blob: 92ba0902d107254725cbb0b6c230b2e1acbc57f4 [file] [log] [blame]
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2500pci
23 Abstract: Data structures and registers for the rt2500pci module.
24 Supported chipsets: RT2560.
25 */
26
27#ifndef RT2500PCI_H
28#define RT2500PCI_H
29
30/*
31 * RF chip defines.
32 */
33#define RF2522 0x0000
34#define RF2523 0x0001
35#define RF2524 0x0002
36#define RF2525 0x0003
37#define RF2525E 0x0004
38#define RF5222 0x0010
39
40/*
41 * RT2560 version
42 */
43#define RT2560_VERSION_B 2
44#define RT2560_VERSION_C 3
45#define RT2560_VERSION_D 4
46
47/*
48 * Signal information.
49 * Defaul offset is required for RSSI <-> dBm conversion.
50 */
51#define MAX_SIGNAL 100
52#define MAX_RX_SSI -1
53#define DEFAULT_RSSI_OFFSET 121
54
55/*
56 * Register layout information.
57 */
58#define CSR_REG_BASE 0x0000
59#define CSR_REG_SIZE 0x0174
60#define EEPROM_BASE 0x0000
61#define EEPROM_SIZE 0x0200
62#define BBP_SIZE 0x0040
63#define RF_SIZE 0x0014
64
65/*
66 * Control/Status Registers(CSR).
67 * Some values are set in TU, whereas 1 TU == 1024 us.
68 */
69
70/*
71 * CSR0: ASIC revision number.
72 */
73#define CSR0 0x0000
74
75/*
76 * CSR1: System control register.
77 * SOFT_RESET: Software reset, 1: reset, 0: normal.
78 * BBP_RESET: Hardware reset, 1: reset, 0, release.
79 * HOST_READY: Host ready after initialization.
80 */
81#define CSR1 0x0004
82#define CSR1_SOFT_RESET FIELD32(0x00000001)
83#define CSR1_BBP_RESET FIELD32(0x00000002)
84#define CSR1_HOST_READY FIELD32(0x00000004)
85
86/*
87 * CSR2: System admin status register (invalid).
88 */
89#define CSR2 0x0008
90
91/*
92 * CSR3: STA MAC address register 0.
93 */
94#define CSR3 0x000c
95#define CSR3_BYTE0 FIELD32(0x000000ff)
96#define CSR3_BYTE1 FIELD32(0x0000ff00)
97#define CSR3_BYTE2 FIELD32(0x00ff0000)
98#define CSR3_BYTE3 FIELD32(0xff000000)
99
100/*
101 * CSR4: STA MAC address register 1.
102 */
103#define CSR4 0x0010
104#define CSR4_BYTE4 FIELD32(0x000000ff)
105#define CSR4_BYTE5 FIELD32(0x0000ff00)
106
107/*
108 * CSR5: BSSID register 0.
109 */
110#define CSR5 0x0014
111#define CSR5_BYTE0 FIELD32(0x000000ff)
112#define CSR5_BYTE1 FIELD32(0x0000ff00)
113#define CSR5_BYTE2 FIELD32(0x00ff0000)
114#define CSR5_BYTE3 FIELD32(0xff000000)
115
116/*
117 * CSR6: BSSID register 1.
118 */
119#define CSR6 0x0018
120#define CSR6_BYTE4 FIELD32(0x000000ff)
121#define CSR6_BYTE5 FIELD32(0x0000ff00)
122
123/*
124 * CSR7: Interrupt source register.
125 * Write 1 to clear.
126 * TBCN_EXPIRE: Beacon timer expired interrupt.
127 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
128 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
129 * TXDONE_TXRING: Tx ring transmit done interrupt.
130 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
131 * TXDONE_PRIORING: Priority ring transmit done interrupt.
132 * RXDONE: Receive done interrupt.
133 * DECRYPTION_DONE: Decryption done interrupt.
134 * ENCRYPTION_DONE: Encryption done interrupt.
135 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
136 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
137 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
138 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
139 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
140 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
141 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
142 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
143 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
144 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
145 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
146
147 */
148#define CSR7 0x001c
149#define CSR7_TBCN_EXPIRE FIELD32(0x00000001)
150#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002)
151#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004)
152#define CSR7_TXDONE_TXRING FIELD32(0x00000008)
153#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010)
154#define CSR7_TXDONE_PRIORING FIELD32(0x00000020)
155#define CSR7_RXDONE FIELD32(0x00000040)
156#define CSR7_DECRYPTION_DONE FIELD32(0x00000080)
157#define CSR7_ENCRYPTION_DONE FIELD32(0x00000100)
158#define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200)
159#define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400)
160#define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
161#define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
162#define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
163#define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000)
164#define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000)
165#define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
166#define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
167#define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
168#define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
169
170/*
171 * CSR8: Interrupt mask register.
172 * Write 1 to mask interrupt.
173 * TBCN_EXPIRE: Beacon timer expired interrupt.
174 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
175 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
176 * TXDONE_TXRING: Tx ring transmit done interrupt.
177 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
178 * TXDONE_PRIORING: Priority ring transmit done interrupt.
179 * RXDONE: Receive done interrupt.
180 * DECRYPTION_DONE: Decryption done interrupt.
