blob: a159957e167b158e85ca3ebbced142d6690e2d53 [file] [log] [blame]
Doug Thompsoncfe40fd2009-05-04 19:25:34 +02001/*
2 * AMD64 class Memory Controller kernel module
3 *
4 * Copyright (c) 2009 SoftwareBitMaker.
5 * Copyright (c) 2009 Advanced Micro Devices, Inc.
6 *
7 * This file may be distributed under the terms of the
8 * GNU General Public License.
9 *
10 * Originally Written by Thayne Harbaugh
11 *
12 * Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
13 * - K8 CPU Revision D and greater support
14 *
15 * Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>:
16 * - Module largely rewritten, with new (and hopefully correct)
17 * code for dealing with node and chip select interleaving,
18 * various code cleanup, and bug fixes
19 * - Added support for memory hoisting using DRAM hole address
20 * register
21 *
22 * Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
23 * -K8 Rev (1207) revision support added, required Revision
24 * specific mini-driver code to support Rev F as well as
25 * prior revisions
26 *
27 * Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
28 * -Family 10h revision support added. New PCI Device IDs,
29 * indicating new changes. Actual registers modified
30 * were slight, less than the Rev E to Rev F transition
31 * but changing the PCI Device ID was the proper thing to
32 * do, as it provides for almost automactic family
33 * detection. The mods to Rev F required more family
34 * information detection.
35 *
36 * Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
37 * - misc fixes and code cleanups
38 *
39 * This module is based on the following documents
40 * (available from http://www.amd.com/):
41 *
42 * Title: BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
43 * Opteron Processors
44 * AMD publication #: 26094
45 *` Revision: 3.26
46 *
47 * Title: BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
48 * Processors
49 * AMD publication #: 32559
50 * Revision: 3.00
51 * Issue Date: May 2006
52 *
53 * Title: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
54 * Processors
55 * AMD publication #: 31116
56 * Revision: 3.00
57 * Issue Date: September 07, 2007
58 *
59 * Sections in the first 2 documents are no longer in sync with each other.
60 * The Family 10h BKDG was totally re-written from scratch with a new
61 * presentation model.
62 * Therefore, comments that refer to a Document section might be off.
63 */
64
65#include <linux/module.h>
66#include <linux/ctype.h>
67#include <linux/init.h>
68#include <linux/pci.h>
69#include <linux/pci_ids.h>
70#include <linux/slab.h>
71#include <linux/mmzone.h>
72#include <linux/edac.h>
Doug Thompsonf9431992009-04-27 19:46:08 +020073#include <asm/msr.h>
Doug Thompsoncfe40fd2009-05-04 19:25:34 +020074#include "edac_core.h"
75
76#define amd64_printk(level, fmt, arg...) \
77 edac_printk(level, "amd64", fmt, ##arg)
78
79#define amd64_mc_printk(mci, level, fmt, arg...) \
80 edac_mc_chipset_printk(mci, level, "amd64", fmt, ##arg)
81
82/*
83 * Throughout the comments in this code, the following terms are used:
84 *
85 * SysAddr, DramAddr, and InputAddr
86 *
87 * These terms come directly from the amd64 documentation
88 * (AMD publication #26094). They are defined as follows:
89 *
90 * SysAddr:
91 * This is a physical address generated by a CPU core or a device
92 * doing DMA. If generated by a CPU core, a SysAddr is the result of
93 * a virtual to physical address translation by the CPU core's address
94 * translation mechanism (MMU).
95 *
96 * DramAddr:
97 * A DramAddr is derived from a SysAddr by subtracting an offset that
98 * depends on which node the SysAddr maps to and whether the SysAddr
99 * is within a range affected by memory hoisting. The DRAM Base
100 * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
101 * determine which node a SysAddr maps to.
102 *
103 * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
104 * is within the range of addresses specified by this register, then
105 * a value x from the DHAR is subtracted from the SysAddr to produce a
106 * DramAddr. Here, x represents the base address for the node that
107 * the SysAddr maps to plus an offset due to memory hoisting. See
108 * section 3.4.8 and the comments in amd64_get_dram_hole_info() and
109 * sys_addr_to_dram_addr() below for more information.
110 *
111 * If the SysAddr is not affected by the DHAR then a value y is
112 * subtracted from the SysAddr to produce a DramAddr. Here, y is the
113 * base address for the node that the SysAddr maps to. See section
114 * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more
115 * information.
