Fabio Baltieri | f0e5bd4 | 2013-01-29 09:57:19 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) ST-Ericsson SA 2011-2013 |
| 3 | * |
| 4 | * License Terms: GNU General Public License v2 |
| 5 | * |
| 6 | * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson |
| 7 | * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson |
| 8 | */ |
| 9 | |
| 10 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 11 | |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/kernel.h> |
| 14 | #include <linux/moduleparam.h> |
| 15 | #include <linux/miscdevice.h> |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/uaccess.h> |
| 18 | #include <linux/watchdog.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/platform_data/ux500_wdt.h> |
| 21 | |
| 22 | #include <linux/mfd/dbx500-prcmu.h> |
| 23 | |
| 24 | #define WATCHDOG_TIMEOUT 600 /* 10 minutes */ |
| 25 | |
| 26 | #define WATCHDOG_MIN 0 |
| 27 | #define WATCHDOG_MAX28 268435 /* 28 bit resolution in ms == 268435.455 s */ |
| 28 | #define WATCHDOG_MAX32 4294967 /* 32 bit resolution in ms == 4294967.295 s */ |
| 29 | |
| 30 | static unsigned int timeout = WATCHDOG_TIMEOUT; |
| 31 | module_param(timeout, uint, 0); |
| 32 | MODULE_PARM_DESC(timeout, |
| 33 | "Watchdog timeout in seconds. default=" |
| 34 | __MODULE_STRING(WATCHDOG_TIMEOUT) "."); |
| 35 | |
| 36 | static bool nowayout = WATCHDOG_NOWAYOUT; |
| 37 | module_param(nowayout, bool, 0); |
| 38 | MODULE_PARM_DESC(nowayout, |
| 39 | "Watchdog cannot be stopped once started (default=" |
| 40 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| 41 | |
| 42 | static int ux500_wdt_start(struct watchdog_device *wdd) |
| 43 | { |
| 44 | return prcmu_enable_a9wdog(PRCMU_WDOG_ALL); |
| 45 | } |
| 46 | |
| 47 | static int ux500_wdt_stop(struct watchdog_device *wdd) |
| 48 | { |
| 49 | return prcmu_disable_a9wdog(PRCMU_WDOG_ALL); |
| 50 | } |
| 51 | |
| 52 | static int ux500_wdt_keepalive(struct watchdog_device *wdd) |
| 53 | { |
| 54 | return prcmu_kick_a9wdog(PRCMU_WDOG_ALL); |
| 55 | } |
| 56 | |
| 57 | static int ux500_wdt_set_timeout(struct watchdog_device *wdd, |
| 58 | unsigned int timeout) |
| 59 | { |
| 60 | ux500_wdt_stop(wdd); |
| 61 | prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); |
| 62 | ux500_wdt_start(wdd); |
| 63 | |
| 64 | return 0; |
| 65 | } |
| 66 | |
| 67 | static const struct watchdog_info ux500_wdt_info = { |
| 68 | .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| 69 | .identity = "Ux500 WDT", |
| 70 | .firmware_version = 1, |
| 71 | }; |
| 72 | |
| 73 | static const struct watchdog_ops ux500_wdt_ops = { |
| 74 | .owner = THIS_MODULE, |
| 75 | .start = ux500_wdt_start, |
| 76 | .stop = ux500_wdt_stop, |
| 77 | .ping = ux500_wdt_keepalive, |
| 78 | .set_timeout = ux500_wdt_set_timeout, |
| 79 | }; |
| 80 | |
| 81 | static struct watchdog_device ux500_wdt = { |
| 82 | .info = &ux500_wdt_info, |
| 83 | .ops = &ux500_wdt_ops, |
| 84 | .min_timeout = WATCHDOG_MIN, |
| 85 | .max_timeout = WATCHDOG_MAX32, |
| 86 | }; |
| 87 | |
| 88 | static int ux500_wdt_probe(struct platform_device *pdev) |
| 89 | { |
| 90 | int ret; |
| 91 | struct ux500_wdt_data *pdata = pdev->dev.platform_data; |
| 92 | |
| 93 | if (pdata) { |
| 94 | if (pdata->timeout > 0) |
| 95 | timeout = pdata->timeout; |
| 96 | if (pdata->has_28_bits_resolution) |
| 97 | ux500_wdt.max_timeout = WATCHDOG_MAX28; |
| 98 | } |
| 99 | |
| 100 | watchdog_set_nowayout(&ux500_wdt, nowayout); |
| 101 | |
| 102 | /* disable auto off on sleep */ |
| 103 | prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); |
| 104 | |
| 105 | /* set HW initial value */ |
| 106 | prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); |
| 107 | |
| 108 | ret = watchdog_register_device(&ux500_wdt); |
| 109 | if (ret) |
| 110 | return ret; |
| 111 | |
| 112 | dev_info(&pdev->dev, "initialized\n"); |
| 113 | |
| 114 | return 0; |
| 115 | } |
| 116 | |
| 117 | static int ux500_wdt_remove(struct platform_device *dev) |
| 118 | { |
| 119 | watchdog_unregister_device(&ux500_wdt); |
| 120 | |
| 121 | return 0; |
| 122 | } |
| 123 | |
| 124 | #ifdef CONFIG_PM |
| 125 | static int ux500_wdt_suspend(struct platform_device *pdev, |
| 126 | pm_message_t state) |
| 127 | { |
| 128 | if (watchdog_active(&ux500_wdt)) { |
| 129 | ux500_wdt_stop(&ux500_wdt); |
| 130 | prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true); |
| 131 | |
| 132 | prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); |
| 133 | ux500_wdt_start(&ux500_wdt); |
| 134 | } |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | static int ux500_wdt_resume(struct platform_device *pdev) |
| 139 | { |
| 140 | if (watchdog_active(&ux500_wdt)) { |
| 141 | ux500_wdt_stop(&ux500_wdt); |
| 142 | prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); |
| 143 | |
| 144 | prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); |
| 145 | ux500_wdt_start(&ux500_wdt); |
| 146 | } |
| 147 | return 0; |
| 148 | } |
| 149 | #else |
| 150 | #define ux500_wdt_suspend NULL |
| 151 | #define ux500_wdt_resume NULL |
| 152 | #endif |
| 153 | |
| 154 | static struct platform_driver ux500_wdt_driver = { |
| 155 | .probe = ux500_wdt_probe, |
| 156 | .remove = ux500_wdt_remove, |
| 157 | .suspend = ux500_wdt_suspend, |
| 158 | .resume = ux500_wdt_resume, |
| 159 | .driver = { |
| 160 | .owner = THIS_MODULE, |
| 161 | .name = "ux500_wdt", |
| 162 | }, |
| 163 | }; |
| 164 | |
| 165 | module_platform_driver(ux500_wdt_driver); |
| 166 | |
| 167 | MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>"); |
| 168 | MODULE_DESCRIPTION("Ux500 Watchdog Driver"); |
| 169 | MODULE_LICENSE("GPL"); |
| 170 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |
| 171 | MODULE_ALIAS("platform:ux500_wdt"); |