Peter Meerwald | 6c25539 | 2014-05-07 13:38:00 +0100 | [diff] [blame] | 1 | /* |
| 2 | * isl29125.c - Support for Intersil ISL29125 RGB light sensor |
| 3 | * |
| 4 | * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> |
| 5 | * |
| 6 | * This file is subject to the terms and conditions of version 2 of |
| 7 | * the GNU General Public License. See the file COPYING in the main |
| 8 | * directory of this archive for more details. |
| 9 | * |
| 10 | * RGB light sensor with 16-bit channels for red, green, blue); |
| 11 | * 7-bit I2C slave address 0x44 |
| 12 | * |
| 13 | * TODO: interrupt support, IR compensation, thresholds, 12bit |
| 14 | */ |
| 15 | |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/i2c.h> |
| 18 | #include <linux/delay.h> |
| 19 | #include <linux/pm.h> |
| 20 | |
| 21 | #include <linux/iio/iio.h> |
| 22 | #include <linux/iio/sysfs.h> |
| 23 | #include <linux/iio/trigger_consumer.h> |
| 24 | #include <linux/iio/buffer.h> |
| 25 | #include <linux/iio/triggered_buffer.h> |
| 26 | |
| 27 | #define ISL29125_DRV_NAME "isl29125" |
| 28 | |
| 29 | #define ISL29125_DEVICE_ID 0x00 |
| 30 | #define ISL29125_CONF1 0x01 |
| 31 | #define ISL29125_CONF2 0x02 |
| 32 | #define ISL29125_CONF3 0x03 |
| 33 | #define ISL29125_STATUS 0x08 |
| 34 | #define ISL29125_GREEN_DATA 0x09 |
| 35 | #define ISL29125_RED_DATA 0x0b |
| 36 | #define ISL29125_BLUE_DATA 0x0d |
| 37 | |
| 38 | #define ISL29125_ID 0x7d |
| 39 | |
| 40 | #define ISL29125_MODE_MASK GENMASK(2, 0) |
| 41 | #define ISL29125_MODE_PD 0x0 |
| 42 | #define ISL29125_MODE_G 0x1 |
| 43 | #define ISL29125_MODE_R 0x2 |
| 44 | #define ISL29125_MODE_B 0x3 |
| 45 | #define ISL29125_MODE_RGB 0x5 |
| 46 | |
| 47 | #define ISL29125_MODE_RANGE BIT(3) |
| 48 | |
| 49 | #define ISL29125_STATUS_CONV BIT(1) |
| 50 | |
| 51 | struct isl29125_data { |
| 52 | struct i2c_client *client; |
| 53 | struct mutex lock; |
| 54 | u8 conf1; |
| 55 | u16 buffer[8]; /* 3x 16-bit, padding, 8 bytes timestamp */ |
| 56 | }; |
| 57 | |
| 58 | #define ISL29125_CHANNEL(_color, _si) { \ |
| 59 | .type = IIO_INTENSITY, \ |
| 60 | .modified = 1, \ |
| 61 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| 62 | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| 63 | .channel2 = IIO_MOD_LIGHT_##_color, \ |
| 64 | .scan_index = _si, \ |
| 65 | .scan_type = { \ |
| 66 | .sign = 'u', \ |
| 67 | .realbits = 16, \ |
| 68 | .storagebits = 16, \ |
| 69 | .endianness = IIO_CPU, \ |
| 70 | }, \ |
| 71 | } |
| 72 | |
| 73 | static const struct iio_chan_spec isl29125_channels[] = { |
| 74 | ISL29125_CHANNEL(GREEN, 0), |
| 75 | ISL29125_CHANNEL(RED, 1), |
| 76 | ISL29125_CHANNEL(BLUE, 2), |
| 77 | IIO_CHAN_SOFT_TIMESTAMP(3), |
| 78 | }; |
| 79 | |
| 80 | static const struct { |
| 81 | u8 mode, data; |
| 82 | } isl29125_regs[] = { |
| 83 | {ISL29125_MODE_G, ISL29125_GREEN_DATA}, |
| 84 | {ISL29125_MODE_R, ISL29125_RED_DATA}, |
| 85 | {ISL29125_MODE_B, ISL29125_BLUE_DATA}, |
| 86 | }; |
| 87 | |
| 88 | static int isl29125_read_data(struct isl29125_data *data, int si) |
| 89 | { |
| 90 | int tries = 5; |
| 91 | int ret; |
| 92 | |
| 93 | ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, |
| 94 | data->conf1 | isl29125_regs[si].mode); |
| 95 | if (ret < 0) |
| 96 | return ret; |
| 97 | |
| 98 | msleep(101); |
| 99 | |
| 100 | while (tries--) { |
| 101 | ret = i2c_smbus_read_byte_data(data->client, ISL29125_STATUS); |
| 102 | if (ret < 0) |
| 103 | goto fail; |
| 104 | if (ret & ISL29125_STATUS_CONV) |
| 105 | break; |
| 106 | msleep(20); |
| 107 | } |
| 108 | |
| 109 | if (tries < 0) { |
| 110 | dev_err(&data->client->dev, "data not ready\n"); |
| 111 | ret = -EIO; |
| 112 | goto fail; |
| 113 | } |
| 114 | |
| 115 | ret = i2c_smbus_read_word_data(data->client, isl29125_regs[si].data); |
| 116 | |
| 117 | fail: |
