Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */ |
| 2 | /* |
| 3 | Written 1996-1999 by Donald Becker. |
| 4 | |
| 5 | This software may be used and distributed according to the terms |
| 6 | of the GNU General Public License, incorporated herein by reference. |
| 7 | |
| 8 | This driver is for the 3Com "Vortex" and "Boomerang" series ethercards. |
| 9 | Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597 |
| 10 | and the EtherLink XL 3c900 and 3c905 cards. |
| 11 | |
| 12 | Problem reports and questions should be directed to |
| 13 | vortex@scyld.com |
| 14 | |
| 15 | The author may be reached as becker@scyld.com, or C/O |
| 16 | Scyld Computing Corporation |
| 17 | 410 Severn Ave., Suite 210 |
| 18 | Annapolis MD 21403 |
| 19 | |
| 20 | Linux Kernel Additions: |
| 21 | |
| 22 | 0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates |
| 23 | 0.99H+lk1.0 - Jeff Garzik <jgarzik@pobox.com> |
| 24 | Remove compatibility defines for kernel versions < 2.2.x. |
| 25 | Update for new 2.3.x module interface |
| 26 | LK1.1.2 (March 19, 2000) |
| 27 | * New PCI interface (jgarzik) |
| 28 | |
| 29 | LK1.1.3 25 April 2000, Andrew Morton <andrewm@uow.edu.au> |
| 30 | - Merged with 3c575_cb.c |
| 31 | - Don't set RxComplete in boomerang interrupt enable reg |
| 32 | - spinlock in vortex_timer to protect mdio functions |
| 33 | - disable local interrupts around call to vortex_interrupt in |
| 34 | vortex_tx_timeout() (So vortex_interrupt can use spin_lock()) |
| 35 | - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl |
| 36 | - In vortex_start_xmit(), move the lock to _after_ we've altered |
| 37 | vp->cur_tx and vp->tx_full. This defeats the race between |
| 38 | vortex_start_xmit() and vortex_interrupt which was identified |
| 39 | by Bogdan Costescu. |
| 40 | - Merged back support for six new cards from various sources |
| 41 | - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus |
| 42 | insertion oops) |
| 43 | - Tell it that 3c905C has NWAY for 100bT autoneg |
| 44 | - Fix handling of SetStatusEnd in 'Too much work..' code, as |
| 45 | per 2.3.99's 3c575_cb (Dave Hinds). |
| 46 | - Split ISR into two for vortex & boomerang |
| 47 | - Fix MOD_INC/DEC races |
| 48 | - Handle resource allocation failures. |
| 49 | - Fix 3CCFE575CT LED polarity |
| 50 | - Make tx_interrupt_mitigation the default |
| 51 | |
| 52 | LK1.1.4 25 April 2000, Andrew Morton <andrewm@uow.edu.au> |
| 53 | - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs. |
| 54 | - Put vortex_info_tbl into __devinitdata |
| 55 | - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well |
| 56 | as in the hardware. |
| 57 | - Increased the loop counter in issue_and_wait from 2,000 to 4,000. |
| 58 | |
| 59 | LK1.1.5 28 April 2000, andrewm |
| 60 | - Added powerpc defines (John Daniel <jdaniel@etresoft.com> said these work...) |
| 61 | - Some extra diagnostics |
| 62 | - In vortex_error(), reset the Tx on maxCollisions. Otherwise most |
| 63 | chips usually get a Tx timeout. |
| 64 | - Added extra_reset module parm |
| 65 | - Replaced some inline timer manip with mod_timer |
| 66 | (Franois romieu <Francois.Romieu@nic.fr>) |
| 67 | - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway |
| 68 | (this came across from 3c575_cb). |
| 69 | |
| 70 | LK1.1.6 06 Jun 2000, andrewm |
| 71 | - Backed out the PPC defines. |
| 72 | - Use del_timer_sync(), mod_timer(). |
| 73 | - Fix wrapped ulong comparison in boomerang_rx() |
| 74 | - Add IS_TORNADO, use it to suppress 3c905C checksum error msg |
| 75 | (Donald Becker, I Lee Hetherington <ilh@sls.lcs.mit.edu>) |
| 76 | - Replace union wn3_config with BFINS/BFEXT manipulation for |
| 77 | sparc64 (Pete Zaitcev, Peter Jones) |
| 78 | - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex): |
| 79 | do a netif_wake_queue() to better recover from errors. (Anders Pedersen, |
| 80 | Donald Becker) |
| 81 | - Print a warning on out-of-memory (rate limited to 1 per 10 secs) |
| 82 | - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland) |
| 83 | |
| 84 | LK1.1.7 2 Jul 2000 andrewm |
| 85 | - Better handling of shared IRQs |
| 86 | - Reset the transmitter on a Tx reclaim error |
| 87 | - Fixed crash under OOM during vortex_open() (Mark Hemment) |
| 88 | - Fix Rx cessation problem during OOM (help from Mark Hemment) |
| 89 | - The spinlocks around the mdio access were blocking interrupts for 300uS. |
| 90 | Fix all this to use spin_lock_bh() within mdio_read/write |
| 91 | - Only write to TxFreeThreshold if it's a boomerang - other NICs don't |
| 92 | have one. |
| 93 | - Added 802.3x MAC-layer flow control support |
| 94 | |
| 95 | LK1.1.8 13 Aug 2000 andrewm |
| 96 | - Ignore request_region() return value - already reserved if Cardbus. |
| 97 | - Merged some additional Cardbus flags from Don's 0.99Qk |
| 98 | - Some fixes for 3c556 (Fred Maciel) |
| 99 | - Fix for EISA initialisation (Jan Rekorajski) |
| 100 | - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers |
| 101 | - Fixed MII_XCVR_PWR for 3CCFE575CT |
| 102 | - Added INVERT_LED_PWR, used it. |
| 103 | - Backed out the extra_reset stuff |
| 104 | |
| 105 | LK1.1.9 12 Sep 2000 andrewm |
| 106 | - Backed out the tx_reset_resume flags. It was a no-op. |
| 107 | - In vortex_error, don't reset the Tx on txReclaim errors |
| 108 | - In vortex_error, don't reset the Tx on maxCollisions errors. |
| 109 | Hence backed out all the DownListPtr logic here. |
| 110 | - In vortex_error, give Tornado cards a partial TxReset on |
| 111 | maxCollisions (David Hinds). Defined MAX_COLLISION_RESET for this. |
| 112 | - Redid some driver flags and device names based on pcmcia_cs-3.1.20. |
| 113 | - Fixed a bug where, if vp->tx_full is set when the interface |
| 114 | is downed, it remains set when the interface is upped. Bad |
| 115 | things happen. |
| 116 | |
| 117 | LK1.1.10 17 Sep 2000 andrewm |
| 118 | - Added EEPROM_8BIT for 3c555 (Fred Maciel) |
| 119 | - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg) |
| 120 | - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO" |
| 121 | |
| 122 | LK1.1.11 13 Nov 2000 andrewm |
| 123 | - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER |
| 124 | |
| 125 | LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1) |
| 126 | - Call pci_enable_device before we request our IRQ (Tobias Ringstrom) |
| 127 | - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra) |
| 128 | - Added extended issue_and_wait for the 3c905CX. |
| 129 | - Look for an MII on PHY index 24 first (3c905CX oddity). |
| 130 | - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger) |
| 131 | - Don't free skbs we don't own on oom path in vortex_open(). |
| 132 | |
| 133 | LK1.1.13 27 Jan 2001 |
| 134 | - Added explicit `medialock' flag so we can truly |
| 135 | lock the media type down with `options'. |
| 136 | - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo <acme@conectiva.com.br>) |
| 137 | - Added and used EEPROM_NORESET for 3c556B PM resumes. |
| 138 | - Fixed leakage of vp->rx_ring. |
| 139 | - Break out separate HAS_HWCKSM device capability flag. |
| 140 | - Kill vp->tx_full (ANK) |
| 141 | - Merge zerocopy fragment handling (ANK?) |
| 142 | |
| 143 | LK1.1.14 15 Feb 2001 |
| 144 | - Enable WOL. Can be turned on with `enable_wol' module option. |
| 145 | - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul) |
| 146 | - If a device's internalconfig register reports it has NWAY, |
| 147 | use it, even if autoselect is enabled. |
| 148 | |
| 149 | LK1.1.15 6 June 2001 akpm |
| 150 | - Prevent double counting of received bytes (Lars Christensen) |
| 151 | - Add ethtool support (jgarzik) |
| 152 | - Add module parm descriptions (Andrzej M. Krzysztofowicz) |
| 153 | - Implemented alloc_etherdev() API |
| 154 | - Special-case the 'Tx error 82' message. |
| 155 | |
| 156 | LK1.1.16 18 July 2001 akpm |
| 157 | - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM |
| 158 | - Lessen verbosity of bootup messages |
| 159 | - Fix WOL - use new PM API functions. |
| 160 | - Use netif_running() instead of vp->open in suspend/resume. |
| 161 | - Don't reset the interface logic on open/close/rmmod. It upsets |
| 162 | autonegotiation, and hence DHCP (from 0.99T). |
| 163 | - Back out EEPROM_NORESET flag because of the above (we do it for all |
| 164 | NICs). |
| 165 | - Correct 3c982 identification string |
| 166 | - Rename wait_for_completion() to issue_and_wait() to avoid completion.h |
| 167 | clash. |
| 168 | |
| 169 | LK1.1.17 18Dec01 akpm |
| 170 | - PCI ID 9805 is a Python-T, not a dual-port Cyclone. Apparently. |
| 171 | And it has NWAY. |
| 172 | - Mask our advertised modes (vp->advertising) with our capabilities |
| 173 | (MII reg5) when deciding which duplex mode to use. |
| 174 | - Add `global_options' as default for options[]. Ditto global_enable_wol, |
| 175 | global_full_duplex. |
| 176 | |
| 177 | LK1.1.18 01Jul02 akpm |
| 178 | - Fix for undocumented transceiver power-up bit on some 3c566B's |
| 179 | (Donald Becker, Rahul Karnik) |
| 180 | |
| 181 | - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details. |
| 182 | - Also see Documentation/networking/vortex.txt |
| 183 | |
| 184 | LK1.1.19 10Nov02 Marc Zyngier <maz@wild-wind.fr.eu.org> |
| 185 | - EISA sysfs integration. |
| 186 | */ |
| 187 | |
| 188 | /* |
| 189 | * FIXME: This driver _could_ support MTU changing, but doesn't. See Don's hamachi.c implementation |
| 190 | * as well as other drivers |
| 191 | * |
| 192 | * NOTE: If you make 'vortex_debug' a constant (#define vortex_debug 0) the driver shrinks by 2k |
| 193 | * due to dead code elimination. There will be some performance benefits from this due to |
| 194 | * elimination of all the tests and reduced cache footprint. |
| 195 | */ |
| 196 | |
| 197 | |
| 198 | #define DRV_NAME "3c59x" |
| 199 | #define DRV_VERSION "LK1.1.19" |
| 200 | #define DRV_RELDATE "10 Nov 2002" |
| 201 | |
| 202 | |
| 203 | |
| 204 | /* A few values that may be tweaked. */ |
| 205 | /* Keep the ring sizes a power of two for efficiency. */ |
| 206 | #define TX_RING_SIZE 16 |
| 207 | #define RX_RING_SIZE 32 |
| 208 | #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ |
| 209 | |
| 210 | /* "Knobs" that adjust features and parameters. */ |
| 211 | /* Set the copy breakpoint for the copy-only-tiny-frames scheme. |
| 212 | Setting to > 1512 effectively disables this feature. */ |
| 213 | #ifndef __arm__ |
| 214 | static int rx_copybreak = 200; |
| 215 | #else |
| 216 | /* ARM systems perform better by disregarding the bus-master |
| 217 | transfer capability of these cards. -- rmk */ |
| 218 | static int rx_copybreak = 1513; |
| 219 | #endif |
| 220 | /* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */ |
| 221 | static const int mtu = 1500; |
| 222 | /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ |
| 223 | static int max_interrupt_work = 32; |
| 224 | /* Tx timeout interval (millisecs) */ |
| 225 | static int watchdog = 5000; |
| 226 | |
| 227 | /* Allow aggregation of Tx interrupts. Saves CPU load at the cost |
| 228 | * of possible Tx stalls if the system is blocking interrupts |
| 229 | * somewhere else. Undefine this to disable. |
| 230 | */ |
| 231 | #define tx_interrupt_mitigation 1 |
| 232 | |
| 233 | /* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */ |
| 234 | #define vortex_debug debug |
| 235 | #ifdef VORTEX_DEBUG |
| 236 | static int vortex_debug = VORTEX_DEBUG; |
| 237 | #else |
| 238 | static int vortex_debug = 1; |
| 239 | #endif |
| 240 | |
| 241 | #include <linux/config.h> |
| 242 | #include <linux/module.h> |
| 243 | #include <linux/kernel.h> |
| 244 | #include <linux/string.h> |
| 245 | #include <linux/timer.h> |
| 246 | #include <linux/errno.h> |
| 247 | #include <linux/in.h> |
| 248 | #include <linux/ioport.h> |
| 249 | #include <linux/slab.h> |
| 250 | #include <linux/interrupt.h> |
| 251 | #include <linux/pci.h> |
| 252 | #include <linux/mii.h> |
| 253 | #include <linux/init.h> |
| 254 | #include <linux/netdevice.h> |
| 255 | #include <linux/etherdevice.h> |
| 256 | #include <linux/skbuff.h> |
| 257 | #include <linux/ethtool.h> |
| 258 | #include <linux/highmem.h> |
| 259 | #include <linux/eisa.h> |
| 260 | #include <linux/bitops.h> |
Marcelo Feitoza Parisi | ff5688a | 2006-01-09 18:37:15 -0800 | [diff] [blame] | 261 | #include <linux/jiffies.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 262 | #include <asm/irq.h> /* For NR_IRQS only. */ |
| 263 | #include <asm/io.h> |
| 264 | #include <asm/uaccess.h> |
| 265 | |
| 266 | /* Kernel compatibility defines, some common to David Hinds' PCMCIA package. |
| 267 | This is only in the support-all-kernels source code. */ |
| 268 | |
| 269 | #define RUN_AT(x) (jiffies + (x)) |
| 270 | |
| 271 | #include <linux/delay.h> |
| 272 | |
| 273 | |
| 274 | static char version[] __devinitdata = |
| 275 | DRV_NAME ": Donald Becker and others. www.scyld.com/network/vortex.html\n"; |
| 276 | |
| 277 | MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); |
| 278 | MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver " |
| 279 | DRV_VERSION " " DRV_RELDATE); |
| 280 | MODULE_LICENSE("GPL"); |
| 281 | MODULE_VERSION(DRV_VERSION); |
| 282 | |
| 283 | |
| 284 | /* Operational parameter that usually are not changed. */ |
| 285 | |
| 286 | /* The Vortex size is twice that of the original EtherLinkIII series: the |
| 287 | runtime register window, window 1, is now always mapped in. |
| 288 | The Boomerang size is twice as large as the Vortex -- it has additional |
| 289 | bus master control registers. */ |
| 290 | #define VORTEX_TOTAL_SIZE 0x20 |
| 291 | #define BOOMERANG_TOTAL_SIZE 0x40 |
| 292 | |
| 293 | /* Set iff a MII transceiver on any interface requires mdio preamble. |
| 294 | This only set with the original DP83840 on older 3c905 boards, so the extra |
| 295 | code size of a per-interface flag is not worthwhile. */ |
| 296 | static char mii_preamble_required; |
| 297 | |
| 298 | #define PFX DRV_NAME ": " |
| 299 | |
| 300 | |
| 301 | |
| 302 | /* |
| 303 | Theory of Operation |
| 304 | |
| 305 | I. Board Compatibility |
| 306 | |
| 307 | This device driver is designed for the 3Com FastEtherLink and FastEtherLink |
| 308 | XL, 3Com's PCI to 10/100baseT adapters. It also works with the 10Mbs |
| 309 | versions of the FastEtherLink cards. The supported product IDs are |
| 310 | 3c590, 3c592, 3c595, 3c597, 3c900, 3c905 |
| 311 | |
| 312 | The related ISA 3c515 is supported with a separate driver, 3c515.c, included |
| 313 | with the kernel source or available from |
| 314 | cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html |
| 315 | |
| 316 | II. Board-specific settings |
| 317 | |
| 318 | PCI bus devices are configured by the system at boot time, so no jumpers |
| 319 | need to be set on the board. The system BIOS should be set to assign the |
| 320 | PCI INTA signal to an otherwise unused system IRQ line. |
| 321 | |
| 322 | The EEPROM settings for media type and forced-full-duplex are observed. |
| 323 | The EEPROM media type should be left at the default "autoselect" unless using |
| 324 | 10base2 or AUI connections which cannot be reliably detected. |
| 325 | |
| 326 | III. Driver operation |
| 327 | |
| 328 | The 3c59x series use an interface that's very similar to the previous 3c5x9 |
| 329 | series. The primary interface is two programmed-I/O FIFOs, with an |
| 330 | alternate single-contiguous-region bus-master transfer (see next). |
| 331 | |
| 332 | The 3c900 "Boomerang" series uses a full-bus-master interface with separate |
| 333 | lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet, |
| 334 | DEC Tulip and Intel Speedo3. The first chip version retains a compatible |
| 335 | programmed-I/O interface that has been removed in 'B' and subsequent board |
| 336 | revisions. |
| 337 | |
| 338 | One extension that is advertised in a very large font is that the adapters |
| 339 | are capable of being bus masters. On the Vortex chip this capability was |
| 340 | only for a single contiguous region making it far less useful than the full |
| 341 | bus master capability. There is a significant performance impact of taking |
| 342 | an extra interrupt or polling for the completion of each transfer, as well |
| 343 | as difficulty sharing the single transfer engine between the transmit and |
| 344 | receive threads. Using DMA transfers is a win only with large blocks or |
| 345 | with the flawed versions of the Intel Orion motherboard PCI controller. |
| 346 | |
| 347 | The Boomerang chip's full-bus-master interface is useful, and has the |
| 348 | currently-unused advantages over other similar chips that queued transmit |
| 349 | packets may be reordered and receive buffer groups are associated with a |
| 350 | single frame. |
| 351 | |
| 352 | With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme. |
| 353 | Rather than a fixed intermediate receive buffer, this scheme allocates |
| 354 | full-sized skbuffs as receive buffers. The value RX_COPYBREAK is used as |
| 355 | the copying breakpoint: it is chosen to trade-off the memory wasted by |
| 356 | passing the full-sized skbuff to the queue layer for all frames vs. the |
| 357 | copying cost of copying a frame to a correctly-sized skbuff. |
| 358 | |
| 359 | IIIC. Synchronization |
| 360 | The driver runs as two independent, single-threaded flows of control. One |
| 361 | is the send-packet routine, which enforces single-threaded use by the |
| 362 | dev->tbusy flag. The other thread is the interrupt handler, which is single |
| 363 | threaded by the hardware and other software. |
| 364 | |
| 365 | IV. Notes |
| 366 | |
| 367 | Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development |
| 368 | 3c590, 3c595, and 3c900 boards. |
| 369 | The name "Vortex" is the internal 3Com project name for the PCI ASIC, and |
| 370 | the EISA version is called "Demon". According to Terry these names come |
| 371 | from rides at the local amusement park. |
| 372 | |
| 373 | The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes! |
| 374 | This driver only supports ethernet packets because of the skbuff allocation |
| 375 | limit of 4K. |
| 376 | */ |
| 377 | |
| 378 | /* This table drives the PCI probe routines. It's mostly boilerplate in all |
| 379 | of the drivers, and will likely be provided by some future kernel. |
| 380 | */ |
| 381 | enum pci_flags_bit { |
| 382 | PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, |
| 383 | PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3, |
| 384 | }; |
| 385 | |
| 386 | enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8, |
| 387 | EEPROM_8BIT=0x10, /* AKPM: Uses 0x230 as the base bitmaps for EEPROM reads */ |
| 388 | HAS_PWR_CTRL=0x20, HAS_MII=0x40, HAS_NWAY=0x80, HAS_CB_FNS=0x100, |
| 389 | INVERT_MII_PWR=0x200, INVERT_LED_PWR=0x400, MAX_COLLISION_RESET=0x800, |
| 390 | EEPROM_OFFSET=0x1000, HAS_HWCKSM=0x2000, WNO_XCVR_PWR=0x4000, |
| 391 | EXTRA_PREAMBLE=0x8000, EEPROM_RESET=0x10000, }; |
| 392 | |
| 393 | enum vortex_chips { |
| 394 | CH_3C590 = 0, |
| 395 | CH_3C592, |
| 396 | CH_3C597, |
| 397 | CH_3C595_1, |
| 398 | CH_3C595_2, |
| 399 | |
| 400 | CH_3C595_3, |
| 401 | CH_3C900_1, |
| 402 | CH_3C900_2, |
| 403 | CH_3C900_3, |
| 404 | CH_3C900_4, |
| 405 | |
| 406 | CH_3C900_5, |
| 407 | CH_3C900B_FL, |
| 408 | CH_3C905_1, |
| 409 | CH_3C905_2, |
| 410 | CH_3C905B_1, |
| 411 | |
| 412 | CH_3C905B_2, |
| 413 | CH_3C905B_FX, |
| 414 | CH_3C905C, |
| 415 | CH_3C9202, |
| 416 | CH_3C980, |
| 417 | CH_3C9805, |
| 418 | |
| 419 | CH_3CSOHO100_TX, |
| 420 | CH_3C555, |
| 421 | CH_3C556, |
| 422 | CH_3C556B, |
| 423 | CH_3C575, |
| 424 | |
| 425 | CH_3C575_1, |
| 426 | CH_3CCFE575, |
| 427 | CH_3CCFE575CT, |
| 428 | CH_3CCFE656, |
| 429 | CH_3CCFEM656, |
| 430 | |
| 431 | CH_3CCFEM656_1, |
