blob: 3394b7cc1722397c4dd242e535af9ddbffc01eb7 [file] [log] [blame]
Greg Ungerer49aa49b2007-10-23 14:37:54 +10001/****************************************************************************/
2
3/*
4 * mcf.c -- Freescale ColdFire UART driver
5 *
6 * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13
14/****************************************************************************/
15
16#include <linux/kernel.h>
17#include <linux/init.h>
18#include <linux/interrupt.h>
19#include <linux/module.h>
20#include <linux/console.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23#include <linux/serial.h>
24#include <linux/serial_core.h>
25#include <linux/io.h>
26#include <asm/coldfire.h>
27#include <asm/mcfsim.h>
28#include <asm/mcfuart.h>
29#include <asm/nettel.h>
30
31/****************************************************************************/
32
33/*
34 * Some boards implement the DTR/DCD lines using GPIO lines, most
35 * don't. Dummy out the access macros for those that don't. Those
36 * that do should define these macros somewhere in there board
37 * specific inlude files.
38 */
39#if !defined(mcf_getppdcd)
40#define mcf_getppdcd(p) (1)
41#endif
42#if !defined(mcf_getppdtr)
43#define mcf_getppdtr(p) (1)
44#endif
45#if !defined(mcf_setppdtr)
46#define mcf_setppdtr(p, v) do { } while (0)
47#endif
48
49/****************************************************************************/
50
51/*
52 * Local per-uart structure.
53 */
54struct mcf_uart {
55 struct uart_port port;
56 unsigned int sigs; /* Local copy of line sigs */
57 unsigned char imr; /* Local IMR mirror */
58};
59
60/****************************************************************************/
61
62static unsigned int mcf_tx_empty(struct uart_port *port)
63{
64 return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ?
65 TIOCSER_TEMT : 0;
66}
67
68/****************************************************************************/
69
70static unsigned int mcf_get_mctrl(struct uart_port *port)
71{
Greg Ungerer9f69ba82008-02-01 17:38:34 +100072 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +100073 unsigned int sigs;
74
Greg Ungerer49aa49b2007-10-23 14:37:54 +100075 sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
76 0 : TIOCM_CTS;
77 sigs |= (pp->sigs & TIOCM_RTS);
78 sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
79 sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
Yury Georgievskiy0ac83822010-07-20 15:26:50 -070080
Greg Ungerer49aa49b2007-10-23 14:37:54 +100081 return sigs;
82}
83
84/****************************************************************************/
85
86static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
87{
Greg Ungerer9f69ba82008-02-01 17:38:34 +100088 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +100089
Greg Ungerer49aa49b2007-10-23 14:37:54 +100090 pp->sigs = sigs;
91 mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
92 if (sigs & TIOCM_RTS)
93 writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
94 else
95 writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
Greg Ungerer49aa49b2007-10-23 14:37:54 +100096}
97
98/****************************************************************************/
99
100static void mcf_start_tx(struct uart_port *port)
101{
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000102 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000103
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000104 pp->imr |= MCFUART_UIR_TXREADY;
105 writeb(pp->imr, port->membase + MCFUART_UIMR);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000106}
107
108/****************************************************************************/
109
110static void mcf_stop_tx(struct uart_port *port)
111{
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000112 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000113
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000114 pp->imr &= ~MCFUART_UIR_TXREADY;
115 writeb(pp->imr, port->membase + MCFUART_UIMR);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000116}
117
118/****************************************************************************/
119
120static void mcf_stop_rx(struct uart_port *port)
121{
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000122 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000123
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000124 pp->imr &= ~MCFUART_UIR_RXREADY;
125 writeb(pp->imr, port->membase + MCFUART_UIMR);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000126}
127
128/****************************************************************************/
129
130static void mcf_break_ctl(struct uart_port *port, int break_state)
131{
132 unsigned long flags;
133
134 spin_lock_irqsave(&port->lock, flags);
135 if (break_state == -1)
136 writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR);
137 else
138 writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR);
139 spin_unlock_irqrestore(&port->lock, flags);
