blob: bd07650dca56b0489b5518ccaaaa6eaf5f6de73a [file] [log] [blame]
Kumar Gala33d71d22007-08-20 08:50:28 -05001/*
2 * MPC8xx Communication Processor Module.
3 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
4 *
5 * This file contains structures and information for the communication
6 * processor channels. Some CPM control and status is available
7 * throught the MPC8xx internal memory map. See immap.h for details.
8 * This file only contains what I need for the moment, not the total
9 * CPM capabilities. I (or someone else) will add definitions as they
10 * are needed. -- Dan
11 *
12 * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
13 * bytes of the DP RAM and relocates the I2C parameter area to the
14 * IDMA1 space. The remaining DP RAM is available for buffer descriptors
15 * or other use.
16 */
Jochen Friedrichb5677d82008-01-25 15:31:42 +010017#ifndef __CPM1__
18#define __CPM1__
Kumar Gala33d71d22007-08-20 08:50:28 -050019
Anton Vorontsovaf71bcf2010-07-08 21:16:16 +040020#include <linux/init.h>
Kumar Gala33d71d22007-08-20 08:50:28 -050021#include <asm/8xx_immap.h>
22#include <asm/ptrace.h>
Scott Wood15f8c602007-09-28 14:06:16 -050023#include <asm/cpm.h>
Kumar Gala33d71d22007-08-20 08:50:28 -050024
25/* CPM Command register.
26*/
27#define CPM_CR_RST ((ushort)0x8000)
28#define CPM_CR_OPCODE ((ushort)0x0f00)
29#define CPM_CR_CHAN ((ushort)0x00f0)
30#define CPM_CR_FLG ((ushort)0x0001)
31
Kumar Gala33d71d22007-08-20 08:50:28 -050032/* Channel numbers.
33*/
34#define CPM_CR_CH_SCC1 ((ushort)0x0000)
35#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
36#define CPM_CR_CH_SCC2 ((ushort)0x0004)
37#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */
38#define CPM_CR_CH_TIMER CPM_CR_CH_SPI
39#define CPM_CR_CH_SCC3 ((ushort)0x0008)
40#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
41#define CPM_CR_CH_SCC4 ((ushort)0x000c)
42#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
43
44#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
45
Kumar Gala33d71d22007-08-20 08:50:28 -050046/* Export the base address of the communication processor registers
47 * and dual port ram.
48 */
Scott Woodfb533d02007-09-14 14:22:36 -050049extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
Scott Wood15f8c602007-09-28 14:06:16 -050050
Scott Wood15f8c602007-09-28 14:06:16 -050051#define cpm_dpalloc cpm_muram_alloc
52#define cpm_dpfree cpm_muram_free
53#define cpm_dpram_addr cpm_muram_addr
54#define cpm_dpram_phys cpm_muram_dma
Scott Wood15f8c602007-09-28 14:06:16 -050055
Kumar Gala33d71d22007-08-20 08:50:28 -050056extern void cpm_setbrg(uint brg, uint rate);
57
Anton Vorontsovaf71bcf2010-07-08 21:16:16 +040058extern void __init cpm_load_patch(cpm8xx_t *cp);
Kumar Gala33d71d22007-08-20 08:50:28 -050059
Jochen Friedrich49b51542008-01-24 16:18:32 +010060extern void cpm_reset(void);
61
Kumar Gala33d71d22007-08-20 08:50:28 -050062/* Parameter RAM offsets.
63*/
64#define PROFF_SCC1 ((uint)0x0000)
65#define PROFF_IIC ((uint)0x0080)
66#define PROFF_SCC2 ((uint)0x0100)
67#define PROFF_SPI ((uint)0x0180)
68#define PROFF_SCC3 ((uint)0x0200)
69#define PROFF_SMC1 ((uint)0x0280)
70#define PROFF_SCC4 ((uint)0x0300)
71#define PROFF_SMC2 ((uint)0x0380)
72
73/* Define enough so I can at least use the serial port as a UART.
74 * The MBX uses SMC1 as the host serial port.
