blob: bade761a1e52b783a63dfb462f8b11ef4c111999 [file] [log] [blame]
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001/*
2 * Renesas USB driver
3 *
4 * Copyright (C) 2011 Renesas Solutions Corp.
5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
15 *
16 */
17#include <linux/io.h>
18#include <linux/list.h>
19#include <linux/module.h>
20#include <linux/platform_device.h>
21#include <linux/slab.h>
22#include <linux/usb.h>
23#include <linux/usb/hcd.h>
24#include "common.h"
25
26/*
27 *** HARDWARE LIMITATION ***
28 *
29 * 1) renesas_usbhs has a limited number of controllable devices.
30 * it can control only 9 devices in generally.
31 * see DEVADDn / DCPMAXP / PIPEMAXP.
32 *
33 * 2) renesas_usbhs pipe number is limited.
34 * the pipe will be re-used for each devices.
35 * so, software should control DATA0/1 sequence of each devices.
36 */
37
38
39/*
40 * image of mod_host
41 *
42 * +--------+
43 * | udev 0 | --> it is used when set address
44 * +--------+
45 *
46 * +--------+ pipes are reused for each uep.
47 * | udev 1 |-+- [uep 0 (dcp) ] --+ pipe will be switched when
48 * +--------+ | | target device was changed
49 * +- [uep 1 (bulk)] --|---+ +--------------+
50 * | +--------------> | pipe0 (dcp) |
51 * +- [uep 2 (bulk)] --|---|---+ +--------------+
52 * | | | | pipe1 (isoc) |
53 * +--------+ | | | +--------------+
54 * | udev 2 |-+- [uep 0 (dcp) ] --+ +-- |------> | pipe2 (bulk) |
55 * +--------+ | | | | +--------------+
56 * +- [uep 1 (int) ] --|-+ | +------> | pipe3 (bulk) |
57 * | | | | +--------------+
58 * +--------+ | +-|---|------> | pipe4 (int) |
59 * | udev 3 |-+- [uep 0 (dcp) ] --+ | | +--------------+
60 * +--------+ | | | | .... |
61 * +- [uep 1 (bulk)] ------+ | | .... |
62 * | |
63 * +- [uep 2 (bulk)]-----------+
64 */
65
66
67/*
68 * struct
69 */
70struct usbhsh_pipe_info {
71 unsigned int usr_cnt; /* see usbhsh_endpoint_alloc() */
72};
73
74struct usbhsh_request {
75 struct urb *urb;
76 struct usbhs_pkt pkt;
77 struct list_head ureq_link; /* see hpriv :: ureq_link_xxx */
78};
79
80struct usbhsh_device {
81 struct usb_device *usbv;
82 struct list_head ep_list_head; /* list of usbhsh_ep */
83};
84
85struct usbhsh_ep {
86 struct usbhs_pipe *pipe;
87 struct usbhsh_device *udev; /* attached udev */
88 struct list_head ep_list; /* list to usbhsh_device */
89
90 int maxp;
91};
92
93#define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
94#define USBHSH_PORT_MAX 7 /* see DEVADDn :: HUBPORT */
95struct usbhsh_hpriv {
96 struct usbhs_mod mod;
97 struct usbhs_pipe *dcp;
98
99 struct usbhsh_device udev[USBHSH_DEVICE_MAX];
100
101 struct usbhsh_pipe_info *pipe_info;
102 int pipe_size;
103
104 u32 port_stat; /* USB_PORT_STAT_xxx */
105
Kuninori Morimoto7fccd482011-10-23 22:55:54 -0700106 struct completion setup_ack_done;
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700107
108 /* see usbhsh_req_alloc/free */
109 struct list_head ureq_link_active;
110 struct list_head ureq_link_free;
111};
112
113
114static const char usbhsh_hcd_name[] = "renesas_usbhs host";
115
116/*
117 * macro
118 */
119#define usbhsh_priv_to_hpriv(priv) \
120 container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)
121
122#define __usbhsh_for_each_hpipe(start, pos, h, i) \
123 for (i = start, pos = (h)->hpipe + i; \
124 i < (h)->hpipe_size; \
125 i++, pos = (h)->hpipe + i)
126
127#define usbhsh_for_each_hpipe(pos, hpriv, i) \
128 __usbhsh_for_each_hpipe(1, pos, hpriv, i)
129
130#define usbhsh_for_each_hpipe_with_dcp(pos, hpriv, i) \
131 __usbhsh_for_each_hpipe(0, pos, hpriv, i)
132
133#define __usbhsh_for_each_udev(start, pos, h, i) \
134 for (i = start, pos = (h)->udev + i; \
135 i < USBHSH_DEVICE_MAX; \
136 i++, pos = (h)->udev + i)
137
138#define usbhsh_for_each_udev(pos, hpriv, i) \
139 __usbhsh_for_each_udev(1, pos, hpriv, i)
140
141#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i) \
142 __usbhsh_for_each_udev(0, pos, hpriv, i)
143
144#define usbhsh_hcd_to_hpriv(h) (struct usbhsh_hpriv *)((h)->hcd_priv)
145#define usbhsh_hcd_to_dev(h) ((h)->self.controller)
146
147#define usbhsh_hpriv_to_priv(h) ((h)->mod.priv)
148#define usbhsh_hpriv_to_dcp(h) ((h)->dcp)
149#define usbhsh_hpriv_to_hcd(h) \
150 container_of((void *)h, struct usb_hcd, hcd_priv)
151
152#define usbhsh_ep_to_uep(u) ((u)->hcpriv)
153#define usbhsh_uep_to_pipe(u) ((u)->pipe)
154#define usbhsh_uep_to_udev(u) ((u)->udev)
155#define usbhsh_urb_to_ureq(u) ((u)->hcpriv)
156#define usbhsh_urb_to_usbv(u) ((u)->dev)
157
158#define usbhsh_usbv_to_udev(d) dev_get_drvdata(&(d)->dev)
159
160#define usbhsh_udev_to_usbv(h) ((h)->usbv)
161
162#define usbhsh_pipe_info(p) ((p)->mod_private)
