blob: 337488ec707cfc2aad6b14ae7aec63315510529c [file] [log] [blame]
Ben Dooks825a2ff2007-07-03 16:53:09 +01001/* drivers/net/ax88796.c
2 *
3 * Copyright 2005,2007 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * Asix AX88796 10/100 Ethernet controller support
7 * Based on ne.c, by Donald Becker, et-al.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#include <linux/module.h>
15#include <linux/kernel.h>
16#include <linux/errno.h>
17#include <linux/isapnp.h>
18#include <linux/init.h>
19#include <linux/interrupt.h>
20#include <linux/platform_device.h>
21#include <linux/delay.h>
22#include <linux/timer.h>
23#include <linux/netdevice.h>
24#include <linux/etherdevice.h>
25#include <linux/ethtool.h>
26#include <linux/mii.h>
Magnus Damm89e536a2007-09-28 22:42:16 -070027#include <linux/eeprom_93cx6.h>
Ben Dooks825a2ff2007-07-03 16:53:09 +010028
29#include <net/ax88796.h>
30
31#include <asm/system.h>
32#include <asm/io.h>
33
34static int phy_debug = 0;
35
36/* Rename the lib8390.c functions to show that they are in this driver */
37#define __ei_open ax_ei_open
38#define __ei_close ax_ei_close
39#define __ei_poll ax_ei_poll
40#define __ei_tx_timeout ax_ei_tx_timeout
41#define __ei_interrupt ax_ei_interrupt
42#define ____alloc_ei_netdev ax__alloc_ei_netdev
43#define __NS8390_init ax_NS8390_init
44
45/* force unsigned long back to 'void __iomem *' */
46#define ax_convert_addr(_a) ((void __force __iomem *)(_a))
47
48#define ei_inb(_a) readb(ax_convert_addr(_a))
49#define ei_outb(_v, _a) writeb(_v, ax_convert_addr(_a))
50
51#define ei_inb_p(_a) ei_inb(_a)
52#define ei_outb_p(_v, _a) ei_outb(_v, _a)
53
54/* define EI_SHIFT() to take into account our register offsets */
55#define EI_SHIFT(x) (ei_local->reg_offset[(x)])
56
57/* Ensure we have our RCR base value */
58#define AX88796_PLATFORM
59
60static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electronics\n";
61
62#include "lib8390.c"
63
64#define DRV_NAME "ax88796"
65#define DRV_VERSION "1.00"
66
67/* from ne.c */
68#define NE_CMD EI_SHIFT(0x00)
69#define NE_RESET EI_SHIFT(0x1f)
70#define NE_DATAPORT EI_SHIFT(0x10)
71
72#define NE1SM_START_PG 0x20 /* First page of TX buffer */
73#define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */
74#define NESM_START_PG 0x40 /* First page of TX buffer */
75#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
76
77/* device private data */
78
79struct ax_device {
80 struct timer_list mii_timer;
81 spinlock_t mii_lock;
82 struct mii_if_info mii;
83
84 u32 msg_enable;
85 void __iomem *map2;
86 struct platform_device *dev;
87 struct resource *mem;
88 struct resource *mem2;
89 struct ax_plat_data *plat;
90
91 unsigned char running;
92 unsigned char resume_open;
93
94 u32 reg_offsets[0x20];
95};
96
97static inline struct ax_device *to_ax_dev(struct net_device *dev)
98{
99 struct ei_device *ei_local = netdev_priv(dev);
100 return (struct ax_device *)(ei_local+1);
101}
102
103/* ax_initial_check
104 *
105 * do an initial probe for the card to check wether it exists
106 * and is functional
107 */
108
109static int ax_initial_check(struct net_device *dev)
110{
111 struct ei_device *ei_local = netdev_priv(dev);
112 void __iomem *ioaddr = ei_local->mem;
113 int reg0;
114 int regd;
115
116 reg0 = ei_inb(ioaddr);
117 if (reg0 == 0xFF)
118 return -ENODEV;
119
120 ei_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
121 regd = ei_inb(ioaddr + 0x0d);
122 ei_outb(0xff, ioaddr + 0x0d);
123 ei_outb(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
124 ei_inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
125 if (ei_inb(ioaddr + EN0_COUNTER0) != 0) {
126 ei_outb(reg0, ioaddr);
127 ei_outb(regd, ioaddr + 0x0d); /* Restore the old values. */
128 return -ENODEV;
129 }
130
131 return 0;
132}
133
134/* Hard reset the card. This used to pause for the same period that a
135 8390 reset command required, but that shouldn't be necessary. */
136
137static void ax_reset_8390(struct net_device *dev)
138{
139 struct ei_device *ei_local = netdev_priv(dev);
Ben Dooks237c5e82008-01-31 11:25:31 +0000140 struct ax_device *ax = to_ax_dev(dev);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100141 unsigned long reset_start_time = jiffies;
142 void __iomem *addr = (void __iomem *)dev->base_addr;
143
144 if (ei_debug > 1)
Ben Dooks237c5e82008-01-31 11:25:31 +0000145 dev_dbg(&ax->dev->dev, "resetting the 8390 t=%ld\n", jiffies);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100146
