sound/usb/line6/driver.c

/*
 * Line6 Linux USB driver - 0.9.1beta
 *
 * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
 *
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License as
 *	published by the Free Software Foundation, version 2.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/usb.h>

#include "audio.h"
#include "capture.h"
#include "driver.h"
#include "midi.h"
#include "playback.h"
#include "revision.h"
#include "usbdefs.h"

#define DRIVER_AUTHOR  "Markus Grabner <grabner@icg.tugraz.at>"
#define DRIVER_DESC    "Line6 USB Driver"
#define DRIVER_VERSION "0.9.1beta" DRIVER_REVISION

/*
	This is Line6's MIDI manufacturer ID.
*/
const unsigned char line6_midi_id[] = {
	0x00, 0x01, 0x0c
};
EXPORT_SYMBOL_GPL(line6_midi_id);

/*
	Code to request version of POD, Variax interface
	(and maybe other devices).
*/
static const char line6_request_version[] = {
	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
};

/**
	 Class for asynchronous messages.
*/
struct message {
	struct usb_line6 *line6;
	const char *buffer;
	int size;
	int done;
};

/*
	Forward declarations.
*/
static void line6_data_received(struct urb *urb);
static int line6_send_raw_message_async_part(struct message *msg,
					     struct urb *urb);

/*
	Start to listen on endpoint.
*/
static int line6_start_listen(struct usb_line6 *line6)
{
	int err;

	usb_fill_int_urb(line6->urb_listen, line6->usbdev,
		usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r),
		line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
		line6_data_received, line6, line6->interval);
	line6->urb_listen->actual_length = 0;
	err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
	return err;
}

/*
	Stop listening on endpoint.
*/
static void line6_stop_listen(struct usb_line6 *line6)
{
	usb_kill_urb(line6->urb_listen);
}

/*
	Send raw message in pieces of wMaxPacketSize bytes.
*/
int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
			   int size)
{
	int i, done = 0;

	for (i = 0; i < size; i += line6->max_packet_size) {
		int partial;
		const char *frag_buf = buffer + i;
		int frag_size = min(line6->max_packet_size, size - i);
		int retval;

		retval = usb_interrupt_msg(line6->usbdev,
					usb_sndintpipe(line6->usbdev,
						line6->properties->ep_ctrl_w),
					(char *)frag_buf, frag_size,
					&partial, LINE6_TIMEOUT * HZ);

		if (retval) {
			dev_err(line6->ifcdev,
				"usb_interrupt_msg failed (%d)\n", retval);
			break;
		}

		done += frag_size;
	}

	return done;
}

/*
	Notification of completion of asynchronous request transmission.
*/
static void line6_async_request_sent(struct urb *urb)
{
	struct message *msg = (struct message *)urb->context;

	if (msg->done >= msg->size) {
		usb_free_urb(urb);
		kfree(msg);
	} else
		line6_send_raw_message_async_part(msg, urb);
}

/*
	Asynchronously send part of a raw message.
*/
static int line6_send_raw_message_async_part(struct message *msg,
					     struct urb *urb)
{
	int retval;
	struct usb_line6 *line6 = msg->line6;
	int done = msg->done;
	int bytes = min(msg->size - done, line6->max_packet_size);

	usb_fill_int_urb(urb, line6->usbdev,
		usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w),
		(char *)msg->buffer + done, bytes,
		line6_async_request_sent, msg, line6->interval);

	msg->done += bytes;
	retval = usb_submit_urb(urb, GFP_ATOMIC);

	if (retval < 0) {
		dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
			__func__, retval);
		usb_free_urb(urb);
		kfree(msg);
		return retval;
	}

	return 0;
}

/*
	Setup and start timer.
*/
void line6_start_timer(struct timer_list *timer, unsigned int msecs,
		       void (*function)(unsigned long), unsigned long data)
{
	setup_timer(timer, function, data);
	mod_timer(timer, jiffies + msecs * HZ / 1000);
}
EXPORT_SYMBOL_GPL(line6_start_timer);

/*
	Asynchronously send raw message.
*/
int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
				 int size)
{
	struct message *msg;
	struct urb *urb;

	/* create message: */
	msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
	if (msg == NULL)
		return -ENOMEM;

	/* create URB: */
	urb = usb_alloc_urb(0, GFP_ATOMIC);

	if (urb == NULL) {
		kfree(msg);
		dev_err(line6->ifcdev, "Out of memory\n");
		return -ENOMEM;
	}