75 */
76typedef struct smc_uart {
77 ushort smc_rbase; /* Rx Buffer descriptor base address */
78 ushort smc_tbase; /* Tx Buffer descriptor base address */
79 u_char smc_rfcr; /* Rx function code */
80 u_char smc_tfcr; /* Tx function code */
81 ushort smc_mrblr; /* Max receive buffer length */
82 uint smc_rstate; /* Internal */
83 uint smc_idp; /* Internal */
84 ushort smc_rbptr; /* Internal */
85 ushort smc_ibc; /* Internal */
86 uint smc_rxtmp; /* Internal */
87 uint smc_tstate; /* Internal */
88 uint smc_tdp; /* Internal */
89 ushort smc_tbptr; /* Internal */
90 ushort smc_tbc; /* Internal */
91 uint smc_txtmp; /* Internal */
92 ushort smc_maxidl; /* Maximum idle characters */
93 ushort smc_tmpidl; /* Temporary idle counter */
94 ushort smc_brklen; /* Last received break length */
95 ushort smc_brkec; /* rcv'd break condition counter */
96 ushort smc_brkcr; /* xmt break count register */
97 ushort smc_rmask; /* Temporary bit mask */
98 char res1[8]; /* Reserved */
99 ushort smc_rpbase; /* Relocation pointer */
100} smc_uart_t;
101
102/* Function code bits.
103*/
104#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
105
106/* SMC uart mode register.
107*/
108#define SMCMR_REN ((ushort)0x0001)
109#define SMCMR_TEN ((ushort)0x0002)
110#define SMCMR_DM ((ushort)0x000c)
111#define SMCMR_SM_GCI ((ushort)0x0000)
112#define SMCMR_SM_UART ((ushort)0x0020)
113#define SMCMR_SM_TRANS ((ushort)0x0030)
114#define SMCMR_SM_MASK ((ushort)0x0030)
115#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
116#define SMCMR_REVD SMCMR_PM_EVEN
117#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
118#define SMCMR_BS SMCMR_PEN
119#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
120#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
121#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
122
123/* SMC2 as Centronics parallel printer. It is half duplex, in that
124 * it can only receive or transmit. The parameter ram values for
125 * each direction are either unique or properly overlap, so we can
126 * include them in one structure.
127 */
128typedef struct smc_centronics {
129 ushort scent_rbase;
130 ushort scent_tbase;
131 u_char scent_cfcr;
132 u_char scent_smask;
133 ushort scent_mrblr;
134 uint scent_rstate;
135 uint scent_r_ptr;
136 ushort scent_rbptr;
137 ushort scent_r_cnt;
138 uint scent_rtemp;
139 uint scent_tstate;
140 uint scent_t_ptr;
141 ushort scent_tbptr;
142 ushort scent_t_cnt;
143 uint scent_ttemp;
144 ushort scent_max_sl;
145 ushort scent_sl_cnt;
146 ushort scent_character1;
147 ushort scent_character2;
148 ushort scent_character3;
149 ushort scent_character4;
150 ushort scent_character5;
151 ushort scent_character6;
152 ushort scent_character7;
153 ushort scent_character8;
154 ushort scent_rccm;
155 ushort scent_rccr;
156} smc_cent_t;
157
158/* Centronics Status Mask Register.
159*/
160#define SMC_CENT_F ((u_char)0x08)
161#define SMC_CENT_PE ((u_char)0x04)
162#define SMC_CENT_S ((u_char)0x02)
163
164/* SMC Event and Mask register.
165*/
166#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
167#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
168#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
169#define SMCM_BSY ((unsigned char)0x04)
170#define SMCM_TX ((unsigned char)0x02)
171#define SMCM_RX ((unsigned char)0x01)
172
173/* Baud rate generators.
174*/
175#define CPM_BRG_RST ((uint)0x00020000)
176#define CPM_BRG_EN ((uint)0x00010000)
177#define CPM_BRG_EXTC_INT ((uint)0x00000000)
178#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
179#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
180#define CPM_BRG_ATB ((uint)0x00002000)
181#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
182#define CPM_BRG_DIV16 ((uint)0x00000001)
183
184/* SI Clock Route Register
185*/
186#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
187#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
188#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
189#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
190#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
191#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
192#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
193#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
194
195/* SCCs.