116 *
117 * InputAddr:
118 * A DramAddr is translated to an InputAddr before being passed to the
119 * memory controller for the node that the DramAddr is associated
120 * with. The memory controller then maps the InputAddr to a csrow.
121 * If node interleaving is not in use, then the InputAddr has the same
122 * value as the DramAddr. Otherwise, the InputAddr is produced by
123 * discarding the bits used for node interleaving from the DramAddr.
124 * See section 3.4.4 for more information.
125 *
126 * The memory controller for a given node uses its DRAM CS Base and
127 * DRAM CS Mask registers to map an InputAddr to a csrow. See
128 * sections 3.5.4 and 3.5.5 for more information.
129 */
130
131#define EDAC_AMD64_VERSION " Ver: 3.2.0 " __DATE__
132#define EDAC_MOD_STR "amd64_edac"
133
134/* Extended Model from CPUID, for CPU Revision numbers */
135#define OPTERON_CPU_LE_REV_C 0
136#define OPTERON_CPU_REV_D 1
137#define OPTERON_CPU_REV_E 2
138
139/* NPT processors have the following Extended Models */
140#define OPTERON_CPU_REV_F 4
141#define OPTERON_CPU_REV_FA 5
142
143/* Hardware limit on ChipSelect rows per MC and processors per system */
144#define CHIPSELECT_COUNT 8
145#define DRAM_REG_COUNT 8
146
147
148/*
149 * PCI-defined configuration space registers
150 */
151
152
153/*
154 * Function 1 - Address Map
155 */
156#define K8_DRAM_BASE_LOW 0x40
157#define K8_DRAM_LIMIT_LOW 0x44
158#define K8_DHAR 0xf0
159
160#define DHAR_VALID BIT(0)
161#define F10_DRAM_MEM_HOIST_VALID BIT(1)
162
163#define DHAR_BASE_MASK 0xff000000
164#define dhar_base(dhar) (dhar & DHAR_BASE_MASK)
165
166#define K8_DHAR_OFFSET_MASK 0x0000ff00
167#define k8_dhar_offset(dhar) ((dhar & K8_DHAR_OFFSET_MASK) << 16)
168
169#define F10_DHAR_OFFSET_MASK 0x0000ff80
170 /* NOTE: Extra mask bit vs K8 */
171#define f10_dhar_offset(dhar) ((dhar & F10_DHAR_OFFSET_MASK) << 16)
172
173
174/* F10 High BASE/LIMIT registers */
175#define F10_DRAM_BASE_HIGH 0x140
176#define F10_DRAM_LIMIT_HIGH 0x144
177
178
179/*
180 * Function 2 - DRAM controller
181 */
182#define K8_DCSB0 0x40
183#define F10_DCSB1 0x140
184
185#define K8_DCSB_CS_ENABLE BIT(0)
186#define K8_DCSB_NPT_SPARE BIT(1)
187#define K8_DCSB_NPT_TESTFAIL BIT(2)
188
189/*
190 * REV E: select [31:21] and [15:9] from DCSB and the shift amount to form
191 * the address
192 */
193#define REV_E_DCSB_BASE_BITS (0xFFE0FE00ULL)
194#define REV_E_DCS_SHIFT 4
195#define REV_E_DCSM_COUNT 8
196
197#define REV_F_F1Xh_DCSB_BASE_BITS (0x1FF83FE0ULL)
198#define REV_F_F1Xh_DCS_SHIFT 8
199
200/*
201 * REV F and later: selects [28:19] and [13:5] from DCSB and the shift amount
202 * to form the address
203 */
204#define REV_F_DCSB_BASE_BITS (0x1FF83FE0ULL)
205#define REV_F_DCS_SHIFT 8
206#define REV_F_DCSM_COUNT 4
207#define F10_DCSM_COUNT 4
208#define F11_DCSM_COUNT 2
209
210/* DRAM CS Mask Registers */
211#define K8_DCSM0 0x60
212#define F10_DCSM1 0x160
213
214/* REV E: select [29:21] and [15:9] from DCSM */
215#define REV_E_DCSM_MASK_BITS 0x3FE0FE00
216
217/* unused bits [24:20] and [12:0] */
218#define REV_E_DCS_NOTUSED_BITS 0x01F01FFF
219
220/* REV F and later: select [28:19] and [13:5] from DCSM */
221#define REV_F_F1Xh_DCSM_MASK_BITS 0x1FF83FE0
222