	/* set message data: */
	msg->line6 = line6;
	msg->buffer = buffer;
	msg->size = size;
	msg->done = 0;

	/* start sending: */
	return line6_send_raw_message_async_part(msg, urb);
}
EXPORT_SYMBOL_GPL(line6_send_raw_message_async);

/*
	Send asynchronous device version request.
*/
int line6_version_request_async(struct usb_line6 *line6)
{
	char *buffer;
	int retval;

	buffer = kmemdup(line6_request_version,
			sizeof(line6_request_version), GFP_ATOMIC);
	if (buffer == NULL) {
		dev_err(line6->ifcdev, "Out of memory");
		return -ENOMEM;
	}

	retval = line6_send_raw_message_async(line6, buffer,
					      sizeof(line6_request_version));
	kfree(buffer);
	return retval;
}
EXPORT_SYMBOL_GPL(line6_version_request_async);

/*
	Send sysex message in pieces of wMaxPacketSize bytes.
*/
int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
			     int size)
{
	return line6_send_raw_message(line6, buffer,
				      size + SYSEX_EXTRA_SIZE) -
	    SYSEX_EXTRA_SIZE;
}
EXPORT_SYMBOL_GPL(line6_send_sysex_message);

/*
	Allocate buffer for sysex message and prepare header.
	@param code sysex message code
	@param size number of bytes between code and sysex end
*/
char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
			       int size)
{
	char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC);

	if (!buffer)
		return NULL;

	buffer[0] = LINE6_SYSEX_BEGIN;
	memcpy(buffer + 1, line6_midi_id, sizeof(line6_midi_id));
	buffer[sizeof(line6_midi_id) + 1] = code1;
	buffer[sizeof(line6_midi_id) + 2] = code2;
	buffer[sizeof(line6_midi_id) + 3 + size] = LINE6_SYSEX_END;
	return buffer;
}
EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer);

/*
	Notification of data received from the Line6 device.
*/
static void line6_data_received(struct urb *urb)
{
	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
	struct midi_buffer *mb = &line6->line6midi->midibuf_in;
	int done;

	if (urb->status == -ESHUTDOWN)
		return;

	done =
	    line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);

	if (done < urb->actual_length) {
		line6_midibuf_ignore(mb, done);
		dev_dbg(line6->ifcdev, "%d %d buffer overflow - message skipped\n",
			done, urb->actual_length);
	}

	for (;;) {
		done =
		    line6_midibuf_read(mb, line6->buffer_message,
				       LINE6_MESSAGE_MAXLEN);

		if (done == 0)
			break;

		line6->message_length = done;
		line6_midi_receive(line6, line6->buffer_message, done);

		if (line6->process_message)
			line6->process_message(line6);
	}

	line6_start_listen(line6);
}

/*
	Send channel number (i.e., switch to a different sound).
*/
int line6_send_program(struct usb_line6 *line6, u8 value)
{
	int retval;
	unsigned char *buffer;
	int partial;

	buffer = kmalloc(2, GFP_KERNEL);
	if (!buffer)
		return -ENOMEM;

	buffer[0] = LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_HOST;
	buffer[1] = value;

	retval = usb_interrupt_msg(line6->usbdev,
				   usb_sndintpipe(line6->usbdev,
						  line6->properties->ep_ctrl_w),
				   buffer, 2, &partial, LINE6_TIMEOUT * HZ);

	if (retval)
		dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n",
			retval);

	kfree(buffer);
	return retval;
}

/*
	Transmit Line6 control parameter.
*/
int line6_transmit_parameter(struct usb_line6 *line6, int param, u8 value)
{
	int retval;
	unsigned char *buffer;
	int partial;

	buffer = kmalloc(3, GFP_KERNEL);
	if (!buffer)
		return -ENOMEM;

	buffer[0] = LINE6_PARAM_CHANGE | LINE6_CHANNEL_HOST;
	buffer[1] = param;
	buffer[2] = value;

	retval = usb_interrupt_msg(line6->usbdev,
				   usb_sndintpipe(line6->usbdev,
						  line6->properties->ep_ctrl_w),
				   buffer, 3, &partial, LINE6_TIMEOUT * HZ);

	if (retval)
		dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n",
			retval);

	kfree(buffer);
	return retval;
}

/*
	Read data from device.
*/
int line6_read_data(struct usb_line6 *line6, int address, void *data,
		    size_t datalen)
{
	struct usb_device *usbdev = line6->usbdev;
	int ret;
	unsigned char len;

