blob: dd2a5b134390682b571be17cf5b2689bd2f7bfdc [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * File: mca_asm.h
Hidetoshi Setofe77efb2008-01-07 10:11:57 +09003 * Purpose: Machine check handling specific defines
Linus Torvalds1da177e2005-04-16 15:20:36 -07004 *
5 * Copyright (C) 1999 Silicon Graphics, Inc.
Hidetoshi Setofe77efb2008-01-07 10:11:57 +09006 * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
Linus Torvalds1da177e2005-04-16 15:20:36 -07007 * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
8 * Copyright (C) 2000 Hewlett-Packard Co.
9 * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
10 * Copyright (C) 2002 Intel Corp.
11 * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
Keith Owens7f613c72005-09-11 17:22:53 +100012 * Copyright (C) 2005 Silicon Graphics, Inc
13 * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
Linus Torvalds1da177e2005-04-16 15:20:36 -070014 */
15#ifndef _ASM_IA64_MCA_ASM_H
16#define _ASM_IA64_MCA_ASM_H
17
18#define PSR_IC 13
19#define PSR_I 14
20#define PSR_DT 17
21#define PSR_RT 27
22#define PSR_MC 35
23#define PSR_IT 36
24#define PSR_BN 44
25
26/*
27 * This macro converts a instruction virtual address to a physical address
28 * Right now for simulation purposes the virtual addresses are
29 * direct mapped to physical addresses.
30 * 1. Lop off bits 61 thru 63 in the virtual address
31 */
32#define INST_VA_TO_PA(addr) \
33 dep addr = 0, addr, 61, 3
34/*
35 * This macro converts a data virtual address to a physical address
36 * Right now for simulation purposes the virtual addresses are
37 * direct mapped to physical addresses.
38 * 1. Lop off bits 61 thru 63 in the virtual address
39 */
40#define DATA_VA_TO_PA(addr) \
41 tpa addr = addr
42/*
43 * This macro converts a data physical address to a virtual address
44 * Right now for simulation purposes the virtual addresses are
45 * direct mapped to physical addresses.
46 * 1. Put 0x7 in bits 61 thru 63.
47 */
48#define DATA_PA_TO_VA(addr,temp) \
49 mov temp = 0x7 ;; \
50 dep addr = temp, addr, 61, 3
51
52#define GET_THIS_PADDR(reg, var) \
53 mov reg = IA64_KR(PER_CPU_DATA);; \
54 addl reg = THIS_CPU(var), reg
55
56/*
57 * This macro jumps to the instruction at the given virtual address
58 * and starts execution in physical mode with all the address
59 * translations turned off.
60 * 1. Save the current psr
61 * 2. Make sure that all the upper 32 bits are off
62 *
63 * 3. Clear the interrupt enable and interrupt state collection bits
64 * in the psr before updating the ipsr and iip.
65 *
66 * 4. Turn off the instruction, data and rse translation bits of the psr
67 * and store the new value into ipsr
68 * Also make sure that the interrupts are disabled.
69 * Ensure that we are in little endian mode.
70 * [psr.{rt, it, dt, i, be} = 0]
71 *
72 * 5. Get the physical address corresponding to the virtual address
73 * of the next instruction bundle and put it in iip.
74 * (Using magic numbers 24 and 40 in the deposint instruction since
75 * the IA64_SDK code directly maps to lower 24bits as physical address
76 * from a virtual address).
77 *
78 * 6. Do an rfi to move the values from ipsr to psr and iip to ip.
79 */
80#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
81 mov old_psr = psr; \
82 ;; \
83 dep old_psr = 0, old_psr, 32, 32; \
84 \
85 mov ar.rsc = 0 ; \
86 ;; \
87 srlz.d; \
88 mov temp2 = ar.bspstore; \
89 ;; \
90 DATA_VA_TO_PA(temp2); \
91 ;; \
92 mov temp1 = ar.rnat; \
93 ;; \
94 mov ar.bspstore = temp2; \
95 ;; \
96 mov ar.rnat = temp1; \
97 mov temp1 = psr; \
98 mov temp2 = psr; \
99 ;; \
100 \
101 dep temp2 = 0, temp2, PSR_IC, 2; \
102 ;; \
103 mov psr.l = temp2; \
104 ;; \
105 srlz.d; \
106 dep temp1 = 0, temp1, 32, 32; \
107 ;; \
108 dep temp1 = 0, temp1, PSR_IT, 1; \
109 ;; \
110 dep temp1 = 0, temp1, PSR_DT, 1; \
111 ;; \
112 dep temp1 = 0, temp1, PSR_RT, 1; \
113 ;; \
114 dep temp1 = 0, temp1, PSR_I, 1; \
115 ;; \
116 dep temp1 = 0, temp1, PSR_IC, 1; \
117 ;; \
118 dep temp1 = -1, temp1, PSR_MC, 1; \
119 ;; \
120 mov cr.ipsr = temp1; \
121 ;; \
122 LOAD_PHYSICAL(p0, temp2, start_addr); \
123 ;; \
124 mov cr.iip = temp2; \
125 mov cr.ifs = r0; \
126 DATA_VA_TO_PA(sp); \
127 DATA_VA_TO_PA(gp); \
128 ;; \
129 srlz.i; \
130 ;; \
131 nop 1; \
132 nop 2; \
133 nop 1; \
134 nop 2; \
135 rfi; \
136 ;;
137
138/*
139 * This macro jumps to the instruction at the given virtual address
140 * and starts execution in virtual mode with all the address
141 * translations turned on.
