Guennadi Liakhovetski | aec11e5 | 2010-03-29 04:45:22 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM) |
| 3 | * |
| 4 | * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/i2c.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/platform_device.h> |
Randy Dunlap | 1db2c22 | 2010-05-20 18:08:23 -0300 | [diff] [blame] | 14 | #include <linux/slab.h> |
Guennadi Liakhovetski | aec11e5 | 2010-03-29 04:45:22 -0300 | [diff] [blame] | 15 | #include <linux/videodev2.h> |
| 16 | |
| 17 | #include <media/ak881x.h> |
| 18 | #include <media/v4l2-chip-ident.h> |
| 19 | #include <media/v4l2-common.h> |
| 20 | #include <media/v4l2-device.h> |
| 21 | |
| 22 | #define AK881X_INTERFACE_MODE 0 |
| 23 | #define AK881X_VIDEO_PROCESS1 1 |
| 24 | #define AK881X_VIDEO_PROCESS2 2 |
| 25 | #define AK881X_VIDEO_PROCESS3 3 |
| 26 | #define AK881X_DAC_MODE 5 |
| 27 | #define AK881X_STATUS 0x24 |
| 28 | #define AK881X_DEVICE_ID 0x25 |
| 29 | #define AK881X_DEVICE_REVISION 0x26 |
| 30 | |
| 31 | struct ak881x { |
| 32 | struct v4l2_subdev subdev; |
| 33 | struct ak881x_pdata *pdata; |
| 34 | unsigned int lines; |
| 35 | int id; /* DEVICE_ID code V4L2_IDENT_AK881X code from v4l2-chip-ident.h */ |
| 36 | char revision; /* DEVICE_REVISION content */ |
| 37 | }; |
| 38 | |
| 39 | static int reg_read(struct i2c_client *client, const u8 reg) |
| 40 | { |
| 41 | return i2c_smbus_read_byte_data(client, reg); |
| 42 | } |
| 43 | |
| 44 | static int reg_write(struct i2c_client *client, const u8 reg, |
| 45 | const u8 data) |
| 46 | { |
| 47 | return i2c_smbus_write_byte_data(client, reg, data); |
| 48 | } |
| 49 | |
| 50 | static int reg_set(struct i2c_client *client, const u8 reg, |
| 51 | const u8 data, u8 mask) |
| 52 | { |
| 53 | int ret = reg_read(client, reg); |
| 54 | if (ret < 0) |
| 55 | return ret; |
| 56 | return reg_write(client, reg, (ret & ~mask) | (data & mask)); |
| 57 | } |
| 58 | |
| 59 | static struct ak881x *to_ak881x(const struct i2c_client *client) |
| 60 | { |
| 61 | return container_of(i2c_get_clientdata(client), struct ak881x, subdev); |
| 62 | } |
| 63 | |
| 64 | static int ak881x_g_chip_ident(struct v4l2_subdev *sd, |
| 65 | struct v4l2_dbg_chip_ident *id) |
| 66 | { |
| 67 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 68 | struct ak881x *ak881x = to_ak881x(client); |
| 69 | |
| 70 | if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) |
| 71 | return -EINVAL; |
| 72 | |
| 73 | if (id->match.addr != client->addr) |
| 74 | return -ENODEV; |
| 75 | |
| 76 | id->ident = ak881x->id; |
| 77 | id->revision = ak881x->revision; |
| 78 | |
| 79 | return 0; |
| 80 | } |
| 81 | |
| 82 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 83 | static int ak881x_g_register(struct v4l2_subdev *sd, |
| 84 | struct v4l2_dbg_register *reg) |
| 85 | { |
| 86 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 87 | |
| 88 | if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) |
| 89 | return -EINVAL; |
| 90 | |
| 91 | if (reg->match.addr != client->addr) |
| 92 | return -ENODEV; |
| 93 | |
| 94 | reg->val = reg_read(client, reg->reg); |
| 95 | |