196*/
197#define SCC_GSMRH_IRP ((uint)0x00040000)
198#define SCC_GSMRH_GDE ((uint)0x00010000)
199#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
200#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
201#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
202#define SCC_GSMRH_REVD ((uint)0x00002000)
203#define SCC_GSMRH_TRX ((uint)0x00001000)
204#define SCC_GSMRH_TTX ((uint)0x00000800)
205#define SCC_GSMRH_CDP ((uint)0x00000400)
206#define SCC_GSMRH_CTSP ((uint)0x00000200)
207#define SCC_GSMRH_CDS ((uint)0x00000100)
208#define SCC_GSMRH_CTSS ((uint)0x00000080)
209#define SCC_GSMRH_TFL ((uint)0x00000040)
210#define SCC_GSMRH_RFW ((uint)0x00000020)
211#define SCC_GSMRH_TXSY ((uint)0x00000010)
212#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
213#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
214#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
215#define SCC_GSMRH_RTSM ((uint)0x00000002)
216#define SCC_GSMRH_RSYN ((uint)0x00000001)
217
218#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
219#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
220#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
221#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
222#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
223#define SCC_GSMRL_TCI ((uint)0x10000000)
224#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
225#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
226#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
227#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
228#define SCC_GSMRL_RINV ((uint)0x02000000)
229#define SCC_GSMRL_TINV ((uint)0x01000000)
230#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
231#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
232#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
233#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
234#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
235#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
236#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
237#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
238#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
239#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
240#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
241#define SCC_GSMRL_TEND ((uint)0x00040000)
242#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
243#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
244#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
245#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
246#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
247#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
248#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
249#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
250#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
251#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
252#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
253#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
254#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
255#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
256#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
257#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
258#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
259#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
260#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
261#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
262#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
263#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
264#define SCC_GSMRL_ENR ((uint)0x00000020)
265#define SCC_GSMRL_ENT ((uint)0x00000010)
266#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
267#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a)
268#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
269#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
270#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
271#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
272#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
273#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
274#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
275#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
276#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
277
278#define SCC_TODR_TOD ((ushort)0x8000)
279
280/* SCC Event and Mask register.
281*/
282#define SCCM_TXE ((unsigned char)0x10)
283#define SCCM_BSY ((unsigned char)0x04)
284#define SCCM_TX ((unsigned char)0x02)
285#define SCCM_RX ((unsigned char)0x01)
286
287typedef struct scc_param {
288 ushort scc_rbase; /* Rx Buffer descriptor base address */
289 ushort scc_tbase; /* Tx Buffer descriptor base address */
290 u_char scc_rfcr; /* Rx function code */
291 u_char scc_tfcr; /* Tx function code */
292 ushort scc_mrblr; /* Max receive buffer length */
293 uint scc_rstate; /* Internal */
294 uint scc_idp; /* Internal */
295 ushort scc_rbptr; /* Internal */
296 ushort scc_ibc; /* Internal */
297 uint scc_rxtmp; /* Internal */
298 uint scc_tstate; /* Internal */
299 uint scc_tdp; /* Internal */
300 ushort scc_tbptr; /* Internal */
301 ushort scc_tbc; /* Internal */
302 uint scc_txtmp; /* Internal */
303 uint scc_rcrc; /* Internal */
304 uint scc_tcrc; /* Internal */
305} sccp_t;
306
307/* Function code bits.
308*/
309#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
310
311/* CPM Ethernet through SCCx.