223/* unused bits [26:22] and [12:0] */
224#define REV_F_F1Xh_DCS_NOTUSED_BITS 0x07C01FFF
225
226#define DBAM0 0x80
227#define DBAM1 0x180
228
229/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
230#define DBAM_DIMM(i, reg) ((((reg) >> (4*i))) & 0xF)
231
232#define DBAM_MAX_VALUE 11
233
234
235#define F10_DCLR_0 0x90
236#define F10_DCLR_1 0x190
237#define REVE_WIDTH_128 BIT(16)
238#define F10_WIDTH_128 BIT(11)
239
240
241#define F10_DCHR_0 0x94
242#define F10_DCHR_1 0x194
243
244#define F10_DCHR_FOUR_RANK_DIMM BIT(18)
245#define F10_DCHR_Ddr3Mode BIT(8)
246#define F10_DCHR_MblMode BIT(6)
247
248
249#define F10_DCTL_SEL_LOW 0x110
250
251#define dct_sel_baseaddr(pvt) \
252 ((pvt->dram_ctl_select_low) & 0xFFFFF800)
253
254#define dct_sel_interleave_addr(pvt) \
255 (((pvt->dram_ctl_select_low) >> 6) & 0x3)
256
257enum {
258 F10_DCTL_SEL_LOW_DctSelHiRngEn = BIT(0),
259 F10_DCTL_SEL_LOW_DctSelIntLvEn = BIT(2),
260 F10_DCTL_SEL_LOW_DctGangEn = BIT(4),
261 F10_DCTL_SEL_LOW_DctDatIntLv = BIT(5),
262 F10_DCTL_SEL_LOW_DramEnable = BIT(8),
263 F10_DCTL_SEL_LOW_MemCleared = BIT(10),
264};
265
266#define dct_high_range_enabled(pvt) \
267 (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)
268
269#define dct_interleave_enabled(pvt) \
270 (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)
271
272#define dct_ganging_enabled(pvt) \
273 (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)
274
275#define dct_data_intlv_enabled(pvt) \
276 (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)
277
278#define dct_dram_enabled(pvt) \
279 (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)
280
281#define dct_memory_cleared(pvt) \
282 (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)
283
284
285#define F10_DCTL_SEL_HIGH 0x114
286
287
288/*
289 * Function 3 - Misc Control
290 */
291#define K8_NBCTL 0x40
292
293/* Correctable ECC error reporting enable */
294#define K8_NBCTL_CECCEn BIT(0)
295
296/* UnCorrectable ECC error reporting enable */
297#define K8_NBCTL_UECCEn BIT(1)
298
299#define K8_NBCFG 0x44
300#define K8_NBCFG_CHIPKILL BIT(23)
301#define K8_NBCFG_ECC_ENABLE BIT(22)
302
303#define K8_NBSL 0x48
304
305
306#define EXTRACT_HIGH_SYNDROME(x) (((x) >> 24) & 0xff)
307#define EXTRACT_EXT_ERROR_CODE(x) (((x) >> 16) & 0x1f)
308
309/* Family F10h: Normalized Extended Error Codes */
310#define F10_NBSL_EXT_ERR_RES 0x0
311#define F10_NBSL_EXT_ERR_CRC 0x1
312#define F10_NBSL_EXT_ERR_SYNC 0x2
313#define F10_NBSL_EXT_ERR_MST 0x3
314#define F10_NBSL_EXT_ERR_TGT 0x4
315#define F10_NBSL_EXT_ERR_GART 0x5
316#define F10_NBSL_EXT_ERR_RMW 0x6
317#define F10_NBSL_EXT_ERR_WDT 0x7
318#define F10_NBSL_EXT_ERR_ECC 0x8
319#define F10_NBSL_EXT_ERR_DEV 0x9
320#define F10_NBSL_EXT_ERR_LINK_DATA 0xA
321
322/* Next two are overloaded values */
323#define F10_NBSL_EXT_ERR_LINK_PROTO 0xB
324#define F10_NBSL_EXT_ERR_L3_PROTO 0xB
325
326#define F10_NBSL_EXT_ERR_NB_ARRAY 0xC
327#define F10_NBSL_EXT_ERR_DRAM_PARITY 0xD
328#define F10_NBSL_EXT_ERR_LINK_RETRY 0xE
329
330/* Next two are overloaded values */
331#define F10_NBSL_EXT_ERR_GART_WALK 0xF
332#define F10_NBSL_EXT_ERR_DEV_WALK 0xF
333
334/* 0x10 to 0x1B: Reserved */
335#define F10_NBSL_EXT_ERR_L3_DATA 0x1C