163
164#define usbhsh_device_number(h, d) ((int)((d) - (h)->udev))
165#define usbhsh_device_nth(h, d) ((h)->udev + d)
166#define usbhsh_device0(h) usbhsh_device_nth(h, 0)
167
168#define usbhsh_port_stat_init(h) ((h)->port_stat = 0)
169#define usbhsh_port_stat_set(h, s) ((h)->port_stat |= (s))
170#define usbhsh_port_stat_clear(h, s) ((h)->port_stat &= ~(s))
171#define usbhsh_port_stat_get(h) ((h)->port_stat)
172
173#define usbhsh_pkt_to_req(p) \
174 container_of((void *)p, struct usbhsh_request, pkt)
175
176/*
177 * req alloc/free
178 */
179static void usbhsh_req_list_init(struct usbhsh_hpriv *hpriv)
180{
181 INIT_LIST_HEAD(&hpriv->ureq_link_active);
182 INIT_LIST_HEAD(&hpriv->ureq_link_free);
183}
184
185static void usbhsh_req_list_quit(struct usbhsh_hpriv *hpriv)
186{
187 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
188 struct device *dev = usbhsh_hcd_to_dev(hcd);
189 struct usbhsh_request *ureq, *next;
190
191 /* kfree all active ureq */
192 list_for_each_entry_safe(ureq, next,
193 &hpriv->ureq_link_active,
194 ureq_link) {
195 dev_err(dev, "active ureq (%p) is force freed\n", ureq);
196 kfree(ureq);
197 }
198
199 /* kfree all free ureq */
200 list_for_each_entry_safe(ureq, next, &hpriv->ureq_link_free, ureq_link)
201 kfree(ureq);
202}
203
204static struct usbhsh_request *usbhsh_req_alloc(struct usbhsh_hpriv *hpriv,
205 struct urb *urb,
206 gfp_t mem_flags)
207{
208 struct usbhsh_request *ureq;
209 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
210 struct device *dev = usbhs_priv_to_dev(priv);
211
212 if (list_empty(&hpriv->ureq_link_free)) {
213 /*
214 * create new one if there is no free ureq
215 */
216 ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
217 if (ureq)
218 INIT_LIST_HEAD(&ureq->ureq_link);
219 } else {
220 /*
221 * reuse "free" ureq if exist
222 */
223 ureq = list_entry(hpriv->ureq_link_free.next,
224 struct usbhsh_request,
225 ureq_link);
226 if (ureq)
227 list_del_init(&ureq->ureq_link);
228 }
229
230 if (!ureq) {
231 dev_err(dev, "ureq alloc fail\n");
232 return NULL;
233 }
234
235 usbhs_pkt_init(&ureq->pkt);
236
237 /*
238 * push it to "active" list
239 */
240 list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_active);
241 ureq->urb = urb;
242
243 return ureq;
244}
245
246static void usbhsh_req_free(struct usbhsh_hpriv *hpriv,
247 struct usbhsh_request *ureq)
248{
249 struct usbhs_pkt *pkt = &ureq->pkt;
250
251 usbhs_pkt_init(pkt);
252
253 /*
254 * removed from "active" list,
255 * and push it to "free" list
256 */
257 ureq->urb = NULL;
258 list_del_init(&ureq->ureq_link);
259 list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_free);
260}
261
262/*
263 * device control
264 */
265
266static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
267{
268 return !list_empty(&udev->ep_list_head);
269}
270
271static struct usbhsh_device *usbhsh_device_alloc(struct usbhsh_hpriv *hpriv,
272 struct urb *urb)
273{
274 struct usbhsh_device *udev = NULL;
275 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
276 struct device *dev = usbhsh_hcd_to_dev(hcd);
277 struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
278 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
279 int i;
280
281 /*
282 * device 0
283 */
284 if (0 == usb_pipedevice(urb->pipe)) {
285 udev = usbhsh_device0(hpriv);
286 goto usbhsh_device_find;
287 }
288
289 /*
290 * find unused device
291 */
292 usbhsh_for_each_udev(udev, hpriv, i) {
293 if (usbhsh_udev_to_usbv(udev))
294 continue;
295 goto usbhsh_device_find;
296 }
297
298 dev_err(dev, "no free usbhsh_device\n");
299
300 return NULL;
301
302usbhsh_device_find:
303 if (usbhsh_device_has_endpoint(udev))
304 dev_warn(dev, "udev have old endpoint\n");
305
306 /* uep will be attached */
307 INIT_LIST_HEAD(&udev->ep_list_head);
308
309 /*
310 * usbhsh_usbv_to_udev()
311 * usbhsh_udev_to_usbv()
312 * will be enable
313 */
314 dev_set_drvdata(&usbv->dev, udev);
315 udev->usbv = usbv;
316
317 /* set device config */
318 usbhs_set_device_speed(priv,
319 usbhsh_device_number(hpriv, udev),
320 usbhsh_device_number(hpriv, udev),
321 0, /* FIXME no parent */
322 usbv->speed);
323
324 dev_dbg(dev, "%s [%d](%p)\n", __func__,
325 usbhsh_device_number(hpriv, udev), udev);
326
327 return udev;
328}
329
330static void usbhsh_device_free(struct usbhsh_hpriv *hpriv,
331 struct usbhsh_device *udev)
332{
333 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
334 struct device *dev = usbhsh_hcd_to_dev(hcd);
335 struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
336
337 dev_dbg(dev, "%s [%d](%p)\n", __func__,
338 usbhsh_device_number(hpriv, udev), udev);
339
340 if (usbhsh_device_has_endpoint(udev))
