blob: 52f53e2e70c3c2cf6e89e8069f93dddbec24c806 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * I2O kernel space accessible structures/APIs
3 *
4 * (c) Copyright 1999, 2000 Red Hat Software
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 *
11 *************************************************************************
12 *
13 * This header file defined the I2O APIs/structures for use by
14 * the I2O kernel modules.
15 *
16 */
17
18#ifndef _I2O_H
19#define _I2O_H
20
21#ifdef __KERNEL__ /* This file to be included by kernel only */
22
23#include <linux/i2o-dev.h>
24
25/* How many different OSM's are we allowing */
26#define I2O_MAX_DRIVERS 8
27
Linus Torvalds1da177e2005-04-16 15:20:36 -070028#include <linux/pci.h>
29#include <linux/dma-mapping.h>
Tim Schmielau4e57b682005-10-30 15:03:48 -080030#include <linux/string.h>
31#include <linux/slab.h>
32#include <linux/workqueue.h> /* work_struct */
Markus Lidela1a5ea72006-01-06 00:19:29 -080033#include <linux/mempool.h>
Tim Schmielau4e57b682005-10-30 15:03:48 -080034
35#include <asm/io.h>
36#include <asm/semaphore.h> /* Needed for MUTEX init macros */
Linus Torvalds1da177e2005-04-16 15:20:36 -070037
38/* message queue empty */
39#define I2O_QUEUE_EMPTY 0xffffffff
40
41/*
Linus Torvalds1da177e2005-04-16 15:20:36 -070042 * Cache strategies
43 */
44
45/* The NULL strategy leaves everything up to the controller. This tends to be a
46 * pessimal but functional choice.
47 */
48#define CACHE_NULL 0
49/* Prefetch data when reading. We continually attempt to load the next 32 sectors
50 * into the controller cache.
51 */
52#define CACHE_PREFETCH 1
53/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors
54 * into the controller cache. When an I/O is less <= 8K we assume its probably
55 * not sequential and don't prefetch (default)
56 */
57#define CACHE_SMARTFETCH 2
58/* Data is written to the cache and then out on to the disk. The I/O must be
59 * physically on the medium before the write is acknowledged (default without
60 * NVRAM)
61 */
62#define CACHE_WRITETHROUGH 17
63/* Data is written to the cache and then out on to the disk. The controller
64 * is permitted to write back the cache any way it wants. (default if battery
65 * backed NVRAM is present). It can be useful to set this for swap regardless of
66 * battery state.
67 */
68#define CACHE_WRITEBACK 18
69/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
70 * write large I/O's directly to disk bypassing the cache to avoid the extra
71 * memory copy hits. Small writes are writeback cached
72 */
73#define CACHE_SMARTBACK 19
74/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
75 * write large I/O's directly to disk bypassing the cache to avoid the extra
76 * memory copy hits. Small writes are writethrough cached. Suitable for devices
77 * lacking battery backup
78 */
79#define CACHE_SMARTTHROUGH 20
80
81/*
82 * Ioctl structures
83 */
84
85#define BLKI2OGRSTRAT _IOR('2', 1, int)
86#define BLKI2OGWSTRAT _IOR('2', 2, int)
87#define BLKI2OSRSTRAT _IOW('2', 3, int)
88#define BLKI2OSWSTRAT _IOW('2', 4, int)
89
90/*
91 * I2O Function codes
92 */
93
94/*
95 * Executive Class
96 */
97#define I2O_CMD_ADAPTER_ASSIGN 0xB3
98#define I2O_CMD_ADAPTER_READ 0xB2
99#define I2O_CMD_ADAPTER_RELEASE 0xB5
100#define I2O_CMD_BIOS_INFO_SET 0xA5
101#define I2O_CMD_BOOT_DEVICE_SET 0xA7
102#define I2O_CMD_CONFIG_VALIDATE 0xBB
103#define I2O_CMD_CONN_SETUP 0xCA
104#define I2O_CMD_DDM_DESTROY 0xB1
105#define I2O_CMD_DDM_ENABLE 0xD5
106#define I2O_CMD_DDM_QUIESCE 0xC7
107#define I2O_CMD_DDM_RESET 0xD9
108#define I2O_CMD_DDM_SUSPEND 0xAF
109#define I2O_CMD_DEVICE_ASSIGN 0xB7
110#define I2O_CMD_DEVICE_RELEASE 0xB9
111#define I2O_CMD_HRT_GET 0xA8
112#define I2O_CMD_ADAPTER_CLEAR 0xBE
113#define I2O_CMD_ADAPTER_CONNECT 0xC9
114#define I2O_CMD_ADAPTER_RESET 0xBD
115#define I2O_CMD_LCT_NOTIFY 0xA2
116#define I2O_CMD_OUTBOUND_INIT 0xA1
117#define I2O_CMD_PATH_ENABLE 0xD3
118#define I2O_CMD_PATH_QUIESCE 0xC5