| 96 | if (reg->val > 0xffff) |
| 97 | return -EIO; |
| 98 | |
| 99 | return 0; |
| 100 | } |
| 101 | |
| 102 | static int ak881x_s_register(struct v4l2_subdev *sd, |
| 103 | struct v4l2_dbg_register *reg) |
| 104 | { |
| 105 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 106 | |
| 107 | if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) |
| 108 | return -EINVAL; |
| 109 | |
| 110 | if (reg->match.addr != client->addr) |
| 111 | return -ENODEV; |
| 112 | |
| 113 | if (reg_write(client, reg->reg, reg->val) < 0) |
| 114 | return -EIO; |
| 115 | |
| 116 | return 0; |
| 117 | } |
| 118 | #endif |
| 119 | |
| 120 | static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd, |
| 121 | struct v4l2_mbus_framefmt *mf) |
| 122 | { |
| 123 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 124 | struct ak881x *ak881x = to_ak881x(client); |
| 125 | |
| 126 | v4l_bound_align_image(&mf->width, 0, 720, 2, |
| 127 | &mf->height, 0, ak881x->lines, 1, 0); |
| 128 | mf->field = V4L2_FIELD_INTERLACED; |
Guennadi Liakhovetski | ace6e97 | 2010-07-22 16:52:51 -0300 | [diff] [blame] | 129 | mf->code = V4L2_MBUS_FMT_YUYV8_2X8; |
Guennadi Liakhovetski | aec11e5 | 2010-03-29 04:45:22 -0300 | [diff] [blame] | 130 | mf->colorspace = V4L2_COLORSPACE_SMPTE170M; |
| 131 | |
| 132 | return 0; |
| 133 | } |
| 134 | |
| 135 | static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd, |
| 136 | struct v4l2_mbus_framefmt *mf) |
| 137 | { |
| 138 | if (mf->field != V4L2_FIELD_INTERLACED || |
Guennadi Liakhovetski | ace6e97 | 2010-07-22 16:52:51 -0300 | [diff] [blame] | 139 | mf->code != V4L2_MBUS_FMT_YUYV8_2X8) |
Guennadi Liakhovetski | aec11e5 | 2010-03-29 04:45:22 -0300 | [diff] [blame] | 140 | return -EINVAL; |
| 141 | |
| 142 | return ak881x_try_g_mbus_fmt(sd, mf); |
| 143 | } |
| 144 | |
Hans Verkuil | 3805f20 | 2010-05-08 17:55:00 -0300 | [diff] [blame] | 145 | static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, |
Guennadi Liakhovetski | aec11e5 | 2010-03-29 04:45:22 -0300 | [diff] [blame] | 146 | enum v4l2_mbus_pixelcode *code) |
| 147 | { |
| 148 | if (index) |
| 149 | return -EINVAL; |
| 150 | |
Guennadi Liakhovetski | ace6e97 | 2010-07-22 16:52:51 -0300 | [diff] [blame] | 151 | *code = V4L2_MBUS_FMT_YUYV8_2X8; |
Guennadi Liakhovetski | aec11e5 | 2010-03-29 04:45:22 -0300 | [diff] [blame] | 152 | return 0; |
| 153 | } |
| 154 | |
| 155 | static int ak881x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) |
| 156 | { |
| 157 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 158 | struct ak881x *ak881x = to_ak881x(client); |
| 159 | |
| 160 | a->bounds.left = 0; |
| 161 | a->bounds.top = 0; |
| 162 | a->bounds.width = 720; |
| 163 | a->bounds.height = ak881x->lines; |
| 164 | a->defrect = a->bounds; |
| 165 | a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; |
| 166 | a->pixelaspect.numerator = 1; |
| 167 | a->pixelaspect.denominator = 1; |
| 168 | |
| 169 | return 0; |
| 170 | } |
| 171 | |
| 172 | static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) |
| 173 | { |
| 174 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 175 | struct ak881x *ak881x = to_ak881x(client); |
