drivers/acpi/pmic/intel_pmic_xpower.c

/*
 * intel_pmic_xpower.c - XPower AXP288 PMIC operation region driver
 *
 * Copyright (C) 2014 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License version
 * 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/mfd/axp20x.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
#include <linux/iio/consumer.h>
#include "intel_pmic.h"

#define XPOWER_GPADC_LOW	0x5b

static struct pmic_table power_table[] = {
	{
		.address = 0x00,
		.reg = 0x13,
		.bit = 0x05,
	},
	{
		.address = 0x04,
		.reg = 0x13,
		.bit = 0x06,
	},
	{
		.address = 0x08,
		.reg = 0x13,
		.bit = 0x07,
	},
	{
		.address = 0x0c,
		.reg = 0x12,
		.bit = 0x03,
	},
	{
		.address = 0x10,
		.reg = 0x12,
		.bit = 0x04,
	},
	{
		.address = 0x14,
		.reg = 0x12,
		.bit = 0x05,
	},
	{
		.address = 0x18,
		.reg = 0x12,
		.bit = 0x06,
	},
	{
		.address = 0x1c,
		.reg = 0x12,
		.bit = 0x00,
	},
	{
		.address = 0x20,
		.reg = 0x12,
		.bit = 0x01,
	},
	{
		.address = 0x24,
		.reg = 0x12,
		.bit = 0x02,
	},
	{
		.address = 0x28,
		.reg = 0x13,
		.bit = 0x02,
	},
	{
		.address = 0x2c,
		.reg = 0x13,
		.bit = 0x03,
	},
	{
		.address = 0x30,
		.reg = 0x13,
		.bit = 0x04,
	},
	{
		.address = 0x38,
		.reg = 0x10,
		.bit = 0x03,
	},
	{
		.address = 0x3c,
		.reg = 0x10,
		.bit = 0x06,
	},
	{
		.address = 0x40,
		.reg = 0x10,
		.bit = 0x05,
	},
	{
		.address = 0x44,
		.reg = 0x10,
		.bit = 0x04,
	},
	{
		.address = 0x48,
		.reg = 0x10,
		.bit = 0x01,
	},
	{
		.address = 0x4c,
		.reg = 0x10,
		.bit = 0x00
	},
};

/* TMP0 - TMP5 are the same, all from GPADC */
static struct pmic_table thermal_table[] = {
	{
		.address = 0x00,
		.reg = XPOWER_GPADC_LOW
	},
	{
		.address = 0x0c,
		.reg = XPOWER_GPADC_LOW
	},
	{
		.address = 0x18,
		.reg = XPOWER_GPADC_LOW
	},
	{
		.address = 0x24,
		.reg = XPOWER_GPADC_LOW
	},
	{
		.address = 0x30,
		.reg = XPOWER_GPADC_LOW
	},
	{
		.address = 0x3c,
		.reg = XPOWER_GPADC_LOW
	},
};

static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
				       int bit, u64 *value)
{
	int data;

	if (regmap_read(regmap, reg, &data))
		return -EIO;

	*value = (data & BIT(bit)) ? 1 : 0;
	return 0;
}

static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
					  int bit, bool on)
{
	int data;

	if (regmap_read(regmap, reg, &data))
		return -EIO;

	if (on)
		data |= BIT(bit);
	else
		data &= ~BIT(bit);

	if (regmap_write(regmap, reg, data))
		return -EIO;

	return 0;
}

/**
 * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC
 *
 * @regmap: regmap of the PMIC device
 * @reg: register to get the reading
 *
 * We could get the sensor value by manipulating the HW regs here, but since
 * the axp288 IIO driver may also access the same regs at the same time, the
 * APIs provided by IIO subsystem are used here instead to avoid problems. As
 * a result, the two passed in params are of no actual use.
 *
 * Return a positive value on success, errno on failure.
 */
static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
{
	struct iio_channel *gpadc_chan;
	int ret, val;

	gpadc_chan = iio_channel_get(NULL, "axp288-system-temp");
	if (IS_ERR_OR_NULL(gpadc_chan))
		return -EACCES;

	ret = iio_read_channel_raw(gpadc_chan, &val);
	if (ret < 0)
		val = ret;

	iio_channel_release(gpadc_chan);
	return val;
}

static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
	.get_power = intel_xpower_pmic_get_power,
	.update_power = intel_xpower_pmic_update_power,
	.get_raw_temp = intel_xpower_pmic_get_raw_temp,
	.power_table = power_table,
	.power_table_count = ARRAY_SIZE(power_table),
	.thermal_table = thermal_table,
	.thermal_table_count = ARRAY_SIZE(thermal_table),
};


static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev)
{
	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
	return intel_pmic_install_opregion_handler(&pdev->dev,
			ACPI_HANDLE(pdev->dev.parent), axp20x->regmap,
			&intel_xpower_pmic_opregion_data);
}

static struct platform_driver intel_xpower_pmic_opregion_driver = {
	.probe = intel_xpower_pmic_opregion_probe,
	.driver = {
		.name = "axp288_pmic_acpi",
	},
};

static int __init intel_xpower_pmic_opregion_driver_init(void)
{
	return platform_driver_register(&intel_xpower_pmic_opregion_driver);
}
module_init(intel_xpower_pmic_opregion_driver_init);

MODULE_DESCRIPTION("XPower AXP288 ACPI operation region driver");
MODULE_LICENSE("GPL");