arch/mips/pmc-sierra/yosemite/irq.c

/*
 * Copyright (C) 2003 PMC-Sierra Inc.
 * Author: Manish Lachwani (lachwani@pmc-sierra.com)
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Second level Interrupt handlers for the PMC-Sierra Titan/Yosemite board
 */
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/titan_dep.h>

/* Hypertransport specific */
#define IRQ_ACK_BITS            0x00000000	/* Ack bits */

#define HYPERTRANSPORT_INTA     0x78		/* INTA# */
#define HYPERTRANSPORT_INTB     0x79		/* INTB# */
#define HYPERTRANSPORT_INTC     0x7a		/* INTC# */
#define HYPERTRANSPORT_INTD     0x7b		/* INTD# */

extern asmlinkage void titan_handle_int(void);
extern void jaguar_mailbox_irq(struct pt_regs *);

/*
 * Handle hypertransport & SMP interrupts. The interrupt lines are scarce.
 * For interprocessor interrupts, the best thing to do is to use the INTMSG
 * register. We use the same external interrupt line, i.e. INTB3 and monitor
 * another status bit
 */
asmlinkage void ll_ht_smp_irq_handler(int irq, struct pt_regs *regs)
{
	u32 status = OCD_READ(RM9000x2_OCD_INTP0STATUS4);

	/* Ack all the bits that correspond to the interrupt sources */
	if (status != 0)
		OCD_WRITE(RM9000x2_OCD_INTP0STATUS4, IRQ_ACK_BITS);

	status = OCD_READ(RM9000x2_OCD_INTP1STATUS4);
	if (status != 0)
		OCD_WRITE(RM9000x2_OCD_INTP1STATUS4, IRQ_ACK_BITS);

#ifdef CONFIG_HT_LEVEL_TRIGGER
	/*
	 * Level Trigger Mode only. Send the HT EOI message back to the source.
	 */
	switch (status) {
	case 0x1000000:
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
		break;
	case 0x2000000:
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
		break;
	case 0x4000000:
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
		break;
	case 0x8000000:
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
		break;
	case 0x0000001:
		/* PLX */
		OCD_WRITE(RM9000x2_OCD_HTEOI, 0x20);
		OCD_WRITE(IRQ_CLEAR_REG, IRQ_ACK_BITS);
		break;
	case 0xf000000:
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
		break;
	}
#endif /* CONFIG_HT_LEVEL_TRIGGER */

	do_IRQ(irq, regs);
}

asmlinkage void do_extended_irq(struct pt_regs *regs)
{
	unsigned int intcontrol = read_c0_intcontrol();
	unsigned int cause = read_c0_cause();
	unsigned int status = read_c0_status();
	unsigned int pending_sr, pending_ic;

	pending_sr = status & cause & 0xff00;
	pending_ic = (cause >> 8) & intcontrol & 0xff00;

	if (pending_ic & (1 << 13))
		do_IRQ(13, regs);

}

#ifdef CONFIG_KGDB
extern void init_second_port(void);
#endif

/*
 * Initialize the next level interrupt handler
 */
void __init arch_init_irq(void)
{
	clear_c0_status(ST0_IM);

	set_except_vector(0, titan_handle_int);
	mips_cpu_irq_init(0);
	rm7k_cpu_irq_init(8);
	rm9k_cpu_irq_init(12);

#ifdef CONFIG_KGDB
	/* At this point, initialize the second serial port */
	init_second_port();
#endif

#ifdef CONFIG_GDB_CONSOLE
	register_gdb_console();
#endif
}

#ifdef CONFIG_KGDB
/*
 * The 16550 DUART has two ports, but is allocated one IRQ
 * for the serial console. Hence, a generic framework for
 * serial IRQ routing in place. Currently, just calls the
 * do_IRQ fuction. But, going in the future, need to check
 * DUART registers for channel A and B, then decide the
 * appropriate action
 */
asmlinkage void yosemite_kgdb_irq(int irq, struct pt_regs *regs)
{
	do_IRQ(irq, regs);
}
#endif