigned int count = size;
162 int written;
163 int nBlock, temp, rc;
164 int i, j;
165
166 if (flashdebug)
167 printk("flash_write: offset=0x%lX, buffer=0x%p, count=0x%X.\n",
168 p, buf, count);
169
170 if (!gbWriteEnable)
171 return -EINVAL;
172
173 if (p < 64 * 1024 && (!gbWriteBase64Enable))
174 return -EINVAL;
175
176 /*
177 * check for out of range pos or count
178 */
179 if (p >= gbFlashSize)
180 return count ? -ENXIO : 0;
181
182 if (count > gbFlashSize - p)
183 count = gbFlashSize - p;
184
185 if (!access_ok(VERIFY_READ, buf, count))
186 return -EFAULT;
187
188 /*
189 * We now lock against reads and writes. --rmk
190 */
Ingo Molnar6f87f0d2006-03-23 03:00:27 -0800191 if (mutex_lock_interruptible(&nwflash_mutex))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192 return -ERESTARTSYS;
193
194 written = 0;
195
196 leds_event(led_claim);
197 leds_event(led_green_on);
198
199 nBlock = (int) p >> 16; //block # of 64K bytes
200
201 /*
202 * # of 64K blocks to erase and write
203 */
204 temp = ((int) (p + count) >> 16) - nBlock + 1;
205
206 /*
207 * write ends at exactly 64k boundary?
208 */
209 if (((int) (p + count) & 0xFFFF) == 0)
210 temp -= 1;
211
212 if (flashdebug)
213 printk(KERN_DEBUG "flash_write: writing %d block(s) "
214 "starting at %d.\n", temp, nBlock);
215
216 for (; temp; temp--, nBlock++) {
217 if (flashdebug)
218 printk(KERN_DEBUG "flash_write: erasing block %d.\n", nBlock);
219
220 /*
221 * first we have to erase the block(s), where we will write...
222 */
223 i = 0;
224 j = 0;
225 RetryBlock:
226 do {
227 rc = erase_block(nBlock);
228 i++;
229 } while (rc && i < 10);
230
231 if (rc) {
232 printk(KERN_ERR "flash_write: erase error %x\n", rc);
233 break;
234 }
235 if (flashdebug)
236 printk(KERN_DEBUG "flash_write: writing offset %lX, "
237 "from buf %p, bytes left %X.\n", p, buf,
238 count - written);
239
240 /*
241 * write_block will limit write to space left in this block
242 */
243 rc = write_block(p, buf, count - written);
244 j++;
245
246 /*
247 * if somehow write verify failed? Can't happen??
248 */
249 if (!rc) {
250 /*
251 * retry up to 10 times
252 */
253 if (j < 10)
254 goto RetryBlock;
255 else
256 /*
257 * else quit with error...
258 */
259 rc = -1;
260
261 }
262 if (rc < 0) {
263 printk(KERN_ERR "flash_write: write error %X\n", rc);
264 break;
265 }
266 p += rc;
267 buf += rc;
268 written += rc;
269 *ppos += rc;
270
271 if (flashdebug)
272 printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
273 }
274
275 /*
276 * restore reg on exit
277 */
278 leds_event(led_release);
279
Ingo Molnar6f87f0d2006-03-23 03:00:27 -0800280 mutex_unlock(&nwflash_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700281
282 return written;
283}
284
285
286/*
287 * The memory devices use the full 32/64 bits of the offset, and so we cannot
288 * check against negative addresses: they are ok. The return value is weird,
289 * though, in that case (0).
290 *
291 * also note that seeking relative to the "end of file" isn't supported:
292 * it has no meaning, so it returns -EINVAL.
293 */
294static loff_t flash_llseek(struct file *file, loff_t offset, int orig)
295{
296 loff_t ret;
297
298 lock_kernel();
299 if (flashdebug)
300 printk(KERN_DEBUG "flash_llseek: offset=0x%X, orig=0x%X.\n",
301 (unsigned int) offset, orig);
302
303 switch (orig) {
304 case 0:
305 if (offset < 0) {
306 ret = -EINVAL;
307 break;
308 }
309
310 if ((unsigned int) offset > gbFlashSize) {
311 ret = -EINVAL;
312 break;
313 }
314
315 file->f_pos = (unsigned int) offset;
316 ret = file->f_pos;
317 break;
318 case 1:
319 if ((file->f_pos + offset) > gbFlashSize) {
320 ret = -EINVAL;
321 break;
322 }
323 if ((file->f_pos + offset) < 0) {
324 ret = -EINVAL;
325 break;
326 }
327 file->f_pos += offset;
328 ret = file->f_pos;
329 break;
330 default:
331 ret = -EINVAL;
332 }
333 unlock_kernel();
334 return ret;
335}
336
337
338/*
339 * assume that main Write routine did the parameter checking...
