Jakub Schmidtke | fb53440 | 2008-11-04 23:46:58 -0800 | [diff] [blame] | 1 | |
| 2 | Driver for Asus OLED display present in some Asus laptops. |
| 3 | |
| 4 | The code of this driver is based on 'asusoled' program taken from |
Justin P. Mattock | 631dd1a | 2010-10-18 11:03:14 +0200 | [diff] [blame] | 5 | <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple |
Jakub Schmidtke | fb53440 | 2008-11-04 23:46:58 -0800 | [diff] [blame] | 6 | kernel driver for controlling this device, but I didn't know how |
| 7 | to do that. Now I know ;) Also, that program can not be used |
| 8 | with usbhid loaded, which means no USB mouse/keyboard while |
| 9 | controlling OLED display :( |
| 10 | |
| 11 | It has been tested on Asus G1 and didn't cause any problems, |
| 12 | but I don't guarantee that it won't do anything wrong :) |
| 13 | |
| 14 | It can (and probably does) have errors. It is usable |
| 15 | in my case, and I hope others will find it useful too! |
| 16 | |
| 17 | ******* |
| 18 | |
| 19 | Building the module |
| 20 | |
| 21 | To build the module you need kernel 2.6 include files and some C compiler. |
| 22 | |
| 23 | Just run: |
| 24 | make |
| 25 | make install (as a root) |
| 26 | |
| 27 | It will build (hopefully) the module and install it in |
| 28 | /lib/modules/'uname -r'/extra/asus_oled.ko. |
| 29 | |
| 30 | To load it just use: |
| 31 | modprobe asus_oled |
| 32 | |
| 33 | You can check if it has detected your OLED display by looking into dmesg output. |
| 34 | There should be something like this: |
| 35 | asus-oled 2-7:1.0: Attached Asus OLED device |
| 36 | |
| 37 | If it doesn't find your display, you can try removing usbhid module. |
| 38 | If you add asus_oled into the list of modules loaded during system boot |
| 39 | before usbhid, it will work even when usbhid is present. |
| 40 | |
| 41 | If it still doesn't detect your hardware, check lsusb output. |
| 42 | There should be similar line: |
| 43 | Bus 002 Device 005: ID 0b05:1726 ASUSTek Computer, Inc. |
| 44 | |
| 45 | If you don't see any lines with '0b05:1726' it means that you have different |
| 46 | type of hardware that is not detected (it may or may not work, but the driver |
| 47 | knows only '0b05:1726' device). |
| 48 | |
| 49 | ******* |
| 50 | |
| 51 | Configuration |
| 52 | |
| 53 | There is only one option: start_off. |
| 54 | You can use it by: 'modprobe asus_oled start_off=1', or by adding this |
| 55 | line to /etc/modprobe.conf: |
| 56 | options asus_oled start_off=1 |
| 57 | |
| 58 | With this option provided, asus_oled driver will switch off the display |
| 59 | when it is detected and attached. It is nice feature to just switch off the 'ASUS' |
| 60 | logo. If you don't use the display, it is probably the good idea to switch it off, |
| 61 | to protect OLEDs from "wearing off". |
| 62 | |
| 63 | ******* |
| 64 | |
| 65 | Usage |
| 66 | |
| 67 | This module can be controlled with two special files: |
| 68 | /sys/class/asus_oled/oled_N/enabled |
| 69 | /sys/class/asus_oled/oled_N/picture |
| 70 | |
| 71 | (N is the device number, the first, and probably the only, has number 1, |
| 72 | so it is /sys/class/asus_oled/oled_1/enabled |
| 73 | and /sys/class/asus_oled/oled_1/picture) |
| 74 | |
| 75 | 'enabled' files is for reading and writing, 'picture' is writeable only. |
| 76 | |
| 77 | You can write 0 or 1 to 'enabled' file, which will switch |
| 78 | on and off the display. Reading from this file will tell you the last |
| 79 | status set, either 0 or 1. By default it is 1, so if the device was set to 'off', |
| 80 | and the computer was rebooted without power-off, this file will contain wrong |
| 81 | value - because the device is off, but hasn't been disabled this time and is |
| 82 | assumed to be on... |
| 83 | |
| 84 | To 'picture' file you write pictures to be displayed by the OLED device. |
| 85 | The format of the file: |
| 86 | <M:WxH> |
| 87 | 00001110010111000 |