119#define I2O_CMD_PATH_RESET 0xD7
120#define I2O_CMD_STATIC_MF_CREATE 0xDD
121#define I2O_CMD_STATIC_MF_RELEASE 0xDF
122#define I2O_CMD_STATUS_GET 0xA0
123#define I2O_CMD_SW_DOWNLOAD 0xA9
124#define I2O_CMD_SW_UPLOAD 0xAB
125#define I2O_CMD_SW_REMOVE 0xAD
126#define I2O_CMD_SYS_ENABLE 0xD1
127#define I2O_CMD_SYS_MODIFY 0xC1
128#define I2O_CMD_SYS_QUIESCE 0xC3
129#define I2O_CMD_SYS_TAB_SET 0xA3
130
131/*
132 * Utility Class
133 */
134#define I2O_CMD_UTIL_NOP 0x00
135#define I2O_CMD_UTIL_ABORT 0x01
136#define I2O_CMD_UTIL_CLAIM 0x09
137#define I2O_CMD_UTIL_RELEASE 0x0B
138#define I2O_CMD_UTIL_PARAMS_GET 0x06
139#define I2O_CMD_UTIL_PARAMS_SET 0x05
140#define I2O_CMD_UTIL_EVT_REGISTER 0x13
141#define I2O_CMD_UTIL_EVT_ACK 0x14
142#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10
143#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D
144#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F
145#define I2O_CMD_UTIL_LOCK 0x17
146#define I2O_CMD_UTIL_LOCK_RELEASE 0x19
147#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15
148
149/*
150 * SCSI Host Bus Adapter Class
151 */
152#define I2O_CMD_SCSI_EXEC 0x81
153#define I2O_CMD_SCSI_ABORT 0x83
154#define I2O_CMD_SCSI_BUSRESET 0x27
155
156/*
Markus Lidelf10378f2005-06-23 22:02:16 -0700157 * Bus Adapter Class
158 */
159#define I2O_CMD_BUS_ADAPTER_RESET 0x85
160#define I2O_CMD_BUS_RESET 0x87
161#define I2O_CMD_BUS_SCAN 0x89
162#define I2O_CMD_BUS_QUIESCE 0x8b
163
164/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165 * Random Block Storage Class
166 */
167#define I2O_CMD_BLOCK_READ 0x30
168#define I2O_CMD_BLOCK_WRITE 0x31
169#define I2O_CMD_BLOCK_CFLUSH 0x37
170#define I2O_CMD_BLOCK_MLOCK 0x49
171#define I2O_CMD_BLOCK_MUNLOCK 0x4B
172#define I2O_CMD_BLOCK_MMOUNT 0x41
173#define I2O_CMD_BLOCK_MEJECT 0x43
174#define I2O_CMD_BLOCK_POWER 0x70
175
Markus Lidelb2aaee32005-06-23 22:02:19 -0700176#define I2O_CMD_PRIVATE 0xFF
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177
178/* Command status values */
179
180#define I2O_CMD_IN_PROGRESS 0x01
181#define I2O_CMD_REJECTED 0x02
182#define I2O_CMD_FAILED 0x03
183#define I2O_CMD_COMPLETED 0x04
184
185/* I2O API function return values */
186
187#define I2O_RTN_NO_ERROR 0
188#define I2O_RTN_NOT_INIT 1
189#define I2O_RTN_FREE_Q_EMPTY 2
190#define I2O_RTN_TCB_ERROR 3
191#define I2O_RTN_TRANSACTION_ERROR 4
192#define I2O_RTN_ADAPTER_ALREADY_INIT 5
193#define I2O_RTN_MALLOC_ERROR 6
194#define I2O_RTN_ADPTR_NOT_REGISTERED 7
195#define I2O_RTN_MSG_REPLY_TIMEOUT 8
196#define I2O_RTN_NO_STATUS 9
197#define I2O_RTN_NO_FIRM_VER 10
198#define I2O_RTN_NO_LINK_SPEED 11
199
200/* Reply message status defines for all messages */
201
202#define I2O_REPLY_STATUS_SUCCESS 0x00
203#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
204#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
205#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03
206#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04
207#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05
208#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06
209#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08
210#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09
211#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A
212#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B
213#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80
214
215/* Status codes and Error Information for Parameter functions */
216
217#define I2O_PARAMS_STATUS_SUCCESS 0x00
218#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01
219#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02
220#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03
221#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04
222#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05
223#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06
224#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07