340 * so just go ahead and erase, what requested!
341 */
342
343static int erase_block(int nBlock)
344{
345 volatile unsigned int c1;
346 volatile unsigned char *pWritePtr;
347 unsigned long timeout;
348 int temp, temp1;
349
350 /*
351 * orange LED == erase
352 */
353 leds_event(led_amber_on);
354
355 /*
356 * reset footbridge to the correct offset 0 (...0..3)
357 */
358 *CSR_ROMWRITEREG = 0;
359
360 /*
361 * dummy ROM read
362 */
363 c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
364
365 kick_open();
366 /*
367 * reset status if old errors
368 */
369 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
370
371 /*
372 * erase a block...
373 * aim at the middle of a current block...
374 */
375 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + 0x8000 + (nBlock << 16)));
376 /*
377 * dummy read
378 */
379 c1 = *pWritePtr;
380
381 kick_open();
382 /*
383 * erase
384 */
385 *(volatile unsigned char *) pWritePtr = 0x20;
386
387 /*
388 * confirm
389 */
390 *(volatile unsigned char *) pWritePtr = 0xD0;
391
392 /*
393 * wait 10 ms
394 */
395 msleep(10);
396
397 /*
398 * wait while erasing in process (up to 10 sec)
399 */
400 timeout = jiffies + 10 * HZ;
401 c1 = 0;
402 while (!(c1 & 0x80) && time_before(jiffies, timeout)) {
403 msleep(10);
404 /*
405 * read any address
406 */
407 c1 = *(volatile unsigned char *) (pWritePtr);
408 // printk("Flash_erase: status=%X.\n",c1);
409 }
410
411 /*
412 * set flash for normal read access
413 */
414 kick_open();
415// *(volatile unsigned char*)(FLASH_BASE+0x8000) = 0xFF;
416 *(volatile unsigned char *) pWritePtr = 0xFF; //back to normal operation
417
418 /*
419 * check if erase errors were reported
420 */
421 if (c1 & 0x20) {
422 printk(KERN_ERR "flash_erase: err at %p\n", pWritePtr);
423
424 /*
425 * reset error
426 */
427 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
428 return -2;
429 }
430
431 /*
432 * just to make sure - verify if erased OK...
433 */
434 msleep(10);
435
436 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + (nBlock << 16)));
437
438 for (temp = 0; temp < 16 * 1024; temp++, pWritePtr += 4) {
439 if ((temp1 = *(volatile unsigned int *) pWritePtr) != 0xFFFFFFFF) {
440 printk(KERN_ERR "flash_erase: verify err at %p = %X\n",
441 pWritePtr, temp1);
442 return -1;
443 }
444 }
445
446 return 0;
447
448}
449
450/*
451 * write_block will limit number of bytes written to the space in this block
452 */
453static int write_block(unsigned long p, const char __user *buf, int count)
454{
455 volatile unsigned int c1;
456 volatile unsigned int c2;
457 unsigned char *pWritePtr;
458 unsigned int uAddress;
459 unsigned int offset;
460 unsigned long timeout;
461 unsigned long timeout1;
462
463 /*
464 * red LED == write
465 */
466 leds_event(led_amber_off);
467 leds_event(led_red_on);
468
469 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
470
471 /*
472 * check if write will end in this block....
473 */
474 offset = p & 0xFFFF;
475
476 if (offset + count > 0x10000)
477 count = 0x10000 - offset;
478
479 /*
480 * wait up to 30 sec for this block
481 */
482 timeout = jiffies + 30 * HZ;
483
484 for (offset = 0; offset < count; offset++, pWritePtr++) {
485 uAddress = (unsigned int) pWritePtr;
486 uAddress &= 0xFFFFFFFC;
487 if (__get_user(c2, buf + offset))
488 return -EFAULT;
489
490 WriteRetry:
491 /*
492 * dummy read
493 */
494 c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
495
496 /*
497 * kick open the write gate
498 */
499 kick_open();
500
501 /*
502 * program footbridge to the correct offset...0..3
503 */
504 *CSR_ROMWRITEREG = (unsigned int) pWritePtr & 3;
505
506 /*
507 * write cmd
508 */
509 *(volatile unsigned char *) (uAddress) = 0x40;
510
511 /*
512 * data to write
513 */
514 *(volatile unsigned char *) (uAddress) = c2;
515
516 /*
517 * get status
518 */
519 *(volatile unsigned char *) (FLASH_BASE + 0x10000) = 0x70;
520
521 c1 = 0;
522
523 /*
524 * wait up to 1 sec for this byte
525 */
526 timeout1 = jiffies + 1 * HZ;
527
528 /*
529 * while not ready...