| 88 | 00010101010101010 |
| 89 | .... |
| 90 | |
| 91 | First line is a configuration parameter. Meaning of fields in <M:WxH>: |
| 92 | M - picture mode. It can be either 's' for static pictures, |
| 93 | 'r' for rolling pictures, and 'f' for flashing pictures. |
| 94 | W - width of the picture. May be between 1 and 1792 |
| 95 | H - height of the picture. May be between 1 and 32 |
| 96 | |
| 97 | For example <s:128x32> means static picture, 128 pixels long and 32 pixels high. |
| 98 | |
| 99 | The physical size of the display is 128x32 pixels. Static and flashing pictures |
| 100 | can't be larger than that (actually they can, but only part of them will be displayed ;) ) |
| 101 | |
| 102 | If the picture is smaller than 128x32 it will be centered. Rolling pictures wider than |
| 103 | 128 pixels will be centered too, unless their width = n*128. Vertically they will be |
| 104 | centered just like static pictures, if their height is smaller than 32. |
| 105 | |
| 106 | Flashing pictures will be centered horizontally if their width < 128, but they were |
| 107 | centered vertically in a different way. If their height < 16, they will be centered |
| 108 | in the upper half of the display (rows 0-15). This is because only the first half |
| 109 | of flashing pictures is used for flashing. When the picture with heigh = 32 is |
| 110 | displayed in flashing mode, its upper 16 rows will be flashing in the upper half |
| 111 | of the display, and the lower half will be empty. After few seconds upper part will |
| 112 | stop flashing (but that part of the picture will remain there), and the lower |
| 113 | half of the display will start displayin the lower half of the picture |
| 114 | in rolling mode, unless it is empty, or the picture was small enough to fit in |
| 115 | upper part. It is not mine idea, this is just the way Asus' display work ;) |
| 116 | So if you need just flashing, use at most 128x16 picture. If you need flashing and |
| 117 | rolling, use whole size of the display. |
| 118 | |
| 119 | Lines following the first, configuration, line are picture data. Each '1' means |
| 120 | that the pixel is lit, and '0' means that it is not. You can also use '#' as ON, |
| 121 | and ' ' (space) as OFF. Empty lines and all other characters are ignored. |
| 122 | |
| 123 | It is possible to write everything in one line <M:WxH>01010101010101010..., |
| 124 | and W*H characters will be used. If there is not enough characters, nothing will be |
| 125 | displayed. However, the 'line mode' is easier to read (and write), and it also |
| 126 | lets to omit parts of data. Whenever End-Of-Line character is found, but |
| 127 | the line is not W characters long, it is assumed that all missing characters |
| 128 | are equal to the last character in the line. |
| 129 | |
| 130 | Following line represents '0', '1' and a lots of '0's, dependng on the width of the picture |
| 131 | provided in configuration data: |
| 132 | 010 |
| 133 | |
| 134 | So if you need empty line, it is sufficient to write line with only one '0' in it. |
| 135 | The same works with '1' (or ' ' and '#'). |
| 136 | |
| 137 | If there are too many data in the file, they will be ignored. If you are not sure |
| 138 | how many characters you are missing, you can add few lines with one zero in each of them. |
| 139 | |
| 140 | There are some example pictures in .txt format, that can be used as follows: |
| 141 | cat foo.txt > /sys/class/asus_oled/oled_1/picture |
| 142 | |
| 143 | If the display is switched off you also need to run: |
| 144 | echo 1 > /sys/class/asus_oled/oled_1/enabled |
| 145 | To switch it off, just use: |
| 146 | echo 0 > /sys/class/asus_oled/oled_1/enabled |
| 147 | |
| 148 | |
| 149 | ******* |
| 150 | |
| 151 | For any additional info please have a look at http://lapsus.berlios.de/asus_oled.html |
| 152 | |
| 153 | |
| 154 | |
| 155 | Jakub Schmidtke (sjakub@gmail.com) |
| 156 | |