181 * ENCRYPTION_DONE: Encryption done interrupt.
182 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
183 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
184 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
185 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
186 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
187 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
188 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
189 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
190 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
191 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
192 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
193 */
194#define CSR8 0x0020
195#define CSR8_TBCN_EXPIRE FIELD32(0x00000001)
196#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002)
197#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004)
198#define CSR8_TXDONE_TXRING FIELD32(0x00000008)
199#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010)
200#define CSR8_TXDONE_PRIORING FIELD32(0x00000020)
201#define CSR8_RXDONE FIELD32(0x00000040)
202#define CSR8_DECRYPTION_DONE FIELD32(0x00000080)
203#define CSR8_ENCRYPTION_DONE FIELD32(0x00000100)
204#define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200)
205#define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400)
206#define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
207#define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
208#define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
209#define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000)
210#define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000)
211#define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
212#define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
213#define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
214#define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
215
216/*
217 * CSR9: Maximum frame length register.
218 * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12.
219 */
220#define CSR9 0x0024
221#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80)
222
223/*
224 * SECCSR0: WEP control register.
225 * KICK_DECRYPT: Kick decryption engine, self-clear.
226 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
227 * DESC_ADDRESS: Descriptor physical address of frame.
228 */
229#define SECCSR0 0x0028
230#define SECCSR0_KICK_DECRYPT FIELD32(0x00000001)
231#define SECCSR0_ONE_SHOT FIELD32(0x00000002)
232#define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc)
233
234/*
235 * CSR11: Back-off control register.
236 * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
237 * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
238 * SLOT_TIME: Slot time, default is 20us for 802.11b
239 * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD.
240 * LONG_RETRY: Long retry count.
241 * SHORT_RETRY: Short retry count.
242 */
243#define CSR11 0x002c
244#define CSR11_CWMIN FIELD32(0x0000000f)
245#define CSR11_CWMAX FIELD32(0x000000f0)
246#define CSR11_SLOT_TIME FIELD32(0x00001f00)
247#define CSR11_CW_SELECT FIELD32(0x00002000)
248#define CSR11_LONG_RETRY FIELD32(0x00ff0000)
249#define CSR11_SHORT_RETRY FIELD32(0xff000000)
250
251/*
252 * CSR12: Synchronization configuration register 0.
253 * All units in 1/16 TU.
254 * BEACON_INTERVAL: Beacon interval, default is 100 TU.
255 * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU.
256 */
257#define CSR12 0x0030
258#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff)
259#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000)
260
261/*
262 * CSR13: Synchronization configuration register 1.
263 * All units in 1/16 TU.
264 * ATIMW_DURATION: Atim window duration.
265 * CFP_PERIOD: Cfp period, default is 0 TU.
266 */
267#define CSR13 0x0034
268#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff)
269#define CSR13_CFP_PERIOD FIELD32(0x00ff0000)
270
271/*
272 * CSR14: Synchronization control register.
273 * TSF_COUNT: Enable tsf auto counting.
274 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
275 * TBCN: Enable tbcn with reload value.
276 * TCFP: Enable tcfp & cfp / cp switching.
277 * TATIMW: Enable tatimw & atim window switching.
278 * BEACON_GEN: Enable beacon generator.
279 * CFP_COUNT_PRELOAD: Cfp count preload value.
280 * TBCM_PRELOAD: Tbcn preload value in units of 64us.
281 */
282#define CSR14 0x0038
283#define CSR14_TSF_COUNT FIELD32(0x00000001)
284#define CSR14_TSF_SYNC FIELD32(0x00000006)
285#define CSR14_TBCN FIELD32(0x00000008)
286#define CSR14_TCFP FIELD32(0x00000010)
287#define CSR14_TATIMW FIELD32(0x00000020)
288#define CSR14_BEACON_GEN FIELD32(0x00000040)
289#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00)
290#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000)
291
292/*
293 * CSR15: Synchronization status register.
294 * CFP: ASIC is in contention-free period.
295 * ATIMW: ASIC is in ATIM window.
296 * BEACON_SENT: Beacon is send.
297 */
298#define CSR15 0x003c
299#define CSR15_CFP FIELD32(0x00000001)
300#define CSR15_ATIMW FIELD32(0x00000002)
301#define CSR15_BEACON_SENT FIELD32(0x00000004)
302
303/*
304 * CSR16: TSF timer register 0.
305 */
306#define CSR16 0x0040
307#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff)
308
309/*
310 * CSR17: TSF timer register 1.
311 */
312#define CSR17 0x0044
313#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff)
314
315/*
316 * CSR18: IFS timer register 0.
317 * SIFS: Sifs, default is 10 us.
318 * PIFS: Pifs, default is 30 us.
319 */
320#define CSR18 0x0048
321#define CSR18_SIFS FIELD32(0x000001ff)
322#define CSR18_PIFS FIELD32(0x001f0000)
323
324/*
325 * CSR19: IFS timer register 1.
326 * DIFS: Difs, default is 50 us.
327 * EIFS: Eifs, default is 364 us.
328 */
329#define CSR19 0x004c
330#define CSR19_DIFS FIELD32(0x0000ffff)
331#define CSR19_EIFS FIELD32(0xffff0000)
332
333/*
334 * CSR20: Wakeup timer register.