225#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08
226#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09
227#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A
228#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B
229#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C
230#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D
231#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E
232#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F
233#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10
234
235/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
236 * messages: Table 3-2 Detailed Status Codes.*/
237
238#define I2O_DSC_SUCCESS 0x0000
239#define I2O_DSC_BAD_KEY 0x0002
240#define I2O_DSC_TCL_ERROR 0x0003
241#define I2O_DSC_REPLY_BUFFER_FULL 0x0004
242#define I2O_DSC_NO_SUCH_PAGE 0x0005
243#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006
244#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007
245#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009
246#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A
247#define I2O_DSC_DEVICE_LOCKED 0x000B
248#define I2O_DSC_DEVICE_RESET 0x000C
249#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D
250#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E
251#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F
252#define I2O_DSC_INVALID_OFFSET 0x0010
253#define I2O_DSC_INVALID_PARAMETER 0x0011
254#define I2O_DSC_INVALID_REQUEST 0x0012
255#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013
256#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014
257#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015
258#define I2O_DSC_MISSING_PARAMETER 0x0016
259#define I2O_DSC_TIMEOUT 0x0017
260#define I2O_DSC_UNKNOWN_ERROR 0x0018
261#define I2O_DSC_UNKNOWN_FUNCTION 0x0019
262#define I2O_DSC_UNSUPPORTED_VERSION 0x001A
263#define I2O_DSC_DEVICE_BUSY 0x001B
264#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C
265
266/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
267 Status Codes.*/
268
269#define I2O_BSA_DSC_SUCCESS 0x0000
270#define I2O_BSA_DSC_MEDIA_ERROR 0x0001
271#define I2O_BSA_DSC_ACCESS_ERROR 0x0002
272#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003
273#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004
274#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005
275#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006
276#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007
277#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008
278#define I2O_BSA_DSC_BUS_FAILURE 0x0009
279#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A
280#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B
281#define I2O_BSA_DSC_DEVICE_RESET 0x000C
282#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D
283#define I2O_BSA_DSC_TIMEOUT 0x000E
284
285/* FailureStatusCodes, Table 3-3 Message Failure Codes */
286
287#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81
288#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82
289#define I2O_FSC_TRANSPORT_CONGESTION 0x83
290#define I2O_FSC_TRANSPORT_FAILURE 0x84
291#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85
292#define I2O_FSC_TRANSPORT_TIME_OUT 0x86
293#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87
294#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88
295#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89
296#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A
297#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B
298#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C
299#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D
300#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E
301#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F
302#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF
303
304/* Device Claim Types */
305#define I2O_CLAIM_PRIMARY 0x01000000
306#define I2O_CLAIM_MANAGEMENT 0x02000000
307#define I2O_CLAIM_AUTHORIZED 0x03000000