312 */
313typedef struct scc_enet {
314 sccp_t sen_genscc;
315 uint sen_cpres; /* Preset CRC */
316 uint sen_cmask; /* Constant mask for CRC */
317 uint sen_crcec; /* CRC Error counter */
318 uint sen_alec; /* alignment error counter */
319 uint sen_disfc; /* discard frame counter */
320 ushort sen_pads; /* Tx short frame pad character */
321 ushort sen_retlim; /* Retry limit threshold */
322 ushort sen_retcnt; /* Retry limit counter */
323 ushort sen_maxflr; /* maximum frame length register */
324 ushort sen_minflr; /* minimum frame length register */
325 ushort sen_maxd1; /* maximum DMA1 length */
326 ushort sen_maxd2; /* maximum DMA2 length */
327 ushort sen_maxd; /* Rx max DMA */
328 ushort sen_dmacnt; /* Rx DMA counter */
329 ushort sen_maxb; /* Max BD byte count */
330 ushort sen_gaddr1; /* Group address filter */
331 ushort sen_gaddr2;
332 ushort sen_gaddr3;
333 ushort sen_gaddr4;
334 uint sen_tbuf0data0; /* Save area 0 - current frame */
335 uint sen_tbuf0data1; /* Save area 1 - current frame */
336 uint sen_tbuf0rba; /* Internal */
337 uint sen_tbuf0crc; /* Internal */
338 ushort sen_tbuf0bcnt; /* Internal */
339 ushort sen_paddrh; /* physical address (MSB) */
340 ushort sen_paddrm;
341 ushort sen_paddrl; /* physical address (LSB) */
342 ushort sen_pper; /* persistence */
343 ushort sen_rfbdptr; /* Rx first BD pointer */
344 ushort sen_tfbdptr; /* Tx first BD pointer */
345 ushort sen_tlbdptr; /* Tx last BD pointer */
346 uint sen_tbuf1data0; /* Save area 0 - current frame */
347 uint sen_tbuf1data1; /* Save area 1 - current frame */
348 uint sen_tbuf1rba; /* Internal */
349 uint sen_tbuf1crc; /* Internal */
350 ushort sen_tbuf1bcnt; /* Internal */
351 ushort sen_txlen; /* Tx Frame length counter */
352 ushort sen_iaddr1; /* Individual address filter */
353 ushort sen_iaddr2;
354 ushort sen_iaddr3;
355 ushort sen_iaddr4;
356 ushort sen_boffcnt; /* Backoff counter */
357
358 /* NOTE: Some versions of the manual have the following items
359 * incorrectly documented. Below is the proper order.
360 */
361 ushort sen_taddrh; /* temp address (MSB) */
362 ushort sen_taddrm;
363 ushort sen_taddrl; /* temp address (LSB) */
364} scc_enet_t;
365
366/* SCC Event register as used by Ethernet.
367*/
368#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
369#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
370#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
371#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
372#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
373#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
374
375/* SCC Mode Register (PMSR) as used by Ethernet.
376*/
377#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
378#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
379#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
380#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
381#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
382#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
383#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
384#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
385#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
386#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
387#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
388#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
389#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
390
Kumar Gala33d71d22007-08-20 08:50:28 -0500391/* SCC as UART
392*/
393typedef struct scc_uart {
394 sccp_t scc_genscc;
395 char res1[8]; /* Reserved */
396 ushort scc_maxidl; /* Maximum idle chars */
397 ushort scc_idlc; /* temp idle counter */
398 ushort scc_brkcr; /* Break count register */
399 ushort scc_parec; /* receive parity error counter */
400 ushort scc_frmec; /* receive framing error counter */
401 ushort scc_nosec; /* receive noise counter */
402 ushort scc_brkec; /* receive break condition counter */
403 ushort scc_brkln; /* last received break length */
404 ushort scc_uaddr1; /* UART address character 1 */
405 ushort scc_uaddr2; /* UART address character 2 */
406 ushort scc_rtemp; /* Temp storage */
407 ushort scc_toseq; /* Transmit out of sequence char */
408 ushort scc_char1; /* control character 1 */
409 ushort scc_char2; /* control character 2 */
410 ushort scc_char3; /* control character 3 */
411 ushort scc_char4; /* control character 4 */
412 ushort scc_char5; /* control character 5 */
413 ushort scc_char6; /* control character 6 */
414 ushort scc_char7; /* control character 7 */
415 ushort scc_char8; /* control character 8 */
416 ushort scc_rccm; /* receive control character mask */
417 ushort scc_rccr; /* receive control character register */
418 ushort scc_rlbc; /* receive last break character */
419} scc_uart_t;
420
421/* SCC Event and Mask registers when it is used as a UART.