| 432 | CH_3C450, |
| 433 | CH_3C920, |
| 434 | CH_3C982A, |
| 435 | CH_3C982B, |
| 436 | |
| 437 | CH_905BT4, |
| 438 | CH_920B_EMB_WNM, |
| 439 | }; |
| 440 | |
| 441 | |
| 442 | /* note: this array directly indexed by above enums, and MUST |
| 443 | * be kept in sync with both the enums above, and the PCI device |
| 444 | * table below |
| 445 | */ |
| 446 | static struct vortex_chip_info { |
| 447 | const char *name; |
| 448 | int flags; |
| 449 | int drv_flags; |
| 450 | int io_size; |
| 451 | } vortex_info_tbl[] __devinitdata = { |
| 452 | {"3c590 Vortex 10Mbps", |
| 453 | PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, |
| 454 | {"3c592 EISA 10Mbps Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ |
| 455 | PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, |
| 456 | {"3c597 EISA Fast Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ |
| 457 | PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, |
| 458 | {"3c595 Vortex 100baseTx", |
| 459 | PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, |
| 460 | {"3c595 Vortex 100baseT4", |
| 461 | PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, |
| 462 | |
| 463 | {"3c595 Vortex 100base-MII", |
| 464 | PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, }, |
| 465 | {"3c900 Boomerang 10baseT", |
| 466 | PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, |
| 467 | {"3c900 Boomerang 10Mbps Combo", |
| 468 | PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, |
| 469 | {"3c900 Cyclone 10Mbps TPO", /* AKPM: from Don's 0.99M */ |
| 470 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
| 471 | {"3c900 Cyclone 10Mbps Combo", |
| 472 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
| 473 | |
| 474 | {"3c900 Cyclone 10Mbps TPC", /* AKPM: from Don's 0.99M */ |
| 475 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
| 476 | {"3c900B-FL Cyclone 10base-FL", |
| 477 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
| 478 | {"3c905 Boomerang 100baseTx", |
| 479 | PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, |
| 480 | {"3c905 Boomerang 100baseT4", |
| 481 | PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, |
| 482 | {"3c905B Cyclone 100baseTx", |
| 483 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
| 484 | |
| 485 | {"3c905B Cyclone 10/100/BNC", |
| 486 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, |
| 487 | {"3c905B-FX Cyclone 100baseFx", |
| 488 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
| 489 | {"3c905C Tornado", |
| 490 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
| 491 | {"3c920B-EMB-WNM (ATI Radeon 9100 IGP)", |
| 492 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, }, |
| 493 | {"3c980 Cyclone", |
| 494 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
| 495 | |
| 496 | {"3c980C Python-T", |
| 497 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, |
| 498 | {"3cSOHO100-TX Hurricane", |
| 499 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, |
| 500 | {"3c555 Laptop Hurricane", |
| 501 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, }, |
| 502 | {"3c556 Laptop Tornado", |
| 503 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR| |
| 504 | HAS_HWCKSM, 128, }, |
| 505 | {"3c556B Laptop Hurricane", |
| 506 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR| |
| 507 | WNO_XCVR_PWR|HAS_HWCKSM, 128, }, |
| 508 | |
| 509 | {"3c575 [Megahertz] 10/100 LAN CardBus", |
| 510 | PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, |
| 511 | {"3c575 Boomerang CardBus", |
| 512 | PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, |
| 513 | {"3CCFE575BT Cyclone CardBus", |
| 514 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT| |
| 515 | INVERT_LED_PWR|HAS_HWCKSM, 128, }, |
| 516 | {"3CCFE575CT Tornado CardBus", |
| 517 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
| 518 | MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, |
| 519 | {"3CCFE656 Cyclone CardBus", |
| 520 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
| 521 | INVERT_LED_PWR|HAS_HWCKSM, 128, }, |
| 522 | |
| 523 | {"3CCFEM656B Cyclone+Winmodem CardBus", |
| 524 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
| 525 | INVERT_LED_PWR|HAS_HWCKSM, 128, }, |
| 526 | {"3CXFEM656C Tornado+Winmodem CardBus", /* From pcmcia-cs-3.1.5 */ |
| 527 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
| 528 | MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, |
| 529 | {"3c450 HomePNA Tornado", /* AKPM: from Don's 0.99Q */ |
| 530 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, |
| 531 | {"3c920 Tornado", |
| 532 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, |
| 533 | {"3c982 Hydra Dual Port A", |
| 534 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, |
| 535 | |
| 536 | {"3c982 Hydra Dual Port B", |
| 537 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, |
| 538 | {"3c905B-T4", |
| 539 | PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
| 540 | {"3c920B-EMB-WNM Tornado", |
| 541 | PCI_USES_IO|PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, |
| 542 | |
| 543 | {NULL,}, /* NULL terminated list. */ |
| 544 | }; |
| 545 | |
| 546 | |
| 547 | static struct pci_device_id vortex_pci_tbl[] = { |
| 548 | { 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 }, |
| 549 | { 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 }, |
| 550 | { 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 }, |
| 551 | { 0x10B7, 0x5950, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_1 }, |
| 552 | { 0x10B7, 0x5951, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_2 }, |
| 553 | |
| 554 | { 0x10B7, 0x5952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_3 }, |
| 555 | { 0x10B7, 0x9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_1 }, |
| 556 | { 0x10B7, 0x9001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_2 }, |
| 557 | { 0x10B7, 0x9004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_3 }, |
| 558 | { 0x10B7, 0x9005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_4 }, |
| 559 | |
| 560 | { 0x10B7, 0x9006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_5 }, |
| 561 | { 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL }, |
| 562 | { 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 }, |
| 563 | { 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 }, |
| 564 | { 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 }, |
| 565 | |
| 566 | { 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 }, |
| 567 | { 0x10B7, 0x905A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_FX }, |
| 568 | { 0x10B7, 0x9200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905C }, |
| 569 | { 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9202 }, |
| 570 | { 0x10B7, 0x9800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C980 }, |
| 571 | { 0x10B7, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9805 }, |
| 572 | |
| 573 | { 0x10B7, 0x7646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CSOHO100_TX }, |
| 574 | { 0x10B7, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C555 }, |
| 575 | { 0x10B7, 0x6055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556 }, |
| 576 | { 0x10B7, 0x6056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556B }, |
| 577 | { 0x10B7, 0x5b57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575 }, |
| 578 | |
| 579 | { 0x10B7, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575_1 }, |
| 580 | { 0x10B7, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575 }, |
| 581 | { 0x10B7, 0x5257, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575CT }, |
| 582 | { 0x10B7, 0x6560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE656 }, |
| 583 | { 0x10B7, 0x6562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656 }, |
| 584 | |
| 585 | { 0x10B7, 0x6564, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656_1 }, |
| 586 | { 0x10B7, 0x4500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C450 }, |
| 587 | { 0x10B7, 0x9201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C920 }, |
| 588 | { 0x10B7, 0x1201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982A }, |
| 589 | { 0x10B7, 0x1202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982B }, |
| 590 | |
| 591 | { 0x10B7, 0x9056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_905BT4 }, |
| 592 | { 0x10B7, 0x9210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM }, |
| 593 | |
| 594 | {0,} /* 0 terminated list. */ |
| 595 | }; |
| 596 | MODULE_DEVICE_TABLE(pci, vortex_pci_tbl); |
| 597 | |
| 598 | |
| 599 | /* Operational definitions. |
| 600 | These are not used by other compilation units and thus are not |
| 601 | exported in a ".h" file. |
| 602 | |
| 603 | First the windows. There are eight register windows, with the command |
| 604 | and status registers available in each. |
| 605 | */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 606 | #define EL3WINDOW(win_num) iowrite16(SelectWindow + (win_num), ioaddr + EL3_CMD) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 607 | #define EL3_CMD 0x0e |
| 608 | #define EL3_STATUS 0x0e |
| 609 | |
| 610 | /* The top five bits written to EL3_CMD are a command, the lower |
| 611 | 11 bits are the parameter, if applicable. |
| 612 | Note that 11 parameters bits was fine for ethernet, but the new chip |
| 613 | can handle FDDI length frames (~4500 octets) and now parameters count |
| 614 | 32-bit 'Dwords' rather than octets. */ |
| 615 | |
| 616 | enum vortex_cmd { |
| 617 | TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, |
| 618 | RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, |
| 619 | UpStall = 6<<11, UpUnstall = (6<<11)+1, |
| 620 | DownStall = (6<<11)+2, DownUnstall = (6<<11)+3, |
| 621 | RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, |
| 622 | FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, |
| 623 | SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, |
| 624 | SetTxThreshold = 18<<11, SetTxStart = 19<<11, |
| 625 | StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11, |
| 626 | StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,}; |
| 627 | |
| 628 | /* The SetRxFilter command accepts the following classes: */ |
| 629 | enum RxFilter { |
| 630 | RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; |
| 631 | |
| 632 | /* Bits in the general status register. */ |
| 633 | enum vortex_status { |
| 634 | IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004, |
| 635 | TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, |
| 636 | IntReq = 0x0040, StatsFull = 0x0080, |
| 637 | DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10, |
| 638 | DMAInProgress = 1<<11, /* DMA controller is still busy.*/ |
| 639 | CmdInProgress = 1<<12, /* EL3_CMD is still busy.*/ |
| 640 | }; |
| 641 | |
| 642 | /* Register window 1 offsets, the window used in normal operation. |
| 643 | On the Vortex this window is always mapped at offsets 0x10-0x1f. */ |
| 644 | enum Window1 { |
| 645 | TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, |
| 646 | RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B, |
| 647 | TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ |
| 648 | }; |
| 649 | enum Window0 { |
| 650 | Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ |
| 651 | Wn0EepromData = 12, /* Window 0: EEPROM results register. */ |
| 652 | IntrStatus=0x0E, /* Valid in all windows. */ |
| 653 | }; |
| 654 | enum Win0_EEPROM_bits { |
| 655 | EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, |
| 656 | EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ |
| 657 | EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ |
| 658 | }; |
| 659 | /* EEPROM locations. */ |
| 660 | enum eeprom_offset { |
| 661 | PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3, |
| 662 | EtherLink3ID=7, IFXcvrIO=8, IRQLine=9, |
| 663 | NodeAddr01=10, NodeAddr23=11, NodeAddr45=12, |
| 664 | DriverTune=13, Checksum=15}; |
| 665 | |
| 666 | enum Window2 { /* Window 2. */ |
| 667 | Wn2_ResetOptions=12, |
| 668 | }; |
| 669 | enum Window3 { /* Window 3: MAC/config bits. */ |
| 670 | Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8, |
| 671 | }; |
| 672 | |
| 673 | #define BFEXT(value, offset, bitcount) \ |
| 674 | ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) |
| 675 | |
| 676 | #define BFINS(lhs, rhs, offset, bitcount) \ |
| 677 | (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ |
| 678 | (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) |
| 679 | |
| 680 | #define RAM_SIZE(v) BFEXT(v, 0, 3) |
| 681 | #define RAM_WIDTH(v) BFEXT(v, 3, 1) |
| 682 | #define RAM_SPEED(v) BFEXT(v, 4, 2) |
| 683 | #define ROM_SIZE(v) BFEXT(v, 6, 2) |
| 684 | #define RAM_SPLIT(v) BFEXT(v, 16, 2) |
| 685 | #define XCVR(v) BFEXT(v, 20, 4) |
| 686 | #define AUTOSELECT(v) BFEXT(v, 24, 1) |
| 687 | |
| 688 | enum Window4 { /* Window 4: Xcvr/media bits. */ |
| 689 | Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10, |
| 690 | }; |
| 691 | enum Win4_Media_bits { |
| 692 | Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ |
| 693 | Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ |
| 694 | Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ |
| 695 | Media_LnkBeat = 0x0800, |
| 696 | }; |
| 697 | enum Window7 { /* Window 7: Bus Master control. */ |
| 698 | Wn7_MasterAddr = 0, Wn7_VlanEtherType=4, Wn7_MasterLen = 6, |
| 699 | Wn7_MasterStatus = 12, |
| 700 | }; |
| 701 | /* Boomerang bus master control registers. */ |
| 702 | enum MasterCtrl { |
| 703 | PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c, |
| 704 | TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38, |
| 705 | }; |
| 706 | |
| 707 | /* The Rx and Tx descriptor lists. |
| 708 | Caution Alpha hackers: these types are 32 bits! Note also the 8 byte |
| 709 | alignment contraint on tx_ring[] and rx_ring[]. */ |
| 710 | #define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */ |
| 711 | #define DN_COMPLETE 0x00010000 /* This packet has been downloaded */ |
| 712 | struct boom_rx_desc { |
| 713 | u32 next; /* Last entry points to 0. */ |
| 714 | s32 status; |
| 715 | u32 addr; /* Up to 63 addr/len pairs possible. */ |
| 716 | s32 length; /* Set LAST_FRAG to indicate last pair. */ |
| 717 | }; |
| 718 | /* Values for the Rx status entry. */ |
| 719 | enum rx_desc_status { |
| 720 | RxDComplete=0x00008000, RxDError=0x4000, |
| 721 | /* See boomerang_rx() for actual error bits */ |
| 722 | IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27, |
| 723 | IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31, |
| 724 | }; |
| 725 | |
| 726 | #ifdef MAX_SKB_FRAGS |
| 727 | #define DO_ZEROCOPY 1 |
| 728 | #else |
| 729 | #define DO_ZEROCOPY 0 |
| 730 | #endif |
| 731 | |
| 732 | struct boom_tx_desc { |
| 733 | u32 next; /* Last entry points to 0. */ |
| 734 | s32 status; /* bits 0:12 length, others see below. */ |
| 735 | #if DO_ZEROCOPY |
| 736 | struct { |
| 737 | u32 addr; |
| 738 | s32 length; |
| 739 | } frag[1+MAX_SKB_FRAGS]; |
| 740 | #else |
| 741 | u32 addr; |
| 742 | s32 length; |
| 743 | #endif |
| 744 | }; |
| 745 | |
| 746 | /* Values for the Tx status entry. */ |
| 747 | enum tx_desc_status { |
| 748 | CRCDisable=0x2000, TxDComplete=0x8000, |
| 749 | AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000, |
| 750 | TxIntrUploaded=0x80000000, /* IRQ when in FIFO, but maybe not sent. */ |
| 751 | }; |
| 752 | |
| 753 | /* Chip features we care about in vp->capabilities, read from the EEPROM. */ |
| 754 | enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 }; |
| 755 | |
| 756 | struct vortex_extra_stats { |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 757 | unsigned long tx_deferred; |
| 758 | unsigned long tx_max_collisions; |
| 759 | unsigned long tx_multiple_collisions; |
| 760 | unsigned long tx_single_collisions; |
| 761 | unsigned long rx_bad_ssd; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 762 | }; |
| 763 | |
| 764 | struct vortex_private { |
| 765 | /* The Rx and Tx rings should be quad-word-aligned. */ |
| 766 | struct boom_rx_desc* rx_ring; |
| 767 | struct boom_tx_desc* tx_ring; |
| 768 | dma_addr_t rx_ring_dma; |
| 769 | dma_addr_t tx_ring_dma; |
| 770 | /* The addresses of transmit- and receive-in-place skbuffs. */ |
| 771 | struct sk_buff* rx_skbuff[RX_RING_SIZE]; |
| 772 | struct sk_buff* tx_skbuff[TX_RING_SIZE]; |
| 773 | unsigned int cur_rx, cur_tx; /* The next free ring entry */ |
| 774 | unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ |
| 775 | struct net_device_stats stats; /* Generic stats */ |
| 776 | struct vortex_extra_stats xstats; /* NIC-specific extra stats */ |
| 777 | struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ |
| 778 | dma_addr_t tx_skb_dma; /* Allocated DMA address for bus master ctrl DMA. */ |
| 779 | |
| 780 | /* PCI configuration space information. */ |
| 781 | struct device *gendev; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 782 | void __iomem *ioaddr; /* IO address space */ |
| 783 | void __iomem *cb_fn_base; /* CardBus function status addr space. */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 784 | |
| 785 | /* Some values here only for performance evaluation and path-coverage */ |
| 786 | int rx_nocopy, rx_copy, queued_packet, rx_csumhits; |
| 787 | int card_idx; |
| 788 | |
| 789 | /* The remainder are related to chip state, mostly media selection. */ |
| 790 | struct timer_list timer; /* Media selection timer. */ |
| 791 | struct timer_list rx_oom_timer; /* Rx skb allocation retry timer */ |
| 792 | int options; /* User-settable misc. driver options. */ |
| 793 | unsigned int media_override:4, /* Passed-in media type. */ |
| 794 | default_media:4, /* Read from the EEPROM/Wn3_Config. */ |
| 795 | full_duplex:1, force_fd:1, autoselect:1, |
| 796 | bus_master:1, /* Vortex can only do a fragment bus-m. */ |
| 797 | full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */ |
| 798 | flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */ |
| 799 | partner_flow_ctrl:1, /* Partner supports flow control */ |
| 800 | has_nway:1, |
| 801 | enable_wol:1, /* Wake-on-LAN is enabled */ |
| 802 | pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */ |
| 803 | open:1, |
| 804 | medialock:1, |
| 805 | must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */ |
| 806 | large_frames:1; /* accept large frames */ |
| 807 | int drv_flags; |
| 808 | u16 status_enable; |
| 809 | u16 intr_enable; |
| 810 | u16 available_media; /* From Wn3_Options. */ |
| 811 | u16 capabilities, info1, info2; /* Various, from EEPROM. */ |
| 812 | u16 advertising; /* NWay media advertisement */ |
| 813 | unsigned char phys[2]; /* MII device addresses. */ |
| 814 | u16 deferred; /* Resend these interrupts when we |
| 815 | * bale from the ISR */ |
| 816 | u16 io_size; /* Size of PCI region (for release_region) */ |
| 817 | spinlock_t lock; /* Serialise access to device & its vortex_private */ |
| 818 | struct mii_if_info mii; /* MII lib hooks/info */ |
| 819 | }; |
| 820 | |
| 821 | #ifdef CONFIG_PCI |
| 822 | #define DEVICE_PCI(dev) (((dev)->bus == &pci_bus_type) ? to_pci_dev((dev)) : NULL) |
| 823 | #else |
| 824 | #define DEVICE_PCI(dev) NULL |
| 825 | #endif |
| 826 | |
| 827 | #define VORTEX_PCI(vp) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL) |
| 828 | |
| 829 | #ifdef CONFIG_EISA |
| 830 | #define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL) |
| 831 | #else |
| 832 | #define DEVICE_EISA(dev) NULL |
| 833 | #endif |
| 834 | |
| 835 | #define VORTEX_EISA(vp) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL) |
| 836 | |
| 837 | /* The action to take with a media selection timer tick. |
| 838 | Note that we deviate from the 3Com order by checking 10base2 before AUI. |
| 839 | */ |
| 840 | enum xcvr_types { |
| 841 | XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, |