335 * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU.
336 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
337 * AUTOWAKE: Enable auto wakeup / sleep mechanism.
338 */
339#define CSR20 0x0050
340#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff)
341#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000)
342#define CSR20_AUTOWAKE FIELD32(0x01000000)
343
344/*
345 * CSR21: EEPROM control register.
346 * RELOAD: Write 1 to reload eeprom content.
347 * TYPE_93C46: 1: 93c46, 0:93c66.
348 */
349#define CSR21 0x0054
350#define CSR21_RELOAD FIELD32(0x00000001)
351#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002)
352#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004)
353#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008)
354#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010)
355#define CSR21_TYPE_93C46 FIELD32(0x00000020)
356
357/*
358 * CSR22: CFP control register.
359 * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU.
360 * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain.
361 */
362#define CSR22 0x0058
363#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff)
364#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000)
365
366/*
367 * Transmit related CSRs.
368 * Some values are set in TU, whereas 1 TU == 1024 us.
369 */
370
371/*
372 * TXCSR0: TX Control Register.
373 * KICK_TX: Kick tx ring.
374 * KICK_ATIM: Kick atim ring.
375 * KICK_PRIO: Kick priority ring.
376 * ABORT: Abort all transmit related ring operation.
377 */
378#define TXCSR0 0x0060
379#define TXCSR0_KICK_TX FIELD32(0x00000001)
380#define TXCSR0_KICK_ATIM FIELD32(0x00000002)
381#define TXCSR0_KICK_PRIO FIELD32(0x00000004)
382#define TXCSR0_ABORT FIELD32(0x00000008)
383
384/*
385 * TXCSR1: TX Configuration Register.
386 * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps.
387 * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps.
388 * TSF_OFFSET: Insert tsf offset.
389 * AUTORESPONDER: Enable auto responder which include ack & cts.
390 */
391#define TXCSR1 0x0064
392#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff)
393#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00)
394#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000)
395#define TXCSR1_AUTORESPONDER FIELD32(0x01000000)
396
397/*
398 * TXCSR2: Tx descriptor configuration register.
399 * TXD_SIZE: Tx descriptor size, default is 48.
400 * NUM_TXD: Number of tx entries in ring.
401 * NUM_ATIM: Number of atim entries in ring.
402 * NUM_PRIO: Number of priority entries in ring.
403 */
404#define TXCSR2 0x0068
405#define TXCSR2_TXD_SIZE FIELD32(0x000000ff)
406#define TXCSR2_NUM_TXD FIELD32(0x0000ff00)
407#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000)
408#define TXCSR2_NUM_PRIO FIELD32(0xff000000)
409
410/*
411 * TXCSR3: TX Ring Base address register.
412 */
413#define TXCSR3 0x006c
414#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff)
415
416/*
417 * TXCSR4: TX Atim Ring Base address register.
418 */
419#define TXCSR4 0x0070
420#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff)
421
422/*
423 * TXCSR5: TX Prio Ring Base address register.
424 */
425#define TXCSR5 0x0074
426#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff)
427
428/*
429 * TXCSR6: Beacon Base address register.
430 */
431#define TXCSR6 0x0078
432#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff)
433
434/*
435 * TXCSR7: Auto responder control register.
436 * AR_POWERMANAGEMENT: Auto responder power management bit.
437 */
438#define TXCSR7 0x007c
439#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001)
440
441/*
442 * TXCSR8: CCK Tx BBP register.
443 */
444#define TXCSR8 0x0098
445#define TXCSR8_BBP_ID0 FIELD32(0x0000007f)
446#define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080)
447#define TXCSR8_BBP_ID1 FIELD32(0x00007f00)
448#define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000)
449#define TXCSR8_BBP_ID2 FIELD32(0x007f0000)
450#define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000)
451#define TXCSR8_BBP_ID3 FIELD32(0x7f000000)
452#define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000)
453
454/*
455 * TXCSR9: OFDM TX BBP registers
456 * OFDM_SIGNAL: BBP rate field address for OFDM.
457 * OFDM_SERVICE: BBP service field address for OFDM.
458 * OFDM_LENGTH_LOW: BBP length low byte address for OFDM.
459 * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM.
460 */
461#define TXCSR9 0x0094
462#define TXCSR9_OFDM_RATE FIELD32(0x000000ff)
463#define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00)
464#define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000)
465#define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000)
466
467/*
468 * Receive related CSRs.
469 * Some values are set in TU, whereas 1 TU == 1024 us.
470 */
471
472/*
473 * RXCSR0: RX Control Register.
474 * DISABLE_RX: Disable rx engine.
475 * DROP_CRC: Drop crc error.
476 * DROP_PHYSICAL: Drop physical error.
477 * DROP_CONTROL: Drop control frame.
478 * DROP_NOT_TO_ME: Drop not to me unicast frame.
479 * DROP_TODS: Drop frame tods bit is true.
480 * DROP_VERSION_ERROR: Drop version error frame.
481 * PASS_CRC: Pass all packets with crc attached.
482 * PASS_CRC: Pass all packets with crc attached.
483 * PASS_PLCP: Pass all packets with 4 bytes PLCP attached.
484 * DROP_MCAST: Drop multicast frames.