| 118 | i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, data->conf1); |
| 119 | return ret; |
| 120 | } |
| 121 | |
| 122 | static int isl29125_read_raw(struct iio_dev *indio_dev, |
| 123 | struct iio_chan_spec const *chan, |
| 124 | int *val, int *val2, long mask) |
| 125 | { |
| 126 | struct isl29125_data *data = iio_priv(indio_dev); |
| 127 | int ret; |
| 128 | |
| 129 | switch (mask) { |
| 130 | case IIO_CHAN_INFO_RAW: |
| 131 | if (iio_buffer_enabled(indio_dev)) |
| 132 | return -EBUSY; |
| 133 | mutex_lock(&data->lock); |
| 134 | ret = isl29125_read_data(data, chan->scan_index); |
| 135 | mutex_unlock(&data->lock); |
| 136 | if (ret < 0) |
| 137 | return ret; |
| 138 | *val = ret; |
| 139 | return IIO_VAL_INT; |
| 140 | case IIO_CHAN_INFO_SCALE: |
| 141 | *val = 0; |
| 142 | if (data->conf1 & ISL29125_MODE_RANGE) |
| 143 | *val2 = 152590; /* 10k lux full range */ |
| 144 | else |
| 145 | *val2 = 5722; /* 375 lux full range */ |
| 146 | return IIO_VAL_INT_PLUS_MICRO; |
| 147 | } |
| 148 | return -EINVAL; |
| 149 | } |
| 150 | |
| 151 | static int isl29125_write_raw(struct iio_dev *indio_dev, |
| 152 | struct iio_chan_spec const *chan, |
| 153 | int val, int val2, long mask) |
| 154 | { |
| 155 | struct isl29125_data *data = iio_priv(indio_dev); |
| 156 | |
| 157 | switch (mask) { |
| 158 | case IIO_CHAN_INFO_SCALE: |
| 159 | if (val != 0) |
| 160 | return -EINVAL; |
| 161 | if (val2 == 152590) |
| 162 | data->conf1 |= ISL29125_MODE_RANGE; |
| 163 | else if (val2 == 5722) |
| 164 | data->conf1 &= ~ISL29125_MODE_RANGE; |
| 165 | else |
| 166 | return -EINVAL; |
| 167 | return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, |
| 168 | data->conf1); |
| 169 | default: |
| 170 | return -EINVAL; |
| 171 | } |
| 172 | } |
| 173 | |
| 174 | static irqreturn_t isl29125_trigger_handler(int irq, void *p) |
| 175 | { |
| 176 | struct iio_poll_func *pf = p; |
| 177 | struct iio_dev *indio_dev = pf->indio_dev; |
| 178 | struct isl29125_data *data = iio_priv(indio_dev); |
| 179 | int i, j = 0; |
| 180 | |
| 181 | for_each_set_bit(i, indio_dev->active_scan_mask, |
| 182 | indio_dev->masklength) { |
| 183 | int ret = i2c_smbus_read_word_data(data->client, |
| 184 | isl29125_regs[i].data); |
| 185 | if (ret < 0) |
| 186 | goto done; |
| 187 | |
| 188 | data->buffer[j++] = ret; |
| 189 | } |
| 190 | |
| 191 | iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, |
| 192 | iio_get_time_ns()); |
| 193 | |
| 194 | done: |
| 195 | iio_trigger_notify_done(indio_dev->trig); |
| 196 | |
| 197 | return IRQ_HANDLED; |
| 198 | } |
| 199 | |
| 200 | static const struct iio_info isl29125_info = { |
| 201 | .read_raw = isl29125_read_raw, |
| 202 | .write_raw = isl29125_write_raw, |
| 203 | .driver_module = THIS_MODULE, |
| 204 | }; |
| 205 | |
| 206 | static int isl29125_buffer_preenable(struct iio_dev *indio_dev) |
| 207 | { |
| 208 | struct isl29125_data *data = iio_priv(indio_dev); |
| 209 | |
| 210 | data->conf1 |= ISL29125_MODE_RGB; |
| 211 | return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, |
| 212 | data->conf1); |
| 213 | } |
| 214 | |
| 215 | static int isl29125_buffer_predisable(struct iio_dev *indio_dev) |
| 216 | { |
| 217 | struct isl29125_data *data = iio_priv(indio_dev); |
| 218 | int ret; |
| 219 | |
| 220 | ret = iio_triggered_buffer_predisable(indio_dev); |
| 221 | if (ret < 0) |
| 222 | return ret; |
| 223 | |
| 224 | data->conf1 &= ~ISL29125_MODE_MASK; |
| 225 | data->conf1 |= ISL29125_MODE_PD; |
| 226 | return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, |
| 227 | data->conf1); |
| 228 | } |
| 229 | |
| 230 | static const struct iio_buffer_setup_ops isl29125_buffer_setup_ops = { |
| 231 | .preenable = isl29125_buffer_preenable, |
| 232 | .postenable = &iio_triggered_buffer_postenable, |
| 233 | .predisable = isl29125_buffer_predisable, |