| 842 | XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10, |
| 843 | }; |
| 844 | |
Arjan van de Ven | f71e130 | 2006-03-03 21:33:57 -0500 | [diff] [blame] | 845 | static const struct media_table { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 846 | char *name; |
| 847 | unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ |
| 848 | mask:8, /* The transceiver-present bit in Wn3_Config.*/ |
| 849 | next:8; /* The media type to try next. */ |
| 850 | int wait; /* Time before we check media status. */ |
| 851 | } media_tbl[] = { |
| 852 | { "10baseT", Media_10TP,0x08, XCVR_10base2, (14*HZ)/10}, |
| 853 | { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10}, |
| 854 | { "undefined", 0, 0x80, XCVR_10baseT, 10000}, |
| 855 | { "10base2", 0, 0x10, XCVR_AUI, (1*HZ)/10}, |
| 856 | { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10}, |
| 857 | { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14*HZ)/10}, |
| 858 | { "MII", 0, 0x41, XCVR_10baseT, 3*HZ }, |
| 859 | { "undefined", 0, 0x01, XCVR_10baseT, 10000}, |
| 860 | { "Autonegotiate", 0, 0x41, XCVR_10baseT, 3*HZ}, |
| 861 | { "MII-External", 0, 0x41, XCVR_10baseT, 3*HZ }, |
| 862 | { "Default", 0, 0xFF, XCVR_10baseT, 10000}, |
| 863 | }; |
| 864 | |
| 865 | static struct { |
| 866 | const char str[ETH_GSTRING_LEN]; |
| 867 | } ethtool_stats_keys[] = { |
| 868 | { "tx_deferred" }, |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 869 | { "tx_max_collisions" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 870 | { "tx_multiple_collisions" }, |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 871 | { "tx_single_collisions" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 872 | { "rx_bad_ssd" }, |
| 873 | }; |
| 874 | |
| 875 | /* number of ETHTOOL_GSTATS u64's */ |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 876 | #define VORTEX_NUM_STATS 5 |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 877 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 878 | static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 879 | int chip_idx, int card_idx); |
| 880 | static void vortex_up(struct net_device *dev); |
| 881 | static void vortex_down(struct net_device *dev, int final); |
| 882 | static int vortex_open(struct net_device *dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 883 | static void mdio_sync(void __iomem *ioaddr, int bits); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 884 | static int mdio_read(struct net_device *dev, int phy_id, int location); |
| 885 | static void mdio_write(struct net_device *vp, int phy_id, int location, int value); |
| 886 | static void vortex_timer(unsigned long arg); |
| 887 | static void rx_oom_timer(unsigned long arg); |
| 888 | static int vortex_start_xmit(struct sk_buff *skb, struct net_device *dev); |
| 889 | static int boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev); |
| 890 | static int vortex_rx(struct net_device *dev); |
| 891 | static int boomerang_rx(struct net_device *dev); |
| 892 | static irqreturn_t vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs); |
| 893 | static irqreturn_t boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs); |
| 894 | static int vortex_close(struct net_device *dev); |
| 895 | static void dump_tx_ring(struct net_device *dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 896 | static void update_stats(void __iomem *ioaddr, struct net_device *dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 897 | static struct net_device_stats *vortex_get_stats(struct net_device *dev); |
| 898 | static void set_rx_mode(struct net_device *dev); |
| 899 | #ifdef CONFIG_PCI |
| 900 | static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
| 901 | #endif |
| 902 | static void vortex_tx_timeout(struct net_device *dev); |
| 903 | static void acpi_set_WOL(struct net_device *dev); |
| 904 | static struct ethtool_ops vortex_ethtool_ops; |
| 905 | static void set_8021q_mode(struct net_device *dev, int enable); |
| 906 | |
| 907 | |
| 908 | /* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ |
| 909 | /* Option count limit only -- unlimited interfaces are supported. */ |
| 910 | #define MAX_UNITS 8 |
John W. Linville | 9954ab7 | 2005-11-07 00:58:06 -0800 | [diff] [blame] | 911 | static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 }; |
| 912 | static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; |
| 913 | static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; |
| 914 | static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; |
| 915 | static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; |
John W. Linville | 900fd17 | 2005-11-07 00:58:08 -0800 | [diff] [blame] | 916 | static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 917 | static int global_options = -1; |
| 918 | static int global_full_duplex = -1; |
| 919 | static int global_enable_wol = -1; |
John W. Linville | 900fd17 | 2005-11-07 00:58:08 -0800 | [diff] [blame] | 920 | static int global_use_mmio = -1; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 921 | |
| 922 | /* #define dev_alloc_skb dev_alloc_skb_debug */ |
| 923 | |
| 924 | /* Variables to work-around the Compaq PCI BIOS32 problem. */ |
| 925 | static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900; |
| 926 | static struct net_device *compaq_net_device; |
| 927 | |
| 928 | static int vortex_cards_found; |
| 929 | |
| 930 | module_param(debug, int, 0); |
| 931 | module_param(global_options, int, 0); |
| 932 | module_param_array(options, int, NULL, 0); |
| 933 | module_param(global_full_duplex, int, 0); |
| 934 | module_param_array(full_duplex, int, NULL, 0); |
| 935 | module_param_array(hw_checksums, int, NULL, 0); |
| 936 | module_param_array(flow_ctrl, int, NULL, 0); |
| 937 | module_param(global_enable_wol, int, 0); |
| 938 | module_param_array(enable_wol, int, NULL, 0); |
| 939 | module_param(rx_copybreak, int, 0); |
| 940 | module_param(max_interrupt_work, int, 0); |
| 941 | module_param(compaq_ioaddr, int, 0); |
| 942 | module_param(compaq_irq, int, 0); |
| 943 | module_param(compaq_device_id, int, 0); |
| 944 | module_param(watchdog, int, 0); |
John W. Linville | 900fd17 | 2005-11-07 00:58:08 -0800 | [diff] [blame] | 945 | module_param(global_use_mmio, int, 0); |
| 946 | module_param_array(use_mmio, int, NULL, 0); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 947 | MODULE_PARM_DESC(debug, "3c59x debug level (0-6)"); |
| 948 | MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex"); |
| 949 | MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset"); |
| 950 | MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)"); |
John W. Linville | 46e5e4a | 2005-11-07 00:58:06 -0800 | [diff] [blame] | 951 | MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 952 | MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)"); |
| 953 | MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)"); |
| 954 | MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)"); |
John W. Linville | 46e5e4a | 2005-11-07 00:58:06 -0800 | [diff] [blame] | 955 | MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 956 | MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames"); |
| 957 | MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt"); |
| 958 | MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)"); |
| 959 | MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)"); |
| 960 | MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)"); |
| 961 | MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds"); |
John W. Linville | 900fd17 | 2005-11-07 00:58:08 -0800 | [diff] [blame] | 962 | MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset"); |
| 963 | MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 964 | |
| 965 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 966 | static void poll_vortex(struct net_device *dev) |
| 967 | { |
| 968 | struct vortex_private *vp = netdev_priv(dev); |
| 969 | unsigned long flags; |
| 970 | local_save_flags(flags); |
| 971 | local_irq_disable(); |
| 972 | (vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev,NULL); |
| 973 | local_irq_restore(flags); |
| 974 | } |
| 975 | #endif |
| 976 | |
| 977 | #ifdef CONFIG_PM |
| 978 | |
| 979 | static int vortex_suspend (struct pci_dev *pdev, pm_message_t state) |
| 980 | { |
| 981 | struct net_device *dev = pci_get_drvdata(pdev); |
| 982 | |
| 983 | if (dev && dev->priv) { |
| 984 | if (netif_running(dev)) { |
| 985 | netif_device_detach(dev); |
| 986 | vortex_down(dev, 1); |
| 987 | } |
Rafael J. Wysocki | 5b039e6 | 2005-09-06 15:16:22 -0700 | [diff] [blame] | 988 | pci_save_state(pdev); |
| 989 | pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); |
| 990 | free_irq(dev->irq, dev); |
| 991 | pci_disable_device(pdev); |
| 992 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 993 | } |
| 994 | return 0; |
| 995 | } |
| 996 | |
| 997 | static int vortex_resume (struct pci_dev *pdev) |
| 998 | { |
| 999 | struct net_device *dev = pci_get_drvdata(pdev); |
Rafael J. Wysocki | 5b039e6 | 2005-09-06 15:16:22 -0700 | [diff] [blame] | 1000 | struct vortex_private *vp = netdev_priv(dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1001 | |
Rafael J. Wysocki | 5b039e6 | 2005-09-06 15:16:22 -0700 | [diff] [blame] | 1002 | if (dev && vp) { |
| 1003 | pci_set_power_state(pdev, PCI_D0); |
| 1004 | pci_restore_state(pdev); |
| 1005 | pci_enable_device(pdev); |
| 1006 | pci_set_master(pdev); |
| 1007 | if (request_irq(dev->irq, vp->full_bus_master_rx ? |
| 1008 | &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev)) { |
| 1009 | printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq); |
| 1010 | pci_disable_device(pdev); |
| 1011 | return -EBUSY; |
| 1012 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1013 | if (netif_running(dev)) { |
| 1014 | vortex_up(dev); |
| 1015 | netif_device_attach(dev); |
| 1016 | } |
| 1017 | } |
| 1018 | return 0; |
| 1019 | } |
| 1020 | |
| 1021 | #endif /* CONFIG_PM */ |
| 1022 | |
| 1023 | #ifdef CONFIG_EISA |
| 1024 | static struct eisa_device_id vortex_eisa_ids[] = { |
| 1025 | { "TCM5920", CH_3C592 }, |
| 1026 | { "TCM5970", CH_3C597 }, |
| 1027 | { "" } |
| 1028 | }; |
| 1029 | |
| 1030 | static int vortex_eisa_probe (struct device *device); |
| 1031 | static int vortex_eisa_remove (struct device *device); |
| 1032 | |
| 1033 | static struct eisa_driver vortex_eisa_driver = { |
| 1034 | .id_table = vortex_eisa_ids, |
| 1035 | .driver = { |
| 1036 | .name = "3c59x", |
| 1037 | .probe = vortex_eisa_probe, |
| 1038 | .remove = vortex_eisa_remove |
| 1039 | } |
| 1040 | }; |
| 1041 | |
| 1042 | static int vortex_eisa_probe (struct device *device) |
| 1043 | { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1044 | void __iomem *ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1045 | struct eisa_device *edev; |
| 1046 | |
| 1047 | edev = to_eisa_device (device); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1048 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1049 | if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1050 | return -EBUSY; |
| 1051 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1052 | ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE); |
| 1053 | |
| 1054 | if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1055 | edev->id.driver_data, vortex_cards_found)) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1056 | release_region (edev->base_addr, VORTEX_TOTAL_SIZE); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1057 | return -ENODEV; |
| 1058 | } |
| 1059 | |
| 1060 | vortex_cards_found++; |
| 1061 | |
| 1062 | return 0; |
| 1063 | } |
| 1064 | |
| 1065 | static int vortex_eisa_remove (struct device *device) |
| 1066 | { |
| 1067 | struct eisa_device *edev; |
| 1068 | struct net_device *dev; |
| 1069 | struct vortex_private *vp; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1070 | void __iomem *ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1071 | |
| 1072 | edev = to_eisa_device (device); |
| 1073 | dev = eisa_get_drvdata (edev); |
| 1074 | |
| 1075 | if (!dev) { |
| 1076 | printk("vortex_eisa_remove called for Compaq device!\n"); |
| 1077 | BUG(); |
| 1078 | } |
| 1079 | |
| 1080 | vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1081 | ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1082 | |
| 1083 | unregister_netdev (dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1084 | iowrite16 (TotalReset|0x14, ioaddr + EL3_CMD); |
| 1085 | release_region (dev->base_addr, VORTEX_TOTAL_SIZE); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1086 | |
| 1087 | free_netdev (dev); |
| 1088 | return 0; |
| 1089 | } |
| 1090 | #endif |
| 1091 | |
| 1092 | /* returns count found (>= 0), or negative on error */ |
| 1093 | static int __init vortex_eisa_init (void) |
| 1094 | { |
| 1095 | int eisa_found = 0; |
| 1096 | int orig_cards_found = vortex_cards_found; |
| 1097 | |
| 1098 | #ifdef CONFIG_EISA |
| 1099 | if (eisa_driver_register (&vortex_eisa_driver) >= 0) { |
| 1100 | /* Because of the way EISA bus is probed, we cannot assume |
| 1101 | * any device have been found when we exit from |
| 1102 | * eisa_driver_register (the bus root driver may not be |
| 1103 | * initialized yet). So we blindly assume something was |
| 1104 | * found, and let the sysfs magic happend... */ |
| 1105 | |
| 1106 | eisa_found = 1; |
| 1107 | } |
| 1108 | #endif |
| 1109 | |
| 1110 | /* Special code to work-around the Compaq PCI BIOS32 problem. */ |
| 1111 | if (compaq_ioaddr) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1112 | vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE), |
| 1113 | compaq_irq, compaq_device_id, vortex_cards_found++); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1114 | } |
| 1115 | |
| 1116 | return vortex_cards_found - orig_cards_found + eisa_found; |
| 1117 | } |
| 1118 | |
| 1119 | /* returns count (>= 0), or negative on error */ |
| 1120 | static int __devinit vortex_init_one (struct pci_dev *pdev, |
| 1121 | const struct pci_device_id *ent) |
| 1122 | { |
John W. Linville | 900fd17 | 2005-11-07 00:58:08 -0800 | [diff] [blame] | 1123 | int rc, unit, pci_bar; |
| 1124 | struct vortex_chip_info *vci; |
| 1125 | void __iomem *ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1126 | |
| 1127 | /* wake up and enable device */ |
| 1128 | rc = pci_enable_device (pdev); |
| 1129 | if (rc < 0) |
| 1130 | goto out; |
| 1131 | |
John W. Linville | 900fd17 | 2005-11-07 00:58:08 -0800 | [diff] [blame] | 1132 | unit = vortex_cards_found; |
| 1133 | |
| 1134 | if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) { |
| 1135 | /* Determine the default if the user didn't override us */ |
| 1136 | vci = &vortex_info_tbl[ent->driver_data]; |
| 1137 | pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0; |
| 1138 | } else if (unit < MAX_UNITS && use_mmio[unit] >= 0) |
| 1139 | pci_bar = use_mmio[unit] ? 1 : 0; |
| 1140 | else |
| 1141 | pci_bar = global_use_mmio ? 1 : 0; |
| 1142 | |
| 1143 | ioaddr = pci_iomap(pdev, pci_bar, 0); |
| 1144 | if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */ |
| 1145 | ioaddr = pci_iomap(pdev, 0, 0); |
| 1146 | |
| 1147 | rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq, |
| 1148 | ent->driver_data, unit); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1149 | if (rc < 0) { |
| 1150 | pci_disable_device (pdev); |
| 1151 | goto out; |
| 1152 | } |
| 1153 | |
| 1154 | vortex_cards_found++; |
| 1155 | |
| 1156 | out: |
| 1157 | return rc; |
| 1158 | } |
| 1159 | |
| 1160 | /* |
| 1161 | * Start up the PCI/EISA device which is described by *gendev. |
| 1162 | * Return 0 on success. |
| 1163 | * |
| 1164 | * NOTE: pdev can be NULL, for the case of a Compaq device |
| 1165 | */ |
| 1166 | static int __devinit vortex_probe1(struct device *gendev, |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1167 | void __iomem *ioaddr, int irq, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1168 | int chip_idx, int card_idx) |
| 1169 | { |
| 1170 | struct vortex_private *vp; |
| 1171 | int option; |
| 1172 | unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ |
| 1173 | int i, step; |
| 1174 | struct net_device *dev; |
| 1175 | static int printed_version; |
| 1176 | int retval, print_info; |
| 1177 | struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx]; |
| 1178 | char *print_name = "3c59x"; |
| 1179 | struct pci_dev *pdev = NULL; |
| 1180 | struct eisa_device *edev = NULL; |
| 1181 | |
| 1182 | if (!printed_version) { |
| 1183 | printk (version); |
| 1184 | printed_version = 1; |
| 1185 | } |
| 1186 | |
| 1187 | if (gendev) { |
| 1188 | if ((pdev = DEVICE_PCI(gendev))) { |
| 1189 | print_name = pci_name(pdev); |
| 1190 | } |
| 1191 | |
| 1192 | if ((edev = DEVICE_EISA(gendev))) { |
| 1193 | print_name = edev->dev.bus_id; |
| 1194 | } |
| 1195 | } |
| 1196 | |
| 1197 | dev = alloc_etherdev(sizeof(*vp)); |
| 1198 | retval = -ENOMEM; |
| 1199 | if (!dev) { |
| 1200 | printk (KERN_ERR PFX "unable to allocate etherdev, aborting\n"); |
| 1201 | goto out; |
| 1202 | } |
| 1203 | SET_MODULE_OWNER(dev); |
| 1204 | SET_NETDEV_DEV(dev, gendev); |
| 1205 | vp = netdev_priv(dev); |
| 1206 | |
| 1207 | option = global_options; |
| 1208 | |
| 1209 | /* The lower four bits are the media type. */ |
| 1210 | if (dev->mem_start) { |
| 1211 | /* |
| 1212 | * The 'options' param is passed in as the third arg to the |
| 1213 | * LILO 'ether=' argument for non-modular use |
| 1214 | */ |
| 1215 | option = dev->mem_start; |
| 1216 | } |
| 1217 | else if (card_idx < MAX_UNITS) { |
| 1218 | if (options[card_idx] >= 0) |
| 1219 | option = options[card_idx]; |
| 1220 | } |
| 1221 | |
| 1222 | if (option > 0) { |
| 1223 | if (option & 0x8000) |
| 1224 | vortex_debug = 7; |
| 1225 | if (option & 0x4000) |
| 1226 | vortex_debug = 2; |
| 1227 | if (option & 0x0400) |
| 1228 | vp->enable_wol = 1; |
| 1229 | } |
| 1230 | |
| 1231 | print_info = (vortex_debug > 1); |
| 1232 | if (print_info) |
| 1233 | printk (KERN_INFO "See Documentation/networking/vortex.txt\n"); |
| 1234 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1235 | printk(KERN_INFO "%s: 3Com %s %s at %p. Vers " DRV_VERSION "\n", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1236 | print_name, |
| 1237 | pdev ? "PCI" : "EISA", |
| 1238 | vci->name, |
| 1239 | ioaddr); |
| 1240 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1241 | dev->base_addr = (unsigned long)ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1242 | dev->irq = irq; |
| 1243 | dev->mtu = mtu; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1244 | vp->ioaddr = ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1245 | vp->large_frames = mtu > 1500; |
| 1246 | vp->drv_flags = vci->drv_flags; |
| 1247 | vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0; |
| 1248 | vp->io_size = vci->io_size; |
| 1249 | vp->card_idx = card_idx; |
| 1250 | |
| 1251 | /* module list only for Compaq device */ |
| 1252 | if (gendev == NULL) { |
| 1253 | compaq_net_device = dev; |
| 1254 | } |
| 1255 | |
| 1256 | /* PCI-only startup logic */ |
| 1257 | if (pdev) { |
| 1258 | /* EISA resources already marked, so only PCI needs to do this here */ |
| 1259 | /* Ignore return value, because Cardbus drivers already allocate for us */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1260 | if (request_region(dev->base_addr, vci->io_size, print_name) != NULL) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1261 | vp->must_free_region = 1; |
| 1262 | |
| 1263 | /* enable bus-mastering if necessary */ |
| 1264 | if (vci->flags & PCI_USES_MASTER) |
| 1265 | pci_set_master (pdev); |
| 1266 | |
| 1267 | if (vci->drv_flags & IS_VORTEX) { |
| 1268 | u8 pci_latency; |
| 1269 | u8 new_latency = 248; |
| 1270 | |
| 1271 | /* Check the PCI latency value. On the 3c590 series the latency timer |