341 dev_warn(dev, "udev still have endpoint\n");
342
343 /*
344 * usbhsh_usbv_to_udev()
345 * usbhsh_udev_to_usbv()
346 * will be disable
347 */
348 dev_set_drvdata(&usbv->dev, NULL);
349 udev->usbv = NULL;
350}
351
352/*
353 * end-point control
354 */
355struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
356 struct usbhsh_device *udev,
357 struct usb_host_endpoint *ep,
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700358 int dir_in_req,
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700359 gfp_t mem_flags)
360{
361 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
362 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
363 struct usbhsh_ep *uep;
364 struct usbhsh_pipe_info *info;
365 struct usbhs_pipe *pipe, *best_pipe;
366 struct device *dev = usbhsh_hcd_to_dev(hcd);
367 struct usb_endpoint_descriptor *desc = &ep->desc;
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700368 int type, i, dir_in;
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700369 unsigned int min_usr;
370
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700371 dir_in_req = !!dir_in_req;
372
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700373 uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
374 if (!uep) {
375 dev_err(dev, "usbhsh_ep alloc fail\n");
376 return NULL;
377 }
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700378
379 if (usb_endpoint_xfer_control(desc)) {
380 best_pipe = usbhsh_hpriv_to_dcp(hpriv);
381 goto usbhsh_endpoint_alloc_find_pipe;
382 }
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700383
384 /*
385 * find best pipe for endpoint
386 * see
387 * HARDWARE LIMITATION
388 */
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700389 type = usb_endpoint_type(desc);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700390 min_usr = ~0;
391 best_pipe = NULL;
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700392 usbhs_for_each_pipe(pipe, priv, i) {
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700393 if (!usbhs_pipe_type_is(pipe, type))
394 continue;
395
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700396 dir_in = !!usbhs_pipe_is_dir_in(pipe);
397 if (0 != (dir_in - dir_in_req))
398 continue;
399
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700400 info = usbhsh_pipe_info(pipe);
401
402 if (min_usr > info->usr_cnt) {
403 min_usr = info->usr_cnt;
404 best_pipe = pipe;
405 }
406 }
407
408 if (unlikely(!best_pipe)) {
409 dev_err(dev, "couldn't find best pipe\n");
410 kfree(uep);
411 return NULL;
412 }
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700413usbhsh_endpoint_alloc_find_pipe:
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700414 /*
415 * init uep
416 */
417 uep->pipe = best_pipe;
418 uep->maxp = usb_endpoint_maxp(desc);
419 usbhsh_uep_to_udev(uep) = udev;
420 usbhsh_ep_to_uep(ep) = uep;
421
422 /*
423 * update pipe user count
424 */
425 info = usbhsh_pipe_info(best_pipe);
426 info->usr_cnt++;
427
428 /* init this endpoint, and attach it to udev */
429 INIT_LIST_HEAD(&uep->ep_list);
430 list_add_tail(&uep->ep_list, &udev->ep_list_head);
431
432 /*
433 * usbhs_pipe_config_update() should be called after
434 * usbhs_device_config()
435 * see
436 * DCPMAXP/PIPEMAXP
437 */
Kuninori Morimotod7a00ec2011-10-24 02:25:28 -0700438 usbhs_pipe_sequence_data0(uep->pipe);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700439 usbhs_pipe_config_update(uep->pipe,
440 usbhsh_device_number(hpriv, udev),
441 usb_endpoint_num(desc),
442 uep->maxp);
443
444 dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
445 usbhsh_device_number(hpriv, udev),
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700446 usbhs_pipe_name(uep->pipe), uep);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700447
448 return uep;
449}
450
451void usbhsh_endpoint_free(struct usbhsh_hpriv *hpriv,
452 struct usb_host_endpoint *ep)
453{
454 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
455 struct device *dev = usbhs_priv_to_dev(priv);
456 struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700457 struct usbhsh_pipe_info *info;
458
459 if (!uep)
460 return;
461
462 dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
Kuninori Morimoto55b5a622011-10-17 18:04:37 -0700463 usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)),
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700464 usbhs_pipe_name(uep->pipe), uep);
465
466 info = usbhsh_pipe_info(uep->pipe);
467 info->usr_cnt--;
468
469 /* remove this endpoint from udev */
470 list_del_init(&uep->ep_list);
471
472 usbhsh_uep_to_udev(uep) = NULL;
473 usbhsh_ep_to_uep(ep) = NULL;
474
475 kfree(uep);
476}
