Arvid Brodin | f421436 | 2013-10-30 21:10:47 +0100 | [diff] [blame] | 1 | /* Copyright 2011-2013 Autronica Fire and Security AS |
| 2 | * |
| 3 | * This program is free software; you can redistribute it and/or modify it |
| 4 | * under the terms of the GNU General Public License as published by the Free |
| 5 | * Software Foundation; either version 2 of the License, or (at your option) |
| 6 | * any later version. |
| 7 | * |
| 8 | * Author(s): |
| 9 | * 2011-2013 Arvid Brodin, arvid.brodin@xdin.com |
| 10 | * |
| 11 | * This file contains device methods for creating, using and destroying |
| 12 | * virtual HSR devices. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/netdevice.h> |
| 16 | #include <linux/skbuff.h> |
| 17 | #include <linux/etherdevice.h> |
| 18 | #include <linux/if_arp.h> |
| 19 | #include <linux/rtnetlink.h> |
| 20 | #include <linux/pkt_sched.h> |
| 21 | #include "hsr_device.h" |
| 22 | #include "hsr_framereg.h" |
| 23 | #include "hsr_main.h" |
| 24 | |
| 25 | |
| 26 | static bool is_admin_up(struct net_device *dev) |
| 27 | { |
| 28 | return dev && (dev->flags & IFF_UP); |
| 29 | } |
| 30 | |
| 31 | static bool is_slave_up(struct net_device *dev) |
| 32 | { |
| 33 | return dev && is_admin_up(dev) && netif_oper_up(dev); |
| 34 | } |
| 35 | |
| 36 | static void __hsr_set_operstate(struct net_device *dev, int transition) |
| 37 | { |
| 38 | write_lock_bh(&dev_base_lock); |
| 39 | if (dev->operstate != transition) { |
| 40 | dev->operstate = transition; |
| 41 | write_unlock_bh(&dev_base_lock); |
| 42 | netdev_state_change(dev); |
| 43 | } else { |
| 44 | write_unlock_bh(&dev_base_lock); |
| 45 | } |
| 46 | } |
| 47 | |
| 48 | void hsr_set_operstate(struct net_device *hsr_dev, struct net_device *slave1, |
| 49 | struct net_device *slave2) |
| 50 | { |
| 51 | if (!is_admin_up(hsr_dev)) { |
| 52 | __hsr_set_operstate(hsr_dev, IF_OPER_DOWN); |
| 53 | return; |
| 54 | } |
| 55 | |
| 56 | if (is_slave_up(slave1) || is_slave_up(slave2)) |
| 57 | __hsr_set_operstate(hsr_dev, IF_OPER_UP); |
| 58 | else |
| 59 | __hsr_set_operstate(hsr_dev, IF_OPER_LOWERLAYERDOWN); |
| 60 | } |
| 61 | |
| 62 | void hsr_set_carrier(struct net_device *hsr_dev, struct net_device *slave1, |
| 63 | struct net_device *slave2) |
| 64 | { |
| 65 | if (is_slave_up(slave1) || is_slave_up(slave2)) |
| 66 | netif_carrier_on(hsr_dev); |
| 67 | else |
| 68 | netif_carrier_off(hsr_dev); |
| 69 | } |
| 70 | |
| 71 | |
| 72 | void hsr_check_announce(struct net_device *hsr_dev, int old_operstate) |
| 73 | { |
| 74 | struct hsr_priv *hsr_priv; |
| 75 | |
| 76 | hsr_priv = netdev_priv(hsr_dev); |
| 77 | |
| 78 | if ((hsr_dev->operstate == IF_OPER_UP) && (old_operstate != IF_OPER_UP)) { |
| 79 | /* Went up */ |
| 80 | hsr_priv->announce_count = 0; |
| 81 | hsr_priv->announce_timer.expires = jiffies + |
| 82 | msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL); |
| 83 | add_timer(&hsr_priv->announce_timer); |
| 84 | } |
| 85 | |