	/* query the serial number: */
	ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
			      (datalen << 8) | 0x21, address,
			      NULL, 0, LINE6_TIMEOUT * HZ);

	if (ret < 0) {
		dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
		return ret;
	}

	/* Wait for data length. We'll get 0xff until length arrives. */
	do {
		ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
				      USB_TYPE_VENDOR | USB_RECIP_DEVICE |
				      USB_DIR_IN,
				      0x0012, 0x0000, &len, 1,
				      LINE6_TIMEOUT * HZ);
		if (ret < 0) {
			dev_err(line6->ifcdev,
				"receive length failed (error %d)\n", ret);
			return ret;
		}
	} while (len == 0xff);

	if (len != datalen) {
		/* should be equal or something went wrong */
		dev_err(line6->ifcdev,
			"length mismatch (expected %d, got %d)\n",
			(int)datalen, (int)len);
		return -EINVAL;
	}

	/* receive the result: */
	ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
			      0x0013, 0x0000, data, datalen,
			      LINE6_TIMEOUT * HZ);

	if (ret < 0) {
		dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
		return ret;
	}

	return 0;
}
EXPORT_SYMBOL_GPL(line6_read_data);

/*
	Write data to device.
*/
int line6_write_data(struct usb_line6 *line6, int address, void *data,
		     size_t datalen)
{
	struct usb_device *usbdev = line6->usbdev;
	int ret;
	unsigned char status;

	ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
			      0x0022, address, data, datalen,
			      LINE6_TIMEOUT * HZ);

	if (ret < 0) {
		dev_err(line6->ifcdev,
			"write request failed (error %d)\n", ret);
		return ret;
	}

	do {
		ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
				      0x67,
				      USB_TYPE_VENDOR | USB_RECIP_DEVICE |
				      USB_DIR_IN,
				      0x0012, 0x0000,
				      &status, 1, LINE6_TIMEOUT * HZ);

		if (ret < 0) {
			dev_err(line6->ifcdev,
				"receiving status failed (error %d)\n", ret);
			return ret;
		}
	} while (status == 0xff);

	if (status != 0) {
		dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
		return -EINVAL;
	}

	return 0;
}
EXPORT_SYMBOL_GPL(line6_write_data);

/*
	Read Line6 device serial number.
	(POD, TonePort, GuitarPort)
*/
int line6_read_serial_number(struct usb_line6 *line6, int *serial_number)
{
	return line6_read_data(line6, 0x80d0, serial_number,
			       sizeof(*serial_number));
}
EXPORT_SYMBOL_GPL(line6_read_serial_number);

/*
	No operation (i.e., unsupported).
*/
ssize_t line6_nop_read(struct device *dev, struct device_attribute *attr,
		       char *buf)
{
	return 0;
}
EXPORT_SYMBOL_GPL(line6_nop_read);

/*
	Generic destructor.
*/
static void line6_destruct(struct usb_interface *interface)
{
	struct usb_line6 *line6;

	if (interface == NULL)
		return;
	line6 = usb_get_intfdata(interface);
	if (line6 == NULL)
		return;

	/* free buffer memory first: */
	kfree(line6->buffer_message);
	kfree(line6->buffer_listen);

	/* then free URBs: */
	usb_free_urb(line6->urb_listen);

	/* make sure the device isn't destructed twice: */
	usb_set_intfdata(interface, NULL);
}

/*
	Probe USB device.
*/
int line6_probe(struct usb_interface *interface,
		struct usb_line6 *line6,
		const struct line6_properties *properties,
		int (*private_init)(struct usb_interface *, struct usb_line6 *))
{
	struct usb_device *usbdev;
	int interface_number;
	int ret;

	if (!interface) {
		ret = -ENODEV;
		goto err_put;
	}
	usbdev = interface_to_usbdev(interface);
	if (!usbdev) {
		ret = -ENODEV;
		goto err_put;
	}

	/* we don't handle multiple configurations */
	if (usbdev->descriptor.bNumConfigurations != 1) {
		ret = -ENODEV;
		goto err_put;
	}

	/* initialize device info: */
	dev_info(&interface->dev, "Line6 %s found\n", properties->name);

	/* query interface number */
	interface_number = interface->cur_altsetting->desc.bInterfaceNumber;

	ret = usb_set_interface(usbdev, interface_number,
			properties->altsetting);
	if (ret < 0) {
		dev_err(&interface->dev, "set_interface failed\n");
		goto err_put;
	}