147 ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
148
149 ei_status.txing = 0;
150 ei_status.dmaing = 0;
151
152 /* This check _should_not_ be necessary, omit eventually. */
153 while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
154 if (jiffies - reset_start_time > 2*HZ/100) {
Ben Dooks237c5e82008-01-31 11:25:31 +0000155 dev_warn(&ax->dev->dev, "%s: %s did not complete.\n",
Harvey Harrisonb39d66a2008-08-20 16:52:04 -0700156 __func__, dev->name);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100157 break;
158 }
159 }
160
161 ei_outb(ENISR_RESET, addr + EN0_ISR); /* Ack intr. */
162}
163
164
165static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
166 int ring_page)
167{
168 struct ei_device *ei_local = netdev_priv(dev);
Ben Dooks237c5e82008-01-31 11:25:31 +0000169 struct ax_device *ax = to_ax_dev(dev);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100170 void __iomem *nic_base = ei_local->mem;
171
172 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
173 if (ei_status.dmaing) {
Ben Dooks237c5e82008-01-31 11:25:31 +0000174 dev_err(&ax->dev->dev, "%s: DMAing conflict in %s "
175 "[DMAstat:%d][irqlock:%d].\n",
Harvey Harrisonb39d66a2008-08-20 16:52:04 -0700176 dev->name, __func__,
Ben Dooks237c5e82008-01-31 11:25:31 +0000177 ei_status.dmaing, ei_status.irqlock);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100178 return;
179 }
180
181 ei_status.dmaing |= 0x01;
182 ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
183 ei_outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
184 ei_outb(0, nic_base + EN0_RCNTHI);
185 ei_outb(0, nic_base + EN0_RSARLO); /* On page boundary */
186 ei_outb(ring_page, nic_base + EN0_RSARHI);
187 ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
188
189 if (ei_status.word16)
190 readsw(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
191 else
192 readsb(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
193
194 ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
195 ei_status.dmaing &= ~0x01;
196
197 le16_to_cpus(&hdr->count);
198}
199
200
201/* Block input and output, similar to the Crynwr packet driver. If you
202 are porting to a new ethercard, look at the packet driver source for hints.
203 The NEx000 doesn't share the on-board packet memory -- you have to put
204 the packet out through the "remote DMA" dataport using ei_outb. */
205
206static void ax_block_input(struct net_device *dev, int count,
207 struct sk_buff *skb, int ring_offset)
208{
209 struct ei_device *ei_local = netdev_priv(dev);
Ben Dooks237c5e82008-01-31 11:25:31 +0000210 struct ax_device *ax = to_ax_dev(dev);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100211 void __iomem *nic_base = ei_local->mem;
212 char *buf = skb->data;
213
214 if (ei_status.dmaing) {
Ben Dooks237c5e82008-01-31 11:25:31 +0000215 dev_err(&ax->dev->dev,
216 "%s: DMAing conflict in %s "
Ben Dooks825a2ff2007-07-03 16:53:09 +0100217 "[DMAstat:%d][irqlock:%d].\n",
Harvey Harrisonb39d66a2008-08-20 16:52:04 -0700218 dev->name, __func__,
Ben Dooks237c5e82008-01-31 11:25:31 +0000219 ei_status.dmaing, ei_status.irqlock);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100220 return;
221 }
222
223 ei_status.dmaing |= 0x01;
224
225 ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
226 ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
227 ei_outb(count >> 8, nic_base + EN0_RCNTHI);
228 ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
229 ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
230 ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
231
232 if (ei_status.word16) {
233 readsw(nic_base + NE_DATAPORT, buf, count >> 1);
234 if (count & 0x01)
235 buf[count-1] = ei_inb(nic_base + NE_DATAPORT);
236
237 } else {
238 readsb(nic_base + NE_DATAPORT, buf, count);
239 }
240
241 ei_status.dmaing &= ~1;
242}
243
244static void ax_block_output(struct net_device *dev, int count,
245 const unsigned char *buf, const int start_page)
246{
247 struct ei_device *ei_local = netdev_priv(dev);
Ben Dooks237c5e82008-01-31 11:25:31 +0000248 struct ax_device *ax = to_ax_dev(dev);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100249 void __iomem *nic_base = ei_local->mem;
250 unsigned long dma_start;
251
252 /* Round the count up for word writes. Do we need to do this?