477
478/*
479 * queue push/pop
480 */
481static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
482{
483 struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt);
484 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
485 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
486 struct urb *urb = ureq->urb;
487 struct device *dev = usbhs_priv_to_dev(priv);
488
489 dev_dbg(dev, "%s\n", __func__);
490
491 if (!urb) {
492 dev_warn(dev, "pkt doesn't have urb\n");
493 return;
494 }
495
496 urb->actual_length = pkt->actual;
497 usbhsh_req_free(hpriv, ureq);
498 usbhsh_urb_to_ureq(urb) = NULL;
499
500 usb_hcd_unlink_urb_from_ep(hcd, urb);
501 usb_hcd_giveback_urb(hcd, urb, 0);
502}
503
504static int usbhsh_queue_push(struct usb_hcd *hcd,
505 struct usbhs_pipe *pipe,
506 struct urb *urb)
507{
508 struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
509 struct usbhs_pkt *pkt = &ureq->pkt;
510 struct device *dev = usbhsh_hcd_to_dev(hcd);
511 void *buf;
512 int len;
513
514 if (usb_pipeisoc(urb->pipe)) {
515 dev_err(dev, "pipe iso is not supported now\n");
516 return -EIO;
517 }
518
519 if (usb_pipein(urb->pipe))
520 pipe->handler = &usbhs_fifo_pio_pop_handler;
521 else
522 pipe->handler = &usbhs_fifo_pio_push_handler;
523
524 buf = (void *)(urb->transfer_buffer + urb->actual_length);
525 len = urb->transfer_buffer_length - urb->actual_length;
526
527 dev_dbg(dev, "%s\n", __func__);
528 usbhs_pkt_push(pipe, pkt, usbhsh_queue_done,
529 buf, len, (urb->transfer_flags & URB_ZERO_PACKET));
530 usbhs_pkt_start(pipe);
531
532 return 0;
533}
534
535/*
536 * DCP setup stage
537 */
538static int usbhsh_is_request_address(struct urb *urb)
539{
540 struct usb_ctrlrequest *cmd;
541
542 cmd = (struct usb_ctrlrequest *)urb->setup_packet;
543
544 if ((DeviceOutRequest == cmd->bRequestType << 8) &&
545 (USB_REQ_SET_ADDRESS == cmd->bRequest))
546 return 1;
547 else
548 return 0;
549}
550
551static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
552 struct urb *urb,
553 struct usbhs_pipe *pipe)
554{
555 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
556 struct usb_ctrlrequest req;
557 struct device *dev = usbhs_priv_to_dev(priv);
558
559 /*
560 * wait setup packet ACK
561 * see
562 * usbhsh_irq_setup_ack()
563 * usbhsh_irq_setup_err()
564 */
Kuninori Morimoto7fccd482011-10-23 22:55:54 -0700565 init_completion(&hpriv->setup_ack_done);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700566
567 /* copy original request */
568 memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
569
570 /*
571 * renesas_usbhs can not use original usb address.
572 * see HARDWARE LIMITATION.
573 * modify usb address here.
574 */
575 if (usbhsh_is_request_address(urb)) {
576 /* FIXME */
577 req.wValue = 1;
578 dev_dbg(dev, "create new address - %d\n", req.wValue);
579 }
580
581 /* set request */
582 usbhs_usbreq_set_val(priv, &req);
583
584 /*
585 * wait setup packet ACK
586 */
Kuninori Morimoto7fccd482011-10-23 22:55:54 -0700587 wait_for_completion(&hpriv->setup_ack_done);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700588
589 dev_dbg(dev, "%s done\n", __func__);
590}
591
592/*
593 * DCP data stage
594 */
595static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
596 struct usbhs_pkt *pkt)
597{
598 struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt);
599 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
600 struct urb *urb = ureq->urb;
601
602 /* this ureq was connected to urb when usbhsh_urb_enqueue() */
603
604 usbhsh_req_free(hpriv, ureq);
605 usbhsh_urb_to_ureq(urb) = NULL;
606}
607
608static void usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
609 struct urb *urb,
610 struct usbhs_pipe *pipe)
611{
612 struct usbhsh_request *ureq;
613 struct usbhs_pkt *pkt;
614
615 /*
616 * FIXME
617 *
618 * data stage uses ureq which is connected to urb
619 * see usbhsh_urb_enqueue() :: alloc new request.
620 * it will be freed in usbhsh_data_stage_packet_done()
621 */
622 ureq = usbhsh_urb_to_ureq(urb);
623 pkt = &ureq->pkt;
624
625 if (usb_pipein(urb->pipe))
626 pipe->handler = &usbhs_dcp_data_stage_in_handler;
627 else
628 pipe->handler = &usbhs_dcp_data_stage_out_handler;
629
630 usbhs_pkt_push(pipe, pkt,
631 usbhsh_data_stage_packet_done,
632 urb->transfer_buffer,
633 urb->transfer_buffer_length,
634 (urb->transfer_flags & URB_ZERO_PACKET));
635}
636
637/*
638 * DCP status stage
639 */
640static void usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
641 struct urb *urb,
642 struct usbhs_pipe *pipe)
643{
644 struct usbhsh_request *ureq;
645 struct usbhs_pkt *pkt;
646
647 /*
648 * FIXME
649 *
650 * status stage uses allocated ureq.
