blob: 8c2b7fbe23924fcdf45cf02976112e95274c91fd [file] [log] [blame]
Dan Murphy7a8685a2014-11-19 04:48:35 -08001/*
2 * TI LP8860 4-Channel LED Driver
3 *
4 * Copyright (C) 2014 Texas Instruments
5 *
6 * Author: Dan Murphy <dmurphy@ti.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 */
13
14#include <linux/i2c.h>
15#include <linux/init.h>
16#include <linux/leds.h>
17#include <linux/regmap.h>
18#include <linux/regulator/consumer.h>
19#include <linux/module.h>
20#include <linux/mutex.h>
21#include <linux/of.h>
22#include <linux/of_gpio.h>
23#include <linux/gpio/consumer.h>
24#include <linux/slab.h>
25
26#define LP8860_DISP_CL1_BRT_MSB 0x00
27#define LP8860_DISP_CL1_BRT_LSB 0x01
28#define LP8860_DISP_CL1_CURR_MSB 0x02
29#define LP8860_DISP_CL1_CURR_LSB 0x03
30#define LP8860_CL2_BRT_MSB 0x04
31#define LP8860_CL2_BRT_LSB 0x05
32#define LP8860_CL2_CURRENT 0x06
33#define LP8860_CL3_BRT_MSB 0x07
34#define LP8860_CL3_BRT_LSB 0x08
35#define LP8860_CL3_CURRENT 0x09
36#define LP8860_CL4_BRT_MSB 0x0a
37#define LP8860_CL4_BRT_LSB 0x0b
38#define LP8860_CL4_CURRENT 0x0c
39#define LP8860_CONFIG 0x0d
40#define LP8860_STATUS 0x0e
41#define LP8860_FAULT 0x0f
42#define LP8860_LED_FAULT 0x10
43#define LP8860_FAULT_CLEAR 0x11
44#define LP8860_ID 0x12
45#define LP8860_TEMP_MSB 0x13
46#define LP8860_TEMP_LSB 0x14
47#define LP8860_DISP_LED_CURR_MSB 0x15
48#define LP8860_DISP_LED_CURR_LSB 0x16
49#define LP8860_DISP_LED_PWM_MSB 0x17
50#define LP8860_DISP_LED_PWM_LSB 0x18
51#define LP8860_EEPROM_CNTRL 0x19
52#define LP8860_EEPROM_UNLOCK 0x1a
53
54#define LP8860_EEPROM_REG_0 0x60
55#define LP8860_EEPROM_REG_1 0x61
56#define LP8860_EEPROM_REG_2 0x62
57#define LP8860_EEPROM_REG_3 0x63
58#define LP8860_EEPROM_REG_4 0x64
59#define LP8860_EEPROM_REG_5 0x65
60#define LP8860_EEPROM_REG_6 0x66
61#define LP8860_EEPROM_REG_7 0x67
62#define LP8860_EEPROM_REG_8 0x68
63#define LP8860_EEPROM_REG_9 0x69
64#define LP8860_EEPROM_REG_10 0x6a
65#define LP8860_EEPROM_REG_11 0x6b
66#define LP8860_EEPROM_REG_12 0x6c
67#define LP8860_EEPROM_REG_13 0x6d
68#define LP8860_EEPROM_REG_14 0x6e
69#define LP8860_EEPROM_REG_15 0x6f
70#define LP8860_EEPROM_REG_16 0x70
71#define LP8860_EEPROM_REG_17 0x71
72#define LP8860_EEPROM_REG_18 0x72
73#define LP8860_EEPROM_REG_19 0x73
74#define LP8860_EEPROM_REG_20 0x74
75#define LP8860_EEPROM_REG_21 0x75
76#define LP8860_EEPROM_REG_22 0x76
77#define LP8860_EEPROM_REG_23 0x77
78#define LP8860_EEPROM_REG_24 0x78
79
80#define LP8860_LOCK_EEPROM 0x00
81#define LP8860_UNLOCK_EEPROM 0x01
82#define LP8860_PROGRAM_EEPROM 0x02
83#define LP8860_EEPROM_CODE_1 0x08
84#define LP8860_EEPROM_CODE_2 0xba
85#define LP8860_EEPROM_CODE_3 0xef
86
87#define LP8860_CLEAR_FAULTS 0x01
88
89#define LP8860_DISP_LED_NAME "display_cluster"
90
91/**
92 * struct lp8860_led -
93 * @lock - Lock for reading/writing the device
94 * @work - Work item used to off load the brightness register writes
95 * @client - Pointer to the I2C client
96 * @led_dev - led class device pointer
97 * @regmap - Devices register map
98 * @eeprom_regmap - EEPROM register map
99 * @enable_gpio - VDDIO/EN gpio to enable communication interface
100 * @regulator - LED supply regulator pointer
101 * @brightness - Current brightness value requested
102 * @label - LED label
103**/
104struct lp8860_led {
105 struct mutex lock;
106 struct work_struct work;
107 struct i2c_client *client;
108 struct led_classdev led_dev;
109 struct regmap *regmap;
110 struct regmap *eeprom_regmap;