| 1272 | must be set to the maximum value to avoid data corruption that occurs |
| 1273 | when the timer expires during a transfer. This bug exists the Vortex |
| 1274 | chip only. */ |
| 1275 | pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); |
| 1276 | if (pci_latency < new_latency) { |
| 1277 | printk(KERN_INFO "%s: Overriding PCI latency" |
| 1278 | " timer (CFLT) setting of %d, new value is %d.\n", |
| 1279 | print_name, pci_latency, new_latency); |
| 1280 | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency); |
| 1281 | } |
| 1282 | } |
| 1283 | } |
| 1284 | |
| 1285 | spin_lock_init(&vp->lock); |
| 1286 | vp->gendev = gendev; |
| 1287 | vp->mii.dev = dev; |
| 1288 | vp->mii.mdio_read = mdio_read; |
| 1289 | vp->mii.mdio_write = mdio_write; |
| 1290 | vp->mii.phy_id_mask = 0x1f; |
| 1291 | vp->mii.reg_num_mask = 0x1f; |
| 1292 | |
| 1293 | /* Makes sure rings are at least 16 byte aligned. */ |
| 1294 | vp->rx_ring = pci_alloc_consistent(pdev, sizeof(struct boom_rx_desc) * RX_RING_SIZE |
| 1295 | + sizeof(struct boom_tx_desc) * TX_RING_SIZE, |
| 1296 | &vp->rx_ring_dma); |
| 1297 | retval = -ENOMEM; |
| 1298 | if (vp->rx_ring == 0) |
| 1299 | goto free_region; |
| 1300 | |
| 1301 | vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE); |
| 1302 | vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE; |
| 1303 | |
| 1304 | /* if we are a PCI driver, we store info in pdev->driver_data |
| 1305 | * instead of a module list */ |
| 1306 | if (pdev) |
| 1307 | pci_set_drvdata(pdev, dev); |
| 1308 | if (edev) |
| 1309 | eisa_set_drvdata (edev, dev); |
| 1310 | |
| 1311 | vp->media_override = 7; |
| 1312 | if (option >= 0) { |
| 1313 | vp->media_override = ((option & 7) == 2) ? 0 : option & 15; |
| 1314 | if (vp->media_override != 7) |
| 1315 | vp->medialock = 1; |
| 1316 | vp->full_duplex = (option & 0x200) ? 1 : 0; |
| 1317 | vp->bus_master = (option & 16) ? 1 : 0; |
| 1318 | } |
| 1319 | |
| 1320 | if (global_full_duplex > 0) |
| 1321 | vp->full_duplex = 1; |
| 1322 | if (global_enable_wol > 0) |
| 1323 | vp->enable_wol = 1; |
| 1324 | |
| 1325 | if (card_idx < MAX_UNITS) { |
| 1326 | if (full_duplex[card_idx] > 0) |
| 1327 | vp->full_duplex = 1; |
| 1328 | if (flow_ctrl[card_idx] > 0) |
| 1329 | vp->flow_ctrl = 1; |
| 1330 | if (enable_wol[card_idx] > 0) |
| 1331 | vp->enable_wol = 1; |
| 1332 | } |
| 1333 | |
| 1334 | vp->force_fd = vp->full_duplex; |
| 1335 | vp->options = option; |
| 1336 | /* Read the station address from the EEPROM. */ |
| 1337 | EL3WINDOW(0); |
| 1338 | { |
| 1339 | int base; |
| 1340 | |
| 1341 | if (vci->drv_flags & EEPROM_8BIT) |
| 1342 | base = 0x230; |
| 1343 | else if (vci->drv_flags & EEPROM_OFFSET) |
| 1344 | base = EEPROM_Read + 0x30; |
| 1345 | else |
| 1346 | base = EEPROM_Read; |
| 1347 | |
| 1348 | for (i = 0; i < 0x40; i++) { |
| 1349 | int timer; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1350 | iowrite16(base + i, ioaddr + Wn0EepromCmd); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1351 | /* Pause for at least 162 us. for the read to take place. */ |
| 1352 | for (timer = 10; timer >= 0; timer--) { |
| 1353 | udelay(162); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1354 | if ((ioread16(ioaddr + Wn0EepromCmd) & 0x8000) == 0) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1355 | break; |
| 1356 | } |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1357 | eeprom[i] = ioread16(ioaddr + Wn0EepromData); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1358 | } |
| 1359 | } |
| 1360 | for (i = 0; i < 0x18; i++) |
| 1361 | checksum ^= eeprom[i]; |
| 1362 | checksum = (checksum ^ (checksum >> 8)) & 0xff; |
| 1363 | if (checksum != 0x00) { /* Grrr, needless incompatible change 3Com. */ |
| 1364 | while (i < 0x21) |
| 1365 | checksum ^= eeprom[i++]; |
| 1366 | checksum = (checksum ^ (checksum >> 8)) & 0xff; |
| 1367 | } |
| 1368 | if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO)) |
| 1369 | printk(" ***INVALID CHECKSUM %4.4x*** ", checksum); |
| 1370 | for (i = 0; i < 3; i++) |
| 1371 | ((u16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]); |
John W. Linville | bb531fc | 2005-11-07 00:58:07 -0800 | [diff] [blame] | 1372 | memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1373 | if (print_info) { |
| 1374 | for (i = 0; i < 6; i++) |
| 1375 | printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]); |
| 1376 | } |
| 1377 | /* Unfortunately an all zero eeprom passes the checksum and this |
| 1378 | gets found in the wild in failure cases. Crypto is hard 8) */ |
| 1379 | if (!is_valid_ether_addr(dev->dev_addr)) { |
| 1380 | retval = -EINVAL; |
| 1381 | printk(KERN_ERR "*** EEPROM MAC address is invalid.\n"); |
| 1382 | goto free_ring; /* With every pack */ |
| 1383 | } |
| 1384 | EL3WINDOW(2); |
| 1385 | for (i = 0; i < 6; i++) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1386 | iowrite8(dev->dev_addr[i], ioaddr + i); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1387 | |
| 1388 | #ifdef __sparc__ |
| 1389 | if (print_info) |
| 1390 | printk(", IRQ %s\n", __irq_itoa(dev->irq)); |
| 1391 | #else |
| 1392 | if (print_info) |
| 1393 | printk(", IRQ %d\n", dev->irq); |
| 1394 | /* Tell them about an invalid IRQ. */ |
| 1395 | if (dev->irq <= 0 || dev->irq >= NR_IRQS) |
| 1396 | printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n", |
| 1397 | dev->irq); |
| 1398 | #endif |
| 1399 | |
| 1400 | EL3WINDOW(4); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1401 | step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1402 | if (print_info) { |
| 1403 | printk(KERN_INFO " product code %02x%02x rev %02x.%d date %02d-" |
| 1404 | "%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14], |
| 1405 | step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9); |
| 1406 | } |
| 1407 | |
| 1408 | |
| 1409 | if (pdev && vci->drv_flags & HAS_CB_FNS) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1410 | unsigned short n; |
| 1411 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1412 | vp->cb_fn_base = pci_iomap(pdev, 2, 0); |
| 1413 | if (!vp->cb_fn_base) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1414 | retval = -ENOMEM; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1415 | goto free_ring; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1416 | } |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1417 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1418 | if (print_info) { |
| 1419 | printk(KERN_INFO "%s: CardBus functions mapped %8.8lx->%p\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1420 | print_name, pci_resource_start(pdev, 2), |
| 1421 | vp->cb_fn_base); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1422 | } |
| 1423 | EL3WINDOW(2); |
| 1424 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1425 | n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1426 | if (vp->drv_flags & INVERT_LED_PWR) |
| 1427 | n |= 0x10; |
| 1428 | if (vp->drv_flags & INVERT_MII_PWR) |
| 1429 | n |= 0x4000; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1430 | iowrite16(n, ioaddr + Wn2_ResetOptions); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1431 | if (vp->drv_flags & WNO_XCVR_PWR) { |
| 1432 | EL3WINDOW(0); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1433 | iowrite16(0x0800, ioaddr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1434 | } |
| 1435 | } |
| 1436 | |
| 1437 | /* Extract our information from the EEPROM data. */ |
| 1438 | vp->info1 = eeprom[13]; |
| 1439 | vp->info2 = eeprom[15]; |
| 1440 | vp->capabilities = eeprom[16]; |
| 1441 | |
| 1442 | if (vp->info1 & 0x8000) { |
| 1443 | vp->full_duplex = 1; |
| 1444 | if (print_info) |
| 1445 | printk(KERN_INFO "Full duplex capable\n"); |
| 1446 | } |
| 1447 | |
| 1448 | { |
Arjan van de Ven | f71e130 | 2006-03-03 21:33:57 -0500 | [diff] [blame] | 1449 | static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1450 | unsigned int config; |
| 1451 | EL3WINDOW(3); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1452 | vp->available_media = ioread16(ioaddr + Wn3_Options); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1453 | if ((vp->available_media & 0xff) == 0) /* Broken 3c916 */ |
| 1454 | vp->available_media = 0x40; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1455 | config = ioread32(ioaddr + Wn3_Config); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1456 | if (print_info) { |
| 1457 | printk(KERN_DEBUG " Internal config register is %4.4x, " |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1458 | "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1459 | printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", |
| 1460 | 8 << RAM_SIZE(config), |
| 1461 | RAM_WIDTH(config) ? "word" : "byte", |
| 1462 | ram_split[RAM_SPLIT(config)], |
| 1463 | AUTOSELECT(config) ? "autoselect/" : "", |
| 1464 | XCVR(config) > XCVR_ExtMII ? "<invalid transceiver>" : |
| 1465 | media_tbl[XCVR(config)].name); |
| 1466 | } |
| 1467 | vp->default_media = XCVR(config); |
| 1468 | if (vp->default_media == XCVR_NWAY) |
| 1469 | vp->has_nway = 1; |
| 1470 | vp->autoselect = AUTOSELECT(config); |
| 1471 | } |
| 1472 | |
| 1473 | if (vp->media_override != 7) { |
| 1474 | printk(KERN_INFO "%s: Media override to transceiver type %d (%s).\n", |
| 1475 | print_name, vp->media_override, |
| 1476 | media_tbl[vp->media_override].name); |
| 1477 | dev->if_port = vp->media_override; |
| 1478 | } else |
| 1479 | dev->if_port = vp->default_media; |
| 1480 | |
| 1481 | if ((vp->available_media & 0x40) || (vci->drv_flags & HAS_NWAY) || |
| 1482 | dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { |
| 1483 | int phy, phy_idx = 0; |
| 1484 | EL3WINDOW(4); |
| 1485 | mii_preamble_required++; |
| 1486 | if (vp->drv_flags & EXTRA_PREAMBLE) |
| 1487 | mii_preamble_required++; |
| 1488 | mdio_sync(ioaddr, 32); |
Neil Horman | 106427e | 2005-11-07 00:58:03 -0800 | [diff] [blame] | 1489 | mdio_read(dev, 24, MII_BMSR); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1490 | for (phy = 0; phy < 32 && phy_idx < 1; phy++) { |
| 1491 | int mii_status, phyx; |
| 1492 | |
| 1493 | /* |
| 1494 | * For the 3c905CX we look at index 24 first, because it bogusly |
| 1495 | * reports an external PHY at all indices |
| 1496 | */ |
| 1497 | if (phy == 0) |
| 1498 | phyx = 24; |
| 1499 | else if (phy <= 24) |
| 1500 | phyx = phy - 1; |
| 1501 | else |
| 1502 | phyx = phy; |
Neil Horman | 106427e | 2005-11-07 00:58:03 -0800 | [diff] [blame] | 1503 | mii_status = mdio_read(dev, phyx, MII_BMSR); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1504 | if (mii_status && mii_status != 0xffff) { |
| 1505 | vp->phys[phy_idx++] = phyx; |
| 1506 | if (print_info) { |
| 1507 | printk(KERN_INFO " MII transceiver found at address %d," |
| 1508 | " status %4x.\n", phyx, mii_status); |
| 1509 | } |
| 1510 | if ((mii_status & 0x0040) == 0) |
| 1511 | mii_preamble_required++; |
| 1512 | } |
| 1513 | } |
| 1514 | mii_preamble_required--; |
| 1515 | if (phy_idx == 0) { |
| 1516 | printk(KERN_WARNING" ***WARNING*** No MII transceivers found!\n"); |
| 1517 | vp->phys[0] = 24; |
| 1518 | } else { |
Neil Horman | 106427e | 2005-11-07 00:58:03 -0800 | [diff] [blame] | 1519 | vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1520 | if (vp->full_duplex) { |
| 1521 | /* Only advertise the FD media types. */ |
| 1522 | vp->advertising &= ~0x02A0; |
| 1523 | mdio_write(dev, vp->phys[0], 4, vp->advertising); |
| 1524 | } |
| 1525 | } |
| 1526 | vp->mii.phy_id = vp->phys[0]; |
| 1527 | } |
| 1528 | |
| 1529 | if (vp->capabilities & CapBusMaster) { |
| 1530 | vp->full_bus_master_tx = 1; |
| 1531 | if (print_info) { |
| 1532 | printk(KERN_INFO " Enabling bus-master transmits and %s receives.\n", |
| 1533 | (vp->info2 & 1) ? "early" : "whole-frame" ); |
| 1534 | } |
| 1535 | vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2; |
| 1536 | vp->bus_master = 0; /* AKPM: vortex only */ |
| 1537 | } |
| 1538 | |
| 1539 | /* The 3c59x-specific entries in the device structure. */ |
| 1540 | dev->open = vortex_open; |
| 1541 | if (vp->full_bus_master_tx) { |
| 1542 | dev->hard_start_xmit = boomerang_start_xmit; |
| 1543 | /* Actually, it still should work with iommu. */ |
John W. Linville | 32fb5f0 | 2005-11-07 00:58:05 -0800 | [diff] [blame] | 1544 | if (card_idx < MAX_UNITS && |
| 1545 | ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) || |
| 1546 | hw_checksums[card_idx] == 1)) { |
Stephen Hemminger | d311b0d | 2005-11-07 00:58:09 -0800 | [diff] [blame] | 1547 | dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1548 | } |
| 1549 | } else { |
| 1550 | dev->hard_start_xmit = vortex_start_xmit; |
| 1551 | } |
| 1552 | |
| 1553 | if (print_info) { |
| 1554 | printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n", |
| 1555 | print_name, |
| 1556 | (dev->features & NETIF_F_SG) ? "en":"dis", |
| 1557 | (dev->features & NETIF_F_IP_CSUM) ? "en":"dis"); |
| 1558 | } |
| 1559 | |
| 1560 | dev->stop = vortex_close; |
| 1561 | dev->get_stats = vortex_get_stats; |
| 1562 | #ifdef CONFIG_PCI |
| 1563 | dev->do_ioctl = vortex_ioctl; |
| 1564 | #endif |
| 1565 | dev->ethtool_ops = &vortex_ethtool_ops; |
| 1566 | dev->set_multicast_list = set_rx_mode; |
| 1567 | dev->tx_timeout = vortex_tx_timeout; |
| 1568 | dev->watchdog_timeo = (watchdog * HZ) / 1000; |
| 1569 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 1570 | dev->poll_controller = poll_vortex; |
| 1571 | #endif |
| 1572 | if (pdev) { |
| 1573 | vp->pm_state_valid = 1; |
| 1574 | pci_save_state(VORTEX_PCI(vp)); |
| 1575 | acpi_set_WOL(dev); |
| 1576 | } |
| 1577 | retval = register_netdev(dev); |
| 1578 | if (retval == 0) |
| 1579 | return 0; |
| 1580 | |
| 1581 | free_ring: |
| 1582 | pci_free_consistent(pdev, |
| 1583 | sizeof(struct boom_rx_desc) * RX_RING_SIZE |
| 1584 | + sizeof(struct boom_tx_desc) * TX_RING_SIZE, |
| 1585 | vp->rx_ring, |
| 1586 | vp->rx_ring_dma); |
| 1587 | free_region: |
| 1588 | if (vp->must_free_region) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1589 | release_region(dev->base_addr, vci->io_size); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1590 | free_netdev(dev); |
| 1591 | printk(KERN_ERR PFX "vortex_probe1 fails. Returns %d\n", retval); |
| 1592 | out: |
| 1593 | return retval; |
| 1594 | } |
| 1595 | |
| 1596 | static void |
| 1597 | issue_and_wait(struct net_device *dev, int cmd) |
| 1598 | { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1599 | struct vortex_private *vp = netdev_priv(dev); |
| 1600 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1601 | int i; |
| 1602 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1603 | iowrite16(cmd, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1604 | for (i = 0; i < 2000; i++) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1605 | if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1606 | return; |
| 1607 | } |
| 1608 | |
| 1609 | /* OK, that didn't work. Do it the slow way. One second */ |
| 1610 | for (i = 0; i < 100000; i++) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1611 | if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1612 | if (vortex_debug > 1) |
| 1613 | printk(KERN_INFO "%s: command 0x%04x took %d usecs\n", |
| 1614 | dev->name, cmd, i * 10); |
| 1615 | return; |
| 1616 | } |
| 1617 | udelay(10); |
| 1618 | } |
| 1619 | printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1620 | dev->name, cmd, ioread16(ioaddr + EL3_STATUS)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1621 | } |
| 1622 | |
| 1623 | static void |
| 1624 | vortex_up(struct net_device *dev) |
| 1625 | { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1626 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1627 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1628 | unsigned int config; |
| 1629 | int i; |
| 1630 | |
| 1631 | if (VORTEX_PCI(vp)) { |
| 1632 | pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ |
Daniel Ritz | 3c8fad1 | 2005-05-05 16:15:44 -0700 | [diff] [blame] | 1633 | if (vp->pm_state_valid) |
| 1634 | pci_restore_state(VORTEX_PCI(vp)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1635 | pci_enable_device(VORTEX_PCI(vp)); |
| 1636 | } |
| 1637 | |
| 1638 | /* Before initializing select the active media port. */ |
| 1639 | EL3WINDOW(3); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1640 | config = ioread32(ioaddr + Wn3_Config); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1641 | |
| 1642 | if (vp->media_override != 7) { |
| 1643 | printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n", |
| 1644 | dev->name, vp->media_override, |
| 1645 | media_tbl[vp->media_override].name); |
| 1646 | dev->if_port = vp->media_override; |
| 1647 | } else if (vp->autoselect) { |
| 1648 | if (vp->has_nway) { |
| 1649 | if (vortex_debug > 1) |
| 1650 | printk(KERN_INFO "%s: using NWAY device table, not %d\n", |
| 1651 | dev->name, dev->if_port); |
| 1652 | dev->if_port = XCVR_NWAY; |
| 1653 | } else { |
| 1654 | /* Find first available media type, starting with 100baseTx. */ |
| 1655 | dev->if_port = XCVR_100baseTx; |
| 1656 | while (! (vp->available_media & media_tbl[dev->if_port].mask)) |
| 1657 | dev->if_port = media_tbl[dev->if_port].next; |
| 1658 | if (vortex_debug > 1) |
| 1659 | printk(KERN_INFO "%s: first available media type: %s\n", |
| 1660 | dev->name, media_tbl[dev->if_port].name); |
| 1661 | } |
| 1662 | } else { |
| 1663 | dev->if_port = vp->default_media; |
| 1664 | if (vortex_debug > 1) |
| 1665 | printk(KERN_INFO "%s: using default media %s\n", |
| 1666 | dev->name, media_tbl[dev->if_port].name); |
| 1667 | } |
| 1668 | |
| 1669 | init_timer(&vp->timer); |
| 1670 | vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait); |
| 1671 | vp->timer.data = (unsigned long)dev; |
| 1672 | vp->timer.function = vortex_timer; /* timer handler */ |
| 1673 | add_timer(&vp->timer); |
| 1674 | |
| 1675 | init_timer(&vp->rx_oom_timer); |
| 1676 | vp->rx_oom_timer.data = (unsigned long)dev; |
| 1677 | vp->rx_oom_timer.function = rx_oom_timer; |
| 1678 | |
| 1679 | if (vortex_debug > 1) |
| 1680 | printk(KERN_DEBUG "%s: Initial media type %s.\n", |
| 1681 | dev->name, media_tbl[dev->if_port].name); |
| 1682 | |
| 1683 | vp->full_duplex = vp->force_fd; |
| 1684 | config = BFINS(config, dev->if_port, 20, 4); |
| 1685 | if (vortex_debug > 6) |
| 1686 | printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1687 | iowrite32(config, ioaddr + Wn3_Config); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1688 | |
| 1689 | if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { |
| 1690 | int mii_reg1, mii_reg5; |
| 1691 | EL3WINDOW(4); |
| 1692 | /* Read BMSR (reg1) only to clear old status. */ |
Neil Horman | 106427e | 2005-11-07 00:58:03 -0800 | [diff] [blame] | 1693 | mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR); |
| 1694 | mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1695 | if (mii_reg5 == 0xffff || mii_reg5 == 0x0000) { |
| 1696 | netif_carrier_off(dev); /* No MII device or no link partner report */ |
| 1697 | } else { |
| 1698 | mii_reg5 &= vp->advertising; |
| 1699 | if ((mii_reg5 & 0x0100) != 0 /* 100baseTx-FD */ |
| 1700 | || (mii_reg5 & 0x00C0) == 0x0040) /* 10T-FD, but not 100-HD */ |
| 1701 | vp->full_duplex = 1; |
| 1702 | netif_carrier_on(dev); |
| 1703 | } |
| 1704 | vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0); |
| 1705 | if (vortex_debug > 1) |
| 1706 | printk(KERN_INFO "%s: MII #%d status %4.4x, link partner capability %4.4x," |
| 1707 | " info1 %04x, setting %s-duplex.\n", |
| 1708 | dev->name, vp->phys[0], |
| 1709 | mii_reg1, mii_reg5, |
| 1710 | vp->info1, ((vp->info1 & 0x8000) || vp->full_duplex) ? "full" : "half"); |
| 1711 | EL3WINDOW(3); |
| 1712 | } |
| 1713 | |