140}
141
142/****************************************************************************/
143
144static void mcf_enable_ms(struct uart_port *port)
145{
146}
147
148/****************************************************************************/
149
150static int mcf_startup(struct uart_port *port)
151{
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000152 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000153 unsigned long flags;
154
155 spin_lock_irqsave(&port->lock, flags);
156
157 /* Reset UART, get it into known state... */
158 writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
159 writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
160
161 /* Enable the UART transmitter and receiver */
162 writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
163 port->membase + MCFUART_UCR);
164
165 /* Enable RX interrupts now */
166 pp->imr = MCFUART_UIR_RXREADY;
167 writeb(pp->imr, port->membase + MCFUART_UIMR);
168
169 spin_unlock_irqrestore(&port->lock, flags);
170
171 return 0;
172}
173
174/****************************************************************************/
175
176static void mcf_shutdown(struct uart_port *port)
177{
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000178 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000179 unsigned long flags;
180
181 spin_lock_irqsave(&port->lock, flags);
182
183 /* Disable all interrupts now */
184 pp->imr = 0;
185 writeb(pp->imr, port->membase + MCFUART_UIMR);
186
187 /* Disable UART transmitter and receiver */
188 writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
189 writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
190
191 spin_unlock_irqrestore(&port->lock, flags);
192}
193
194/****************************************************************************/
195
196static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
197 struct ktermios *old)
198{
199 unsigned long flags;
200 unsigned int baud, baudclk;
John Adamson26a4bc62008-08-22 16:43:49 +1000201#if defined(CONFIG_M5272)
202 unsigned int baudfr;
203#endif
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000204 unsigned char mr1, mr2;
205
206 baud = uart_get_baud_rate(port, termios, old, 0, 230400);
John Adamson26a4bc62008-08-22 16:43:49 +1000207#if defined(CONFIG_M5272)
208 baudclk = (MCF_BUSCLK / baud) / 32;
209 baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
210#else
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000211 baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
John Adamson26a4bc62008-08-22 16:43:49 +1000212#endif
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000213
214 mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
215 mr2 = 0;
216
217 switch (termios->c_cflag & CSIZE) {
218 case CS5: mr1 |= MCFUART_MR1_CS5; break;
219 case CS6: mr1 |= MCFUART_MR1_CS6; break;
220 case CS7: mr1 |= MCFUART_MR1_CS7; break;
221 case CS8:
222 default: mr1 |= MCFUART_MR1_CS8; break;
223 }
224
225 if (termios->c_cflag & PARENB) {
226 if (termios->c_cflag & CMSPAR) {
227 if (termios->c_cflag & PARODD)
228 mr1 |= MCFUART_MR1_PARITYMARK;
229 else
230 mr1 |= MCFUART_MR1_PARITYSPACE;
231 } else {
232 if (termios->c_cflag & PARODD)
233 mr1 |= MCFUART_MR1_PARITYODD;
234 else
235 mr1 |= MCFUART_MR1_PARITYEVEN;
236 }
237 } else {
238 mr1 |= MCFUART_MR1_PARITYNONE;
239 }
240
241 if (termios->c_cflag & CSTOPB)
242 mr2 |= MCFUART_MR2_STOP2;
243 else
244 mr2 |= MCFUART_MR2_STOP1;
245
246 if (termios->c_cflag & CRTSCTS) {
247 mr1 |= MCFUART_MR1_RXRTS;
248 mr2 |= MCFUART_MR2_TXCTS;
249 }
250
251 spin_lock_irqsave(&port->lock, flags);
Philippe De Muyter3732b68f2010-04-02 17:56:08 +0200252 uart_update_timeout(port, termios->c_cflag, baud);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000253 writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
254 writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
255 writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
256 writeb(mr1, port->membase + MCFUART_UMR);
257 writeb(mr2, port->membase + MCFUART_UMR);
258 writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
259 writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
John Adamson26a4bc62008-08-22 16:43:49 +1000260#if defined(CONFIG_M5272)
261 writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
262#endif
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000263 writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
264 port->membase + MCFUART_UCSR);
265 writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
266 port->membase + MCFUART_UCR);
267 spin_unlock_irqrestore(&port->lock, flags);
268}
269
270/****************************************************************************/
271
272static void mcf_rx_chars(struct mcf_uart *pp)
273{
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000274 struct uart_port *port = &pp->port;
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000275 unsigned char status, ch, flag;
276