253 What effect will an odd byte count have on the 8390?
254 I should check someday. */
255
256 if (ei_status.word16 && (count & 0x01))
257 count++;
258
259 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
260 if (ei_status.dmaing) {
Ben Dooks237c5e82008-01-31 11:25:31 +0000261 dev_err(&ax->dev->dev, "%s: DMAing conflict in %s."
Ben Dooks825a2ff2007-07-03 16:53:09 +0100262 "[DMAstat:%d][irqlock:%d]\n",
Harvey Harrisonb39d66a2008-08-20 16:52:04 -0700263 dev->name, __func__,
Ben Dooks825a2ff2007-07-03 16:53:09 +0100264 ei_status.dmaing, ei_status.irqlock);
265 return;
266 }
267
268 ei_status.dmaing |= 0x01;
269 /* We should already be in page 0, but to be safe... */
270 ei_outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
271
272 ei_outb(ENISR_RDC, nic_base + EN0_ISR);
273
274 /* Now the normal output. */
275 ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
276 ei_outb(count >> 8, nic_base + EN0_RCNTHI);
277 ei_outb(0x00, nic_base + EN0_RSARLO);
278 ei_outb(start_page, nic_base + EN0_RSARHI);
279
280 ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
281 if (ei_status.word16) {
282 writesw(nic_base + NE_DATAPORT, buf, count>>1);
283 } else {
284 writesb(nic_base + NE_DATAPORT, buf, count);
285 }
286
287 dma_start = jiffies;
288
289 while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
290 if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
Ben Dooks237c5e82008-01-31 11:25:31 +0000291 dev_warn(&ax->dev->dev,
292 "%s: timeout waiting for Tx RDC.\n", dev->name);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100293 ax_reset_8390(dev);
294 ax_NS8390_init(dev,1);
295 break;
296 }
297 }
298
299 ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
300 ei_status.dmaing &= ~0x01;
301 return;
302}
303
304/* definitions for accessing MII/EEPROM interface */
305
306#define AX_MEMR EI_SHIFT(0x14)
307#define AX_MEMR_MDC (1<<0)
308#define AX_MEMR_MDIR (1<<1)
309#define AX_MEMR_MDI (1<<2)
310#define AX_MEMR_MDO (1<<3)
311#define AX_MEMR_EECS (1<<4)
312#define AX_MEMR_EEI (1<<5)
313#define AX_MEMR_EEO (1<<6)
314#define AX_MEMR_EECLK (1<<7)
315
316/* ax_mii_ei_outbits
317 *
318 * write the specified set of bits to the phy
319*/
320
321static void
322ax_mii_ei_outbits(struct net_device *dev, unsigned int bits, int len)
323{
324 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
325 void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
326 unsigned int memr;
327
328 /* clock low, data to output mode */
329 memr = ei_inb(memr_addr);
330 memr &= ~(AX_MEMR_MDC | AX_MEMR_MDIR);
331 ei_outb(memr, memr_addr);
332
333 for (len--; len >= 0; len--) {
334 if (bits & (1 << len))
335 memr |= AX_MEMR_MDO;
336 else
337 memr &= ~AX_MEMR_MDO;
338
339 ei_outb(memr, memr_addr);
340
341 /* clock high */
342
343 ei_outb(memr | AX_MEMR_MDC, memr_addr);
344 udelay(1);
345
346 /* clock low */
347 ei_outb(memr, memr_addr);
348 }
349
350 /* leaves the clock line low, mdir input */
351 memr |= AX_MEMR_MDIR;
352 ei_outb(memr, (void __iomem *)dev->base_addr + AX_MEMR);
353}
354
355/* ax_phy_ei_inbits
356 *
357 * read a specified number of bits from the phy
358*/
359
360static unsigned int
361ax_phy_ei_inbits(struct net_device *dev, int no)
362{
363 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
364 void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
365 unsigned int memr;
366 unsigned int result = 0;
367
368 /* clock low, data to input mode */
369 memr = ei_inb(memr_addr);
370 memr &= ~AX_MEMR_MDC;
371 memr |= AX_MEMR_MDIR;
372 ei_outb(memr, memr_addr);
373
374 for (no--; no >= 0; no--) {
375 ei_outb(memr | AX_MEMR_MDC, memr_addr);
376
377 udelay(1);
378
379 if (ei_inb(memr_addr) & AX_MEMR_MDI)
380 result |= (1<<no);
381
382 ei_outb(memr, memr_addr);
383 }
384
385 return result;
386}
387
388/* ax_phy_issueaddr
389 *
390 * use the low level bit shifting routines to send the address