422*/
423#define UART_SCCM_GLR ((ushort)0x1000)
424#define UART_SCCM_GLT ((ushort)0x0800)
425#define UART_SCCM_AB ((ushort)0x0200)
426#define UART_SCCM_IDL ((ushort)0x0100)
427#define UART_SCCM_GRA ((ushort)0x0080)
428#define UART_SCCM_BRKE ((ushort)0x0040)
429#define UART_SCCM_BRKS ((ushort)0x0020)
430#define UART_SCCM_CCR ((ushort)0x0008)
431#define UART_SCCM_BSY ((ushort)0x0004)
432#define UART_SCCM_TX ((ushort)0x0002)
433#define UART_SCCM_RX ((ushort)0x0001)
434
435/* The SCC PMSR when used as a UART.
436*/
437#define SCU_PSMR_FLC ((ushort)0x8000)
438#define SCU_PSMR_SL ((ushort)0x4000)
439#define SCU_PSMR_CL ((ushort)0x3000)
440#define SCU_PSMR_UM ((ushort)0x0c00)
441#define SCU_PSMR_FRZ ((ushort)0x0200)
442#define SCU_PSMR_RZS ((ushort)0x0100)
443#define SCU_PSMR_SYN ((ushort)0x0080)
444#define SCU_PSMR_DRT ((ushort)0x0040)
445#define SCU_PSMR_PEN ((ushort)0x0010)
446#define SCU_PSMR_RPM ((ushort)0x000c)
447#define SCU_PSMR_REVP ((ushort)0x0008)
448#define SCU_PSMR_TPM ((ushort)0x0003)
449#define SCU_PSMR_TEVP ((ushort)0x0002)
450
451/* CPM Transparent mode SCC.
452 */
453typedef struct scc_trans {
454 sccp_t st_genscc;
455 uint st_cpres; /* Preset CRC */
456 uint st_cmask; /* Constant mask for CRC */
457} scc_trans_t;
458
Kumar Gala33d71d22007-08-20 08:50:28 -0500459/* IIC parameter RAM.
460*/
461typedef struct iic {
462 ushort iic_rbase; /* Rx Buffer descriptor base address */
463 ushort iic_tbase; /* Tx Buffer descriptor base address */
464 u_char iic_rfcr; /* Rx function code */
465 u_char iic_tfcr; /* Tx function code */
466 ushort iic_mrblr; /* Max receive buffer length */
467 uint iic_rstate; /* Internal */
468 uint iic_rdp; /* Internal */
469 ushort iic_rbptr; /* Internal */
470 ushort iic_rbc; /* Internal */
471 uint iic_rxtmp; /* Internal */
472 uint iic_tstate; /* Internal */
473 uint iic_tdp; /* Internal */
474 ushort iic_tbptr; /* Internal */
475 ushort iic_tbc; /* Internal */
476 uint iic_txtmp; /* Internal */
477 char res1[4]; /* Reserved */
478 ushort iic_rpbase; /* Relocation pointer */
479 char res2[2]; /* Reserved */
480} iic_t;
481
Kumar Gala33d71d22007-08-20 08:50:28 -0500482/*
483 * RISC Controller Configuration Register definitons
484 */
485#define RCCR_TIME 0x8000 /* RISC Timer Enable */
486#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */
487#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */
488
489/* RISC Timer Parameter RAM offset */
490#define PROFF_RTMR ((uint)0x01B0)
491
492typedef struct risc_timer_pram {
493 unsigned short tm_base; /* RISC Timer Table Base Address */
494 unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */
495 unsigned short r_tmr; /* RISC Timer Mode Register */
496 unsigned short r_tmv; /* RISC Timer Valid Register */
497 unsigned long tm_cmd; /* RISC Timer Command Register */
498 unsigned long tm_cnt; /* RISC Timer Internal Count */
499} rt_pram_t;
500
501/* Bits in RISC Timer Command Register */
502#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */
503#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */
504#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */
505#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */
506#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */
507
508/* CPM interrupts. There are nearly 32 interrupts generated by CPM
509 * channels or devices. All of these are presented to the PPC core
510 * as a single interrupt. The CPM interrupt handler dispatches its
511 * own handlers, in a similar fashion to the PPC core handler. We
512 * use the table as defined in the manuals (i.e. no special high
513 * priority and SCC1 == SCCa, etc...).