485 * DROP_BCAST: Drop broadcast frames.
486 * ENABLE_QOS: Accept QOS data frame and parse QOS field.
487 */
488#define RXCSR0 0x0080
489#define RXCSR0_DISABLE_RX FIELD32(0x00000001)
490#define RXCSR0_DROP_CRC FIELD32(0x00000002)
491#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004)
492#define RXCSR0_DROP_CONTROL FIELD32(0x00000008)
493#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010)
494#define RXCSR0_DROP_TODS FIELD32(0x00000020)
495#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040)
496#define RXCSR0_PASS_CRC FIELD32(0x00000080)
497#define RXCSR0_PASS_PLCP FIELD32(0x00000100)
498#define RXCSR0_DROP_MCAST FIELD32(0x00000200)
499#define RXCSR0_DROP_BCAST FIELD32(0x00000400)
500#define RXCSR0_ENABLE_QOS FIELD32(0x00000800)
501
502/*
503 * RXCSR1: RX descriptor configuration register.
504 * RXD_SIZE: Rx descriptor size, default is 32b.
505 * NUM_RXD: Number of rx entries in ring.
506 */
507#define RXCSR1 0x0084
508#define RXCSR1_RXD_SIZE FIELD32(0x000000ff)
509#define RXCSR1_NUM_RXD FIELD32(0x0000ff00)
510
511/*
512 * RXCSR2: RX Ring base address register.
513 */
514#define RXCSR2 0x0088
515#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff)
516
517/*
518 * RXCSR3: BBP ID register for Rx operation.
519 * BBP_ID#: BBP register # id.
520 * BBP_ID#_VALID: BBP register # id is valid or not.
521 */
522#define RXCSR3 0x0090
523#define RXCSR3_BBP_ID0 FIELD32(0x0000007f)
524#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080)
525#define RXCSR3_BBP_ID1 FIELD32(0x00007f00)
526#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000)
527#define RXCSR3_BBP_ID2 FIELD32(0x007f0000)
528#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000)
529#define RXCSR3_BBP_ID3 FIELD32(0x7f000000)
530#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000)
531
532/*
533 * ARCSR1: Auto Responder PLCP config register 1.
534 * AR_BBP_DATA#: Auto responder BBP register # data.
535 * AR_BBP_ID#: Auto responder BBP register # Id.
536 */
537#define ARCSR1 0x009c
538#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff)
539#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00)
540#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000)
541#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000)
542
543/*
544 * Miscellaneous Registers.
545 * Some values are set in TU, whereas 1 TU == 1024 us.
546
547 */
548
549/*
550 * PCICSR: PCI control register.
551 * BIG_ENDIAN: 1: big endian, 0: little endian.
552 * RX_TRESHOLD: Rx threshold in dw to start pci access
553 * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw.
554 * TX_TRESHOLD: Tx threshold in dw to start pci access
555 * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward.
556 * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw.
557 * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
558 * READ_MULTIPLE: Enable memory read multiple.
559 * WRITE_INVALID: Enable memory write & invalid.
560 */
561#define PCICSR 0x008c
562#define PCICSR_BIG_ENDIAN FIELD32(0x00000001)
563#define PCICSR_RX_TRESHOLD FIELD32(0x00000006)
564#define PCICSR_TX_TRESHOLD FIELD32(0x00000018)
565#define PCICSR_BURST_LENTH FIELD32(0x00000060)
566#define PCICSR_ENABLE_CLK FIELD32(0x00000080)
567#define PCICSR_READ_MULTIPLE FIELD32(0x00000100)
568#define PCICSR_WRITE_INVALID FIELD32(0x00000200)
569
570/*
571 * CNT0: FCS error count.
572 * FCS_ERROR: FCS error count, cleared when read.
573 */
574#define CNT0 0x00a0
575#define CNT0_FCS_ERROR FIELD32(0x0000ffff)
576
577/*
578 * Statistic Register.
579 * CNT1: PLCP error count.
580 * CNT2: Long error count.
581 */
582#define TIMECSR2 0x00a8
583#define CNT1 0x00ac
584#define CNT2 0x00b0
585#define TIMECSR3 0x00b4
586
587/*
588 * CNT3: CCA false alarm count.
589 */
590#define CNT3 0x00b8
591#define CNT3_FALSE_CCA FIELD32(0x0000ffff)
592
593/*
594 * Statistic Register.
595 * CNT4: Rx FIFO overflow count.
596 * CNT5: Tx FIFO underrun count.
597 */
598#define CNT4 0x00bc
599#define CNT5 0x00c0
600
601/*
602 * Baseband Control Register.
603 */
604
605/*
606 * PWRCSR0: Power mode configuration register.
607 */
608#define PWRCSR0 0x00c4
609
610/*
611 * Power state transition time registers.
612 */
613#define PSCSR0 0x00c8
614#define PSCSR1 0x00cc
615#define PSCSR2 0x00d0
616#define PSCSR3 0x00d4
617
618/*
619 * PWRCSR1: Manual power control / status register.
620 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
621 * SET_STATE: Set state. Write 1 to trigger, self cleared.
622 * BBP_DESIRE_STATE: BBP desired state.
623 * RF_DESIRE_STATE: RF desired state.
624 * BBP_CURR_STATE: BBP current state.