| 1714 | /* Set the full-duplex bit. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1715 | iowrite16( ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1716 | (vp->large_frames ? 0x40 : 0) | |
| 1717 | ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0), |
| 1718 | ioaddr + Wn3_MAC_Ctrl); |
| 1719 | |
| 1720 | if (vortex_debug > 1) { |
| 1721 | printk(KERN_DEBUG "%s: vortex_up() InternalConfig %8.8x.\n", |
| 1722 | dev->name, config); |
| 1723 | } |
| 1724 | |
| 1725 | issue_and_wait(dev, TxReset); |
| 1726 | /* |
| 1727 | * Don't reset the PHY - that upsets autonegotiation during DHCP operations. |
| 1728 | */ |
| 1729 | issue_and_wait(dev, RxReset|0x04); |
| 1730 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1731 | iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1732 | |
| 1733 | if (vortex_debug > 1) { |
| 1734 | EL3WINDOW(4); |
| 1735 | printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1736 | dev->name, dev->irq, ioread16(ioaddr + Wn4_Media)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1737 | } |
| 1738 | |
| 1739 | /* Set the station address and mask in window 2 each time opened. */ |
| 1740 | EL3WINDOW(2); |
| 1741 | for (i = 0; i < 6; i++) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1742 | iowrite8(dev->dev_addr[i], ioaddr + i); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1743 | for (; i < 12; i+=2) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1744 | iowrite16(0, ioaddr + i); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1745 | |
| 1746 | if (vp->cb_fn_base) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1747 | unsigned short n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1748 | if (vp->drv_flags & INVERT_LED_PWR) |
| 1749 | n |= 0x10; |
| 1750 | if (vp->drv_flags & INVERT_MII_PWR) |
| 1751 | n |= 0x4000; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1752 | iowrite16(n, ioaddr + Wn2_ResetOptions); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1753 | } |
| 1754 | |
| 1755 | if (dev->if_port == XCVR_10base2) |
| 1756 | /* Start the thinnet transceiver. We should really wait 50ms...*/ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1757 | iowrite16(StartCoax, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1758 | if (dev->if_port != XCVR_NWAY) { |
| 1759 | EL3WINDOW(4); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1760 | iowrite16((ioread16(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1761 | media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); |
| 1762 | } |
| 1763 | |
| 1764 | /* Switch to the stats window, and clear all stats by reading. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1765 | iowrite16(StatsDisable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1766 | EL3WINDOW(6); |
| 1767 | for (i = 0; i < 10; i++) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1768 | ioread8(ioaddr + i); |
| 1769 | ioread16(ioaddr + 10); |
| 1770 | ioread16(ioaddr + 12); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1771 | /* New: On the Vortex we must also clear the BadSSD counter. */ |
| 1772 | EL3WINDOW(4); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1773 | ioread8(ioaddr + 12); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1774 | /* ..and on the Boomerang we enable the extra statistics bits. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1775 | iowrite16(0x0040, ioaddr + Wn4_NetDiag); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1776 | |
| 1777 | /* Switch to register set 7 for normal use. */ |
| 1778 | EL3WINDOW(7); |
| 1779 | |
| 1780 | if (vp->full_bus_master_rx) { /* Boomerang bus master. */ |
| 1781 | vp->cur_rx = vp->dirty_rx = 0; |
| 1782 | /* Initialize the RxEarly register as recommended. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1783 | iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD); |
| 1784 | iowrite32(0x0020, ioaddr + PktStatus); |
| 1785 | iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1786 | } |
| 1787 | if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ |
| 1788 | vp->cur_tx = vp->dirty_tx = 0; |
| 1789 | if (vp->drv_flags & IS_BOOMERANG) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1790 | iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1791 | /* Clear the Rx, Tx rings. */ |
| 1792 | for (i = 0; i < RX_RING_SIZE; i++) /* AKPM: this is done in vortex_open, too */ |
| 1793 | vp->rx_ring[i].status = 0; |
| 1794 | for (i = 0; i < TX_RING_SIZE; i++) |
| 1795 | vp->tx_skbuff[i] = NULL; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1796 | iowrite32(0, ioaddr + DownListPtr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1797 | } |
| 1798 | /* Set receiver mode: presumably accept b-case and phys addr only. */ |
| 1799 | set_rx_mode(dev); |
| 1800 | /* enable 802.1q tagged frames */ |
| 1801 | set_8021q_mode(dev, 1); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1802 | iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1803 | |
| 1804 | // issue_and_wait(dev, SetTxStart|0x07ff); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1805 | iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ |
| 1806 | iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1807 | /* Allow status bits to be seen. */ |
| 1808 | vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete| |
| 1809 | (vp->full_bus_master_tx ? DownComplete : TxAvailable) | |
| 1810 | (vp->full_bus_master_rx ? UpComplete : RxComplete) | |
| 1811 | (vp->bus_master ? DMADone : 0); |
| 1812 | vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable | |
| 1813 | (vp->full_bus_master_rx ? 0 : RxComplete) | |
| 1814 | StatsFull | HostError | TxComplete | IntReq |
| 1815 | | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1816 | iowrite16(vp->status_enable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1817 | /* Ack all pending events, and set active indicator mask. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1818 | iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1819 | ioaddr + EL3_CMD); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1820 | iowrite16(vp->intr_enable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1821 | if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1822 | iowrite32(0x8000, vp->cb_fn_base + 4); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1823 | netif_start_queue (dev); |
| 1824 | } |
| 1825 | |
| 1826 | static int |
| 1827 | vortex_open(struct net_device *dev) |
| 1828 | { |
| 1829 | struct vortex_private *vp = netdev_priv(dev); |
| 1830 | int i; |
| 1831 | int retval; |
| 1832 | |
| 1833 | /* Use the now-standard shared IRQ implementation. */ |
| 1834 | if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ? |
| 1835 | &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev))) { |
| 1836 | printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq); |
| 1837 | goto out; |
| 1838 | } |
| 1839 | |
| 1840 | if (vp->full_bus_master_rx) { /* Boomerang bus master. */ |
| 1841 | if (vortex_debug > 2) |
| 1842 | printk(KERN_DEBUG "%s: Filling in the Rx ring.\n", dev->name); |
| 1843 | for (i = 0; i < RX_RING_SIZE; i++) { |
| 1844 | struct sk_buff *skb; |
| 1845 | vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1)); |
| 1846 | vp->rx_ring[i].status = 0; /* Clear complete bit. */ |
| 1847 | vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG); |
| 1848 | skb = dev_alloc_skb(PKT_BUF_SZ); |
| 1849 | vp->rx_skbuff[i] = skb; |
| 1850 | if (skb == NULL) |
| 1851 | break; /* Bad news! */ |
| 1852 | skb->dev = dev; /* Mark as being used by this device. */ |
| 1853 | skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
David S. Miller | 689be43 | 2005-06-28 15:25:31 -0700 | [diff] [blame] | 1854 | vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1855 | } |
| 1856 | if (i != RX_RING_SIZE) { |
| 1857 | int j; |
| 1858 | printk(KERN_EMERG "%s: no memory for rx ring\n", dev->name); |
| 1859 | for (j = 0; j < i; j++) { |
| 1860 | if (vp->rx_skbuff[j]) { |
| 1861 | dev_kfree_skb(vp->rx_skbuff[j]); |
| 1862 | vp->rx_skbuff[j] = NULL; |
| 1863 | } |
| 1864 | } |
| 1865 | retval = -ENOMEM; |
| 1866 | goto out_free_irq; |
| 1867 | } |
| 1868 | /* Wrap the ring. */ |
| 1869 | vp->rx_ring[i-1].next = cpu_to_le32(vp->rx_ring_dma); |
| 1870 | } |
| 1871 | |
| 1872 | vortex_up(dev); |
| 1873 | return 0; |
| 1874 | |
| 1875 | out_free_irq: |
| 1876 | free_irq(dev->irq, dev); |
| 1877 | out: |
| 1878 | if (vortex_debug > 1) |
| 1879 | printk(KERN_ERR "%s: vortex_open() fails: returning %d\n", dev->name, retval); |
| 1880 | return retval; |
| 1881 | } |
| 1882 | |
| 1883 | static void |
| 1884 | vortex_timer(unsigned long data) |
| 1885 | { |
| 1886 | struct net_device *dev = (struct net_device *)data; |
| 1887 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1888 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1889 | int next_tick = 60*HZ; |
| 1890 | int ok = 0; |
| 1891 | int media_status, mii_status, old_window; |
| 1892 | |
| 1893 | if (vortex_debug > 2) { |
| 1894 | printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n", |
| 1895 | dev->name, media_tbl[dev->if_port].name); |
| 1896 | printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo); |
| 1897 | } |
| 1898 | |
| 1899 | if (vp->medialock) |
| 1900 | goto leave_media_alone; |
| 1901 | disable_irq(dev->irq); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1902 | old_window = ioread16(ioaddr + EL3_CMD) >> 13; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1903 | EL3WINDOW(4); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1904 | media_status = ioread16(ioaddr + Wn4_Media); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1905 | switch (dev->if_port) { |
| 1906 | case XCVR_10baseT: case XCVR_100baseTx: case XCVR_100baseFx: |
| 1907 | if (media_status & Media_LnkBeat) { |
| 1908 | netif_carrier_on(dev); |
| 1909 | ok = 1; |
| 1910 | if (vortex_debug > 1) |
| 1911 | printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n", |
| 1912 | dev->name, media_tbl[dev->if_port].name, media_status); |
| 1913 | } else { |
| 1914 | netif_carrier_off(dev); |
| 1915 | if (vortex_debug > 1) { |
| 1916 | printk(KERN_DEBUG "%s: Media %s has no link beat, %x.\n", |
| 1917 | dev->name, media_tbl[dev->if_port].name, media_status); |
| 1918 | } |
| 1919 | } |
| 1920 | break; |
| 1921 | case XCVR_MII: case XCVR_NWAY: |
| 1922 | { |
| 1923 | spin_lock_bh(&vp->lock); |
Neil Horman | 106427e | 2005-11-07 00:58:03 -0800 | [diff] [blame] | 1924 | mii_status = mdio_read(dev, vp->phys[0], MII_BMSR); |
Tommy Christensen | d9e46de | 2005-11-07 00:58:04 -0800 | [diff] [blame] | 1925 | if (!(mii_status & BMSR_LSTATUS)) { |
| 1926 | /* Re-read to get actual link status */ |
| 1927 | mii_status = mdio_read(dev, vp->phys[0], MII_BMSR); |
| 1928 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1929 | ok = 1; |
| 1930 | if (vortex_debug > 2) |
| 1931 | printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n", |
| 1932 | dev->name, mii_status); |
| 1933 | if (mii_status & BMSR_LSTATUS) { |
Neil Horman | 106427e | 2005-11-07 00:58:03 -0800 | [diff] [blame] | 1934 | int mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1935 | if (! vp->force_fd && mii_reg5 != 0xffff) { |
| 1936 | int duplex; |
| 1937 | |
| 1938 | mii_reg5 &= vp->advertising; |
| 1939 | duplex = (mii_reg5&0x0100) || (mii_reg5 & 0x01C0) == 0x0040; |
| 1940 | if (vp->full_duplex != duplex) { |
| 1941 | vp->full_duplex = duplex; |
| 1942 | printk(KERN_INFO "%s: Setting %s-duplex based on MII " |
| 1943 | "#%d link partner capability of %4.4x.\n", |
| 1944 | dev->name, vp->full_duplex ? "full" : "half", |
| 1945 | vp->phys[0], mii_reg5); |
| 1946 | /* Set the full-duplex bit. */ |
| 1947 | EL3WINDOW(3); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1948 | iowrite16( (vp->full_duplex ? 0x20 : 0) | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1949 | (vp->large_frames ? 0x40 : 0) | |
| 1950 | ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0), |
| 1951 | ioaddr + Wn3_MAC_Ctrl); |
| 1952 | if (vortex_debug > 1) |
| 1953 | printk(KERN_DEBUG "Setting duplex in Wn3_MAC_Ctrl\n"); |
| 1954 | /* AKPM: bug: should reset Tx and Rx after setting Duplex. Page 180 */ |
| 1955 | } |
| 1956 | } |
| 1957 | netif_carrier_on(dev); |
| 1958 | } else { |
| 1959 | netif_carrier_off(dev); |
| 1960 | } |
| 1961 | spin_unlock_bh(&vp->lock); |
| 1962 | } |
| 1963 | break; |
| 1964 | default: /* Other media types handled by Tx timeouts. */ |
| 1965 | if (vortex_debug > 1) |
| 1966 | printk(KERN_DEBUG "%s: Media %s has no indication, %x.\n", |
| 1967 | dev->name, media_tbl[dev->if_port].name, media_status); |
| 1968 | ok = 1; |
| 1969 | } |
| 1970 | if ( ! ok) { |
| 1971 | unsigned int config; |
| 1972 | |
| 1973 | do { |
| 1974 | dev->if_port = media_tbl[dev->if_port].next; |
| 1975 | } while ( ! (vp->available_media & media_tbl[dev->if_port].mask)); |
| 1976 | if (dev->if_port == XCVR_Default) { /* Go back to default. */ |
| 1977 | dev->if_port = vp->default_media; |
| 1978 | if (vortex_debug > 1) |
| 1979 | printk(KERN_DEBUG "%s: Media selection failing, using default " |
| 1980 | "%s port.\n", |
| 1981 | dev->name, media_tbl[dev->if_port].name); |
| 1982 | } else { |
| 1983 | if (vortex_debug > 1) |
| 1984 | printk(KERN_DEBUG "%s: Media selection failed, now trying " |
| 1985 | "%s port.\n", |
| 1986 | dev->name, media_tbl[dev->if_port].name); |
| 1987 | next_tick = media_tbl[dev->if_port].wait; |
| 1988 | } |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1989 | iowrite16((media_status & ~(Media_10TP|Media_SQE)) | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1990 | media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); |
| 1991 | |
| 1992 | EL3WINDOW(3); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1993 | config = ioread32(ioaddr + Wn3_Config); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1994 | config = BFINS(config, dev->if_port, 20, 4); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1995 | iowrite32(config, ioaddr + Wn3_Config); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1996 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 1997 | iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1998 | ioaddr + EL3_CMD); |
| 1999 | if (vortex_debug > 1) |
| 2000 | printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config); |
| 2001 | /* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */ |
| 2002 | } |
| 2003 | EL3WINDOW(old_window); |
| 2004 | enable_irq(dev->irq); |
| 2005 | |
| 2006 | leave_media_alone: |
| 2007 | if (vortex_debug > 2) |
| 2008 | printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n", |
| 2009 | dev->name, media_tbl[dev->if_port].name); |
| 2010 | |
| 2011 | mod_timer(&vp->timer, RUN_AT(next_tick)); |
| 2012 | if (vp->deferred) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2013 | iowrite16(FakeIntr, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2014 | return; |
| 2015 | } |
| 2016 | |
| 2017 | static void vortex_tx_timeout(struct net_device *dev) |
| 2018 | { |
| 2019 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2020 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2021 | |
| 2022 | printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2023 | dev->name, ioread8(ioaddr + TxStatus), |
| 2024 | ioread16(ioaddr + EL3_STATUS)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2025 | EL3WINDOW(4); |
| 2026 | printk(KERN_ERR " diagnostics: net %04x media %04x dma %08x fifo %04x\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2027 | ioread16(ioaddr + Wn4_NetDiag), |
| 2028 | ioread16(ioaddr + Wn4_Media), |
| 2029 | ioread32(ioaddr + PktStatus), |
| 2030 | ioread16(ioaddr + Wn4_FIFODiag)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2031 | /* Slight code bloat to be user friendly. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2032 | if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2033 | printk(KERN_ERR "%s: Transmitter encountered 16 collisions --" |
| 2034 | " network cable problem?\n", dev->name); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2035 | if (ioread16(ioaddr + EL3_STATUS) & IntLatch) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2036 | printk(KERN_ERR "%s: Interrupt posted but not delivered --" |
| 2037 | " IRQ blocked by another device?\n", dev->name); |
| 2038 | /* Bad idea here.. but we might as well handle a few events. */ |
| 2039 | { |
| 2040 | /* |
| 2041 | * Block interrupts because vortex_interrupt does a bare spin_lock() |
| 2042 | */ |
| 2043 | unsigned long flags; |
| 2044 | local_irq_save(flags); |
| 2045 | if (vp->full_bus_master_tx) |
| 2046 | boomerang_interrupt(dev->irq, dev, NULL); |
| 2047 | else |
| 2048 | vortex_interrupt(dev->irq, dev, NULL); |
| 2049 | local_irq_restore(flags); |
| 2050 | } |
| 2051 | } |
| 2052 | |
| 2053 | if (vortex_debug > 0) |
| 2054 | dump_tx_ring(dev); |
| 2055 | |
| 2056 | issue_and_wait(dev, TxReset); |
| 2057 | |
| 2058 | vp->stats.tx_errors++; |
| 2059 | if (vp->full_bus_master_tx) { |
| 2060 | printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2061 | if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0) |
| 2062 | iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2063 | ioaddr + DownListPtr); |
| 2064 | if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE) |
| 2065 | netif_wake_queue (dev); |
| 2066 | if (vp->drv_flags & IS_BOOMERANG) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2067 | iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); |
| 2068 | iowrite16(DownUnstall, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2069 | } else { |
| 2070 | vp->stats.tx_dropped++; |
| 2071 | netif_wake_queue(dev); |
| 2072 | } |
| 2073 | |
| 2074 | /* Issue Tx Enable */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2075 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2076 | dev->trans_start = jiffies; |
| 2077 | |
| 2078 | /* Switch to register set 7 for normal use. */ |
| 2079 | EL3WINDOW(7); |
| 2080 | } |
| 2081 | |
| 2082 | /* |
| 2083 | * Handle uncommon interrupt sources. This is a separate routine to minimize |
| 2084 | * the cache impact. |
| 2085 | */ |
| 2086 | static void |
| 2087 | vortex_error(struct net_device *dev, int status) |
| 2088 | { |
| 2089 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2090 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2091 | int do_tx_reset = 0, reset_mask = 0; |
| 2092 | unsigned char tx_status = 0; |
| 2093 | |
| 2094 | if (vortex_debug > 2) { |
| 2095 | printk(KERN_ERR "%s: vortex_error(), status=0x%x\n", dev->name, status); |
| 2096 | } |
| 2097 | |
| 2098 | if (status & TxComplete) { /* Really "TxError" for us. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2099 | tx_status = ioread8(ioaddr + TxStatus); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2100 | /* Presumably a tx-timeout. We must merely re-enable. */ |
| 2101 | if (vortex_debug > 2 |
| 2102 | || (tx_status != 0x88 && vortex_debug > 0)) { |
| 2103 | printk(KERN_ERR "%s: Transmit error, Tx status register %2.2x.\n", |
| 2104 | dev->name, tx_status); |
| 2105 | if (tx_status == 0x82) { |
| 2106 | printk(KERN_ERR "Probably a duplex mismatch. See " |
| 2107 | "Documentation/networking/vortex.txt\n"); |
| 2108 | } |
| 2109 | dump_tx_ring(dev); |
| 2110 | } |
| 2111 | if (tx_status & 0x14) vp->stats.tx_fifo_errors++; |
| 2112 | if (tx_status & 0x38) vp->stats.tx_aborted_errors++; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2113 | iowrite8(0, ioaddr + TxStatus); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2114 | if (tx_status & 0x30) { /* txJabber or txUnderrun */ |
| 2115 | do_tx_reset = 1; |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 2116 | } else if (tx_status & 0x08) { /* maxCollisions */ |
| 2117 | vp->xstats.tx_max_collisions++; |
| 2118 | if (vp->drv_flags & MAX_COLLISION_RESET) { |
| 2119 | do_tx_reset = 1; |