| 86 | if ((hsr_dev->operstate != IF_OPER_UP) && (old_operstate == IF_OPER_UP)) |
| 87 | /* Went down */ |
| 88 | del_timer(&hsr_priv->announce_timer); |
| 89 | } |
| 90 | |
| 91 | |
| 92 | int hsr_get_max_mtu(struct hsr_priv *hsr_priv) |
| 93 | { |
| 94 | int mtu_max; |
| 95 | |
| 96 | if (hsr_priv->slave[0] && hsr_priv->slave[1]) |
| 97 | mtu_max = min(hsr_priv->slave[0]->mtu, hsr_priv->slave[1]->mtu); |
| 98 | else if (hsr_priv->slave[0]) |
| 99 | mtu_max = hsr_priv->slave[0]->mtu; |
| 100 | else if (hsr_priv->slave[1]) |
| 101 | mtu_max = hsr_priv->slave[1]->mtu; |
| 102 | else |
| 103 | mtu_max = HSR_TAGLEN; |
| 104 | |
| 105 | return mtu_max - HSR_TAGLEN; |
| 106 | } |
| 107 | |
| 108 | static int hsr_dev_change_mtu(struct net_device *dev, int new_mtu) |
| 109 | { |
| 110 | struct hsr_priv *hsr_priv; |
| 111 | |
| 112 | hsr_priv = netdev_priv(dev); |
| 113 | |
| 114 | if (new_mtu > hsr_get_max_mtu(hsr_priv)) { |
| 115 | netdev_info(hsr_priv->dev, "A HSR master's MTU cannot be greater than the smallest MTU of its slaves minus the HSR Tag length (%d octets).\n", |
| 116 | HSR_TAGLEN); |
| 117 | return -EINVAL; |
| 118 | } |
| 119 | |
| 120 | dev->mtu = new_mtu; |
| 121 | |
| 122 | return 0; |
| 123 | } |
| 124 | |
| 125 | static int hsr_dev_open(struct net_device *dev) |
| 126 | { |
| 127 | struct hsr_priv *hsr_priv; |
| 128 | int i; |
| 129 | char *slave_name; |
| 130 | |
| 131 | hsr_priv = netdev_priv(dev); |
| 132 | |
| 133 | for (i = 0; i < HSR_MAX_SLAVE; i++) { |
| 134 | if (hsr_priv->slave[i]) |
| 135 | slave_name = hsr_priv->slave[i]->name; |
| 136 | else |
| 137 | slave_name = "null"; |
| 138 | |
| 139 | if (!is_slave_up(hsr_priv->slave[i])) |
| 140 | netdev_warn(dev, "Slave %c (%s) is not up; please bring it up to get a working HSR network\n", |
| 141 | 'A' + i, slave_name); |
| 142 | } |
| 143 | |
| 144 | return 0; |
| 145 | } |
| 146 | |
| 147 | static int hsr_dev_close(struct net_device *dev) |
| 148 | { |
| 149 | /* Nothing to do here. We could try to restore the state of the slaves |
| 150 | * to what they were before being changed by the hsr master dev's state, |
| 151 | * but they might have been changed manually in the mean time too, so |
| 152 | * taking them up or down here might be confusing and is probably not a |
| 153 | * good idea. |
| 154 | */ |
| 155 | return 0; |
| 156 | } |
| 157 | |
| 158 | |
| 159 | static void hsr_fill_tag(struct hsr_ethhdr *hsr_ethhdr, struct hsr_priv *hsr_priv) |
| 160 | { |
| 161 | unsigned long irqflags; |
| 162 | |
| 163 | /* IEC 62439-1:2010, p 48, says the 4-bit "path" field can take values |
| 164 | * between 0001-1001 ("ring identifier", for regular HSR frames), |
| 165 | * or 1111 ("HSR management", supervision frames). Unfortunately, the |
| 166 | * spec writers forgot to explain what a "ring identifier" is, or |
| 167 | * how it is used. So we just set this to 0001 for regular frames, |
| 168 | * and 1111 for supervision frames. |
| 169 | */ |