625 * RF_CURR_STATE: RF current state.
626 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
627 */
628#define PWRCSR1 0x00d8
629#define PWRCSR1_SET_STATE FIELD32(0x00000001)
630#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006)
631#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018)
632#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060)
633#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180)
634#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200)
635
636/*
637 * TIMECSR: Timer control register.
638 * US_COUNT: 1 us timer count in units of clock cycles.
639 * US_64_COUNT: 64 us timer count in units of 1 us timer.
640 * BEACON_EXPECT: Beacon expect window.
641 */
642#define TIMECSR 0x00dc
643#define TIMECSR_US_COUNT FIELD32(0x000000ff)
644#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00)
645#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000)
646
647/*
648 * MACCSR0: MAC configuration register 0.
649 */
650#define MACCSR0 0x00e0
651
652/*
653 * MACCSR1: MAC configuration register 1.
654 * KICK_RX: Kick one-shot rx in one-shot rx mode.
655 * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
656 * BBPRX_RESET_MODE: Ralink bbp rx reset mode.
657 * AUTO_TXBBP: Auto tx logic access bbp control register.
658 * AUTO_RXBBP: Auto rx logic access bbp control register.
659 * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd.
660 * INTERSIL_IF: Intersil if calibration pin.
661 */
662#define MACCSR1 0x00e4
663#define MACCSR1_KICK_RX FIELD32(0x00000001)
664#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002)
665#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004)
666#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008)
667#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010)
668#define MACCSR1_LOOPBACK FIELD32(0x00000060)
669#define MACCSR1_INTERSIL_IF FIELD32(0x00000080)
670
671/*
672 * RALINKCSR: Ralink Rx auto-reset BBCR.
673 * AR_BBP_DATA#: Auto reset BBP register # data.
674 * AR_BBP_ID#: Auto reset BBP register # id.
675 */
676#define RALINKCSR 0x00e8
677#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff)
678#define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00)
679#define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000)
680#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000)
681#define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000)
682#define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000)
683
684/*
685 * BCNCSR: Beacon interval control register.
686 * CHANGE: Write one to change beacon interval.
687 * DELTATIME: The delta time value.
688 * NUM_BEACON: Number of beacon according to mode.
689 * MODE: Please refer to asic specs.
690 * PLUS: Plus or minus delta time value.
691 */
692#define BCNCSR 0x00ec
693#define BCNCSR_CHANGE FIELD32(0x00000001)
694#define BCNCSR_DELTATIME FIELD32(0x0000001e)
695#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0)
696#define BCNCSR_MODE FIELD32(0x00006000)
697#define BCNCSR_PLUS FIELD32(0x00008000)
698
699/*
700 * BBP / RF / IF Control Register.
701 */
702
703/*
704 * BBPCSR: BBP serial control register.
705 * VALUE: Register value to program into BBP.
706 * REGNUM: Selected BBP register.
707 * BUSY: 1: asic is busy execute BBP programming.
708 * WRITE_CONTROL: 1: write BBP, 0: read BBP.
709 */
710#define BBPCSR 0x00f0
711#define BBPCSR_VALUE FIELD32(0x000000ff)
712#define BBPCSR_REGNUM FIELD32(0x00007f00)
713#define BBPCSR_BUSY FIELD32(0x00008000)
714#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000)
715
716/*
717 * RFCSR: RF serial control register.
718 * VALUE: Register value + id to program into rf/if.
719 * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
720 * IF_SELECT: Chip to program: 0: rf, 1: if.
721 * PLL_LD: Rf pll_ld status.
722 * BUSY: 1: asic is busy execute rf programming.
723 */
724#define RFCSR 0x00f4
725#define RFCSR_VALUE FIELD32(0x00ffffff)
726#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000)
727#define RFCSR_IF_SELECT FIELD32(0x20000000)
728#define RFCSR_PLL_LD FIELD32(0x40000000)
729#define RFCSR_BUSY FIELD32(0x80000000)
730
731/*
732 * LEDCSR: LED control register.
733 * ON_PERIOD: On period, default 70ms.
734 * OFF_PERIOD: Off period, default 30ms.
735 * LINK: 0: linkoff, 1: linkup.
736 * ACTIVITY: 0: idle, 1: active.
737 * LINK_POLARITY: 0: active low, 1: active high.
738 * ACTIVITY_POLARITY: 0: active low, 1: active high.
739 * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF.
740 */
741#define LEDCSR 0x00f8
742#define LEDCSR_ON_PERIOD FIELD32(0x000000ff)
743#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00)
744#define LEDCSR_LINK FIELD32(0x00010000)
745#define LEDCSR_ACTIVITY FIELD32(0x00020000)
746#define LEDCSR_LINK_POLARITY FIELD32(0x00040000)
747#define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000)
748#define LEDCSR_LED_DEFAULT FIELD32(0x00100000)
749
750/*
751 * AES control register.
752 */
753#define SECCSR3 0x00fc
754
755/*
756 * ASIC pointer information.
757 * RXPTR: Current RX ring address.
758 * TXPTR: Current Tx ring address.
759 * PRIPTR: Current Priority ring address.
760 * ATIMPTR: Current ATIM ring address.