| 176 | u8 vp1; |
| 177 | |
| 178 | if (std == V4L2_STD_NTSC_443) { |
| 179 | vp1 = 3; |
| 180 | ak881x->lines = 480; |
| 181 | } else if (std == V4L2_STD_PAL_M) { |
| 182 | vp1 = 5; |
| 183 | ak881x->lines = 480; |
| 184 | } else if (std == V4L2_STD_PAL_60) { |
| 185 | vp1 = 7; |
| 186 | ak881x->lines = 480; |
| 187 | } else if (std && !(std & ~V4L2_STD_PAL)) { |
| 188 | vp1 = 0xf; |
| 189 | ak881x->lines = 576; |
| 190 | } else if (std && !(std & ~V4L2_STD_NTSC)) { |
| 191 | vp1 = 0; |
| 192 | ak881x->lines = 480; |
| 193 | } else { |
| 194 | /* No SECAM or PAL_N/Nc supported */ |
| 195 | return -EINVAL; |
| 196 | } |
| 197 | |
| 198 | reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf); |
| 199 | |
| 200 | return 0; |
| 201 | } |
| 202 | |
| 203 | static int ak881x_s_stream(struct v4l2_subdev *sd, int enable) |
| 204 | { |
| 205 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 206 | struct ak881x *ak881x = to_ak881x(client); |
| 207 | |
| 208 | if (enable) { |
| 209 | u8 dac; |
| 210 | /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */ |
| 211 | /* Default: composite output */ |
| 212 | if (ak881x->pdata->flags & AK881X_COMPONENT) |
| 213 | dac = 3; |
| 214 | else |
| 215 | dac = 4; |
| 216 | /* Turn on the DAC(s) */ |
| 217 | reg_write(client, AK881X_DAC_MODE, dac); |
| 218 | dev_dbg(&client->dev, "chip status 0x%x\n", |
| 219 | reg_read(client, AK881X_STATUS)); |
| 220 | } else { |
| 221 | /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */ |
| 222 | reg_write(client, AK881X_DAC_MODE, 0); |
| 223 | dev_dbg(&client->dev, "chip status 0x%x\n", |
| 224 | reg_read(client, AK881X_STATUS)); |
| 225 | } |
| 226 | |
| 227 | return 0; |
| 228 | } |
| 229 | |
| 230 | static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = { |
| 231 | .g_chip_ident = ak881x_g_chip_ident, |
| 232 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 233 | .g_register = ak881x_g_register, |
| 234 | .s_register = ak881x_s_register, |
| 235 | #endif |
| 236 | }; |
| 237 | |
| 238 | static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { |
| 239 | .s_mbus_fmt = ak881x_s_mbus_fmt, |
| 240 | .g_mbus_fmt = ak881x_try_g_mbus_fmt, |
| 241 | .try_mbus_fmt = ak881x_try_g_mbus_fmt, |
| 242 | .cropcap = ak881x_cropcap, |
| 243 | .enum_mbus_fmt = ak881x_enum_mbus_fmt, |
| 244 | .s_std_output = ak881x_s_std_output, |
| 245 | .s_stream = ak881x_s_stream, |
| 246 | }; |
| 247 | |
| 248 | static struct v4l2_subdev_ops ak881x_subdev_ops = { |
| 249 | .core = &ak881x_subdev_core_ops, |
| 250 | .video = &ak881x_subdev_video_ops, |
| 251 | }; |
| 252 | |
| 253 | static int ak881x_probe(struct i2c_client *client, |
| 254 | const struct i2c_device_id *did) |
| 255 | { |
| 256 | struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| 257 | struct ak881x *ak881x; |
| 258 | u8 ifmode, data; |
| 259 | |
| 260 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
| 261 | dev_warn(&adapter->dev, |
| 262 | "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); |
| 263 | return -EIO; |
| 264 | } |
| 265 | |