| 170 | set_hsr_tag_path(&hsr_ethhdr->hsr_tag, 0x1); |
| 171 | |
| 172 | /* IEC 62439-1:2010, p 12: "The link service data unit in an Ethernet |
| 173 | * frame is the content of the frame located between the Length/Type |
| 174 | * field and the Frame Check Sequence." |
| 175 | * |
| 176 | * IEC 62439-3, p 48, specifies the "original LPDU" to include the |
| 177 | * original "LT" field (what "LT" means is not explained anywhere as |
| 178 | * far as I can see - perhaps "Length/Type"?). So LSDU_size might |
| 179 | * equal original length + 2. |
| 180 | * Also, the fact that this field is not used anywhere (might be used |
| 181 | * by a RedBox connecting HSR and PRP nets?) means I cannot test its |
| 182 | * correctness. Instead of guessing, I set this to 0 here, to make any |
| 183 | * problems immediately apparent. Anyone using this driver with PRP/HSR |
| 184 | * RedBoxes might need to fix this... |
| 185 | */ |
| 186 | set_hsr_tag_LSDU_size(&hsr_ethhdr->hsr_tag, 0); |
| 187 | |
| 188 | spin_lock_irqsave(&hsr_priv->seqnr_lock, irqflags); |
| 189 | hsr_ethhdr->hsr_tag.sequence_nr = htons(hsr_priv->sequence_nr); |
| 190 | hsr_priv->sequence_nr++; |
| 191 | spin_unlock_irqrestore(&hsr_priv->seqnr_lock, irqflags); |
| 192 | |
| 193 | hsr_ethhdr->hsr_tag.encap_proto = hsr_ethhdr->ethhdr.h_proto; |
| 194 | |
| 195 | hsr_ethhdr->ethhdr.h_proto = htons(ETH_P_PRP); |
| 196 | } |
| 197 | |
| 198 | static int slave_xmit(struct sk_buff *skb, struct hsr_priv *hsr_priv, |
| 199 | enum hsr_dev_idx dev_idx) |
| 200 | { |
| 201 | struct hsr_ethhdr *hsr_ethhdr; |
| 202 | |
| 203 | hsr_ethhdr = (struct hsr_ethhdr *) skb->data; |
| 204 | |
| 205 | skb->dev = hsr_priv->slave[dev_idx]; |
| 206 | |
| 207 | hsr_addr_subst_dest(hsr_priv, &hsr_ethhdr->ethhdr, dev_idx); |
| 208 | |
| 209 | /* Address substitution (IEC62439-3 pp 26, 50): replace mac |
| 210 | * address of outgoing frame with that of the outgoing slave's. |
| 211 | */ |
| 212 | memcpy(hsr_ethhdr->ethhdr.h_source, skb->dev->dev_addr, ETH_ALEN); |
| 213 | |
| 214 | return dev_queue_xmit(skb); |
| 215 | } |
| 216 | |
| 217 | |
| 218 | static int hsr_dev_xmit(struct sk_buff *skb, struct net_device *dev) |
| 219 | { |
| 220 | struct hsr_priv *hsr_priv; |
| 221 | struct hsr_ethhdr *hsr_ethhdr; |
| 222 | struct sk_buff *skb2; |
| 223 | int res1, res2; |
| 224 | |
| 225 | hsr_priv = netdev_priv(dev); |
| 226 | hsr_ethhdr = (struct hsr_ethhdr *) skb->data; |
| 227 | |
| 228 | if ((skb->protocol != htons(ETH_P_PRP)) || |
| 229 | (hsr_ethhdr->ethhdr.h_proto != htons(ETH_P_PRP))) { |
| 230 | hsr_fill_tag(hsr_ethhdr, hsr_priv); |
| 231 | skb->protocol = htons(ETH_P_PRP); |
| 232 | } |
| 233 | |
| 234 | skb2 = pskb_copy(skb, GFP_ATOMIC); |
| 235 | |
| 236 | res1 = NET_XMIT_DROP; |
| 237 | if (likely(hsr_priv->slave[HSR_DEV_SLAVE_A])) |
| 238 | res1 = slave_xmit(skb, hsr_priv, HSR_DEV_SLAVE_A); |
| 239 | |
| 240 | res2 = NET_XMIT_DROP; |
| 241 | if (likely(skb2 && hsr_priv->slave[HSR_DEV_SLAVE_B])) |