308#define I2O_CLAIM_SECONDARY 0x04000000
309
310/* Message header defines for VersionOffset */
311#define I2OVER15 0x0001
312#define I2OVER20 0x0002
313
Markus Lidelf88e1192005-06-23 22:02:14 -0700314/* Default is 1.5 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700315#define I2OVERSION I2OVER15
316
317#define SGL_OFFSET_0 I2OVERSION
318#define SGL_OFFSET_4 (0x0040 | I2OVERSION)
319#define SGL_OFFSET_5 (0x0050 | I2OVERSION)
320#define SGL_OFFSET_6 (0x0060 | I2OVERSION)
321#define SGL_OFFSET_7 (0x0070 | I2OVERSION)
322#define SGL_OFFSET_8 (0x0080 | I2OVERSION)
323#define SGL_OFFSET_9 (0x0090 | I2OVERSION)
324#define SGL_OFFSET_10 (0x00A0 | I2OVERSION)
Markus Lidelb2aaee32005-06-23 22:02:19 -0700325#define SGL_OFFSET_11 (0x00B0 | I2OVERSION)
326#define SGL_OFFSET_12 (0x00C0 | I2OVERSION)
327#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328
329/* Transaction Reply Lists (TRL) Control Word structure */
330#define TRL_SINGLE_FIXED_LENGTH 0x00
331#define TRL_SINGLE_VARIABLE_LENGTH 0x40
332#define TRL_MULTIPLE_FIXED_LENGTH 0x80
333
334 /* msg header defines for MsgFlags */
335#define MSG_STATIC 0x0100
336#define MSG_64BIT_CNTXT 0x0200
337#define MSG_MULTI_TRANS 0x1000
338#define MSG_FAIL 0x2000
339#define MSG_FINAL 0x4000
340#define MSG_REPLY 0x8000
341
342 /* minimum size msg */
343#define THREE_WORD_MSG_SIZE 0x00030000
344#define FOUR_WORD_MSG_SIZE 0x00040000
345#define FIVE_WORD_MSG_SIZE 0x00050000
346#define SIX_WORD_MSG_SIZE 0x00060000
347#define SEVEN_WORD_MSG_SIZE 0x00070000
348#define EIGHT_WORD_MSG_SIZE 0x00080000
349#define NINE_WORD_MSG_SIZE 0x00090000
350#define TEN_WORD_MSG_SIZE 0x000A0000
351#define ELEVEN_WORD_MSG_SIZE 0x000B0000
352#define I2O_MESSAGE_SIZE(x) ((x)<<16)
353
Markus Lidel9e875452005-06-23 22:02:21 -0700354/* special TID assignments */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700355#define ADAPTER_TID 0
356#define HOST_TID 1
357
Markus Lidel9e875452005-06-23 22:02:21 -0700358/* outbound queue defines */
359#define I2O_MAX_OUTBOUND_MSG_FRAMES 128
360#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361
Markus Lidela1a5ea72006-01-06 00:19:29 -0800362/* inbound queue definitions */
363#define I2O_MSG_INPOOL_MIN 32
364#define I2O_INBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */
365
Linus Torvalds1da177e2005-04-16 15:20:36 -0700366#define I2O_POST_WAIT_OK 0
367#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT
368
369#define I2O_CONTEXT_LIST_MIN_LENGTH 15
370#define I2O_CONTEXT_LIST_USED 0x01
371#define I2O_CONTEXT_LIST_DELETED 0x02
372
373/* timeouts */
374#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15
375#define I2O_TIMEOUT_MESSAGE_GET 5
376#define I2O_TIMEOUT_RESET 30
377#define I2O_TIMEOUT_STATUS_GET 5
378#define I2O_TIMEOUT_LCT_GET 360
379#define I2O_TIMEOUT_SCSI_SCB_ABORT 240
380
381/* retries */
382#define I2O_HRT_GET_TRIES 3
383#define I2O_LCT_GET_TRIES 3
384
Markus Lidelb2aaee32005-06-23 22:02:19 -0700385/* defines for max_sectors and max_phys_segments */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386#define I2O_MAX_SECTORS 1024
Markus Lideldcceafe2006-01-06 00:19:32 -0800387#define I2O_MAX_SECTORS_LIMITED 128
Markus Lidelf10378f2005-06-23 22:02:16 -0700388#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700389
Markus Lidela1a5ea72006-01-06 00:19:29 -0800390/*
391 * Message structures
392 */
393struct i2o_message {
394 union {
395 struct {
396 u8 version_offset;
397 u8 flags;
398 u16 size;
399 u32 target_tid:12;
400 u32 init_tid:12;
401 u32 function:8;
402 u32 icntxt; /* initiator context */
403 u32 tcntxt; /* transaction context */
404 } s;
405 u32 head[4];
406 } u;
407 /* List follows */
408 u32 body[0];
409};
410
411/* MFA and I2O message used by mempool */
412struct i2o_msg_mfa {
413 u32 mfa; /* MFA returned by the controller */
414 struct i2o_message msg; /* I2O message */
415};
416
417/*
418 * Each I2O device entity has one of these. There is one per device.