651 * it will be freed on usbhsh_queue_done()
652 */
653 ureq = usbhsh_req_alloc(hpriv, urb, GFP_KERNEL);
654 pkt = &ureq->pkt;
655
656 if (usb_pipein(urb->pipe))
657 pipe->handler = &usbhs_dcp_status_stage_in_handler;
658 else
659 pipe->handler = &usbhs_dcp_status_stage_out_handler;
660
661 usbhs_pkt_push(pipe, pkt,
662 usbhsh_queue_done,
663 NULL,
664 urb->transfer_buffer_length,
665 0);
666}
667
668static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
669 struct usbhsh_hpriv *hpriv,
670 struct usbhs_pipe *pipe,
671 struct urb *urb)
672{
673 struct device *dev = usbhsh_hcd_to_dev(hcd);
674
675 dev_dbg(dev, "%s\n", __func__);
676
677 /*
678 * setup stage
679 *
680 * usbhsh_send_setup_stage_packet() wait SACK/SIGN
681 */
682 usbhsh_setup_stage_packet_push(hpriv, urb, pipe);
683
684 /*
685 * data stage
686 *
687 * It is pushed only when urb has buffer.
688 */
689 if (urb->transfer_buffer_length)
690 usbhsh_data_stage_packet_push(hpriv, urb, pipe);
691
692 /*
693 * status stage
694 */
695 usbhsh_status_stage_packet_push(hpriv, urb, pipe);
696
697 /*
698 * start pushed packets
699 */
700 usbhs_pkt_start(pipe);
701
702 return 0;
703}
704
705/*
706 * dma map functions
707 */
708static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
709{
710 return 0;
711}
712
713/*
714 * for hc_driver
715 */
716static int usbhsh_host_start(struct usb_hcd *hcd)
717{
718 return 0;
719}
720
721static void usbhsh_host_stop(struct usb_hcd *hcd)
722{
723}
724
725static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
726 struct urb *urb,
727 gfp_t mem_flags)
728{
729 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
730 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
731 struct device *dev = usbhs_priv_to_dev(priv);
732 struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
733 struct usb_host_endpoint *ep = urb->ep;
734 struct usbhsh_request *ureq;
735 struct usbhsh_device *udev, *new_udev = NULL;
736 struct usbhs_pipe *pipe;
737 struct usbhsh_ep *uep;
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700738 int is_dir_in = usb_pipein(urb->pipe);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700739
740 int ret;
741
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700742 dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700743
744 ret = usb_hcd_link_urb_to_ep(hcd, urb);
745 if (ret)
746 goto usbhsh_urb_enqueue_error_not_linked;
747
748 /*
749 * get udev
750 */
751 udev = usbhsh_usbv_to_udev(usbv);
752 if (!udev) {
753 new_udev = usbhsh_device_alloc(hpriv, urb);
754 if (!new_udev)
755 goto usbhsh_urb_enqueue_error_not_linked;
756
757 udev = new_udev;
758 }
759
760 /*
761 * get uep
762 */
763 uep = usbhsh_ep_to_uep(ep);
764 if (!uep) {
Kuninori Morimoto73ef6352011-10-24 02:24:49 -0700765 uep = usbhsh_endpoint_alloc(hpriv, udev, ep,
766 is_dir_in, mem_flags);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700767 if (!uep)
768 goto usbhsh_urb_enqueue_error_free_device;
769 }
770 pipe = usbhsh_uep_to_pipe(uep);
771
772 /*
773 * alloc new request
774 */
775 ureq = usbhsh_req_alloc(hpriv, urb, mem_flags);
776 if (unlikely(!ureq)) {
777 ret = -ENOMEM;
778 goto usbhsh_urb_enqueue_error_free_endpoint;
779 }
780 usbhsh_urb_to_ureq(urb) = ureq;
781
782 /*
783 * push packet
784 */
785 if (usb_pipecontrol(urb->pipe))
786 usbhsh_dcp_queue_push(hcd, hpriv, pipe, urb);
787 else
788 usbhsh_queue_push(hcd, pipe, urb);
789
790 return 0;
791
792usbhsh_urb_enqueue_error_free_endpoint:
793 usbhsh_endpoint_free(hpriv, ep);
794usbhsh_urb_enqueue_error_free_device:
795 if (new_udev)
796 usbhsh_device_free(hpriv, new_udev);
797usbhsh_urb_enqueue_error_not_linked:
798
799 dev_dbg(dev, "%s error\n", __func__);
800
801 return ret;
802}
803
804static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
805{
806 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
807 struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
808
809 if (ureq) {
810 usbhsh_req_free(hpriv, ureq);
811 usbhsh_urb_to_ureq(urb) = NULL;
812 }
813
814 return 0;
815}
816
817static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
818 struct usb_host_endpoint *ep)
819{
820 struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
821 struct usbhsh_device *udev;
822 struct usbhsh_hpriv *hpriv;
823
824 /*
825 * this function might be called manytimes by same hcd/ep
826 * in-endpoitn == out-endpoint if ep == dcp.