| 242 | res2 = slave_xmit(skb2, hsr_priv, HSR_DEV_SLAVE_B); |
| 243 | |
| 244 | if (likely(res1 == NET_XMIT_SUCCESS || res1 == NET_XMIT_CN || |
| 245 | res2 == NET_XMIT_SUCCESS || res2 == NET_XMIT_CN)) { |
| 246 | hsr_priv->dev->stats.tx_packets++; |
| 247 | hsr_priv->dev->stats.tx_bytes += skb->len; |
| 248 | } else { |
| 249 | hsr_priv->dev->stats.tx_dropped++; |
| 250 | } |
| 251 | |
| 252 | return NETDEV_TX_OK; |
| 253 | } |
| 254 | |
| 255 | |
| 256 | static int hsr_header_create(struct sk_buff *skb, struct net_device *dev, |
| 257 | unsigned short type, const void *daddr, |
| 258 | const void *saddr, unsigned int len) |
| 259 | { |
| 260 | int res; |
| 261 | |
| 262 | /* Make room for the HSR tag now. We will fill it in later (in |
| 263 | * hsr_dev_xmit) |
| 264 | */ |
| 265 | if (skb_headroom(skb) < HSR_TAGLEN + ETH_HLEN) |
| 266 | return -ENOBUFS; |
| 267 | skb_push(skb, HSR_TAGLEN); |
| 268 | |
| 269 | /* To allow VLAN/HSR combos we should probably use |
| 270 | * res = dev_hard_header(skb, dev, type, daddr, saddr, len + HSR_TAGLEN); |
| 271 | * here instead. It would require other changes too, though - e.g. |
| 272 | * separate headers for each slave etc... |
| 273 | */ |
| 274 | res = eth_header(skb, dev, type, daddr, saddr, len + HSR_TAGLEN); |
| 275 | if (res <= 0) |
| 276 | return res; |
| 277 | skb_reset_mac_header(skb); |
| 278 | |
| 279 | return res + HSR_TAGLEN; |
| 280 | } |
| 281 | |
| 282 | |
| 283 | static const struct header_ops hsr_header_ops = { |
| 284 | .create = hsr_header_create, |
| 285 | .parse = eth_header_parse, |
| 286 | }; |
| 287 | |
| 288 | |
| 289 | /* HSR:2010 supervision frames should be padded so that the whole frame, |
| 290 | * including headers and FCS, is 64 bytes (without VLAN). |
| 291 | */ |
| 292 | static int hsr_pad(int size) |
| 293 | { |
| 294 | const int min_size = ETH_ZLEN - HSR_TAGLEN - ETH_HLEN; |
| 295 | |
| 296 | if (size >= min_size) |
| 297 | return size; |
| 298 | return min_size; |
| 299 | } |
| 300 | |
| 301 | static void send_hsr_supervision_frame(struct net_device *hsr_dev, u8 type) |
| 302 | { |
| 303 | struct hsr_priv *hsr_priv; |
| 304 | struct sk_buff *skb; |
| 305 | int hlen, tlen; |
| 306 | struct hsr_sup_tag *hsr_stag; |
| 307 | struct hsr_sup_payload *hsr_sp; |
| 308 | unsigned long irqflags; |
| 309 | |
| 310 | hlen = LL_RESERVED_SPACE(hsr_dev); |
| 311 | tlen = hsr_dev->needed_tailroom; |
| 312 | skb = alloc_skb(hsr_pad(sizeof(struct hsr_sup_payload)) + hlen + tlen, |
| 313 | GFP_ATOMIC); |
| 314 | |
| 315 | if (skb == NULL) |
| 316 | return; |
| 317 | |
| 318 | hsr_priv = netdev_priv(hsr_dev); |
| 319 | |
| 320 | skb_reserve(skb, hlen); |
| 321 | |
| 322 | skb->dev = hsr_dev; |
| 323 | skb->protocol = htons(ETH_P_PRP); |
| 324 | skb->priority = TC_PRIO_CONTROL; |
| 325 | |
| 326 | if (dev_hard_header(skb, skb->dev, ETH_P_PRP, |
| 327 | hsr_priv->sup_multicast_addr, |
| 328 | skb->dev->dev_addr, skb->len) < 0) |
| 329 | goto out; |
| 330 | |