111 struct gpio_desc *enable_gpio;
112 struct regulator *regulator;
113 enum led_brightness brightness;
114 const char *label;
115};
116
117struct lp8860_eeprom_reg {
118 uint8_t reg;
119 uint8_t value;
120};
121
122static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
123 { LP8860_EEPROM_REG_0, 0xed },
124 { LP8860_EEPROM_REG_1, 0xdf },
125 { LP8860_EEPROM_REG_2, 0xdc },
126 { LP8860_EEPROM_REG_3, 0xf0 },
127 { LP8860_EEPROM_REG_4, 0xdf },
128 { LP8860_EEPROM_REG_5, 0xe5 },
129 { LP8860_EEPROM_REG_6, 0xf2 },
130 { LP8860_EEPROM_REG_7, 0x77 },
131 { LP8860_EEPROM_REG_8, 0x77 },
132 { LP8860_EEPROM_REG_9, 0x71 },
133 { LP8860_EEPROM_REG_10, 0x3f },
134 { LP8860_EEPROM_REG_11, 0xb7 },
135 { LP8860_EEPROM_REG_12, 0x17 },
136 { LP8860_EEPROM_REG_13, 0xef },
137 { LP8860_EEPROM_REG_14, 0xb0 },
138 { LP8860_EEPROM_REG_15, 0x87 },
139 { LP8860_EEPROM_REG_16, 0xce },
140 { LP8860_EEPROM_REG_17, 0x72 },
141 { LP8860_EEPROM_REG_18, 0xe5 },
142 { LP8860_EEPROM_REG_19, 0xdf },
143 { LP8860_EEPROM_REG_20, 0x35 },
144 { LP8860_EEPROM_REG_21, 0x06 },
145 { LP8860_EEPROM_REG_22, 0xdc },
146 { LP8860_EEPROM_REG_23, 0x88 },
147 { LP8860_EEPROM_REG_24, 0x3E },
148};
149
150static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
151{
152 int ret;
153
154 mutex_lock(&led->lock);
155
156 if (lock == LP8860_UNLOCK_EEPROM) {
157 ret = regmap_write(led->regmap,
158 LP8860_EEPROM_UNLOCK,
159 LP8860_EEPROM_CODE_1);
160 if (ret) {
161 dev_err(&led->client->dev, "EEPROM Unlock failed\n");
162 goto out;
163 }
164
165 ret = regmap_write(led->regmap,
166 LP8860_EEPROM_UNLOCK,
167 LP8860_EEPROM_CODE_2);
168 if (ret) {
169 dev_err(&led->client->dev, "EEPROM Unlock failed\n");
170 goto out;
171 }
172 ret = regmap_write(led->regmap,
173 LP8860_EEPROM_UNLOCK,
174 LP8860_EEPROM_CODE_3);
175 if (ret) {
176 dev_err(&led->client->dev, "EEPROM Unlock failed\n");
177 goto out;
178 }
179 } else {
180 ret = regmap_write(led->regmap,
181 LP8860_EEPROM_UNLOCK,
182 LP8860_LOCK_EEPROM);
183 }
184
185out:
186 mutex_unlock(&led->lock);
187 return ret;
188}
189
190static int lp8860_fault_check(struct lp8860_led *led)
191{
192 int ret, fault;
193 unsigned int read_buf;
194
195 ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
196 if (ret)
197 goto out;
198
199 fault = read_buf;
200
201 ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
202 if (ret)
203 goto out;
204
205 fault |= read_buf;
206
207 /* Attempt to clear any faults */
208 if (fault)
209 ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
210 LP8860_CLEAR_FAULTS);
211out:
212 return ret;
213}
214
215static void lp8860_led_brightness_work(struct work_struct *work)
216{
217 struct lp8860_led *led = container_of(work, struct lp8860_led, work);
218 int ret;
219 int disp_brightness = led->brightness * 255;
220
221 mutex_lock(&led->lock);
222
223 ret = lp8860_fault_check(led);
224 if (ret) {
225 dev_err(&led->client->dev, "Cannot read/clear faults\n");
226 goto out;
227 }
228
229 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
230 (disp_brightness & 0xff00) >> 8);
231 if (ret) {
232 dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
233 goto out;
234 }
235
236 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
237 disp_brightness & 0xff);
238 if (ret) {
239 dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
240 goto out;
241 }
242out:
243 mutex_unlock(&led->lock);
244}
245
246static void lp8860_brightness_set(struct led_classdev *led_cdev,