	/* store basic data: */
	line6->properties = properties;
	line6->usbdev = usbdev;
	line6->ifcdev = &interface->dev;

	/* get data from endpoint descriptor (see usb_maxpacket): */
	{
		struct usb_host_endpoint *ep;
		unsigned pipe = usb_rcvintpipe(usbdev, properties->ep_ctrl_r);
		unsigned epnum = usb_pipeendpoint(pipe);
		ep = usbdev->ep_in[epnum];

		if (ep != NULL) {
			line6->interval = ep->desc.bInterval;
			line6->max_packet_size =
			    le16_to_cpu(ep->desc.wMaxPacketSize);
		} else {
			line6->interval = LINE6_FALLBACK_INTERVAL;
			line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
			dev_err(line6->ifcdev,
				"endpoint not available, using fallback values");
		}
	}

	usb_set_intfdata(interface, line6);

	if (properties->capabilities & LINE6_CAP_CONTROL) {
		/* initialize USB buffers: */
		line6->buffer_listen =
		    kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
		if (line6->buffer_listen == NULL) {
			ret = -ENOMEM;
			goto err_destruct;
		}

		line6->buffer_message =
		    kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
		if (line6->buffer_message == NULL) {
			ret = -ENOMEM;
			goto err_destruct;
		}

		line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);

		if (line6->urb_listen == NULL) {
			dev_err(&interface->dev, "Out of memory\n");
			ret = -ENOMEM;
			goto err_destruct;
		}

		ret = line6_start_listen(line6);
		if (ret < 0) {
			dev_err(&interface->dev, "%s: usb_submit_urb failed\n",
				__func__);
			goto err_destruct;
		}
	}

	/* initialize device data based on device: */
	ret = private_init(interface, line6);
	if (ret < 0)
		goto err_destruct;

	ret = sysfs_create_link(&interface->dev.kobj, &usbdev->dev.kobj,
				"usb_device");
	if (ret < 0)
		goto err_destruct;

	/* creation of additional special files should go here */

	dev_info(&interface->dev, "Line6 %s now attached\n",
		 line6->properties->name);

	/* increment reference counters: */
	usb_get_intf(interface);
	usb_get_dev(usbdev);

	return 0;

err_destruct:
	line6_destruct(interface);
err_put:
	return ret;
}
EXPORT_SYMBOL_GPL(line6_probe);

/*
	Line6 device disconnected.
*/
void line6_disconnect(struct usb_interface *interface)
{
	struct usb_line6 *line6;
	struct usb_device *usbdev;
	int interface_number;

	if (interface == NULL)
		return;
	usbdev = interface_to_usbdev(interface);
	if (usbdev == NULL)
		return;

	/* removal of additional special files should go here */

	sysfs_remove_link(&interface->dev.kobj, "usb_device");

	interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
	line6 = usb_get_intfdata(interface);

	if (line6 != NULL) {
		if (line6->urb_listen != NULL)
			line6_stop_listen(line6);

		if (usbdev != line6->usbdev)
			dev_err(line6->ifcdev,
				"driver bug: inconsistent usb device\n");

		line6->disconnect(interface);

		dev_info(&interface->dev, "Line6 %s now disconnected\n",
			 line6->properties->name);
	}

	line6_destruct(interface);

	/* free interface data: */
	kfree(line6);

	/* decrement reference counters: */
	usb_put_intf(interface);
	usb_put_dev(usbdev);
}
EXPORT_SYMBOL_GPL(line6_disconnect);

#ifdef CONFIG_PM

/*
	Suspend Line6 device.
*/
int line6_suspend(struct usb_interface *interface, pm_message_t message)
{
	struct usb_line6 *line6 = usb_get_intfdata(interface);
	struct snd_line6_pcm *line6pcm = line6->line6pcm;

	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);

	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
		line6_stop_listen(line6);

	if (line6pcm != NULL) {
		snd_pcm_suspend_all(line6pcm->pcm);
		line6_pcm_disconnect(line6pcm);
		line6pcm->flags = 0;
	}

	return 0;
}
EXPORT_SYMBOL_GPL(line6_suspend);

/*
	Resume Line6 device.
*/
int line6_resume(struct usb_interface *interface)
{
	struct usb_line6 *line6 = usb_get_intfdata(interface);

	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
		line6_start_listen(line6);

	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);
	return 0;
}
EXPORT_SYMBOL_GPL(line6_resume);

#endif /* CONFIG_PM */

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);