| 331 | skb_pull(skb, sizeof(struct ethhdr)); |
| 332 | hsr_stag = (typeof(hsr_stag)) skb->data; |
| 333 | |
| 334 | set_hsr_stag_path(hsr_stag, 0xf); |
| 335 | set_hsr_stag_HSR_Ver(hsr_stag, 0); |
| 336 | |
| 337 | spin_lock_irqsave(&hsr_priv->seqnr_lock, irqflags); |
| 338 | hsr_stag->sequence_nr = htons(hsr_priv->sequence_nr); |
| 339 | hsr_priv->sequence_nr++; |
| 340 | spin_unlock_irqrestore(&hsr_priv->seqnr_lock, irqflags); |
| 341 | |
| 342 | hsr_stag->HSR_TLV_Type = type; |
| 343 | hsr_stag->HSR_TLV_Length = 12; |
| 344 | |
| 345 | skb_push(skb, sizeof(struct ethhdr)); |
| 346 | |
| 347 | /* Payload: MacAddressA */ |
| 348 | hsr_sp = (typeof(hsr_sp)) skb_put(skb, sizeof(*hsr_sp)); |
| 349 | memcpy(hsr_sp->MacAddressA, hsr_dev->dev_addr, ETH_ALEN); |
| 350 | |
| 351 | dev_queue_xmit(skb); |
| 352 | return; |
| 353 | |
| 354 | out: |
| 355 | kfree_skb(skb); |
| 356 | } |
| 357 | |
| 358 | |
| 359 | /* Announce (supervision frame) timer function |
| 360 | */ |
| 361 | static void hsr_announce(unsigned long data) |
| 362 | { |
| 363 | struct hsr_priv *hsr_priv; |
| 364 | |
| 365 | hsr_priv = (struct hsr_priv *) data; |
| 366 | |
| 367 | if (hsr_priv->announce_count < 3) { |
| 368 | send_hsr_supervision_frame(hsr_priv->dev, HSR_TLV_ANNOUNCE); |
| 369 | hsr_priv->announce_count++; |
| 370 | } else { |
| 371 | send_hsr_supervision_frame(hsr_priv->dev, HSR_TLV_LIFE_CHECK); |
| 372 | } |
| 373 | |
| 374 | if (hsr_priv->announce_count < 3) |
| 375 | hsr_priv->announce_timer.expires = jiffies + |
| 376 | msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL); |
| 377 | else |
| 378 | hsr_priv->announce_timer.expires = jiffies + |
| 379 | msecs_to_jiffies(HSR_LIFE_CHECK_INTERVAL); |
| 380 | |
| 381 | if (is_admin_up(hsr_priv->dev)) |
| 382 | add_timer(&hsr_priv->announce_timer); |
| 383 | } |
| 384 | |
| 385 | |
| 386 | static void restore_slaves(struct net_device *hsr_dev) |
| 387 | { |
| 388 | struct hsr_priv *hsr_priv; |
| 389 | int i; |
| 390 | int res; |
| 391 | |
| 392 | hsr_priv = netdev_priv(hsr_dev); |
| 393 | |
| 394 | rtnl_lock(); |
| 395 | |
| 396 | /* Restore promiscuity */ |
| 397 | for (i = 0; i < HSR_MAX_SLAVE; i++) { |
| 398 | if (!hsr_priv->slave[i]) |
| 399 | continue; |
| 400 | res = dev_set_promiscuity(hsr_priv->slave[i], -1); |
| 401 | if (res) |
| 402 | netdev_info(hsr_dev, |
| 403 | "Cannot restore slave promiscuity (%s, %d)\n", |
| 404 | hsr_priv->slave[i]->name, res); |
| 405 | } |
| 406 | |
| 407 | rtnl_unlock(); |
| 408 | } |
| 409 | |
| 410 | static void reclaim_hsr_dev(struct rcu_head *rh) |
| 411 | { |
| 412 | struct hsr_priv *hsr_priv; |
| 413 | |
| 414 | hsr_priv = container_of(rh, struct hsr_priv, rcu_head); |
| 415 | free_netdev(hsr_priv->dev); |
| 416 | } |
| 417 | |
| 418 | |
| 419 | /* According to comments in the declaration of struct net_device, this function |
| 420 | * is "Called from unregister, can be used to call free_netdev". Ok then... |
| 421 | */ |
| 422 | static void hsr_dev_destroy(struct net_device *hsr_dev) |