391 * and command to the specified phy
392*/
393
394static void
395ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
396{
397 if (phy_debug)
398 pr_debug("%s: dev %p, %04x, %04x, %d\n",
Harvey Harrisonb39d66a2008-08-20 16:52:04 -0700399 __func__, dev, phy_addr, reg, opc);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100400
401 ax_mii_ei_outbits(dev, 0x3f, 6); /* pre-amble */
402 ax_mii_ei_outbits(dev, 1, 2); /* frame-start */
403 ax_mii_ei_outbits(dev, opc, 2); /* op code */
404 ax_mii_ei_outbits(dev, phy_addr, 5); /* phy address */
405 ax_mii_ei_outbits(dev, reg, 5); /* reg address */
406}
407
408static int
409ax_phy_read(struct net_device *dev, int phy_addr, int reg)
410{
411 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
412 unsigned long flags;
413 unsigned int result;
414
415 spin_lock_irqsave(&ei_local->page_lock, flags);
416
417 ax_phy_issueaddr(dev, phy_addr, reg, 2);
418
419 result = ax_phy_ei_inbits(dev, 17);
420 result &= ~(3<<16);
421
422 spin_unlock_irqrestore(&ei_local->page_lock, flags);
423
424 if (phy_debug)
Harvey Harrisonb39d66a2008-08-20 16:52:04 -0700425 pr_debug("%s: %04x.%04x => read %04x\n", __func__,
Ben Dooks825a2ff2007-07-03 16:53:09 +0100426 phy_addr, reg, result);
427
428 return result;
429}
430
431static void
432ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
433{
434 struct ei_device *ei = (struct ei_device *) netdev_priv(dev);
Ben Dooks237c5e82008-01-31 11:25:31 +0000435 struct ax_device *ax = to_ax_dev(dev);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100436 unsigned long flags;
437
Ben Dooks237c5e82008-01-31 11:25:31 +0000438 dev_dbg(&ax->dev->dev, "%s: %p, %04x, %04x %04x\n",
Harvey Harrisonb39d66a2008-08-20 16:52:04 -0700439 __func__, dev, phy_addr, reg, value);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100440
441 spin_lock_irqsave(&ei->page_lock, flags);
442
443 ax_phy_issueaddr(dev, phy_addr, reg, 1);
444 ax_mii_ei_outbits(dev, 2, 2); /* send TA */
445 ax_mii_ei_outbits(dev, value, 16);
446
447 spin_unlock_irqrestore(&ei->page_lock, flags);
448}
449
450static void ax_mii_expiry(unsigned long data)
451{
452 struct net_device *dev = (struct net_device *)data;
453 struct ax_device *ax = to_ax_dev(dev);
454 unsigned long flags;
455
456 spin_lock_irqsave(&ax->mii_lock, flags);
457 mii_check_media(&ax->mii, netif_msg_link(ax), 0);
458 spin_unlock_irqrestore(&ax->mii_lock, flags);
459
460 if (ax->running) {
461 ax->mii_timer.expires = jiffies + HZ*2;
462 add_timer(&ax->mii_timer);
463 }
464}
465
466static int ax_open(struct net_device *dev)
467{
468 struct ax_device *ax = to_ax_dev(dev);
469 struct ei_device *ei_local = netdev_priv(dev);
470 int ret;
471
Al Viro2832e852007-07-15 21:00:51 +0100472 dev_dbg(&ax->dev->dev, "%s: open\n", dev->name);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100473
474 ret = request_irq(dev->irq, ax_ei_interrupt, 0, dev->name, dev);
475 if (ret)
476 return ret;
477
478 ret = ax_ei_open(dev);
479 if (ret)
480 return ret;
481
482 /* turn the phy on (if turned off) */
483
484 ei_outb(ax->plat->gpoc_val, ei_local->mem + EI_SHIFT(0x17));
485 ax->running = 1;
486
487 /* start the MII timer */
488
489 init_timer(&ax->mii_timer);
490
491 ax->mii_timer.expires = jiffies+1;
492 ax->mii_timer.data = (unsigned long) dev;
493 ax->mii_timer.function = ax_mii_expiry;
494
495 add_timer(&ax->mii_timer);
496
497 return 0;
498}
499
500static int ax_close(struct net_device *dev)
501{
502 struct ax_device *ax = to_ax_dev(dev);
503 struct ei_device *ei_local = netdev_priv(dev);
504
Al Viro2832e852007-07-15 21:00:51 +0100505 dev_dbg(&ax->dev->dev, "%s: close\n", dev->name);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100506
507 /* turn the phy off */
508
509 ei_outb(ax->plat->gpoc_val | (1<<6),
510 ei_local->mem + EI_SHIFT(0x17));
511
512 ax->running = 0;
513 wmb();