419 */
420struct i2o_device {
421 i2o_lct_entry lct_data; /* Device LCT information */
422
423 struct i2o_controller *iop; /* Controlling IOP */
424 struct list_head list; /* node in IOP devices list */
425
426 struct device device;
427
428 struct semaphore lock; /* device lock */
429};
430
431/*
432 * Event structure provided to the event handling function
433 */
434struct i2o_event {
435 struct work_struct work;
436 struct i2o_device *i2o_dev; /* I2O device pointer from which the
437 event reply was initiated */
438 u16 size; /* Size of data in 32-bit words */
439 u32 tcntxt; /* Transaction context used at
440 registration */
441 u32 event_indicator; /* Event indicator from reply */
442 u32 data[0]; /* Event data from reply */
443};
444
445/*
446 * I2O classes which could be handled by the OSM
447 */
448struct i2o_class_id {
449 u16 class_id:12;
450};
451
452/*
453 * I2O driver structure for OSMs
454 */
455struct i2o_driver {
456 char *name; /* OSM name */
457 int context; /* Low 8 bits of the transaction info */
458 struct i2o_class_id *classes; /* I2O classes that this OSM handles */
459
460 /* Message reply handler */
461 int (*reply) (struct i2o_controller *, u32, struct i2o_message *);
462
463 /* Event handler */
David Howellsc4028952006-11-22 14:57:56 +0000464 work_func_t event;
Markus Lidela1a5ea72006-01-06 00:19:29 -0800465
466 struct workqueue_struct *event_queue; /* Event queue */
467
468 struct device_driver driver;
469
470 /* notification of changes */
471 void (*notify_controller_add) (struct i2o_controller *);
472 void (*notify_controller_remove) (struct i2o_controller *);
473 void (*notify_device_add) (struct i2o_device *);
474 void (*notify_device_remove) (struct i2o_device *);
475
476 struct semaphore lock;
477};
478
479/*
480 * Contains DMA mapped address information
481 */
482struct i2o_dma {
483 void *virt;
484 dma_addr_t phys;
485 size_t len;
486};
487
488/*
489 * Contains slab cache and mempool information
490 */
491struct i2o_pool {
492 char *name;
Christoph Lametere18b8902006-12-06 20:33:20 -0800493 struct kmem_cache *slab;
Markus Lidela1a5ea72006-01-06 00:19:29 -0800494 mempool_t *mempool;
495};
496
497/*
498 * Contains IO mapped address information
499 */
500struct i2o_io {
501 void __iomem *virt;
502 unsigned long phys;
503 unsigned long len;
504};
505
506/*
507 * Context queue entry, used for 32-bit context on 64-bit systems
508 */
509struct i2o_context_list_element {
510 struct list_head list;
511 u32 context;
512 void *ptr;
513 unsigned long timestamp;
514};
515
516/*
517 * Each I2O controller has one of these objects
518 */
519struct i2o_controller {
520 char name[16];
521 int unit;
522 int type;
523
524 struct pci_dev *pdev; /* PCI device */
525
526 unsigned int promise:1; /* Promise controller */
527 unsigned int adaptec:1; /* DPT / Adaptec controller */
528 unsigned int raptor:1; /* split bar */
529 unsigned int no_quiesce:1; /* dont quiesce before reset */
530 unsigned int short_req:1; /* use small block sizes */
531 unsigned int limit_sectors:1; /* limit number of sectors / request */
532 unsigned int pae_support:1; /* controller has 64-bit SGL support */
533
534 struct list_head devices; /* list of I2O devices */
535 struct list_head list; /* Controller list */
536
537 void __iomem *in_port; /* Inbout port address */
538 void __iomem *out_port; /* Outbound port address */
539 void __iomem *irq_status; /* Interrupt status register address */
540 void __iomem *irq_mask; /* Interrupt mask register address */
541
542 struct i2o_dma status; /* IOP status block */
543
544 struct i2o_dma hrt; /* HW Resource Table */
545 i2o_lct *lct; /* Logical Config Table */
546 struct i2o_dma dlct; /* Temp LCT */
547 struct semaphore lct_lock; /* Lock for LCT updates */
548 struct i2o_dma status_block; /* IOP status block */
549
550 struct i2o_io base; /* controller messaging unit */
