| Thomas Petazzoni | 1bffb4a | 2012-11-16 16:39:45 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| 3 | * |
| 4 | * This file is licensed under the terms of the GNU General Public |
| 5 | * License version 2. This program is licensed "as is" without any |
| 6 | * warranty of any kind, whether express or implied. |
| 7 | */ |
| 8 | |
| 9 | /include/ "skeleton.dtsi" |
| 10 | |
| 11 | / { |
| 12 | model = "Marvell Orion5x SoC"; |
| 13 | compatible = "marvell,orion5x"; |
| 14 | interrupt-parent = <&intc>; |
| 15 | |
| 16 | intc: interrupt-controller { |
| 17 | compatible = "marvell,orion-intc", "marvell,intc"; |
| 18 | interrupt-controller; |
| 19 | #interrupt-cells = <1>; |
| 20 | reg = <0xf1020204 0x04>; |
| 21 | }; |
| 22 | |
| 23 | ocp@f1000000 { |
| 24 | compatible = "simple-bus"; |
| 25 | ranges = <0x00000000 0xf1000000 0x4000000 |
| 26 | 0xf2200000 0xf2200000 0x0000800>; |
| 27 | #address-cells = <1>; |
| 28 | #size-cells = <1>; |
| 29 | |
| 30 | gpio0: gpio@10100 { |
| 31 | compatible = "marvell,orion-gpio"; |
| 32 | #gpio-cells = <2>; |
| 33 | gpio-controller; |
| 34 | reg = <0x10100 0x40>; |
| 35 | ngpio = <32>; |
| 36 | interrupts = <6>, <7>, <8>, <9>; |
| 37 | }; |
| 38 | |
| 39 | serial@12000 { |
| 40 | compatible = "ns16550a"; |
| 41 | reg = <0x12000 0x100>; |
| 42 | reg-shift = <2>; |
| 43 | interrupts = <3>; |
| 44 | /* set clock-frequency in board dts */ |
| 45 | status = "disabled"; |
| 46 | }; |
| 47 | |
| 48 | serial@12100 { |
| 49 | compatible = "ns16550a"; |
| 50 | reg = <0x12100 0x100>; |
| 51 | reg-shift = <2>; |
| 52 | interrupts = <4>; |
| 53 | /* set clock-frequency in board dts */ |
| 54 | status = "disabled"; |
| 55 | }; |
| 56 | |
| 57 | spi@10600 { |
| 58 | compatible = "marvell,orion-spi"; |
| 59 | #address-cells = <1>; |
| 60 | #size-cells = <0>; |
| 61 | cell-index = <0>; |
| 62 | reg = <0x10600 0x28>; |
| 63 | status = "disabled"; |
| 64 | }; |
| 65 | |
| 66 | wdt@20300 { |
| 67 | compatible = "marvell,orion-wdt"; |
| 68 | reg = <0x20300 0x28>; |
| 69 | status = "okay"; |
| 70 | }; |
| 71 | |
| 72 | sata@80000 { |
| 73 | compatible = "marvell,orion-sata"; |
| 74 | reg = <0x80000 0x5000>; |
| 75 | interrupts = <29>; |
| 76 | status = "disabled"; |
| 77 | }; |
| 78 | |
| 79 | i2c@11000 { |
| 80 | compatible = "marvell,mv64xxx-i2c"; |
| 81 | reg = <0x11000 0x20>; |
| 82 | #address-cells = <1>; |
| 83 | #size-cells = <0>; |
| 84 | interrupts = <5>; |
| 85 | clock-frequency = <100000>; |
| 86 | status = "disabled"; |
| 87 | }; |
| 88 | |
| 89 | crypto@90000 { |
| 90 | compatible = "marvell,orion-crypto"; |
| 91 | reg = <0x90000 0x10000>, |
| 92 | <0xf2200000 0x800>; |
| 93 | reg-names = "regs", "sram"; |
| 94 | interrupts = <22>; |
| 95 | status = "okay"; |
| 96 | }; |
| 97 | }; |
| 98 | }; |