| 2120 | reset_mask = 0x0108; /* Reset interface logic, but not download logic */ |
| 2121 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2122 | } else { /* Merely re-enable the transmitter. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2123 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2124 | } |
| 2125 | } |
| 2126 | |
| 2127 | if (status & RxEarly) { /* Rx early is unused. */ |
| 2128 | vortex_rx(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2129 | iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2130 | } |
| 2131 | if (status & StatsFull) { /* Empty statistics. */ |
| 2132 | static int DoneDidThat; |
| 2133 | if (vortex_debug > 4) |
| 2134 | printk(KERN_DEBUG "%s: Updating stats.\n", dev->name); |
| 2135 | update_stats(ioaddr, dev); |
| 2136 | /* HACK: Disable statistics as an interrupt source. */ |
| 2137 | /* This occurs when we have the wrong media type! */ |
| 2138 | if (DoneDidThat == 0 && |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2139 | ioread16(ioaddr + EL3_STATUS) & StatsFull) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2140 | printk(KERN_WARNING "%s: Updating statistics failed, disabling " |
| 2141 | "stats as an interrupt source.\n", dev->name); |
| 2142 | EL3WINDOW(5); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2143 | iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2144 | vp->intr_enable &= ~StatsFull; |
| 2145 | EL3WINDOW(7); |
| 2146 | DoneDidThat++; |
| 2147 | } |
| 2148 | } |
| 2149 | if (status & IntReq) { /* Restore all interrupt sources. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2150 | iowrite16(vp->status_enable, ioaddr + EL3_CMD); |
| 2151 | iowrite16(vp->intr_enable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2152 | } |
| 2153 | if (status & HostError) { |
| 2154 | u16 fifo_diag; |
| 2155 | EL3WINDOW(4); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2156 | fifo_diag = ioread16(ioaddr + Wn4_FIFODiag); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2157 | printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n", |
| 2158 | dev->name, fifo_diag); |
| 2159 | /* Adapter failure requires Tx/Rx reset and reinit. */ |
| 2160 | if (vp->full_bus_master_tx) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2161 | int bus_status = ioread32(ioaddr + PktStatus); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2162 | /* 0x80000000 PCI master abort. */ |
| 2163 | /* 0x40000000 PCI target abort. */ |
| 2164 | if (vortex_debug) |
| 2165 | printk(KERN_ERR "%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status); |
| 2166 | |
| 2167 | /* In this case, blow the card away */ |
| 2168 | /* Must not enter D3 or we can't legally issue the reset! */ |
| 2169 | vortex_down(dev, 0); |
| 2170 | issue_and_wait(dev, TotalReset | 0xff); |
| 2171 | vortex_up(dev); /* AKPM: bug. vortex_up() assumes that the rx ring is full. It may not be. */ |
| 2172 | } else if (fifo_diag & 0x0400) |
| 2173 | do_tx_reset = 1; |
| 2174 | if (fifo_diag & 0x3000) { |
| 2175 | /* Reset Rx fifo and upload logic */ |
| 2176 | issue_and_wait(dev, RxReset|0x07); |
| 2177 | /* Set the Rx filter to the current state. */ |
| 2178 | set_rx_mode(dev); |
| 2179 | /* enable 802.1q VLAN tagged frames */ |
| 2180 | set_8021q_mode(dev, 1); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2181 | iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ |
| 2182 | iowrite16(AckIntr | HostError, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2183 | } |
| 2184 | } |
| 2185 | |
| 2186 | if (do_tx_reset) { |
| 2187 | issue_and_wait(dev, TxReset|reset_mask); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2188 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2189 | if (!vp->full_bus_master_tx) |
| 2190 | netif_wake_queue(dev); |
| 2191 | } |
| 2192 | } |
| 2193 | |
| 2194 | static int |
| 2195 | vortex_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| 2196 | { |
| 2197 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2198 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2199 | |
| 2200 | /* Put out the doubleword header... */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2201 | iowrite32(skb->len, ioaddr + TX_FIFO); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2202 | if (vp->bus_master) { |
| 2203 | /* Set the bus-master controller to transfer the packet. */ |
| 2204 | int len = (skb->len + 3) & ~3; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2205 | iowrite32( vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2206 | ioaddr + Wn7_MasterAddr); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2207 | iowrite16(len, ioaddr + Wn7_MasterLen); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2208 | vp->tx_skb = skb; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2209 | iowrite16(StartDMADown, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2210 | /* netif_wake_queue() will be called at the DMADone interrupt. */ |
| 2211 | } else { |
| 2212 | /* ... and the packet rounded to a doubleword. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2213 | iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2214 | dev_kfree_skb (skb); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2215 | if (ioread16(ioaddr + TxFree) > 1536) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2216 | netif_start_queue (dev); /* AKPM: redundant? */ |
| 2217 | } else { |
| 2218 | /* Interrupt us when the FIFO has room for max-sized packet. */ |
| 2219 | netif_stop_queue(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2220 | iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2221 | } |
| 2222 | } |
| 2223 | |
| 2224 | dev->trans_start = jiffies; |
| 2225 | |
| 2226 | /* Clear the Tx status stack. */ |
| 2227 | { |
| 2228 | int tx_status; |
| 2229 | int i = 32; |
| 2230 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2231 | while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2232 | if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ |
| 2233 | if (vortex_debug > 2) |
| 2234 | printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n", |
| 2235 | dev->name, tx_status); |
| 2236 | if (tx_status & 0x04) vp->stats.tx_fifo_errors++; |
| 2237 | if (tx_status & 0x38) vp->stats.tx_aborted_errors++; |
| 2238 | if (tx_status & 0x30) { |
| 2239 | issue_and_wait(dev, TxReset); |
| 2240 | } |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2241 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2242 | } |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2243 | iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2244 | } |
| 2245 | } |
| 2246 | return 0; |
| 2247 | } |
| 2248 | |
| 2249 | static int |
| 2250 | boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| 2251 | { |
| 2252 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2253 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2254 | /* Calculate the next Tx descriptor entry. */ |
| 2255 | int entry = vp->cur_tx % TX_RING_SIZE; |
| 2256 | struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE]; |
| 2257 | unsigned long flags; |
| 2258 | |
| 2259 | if (vortex_debug > 6) { |
| 2260 | printk(KERN_DEBUG "boomerang_start_xmit()\n"); |
John W. Linville | 0f667ff | 2005-06-21 17:15:14 -0700 | [diff] [blame] | 2261 | printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n", |
| 2262 | dev->name, vp->cur_tx); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2263 | } |
| 2264 | |
| 2265 | if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) { |
| 2266 | if (vortex_debug > 0) |
| 2267 | printk(KERN_WARNING "%s: BUG! Tx Ring full, refusing to send buffer.\n", |
| 2268 | dev->name); |
| 2269 | netif_stop_queue(dev); |
| 2270 | return 1; |
| 2271 | } |
| 2272 | |
| 2273 | vp->tx_skbuff[entry] = skb; |
| 2274 | |
| 2275 | vp->tx_ring[entry].next = 0; |
| 2276 | #if DO_ZEROCOPY |
| 2277 | if (skb->ip_summed != CHECKSUM_HW) |
| 2278 | vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); |
| 2279 | else |
| 2280 | vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum); |
| 2281 | |
| 2282 | if (!skb_shinfo(skb)->nr_frags) { |
| 2283 | vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, |
| 2284 | skb->len, PCI_DMA_TODEVICE)); |
| 2285 | vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG); |
| 2286 | } else { |
| 2287 | int i; |
| 2288 | |
| 2289 | vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, |
| 2290 | skb->len-skb->data_len, PCI_DMA_TODEVICE)); |
| 2291 | vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len-skb->data_len); |
| 2292 | |
| 2293 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { |
| 2294 | skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; |
| 2295 | |
| 2296 | vp->tx_ring[entry].frag[i+1].addr = |
| 2297 | cpu_to_le32(pci_map_single(VORTEX_PCI(vp), |
| 2298 | (void*)page_address(frag->page) + frag->page_offset, |
| 2299 | frag->size, PCI_DMA_TODEVICE)); |
| 2300 | |
| 2301 | if (i == skb_shinfo(skb)->nr_frags-1) |
| 2302 | vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size|LAST_FRAG); |
| 2303 | else |
| 2304 | vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size); |
| 2305 | } |
| 2306 | } |
| 2307 | #else |
| 2308 | vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE)); |
| 2309 | vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG); |
| 2310 | vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); |
| 2311 | #endif |
| 2312 | |
| 2313 | spin_lock_irqsave(&vp->lock, flags); |
| 2314 | /* Wait for the stall to complete. */ |
| 2315 | issue_and_wait(dev, DownStall); |
| 2316 | prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2317 | if (ioread32(ioaddr + DownListPtr) == 0) { |
| 2318 | iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2319 | vp->queued_packet++; |
| 2320 | } |
| 2321 | |
| 2322 | vp->cur_tx++; |
| 2323 | if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) { |
| 2324 | netif_stop_queue (dev); |
| 2325 | } else { /* Clear previous interrupt enable. */ |
| 2326 | #if defined(tx_interrupt_mitigation) |
| 2327 | /* Dubious. If in boomeang_interrupt "faster" cyclone ifdef |
| 2328 | * were selected, this would corrupt DN_COMPLETE. No? |
| 2329 | */ |
| 2330 | prev_entry->status &= cpu_to_le32(~TxIntrUploaded); |
| 2331 | #endif |
| 2332 | } |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2333 | iowrite16(DownUnstall, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2334 | spin_unlock_irqrestore(&vp->lock, flags); |
| 2335 | dev->trans_start = jiffies; |
| 2336 | return 0; |
| 2337 | } |
| 2338 | |
| 2339 | /* The interrupt handler does all of the Rx thread work and cleans up |
| 2340 | after the Tx thread. */ |
| 2341 | |
| 2342 | /* |
| 2343 | * This is the ISR for the vortex series chips. |
| 2344 | * full_bus_master_tx == 0 && full_bus_master_rx == 0 |
| 2345 | */ |
| 2346 | |
| 2347 | static irqreturn_t |
| 2348 | vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| 2349 | { |
| 2350 | struct net_device *dev = dev_id; |
| 2351 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2352 | void __iomem *ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2353 | int status; |
| 2354 | int work_done = max_interrupt_work; |
| 2355 | int handled = 0; |
| 2356 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2357 | ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2358 | spin_lock(&vp->lock); |
| 2359 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2360 | status = ioread16(ioaddr + EL3_STATUS); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2361 | |
| 2362 | if (vortex_debug > 6) |
| 2363 | printk("vortex_interrupt(). status=0x%4x\n", status); |
| 2364 | |
| 2365 | if ((status & IntLatch) == 0) |
| 2366 | goto handler_exit; /* No interrupt: shared IRQs cause this */ |
| 2367 | handled = 1; |
| 2368 | |
| 2369 | if (status & IntReq) { |
| 2370 | status |= vp->deferred; |
| 2371 | vp->deferred = 0; |
| 2372 | } |
| 2373 | |
| 2374 | if (status == 0xffff) /* h/w no longer present (hotplug)? */ |
| 2375 | goto handler_exit; |
| 2376 | |
| 2377 | if (vortex_debug > 4) |
| 2378 | printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2379 | dev->name, status, ioread8(ioaddr + Timer)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2380 | |
| 2381 | do { |
| 2382 | if (vortex_debug > 5) |
| 2383 | printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n", |
| 2384 | dev->name, status); |
| 2385 | if (status & RxComplete) |
| 2386 | vortex_rx(dev); |
| 2387 | |
| 2388 | if (status & TxAvailable) { |
| 2389 | if (vortex_debug > 5) |
| 2390 | printk(KERN_DEBUG " TX room bit was handled.\n"); |
| 2391 | /* There's room in the FIFO for a full-sized packet. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2392 | iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2393 | netif_wake_queue (dev); |
| 2394 | } |
| 2395 | |
| 2396 | if (status & DMADone) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2397 | if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) { |
| 2398 | iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2399 | pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE); |
| 2400 | dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2401 | if (ioread16(ioaddr + TxFree) > 1536) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2402 | /* |
| 2403 | * AKPM: FIXME: I don't think we need this. If the queue was stopped due to |
| 2404 | * insufficient FIFO room, the TxAvailable test will succeed and call |
| 2405 | * netif_wake_queue() |
| 2406 | */ |
| 2407 | netif_wake_queue(dev); |
| 2408 | } else { /* Interrupt when FIFO has room for max-sized packet. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2409 | iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2410 | netif_stop_queue(dev); |
| 2411 | } |
| 2412 | } |
| 2413 | } |
| 2414 | /* Check for all uncommon interrupts at once. */ |
| 2415 | if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) { |
| 2416 | if (status == 0xffff) |
| 2417 | break; |
| 2418 | vortex_error(dev, status); |
| 2419 | } |
| 2420 | |
| 2421 | if (--work_done < 0) { |
| 2422 | printk(KERN_WARNING "%s: Too much work in interrupt, status " |
| 2423 | "%4.4x.\n", dev->name, status); |
| 2424 | /* Disable all pending interrupts. */ |
| 2425 | do { |
| 2426 | vp->deferred |= status; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2427 | iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2428 | ioaddr + EL3_CMD); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2429 | iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); |
| 2430 | } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2431 | /* The timer will reenable interrupts. */ |
| 2432 | mod_timer(&vp->timer, jiffies + 1*HZ); |
| 2433 | break; |
| 2434 | } |
| 2435 | /* Acknowledge the IRQ. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2436 | iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); |
| 2437 | } while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2438 | |
| 2439 | if (vortex_debug > 4) |
| 2440 | printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", |
| 2441 | dev->name, status); |
| 2442 | handler_exit: |
| 2443 | spin_unlock(&vp->lock); |
| 2444 | return IRQ_RETVAL(handled); |
| 2445 | } |
| 2446 | |
| 2447 | /* |
| 2448 | * This is the ISR for the boomerang series chips. |
| 2449 | * full_bus_master_tx == 1 && full_bus_master_rx == 1 |
| 2450 | */ |
| 2451 | |
| 2452 | static irqreturn_t |
| 2453 | boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| 2454 | { |
| 2455 | struct net_device *dev = dev_id; |
| 2456 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2457 | void __iomem *ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2458 | int status; |
| 2459 | int work_done = max_interrupt_work; |
| 2460 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2461 | ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2462 | |
| 2463 | /* |
| 2464 | * It seems dopey to put the spinlock this early, but we could race against vortex_tx_timeout |
| 2465 | * and boomerang_start_xmit |
| 2466 | */ |
| 2467 | spin_lock(&vp->lock); |
| 2468 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2469 | status = ioread16(ioaddr + EL3_STATUS); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2470 | |
| 2471 | if (vortex_debug > 6) |
| 2472 | printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status); |
| 2473 | |
| 2474 | if ((status & IntLatch) == 0) |
| 2475 | goto handler_exit; /* No interrupt: shared IRQs can cause this */ |
| 2476 | |
| 2477 | if (status == 0xffff) { /* h/w no longer present (hotplug)? */ |
| 2478 | if (vortex_debug > 1) |
| 2479 | printk(KERN_DEBUG "boomerang_interrupt(1): status = 0xffff\n"); |
| 2480 | goto handler_exit; |
| 2481 | } |
| 2482 | |
| 2483 | if (status & IntReq) { |
| 2484 | status |= vp->deferred; |
| 2485 | vp->deferred = 0; |
| 2486 | } |
| 2487 | |
| 2488 | if (vortex_debug > 4) |
| 2489 | printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2490 | dev->name, status, ioread8(ioaddr + Timer)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2491 | do { |
| 2492 | if (vortex_debug > 5) |
| 2493 | printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n", |
| 2494 | dev->name, status); |
| 2495 | if (status & UpComplete) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2496 | iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2497 | if (vortex_debug > 5) |
| 2498 | printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n"); |
| 2499 | boomerang_rx(dev); |
| 2500 | } |
| 2501 | |
| 2502 | if (status & DownComplete) { |
| 2503 | unsigned int dirty_tx = vp->dirty_tx; |
| 2504 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2505 | iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2506 | while (vp->cur_tx - dirty_tx > 0) { |
| 2507 | int entry = dirty_tx % TX_RING_SIZE; |
| 2508 | #if 1 /* AKPM: the latter is faster, but cyclone-only */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2509 | if (ioread32(ioaddr + DownListPtr) == |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2510 | vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)) |
| 2511 | break; /* It still hasn't been processed. */ |
| 2512 | #else |
| 2513 | if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0) |
| 2514 | break; /* It still hasn't been processed. */ |
| 2515 | #endif |
| 2516 | |
| 2517 | if (vp->tx_skbuff[entry]) { |
| 2518 | struct sk_buff *skb = vp->tx_skbuff[entry]; |
| 2519 | #if DO_ZEROCOPY |
| 2520 | int i; |
| 2521 | for (i=0; i<=skb_shinfo(skb)->nr_frags; i++) |
| 2522 | pci_unmap_single(VORTEX_PCI(vp), |
| 2523 | le32_to_cpu(vp->tx_ring[entry].frag[i].addr), |
| 2524 | le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF, |
| 2525 | PCI_DMA_TODEVICE); |
| 2526 | #else |
| 2527 | pci_unmap_single(VORTEX_PCI(vp), |
| 2528 | le32_to_cpu(vp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE); |
| 2529 | #endif |
| 2530 | dev_kfree_skb_irq(skb); |
| 2531 | vp->tx_skbuff[entry] = NULL; |
| 2532 | } else { |
| 2533 | printk(KERN_DEBUG "boomerang_interrupt: no skb!\n"); |
| 2534 | } |
| 2535 | /* vp->stats.tx_packets++; Counted below. */ |
| 2536 | dirty_tx++; |
| 2537 | } |
| 2538 | vp->dirty_tx = dirty_tx; |
| 2539 | if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) { |
| 2540 | if (vortex_debug > 6) |
| 2541 | printk(KERN_DEBUG "boomerang_interrupt: wake queue\n"); |
| 2542 | netif_wake_queue (dev); |
| 2543 | } |
| 2544 | } |
| 2545 | |
| 2546 | /* Check for all uncommon interrupts at once. */ |
| 2547 | if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) |
| 2548 | vortex_error(dev, status); |
| 2549 | |
| 2550 | if (--work_done < 0) { |
| 2551 | printk(KERN_WARNING "%s: Too much work in interrupt, status " |
| 2552 | "%4.4x.\n", dev->name, status); |
| 2553 | /* Disable all pending interrupts. */ |
| 2554 | do { |