827 */
828 if (!uep)
829 return;
830
831 udev = usbhsh_uep_to_udev(uep);
832 hpriv = usbhsh_hcd_to_hpriv(hcd);
833
834 usbhsh_endpoint_free(hpriv, ep);
835 ep->hcpriv = NULL;
836
837 /*
838 * if there is no endpoint,
839 * free device
840 */
841 if (!usbhsh_device_has_endpoint(udev))
842 usbhsh_device_free(hpriv, udev);
843}
844
845static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
846{
847 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
848 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
849 struct device *dev = usbhs_priv_to_dev(priv);
850 int roothub_id = 1; /* only 1 root hub */
851
852 /*
853 * does port stat was changed ?
854 * check USB_PORT_STAT_C_xxx << 16
855 */
856 if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
857 *buf = (1 << roothub_id);
858 else
859 *buf = 0;
860
861 dev_dbg(dev, "%s (%02x)\n", __func__, *buf);
862
863 return !!(*buf);
864}
865
866static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
867 u16 typeReq, u16 wValue,
868 u16 wIndex, char *buf, u16 wLength)
869{
870 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
871 struct device *dev = usbhs_priv_to_dev(priv);
872
873 switch (wValue) {
874 case C_HUB_OVER_CURRENT:
875 case C_HUB_LOCAL_POWER:
876 dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
877 return 0;
878 }
879
880 return -EPIPE;
881}
882
883static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
884 u16 typeReq, u16 wValue,
885 u16 wIndex, char *buf, u16 wLength)
886{
887 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
888 struct device *dev = usbhs_priv_to_dev(priv);
889 int enable = (typeReq == SetPortFeature);
890 int speed, i, timeout = 128;
891 int roothub_id = 1; /* only 1 root hub */
892
893 /* common error */
894 if (wIndex > roothub_id || wLength != 0)
895 return -EPIPE;
896
897 /* check wValue */
898 switch (wValue) {
899 case USB_PORT_FEAT_POWER:
900 usbhs_vbus_ctrl(priv, enable);
901 dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
902 break;
903
904 case USB_PORT_FEAT_ENABLE:
905 case USB_PORT_FEAT_SUSPEND:
906 case USB_PORT_FEAT_C_ENABLE:
907 case USB_PORT_FEAT_C_SUSPEND:
908 case USB_PORT_FEAT_C_CONNECTION:
909 case USB_PORT_FEAT_C_OVER_CURRENT:
910 case USB_PORT_FEAT_C_RESET:
911 dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
912 break;
913
914 case USB_PORT_FEAT_RESET:
915 if (!enable)
916 break;
917
918 usbhsh_port_stat_clear(hpriv,
919 USB_PORT_STAT_HIGH_SPEED |
920 USB_PORT_STAT_LOW_SPEED);
921
922 usbhs_bus_send_reset(priv);
923 msleep(20);
924 usbhs_bus_send_sof_enable(priv);
925
926 for (i = 0; i < timeout ; i++) {
927 switch (usbhs_bus_get_speed(priv)) {
928 case USB_SPEED_LOW:
929 speed = USB_PORT_STAT_LOW_SPEED;
930 goto got_usb_bus_speed;
931 case USB_SPEED_HIGH:
932 speed = USB_PORT_STAT_HIGH_SPEED;
933 goto got_usb_bus_speed;
934 case USB_SPEED_FULL:
935 speed = 0;
936 goto got_usb_bus_speed;
937 }
938
939 msleep(20);
940 }
941 return -EPIPE;
942
943got_usb_bus_speed:
944 usbhsh_port_stat_set(hpriv, speed);
945 usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);
946
947 dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
948 __func__, speed);
949
950 /* status change is not needed */
951 return 0;
952
953 default:
954 return -EPIPE;
955 }
956
957 /* set/clear status */
958 if (enable)
959 usbhsh_port_stat_set(hpriv, (1 << wValue));
960 else
961 usbhsh_port_stat_clear(hpriv, (1 << wValue));
962
963 return 0;
964}
965
966static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
967 u16 typeReq, u16 wValue,
968 u16 wIndex, char *buf, u16 wLength)
969{
970 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
971 struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
972 struct device *dev = usbhs_priv_to_dev(priv);
973 int roothub_id = 1; /* only 1 root hub */
974
975 switch (typeReq) {
976 case GetHubStatus:
977 dev_dbg(dev, "%s :: GetHubStatus\n", __func__);
978
979 *buf = 0x00;
980 break;
981
982 case GetPortStatus:
983 if (wIndex != roothub_id)
984 return -EPIPE;
985
986 dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
987 *(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
988 break;
989
990 case GetHubDescriptor:
991 desc->bDescriptorType = 0x29;
992 desc->bHubContrCurrent = 0;
993 desc->bNbrPorts = roothub_id;
994 desc->bDescLength = 9;
995 desc->bPwrOn2PwrGood = 0;
996 desc->wHubCharacteristics = cpu_to_le16(0x0011);
997 desc->u.hs.DeviceRemovable[0] = (roothub_id << 1);
998 desc->u.hs.DeviceRemovable[1] = ~0;
999 dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
1000 break;
1001 }
1002
1003 return 0;