| 266 | ak881x = kzalloc(sizeof(struct ak881x), GFP_KERNEL); |
| 267 | if (!ak881x) |
| 268 | return -ENOMEM; |
| 269 | |
| 270 | v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops); |
| 271 | |
| 272 | data = reg_read(client, AK881X_DEVICE_ID); |
| 273 | |
| 274 | switch (data) { |
| 275 | case 0x13: |
| 276 | ak881x->id = V4L2_IDENT_AK8813; |
| 277 | break; |
| 278 | case 0x14: |
| 279 | ak881x->id = V4L2_IDENT_AK8814; |
| 280 | break; |
| 281 | default: |
| 282 | dev_err(&client->dev, |
| 283 | "No ak881x chip detected, register read %x\n", data); |
| 284 | kfree(ak881x); |
| 285 | return -ENODEV; |
| 286 | } |
| 287 | |
| 288 | ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION); |
| 289 | ak881x->pdata = client->dev.platform_data; |
| 290 | |
| 291 | if (ak881x->pdata) { |
| 292 | if (ak881x->pdata->flags & AK881X_FIELD) |
| 293 | ifmode = 4; |
| 294 | else |
| 295 | ifmode = 0; |
| 296 | |
| 297 | switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) { |
| 298 | case AK881X_IF_MODE_BT656: |
| 299 | ifmode |= 1; |
| 300 | break; |
| 301 | case AK881X_IF_MODE_MASTER: |
| 302 | ifmode |= 2; |
| 303 | break; |
| 304 | case AK881X_IF_MODE_SLAVE: |
| 305 | default: |
| 306 | break; |
| 307 | } |
| 308 | |
| 309 | dev_dbg(&client->dev, "IF mode %x\n", ifmode); |
| 310 | |
| 311 | /* |
| 312 | * "Line Blanking No." seems to be the same as the number of |
| 313 | * "black" lines on, e.g., SuperH VOU, whose default value of 20 |
| 314 | * "incidentally" matches ak881x' default |
| 315 | */ |
| 316 | reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3)); |
| 317 | } |
| 318 | |
| 319 | /* Hardware default: NTSC-M */ |
| 320 | ak881x->lines = 480; |
| 321 | |
| 322 | dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n", |
| 323 | data, ak881x->revision); |
| 324 | |
| 325 | return 0; |
| 326 | } |
| 327 | |
| 328 | static int ak881x_remove(struct i2c_client *client) |
| 329 | { |
| 330 | struct ak881x *ak881x = to_ak881x(client); |
| 331 | |
| 332 | v4l2_device_unregister_subdev(&ak881x->subdev); |
| 333 | kfree(ak881x); |
| 334 | |
| 335 | return 0; |
| 336 | } |
| 337 | |
| 338 | static const struct i2c_device_id ak881x_id[] = { |
| 339 | { "ak8813", 0 }, |
| 340 | { "ak8814", 0 }, |
| 341 | { } |
| 342 | }; |
| 343 | MODULE_DEVICE_TABLE(i2c, ak881x_id); |
| 344 | |
| 345 | static struct i2c_driver ak881x_i2c_driver = { |
| 346 | .driver = { |
| 347 | .name = "ak881x", |
| 348 | }, |
| 349 | .probe = ak881x_probe, |
| 350 | .remove = ak881x_remove, |
| 351 | .id_table = ak881x_id, |
| 352 | }; |
| 353 | |
| 354 | static int __init ak881x_module_init(void) |
| 355 | { |
| 356 | return i2c_add_driver(&ak881x_i2c_driver); |
| 357 | } |
| 358 | |
| 359 | static void __exit ak881x_module_exit(void) |
| 360 | { |
| 361 | i2c_del_driver(&ak881x_i2c_driver); |
| 362 | } |
| 363 | |
| 364 | module_init(ak881x_module_init); |
| 365 | module_exit(ak881x_module_exit); |
| 366 | |
| 367 | MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814"); |
| 368 | MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| 369 | MODULE_LICENSE("GPL v2"); |