| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 1 | Kernel driver adm1275 |
| 2 | ===================== |
| 3 | |
| 4 | Supported chips: |
| Guenter Roeck | 9271126 | 2012-02-24 03:40:53 -0800 | [diff] [blame] | 5 | * Analog Devices ADM1075 |
| 6 | Prefix: 'adm1075' |
| 7 | Addresses scanned: - |
| 8 | Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 9 | * Analog Devices ADM1275 |
| 10 | Prefix: 'adm1275' |
| 11 | Addresses scanned: - |
| 12 | Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf |
| Guenter Roeck | 5cf231a | 2011-07-14 11:55:35 -0700 | [diff] [blame] | 13 | * Analog Devices ADM1276 |
| 14 | Prefix: 'adm1276' |
| 15 | Addresses scanned: - |
| 16 | Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 17 | |
| Guenter Roeck | e3333e5 | 2013-02-20 20:58:42 -0800 | [diff] [blame] | 18 | Author: Guenter Roeck <linux@roeck-us.net> |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 19 | |
| 20 | |
| 21 | Description |
| 22 | ----------- |
| 23 | |
| Guenter Roeck | 9271126 | 2012-02-24 03:40:53 -0800 | [diff] [blame] | 24 | This driver supports hardware montoring for Analog Devices ADM1075, ADM1275, |
| 25 | and ADM1276 Hot-Swap Controller and Digital Power Monitor. |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 26 | |
| Guenter Roeck | 9271126 | 2012-02-24 03:40:53 -0800 | [diff] [blame] | 27 | ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit |
| 28 | board to be removed from or inserted into a live backplane. They also feature |
| 29 | current and voltage readback via an integrated 12-bit analog-to-digital |
| 30 | converter (ADC), accessed using a PMBus interface. |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 31 | |
| 32 | The driver is a client driver to the core PMBus driver. Please see |
| 33 | Documentation/hwmon/pmbus for details on PMBus client drivers. |
| 34 | |
| 35 | |
| 36 | Usage Notes |
| 37 | ----------- |
| 38 | |
| 39 | This driver does not auto-detect devices. You will have to instantiate the |
| 40 | devices explicitly. Please see Documentation/i2c/instantiating-devices for |
| 41 | details. |
| 42 | |
| Guenter Roeck | 9271126 | 2012-02-24 03:40:53 -0800 | [diff] [blame] | 43 | The ADM1075, unlike many other PMBus devices, does not support internal voltage |
| 44 | or current scaling. Reported voltages, currents, and power are raw measurements, |
| 45 | and will typically have to be scaled. |
| 46 | |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 47 | |
| 48 | Platform data support |
| 49 | --------------------- |
| 50 | |
| 51 | The driver supports standard PMBus driver platform data. Please see |
| 52 | Documentation/hwmon/pmbus for details. |
| 53 | |
| 54 | |
| 55 | Sysfs entries |
| 56 | ------------- |
| 57 | |
| Guenter Roeck | c576e30 | 2011-07-09 11:17:33 -0700 | [diff] [blame] | 58 | The following attributes are supported. Limits are read-write, history reset |
| 59 | attributes are write-only, all other attributes are read-only. |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 60 | |
| 61 | in1_label "vin1" or "vout1" depending on chip variant and |
| Guenter Roeck | 9271126 | 2012-02-24 03:40:53 -0800 | [diff] [blame] | 62 | configuration. On ADM1075, vout1 reports the voltage on |
| 63 | the VAUX pin. |
| Guenter Roeck | 5cf231a | 2011-07-14 11:55:35 -0700 | [diff] [blame] | 64 | in1_input Measured voltage. |
| Masanari Iida | 40e4712 | 2012-03-04 23:16:11 +0900 | [diff] [blame] | 65 | in1_min Minimum Voltage. |
| Guenter Roeck | 5cf231a | 2011-07-14 11:55:35 -0700 | [diff] [blame] | 66 | in1_max Maximum voltage. |
| 67 | in1_min_alarm Voltage low alarm. |
| 68 | in1_max_alarm Voltage high alarm. |
| Guenter Roeck | c576e30 | 2011-07-09 11:17:33 -0700 | [diff] [blame] | 69 | in1_highest Historical maximum voltage. |
| 70 | in1_reset_history Write any value to reset history. |
| Guenter Roeck | 83f7649 | 2011-03-17 13:16:01 -0700 | [diff] [blame] | 71 | |
| 72 | curr1_label "iout1" |
| Guenter Roeck | 5cf231a | 2011-07-14 11:55:35 -0700 | [diff] [blame] | 73 | curr1_input Measured current. |
| 74 | curr1_max Maximum current. |
| 75 | curr1_max_alarm Current high alarm. |
| Guenter Roeck | c5e6763 | 2011-08-02 11:08:57 -0700 | [diff] [blame] | 76 | curr1_lcrit Critical minimum current. Depending on the chip |
| 77 | configuration, either curr1_lcrit or curr1_crit is |
| 78 | supported, but not both. |
| 79 | curr1_lcrit_alarm Critical current low alarm. |
| 80 | curr1_crit Critical maximum current. Depending on the chip |
| 81 | configuration, either curr1_lcrit or curr1_crit is |
| 82 | supported, but not both. |
| 83 | curr1_crit_alarm Critical current high alarm. |
| Guenter Roeck | c576e30 | 2011-07-09 11:17:33 -0700 | [diff] [blame] | 84 | curr1_highest Historical maximum current. |
| 85 | curr1_reset_history Write any value to reset history. |
| Guenter Roeck | 9271126 | 2012-02-24 03:40:53 -0800 | [diff] [blame] | 86 | |
| 87 | power1_label "pin1" |
| 88 | power1_input Input power. |
| 89 | power1_reset_history Write any value to reset history. |
| 90 | |
| 91 | Power attributes are supported on ADM1075 and ADM1276 |
| 92 | only. |