277 while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) {
278 ch = readb(port->membase + MCFUART_URB);
279 flag = TTY_NORMAL;
280 port->icount.rx++;
281
282 if (status & MCFUART_USR_RXERR) {
283 writeb(MCFUART_UCR_CMDRESETERR,
284 port->membase + MCFUART_UCR);
285
286 if (status & MCFUART_USR_RXBREAK) {
287 port->icount.brk++;
288 if (uart_handle_break(port))
289 continue;
290 } else if (status & MCFUART_USR_RXPARITY) {
291 port->icount.parity++;
292 } else if (status & MCFUART_USR_RXOVERRUN) {
293 port->icount.overrun++;
294 } else if (status & MCFUART_USR_RXFRAMING) {
295 port->icount.frame++;
296 }
297
298 status &= port->read_status_mask;
299
300 if (status & MCFUART_USR_RXBREAK)
301 flag = TTY_BREAK;
302 else if (status & MCFUART_USR_RXPARITY)
303 flag = TTY_PARITY;
304 else if (status & MCFUART_USR_RXFRAMING)
305 flag = TTY_FRAME;
306 }
307
308 if (uart_handle_sysrq_char(port, ch))
309 continue;
310 uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
311 }
312
Alan Coxebd2c8f2009-09-19 13:13:28 -0700313 tty_flip_buffer_push(port->state->port.tty);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000314}
315
316/****************************************************************************/
317
318static void mcf_tx_chars(struct mcf_uart *pp)
319{
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000320 struct uart_port *port = &pp->port;
Alan Coxebd2c8f2009-09-19 13:13:28 -0700321 struct circ_buf *xmit = &port->state->xmit;
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000322
323 if (port->x_char) {
324 /* Send special char - probably flow control */
325 writeb(port->x_char, port->membase + MCFUART_UTB);
326 port->x_char = 0;
327 port->icount.tx++;
328 return;
329 }
330
331 while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
332 if (xmit->head == xmit->tail)
333 break;
334 writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
335 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
336 port->icount.tx++;
337 }
338
339 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
340 uart_write_wakeup(port);
341
342 if (xmit->head == xmit->tail) {
343 pp->imr &= ~MCFUART_UIR_TXREADY;
344 writeb(pp->imr, port->membase + MCFUART_UIMR);
345 }
346}
347
348/****************************************************************************/
349
350static irqreturn_t mcf_interrupt(int irq, void *data)
351{
352 struct uart_port *port = data;
Greg Ungerer9f69ba82008-02-01 17:38:34 +1000353 struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000354 unsigned int isr;
Yury Georgievskiy0ac83822010-07-20 15:26:50 -0700355 irqreturn_t ret = IRQ_NONE;
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000356
357 isr = readb(port->membase + MCFUART_UISR) & pp->imr;
Yury Georgievskiy0ac83822010-07-20 15:26:50 -0700358
359 spin_lock(&port->lock);
360 if (isr & MCFUART_UIR_RXREADY) {
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000361 mcf_rx_chars(pp);
Yury Georgievskiy0ac83822010-07-20 15:26:50 -0700362 ret = IRQ_HANDLED;
363 }
364 if (isr & MCFUART_UIR_TXREADY) {
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000365 mcf_tx_chars(pp);
Yury Georgievskiy0ac83822010-07-20 15:26:50 -0700366 ret = IRQ_HANDLED;
367 }
368 spin_unlock(&port->lock);
369
370 return ret;
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000371}
372
373/****************************************************************************/
374
375static void mcf_config_port(struct uart_port *port, int flags)
376{
377 port->type = PORT_MCF;
Philippe De Muyter3732b68f2010-04-02 17:56:08 +0200378 port->fifosize = MCFUART_TXFIFOSIZE;
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000379
380 /* Clear mask, so no surprise interrupts. */
381 writeb(0, port->membase + MCFUART_UIMR);
382
383 if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port))
384 printk(KERN_ERR "MCF: unable to attach ColdFire UART %d "
385 "interrupt vector=%d\n", port->line, port->irq);
386}
387
388/****************************************************************************/
389
390static const char *mcf_type(struct uart_port *port)
391{
392 return (port->type == PORT_MCF) ? "ColdFire UART" : NULL;
393}
394
395/****************************************************************************/
396
397static int mcf_request_port(struct uart_port *port)
398{
399 /* UARTs always present */
400 return 0;
401}
402
403/****************************************************************************/
404
405static void mcf_release_port(struct uart_port *port)
406{
407 /* Nothing to release... */
408}
409
410/****************************************************************************/
411
412static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
413{
414 if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF))
415 return -EINVAL;
416 return 0;
417}
418
419/****************************************************************************/
420
421/*
422 * Define the basic serial functions we support.
