Torsten Schenk | c6d43ba | 2011-01-24 18:45:30 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Linux driver for TerraTec DMX 6Fire USB |
| 3 | * |
| 4 | * Device communications |
| 5 | * |
| 6 | * Author: Torsten Schenk <torsten.schenk@zoho.com> |
| 7 | * Created: Jan 01, 2011 |
| 8 | * Version: 0.3.0 |
| 9 | * Copyright: (C) Torsten Schenk |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify |
| 12 | * it under the terms of the GNU General Public License as published by |
| 13 | * the Free Software Foundation; either version 2 of the License, or |
| 14 | * (at your option) any later version. |
| 15 | */ |
| 16 | |
| 17 | #include "comm.h" |
| 18 | #include "chip.h" |
| 19 | #include "midi.h" |
| 20 | |
| 21 | enum { |
| 22 | COMM_EP = 1, |
| 23 | COMM_FPGA_EP = 2 |
| 24 | }; |
| 25 | |
| 26 | static void usb6fire_comm_init_urb(struct comm_runtime *rt, struct urb *urb, |
| 27 | u8 *buffer, void *context, void(*handler)(struct urb *urb)) |
| 28 | { |
| 29 | usb_init_urb(urb); |
| 30 | urb->transfer_buffer = buffer; |
| 31 | urb->pipe = usb_sndintpipe(rt->chip->dev, COMM_EP); |
| 32 | urb->complete = handler; |
| 33 | urb->context = context; |
| 34 | urb->interval = 1; |
| 35 | urb->dev = rt->chip->dev; |
| 36 | } |
| 37 | |
| 38 | static void usb6fire_comm_receiver_handler(struct urb *urb) |
| 39 | { |
| 40 | struct comm_runtime *rt = urb->context; |
| 41 | struct midi_runtime *midi_rt = rt->chip->midi; |
| 42 | |
| 43 | if (!urb->status) { |
| 44 | if (rt->receiver_buffer[0] == 0x10) /* midi in event */ |
| 45 | if (midi_rt) |
| 46 | midi_rt->in_received(midi_rt, |
| 47 | rt->receiver_buffer + 2, |
| 48 | rt->receiver_buffer[1]); |
| 49 | } |
| 50 | |
| 51 | if (!rt->chip->shutdown) { |
| 52 | urb->status = 0; |
| 53 | urb->actual_length = 0; |
| 54 | if (usb_submit_urb(urb, GFP_ATOMIC) < 0) |
| 55 | snd_printk(KERN_WARNING PREFIX |
| 56 | "comm data receiver aborted.\n"); |
| 57 | } |
| 58 | } |
| 59 | |
| 60 | static void usb6fire_comm_init_buffer(u8 *buffer, u8 id, u8 request, |
| 61 | u8 reg, u8 vl, u8 vh) |
| 62 | { |
| 63 | buffer[0] = 0x01; |
| 64 | buffer[2] = request; |
| 65 | buffer[3] = id; |
| 66 | switch (request) { |
| 67 | case 0x02: |
| 68 | buffer[1] = 0x05; /* length (starting at buffer[2]) */ |
| 69 | buffer[4] = reg; |
| 70 | buffer[5] = vl; |
| 71 | buffer[6] = vh; |
| 72 | break; |
| 73 | |
| 74 | case 0x12: |
| 75 | buffer[1] = 0x0b; /* length (starting at buffer[2]) */ |
| 76 | buffer[4] = 0x00; |
| 77 | buffer[5] = 0x18; |
| 78 | buffer[6] = 0x05; |
| 79 | buffer[7] = 0x00; |
| 80 | buffer[8] = 0x01; |
| 81 | buffer[9] = 0x00; |
| 82 | buffer[10] = 0x9e; |
| 83 | buffer[11] = reg; |
| 84 | buffer[12] = vl; |
| 85 | break; |
| 86 | |
| 87 | case 0x20: |
| 88 | case 0x21: |
| 89 | case 0x22: |
| 90 | buffer[1] = 0x04; |
| 91 | buffer[4] = reg; |
| 92 | buffer[5] = vl; |
| 93 | break; |
| 94 | } |
| 95 | } |
| 96 | |
| 97 | static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev) |
| 98 | { |
| 99 | int ret; |
| 100 | int actual_len; |
| 101 | |
| 102 | ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP), |
| 103 | buffer, buffer[1] + 2, &actual_len, HZ); |
| 104 | if (ret < 0) |
| 105 | return ret; |
| 106 | else if (actual_len != buffer[1] + 2) |
| 107 | return -EIO; |
| 108 | return 0; |
| 109 | } |
| 110 | |
| 111 | static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request, |
| 112 | u8 reg, u8 value) |
| 113 | { |
| 114 | u8 buffer[13]; /* 13: maximum length of message */ |
| 115 | |
| 116 | usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00); |
| 117 | return usb6fire_comm_send_buffer(buffer, rt->chip->dev); |
| 118 | } |
| 119 | |
| 120 | static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request, |
| 121 | u8 reg, u8 vl, u8 vh) |
| 122 | { |
| 123 | u8 buffer[13]; /* 13: maximum length of message */ |
| 124 | |
| 125 | usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh); |
| 126 | return usb6fire_comm_send_buffer(buffer, rt->chip->dev); |
| 127 | } |
| 128 | |
| 129 | int __devinit usb6fire_comm_init(struct sfire_chip *chip) |
| 130 | { |
| 131 | struct comm_runtime *rt = kzalloc(sizeof(struct comm_runtime), |
| 132 | GFP_KERNEL); |
| 133 | struct urb *urb = &rt->receiver; |
| 134 | int ret; |
| 135 | |
| 136 | if (!rt) |
| 137 | return -ENOMEM; |
| 138 | |
| 139 | rt->serial = 1; |
| 140 | rt->chip = chip; |
| 141 | usb_init_urb(urb); |
| 142 | rt->init_urb = usb6fire_comm_init_urb; |
| 143 | rt->write8 = usb6fire_comm_write8; |
| 144 | rt->write16 = usb6fire_comm_write16; |
| 145 | |
| 146 | /* submit an urb that receives communication data from device */ |
| 147 | urb->transfer_buffer = rt->receiver_buffer; |
| 148 | urb->transfer_buffer_length = COMM_RECEIVER_BUFSIZE; |
| 149 | urb->pipe = usb_rcvintpipe(chip->dev, COMM_EP); |
| 150 | urb->dev = chip->dev; |
| 151 | urb->complete = usb6fire_comm_receiver_handler; |
| 152 | urb->context = rt; |
| 153 | urb->interval = 1; |
| 154 | ret = usb_submit_urb(urb, GFP_KERNEL); |
| 155 | if (ret < 0) { |
| 156 | kfree(rt); |
| 157 | snd_printk(KERN_ERR PREFIX "cannot create comm data receiver."); |
| 158 | return ret; |
| 159 | } |
| 160 | chip->comm = rt; |
| 161 | return 0; |
| 162 | } |
| 163 | |
| 164 | void usb6fire_comm_abort(struct sfire_chip *chip) |
| 165 | { |
| 166 | struct comm_runtime *rt = chip->comm; |
| 167 | |
| 168 | if (rt) |
| 169 | usb_poison_urb(&rt->receiver); |
| 170 | } |
| 171 | |
| 172 | void usb6fire_comm_destroy(struct sfire_chip *chip) |
| 173 | { |
| 174 | kfree(chip->comm); |
| 175 | chip->comm = NULL; |
| 176 | } |