247 enum led_brightness brt_val)
248{
249 struct lp8860_led *led =
250 container_of(led_cdev, struct lp8860_led, led_dev);
251
252 led->brightness = brt_val;
253 schedule_work(&led->work);
254}
255
256static int lp8860_init(struct lp8860_led *led)
257{
258 unsigned int read_buf;
259 int ret, i, reg_count;
260
261 if (led->enable_gpio)
262 gpiod_direction_output(led->enable_gpio, 1);
263
264 ret = lp8860_fault_check(led);
265 if (ret)
266 goto out;
267
268 ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
269 if (ret)
270 goto out;
271
272 ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
273 if (ret) {
274 dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
275 goto out;
276 }
277
278 reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
279 for (i = 0; i < reg_count; i++) {
280 ret = regmap_write(led->eeprom_regmap,
281 lp8860_eeprom_disp_regs[i].reg,
282 lp8860_eeprom_disp_regs[i].value);
283 if (ret) {
284 dev_err(&led->client->dev, "Failed writing EEPROM\n");
285 goto out;
286 }
287 }
288
289 ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
290 if (ret)
291 goto out;
292
293 ret = regmap_write(led->regmap,
294 LP8860_EEPROM_CNTRL,
295 LP8860_PROGRAM_EEPROM);
296 if (ret)
297 dev_err(&led->client->dev, "Failed programming EEPROM\n");
298out:
299 if (ret)
300 if (led->enable_gpio)
301 gpiod_direction_output(led->enable_gpio, 0);
302 return ret;
303}
304
305static struct reg_default lp8860_reg_defs[] = {
306 { LP8860_DISP_CL1_BRT_MSB, 0x00},
307 { LP8860_DISP_CL1_BRT_LSB, 0x00},
308 { LP8860_DISP_CL1_CURR_MSB, 0x00},
309 { LP8860_DISP_CL1_CURR_LSB, 0x00},
310 { LP8860_CL2_BRT_MSB, 0x00},
311 { LP8860_CL2_BRT_LSB, 0x00},
312 { LP8860_CL2_CURRENT, 0x00},
313 { LP8860_CL3_BRT_MSB, 0x00},
314 { LP8860_CL3_BRT_LSB, 0x00},
315 { LP8860_CL3_CURRENT, 0x00},
316 { LP8860_CL4_BRT_MSB, 0x00},
317 { LP8860_CL4_BRT_LSB, 0x00},
318 { LP8860_CL4_CURRENT, 0x00},
319 { LP8860_CONFIG, 0x00},
320 { LP8860_FAULT_CLEAR, 0x00},
321 { LP8860_EEPROM_CNTRL, 0x80},
322 { LP8860_EEPROM_UNLOCK, 0x00},
323};
324
325static const struct regmap_config lp8860_regmap_config = {
326 .reg_bits = 8,
327 .val_bits = 8,
328
329 .max_register = LP8860_EEPROM_UNLOCK,
330 .reg_defaults = lp8860_reg_defs,
331 .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
332 .cache_type = REGCACHE_NONE,
333};
334
335static struct reg_default lp8860_eeprom_defs[] = {
336 { LP8860_EEPROM_REG_0, 0x00 },
337 { LP8860_EEPROM_REG_1, 0x00 },
338 { LP8860_EEPROM_REG_2, 0x00 },
339 { LP8860_EEPROM_REG_3, 0x00 },
340 { LP8860_EEPROM_REG_4, 0x00 },
341 { LP8860_EEPROM_REG_5, 0x00 },
342 { LP8860_EEPROM_REG_6, 0x00 },
343 { LP8860_EEPROM_REG_7, 0x00 },
344 { LP8860_EEPROM_REG_8, 0x00 },
345 { LP8860_EEPROM_REG_9, 0x00 },
346 { LP8860_EEPROM_REG_10, 0x00 },
347 { LP8860_EEPROM_REG_11, 0x00 },
348 { LP8860_EEPROM_REG_12, 0x00 },
349 { LP8860_EEPROM_REG_13, 0x00 },
350 { LP8860_EEPROM_REG_14, 0x00 },
351 { LP8860_EEPROM_REG_15, 0x00 },
352 { LP8860_EEPROM_REG_16, 0x00 },
353 { LP8860_EEPROM_REG_17, 0x00 },
354 { LP8860_EEPROM_REG_18, 0x00 },
355 { LP8860_EEPROM_REG_19, 0x00 },
356 { LP8860_EEPROM_REG_20, 0x00 },
357 { LP8860_EEPROM_REG_21, 0x00 },
358 { LP8860_EEPROM_REG_22, 0x00 },
359 { LP8860_EEPROM_REG_23, 0x00 },
360 { LP8860_EEPROM_REG_24, 0x00 },
361};
362
363static const struct regmap_config lp8860_eeprom_regmap_config = {
364 .reg_bits = 8,
365 .val_bits = 8,
366
367 .max_register = LP8860_EEPROM_REG_24,
368 .reg_defaults = lp8860_eeprom_defs,