423 */
Philippe De Muyter3732b68f2010-04-02 17:56:08 +0200424static const struct uart_ops mcf_uart_ops = {
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000425 .tx_empty = mcf_tx_empty,
426 .get_mctrl = mcf_get_mctrl,
427 .set_mctrl = mcf_set_mctrl,
428 .start_tx = mcf_start_tx,
429 .stop_tx = mcf_stop_tx,
430 .stop_rx = mcf_stop_rx,
431 .enable_ms = mcf_enable_ms,
432 .break_ctl = mcf_break_ctl,
433 .startup = mcf_startup,
434 .shutdown = mcf_shutdown,
435 .set_termios = mcf_set_termios,
436 .type = mcf_type,
437 .request_port = mcf_request_port,
438 .release_port = mcf_release_port,
439 .config_port = mcf_config_port,
440 .verify_port = mcf_verify_port,
441};
442
Philippe De Muyter2545cf62010-03-18 11:37:13 +0100443static struct mcf_uart mcf_ports[4];
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000444
Greg Ungerer16791962008-02-04 22:29:56 -0800445#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports)
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000446
447/****************************************************************************/
448#if defined(CONFIG_SERIAL_MCF_CONSOLE)
449/****************************************************************************/
450
451int __init early_mcf_setup(struct mcf_platform_uart *platp)
452{
453 struct uart_port *port;
454 int i;
455
456 for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
457 port = &mcf_ports[i].port;
458
459 port->line = i;
460 port->type = PORT_MCF;
461 port->mapbase = platp[i].mapbase;
462 port->membase = (platp[i].membase) ? platp[i].membase :
463 (unsigned char __iomem *) port->mapbase;
464 port->iotype = SERIAL_IO_MEM;
465 port->irq = platp[i].irq;
466 port->uartclk = MCF_BUSCLK;
467 port->flags = ASYNC_BOOT_AUTOCONF;
468 port->ops = &mcf_uart_ops;
469 }
470
471 return 0;
472}
473
474/****************************************************************************/
475
476static void mcf_console_putc(struct console *co, const char c)
477{
478 struct uart_port *port = &(mcf_ports + co->index)->port;
479 int i;
480
481 for (i = 0; (i < 0x10000); i++) {
482 if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
483 break;
484 }
485 writeb(c, port->membase + MCFUART_UTB);
486 for (i = 0; (i < 0x10000); i++) {
487 if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
488 break;
489 }
490}
491
492/****************************************************************************/
493
494static void mcf_console_write(struct console *co, const char *s, unsigned int count)
495{
496 for (; (count); count--, s++) {
497 mcf_console_putc(co, *s);
498 if (*s == '\n')
499 mcf_console_putc(co, '\r');
500 }
501}
502
503/****************************************************************************/
504
505static int __init mcf_console_setup(struct console *co, char *options)
506{
507 struct uart_port *port;
508 int baud = CONFIG_SERIAL_MCF_BAUDRATE;
509 int bits = 8;
510 int parity = 'n';
511 int flow = 'n';
512
Len Sorensen4330e172009-02-05 10:11:24 +1000513 if ((co->index < 0) || (co->index >= MCF_MAXPORTS))
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000514 co->index = 0;
515 port = &mcf_ports[co->index].port;
516 if (port->membase == 0)
517 return -ENODEV;
518
519 if (options)
520 uart_parse_options(options, &baud, &parity, &bits, &flow);
521
522 return uart_set_options(port, co, baud, parity, bits, flow);
523}
524
525/****************************************************************************/
526
527static struct uart_driver mcf_driver;
528
529static struct console mcf_console = {
530 .name = "ttyS",
531 .write = mcf_console_write,
532 .device = uart_console_device,
533 .setup = mcf_console_setup,
534 .flags = CON_PRINTBUFFER,
535 .index = -1,
536 .data = &mcf_driver,
537};
538
539static int __init mcf_console_init(void)
540{
541 register_console(&mcf_console);
542 return 0;
543}
544
545console_initcall(mcf_console_init);
546
547#define MCF_CONSOLE &mcf_console
548
549/****************************************************************************/
550#else
551/****************************************************************************/
552
553#define MCF_CONSOLE NULL
554
555/****************************************************************************/
556#endif /* CONFIG_MCF_CONSOLE */
557/****************************************************************************/
558
559/*
560 * Define the mcf UART driver structure.