336#define F10_NBSL_EXT_ERR_L3_TAG 0x1D
337#define F10_NBSL_EXT_ERR_L3_LRU 0x1E
338
339/* K8: Normalized Extended Error Codes */
340#define K8_NBSL_EXT_ERR_ECC 0x0
341#define K8_NBSL_EXT_ERR_CRC 0x1
342#define K8_NBSL_EXT_ERR_SYNC 0x2
343#define K8_NBSL_EXT_ERR_MST 0x3
344#define K8_NBSL_EXT_ERR_TGT 0x4
345#define K8_NBSL_EXT_ERR_GART 0x5
346#define K8_NBSL_EXT_ERR_RMW 0x6
347#define K8_NBSL_EXT_ERR_WDT 0x7
348#define K8_NBSL_EXT_ERR_CHIPKILL_ECC 0x8
349#define K8_NBSL_EXT_ERR_DRAM_PARITY 0xD
350
351#define EXTRACT_ERROR_CODE(x) ((x) & 0xffff)
352#define TEST_TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010)
353#define TEST_MEM_ERROR(x) (((x) & 0xFF00) == 0x0100)
354#define TEST_BUS_ERROR(x) (((x) & 0xF800) == 0x0800)
355#define EXTRACT_TT_CODE(x) (((x) >> 2) & 0x3)
356#define EXTRACT_II_CODE(x) (((x) >> 2) & 0x3)
357#define EXTRACT_LL_CODE(x) (((x) >> 0) & 0x3)
358#define EXTRACT_RRRR_CODE(x) (((x) >> 4) & 0xf)
359#define EXTRACT_TO_CODE(x) (((x) >> 8) & 0x1)
360#define EXTRACT_PP_CODE(x) (((x) >> 9) & 0x3)
361
362/*
363 * The following are for BUS type errors AFTER values have been normalized by
364 * shifting right
365 */
366#define K8_NBSL_PP_SRC 0x0
367#define K8_NBSL_PP_RES 0x1
368#define K8_NBSL_PP_OBS 0x2
369#define K8_NBSL_PP_GENERIC 0x3
370
371
372#define K8_NBSH 0x4C
373
374#define K8_NBSH_VALID_BIT BIT(31)
375#define K8_NBSH_OVERFLOW BIT(30)
376#define K8_NBSH_UNCORRECTED_ERR BIT(29)
377#define K8_NBSH_ERR_ENABLE BIT(28)
378#define K8_NBSH_MISC_ERR_VALID BIT(27)
379#define K8_NBSH_VALID_ERROR_ADDR BIT(26)
380#define K8_NBSH_PCC BIT(25)
381#define K8_NBSH_CECC BIT(14)
382#define K8_NBSH_UECC BIT(13)
383#define K8_NBSH_ERR_SCRUBER BIT(8)
384#define K8_NBSH_CORE3 BIT(3)
385#define K8_NBSH_CORE2 BIT(2)
386#define K8_NBSH_CORE1 BIT(1)
387#define K8_NBSH_CORE0 BIT(0)
388
389#define EXTRACT_LDT_LINK(x) (((x) >> 4) & 0x7)
390#define EXTRACT_ERR_CPU_MAP(x) ((x) & 0xF)
391#define EXTRACT_LOW_SYNDROME(x) (((x) >> 15) & 0xff)
392
393
394#define K8_NBEAL 0x50
395#define K8_NBEAH 0x54
396#define K8_SCRCTRL 0x58
397
398#define F10_NB_CFG_LOW 0x88
399#define F10_NB_CFG_LOW_ENABLE_EXT_CFG BIT(14)
400
401#define F10_NB_CFG_HIGH 0x8C
402
403#define F10_ONLINE_SPARE 0xB0
404#define F10_ONLINE_SPARE_SWAPDONE0(x) ((x) & BIT(1))
405#define F10_ONLINE_SPARE_SWAPDONE1(x) ((x) & BIT(3))
406#define F10_ONLINE_SPARE_BADDRAM_CS0(x) (((x) >> 4) & 0x00000007)
407#define F10_ONLINE_SPARE_BADDRAM_CS1(x) (((x) >> 8) & 0x00000007)
408
409#define F10_NB_ARRAY_ADDR 0xB8
410
411#define F10_NB_ARRAY_DRAM_ECC 0x80000000
412
413/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */
414#define SET_NB_ARRAY_ADDRESS(section) (((section) & 0x3) << 1)
415
416#define F10_NB_ARRAY_DATA 0xBC
417
418#define SET_NB_DRAM_INJECTION_WRITE(word, bits) \
419 (BIT(((word) & 0xF) + 20) | \
420 BIT(17) | \
421 ((bits) & 0xF))
422
423#define SET_NB_DRAM_INJECTION_READ(word, bits) \
424 (BIT(((word) & 0xF) + 20) | \
425 BIT(16) | \
426 ((bits) & 0xF))
427
428#define K8_NBCAP 0xE8
429#define K8_NBCAP_CORES (BIT(12)|BIT(13))
430#define K8_NBCAP_CHIPKILL BIT(4)
431#define K8_NBCAP_SECDED BIT(3)
432#define K8_NBCAP_8_NODE BIT(2)
433#define K8_NBCAP_DUAL_NODE BIT(1)
434#define K8_NBCAP_DCT_DUAL BIT(0)
435
436/*