1004}
1005
1006static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
1007 u16 wIndex, char *buf, u16 wLength)
1008{
1009 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
1010 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
1011 struct device *dev = usbhs_priv_to_dev(priv);
1012 int ret = -EPIPE;
1013
1014 switch (typeReq) {
1015
1016 /* Hub Feature */
1017 case ClearHubFeature:
1018 case SetHubFeature:
1019 ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
1020 wValue, wIndex, buf, wLength);
1021 break;
1022
1023 /* Port Feature */
1024 case SetPortFeature:
1025 case ClearPortFeature:
1026 ret = __usbhsh_hub_port_feature(hpriv, typeReq,
1027 wValue, wIndex, buf, wLength);
1028 break;
1029
1030 /* Get status */
1031 case GetHubStatus:
1032 case GetPortStatus:
1033 case GetHubDescriptor:
1034 ret = __usbhsh_hub_get_status(hpriv, typeReq,
1035 wValue, wIndex, buf, wLength);
1036 break;
1037 }
1038
1039 dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
1040 typeReq, ret, usbhsh_port_stat_get(hpriv));
1041
1042 return ret;
1043}
1044
1045static struct hc_driver usbhsh_driver = {
1046 .description = usbhsh_hcd_name,
1047 .hcd_priv_size = sizeof(struct usbhsh_hpriv),
1048
1049 /*
1050 * generic hardware linkage
1051 */
1052 .flags = HCD_USB2,
1053
1054 .start = usbhsh_host_start,
1055 .stop = usbhsh_host_stop,
1056
1057 /*
1058 * managing i/o requests and associated device resources
1059 */
1060 .urb_enqueue = usbhsh_urb_enqueue,
1061 .urb_dequeue = usbhsh_urb_dequeue,
1062 .endpoint_disable = usbhsh_endpoint_disable,
1063
1064 /*
1065 * root hub
1066 */
1067 .hub_status_data = usbhsh_hub_status_data,
1068 .hub_control = usbhsh_hub_control,
1069};
1070
1071/*
1072 * interrupt functions
1073 */
1074static int usbhsh_irq_attch(struct usbhs_priv *priv,
1075 struct usbhs_irq_state *irq_state)
1076{
1077 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1078 struct device *dev = usbhs_priv_to_dev(priv);
1079
1080 dev_dbg(dev, "device attached\n");
1081
1082 usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
1083 usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
1084
1085 return 0;
1086}
1087
1088static int usbhsh_irq_dtch(struct usbhs_priv *priv,
1089 struct usbhs_irq_state *irq_state)
1090{
1091 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1092 struct device *dev = usbhs_priv_to_dev(priv);
1093
1094 dev_dbg(dev, "device detached\n");
1095
1096 usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
1097 usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
1098
1099 return 0;
1100}
1101
1102static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
1103 struct usbhs_irq_state *irq_state)
1104{
1105 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1106 struct device *dev = usbhs_priv_to_dev(priv);
1107
1108 dev_dbg(dev, "setup packet OK\n");
1109
Kuninori Morimoto7fccd482011-10-23 22:55:54 -07001110 complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001111
1112 return 0;
1113}
1114
1115static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
1116 struct usbhs_irq_state *irq_state)
1117{
1118 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1119 struct device *dev = usbhs_priv_to_dev(priv);
1120
1121 dev_dbg(dev, "setup packet Err\n");
1122
Kuninori Morimoto7fccd482011-10-23 22:55:54 -07001123 complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001124
1125 return 0;
1126}
1127
1128/*
1129 * module start/stop
1130 */
1131static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
1132{
1133 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1134 struct usbhsh_pipe_info *pipe_info = hpriv->pipe_info;
1135 struct usbhs_pipe *pipe;
1136 u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
1137 int pipe_size = usbhs_get_dparam(priv, pipe_size);
1138 int old_type, dir_in, i;
1139
1140 /* init all pipe */
1141 old_type = USB_ENDPOINT_XFER_CONTROL;
1142 for (i = 0; i < pipe_size; i++) {
1143 pipe_info[i].usr_cnt = 0;
1144
1145 /*
1146 * data "output" will be finished as soon as possible,
1147 * but there is no guaranty at data "input" case.
1148 *
1149 * "input" needs "standby" pipe.
1150 * So, "input" direction pipe > "output" direction pipe
1151 * is good idea.
1152 *
1153 * 1st USB_ENDPOINT_XFER_xxx will be output direction,
1154 * and the other will be input direction here.
1155 *
1156 * ex)
1157 * ...
1158 * USB_ENDPOINT_XFER_ISOC -> dir out
1159 * USB_ENDPOINT_XFER_ISOC -> dir in
1160 * USB_ENDPOINT_XFER_BULK -> dir out
1161 * USB_ENDPOINT_XFER_BULK -> dir in
1162 * USB_ENDPOINT_XFER_BULK -> dir in
1163 * ...