561 */
562static struct uart_driver mcf_driver = {
563 .owner = THIS_MODULE,
564 .driver_name = "mcf",
565 .dev_name = "ttyS",
566 .major = TTY_MAJOR,
567 .minor = 64,
568 .nr = MCF_MAXPORTS,
569 .cons = MCF_CONSOLE,
570};
571
572/****************************************************************************/
573
574static int __devinit mcf_probe(struct platform_device *pdev)
575{
576 struct mcf_platform_uart *platp = pdev->dev.platform_data;
577 struct uart_port *port;
578 int i;
579
580 for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
581 port = &mcf_ports[i].port;
582
583 port->line = i;
584 port->type = PORT_MCF;
585 port->mapbase = platp[i].mapbase;
586 port->membase = (platp[i].membase) ? platp[i].membase :
587 (unsigned char __iomem *) platp[i].mapbase;
588 port->iotype = SERIAL_IO_MEM;
589 port->irq = platp[i].irq;
590 port->uartclk = MCF_BUSCLK;
591 port->ops = &mcf_uart_ops;
592 port->flags = ASYNC_BOOT_AUTOCONF;
593
594 uart_add_one_port(&mcf_driver, port);
595 }
596
597 return 0;
598}
599
600/****************************************************************************/
601
Uwe Kleine-Königd6f80e32009-10-01 10:28:15 +0200602static int __devexit mcf_remove(struct platform_device *pdev)
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000603{
604 struct uart_port *port;
605 int i;
606
607 for (i = 0; (i < MCF_MAXPORTS); i++) {
608 port = &mcf_ports[i].port;
609 if (port)
610 uart_remove_one_port(&mcf_driver, port);
611 }
612
613 return 0;
614}
615
616/****************************************************************************/
617
618static struct platform_driver mcf_platform_driver = {
619 .probe = mcf_probe,
620 .remove = __devexit_p(mcf_remove),
621 .driver = {
622 .name = "mcfuart",
623 .owner = THIS_MODULE,
624 },
625};
626
627/****************************************************************************/
628
629static int __init mcf_init(void)
630{
631 int rc;
632
633 printk("ColdFire internal UART serial driver\n");
634
635 rc = uart_register_driver(&mcf_driver);
636 if (rc)
637 return rc;
638 rc = platform_driver_register(&mcf_platform_driver);
639 if (rc)
640 return rc;
641 return 0;
642}
643
644/****************************************************************************/
645
646static void __exit mcf_exit(void)
647{
648 platform_driver_unregister(&mcf_platform_driver);
649 uart_unregister_driver(&mcf_driver);
650}
651
652/****************************************************************************/
653
654module_init(mcf_init);
655module_exit(mcf_exit);
656
657MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
658MODULE_DESCRIPTION("Freescale ColdFire UART driver");
659MODULE_LICENSE("GPL");
Kay Sieverse169c132008-04-15 14:34:35 -0700660MODULE_ALIAS("platform:mcfuart");
Greg Ungerer49aa49b2007-10-23 14:37:54 +1000661
662/****************************************************************************/