437 * MSR Regs
438 */
439#define K8_MSR_MCGCTL 0x017b
440#define K8_MSR_MCGCTL_NBE BIT(4)
441
442#define K8_MSR_MC4CTL 0x0410
443#define K8_MSR_MC4STAT 0x0411
444#define K8_MSR_MC4ADDR 0x0412
445
446/* AMD sets the first MC device at device ID 0x18. */
447static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
448{
449 return PCI_SLOT(pdev->devfn) - 0x18;
450}
451
452enum amd64_chipset_families {
453 K8_CPUS = 0,
454 F10_CPUS,
455 F11_CPUS,
456};
457
458/*
459 * Structure to hold:
460 *
461 * 1) dynamically read status and error address HW registers
462 * 2) sysfs entered values
463 * 3) MCE values
464 *
465 * Depends on entry into the modules
466 */
467struct amd64_error_info_regs {
468 u32 nbcfg;
469 u32 nbsh;
470 u32 nbsl;
471 u32 nbeah;
472 u32 nbeal;
473};
474
475/* Error injection control structure */
476struct error_injection {
477 u32 section;
478 u32 word;
479 u32 bit_map;
480};
481
482struct amd64_pvt {
483 /* pci_device handles which we utilize */
484 struct pci_dev *addr_f1_ctl;
485 struct pci_dev *dram_f2_ctl;
486 struct pci_dev *misc_f3_ctl;
487
488 int mc_node_id; /* MC index of this MC node */
489 int ext_model; /* extended model value of this node */
490
491 struct low_ops *ops; /* pointer to per PCI Device ID func table */
492
493 int channel_count;
494
495 /* Raw registers */
496 u32 dclr0; /* DRAM Configuration Low DCT0 reg */
497 u32 dclr1; /* DRAM Configuration Low DCT1 reg */
498 u32 dchr0; /* DRAM Configuration High DCT0 reg */
499 u32 dchr1; /* DRAM Configuration High DCT1 reg */
500 u32 nbcap; /* North Bridge Capabilities */
501 u32 nbcfg; /* F10 North Bridge Configuration */
502 u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */
503 u32 dhar; /* DRAM Hoist reg */
504 u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */
505 u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */
506
507 /* DRAM CS Base Address Registers F2x[1,0][5C:40] */
508 u32 dcsb0[CHIPSELECT_COUNT];
509 u32 dcsb1[CHIPSELECT_COUNT];
510
511 /* DRAM CS Mask Registers F2x[1,0][6C:60] */
512 u32 dcsm0[CHIPSELECT_COUNT];
513 u32 dcsm1[CHIPSELECT_COUNT];
514
515 /*
516 * Decoded parts of DRAM BASE and LIMIT Registers
517 * F1x[78,70,68,60,58,50,48,40]
518 */
519 u64 dram_base[DRAM_REG_COUNT];
520 u64 dram_limit[DRAM_REG_COUNT];
521 u8 dram_IntlvSel[DRAM_REG_COUNT];
522 u8 dram_IntlvEn[DRAM_REG_COUNT];
523 u8 dram_DstNode[DRAM_REG_COUNT];
524 u8 dram_rw_en[DRAM_REG_COUNT];
525
526 /*
527 * The following fields are set at (load) run time, after CPU revision
528 * has been determined, since the dct_base and dct_mask registers vary
529 * based on revision
530 */
531 u32 dcsb_base; /* DCSB base bits */
532 u32 dcsm_mask; /* DCSM mask bits */
533 u32 num_dcsm; /* Number of DCSM registers */
534 u32 dcs_mask_notused; /* DCSM notused mask bits */
535 u32 dcs_shift; /* DCSB and DCSM shift value */
536
537 u64 top_mem; /* top of memory below 4GB */
538 u64 top_mem2; /* top of memory above 4GB */
539
540 u32 dram_ctl_select_low; /* DRAM Controller Select Low Reg */
541 u32 dram_ctl_select_high; /* DRAM Controller Select High Reg */
542 u32 online_spare; /* On-Line spare Reg */
543
544 /* temp storage for when input is received from sysfs */