| 234 | }; |
| 235 | |
| 236 | static int isl29125_probe(struct i2c_client *client, |
| 237 | const struct i2c_device_id *id) |
| 238 | { |
| 239 | struct isl29125_data *data; |
| 240 | struct iio_dev *indio_dev; |
| 241 | int ret; |
| 242 | |
| 243 | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| 244 | if (indio_dev == NULL) |
| 245 | return -ENOMEM; |
| 246 | |
| 247 | data = iio_priv(indio_dev); |
| 248 | i2c_set_clientdata(client, indio_dev); |
| 249 | data->client = client; |
| 250 | mutex_init(&data->lock); |
| 251 | |
| 252 | indio_dev->dev.parent = &client->dev; |
| 253 | indio_dev->info = &isl29125_info; |
| 254 | indio_dev->name = ISL29125_DRV_NAME; |
| 255 | indio_dev->channels = isl29125_channels; |
| 256 | indio_dev->num_channels = ARRAY_SIZE(isl29125_channels); |
| 257 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 258 | |
| 259 | ret = i2c_smbus_read_byte_data(data->client, ISL29125_DEVICE_ID); |
| 260 | if (ret < 0) |
| 261 | return ret; |
| 262 | if (ret != ISL29125_ID) |
| 263 | return -ENODEV; |
| 264 | |
| 265 | data->conf1 = ISL29125_MODE_PD | ISL29125_MODE_RANGE; |
| 266 | ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, |
| 267 | data->conf1); |
| 268 | if (ret < 0) |
| 269 | return ret; |
| 270 | |
| 271 | ret = i2c_smbus_write_byte_data(data->client, ISL29125_STATUS, 0); |
| 272 | if (ret < 0) |
| 273 | return ret; |
| 274 | |
| 275 | ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| 276 | isl29125_trigger_handler, &isl29125_buffer_setup_ops); |
| 277 | if (ret < 0) |
| 278 | return ret; |
| 279 | |
| 280 | ret = iio_device_register(indio_dev); |
| 281 | if (ret < 0) |
| 282 | goto buffer_cleanup; |
| 283 | |
| 284 | return 0; |
| 285 | |
| 286 | buffer_cleanup: |
| 287 | iio_triggered_buffer_cleanup(indio_dev); |
| 288 | return ret; |
| 289 | } |
| 290 | |
| 291 | static int isl29125_powerdown(struct isl29125_data *data) |
| 292 | { |
| 293 | return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, |
| 294 | (data->conf1 & ~ISL29125_MODE_MASK) | ISL29125_MODE_PD); |
| 295 | } |
| 296 | |
| 297 | static int isl29125_remove(struct i2c_client *client) |
| 298 | { |
| 299 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 300 | |
| 301 | iio_device_unregister(indio_dev); |
| 302 | iio_triggered_buffer_cleanup(indio_dev); |
| 303 | isl29125_powerdown(iio_priv(indio_dev)); |
| 304 | |
| 305 | return 0; |
| 306 | } |
| 307 | |
| 308 | #ifdef CONFIG_PM_SLEEP |
| 309 | static int isl29125_suspend(struct device *dev) |
| 310 | { |
| 311 | struct isl29125_data *data = iio_priv(i2c_get_clientdata( |
| 312 | to_i2c_client(dev))); |
| 313 | return isl29125_powerdown(data); |
| 314 | } |
| 315 | |
| 316 | static int isl29125_resume(struct device *dev) |
| 317 | { |
| 318 | struct isl29125_data *data = iio_priv(i2c_get_clientdata( |
| 319 | to_i2c_client(dev))); |
| 320 | return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, |
| 321 | data->conf1); |
| 322 | } |
| 323 | #endif |
| 324 | |
| 325 | static SIMPLE_DEV_PM_OPS(isl29125_pm_ops, isl29125_suspend, isl29125_resume); |
| 326 | |
| 327 | static const struct i2c_device_id isl29125_id[] = { |
| 328 | { "isl29125", 0 }, |
| 329 | { } |
| 330 | }; |
| 331 | MODULE_DEVICE_TABLE(i2c, isl29125_id); |
| 332 | |
| 333 | static struct i2c_driver isl29125_driver = { |
| 334 | .driver = { |
| 335 | .name = ISL29125_DRV_NAME, |
| 336 | .pm = &isl29125_pm_ops, |
| 337 | .owner = THIS_MODULE, |
| 338 | }, |
| 339 | .probe = isl29125_probe, |
| 340 | .remove = isl29125_remove, |
| 341 | .id_table = isl29125_id, |
| 342 | }; |
| 343 | module_i2c_driver(isl29125_driver); |
| 344 | |
| 345 | MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); |
| 346 | MODULE_DESCRIPTION("ISL29125 RGB light sensor driver"); |
| 347 | MODULE_LICENSE("GPL"); |