514 */
515#define CPMVEC_NR 32
516#define CPMVEC_PIO_PC15 ((ushort)0x1f)
517#define CPMVEC_SCC1 ((ushort)0x1e)
518#define CPMVEC_SCC2 ((ushort)0x1d)
519#define CPMVEC_SCC3 ((ushort)0x1c)
520#define CPMVEC_SCC4 ((ushort)0x1b)
521#define CPMVEC_PIO_PC14 ((ushort)0x1a)
522#define CPMVEC_TIMER1 ((ushort)0x19)
523#define CPMVEC_PIO_PC13 ((ushort)0x18)
524#define CPMVEC_PIO_PC12 ((ushort)0x17)
525#define CPMVEC_SDMA_CB_ERR ((ushort)0x16)
526#define CPMVEC_IDMA1 ((ushort)0x15)
527#define CPMVEC_IDMA2 ((ushort)0x14)
528#define CPMVEC_TIMER2 ((ushort)0x12)
529#define CPMVEC_RISCTIMER ((ushort)0x11)
530#define CPMVEC_I2C ((ushort)0x10)
531#define CPMVEC_PIO_PC11 ((ushort)0x0f)
532#define CPMVEC_PIO_PC10 ((ushort)0x0e)
533#define CPMVEC_TIMER3 ((ushort)0x0c)
534#define CPMVEC_PIO_PC9 ((ushort)0x0b)
535#define CPMVEC_PIO_PC8 ((ushort)0x0a)
536#define CPMVEC_PIO_PC7 ((ushort)0x09)
537#define CPMVEC_TIMER4 ((ushort)0x07)
538#define CPMVEC_PIO_PC6 ((ushort)0x06)
539#define CPMVEC_SPI ((ushort)0x05)
540#define CPMVEC_SMC1 ((ushort)0x04)
541#define CPMVEC_SMC2 ((ushort)0x03)
542#define CPMVEC_PIO_PC5 ((ushort)0x02)
543#define CPMVEC_PIO_PC4 ((ushort)0x01)
544#define CPMVEC_ERROR ((ushort)0x00)
545
546/* CPM interrupt configuration vector.
547*/
548#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
549#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
550#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
551#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
joe@perches.com567e9fd2007-12-18 06:30:13 +1100552#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
Kumar Gala33d71d22007-08-20 08:50:28 -0500553#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
554#define CICR_IEN ((uint)0x00000080) /* Int. enable */
555#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
556
Scott Wood663edbd2007-07-16 17:22:01 -0500557#define CPM_PIN_INPUT 0
558#define CPM_PIN_OUTPUT 1
559#define CPM_PIN_PRIMARY 0
560#define CPM_PIN_SECONDARY 2
561#define CPM_PIN_GPIO 4
562#define CPM_PIN_OPENDRAIN 8
563
564enum cpm_port {
565 CPM_PORTA,
566 CPM_PORTB,
567 CPM_PORTC,
568 CPM_PORTD,
569 CPM_PORTE,
570};
571
572void cpm1_set_pin(enum cpm_port port, int pin, int flags);
573
574enum cpm_clk_dir {
575 CPM_CLK_RX,
576 CPM_CLK_TX,
577 CPM_CLK_RTX
578};
579
580enum cpm_clk_target {
581 CPM_CLK_SCC1,
582 CPM_CLK_SCC2,
583 CPM_CLK_SCC3,
584 CPM_CLK_SCC4,
585 CPM_CLK_SMC1,
586 CPM_CLK_SMC2,
587};
588
589enum cpm_clk {
590 CPM_BRG1, /* Baud Rate Generator 1 */
591 CPM_BRG2, /* Baud Rate Generator 2 */
592 CPM_BRG3, /* Baud Rate Generator 3 */
593 CPM_BRG4, /* Baud Rate Generator 4 */
594 CPM_CLK1, /* Clock 1 */
595 CPM_CLK2, /* Clock 2 */
596 CPM_CLK3, /* Clock 3 */
597 CPM_CLK4, /* Clock 4 */
598 CPM_CLK5, /* Clock 5 */
599 CPM_CLK6, /* Clock 6 */
600 CPM_CLK7, /* Clock 7 */
601 CPM_CLK8, /* Clock 8 */
602};
603
604int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
605
Jochen Friedrichb5677d82008-01-25 15:31:42 +0100606#endif /* __CPM1__ */