| 423 | { |
| 424 | struct hsr_priv *hsr_priv; |
| 425 | |
| 426 | hsr_priv = netdev_priv(hsr_dev); |
| 427 | |
| 428 | del_timer(&hsr_priv->announce_timer); |
| 429 | unregister_hsr_master(hsr_priv); /* calls list_del_rcu on hsr_priv */ |
| 430 | restore_slaves(hsr_dev); |
| 431 | call_rcu(&hsr_priv->rcu_head, reclaim_hsr_dev); /* reclaim hsr_priv */ |
| 432 | } |
| 433 | |
| 434 | static const struct net_device_ops hsr_device_ops = { |
| 435 | .ndo_change_mtu = hsr_dev_change_mtu, |
| 436 | .ndo_open = hsr_dev_open, |
| 437 | .ndo_stop = hsr_dev_close, |
| 438 | .ndo_start_xmit = hsr_dev_xmit, |
| 439 | }; |
| 440 | |
| 441 | |
| 442 | void hsr_dev_setup(struct net_device *dev) |
| 443 | { |
| 444 | random_ether_addr(dev->dev_addr); |
| 445 | |
| 446 | ether_setup(dev); |
| 447 | dev->header_ops = &hsr_header_ops; |
| 448 | dev->netdev_ops = &hsr_device_ops; |
| 449 | dev->tx_queue_len = 0; |
| 450 | |
| 451 | dev->destructor = hsr_dev_destroy; |
| 452 | } |
| 453 | |
| 454 | |
| 455 | /* Return true if dev is a HSR master; return false otherwise. |
| 456 | */ |
| 457 | bool is_hsr_master(struct net_device *dev) |
| 458 | { |
| 459 | return (dev->netdev_ops->ndo_start_xmit == hsr_dev_xmit); |
| 460 | } |
| 461 | |
| 462 | static int check_slave_ok(struct net_device *dev) |
| 463 | { |
| 464 | /* Don't allow HSR on non-ethernet like devices */ |
| 465 | if ((dev->flags & IFF_LOOPBACK) || (dev->type != ARPHRD_ETHER) || |
| 466 | (dev->addr_len != ETH_ALEN)) { |
| 467 | netdev_info(dev, "Cannot use loopback or non-ethernet device as HSR slave.\n"); |
| 468 | return -EINVAL; |
| 469 | } |
| 470 | |
| 471 | /* Don't allow enslaving hsr devices */ |
| 472 | if (is_hsr_master(dev)) { |
| 473 | netdev_info(dev, "Cannot create trees of HSR devices.\n"); |
| 474 | return -EINVAL; |
| 475 | } |
| 476 | |
| 477 | if (is_hsr_slave(dev)) { |
| 478 | netdev_info(dev, "This device is already a HSR slave.\n"); |
| 479 | return -EINVAL; |
| 480 | } |
| 481 | |
| 482 | if (dev->priv_flags & IFF_802_1Q_VLAN) { |
| 483 | netdev_info(dev, "HSR on top of VLAN is not yet supported in this driver.\n"); |
| 484 | return -EINVAL; |
| 485 | } |
| 486 | |
| 487 | /* HSR over bonded devices has not been tested, but I'm not sure it |
| 488 | * won't work... |
| 489 | */ |
| 490 | |
| 491 | return 0; |
| 492 | } |
| 493 | |
| 494 | |
| 495 | /* Default multicast address for HSR Supervision frames */ |
| 496 | static const unsigned char def_multicast_addr[ETH_ALEN] = { |
| 497 | 0x01, 0x15, 0x4e, 0x00, 0x01, 0x00 |
| 498 | }; |
| 499 | |
| 500 | int hsr_dev_finalize(struct net_device *hsr_dev, struct net_device *slave[2], |
| 501 | unsigned char multicast_spec) |
| 502 | { |
| 503 | struct hsr_priv *hsr_priv; |
| 504 | int i; |
| 505 | int res; |
| 506 | |
| 507 | hsr_priv = netdev_priv(hsr_dev); |
| 508 | hsr_priv->dev = hsr_dev; |
| 509 | INIT_LIST_HEAD(&hsr_priv->node_db); |
| 510 | INIT_LIST_HEAD(&hsr_priv->self_node_db); |