761 */
762#define RXPTR 0x0100
763#define TXPTR 0x0104
764#define PRIPTR 0x0108
765#define ATIMPTR 0x010c
766
767/*
768 * TXACKCSR0: TX ACK timeout.
769 */
770#define TXACKCSR0 0x0110
771
772/*
773 * ACK timeout count registers.
774 * ACKCNT0: TX ACK timeout count.
775 * ACKCNT1: RX ACK timeout count.
776 */
777#define ACKCNT0 0x0114
778#define ACKCNT1 0x0118
779
780/*
781 * GPIO and others.
782 */
783
784/*
785 * GPIOCSR: GPIO control register.
786 */
787#define GPIOCSR 0x0120
788#define GPIOCSR_BIT0 FIELD32(0x00000001)
789#define GPIOCSR_BIT1 FIELD32(0x00000002)
790#define GPIOCSR_BIT2 FIELD32(0x00000004)
791#define GPIOCSR_BIT3 FIELD32(0x00000008)
792#define GPIOCSR_BIT4 FIELD32(0x00000010)
793#define GPIOCSR_BIT5 FIELD32(0x00000020)
794#define GPIOCSR_BIT6 FIELD32(0x00000040)
795#define GPIOCSR_BIT7 FIELD32(0x00000080)
796#define GPIOCSR_DIR0 FIELD32(0x00000100)
797#define GPIOCSR_DIR1 FIELD32(0x00000200)
798#define GPIOCSR_DIR2 FIELD32(0x00000400)
799#define GPIOCSR_DIR3 FIELD32(0x00000800)
800#define GPIOCSR_DIR4 FIELD32(0x00001000)
801#define GPIOCSR_DIR5 FIELD32(0x00002000)
802#define GPIOCSR_DIR6 FIELD32(0x00004000)
803#define GPIOCSR_DIR7 FIELD32(0x00008000)
804
805/*
806 * FIFO pointer registers.
807 * FIFOCSR0: TX FIFO pointer.
808 * FIFOCSR1: RX FIFO pointer.
809 */
810#define FIFOCSR0 0x0128
811#define FIFOCSR1 0x012c
812
813/*
814 * BCNCSR1: Tx BEACON offset time control register.
815 * PRELOAD: Beacon timer offset in units of usec.
816 * BEACON_CWMIN: 2^CwMin.
817 */
818#define BCNCSR1 0x0130
819#define BCNCSR1_PRELOAD FIELD32(0x0000ffff)
820#define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000)
821
822/*
823 * MACCSR2: TX_PE to RX_PE turn-around time control register
824 * DELAY: RX_PE low width, in units of pci clock cycle.
825 */
826#define MACCSR2 0x0134
827#define MACCSR2_DELAY FIELD32(0x000000ff)
828
829/*
830 * TESTCSR: TEST mode selection register.
831 */
832#define TESTCSR 0x0138
833
834/*
835 * ARCSR2: 1 Mbps ACK/CTS PLCP.
836 */
837#define ARCSR2 0x013c
838#define ARCSR2_SIGNAL FIELD32(0x000000ff)
839#define ARCSR2_SERVICE FIELD32(0x0000ff00)
840#define ARCSR2_LENGTH FIELD32(0xffff0000)
841
842/*
843 * ARCSR3: 2 Mbps ACK/CTS PLCP.
844 */
845#define ARCSR3 0x0140
846#define ARCSR3_SIGNAL FIELD32(0x000000ff)
847#define ARCSR3_SERVICE FIELD32(0x0000ff00)
848#define ARCSR3_LENGTH FIELD32(0xffff0000)
849
850/*
851 * ARCSR4: 5.5 Mbps ACK/CTS PLCP.
852 */
853#define ARCSR4 0x0144
854#define ARCSR4_SIGNAL FIELD32(0x000000ff)
855#define ARCSR4_SERVICE FIELD32(0x0000ff00)
856#define ARCSR4_LENGTH FIELD32(0xffff0000)
857
858/*
859 * ARCSR5: 11 Mbps ACK/CTS PLCP.
860 */
861#define ARCSR5 0x0148
862#define ARCSR5_SIGNAL FIELD32(0x000000ff)
863#define ARCSR5_SERVICE FIELD32(0x0000ff00)
864#define ARCSR5_LENGTH FIELD32(0xffff0000)
865
866/*
867 * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps.
868 */
869#define ARTCSR0 0x014c
870#define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff)
871#define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00)
872#define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000)
873#define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000)
874
875
876/*
877 * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
878 */
879#define ARTCSR1 0x0150
880#define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff)
881#define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00)
882#define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000)
883#define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000)
884
885/*
886 * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
887 */
888#define ARTCSR2 0x0154
889#define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff)
890#define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00)
891#define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000)
892#define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000)
893
894/*
895 * SECCSR1_RT2509: WEP control register.
896 * KICK_ENCRYPT: Kick encryption engine, self-clear.
897 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
898 * DESC_ADDRESS: Descriptor physical address of frame.
899 */
900#define SECCSR1 0x0158
901#define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001)
902#define SECCSR1_ONE_SHOT FIELD32(0x00000002)
903#define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc)
904
905/*
906 * BBPCSR1: BBP TX configuration.