530 */
531 while (!(c1 & 0x80) && time_before(jiffies, timeout1))
532 c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
533
534 /*
535 * if timeout getting status
536 */
537 if (time_after_eq(jiffies, timeout1)) {
538 kick_open();
539 /*
540 * reset err
541 */
542 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
543
544 goto WriteRetry;
545 }
546 /*
547 * switch on read access, as a default flash operation mode
548 */
549 kick_open();
550 /*
551 * read access
552 */
553 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
554
555 /*
556 * if hardware reports an error writing, and not timeout -
557 * reset the chip and retry
558 */
559 if (c1 & 0x10) {
560 kick_open();
561 /*
562 * reset err
563 */
564 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
565
566 /*
567 * before timeout?
568 */
569 if (time_before(jiffies, timeout)) {
570 if (flashdebug)
571 printk(KERN_DEBUG "write_block: Retrying write at 0x%X)n",
572 pWritePtr - FLASH_BASE);
573
574 /*
575 * no LED == waiting
576 */
577 leds_event(led_amber_off);
578 /*
579 * wait couple ms
580 */
581 msleep(10);
582 /*
583 * red LED == write
584 */
585 leds_event(led_red_on);
586
587 goto WriteRetry;
588 } else {
589 printk(KERN_ERR "write_block: timeout at 0x%X\n",
590 pWritePtr - FLASH_BASE);
591 /*
592 * return error -2
593 */
594 return -2;
595
596 }
597 }
598 }
599
600 /*
601 * green LED == read/verify
602 */
603 leds_event(led_amber_off);
604 leds_event(led_green_on);
605
606 msleep(10);
607
608 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
609
610 for (offset = 0; offset < count; offset++) {
611 char c, c1;
612 if (__get_user(c, buf))
613 return -EFAULT;
614 buf++;
615 if ((c1 = *pWritePtr++) != c) {
616 printk(KERN_ERR "write_block: verify error at 0x%X (%02X!=%02X)\n",
617 pWritePtr - FLASH_BASE, c1, c);
618 return 0;
619 }
620 }
621
622 return count;
623}
624
625
626static void kick_open(void)
627{
628 unsigned long flags;
629
630 /*
631 * we want to write a bit pattern XXX1 to Xilinx to enable
632 * the write gate, which will be open for about the next 2ms.
633 */
634 spin_lock_irqsave(&gpio_lock, flags);
635 cpld_modify(1, 1);
636 spin_unlock_irqrestore(&gpio_lock, flags);
637
638 /*
639 * let the ISA bus to catch on...
640 */
641 udelay(25);
642}
643
Arjan van de Ven62322d22006-07-03 00:24:21 -0700644static const struct file_operations flash_fops =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700645{
646 .owner = THIS_MODULE,
647 .llseek = flash_llseek,
648 .read = flash_read,
649 .write = flash_write,
650 .ioctl = flash_ioctl,
651};
652
653static struct miscdevice flash_miscdev =
654{
655 FLASH_MINOR,
656 "nwflash",
657 &flash_fops
658};
659
660static int __init nwflash_init(void)
661{
662 int ret = -ENODEV;
663
664 if (machine_is_netwinder()) {
665 int id;
666
667 FLASH_BASE = ioremap(DC21285_FLASH, KFLASH_SIZE4);
668 if (!FLASH_BASE)
669 goto out;
670
671 id = get_flash_id();
672 if ((id != KFLASH_ID) && (id != KFLASH_ID4)) {
673 ret = -ENXIO;
674 iounmap((void *)FLASH_BASE);
675 printk("Flash: incorrect ID 0x%04X.\n", id);
676 goto out;
677 }
678
679 printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n",
680 NWFLASH_VERSION, id, gbFlashSize / (1024 * 1024));
681
682 ret = misc_register(&flash_miscdev);
683 if (ret < 0) {
684 iounmap((void *)FLASH_BASE);
685 }
686 }
687out:
688 return ret;
689}
690
691static void __exit nwflash_exit(void)
692{
693 misc_deregister(&flash_miscdev);
694 iounmap((void *)FLASH_BASE);
695}
696
697MODULE_LICENSE("GPL");
698
699module_param(flashdebug, bool, 0644);
700
701module_init(nwflash_init);
702module_exit(nwflash_exit);