514
515 del_timer_sync(&ax->mii_timer);
516 ax_ei_close(dev);
517
518 free_irq(dev->irq, dev);
519 return 0;
520}
521
522static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
523{
524 struct ax_device *ax = to_ax_dev(dev);
525 unsigned long flags;
526 int rc;
527
528 if (!netif_running(dev))
529 return -EINVAL;
530
531 spin_lock_irqsave(&ax->mii_lock, flags);
532 rc = generic_mii_ioctl(&ax->mii, if_mii(req), cmd, NULL);
533 spin_unlock_irqrestore(&ax->mii_lock, flags);
534
535 return rc;
536}
537
538/* ethtool ops */
539
540static void ax_get_drvinfo(struct net_device *dev,
541 struct ethtool_drvinfo *info)
542{
543 struct ax_device *ax = to_ax_dev(dev);
544
545 strcpy(info->driver, DRV_NAME);
546 strcpy(info->version, DRV_VERSION);
547 strcpy(info->bus_info, ax->dev->name);
548}
549
550static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
551{
552 struct ax_device *ax = to_ax_dev(dev);
553 unsigned long flags;
554
555 spin_lock_irqsave(&ax->mii_lock, flags);
556 mii_ethtool_gset(&ax->mii, cmd);
Ben Dooksc0912582008-08-07 17:21:09 +0100557 spin_unlock_irqrestore(&ax->mii_lock, flags);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100558
559 return 0;
560}
561
562static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
563{
564 struct ax_device *ax = to_ax_dev(dev);
565 unsigned long flags;
566 int rc;
567
568 spin_lock_irqsave(&ax->mii_lock, flags);
569 rc = mii_ethtool_sset(&ax->mii, cmd);
Ben Dooksc0912582008-08-07 17:21:09 +0100570 spin_unlock_irqrestore(&ax->mii_lock, flags);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100571
572 return rc;
573}
574
575static int ax_nway_reset(struct net_device *dev)
576{
577 struct ax_device *ax = to_ax_dev(dev);
578 return mii_nway_restart(&ax->mii);
579}
580
581static u32 ax_get_link(struct net_device *dev)
582{
583 struct ax_device *ax = to_ax_dev(dev);
584 return mii_link_ok(&ax->mii);
585}
586
587static const struct ethtool_ops ax_ethtool_ops = {
588 .get_drvinfo = ax_get_drvinfo,
589 .get_settings = ax_get_settings,
590 .set_settings = ax_set_settings,
591 .nway_reset = ax_nway_reset,
592 .get_link = ax_get_link,
Ben Dooks825a2ff2007-07-03 16:53:09 +0100593};
594
Magnus Damm89e536a2007-09-28 22:42:16 -0700595#ifdef CONFIG_AX88796_93CX6
596static void ax_eeprom_register_read(struct eeprom_93cx6 *eeprom)
597{
598 struct ei_device *ei_local = eeprom->data;
599 u8 reg = ei_inb(ei_local->mem + AX_MEMR);
600
601 eeprom->reg_data_in = reg & AX_MEMR_EEI;
602 eeprom->reg_data_out = reg & AX_MEMR_EEO; /* Input pin */
603 eeprom->reg_data_clock = reg & AX_MEMR_EECLK;
604 eeprom->reg_chip_select = reg & AX_MEMR_EECS;
605}
606
607static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
608{
609 struct ei_device *ei_local = eeprom->data;
610 u8 reg = ei_inb(ei_local->mem + AX_MEMR);
611
612 reg &= ~(AX_MEMR_EEI | AX_MEMR_EECLK | AX_MEMR_EECS);
613
614 if (eeprom->reg_data_in)
615 reg |= AX_MEMR_EEI;
616 if (eeprom->reg_data_clock)
617 reg |= AX_MEMR_EECLK;
618 if (eeprom->reg_chip_select)
619 reg |= AX_MEMR_EECS;
620
621 ei_outb(reg, ei_local->mem + AX_MEMR);
622 udelay(10);
623}
624#endif
625
Ben Dooks825a2ff2007-07-03 16:53:09 +0100626/* setup code */
627
628static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
629{
630 void __iomem *ioaddr = ei_local->mem;
631 struct ax_device *ax = to_ax_dev(dev);
632
633 /* Select page 0*/
634 ei_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, ioaddr + E8390_CMD);
635
636 /* set to byte access */
637 ei_outb(ax->plat->dcr_val & ~1, ioaddr + EN0_DCFG);
638 ei_outb(ax->plat->gpoc_val, ioaddr + EI_SHIFT(0x17));
639}
640
641/* ax_init_dev
642 *
643 * initialise the specified device, taking care to note the MAC
644 * address it may already have (if configured), ensure
645 * the device is ready to be used by lib8390.c and registerd with
646 * the network layer.