| 2555 | vp->deferred |= status; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2556 | iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2557 | ioaddr + EL3_CMD); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2558 | iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); |
| 2559 | } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2560 | /* The timer will reenable interrupts. */ |
| 2561 | mod_timer(&vp->timer, jiffies + 1*HZ); |
| 2562 | break; |
| 2563 | } |
| 2564 | /* Acknowledge the IRQ. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2565 | iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2566 | if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2567 | iowrite32(0x8000, vp->cb_fn_base + 4); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2568 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2569 | } while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2570 | |
| 2571 | if (vortex_debug > 4) |
| 2572 | printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", |
| 2573 | dev->name, status); |
| 2574 | handler_exit: |
| 2575 | spin_unlock(&vp->lock); |
| 2576 | return IRQ_HANDLED; |
| 2577 | } |
| 2578 | |
| 2579 | static int vortex_rx(struct net_device *dev) |
| 2580 | { |
| 2581 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2582 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2583 | int i; |
| 2584 | short rx_status; |
| 2585 | |
| 2586 | if (vortex_debug > 5) |
| 2587 | printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2588 | ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus)); |
| 2589 | while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2590 | if (rx_status & 0x4000) { /* Error, update stats. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2591 | unsigned char rx_error = ioread8(ioaddr + RxErrors); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2592 | if (vortex_debug > 2) |
| 2593 | printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error); |
| 2594 | vp->stats.rx_errors++; |
| 2595 | if (rx_error & 0x01) vp->stats.rx_over_errors++; |
| 2596 | if (rx_error & 0x02) vp->stats.rx_length_errors++; |
| 2597 | if (rx_error & 0x04) vp->stats.rx_frame_errors++; |
| 2598 | if (rx_error & 0x08) vp->stats.rx_crc_errors++; |
| 2599 | if (rx_error & 0x10) vp->stats.rx_length_errors++; |
| 2600 | } else { |
| 2601 | /* The packet length: up to 4.5K!. */ |
| 2602 | int pkt_len = rx_status & 0x1fff; |
| 2603 | struct sk_buff *skb; |
| 2604 | |
| 2605 | skb = dev_alloc_skb(pkt_len + 5); |
| 2606 | if (vortex_debug > 4) |
| 2607 | printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n", |
| 2608 | pkt_len, rx_status); |
| 2609 | if (skb != NULL) { |
| 2610 | skb->dev = dev; |
| 2611 | skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
| 2612 | /* 'skb_put()' points to the start of sk_buff data area. */ |
| 2613 | if (vp->bus_master && |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2614 | ! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2615 | dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len), |
| 2616 | pkt_len, PCI_DMA_FROMDEVICE); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2617 | iowrite32(dma, ioaddr + Wn7_MasterAddr); |
| 2618 | iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen); |
| 2619 | iowrite16(StartDMAUp, ioaddr + EL3_CMD); |
| 2620 | while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2621 | ; |
| 2622 | pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE); |
| 2623 | } else { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2624 | ioread32_rep(ioaddr + RX_FIFO, |
| 2625 | skb_put(skb, pkt_len), |
| 2626 | (pkt_len + 3) >> 2); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2627 | } |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2628 | iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2629 | skb->protocol = eth_type_trans(skb, dev); |
| 2630 | netif_rx(skb); |
| 2631 | dev->last_rx = jiffies; |
| 2632 | vp->stats.rx_packets++; |
| 2633 | /* Wait a limited time to go to next packet. */ |
| 2634 | for (i = 200; i >= 0; i--) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2635 | if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2636 | break; |
| 2637 | continue; |
| 2638 | } else if (vortex_debug > 0) |
| 2639 | printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of " |
| 2640 | "size %d.\n", dev->name, pkt_len); |
John W. Linville | 35b3067 | 2005-11-07 00:58:08 -0800 | [diff] [blame] | 2641 | vp->stats.rx_dropped++; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2642 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2643 | issue_and_wait(dev, RxDiscard); |
| 2644 | } |
| 2645 | |
| 2646 | return 0; |
| 2647 | } |
| 2648 | |
| 2649 | static int |
| 2650 | boomerang_rx(struct net_device *dev) |
| 2651 | { |
| 2652 | struct vortex_private *vp = netdev_priv(dev); |
| 2653 | int entry = vp->cur_rx % RX_RING_SIZE; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2654 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2655 | int rx_status; |
| 2656 | int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx; |
| 2657 | |
| 2658 | if (vortex_debug > 5) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2659 | printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2660 | |
| 2661 | while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){ |
| 2662 | if (--rx_work_limit < 0) |
| 2663 | break; |
| 2664 | if (rx_status & RxDError) { /* Error, update stats. */ |
| 2665 | unsigned char rx_error = rx_status >> 16; |
| 2666 | if (vortex_debug > 2) |
| 2667 | printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error); |
| 2668 | vp->stats.rx_errors++; |
| 2669 | if (rx_error & 0x01) vp->stats.rx_over_errors++; |
| 2670 | if (rx_error & 0x02) vp->stats.rx_length_errors++; |
| 2671 | if (rx_error & 0x04) vp->stats.rx_frame_errors++; |
| 2672 | if (rx_error & 0x08) vp->stats.rx_crc_errors++; |
| 2673 | if (rx_error & 0x10) vp->stats.rx_length_errors++; |
| 2674 | } else { |
| 2675 | /* The packet length: up to 4.5K!. */ |
| 2676 | int pkt_len = rx_status & 0x1fff; |
| 2677 | struct sk_buff *skb; |
| 2678 | dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr); |
| 2679 | |
| 2680 | if (vortex_debug > 4) |
| 2681 | printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n", |
| 2682 | pkt_len, rx_status); |
| 2683 | |
| 2684 | /* Check if the packet is long enough to just accept without |
| 2685 | copying to a properly sized skbuff. */ |
| 2686 | if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != 0) { |
| 2687 | skb->dev = dev; |
| 2688 | skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
| 2689 | pci_dma_sync_single_for_cpu(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); |
| 2690 | /* 'skb_put()' points to the start of sk_buff data area. */ |
| 2691 | memcpy(skb_put(skb, pkt_len), |
David S. Miller | 689be43 | 2005-06-28 15:25:31 -0700 | [diff] [blame] | 2692 | vp->rx_skbuff[entry]->data, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2693 | pkt_len); |
| 2694 | pci_dma_sync_single_for_device(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); |
| 2695 | vp->rx_copy++; |
| 2696 | } else { |
| 2697 | /* Pass up the skbuff already on the Rx ring. */ |
| 2698 | skb = vp->rx_skbuff[entry]; |
| 2699 | vp->rx_skbuff[entry] = NULL; |
| 2700 | skb_put(skb, pkt_len); |
| 2701 | pci_unmap_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); |
| 2702 | vp->rx_nocopy++; |
| 2703 | } |
| 2704 | skb->protocol = eth_type_trans(skb, dev); |
| 2705 | { /* Use hardware checksum info. */ |
| 2706 | int csum_bits = rx_status & 0xee000000; |
| 2707 | if (csum_bits && |
| 2708 | (csum_bits == (IPChksumValid | TCPChksumValid) || |
| 2709 | csum_bits == (IPChksumValid | UDPChksumValid))) { |
| 2710 | skb->ip_summed = CHECKSUM_UNNECESSARY; |
| 2711 | vp->rx_csumhits++; |
| 2712 | } |
| 2713 | } |
| 2714 | netif_rx(skb); |
| 2715 | dev->last_rx = jiffies; |
| 2716 | vp->stats.rx_packets++; |
| 2717 | } |
| 2718 | entry = (++vp->cur_rx) % RX_RING_SIZE; |
| 2719 | } |
| 2720 | /* Refill the Rx ring buffers. */ |
| 2721 | for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { |
| 2722 | struct sk_buff *skb; |
| 2723 | entry = vp->dirty_rx % RX_RING_SIZE; |
| 2724 | if (vp->rx_skbuff[entry] == NULL) { |
| 2725 | skb = dev_alloc_skb(PKT_BUF_SZ); |
| 2726 | if (skb == NULL) { |
| 2727 | static unsigned long last_jif; |
Marcelo Feitoza Parisi | ff5688a | 2006-01-09 18:37:15 -0800 | [diff] [blame] | 2728 | if (time_after(jiffies, last_jif + 10 * HZ)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2729 | printk(KERN_WARNING "%s: memory shortage\n", dev->name); |
| 2730 | last_jif = jiffies; |
| 2731 | } |
| 2732 | if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) |
| 2733 | mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1)); |
| 2734 | break; /* Bad news! */ |
| 2735 | } |
| 2736 | skb->dev = dev; /* Mark as being used by this device. */ |
| 2737 | skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
David S. Miller | 689be43 | 2005-06-28 15:25:31 -0700 | [diff] [blame] | 2738 | vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2739 | vp->rx_skbuff[entry] = skb; |
| 2740 | } |
| 2741 | vp->rx_ring[entry].status = 0; /* Clear complete bit. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2742 | iowrite16(UpUnstall, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2743 | } |
| 2744 | return 0; |
| 2745 | } |
| 2746 | |
| 2747 | /* |
| 2748 | * If we've hit a total OOM refilling the Rx ring we poll once a second |
| 2749 | * for some memory. Otherwise there is no way to restart the rx process. |
| 2750 | */ |
| 2751 | static void |
| 2752 | rx_oom_timer(unsigned long arg) |
| 2753 | { |
| 2754 | struct net_device *dev = (struct net_device *)arg; |
| 2755 | struct vortex_private *vp = netdev_priv(dev); |
| 2756 | |
| 2757 | spin_lock_irq(&vp->lock); |
| 2758 | if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */ |
| 2759 | boomerang_rx(dev); |
| 2760 | if (vortex_debug > 1) { |
| 2761 | printk(KERN_DEBUG "%s: rx_oom_timer %s\n", dev->name, |
| 2762 | ((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying"); |
| 2763 | } |
| 2764 | spin_unlock_irq(&vp->lock); |
| 2765 | } |
| 2766 | |
| 2767 | static void |
| 2768 | vortex_down(struct net_device *dev, int final_down) |
| 2769 | { |
| 2770 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2771 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2772 | |
| 2773 | netif_stop_queue (dev); |
| 2774 | |
| 2775 | del_timer_sync(&vp->rx_oom_timer); |
| 2776 | del_timer_sync(&vp->timer); |
| 2777 | |
| 2778 | /* Turn off statistics ASAP. We update vp->stats below. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2779 | iowrite16(StatsDisable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2780 | |
| 2781 | /* Disable the receiver and transmitter. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2782 | iowrite16(RxDisable, ioaddr + EL3_CMD); |
| 2783 | iowrite16(TxDisable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2784 | |
| 2785 | /* Disable receiving 802.1q tagged frames */ |
| 2786 | set_8021q_mode(dev, 0); |
| 2787 | |
| 2788 | if (dev->if_port == XCVR_10base2) |
| 2789 | /* Turn off thinnet power. Green! */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2790 | iowrite16(StopCoax, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2791 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2792 | iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2793 | |
| 2794 | update_stats(ioaddr, dev); |
| 2795 | if (vp->full_bus_master_rx) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2796 | iowrite32(0, ioaddr + UpListPtr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2797 | if (vp->full_bus_master_tx) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2798 | iowrite32(0, ioaddr + DownListPtr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2799 | |
| 2800 | if (final_down && VORTEX_PCI(vp)) { |
Daniel Ritz | 3c8fad1 | 2005-05-05 16:15:44 -0700 | [diff] [blame] | 2801 | vp->pm_state_valid = 1; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2802 | pci_save_state(VORTEX_PCI(vp)); |
| 2803 | acpi_set_WOL(dev); |
| 2804 | } |
| 2805 | } |
| 2806 | |
| 2807 | static int |
| 2808 | vortex_close(struct net_device *dev) |
| 2809 | { |
| 2810 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2811 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2812 | int i; |
| 2813 | |
| 2814 | if (netif_device_present(dev)) |
| 2815 | vortex_down(dev, 1); |
| 2816 | |
| 2817 | if (vortex_debug > 1) { |
| 2818 | printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2819 | dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2820 | printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d" |
| 2821 | " tx_queued %d Rx pre-checksummed %d.\n", |
| 2822 | dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits); |
| 2823 | } |
| 2824 | |
| 2825 | #if DO_ZEROCOPY |
John W. Linville | 32fb5f0 | 2005-11-07 00:58:05 -0800 | [diff] [blame] | 2826 | if (vp->rx_csumhits && |
| 2827 | (vp->drv_flags & HAS_HWCKSM) == 0 && |
| 2828 | (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) { |
| 2829 | printk(KERN_WARNING "%s supports hardware checksums, and we're " |
| 2830 | "not using them!\n", dev->name); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2831 | } |
| 2832 | #endif |
| 2833 | |
| 2834 | free_irq(dev->irq, dev); |
| 2835 | |
| 2836 | if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ |
| 2837 | for (i = 0; i < RX_RING_SIZE; i++) |
| 2838 | if (vp->rx_skbuff[i]) { |
| 2839 | pci_unmap_single( VORTEX_PCI(vp), le32_to_cpu(vp->rx_ring[i].addr), |
| 2840 | PKT_BUF_SZ, PCI_DMA_FROMDEVICE); |
| 2841 | dev_kfree_skb(vp->rx_skbuff[i]); |
| 2842 | vp->rx_skbuff[i] = NULL; |
| 2843 | } |
| 2844 | } |
| 2845 | if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ |
| 2846 | for (i = 0; i < TX_RING_SIZE; i++) { |
| 2847 | if (vp->tx_skbuff[i]) { |
| 2848 | struct sk_buff *skb = vp->tx_skbuff[i]; |
| 2849 | #if DO_ZEROCOPY |
| 2850 | int k; |
| 2851 | |
| 2852 | for (k=0; k<=skb_shinfo(skb)->nr_frags; k++) |
| 2853 | pci_unmap_single(VORTEX_PCI(vp), |
| 2854 | le32_to_cpu(vp->tx_ring[i].frag[k].addr), |
| 2855 | le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF, |
| 2856 | PCI_DMA_TODEVICE); |
| 2857 | #else |
| 2858 | pci_unmap_single(VORTEX_PCI(vp), le32_to_cpu(vp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE); |
| 2859 | #endif |
| 2860 | dev_kfree_skb(skb); |
| 2861 | vp->tx_skbuff[i] = NULL; |
| 2862 | } |
| 2863 | } |
| 2864 | } |
| 2865 | |
| 2866 | return 0; |
| 2867 | } |
| 2868 | |
| 2869 | static void |
| 2870 | dump_tx_ring(struct net_device *dev) |
| 2871 | { |
| 2872 | if (vortex_debug > 0) { |
| 2873 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2874 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2875 | |
| 2876 | if (vp->full_bus_master_tx) { |
| 2877 | int i; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2878 | int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2879 | |
| 2880 | printk(KERN_ERR " Flags; bus-master %d, dirty %d(%d) current %d(%d)\n", |
| 2881 | vp->full_bus_master_tx, |
| 2882 | vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE, |
| 2883 | vp->cur_tx, vp->cur_tx % TX_RING_SIZE); |
| 2884 | printk(KERN_ERR " Transmit list %8.8x vs. %p.\n", |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2885 | ioread32(ioaddr + DownListPtr), |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2886 | &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]); |
| 2887 | issue_and_wait(dev, DownStall); |
| 2888 | for (i = 0; i < TX_RING_SIZE; i++) { |
| 2889 | printk(KERN_ERR " %d: @%p length %8.8x status %8.8x\n", i, |
| 2890 | &vp->tx_ring[i], |
| 2891 | #if DO_ZEROCOPY |
| 2892 | le32_to_cpu(vp->tx_ring[i].frag[0].length), |
| 2893 | #else |
| 2894 | le32_to_cpu(vp->tx_ring[i].length), |
| 2895 | #endif |
| 2896 | le32_to_cpu(vp->tx_ring[i].status)); |
| 2897 | } |
| 2898 | if (!stalled) |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2899 | iowrite16(DownUnstall, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2900 | } |
| 2901 | } |
| 2902 | } |
| 2903 | |
| 2904 | static struct net_device_stats *vortex_get_stats(struct net_device *dev) |
| 2905 | { |
| 2906 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2907 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2908 | unsigned long flags; |
| 2909 | |
| 2910 | if (netif_device_present(dev)) { /* AKPM: Used to be netif_running */ |
| 2911 | spin_lock_irqsave (&vp->lock, flags); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2912 | update_stats(ioaddr, dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2913 | spin_unlock_irqrestore (&vp->lock, flags); |
| 2914 | } |
| 2915 | return &vp->stats; |
| 2916 | } |
| 2917 | |
| 2918 | /* Update statistics. |
| 2919 | Unlike with the EL3 we need not worry about interrupts changing |
| 2920 | the window setting from underneath us, but we must still guard |
| 2921 | against a race condition with a StatsUpdate interrupt updating the |
| 2922 | table. This is done by checking that the ASM (!) code generated uses |
| 2923 | atomic updates with '+='. |
| 2924 | */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2925 | static void update_stats(void __iomem *ioaddr, struct net_device *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2926 | { |
| 2927 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2928 | int old_window = ioread16(ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2929 | |
| 2930 | if (old_window == 0xffff) /* Chip suspended or ejected. */ |
| 2931 | return; |
| 2932 | /* Unlike the 3c5x9 we need not turn off stats updates while reading. */ |
| 2933 | /* Switch to the stats window, and read everything. */ |
| 2934 | EL3WINDOW(6); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2935 | vp->stats.tx_carrier_errors += ioread8(ioaddr + 0); |
| 2936 | vp->stats.tx_heartbeat_errors += ioread8(ioaddr + 1); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2937 | vp->stats.tx_window_errors += ioread8(ioaddr + 4); |
| 2938 | vp->stats.rx_fifo_errors += ioread8(ioaddr + 5); |
| 2939 | vp->stats.tx_packets += ioread8(ioaddr + 6); |
| 2940 | vp->stats.tx_packets += (ioread8(ioaddr + 9)&0x30) << 4; |
| 2941 | /* Rx packets */ ioread8(ioaddr + 7); /* Must read to clear */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2942 | /* Don't bother with register 9, an extension of registers 6&7. |
| 2943 | If we do use the 6&7 values the atomic update assumption above |
| 2944 | is invalid. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2945 | vp->stats.rx_bytes += ioread16(ioaddr + 10); |
| 2946 | vp->stats.tx_bytes += ioread16(ioaddr + 12); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2947 | /* Extra stats for get_ethtool_stats() */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2948 | vp->xstats.tx_multiple_collisions += ioread8(ioaddr + 2); |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 2949 | vp->xstats.tx_single_collisions += ioread8(ioaddr + 3); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2950 | vp->xstats.tx_deferred += ioread8(ioaddr + 8); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2951 | EL3WINDOW(4); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2952 | vp->xstats.rx_bad_ssd += ioread8(ioaddr + 12); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2953 | |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 2954 | vp->stats.collisions = vp->xstats.tx_multiple_collisions |
| 2955 | + vp->xstats.tx_single_collisions |
| 2956 | + vp->xstats.tx_max_collisions; |
| 2957 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2958 | { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2959 | u8 up = ioread8(ioaddr + 13); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2960 | vp->stats.rx_bytes += (up & 0x0f) << 16; |