1164 */
1165 dir_in = (pipe_type[i] == old_type);
1166 old_type = pipe_type[i];
1167
1168 if (USB_ENDPOINT_XFER_CONTROL == pipe_type[i]) {
1169 pipe = usbhs_dcp_malloc(priv);
1170 usbhsh_hpriv_to_dcp(hpriv) = pipe;
1171 } else {
1172 pipe = usbhs_pipe_malloc(priv,
1173 pipe_type[i],
1174 dir_in);
1175 }
1176
1177 pipe->mod_private = pipe_info + i;
1178 }
1179}
1180
1181static int usbhsh_start(struct usbhs_priv *priv)
1182{
1183 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1184 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
1185 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
1186 struct device *dev = usbhs_priv_to_dev(priv);
1187 int ret;
1188
1189 /* add hcd */
1190 ret = usb_add_hcd(hcd, 0, 0);
1191 if (ret < 0)
1192 return 0;
1193
1194 /*
1195 * pipe initialize and enable DCP
1196 */
1197 usbhs_pipe_init(priv,
1198 usbhsh_dma_map_ctrl);
1199 usbhs_fifo_init(priv);
1200 usbhsh_pipe_init_for_host(priv);
1201
1202 /*
1203 * system config enble
1204 * - HI speed
1205 * - host
1206 * - usb module
1207 */
1208 usbhs_sys_hispeed_ctrl(priv, 1);
1209 usbhs_sys_host_ctrl(priv, 1);
1210 usbhs_sys_usb_ctrl(priv, 1);
1211
1212 /*
1213 * enable irq callback
1214 */
1215 mod->irq_attch = usbhsh_irq_attch;
1216 mod->irq_dtch = usbhsh_irq_dtch;
1217 mod->irq_sack = usbhsh_irq_setup_ack;
1218 mod->irq_sign = usbhsh_irq_setup_err;
1219 usbhs_irq_callback_update(priv, mod);
1220
1221 dev_dbg(dev, "start host\n");
1222
1223 return ret;
1224}
1225
1226static int usbhsh_stop(struct usbhs_priv *priv)
1227{
1228 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1229 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
Kuninori Morimoto146ee502011-10-24 02:25:07 -07001230 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001231 struct device *dev = usbhs_priv_to_dev(priv);
1232
Kuninori Morimoto146ee502011-10-24 02:25:07 -07001233 /*
1234 * disable irq callback
1235 */
1236 mod->irq_attch = NULL;
1237 mod->irq_dtch = NULL;
1238 mod->irq_sack = NULL;
1239 mod->irq_sign = NULL;
1240 usbhs_irq_callback_update(priv, mod);
1241
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001242 usb_remove_hcd(hcd);
1243
1244 /* disable sys */
1245 usbhs_sys_hispeed_ctrl(priv, 0);
1246 usbhs_sys_host_ctrl(priv, 0);
1247 usbhs_sys_usb_ctrl(priv, 0);
1248
1249 dev_dbg(dev, "quit host\n");
1250
1251 return 0;
1252}
1253
Kuninori Morimotob7a8d172011-10-26 19:33:49 -07001254int usbhs_mod_host_probe(struct usbhs_priv *priv)
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001255{
1256 struct usbhsh_hpriv *hpriv;
1257 struct usb_hcd *hcd;
1258 struct usbhsh_pipe_info *pipe_info;
1259 struct usbhsh_device *udev;
1260 struct device *dev = usbhs_priv_to_dev(priv);
1261 int pipe_size = usbhs_get_dparam(priv, pipe_size);
1262 int i;
1263
1264 /* initialize hcd */
1265 hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
1266 if (!hcd) {
1267 dev_err(dev, "Failed to create hcd\n");
1268 return -ENOMEM;
1269 }
1270
1271 pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL);
1272 if (!pipe_info) {
1273 dev_err(dev, "Could not allocate pipe_info\n");
1274 goto usbhs_mod_host_probe_err;
1275 }
1276
1277 /*
1278 * CAUTION
1279 *
1280 * There is no guarantee that it is possible to access usb module here.
1281 * Don't accesses to it.
1282 * The accesse will be enable after "usbhsh_start"
1283 */
1284
1285 hpriv = usbhsh_hcd_to_hpriv(hcd);
1286
1287 /*
1288 * register itself
1289 */
1290 usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);
1291
1292 /* init hpriv */
1293 hpriv->mod.name = "host";
1294 hpriv->mod.start = usbhsh_start;
1295 hpriv->mod.stop = usbhsh_stop;
1296 hpriv->pipe_info = pipe_info;
1297 hpriv->pipe_size = pipe_size;
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001298 usbhsh_req_list_init(hpriv);
1299 usbhsh_port_stat_init(hpriv);
1300
1301 /* init all device */
1302 usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
1303 udev->usbv = NULL;
1304 INIT_LIST_HEAD(&udev->ep_list_head);
1305 }
1306
1307 dev_info(dev, "host probed\n");
1308
1309 return 0;
1310
1311usbhs_mod_host_probe_err:
1312 usb_put_hcd(hcd);
1313
1314 return -ENOMEM;
1315}
1316
Kuninori Morimotob7a8d172011-10-26 19:33:49 -07001317int usbhs_mod_host_remove(struct usbhs_priv *priv)
Kuninori Morimoto034d7c12011-10-10 22:07:40 -07001318{
1319 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
1320 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
1321
1322 usbhsh_req_list_quit(hpriv);
1323
1324 usb_put_hcd(hcd);
1325
1326 return 0;
1327}