907 */
908#define BBPCSR1 0x015c
909#define BBPCSR1_CCK FIELD32(0x00000003)
910#define BBPCSR1_CCK_FLIP FIELD32(0x00000004)
911#define BBPCSR1_OFDM FIELD32(0x00030000)
912#define BBPCSR1_OFDM_FLIP FIELD32(0x00040000)
913
914/*
915 * Dual band configuration registers.
916 * DBANDCSR0: Dual band configuration register 0.
917 * DBANDCSR1: Dual band configuration register 1.
918 */
919#define DBANDCSR0 0x0160
920#define DBANDCSR1 0x0164
921
922/*
923 * BBPPCSR: BBP Pin control register.
924 */
925#define BBPPCSR 0x0168
926
927/*
928 * MAC special debug mode selection registers.
929 * DBGSEL0: MAC special debug mode selection register 0.
930 * DBGSEL1: MAC special debug mode selection register 1.
931 */
932#define DBGSEL0 0x016c
933#define DBGSEL1 0x0170
934
935/*
936 * BISTCSR: BBP BIST register.
937 */
938#define BISTCSR 0x0174
939
940/*
941 * Multicast filter registers.
942 * MCAST0: Multicast filter register 0.
943 * MCAST1: Multicast filter register 1.
944 */
945#define MCAST0 0x0178
946#define MCAST1 0x017c
947
948/*
949 * UART registers.
950 * UARTCSR0: UART1 TX register.
951 * UARTCSR1: UART1 RX register.
952 * UARTCSR3: UART1 frame control register.
953 * UARTCSR4: UART1 buffer control register.
954 * UART2CSR0: UART2 TX register.
955 * UART2CSR1: UART2 RX register.
956 * UART2CSR3: UART2 frame control register.
957 * UART2CSR4: UART2 buffer control register.
958 */
959#define UARTCSR0 0x0180
960#define UARTCSR1 0x0184
961#define UARTCSR3 0x0188
962#define UARTCSR4 0x018c
963#define UART2CSR0 0x0190
964#define UART2CSR1 0x0194
965#define UART2CSR3 0x0198
966#define UART2CSR4 0x019c
967
968/*
969 * BBP registers.
970 * The wordsize of the BBP is 8 bits.
971 */
972
973/*
974 * R2: TX antenna control
975 */
976#define BBP_R2_TX_ANTENNA FIELD8(0x03)
977#define BBP_R2_TX_IQ_FLIP FIELD8(0x04)
978
979/*
980 * R14: RX antenna control
981 */
982#define BBP_R14_RX_ANTENNA FIELD8(0x03)
983#define BBP_R14_RX_IQ_FLIP FIELD8(0x04)
984
985/*
986 * BBP_R70
987 */
988#define BBP_R70_JAPAN_FILTER FIELD8(0x08)
989
990/*
991 * RF registers
992 */
993
994/*
995 * RF 1
996 */
997#define RF1_TUNER FIELD32(0x00020000)
998
999/*
1000 * RF 3
1001 */
1002#define RF3_TUNER FIELD32(0x00000100)
1003#define RF3_TXPOWER FIELD32(0x00003e00)
1004
1005/*
1006 * EEPROM content.
1007 * The wordsize of the EEPROM is 16 bits.
1008 */
1009
1010/*
1011 * HW MAC address.
1012 */
1013#define EEPROM_MAC_ADDR_0 0x0002
1014#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1015#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1016#define EEPROM_MAC_ADDR1 0x0003
1017#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1018#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1019#define EEPROM_MAC_ADDR_2 0x0004
1020#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1021#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1022
1023/*
1024 * EEPROM antenna.
1025 * ANTENNA_NUM: Number of antenna's.
1026 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1027 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1028 * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd.
1029 * DYN_TXAGC: Dynamic TX AGC control.
1030 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1031 * RF_TYPE: Rf_type of this adapter.
1032 */
1033#define EEPROM_ANTENNA 0x10
1034#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1035#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1036#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1037#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0)
1038#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1039#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1040#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1041
1042/*
1043 * EEPROM NIC config.
1044 * CARDBUS_ACCEL: 0: enable, 1: disable.
1045 * DYN_BBP_TUNE: 0: enable, 1: disable.
1046 * CCK_TX_POWER: CCK TX power compensation.
1047 */
1048#define EEPROM_NIC 0x11
1049#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001)
1050#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002)
1051#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c)
1052
1053/*
1054 * EEPROM geography.
1055 * GEO: Default geography setting for device.
1056 */
1057#define EEPROM_GEOGRAPHY 0x12
1058#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00)
1059
1060/*
1061 * EEPROM BBP.
1062 */
1063#define EEPROM_BBP_START 0x13
1064#define EEPROM_BBP_SIZE 16
1065#define EEPROM_BBP_VALUE FIELD16(0x00ff)
1066#define EEPROM_BBP_REG_ID FIELD16(0xff00)
1067
1068/*
1069 * EEPROM TXPOWER
1070 */
1071#define EEPROM_TXPOWER_START 0x23
1072#define EEPROM_TXPOWER_SIZE 7
1073#define EEPROM_TXPOWER_1 FIELD16(0x00ff)
1074#define EEPROM_TXPOWER_2 FIELD16(0xff00)
1075
1076/*
1077 * RSSI <-> dBm offset calibration
1078 */
1079#define EEPROM_CALIBRATE_OFFSET 0x3e
1080#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff)
1081
1082/*
1083 * DMA descriptor defines.