| 2961 | vp->stats.tx_bytes += (up & 0xf0) << 12; |
| 2962 | } |
| 2963 | |
| 2964 | EL3WINDOW(old_window >> 13); |
| 2965 | return; |
| 2966 | } |
| 2967 | |
| 2968 | static int vortex_nway_reset(struct net_device *dev) |
| 2969 | { |
| 2970 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2971 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2972 | unsigned long flags; |
| 2973 | int rc; |
| 2974 | |
| 2975 | spin_lock_irqsave(&vp->lock, flags); |
| 2976 | EL3WINDOW(4); |
| 2977 | rc = mii_nway_restart(&vp->mii); |
| 2978 | spin_unlock_irqrestore(&vp->lock, flags); |
| 2979 | return rc; |
| 2980 | } |
| 2981 | |
| 2982 | static u32 vortex_get_link(struct net_device *dev) |
| 2983 | { |
| 2984 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2985 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2986 | unsigned long flags; |
| 2987 | int rc; |
| 2988 | |
| 2989 | spin_lock_irqsave(&vp->lock, flags); |
| 2990 | EL3WINDOW(4); |
| 2991 | rc = mii_link_ok(&vp->mii); |
| 2992 | spin_unlock_irqrestore(&vp->lock, flags); |
| 2993 | return rc; |
| 2994 | } |
| 2995 | |
| 2996 | static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| 2997 | { |
| 2998 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 2999 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3000 | unsigned long flags; |
| 3001 | int rc; |
| 3002 | |
| 3003 | spin_lock_irqsave(&vp->lock, flags); |
| 3004 | EL3WINDOW(4); |
| 3005 | rc = mii_ethtool_gset(&vp->mii, cmd); |
| 3006 | spin_unlock_irqrestore(&vp->lock, flags); |
| 3007 | return rc; |
| 3008 | } |
| 3009 | |
| 3010 | static int vortex_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| 3011 | { |
| 3012 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3013 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3014 | unsigned long flags; |
| 3015 | int rc; |
| 3016 | |
| 3017 | spin_lock_irqsave(&vp->lock, flags); |
| 3018 | EL3WINDOW(4); |
| 3019 | rc = mii_ethtool_sset(&vp->mii, cmd); |
| 3020 | spin_unlock_irqrestore(&vp->lock, flags); |
| 3021 | return rc; |
| 3022 | } |
| 3023 | |
| 3024 | static u32 vortex_get_msglevel(struct net_device *dev) |
| 3025 | { |
| 3026 | return vortex_debug; |
| 3027 | } |
| 3028 | |
| 3029 | static void vortex_set_msglevel(struct net_device *dev, u32 dbg) |
| 3030 | { |
| 3031 | vortex_debug = dbg; |
| 3032 | } |
| 3033 | |
| 3034 | static int vortex_get_stats_count(struct net_device *dev) |
| 3035 | { |
| 3036 | return VORTEX_NUM_STATS; |
| 3037 | } |
| 3038 | |
| 3039 | static void vortex_get_ethtool_stats(struct net_device *dev, |
| 3040 | struct ethtool_stats *stats, u64 *data) |
| 3041 | { |
| 3042 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3043 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3044 | unsigned long flags; |
| 3045 | |
| 3046 | spin_lock_irqsave(&vp->lock, flags); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3047 | update_stats(ioaddr, dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3048 | spin_unlock_irqrestore(&vp->lock, flags); |
| 3049 | |
| 3050 | data[0] = vp->xstats.tx_deferred; |
Steffen Klassert | 8d1d034 | 2006-02-03 03:03:57 -0800 | [diff] [blame] | 3051 | data[1] = vp->xstats.tx_max_collisions; |
| 3052 | data[2] = vp->xstats.tx_multiple_collisions; |
| 3053 | data[3] = vp->xstats.tx_single_collisions; |
| 3054 | data[4] = vp->xstats.rx_bad_ssd; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3055 | } |
| 3056 | |
| 3057 | |
| 3058 | static void vortex_get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| 3059 | { |
| 3060 | switch (stringset) { |
| 3061 | case ETH_SS_STATS: |
| 3062 | memcpy(data, ðtool_stats_keys, sizeof(ethtool_stats_keys)); |
| 3063 | break; |
| 3064 | default: |
| 3065 | WARN_ON(1); |
| 3066 | break; |
| 3067 | } |
| 3068 | } |
| 3069 | |
| 3070 | static void vortex_get_drvinfo(struct net_device *dev, |
| 3071 | struct ethtool_drvinfo *info) |
| 3072 | { |
| 3073 | struct vortex_private *vp = netdev_priv(dev); |
| 3074 | |
| 3075 | strcpy(info->driver, DRV_NAME); |
| 3076 | strcpy(info->version, DRV_VERSION); |
| 3077 | if (VORTEX_PCI(vp)) { |
| 3078 | strcpy(info->bus_info, pci_name(VORTEX_PCI(vp))); |
| 3079 | } else { |
| 3080 | if (VORTEX_EISA(vp)) |
| 3081 | sprintf(info->bus_info, vp->gendev->bus_id); |
| 3082 | else |
| 3083 | sprintf(info->bus_info, "EISA 0x%lx %d", |
| 3084 | dev->base_addr, dev->irq); |
| 3085 | } |
| 3086 | } |
| 3087 | |
| 3088 | static struct ethtool_ops vortex_ethtool_ops = { |
| 3089 | .get_drvinfo = vortex_get_drvinfo, |
| 3090 | .get_strings = vortex_get_strings, |
| 3091 | .get_msglevel = vortex_get_msglevel, |
| 3092 | .set_msglevel = vortex_set_msglevel, |
| 3093 | .get_ethtool_stats = vortex_get_ethtool_stats, |
| 3094 | .get_stats_count = vortex_get_stats_count, |
| 3095 | .get_settings = vortex_get_settings, |
| 3096 | .set_settings = vortex_set_settings, |
| 3097 | .get_link = vortex_get_link, |
| 3098 | .nway_reset = vortex_nway_reset, |
John W. Linville | bb531fc | 2005-11-07 00:58:07 -0800 | [diff] [blame] | 3099 | .get_perm_addr = ethtool_op_get_perm_addr, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3100 | }; |
| 3101 | |
| 3102 | #ifdef CONFIG_PCI |
| 3103 | /* |
| 3104 | * Must power the device up to do MDIO operations |
| 3105 | */ |
| 3106 | static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| 3107 | { |
| 3108 | int err; |
| 3109 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3110 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3111 | unsigned long flags; |
| 3112 | int state = 0; |
| 3113 | |
| 3114 | if(VORTEX_PCI(vp)) |
| 3115 | state = VORTEX_PCI(vp)->current_state; |
| 3116 | |
| 3117 | /* The kernel core really should have pci_get_power_state() */ |
| 3118 | |
| 3119 | if(state != 0) |
| 3120 | pci_set_power_state(VORTEX_PCI(vp), PCI_D0); |
| 3121 | spin_lock_irqsave(&vp->lock, flags); |
| 3122 | EL3WINDOW(4); |
| 3123 | err = generic_mii_ioctl(&vp->mii, if_mii(rq), cmd, NULL); |
| 3124 | spin_unlock_irqrestore(&vp->lock, flags); |
| 3125 | if(state != 0) |
| 3126 | pci_set_power_state(VORTEX_PCI(vp), state); |
| 3127 | |
| 3128 | return err; |
| 3129 | } |
| 3130 | #endif |
| 3131 | |
| 3132 | |
| 3133 | /* Pre-Cyclone chips have no documented multicast filter, so the only |
| 3134 | multicast setting is to receive all multicast frames. At least |
| 3135 | the chip has a very clean way to set the mode, unlike many others. */ |
| 3136 | static void set_rx_mode(struct net_device *dev) |
| 3137 | { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3138 | struct vortex_private *vp = netdev_priv(dev); |
| 3139 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3140 | int new_mode; |
| 3141 | |
| 3142 | if (dev->flags & IFF_PROMISC) { |
| 3143 | if (vortex_debug > 0) |
| 3144 | printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name); |
| 3145 | new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm; |
| 3146 | } else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) { |
| 3147 | new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast; |
| 3148 | } else |
| 3149 | new_mode = SetRxFilter | RxStation | RxBroadcast; |
| 3150 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3151 | iowrite16(new_mode, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3152 | } |
| 3153 | |
| 3154 | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) |
| 3155 | /* Setup the card so that it can receive frames with an 802.1q VLAN tag. |
| 3156 | Note that this must be done after each RxReset due to some backwards |
| 3157 | compatibility logic in the Cyclone and Tornado ASICs */ |
| 3158 | |
| 3159 | /* The Ethernet Type used for 802.1q tagged frames */ |
| 3160 | #define VLAN_ETHER_TYPE 0x8100 |
| 3161 | |
| 3162 | static void set_8021q_mode(struct net_device *dev, int enable) |
| 3163 | { |
| 3164 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3165 | void __iomem *ioaddr = vp->ioaddr; |
| 3166 | int old_window = ioread16(ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3167 | int mac_ctrl; |
| 3168 | |
| 3169 | if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) { |
| 3170 | /* cyclone and tornado chipsets can recognize 802.1q |
| 3171 | * tagged frames and treat them correctly */ |
| 3172 | |
| 3173 | int max_pkt_size = dev->mtu+14; /* MTU+Ethernet header */ |
| 3174 | if (enable) |
| 3175 | max_pkt_size += 4; /* 802.1Q VLAN tag */ |
| 3176 | |
| 3177 | EL3WINDOW(3); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3178 | iowrite16(max_pkt_size, ioaddr+Wn3_MaxPktSize); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3179 | |
| 3180 | /* set VlanEtherType to let the hardware checksumming |
| 3181 | treat tagged frames correctly */ |
| 3182 | EL3WINDOW(7); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3183 | iowrite16(VLAN_ETHER_TYPE, ioaddr+Wn7_VlanEtherType); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3184 | } else { |
| 3185 | /* on older cards we have to enable large frames */ |
| 3186 | |
| 3187 | vp->large_frames = dev->mtu > 1500 || enable; |
| 3188 | |
| 3189 | EL3WINDOW(3); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3190 | mac_ctrl = ioread16(ioaddr+Wn3_MAC_Ctrl); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3191 | if (vp->large_frames) |
| 3192 | mac_ctrl |= 0x40; |
| 3193 | else |
| 3194 | mac_ctrl &= ~0x40; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3195 | iowrite16(mac_ctrl, ioaddr+Wn3_MAC_Ctrl); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3196 | } |
| 3197 | |
| 3198 | EL3WINDOW(old_window); |
| 3199 | } |
| 3200 | #else |
| 3201 | |
| 3202 | static void set_8021q_mode(struct net_device *dev, int enable) |
| 3203 | { |
| 3204 | } |
| 3205 | |
| 3206 | |
| 3207 | #endif |
| 3208 | |
| 3209 | /* MII transceiver control section. |
| 3210 | Read and write the MII registers using software-generated serial |
| 3211 | MDIO protocol. See the MII specifications or DP83840A data sheet |
| 3212 | for details. */ |
| 3213 | |
| 3214 | /* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually |
| 3215 | met by back-to-back PCI I/O cycles, but we insert a delay to avoid |
| 3216 | "overclocking" issues. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3217 | #define mdio_delay() ioread32(mdio_addr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3218 | |
| 3219 | #define MDIO_SHIFT_CLK 0x01 |
| 3220 | #define MDIO_DIR_WRITE 0x04 |
| 3221 | #define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE) |
| 3222 | #define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE) |
| 3223 | #define MDIO_DATA_READ 0x02 |
| 3224 | #define MDIO_ENB_IN 0x00 |
| 3225 | |
| 3226 | /* Generate the preamble required for initial synchronization and |
| 3227 | a few older transceivers. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3228 | static void mdio_sync(void __iomem *ioaddr, int bits) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3229 | { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3230 | void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3231 | |
| 3232 | /* Establish sync by sending at least 32 logic ones. */ |
| 3233 | while (-- bits >= 0) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3234 | iowrite16(MDIO_DATA_WRITE1, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3235 | mdio_delay(); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3236 | iowrite16(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3237 | mdio_delay(); |
| 3238 | } |
| 3239 | } |
| 3240 | |
| 3241 | static int mdio_read(struct net_device *dev, int phy_id, int location) |
| 3242 | { |
| 3243 | int i; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3244 | struct vortex_private *vp = netdev_priv(dev); |
| 3245 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3246 | int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; |
| 3247 | unsigned int retval = 0; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3248 | void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3249 | |
| 3250 | if (mii_preamble_required) |
| 3251 | mdio_sync(ioaddr, 32); |
| 3252 | |
| 3253 | /* Shift the read command bits out. */ |
| 3254 | for (i = 14; i >= 0; i--) { |
| 3255 | int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3256 | iowrite16(dataval, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3257 | mdio_delay(); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3258 | iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3259 | mdio_delay(); |
| 3260 | } |
| 3261 | /* Read the two transition, 16 data, and wire-idle bits. */ |
| 3262 | for (i = 19; i > 0; i--) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3263 | iowrite16(MDIO_ENB_IN, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3264 | mdio_delay(); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3265 | retval = (retval << 1) | ((ioread16(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); |
| 3266 | iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3267 | mdio_delay(); |
| 3268 | } |
| 3269 | return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff; |
| 3270 | } |
| 3271 | |
| 3272 | static void mdio_write(struct net_device *dev, int phy_id, int location, int value) |
| 3273 | { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3274 | struct vortex_private *vp = netdev_priv(dev); |
| 3275 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3276 | int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3277 | void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3278 | int i; |
| 3279 | |
| 3280 | if (mii_preamble_required) |
| 3281 | mdio_sync(ioaddr, 32); |
| 3282 | |
| 3283 | /* Shift the command bits out. */ |
| 3284 | for (i = 31; i >= 0; i--) { |
| 3285 | int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3286 | iowrite16(dataval, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3287 | mdio_delay(); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3288 | iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3289 | mdio_delay(); |
| 3290 | } |
| 3291 | /* Leave the interface idle. */ |
| 3292 | for (i = 1; i >= 0; i--) { |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3293 | iowrite16(MDIO_ENB_IN, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3294 | mdio_delay(); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3295 | iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3296 | mdio_delay(); |
| 3297 | } |
| 3298 | return; |
| 3299 | } |
| 3300 | |
| 3301 | /* ACPI: Advanced Configuration and Power Interface. */ |
| 3302 | /* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */ |
| 3303 | static void acpi_set_WOL(struct net_device *dev) |
| 3304 | { |
| 3305 | struct vortex_private *vp = netdev_priv(dev); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3306 | void __iomem *ioaddr = vp->ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3307 | |
| 3308 | if (vp->enable_wol) { |
| 3309 | /* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */ |
| 3310 | EL3WINDOW(7); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3311 | iowrite16(2, ioaddr + 0x0c); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3312 | /* The RxFilter must accept the WOL frames. */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3313 | iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); |
| 3314 | iowrite16(RxEnable, ioaddr + EL3_CMD); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3315 | |
| 3316 | pci_enable_wake(VORTEX_PCI(vp), 0, 1); |
Daniel Ritz | 3c8fad1 | 2005-05-05 16:15:44 -0700 | [diff] [blame] | 3317 | |
| 3318 | /* Change the power state to D3; RxEnable doesn't take effect. */ |
| 3319 | pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3320 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3321 | } |
| 3322 | |
| 3323 | |
| 3324 | static void __devexit vortex_remove_one (struct pci_dev *pdev) |
| 3325 | { |
| 3326 | struct net_device *dev = pci_get_drvdata(pdev); |
| 3327 | struct vortex_private *vp; |
| 3328 | |
| 3329 | if (!dev) { |
| 3330 | printk("vortex_remove_one called for Compaq device!\n"); |
| 3331 | BUG(); |
| 3332 | } |
| 3333 | |
| 3334 | vp = netdev_priv(dev); |
| 3335 | |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3336 | if (vp->cb_fn_base) |
| 3337 | pci_iounmap(VORTEX_PCI(vp), vp->cb_fn_base); |
| 3338 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3339 | unregister_netdev(dev); |
| 3340 | |
| 3341 | if (VORTEX_PCI(vp)) { |
| 3342 | pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ |
| 3343 | if (vp->pm_state_valid) |
| 3344 | pci_restore_state(VORTEX_PCI(vp)); |
| 3345 | pci_disable_device(VORTEX_PCI(vp)); |
| 3346 | } |
| 3347 | /* Should really use issue_and_wait() here */ |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3348 | iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14), |
| 3349 | vp->ioaddr + EL3_CMD); |
| 3350 | |
| 3351 | pci_iounmap(VORTEX_PCI(vp), vp->ioaddr); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3352 | |
| 3353 | pci_free_consistent(pdev, |
| 3354 | sizeof(struct boom_rx_desc) * RX_RING_SIZE |
| 3355 | + sizeof(struct boom_tx_desc) * TX_RING_SIZE, |
| 3356 | vp->rx_ring, |
| 3357 | vp->rx_ring_dma); |
| 3358 | if (vp->must_free_region) |
| 3359 | release_region(dev->base_addr, vp->io_size); |
| 3360 | free_netdev(dev); |
| 3361 | } |
| 3362 | |
| 3363 | |
| 3364 | static struct pci_driver vortex_driver = { |
| 3365 | .name = "3c59x", |
| 3366 | .probe = vortex_init_one, |
| 3367 | .remove = __devexit_p(vortex_remove_one), |
| 3368 | .id_table = vortex_pci_tbl, |
| 3369 | #ifdef CONFIG_PM |
| 3370 | .suspend = vortex_suspend, |
| 3371 | .resume = vortex_resume, |
| 3372 | #endif |
| 3373 | }; |
| 3374 | |
| 3375 | |
| 3376 | static int vortex_have_pci; |
| 3377 | static int vortex_have_eisa; |
| 3378 | |
| 3379 | |
| 3380 | static int __init vortex_init (void) |
| 3381 | { |
| 3382 | int pci_rc, eisa_rc; |
| 3383 | |
| 3384 | pci_rc = pci_module_init(&vortex_driver); |
| 3385 | eisa_rc = vortex_eisa_init(); |
| 3386 | |
| 3387 | if (pci_rc == 0) |
| 3388 | vortex_have_pci = 1; |
| 3389 | if (eisa_rc > 0) |
| 3390 | vortex_have_eisa = 1; |
| 3391 | |
| 3392 | return (vortex_have_pci + vortex_have_eisa) ? 0 : -ENODEV; |
| 3393 | } |
| 3394 | |
| 3395 | |
| 3396 | static void __exit vortex_eisa_cleanup (void) |
| 3397 | { |
| 3398 | struct vortex_private *vp; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3399 | void __iomem *ioaddr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3400 | |
| 3401 | #ifdef CONFIG_EISA |
| 3402 | /* Take care of the EISA devices */ |
| 3403 | eisa_driver_unregister (&vortex_eisa_driver); |
| 3404 | #endif |
| 3405 | |
| 3406 | if (compaq_net_device) { |
| 3407 | vp = compaq_net_device->priv; |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3408 | ioaddr = ioport_map(compaq_net_device->base_addr, |
| 3409 | VORTEX_TOTAL_SIZE); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3410 | |
| 3411 | unregister_netdev (compaq_net_device); |
John W. Linville | 62afe59 | 2005-11-07 00:58:02 -0800 | [diff] [blame] | 3412 | iowrite16 (TotalReset, ioaddr + EL3_CMD); |
| 3413 | release_region(compaq_net_device->base_addr, |
| 3414 | VORTEX_TOTAL_SIZE); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3415 | |
| 3416 | free_netdev (compaq_net_device); |
| 3417 | } |
| 3418 | } |
| 3419 | |
| 3420 | |
| 3421 | static void __exit vortex_cleanup (void) |
| 3422 | { |
| 3423 | if (vortex_have_pci) |
| 3424 | pci_unregister_driver (&vortex_driver); |
| 3425 | if (vortex_have_eisa) |
| 3426 | vortex_eisa_cleanup (); |
| 3427 | } |
| 3428 | |
| 3429 | |
| 3430 | module_init(vortex_init); |
| 3431 | module_exit(vortex_cleanup); |
| 3432 | |
| 3433 | |
| 3434 | /* |
| 3435 | * Local variables: |
| 3436 | * c-indent-level: 4 |
| 3437 | * c-basic-offset: 4 |
| 3438 | * tab-width: 4 |
| 3439 | * End: |
| 3440 | */ |