369 .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
370 .cache_type = REGCACHE_NONE,
371};
372
373static int lp8860_probe(struct i2c_client *client,
374 const struct i2c_device_id *id)
375{
376 int ret;
377 struct lp8860_led *led;
378 struct device_node *np = client->dev.of_node;
379
380 led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
381 if (!led)
382 return -ENOMEM;
383
384 led->label = LP8860_DISP_LED_NAME;
385
386 if (client->dev.of_node) {
387 ret = of_property_read_string(np, "label", &led->label);
388 if (ret) {
389 dev_err(&client->dev, "Missing label in dt\n");
390 return -EINVAL;
391 }
392 }
393
Uwe Kleine-Königeb2294c2015-03-01 13:25:47 -0800394 led->enable_gpio = devm_gpiod_get_optional(&client->dev,
395 "enable", GPIOD_OUT_LOW);
396 if (IS_ERR(led->enable_gpio)) {
397 ret = PTR_ERR(led->enable_gpio);
398 dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
399 return ret;
400 }
Dan Murphy7a8685a2014-11-19 04:48:35 -0800401
402 led->regulator = devm_regulator_get(&client->dev, "vled");
403 if (IS_ERR(led->regulator))
404 led->regulator = NULL;
405
406 led->client = client;
407 led->led_dev.name = led->label;
408 led->led_dev.max_brightness = LED_FULL;
409 led->led_dev.brightness_set = lp8860_brightness_set;
410
411 mutex_init(&led->lock);
412 INIT_WORK(&led->work, lp8860_led_brightness_work);
413
414 i2c_set_clientdata(client, led);
415
416 led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
417 if (IS_ERR(led->regmap)) {
418 ret = PTR_ERR(led->regmap);
419 dev_err(&client->dev, "Failed to allocate register map: %d\n",
420 ret);
421 return ret;
422 }
423
424 led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
425 if (IS_ERR(led->eeprom_regmap)) {
426 ret = PTR_ERR(led->eeprom_regmap);
427 dev_err(&client->dev, "Failed to allocate register map: %d\n",
428 ret);
429 return ret;
430 }
431
432 ret = lp8860_init(led);
433 if (ret)
434 return ret;
435
436 ret = led_classdev_register(&client->dev, &led->led_dev);
437 if (ret) {
438 dev_err(&client->dev, "led register err: %d\n", ret);
439 return ret;
440 }
441
442 return 0;
443}
444
445static int lp8860_remove(struct i2c_client *client)
446{
447 struct lp8860_led *led = i2c_get_clientdata(client);
448 int ret;
449
450 led_classdev_unregister(&led->led_dev);
451 cancel_work_sync(&led->work);
452
453 if (led->enable_gpio)
454 gpiod_direction_output(led->enable_gpio, 0);
455
456 if (led->regulator) {
457 ret = regulator_disable(led->regulator);
458 if (ret)
459 dev_err(&led->client->dev,
460 "Failed to disable regulator\n");
461 }
462
463 return 0;
464}
465
466static const struct i2c_device_id lp8860_id[] = {
467 { "lp8860", 0 },
468 { }
469};
470MODULE_DEVICE_TABLE(i2c, lp8860_id);
471
472#ifdef CONFIG_OF
473static const struct of_device_id of_lp8860_leds_match[] = {
474 { .compatible = "ti,lp8860", },
475 {},
476};
477MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
478#endif
479
480static struct i2c_driver lp8860_driver = {
481 .driver = {
482 .name = "lp8860",
483 .of_match_table = of_match_ptr(of_lp8860_leds_match),
484 },
485 .probe = lp8860_probe,
486 .remove = lp8860_remove,
487 .id_table = lp8860_id,
488};
489module_i2c_driver(lp8860_driver);
490
Masanari Iida5ee047f2015-03-30 02:50:11 -0700491MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver");
Dan Murphy7a8685a2014-11-19 04:48:35 -0800492MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
493MODULE_LICENSE("GPL");