1084 */
Ivo van Doorn4bd7c452008-01-24 00:48:03 -08001085#define TXD_DESC_SIZE ( 11 * sizeof(__le32) )
1086#define RXD_DESC_SIZE ( 11 * sizeof(__le32) )
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001087
1088/*
1089 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
1090 */
1091
1092/*
1093 * Word0
1094 */
1095#define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1096#define TXD_W0_VALID FIELD32(0x00000002)
1097#define TXD_W0_RESULT FIELD32(0x0000001c)
1098#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0)
1099#define TXD_W0_MORE_FRAG FIELD32(0x00000100)
1100#define TXD_W0_ACK FIELD32(0x00000200)
1101#define TXD_W0_TIMESTAMP FIELD32(0x00000400)
1102#define TXD_W0_OFDM FIELD32(0x00000800)
1103#define TXD_W0_CIPHER_OWNER FIELD32(0x00001000)
1104#define TXD_W0_IFS FIELD32(0x00006000)
1105#define TXD_W0_RETRY_MODE FIELD32(0x00008000)
1106#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1107#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1108
1109/*
1110 * Word1
1111 */
1112#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1113
1114/*
1115 * Word2
1116 */
1117#define TXD_W2_IV_OFFSET FIELD32(0x0000003f)
1118#define TXD_W2_AIFS FIELD32(0x000000c0)
1119#define TXD_W2_CWMIN FIELD32(0x00000f00)
1120#define TXD_W2_CWMAX FIELD32(0x0000f000)
1121
1122/*
1123 * Word3: PLCP information
1124 */
1125#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff)
1126#define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00)
1127#define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1128#define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1129
1130/*
1131 * Word4
1132 */
1133#define TXD_W4_IV FIELD32(0xffffffff)
1134
1135/*
1136 * Word5
1137 */
1138#define TXD_W5_EIV FIELD32(0xffffffff)
1139
1140/*
1141 * Word6-9: Key
1142 */
1143#define TXD_W6_KEY FIELD32(0xffffffff)
1144#define TXD_W7_KEY FIELD32(0xffffffff)
1145#define TXD_W8_KEY FIELD32(0xffffffff)
1146#define TXD_W9_KEY FIELD32(0xffffffff)
1147
1148/*
1149 * Word10
1150 */
1151#define TXD_W10_RTS FIELD32(0x00000001)
1152#define TXD_W10_TX_RATE FIELD32(0x000000fe)
1153
1154/*
1155 * RX descriptor format for RX Ring.
1156 */
1157
1158/*
1159 * Word0
1160 */
1161#define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1162#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
1163#define RXD_W0_MULTICAST FIELD32(0x00000004)
1164#define RXD_W0_BROADCAST FIELD32(0x00000008)
1165#define RXD_W0_MY_BSS FIELD32(0x00000010)
1166#define RXD_W0_CRC_ERROR FIELD32(0x00000020)
1167#define RXD_W0_OFDM FIELD32(0x00000040)
1168#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
1169#define RXD_W0_CIPHER_OWNER FIELD32(0x00000100)
1170#define RXD_W0_ICV_ERROR FIELD32(0x00000200)
1171#define RXD_W0_IV_OFFSET FIELD32(0x0000fc00)
1172#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1173#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1174
1175/*
1176 * Word1
1177 */
1178#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1179
1180/*
1181 * Word2
1182 */
1183#define RXD_W2_SIGNAL FIELD32(0x000000ff)
1184#define RXD_W2_RSSI FIELD32(0x0000ff00)
1185#define RXD_W2_TA FIELD32(0xffff0000)
1186
1187/*
1188 * Word3
1189 */
1190#define RXD_W3_TA FIELD32(0xffffffff)
1191
1192/*
1193 * Word4
1194 */
1195#define RXD_W4_IV FIELD32(0xffffffff)
1196
1197/*
1198 * Word5
1199 */
1200#define RXD_W5_EIV FIELD32(0xffffffff)
1201
1202/*
1203 * Word6-9: Key
1204 */
1205#define RXD_W6_KEY FIELD32(0xffffffff)
1206#define RXD_W7_KEY FIELD32(0xffffffff)
1207#define RXD_W8_KEY FIELD32(0xffffffff)
1208#define RXD_W9_KEY FIELD32(0xffffffff)
1209
1210/*
1211 * Word10
1212 */
1213#define RXD_W10_DROP FIELD32(0x00000001)
1214
1215/*
1216 * Macro's for converting txpower from EEPROM to dscape value
1217 * and from dscape value to register value.
1218 */
1219#define MIN_TXPOWER 0
1220#define MAX_TXPOWER 31
1221#define DEFAULT_TXPOWER 24
1222
1223#define TXPOWER_FROM_DEV(__txpower) \
1224({ \
1225 ((__txpower) > MAX_TXPOWER) ? \
1226 DEFAULT_TXPOWER : (__txpower); \
1227})
1228
1229#define TXPOWER_TO_DEV(__txpower) \
1230({ \
1231 ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
1232 (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
1233 (__txpower)); \
1234})
1235
1236#endif /* RT2500PCI_H */