647 */
648
649static int ax_init_dev(struct net_device *dev, int first_init)
650{
651 struct ei_device *ei_local = netdev_priv(dev);
652 struct ax_device *ax = to_ax_dev(dev);
653 void __iomem *ioaddr = ei_local->mem;
654 unsigned int start_page;
655 unsigned int stop_page;
656 int ret;
657 int i;
658
659 ret = ax_initial_check(dev);
660 if (ret)
661 goto err_out;
662
663 /* setup goes here */
664
665 ax_initial_setup(dev, ei_local);
666
667 /* read the mac from the card prom if we need it */
668
669 if (first_init && ax->plat->flags & AXFLG_HAS_EEPROM) {
670 unsigned char SA_prom[32];
671
672 for(i = 0; i < sizeof(SA_prom); i+=2) {
673 SA_prom[i] = ei_inb(ioaddr + NE_DATAPORT);
674 SA_prom[i+1] = ei_inb(ioaddr + NE_DATAPORT);
675 }
676
677 if (ax->plat->wordlength == 2)
678 for (i = 0; i < 16; i++)
679 SA_prom[i] = SA_prom[i+i];
680
681 memcpy(dev->dev_addr, SA_prom, 6);
682 }
683
Magnus Damm89e536a2007-09-28 22:42:16 -0700684#ifdef CONFIG_AX88796_93CX6
685 if (first_init && ax->plat->flags & AXFLG_HAS_93CX6) {
686 unsigned char mac_addr[6];
687 struct eeprom_93cx6 eeprom;
688
689 eeprom.data = ei_local;
690 eeprom.register_read = ax_eeprom_register_read;
691 eeprom.register_write = ax_eeprom_register_write;
692 eeprom.width = PCI_EEPROM_WIDTH_93C56;
693
694 eeprom_93cx6_multiread(&eeprom, 0,
695 (__le16 __force *)mac_addr,
696 sizeof(mac_addr) >> 1);
697
698 memcpy(dev->dev_addr, mac_addr, 6);
699 }
700#endif
Ben Dooks825a2ff2007-07-03 16:53:09 +0100701 if (ax->plat->wordlength == 2) {
702 /* We must set the 8390 for word mode. */
703 ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);
704 start_page = NESM_START_PG;
705 stop_page = NESM_STOP_PG;
706 } else {
707 start_page = NE1SM_START_PG;
708 stop_page = NE1SM_STOP_PG;
709 }
710
711 /* load the mac-address from the device if this is the
712 * first time we've initialised */
713
714 if (first_init && ax->plat->flags & AXFLG_MAC_FROMDEV) {
715 ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
716 ei_local->mem + E8390_CMD); /* 0x61 */
717
718 for (i = 0 ; i < ETHER_ADDR_LEN ; i++)
719 dev->dev_addr[i] = ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
720 }
721
722 ax_reset_8390(dev);
723
724 ei_status.name = "AX88796";
725 ei_status.tx_start_page = start_page;
726 ei_status.stop_page = stop_page;
727 ei_status.word16 = (ax->plat->wordlength == 2);
728 ei_status.rx_start_page = start_page + TX_PAGES;
729
730#ifdef PACKETBUF_MEMSIZE
731 /* Allow the packet buffer size to be overridden by know-it-alls. */
732 ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
733#endif
734
735 ei_status.reset_8390 = &ax_reset_8390;
736 ei_status.block_input = &ax_block_input;
737 ei_status.block_output = &ax_block_output;
738 ei_status.get_8390_hdr = &ax_get_8390_hdr;
739 ei_status.priv = 0;
740
741 dev->open = ax_open;
742 dev->stop = ax_close;
743 dev->do_ioctl = ax_ioctl;
744 dev->ethtool_ops = &ax_ethtool_ops;
745
746 ax->msg_enable = NETIF_MSG_LINK;
747 ax->mii.phy_id_mask = 0x1f;
748 ax->mii.reg_num_mask = 0x1f;
749 ax->mii.phy_id = 0x10; /* onboard phy */
750 ax->mii.force_media = 0;
751 ax->mii.full_duplex = 0;
752 ax->mii.mdio_read = ax_phy_read;
753 ax->mii.mdio_write = ax_phy_write;