142 * 1. Get the old saved psr
143 *
144 * 2. Clear the interrupt state collection bit in the current psr.
145 *
146 * 3. Set the instruction translation bit back in the old psr
147 * Note we have to do this since we are right now saving only the
148 * lower 32-bits of old psr.(Also the old psr has the data and
149 * rse translation bits on)
150 *
151 * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1.
152 *
153 * 5. Reset the current thread pointer (r13).
154 *
155 * 6. Set iip to the virtual address of the next instruction bundle.
156 *
157 * 7. Do an rfi to move ipsr to psr and iip to ip.
158 */
159
160#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
161 mov temp2 = psr; \
162 ;; \
163 mov old_psr = temp2; \
164 ;; \
165 dep temp2 = 0, temp2, PSR_IC, 2; \
166 ;; \
167 mov psr.l = temp2; \
168 mov ar.rsc = 0; \
169 ;; \
170 srlz.d; \
171 mov r13 = ar.k6; \
172 mov temp2 = ar.bspstore; \
173 ;; \
174 DATA_PA_TO_VA(temp2,temp1); \
175 ;; \
176 mov temp1 = ar.rnat; \
177 ;; \
178 mov ar.bspstore = temp2; \
179 ;; \
180 mov ar.rnat = temp1; \
181 ;; \
182 mov temp1 = old_psr; \
183 ;; \
184 mov temp2 = 1; \
185 ;; \
186 dep temp1 = temp2, temp1, PSR_IC, 1; \
187 ;; \
188 dep temp1 = temp2, temp1, PSR_IT, 1; \
189 ;; \
190 dep temp1 = temp2, temp1, PSR_DT, 1; \
191 ;; \
192 dep temp1 = temp2, temp1, PSR_RT, 1; \
193 ;; \
194 dep temp1 = temp2, temp1, PSR_BN, 1; \
195 ;; \
196 \
197 mov cr.ipsr = temp1; \
198 movl temp2 = start_addr; \
199 ;; \
200 mov cr.iip = temp2; \
Zou Nan haif5a3f3d2006-09-14 08:25:15 +0800201 movl gp = __gp \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202 ;; \
203 DATA_PA_TO_VA(sp, temp1); \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700204 srlz.i; \
205 ;; \
206 nop 1; \
207 nop 2; \
208 nop 1; \
209 rfi \
210 ;;
211
212/*
Keith Owens7f613c72005-09-11 17:22:53 +1000213 * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
214 * stacks, except that the SAL/OS state and a switch_stack are stored near the
215 * top of the MCA/INIT stack. To support concurrent entry to MCA or INIT, as
216 * well as MCA over INIT, each event needs its own SAL/OS state. All entries
217 * are 16 byte aligned.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218 *
Keith Owens7f613c72005-09-11 17:22:53 +1000219 * +---------------------------+
220 * | pt_regs |
221 * +---------------------------+
222 * | switch_stack |
223 * +---------------------------+
224 * | SAL/OS state |
225 * +---------------------------+
226 * | 16 byte scratch area |
227 * +---------------------------+ <-------- SP at start of C MCA handler
228 * | ..... |
229 * +---------------------------+
230 * | RBS for MCA/INIT handler |
231 * +---------------------------+
232 * | struct task for MCA/INIT |
233 * +---------------------------+ <-------- Bottom of MCA/INIT stack
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235
Keith Owens7f613c72005-09-11 17:22:53 +1000236#define ALIGN16(x) ((x)&~15)
237#define MCA_PT_REGS_OFFSET ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
238#define MCA_SWITCH_STACK_OFFSET ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
239#define MCA_SOS_OFFSET ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
240#define MCA_SP_OFFSET ALIGN16(MCA_SOS_OFFSET-16)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241
242#endif /* _ASM_IA64_MCA_ASM_H */