545 struct amd64_error_info_regs ctl_error_info;
546
547 /* place to store error injection parameters prior to issue */
548 struct error_injection injection;
549
550 /* Save old hw registers' values before we modified them */
551 u32 nbctl_mcgctl_saved; /* When true, following 2 are valid */
552 u32 old_nbctl;
Doug Thompsonf9431992009-04-27 19:46:08 +0200553 unsigned long old_mcgctl; /* per core on this node */
Doug Thompsoncfe40fd2009-05-04 19:25:34 +0200554
555 /* MC Type Index value: socket F vs Family 10h */
556 u32 mc_type_index;
557
558 /* misc settings */
559 struct flags {
560 unsigned long cf8_extcfg:1;
561 } flags;
562};
563
564struct scrubrate {
565 u32 scrubval; /* bit pattern for scrub rate */
566 u32 bandwidth; /* bandwidth consumed (bytes/sec) */
567};
568
569extern struct scrubrate scrubrates[23];
570extern u32 revf_quad_ddr2_shift[16];
571extern const char *tt_msgs[4];
572extern const char *ll_msgs[4];
573extern const char *rrrr_msgs[16];
574extern const char *to_msgs[2];
575extern const char *pp_msgs[4];
576extern const char *ii_msgs[4];
577extern const char *ext_msgs[32];
578extern const char *htlink_msgs[8];
579
Doug Thompson7d6034d2009-04-27 20:01:01 +0200580#ifdef CONFIG_EDAC_DEBUG
581#define NUM_DBG_ATTRS 9
582#else
583#define NUM_DBG_ATTRS 0
584#endif
585
586#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
587#define NUM_INJ_ATTRS 5
588#else
589#define NUM_INJ_ATTRS 0
590#endif
591
592extern struct mcidev_sysfs_attribute amd64_dbg_attrs[NUM_DBG_ATTRS],
593 amd64_inj_attrs[NUM_INJ_ATTRS];
594
Doug Thompsoncfe40fd2009-05-04 19:25:34 +0200595/*
596 * Each of the PCI Device IDs types have their own set of hardware accessor
597 * functions and per device encoding/decoding logic.
598 */
599struct low_ops {
600 int (*probe_valid_hardware)(struct amd64_pvt *pvt);
601 int (*early_channel_count)(struct amd64_pvt *pvt);
602
603 u64 (*get_error_address)(struct mem_ctl_info *mci,
604 struct amd64_error_info_regs *info);
605 void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram);
606 void (*read_dram_ctl_register)(struct amd64_pvt *pvt);
607 void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci,
608 struct amd64_error_info_regs *info,
609 u64 SystemAddr);
610 int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map);
611};
612
613struct amd64_family_type {
614 const char *ctl_name;
615 u16 addr_f1_ctl;
616 u16 misc_f3_ctl;
617 struct low_ops ops;
618};
619
620static struct amd64_family_type amd64_family_types[];
621
622static inline const char *get_amd_family_name(int index)
623{
624 return amd64_family_types[index].ctl_name;
625}
626
627static inline struct low_ops *family_ops(int index)
628{
629 return &amd64_family_types[index].ops;
630}
631
632/*
633 * For future CPU versions, verify the following as new 'slow' rates appear and
634 * modify the necessary skip values for the supported CPU.
635 */
636#define K8_MIN_SCRUB_RATE_BITS 0x0
637#define F10_MIN_SCRUB_RATE_BITS 0x5
638#define F11_MIN_SCRUB_RATE_BITS 0x6
639
640int amd64_process_error_info(struct mem_ctl_info *mci,
641 struct amd64_error_info_regs *info,
642 int handle_errors);
643int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
644 u64 *hole_offset, u64 *hole_size);