754 ax->mii.dev = dev;
755
756#ifdef CONFIG_NET_POLL_CONTROLLER
757 dev->poll_controller = ax_ei_poll;
758#endif
759 ax_NS8390_init(dev, 0);
760
Johannes Berge1749612008-10-27 15:59:26 -0700761 if (first_init)
762 dev_info(&ax->dev->dev, "%dbit, irq %d, %lx, MAC: %pM\n",
Ben Dooks237c5e82008-01-31 11:25:31 +0000763 ei_status.word16 ? 16:8, dev->irq, dev->base_addr,
Johannes Berge1749612008-10-27 15:59:26 -0700764 dev->dev_addr);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100765
766 ret = register_netdev(dev);
767 if (ret)
768 goto out_irq;
769
770 return 0;
771
772 out_irq:
773 /* cleanup irq */
774 free_irq(dev->irq, dev);
775 err_out:
776 return ret;
777}
778
779static int ax_remove(struct platform_device *_dev)
780{
781 struct net_device *dev = platform_get_drvdata(_dev);
782 struct ax_device *ax;
783
784 ax = to_ax_dev(dev);
785
786 unregister_netdev(dev);
787 free_irq(dev->irq, dev);
788
789 iounmap(ei_status.mem);
790 release_resource(ax->mem);
791 kfree(ax->mem);
792
793 if (ax->map2) {
794 iounmap(ax->map2);
795 release_resource(ax->mem2);
796 kfree(ax->mem2);
797 }
798
799 free_netdev(dev);
800
801 return 0;
802}
803
804/* ax_probe
805 *
806 * This is the entry point when the platform device system uses to
807 * notify us of a new device to attach to. Allocate memory, find
808 * the resources and information passed, and map the necessary registers.
809*/
810
811static int ax_probe(struct platform_device *pdev)
812{
813 struct net_device *dev;
814 struct ax_device *ax;
815 struct resource *res;
816 size_t size;
817 int ret;
818
819 dev = ax__alloc_ei_netdev(sizeof(struct ax_device));
820 if (dev == NULL)
821 return -ENOMEM;
822
823 /* ok, let's setup our device */
824 ax = to_ax_dev(dev);
825
826 memset(ax, 0, sizeof(struct ax_device));
827
828 spin_lock_init(&ax->mii_lock);
829
830 ax->dev = pdev;
831 ax->plat = pdev->dev.platform_data;
832 platform_set_drvdata(pdev, dev);
833
834 ei_status.rxcr_base = ax->plat->rcr_val;
835
836 /* find the platform resources */
837
roel kluinced1cba2008-10-21 01:44:02 -0400838 ret = platform_get_irq(pdev, 0);
839 if (ret < 0) {
Ben Dooks825a2ff2007-07-03 16:53:09 +0100840 dev_err(&pdev->dev, "no IRQ specified\n");
Ben Dooks825a2ff2007-07-03 16:53:09 +0100841 goto exit_mem;
842 }
roel kluinced1cba2008-10-21 01:44:02 -0400843 dev->irq = ret;
Ben Dooks825a2ff2007-07-03 16:53:09 +0100844
845 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
846 if (res == NULL) {
847 dev_err(&pdev->dev, "no MEM specified\n");
848 ret = -ENXIO;
849 goto exit_mem;
850 }
851
852 size = (res->end - res->start) + 1;
853
854 /* setup the register offsets from either the platform data
855 * or by using the size of the resource provided */
856
857 if (ax->plat->reg_offsets)
858 ei_status.reg_offset = ax->plat->reg_offsets;
859 else {
860 ei_status.reg_offset = ax->reg_offsets;
861 for (ret = 0; ret < 0x18; ret++)
862 ax->reg_offsets[ret] = (size / 0x18) * ret;
863 }
864
865 ax->mem = request_mem_region(res->start, size, pdev->name);
866 if (ax->mem == NULL) {
867 dev_err(&pdev->dev, "cannot reserve registers\n");
868 ret = -ENXIO;
869 goto exit_mem;
870 }
871
872 ei_status.mem = ioremap(res->start, size);