| 511 | for (i = 0; i < HSR_MAX_SLAVE; i++) |
| 512 | hsr_priv->slave[i] = slave[i]; |
| 513 | |
| 514 | spin_lock_init(&hsr_priv->seqnr_lock); |
| 515 | /* Overflow soon to find bugs easier: */ |
| 516 | hsr_priv->sequence_nr = USHRT_MAX - 1024; |
| 517 | |
| 518 | init_timer(&hsr_priv->announce_timer); |
| 519 | hsr_priv->announce_timer.function = hsr_announce; |
| 520 | hsr_priv->announce_timer.data = (unsigned long) hsr_priv; |
| 521 | |
| 522 | memcpy(hsr_priv->sup_multicast_addr, def_multicast_addr, ETH_ALEN); |
| 523 | hsr_priv->sup_multicast_addr[ETH_ALEN - 1] = multicast_spec; |
| 524 | |
| 525 | /* FIXME: should I modify the value of these? |
| 526 | * |
| 527 | * - hsr_dev->flags - i.e. |
| 528 | * IFF_MASTER/SLAVE? |
| 529 | * - hsr_dev->priv_flags - i.e. |
| 530 | * IFF_EBRIDGE? |
| 531 | * IFF_TX_SKB_SHARING? |
| 532 | * IFF_HSR_MASTER/SLAVE? |
| 533 | */ |
| 534 | |
| 535 | for (i = 0; i < HSR_MAX_SLAVE; i++) { |
| 536 | res = check_slave_ok(slave[i]); |
| 537 | if (res) |
| 538 | return res; |
| 539 | } |
| 540 | |
| 541 | hsr_dev->features = slave[0]->features & slave[1]->features; |
| 542 | /* Prevent recursive tx locking */ |
| 543 | hsr_dev->features |= NETIF_F_LLTX; |
| 544 | /* VLAN on top of HSR needs testing and probably some work on |
| 545 | * hsr_header_create() etc. |
| 546 | */ |
| 547 | hsr_dev->features |= NETIF_F_VLAN_CHALLENGED; |
| 548 | |
| 549 | /* Set hsr_dev's MAC address to that of mac_slave1 */ |
| 550 | memcpy(hsr_dev->dev_addr, hsr_priv->slave[0]->dev_addr, ETH_ALEN); |
| 551 | |
| 552 | /* Set required header length */ |
| 553 | for (i = 0; i < HSR_MAX_SLAVE; i++) { |
| 554 | if (slave[i]->hard_header_len + HSR_TAGLEN > |
| 555 | hsr_dev->hard_header_len) |
| 556 | hsr_dev->hard_header_len = |
| 557 | slave[i]->hard_header_len + HSR_TAGLEN; |
| 558 | } |
| 559 | |
| 560 | /* MTU */ |
| 561 | for (i = 0; i < HSR_MAX_SLAVE; i++) |
| 562 | if (slave[i]->mtu - HSR_TAGLEN < hsr_dev->mtu) |
| 563 | hsr_dev->mtu = slave[i]->mtu - HSR_TAGLEN; |
| 564 | |
| 565 | /* Make sure the 1st call to netif_carrier_on() gets through */ |
| 566 | netif_carrier_off(hsr_dev); |
| 567 | |
| 568 | /* Promiscuity */ |
| 569 | for (i = 0; i < HSR_MAX_SLAVE; i++) { |
| 570 | res = dev_set_promiscuity(slave[i], 1); |
| 571 | if (res) { |
| 572 | netdev_info(hsr_dev, "Cannot set slave promiscuity (%s, %d)\n", |
| 573 | slave[i]->name, res); |
| 574 | goto fail; |
| 575 | } |
| 576 | } |
| 577 | |
| 578 | /* Make sure we recognize frames from ourselves in hsr_rcv() */ |
| 579 | res = hsr_create_self_node(&hsr_priv->self_node_db, |
| 580 | hsr_dev->dev_addr, |
| 581 | hsr_priv->slave[1]->dev_addr); |
| 582 | if (res < 0) |
| 583 | goto fail; |
| 584 | |
| 585 | res = register_netdevice(hsr_dev); |
| 586 | if (res) |
| 587 | goto fail; |
| 588 | |
| 589 | register_hsr_master(hsr_priv); |
| 590 | |
| 591 | return 0; |
| 592 | |
| 593 | fail: |
| 594 | restore_slaves(hsr_dev); |
| 595 | return res; |
| 596 | } |