Al Viroc7b17cb2007-07-26 17:36:29 +0100873 dev->base_addr = (unsigned long)ei_status.mem;
Ben Dooks825a2ff2007-07-03 16:53:09 +0100874
875 if (ei_status.mem == NULL) {
Andrew Mortonb4efe222007-08-10 14:05:21 -0700876 dev_err(&pdev->dev, "Cannot ioremap area (%08llx,%08llx)\n",
877 (unsigned long long)res->start,
878 (unsigned long long)res->end);
Ben Dooks825a2ff2007-07-03 16:53:09 +0100879
880 ret = -ENXIO;
881 goto exit_req;
882 }
883
884 /* look for reset area */
885
886 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
887 if (res == NULL) {
888 if (!ax->plat->reg_offsets) {
889 for (ret = 0; ret < 0x20; ret++)
890 ax->reg_offsets[ret] = (size / 0x20) * ret;
891 }
892
893 ax->map2 = NULL;
894 } else {
895 size = (res->end - res->start) + 1;
896
897 ax->mem2 = request_mem_region(res->start, size, pdev->name);
898 if (ax->mem == NULL) {
899 dev_err(&pdev->dev, "cannot reserve registers\n");
900 ret = -ENXIO;
901 goto exit_mem1;
902 }
903
904 ax->map2 = ioremap(res->start, size);
905 if (ax->map2 == NULL) {
Joe Perches898eb712007-10-18 03:06:30 -0700906 dev_err(&pdev->dev, "cannot map reset register\n");
Ben Dooks825a2ff2007-07-03 16:53:09 +0100907 ret = -ENXIO;
908 goto exit_mem2;
909 }
910
911 ei_status.reg_offset[0x1f] = ax->map2 - ei_status.mem;
912 }
913
914 /* got resources, now initialise and register device */
915
916 ret = ax_init_dev(dev, 1);
917 if (!ret)
918 return 0;
919
920 if (ax->map2 == NULL)
921 goto exit_mem1;
922
923 iounmap(ax->map2);
924
925 exit_mem2:
926 release_resource(ax->mem2);
927 kfree(ax->mem2);
928
929 exit_mem1:
930 iounmap(ei_status.mem);
931
932 exit_req:
933 release_resource(ax->mem);
934 kfree(ax->mem);
935
936 exit_mem:
937 free_netdev(dev);
938
939 return ret;
940}
941
942/* suspend and resume */
943
944#ifdef CONFIG_PM
945static int ax_suspend(struct platform_device *dev, pm_message_t state)
946{
947 struct net_device *ndev = platform_get_drvdata(dev);
948 struct ax_device *ax = to_ax_dev(ndev);
949
950 ax->resume_open = ax->running;
951
952 netif_device_detach(ndev);
953 ax_close(ndev);
954
955 return 0;
956}
957
958static int ax_resume(struct platform_device *pdev)
959{
960 struct net_device *ndev = platform_get_drvdata(pdev);
961 struct ax_device *ax = to_ax_dev(ndev);
962
963 ax_initial_setup(ndev, netdev_priv(ndev));
964 ax_NS8390_init(ndev, ax->resume_open);
965 netif_device_attach(ndev);
966
967 if (ax->resume_open)
968 ax_open(ndev);
969
970 return 0;
971}
972
973#else
974#define ax_suspend NULL
975#define ax_resume NULL
976#endif
977
978static struct platform_driver axdrv = {
979 .driver = {
980 .name = "ax88796",
981 .owner = THIS_MODULE,
982 },
983 .probe = ax_probe,
984 .remove = ax_remove,
985 .suspend = ax_suspend,
986 .resume = ax_resume,
987};
988
989static int __init axdrv_init(void)
990{
991 return platform_driver_register(&axdrv);
992}
993
994static void __exit axdrv_exit(void)
995{
996 platform_driver_unregister(&axdrv);
997}
998
999module_init(axdrv_init);
1000module_exit(axdrv_exit);
1001
1002MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
1003MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
1004MODULE_LICENSE("GPL v2");
Kay Sievers72abb462008-04-18 13:50:44 -07001005MODULE_ALIAS("platform:ax88796");