551 struct i2o_io in_queue; /* inbound message queue Host->IOP */
552 struct i2o_dma out_queue; /* outbound message queue IOP->Host */
553
554 struct i2o_pool in_msg; /* mempool for inbound messages */
555
556 unsigned int battery:1; /* Has a battery backup */
557 unsigned int io_alloc:1; /* An I/O resource was allocated */
558 unsigned int mem_alloc:1; /* A memory resource was allocated */
559
560 struct resource io_resource; /* I/O resource allocated to the IOP */
561 struct resource mem_resource; /* Mem resource allocated to the IOP */
562
563 struct device device;
Markus Lidela1a5ea72006-01-06 00:19:29 -0800564 struct i2o_device *exec; /* Executive */
565#if BITS_PER_LONG == 64
566 spinlock_t context_list_lock; /* lock for context_list */
567 atomic_t context_list_counter; /* needed for unique contexts */
568 struct list_head context_list; /* list of context id's
569 and pointers */
570#endif
571 spinlock_t lock; /* lock for controller
572 configuration */
573
574 void *driver_data[I2O_MAX_DRIVERS]; /* storage for drivers */
575};
576
577/*
578 * I2O System table entry
579 *
580 * The system table contains information about all the IOPs in the
581 * system. It is sent to all IOPs so that they can create peer2peer
582 * connections between them.
583 */
584struct i2o_sys_tbl_entry {
585 u16 org_id;
586 u16 reserved1;
587 u32 iop_id:12;
588 u32 reserved2:20;
589 u16 seg_num:12;
590 u16 i2o_version:4;
591 u8 iop_state;
592 u8 msg_type;
593 u16 frame_size;
594 u16 reserved3;
595 u32 last_changed;
596 u32 iop_capabilities;
597 u32 inbound_low;
598 u32 inbound_high;
599};
600
601struct i2o_sys_tbl {
602 u8 num_entries;
603 u8 version;
604 u16 reserved1;
605 u32 change_ind;
606 u32 reserved2;
607 u32 reserved3;
608 struct i2o_sys_tbl_entry iops[0];
609};
610
611extern struct list_head i2o_controllers;
612
613/* Message functions */
614static inline struct i2o_message *i2o_msg_get(struct i2o_controller *);
615extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int);
616static inline void i2o_msg_post(struct i2o_controller *, struct i2o_message *);
617static inline int i2o_msg_post_wait(struct i2o_controller *,
618 struct i2o_message *, unsigned long);
619extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *,
620 unsigned long, struct i2o_dma *);
621static inline void i2o_flush_reply(struct i2o_controller *, u32);
622
623/* IOP functions */
624extern int i2o_status_get(struct i2o_controller *);
625
626extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int,
627 u32);
628extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16);
629extern struct i2o_controller *i2o_find_iop(int);
630
631/* Functions needed for handling 64-bit pointers in 32-bit context */
632#if BITS_PER_LONG == 64
633extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *);
634extern void *i2o_cntxt_list_get(struct i2o_controller *, u32);
635extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *);
636extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *);
637
638static inline u32 i2o_ptr_low(void *ptr)
639{
640 return (u32) (u64) ptr;
641};
642
643static inline u32 i2o_ptr_high(void *ptr)
644{
645 return (u32) ((u64) ptr >> 32);
646};
647
648static inline u32 i2o_dma_low(dma_addr_t dma_addr)
649{
650 return (u32) (u64) dma_addr;
651};
652
653static inline u32 i2o_dma_high(dma_addr_t dma_addr)
654{
655 return (u32) ((u64) dma_addr >> 32);
656};
657#else
658static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
659{
660 return (u32) ptr;
661};
662
663static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
664{
665 return (void *)context;
666};
667
668static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr)
669{
670 return (u32) ptr;
671};
672
673static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr)
674{
675 return (u32) ptr;
676};
677
678static inline u32 i2o_ptr_low(void *ptr)
679{
680 return (u32) ptr;
681};
682
683static inline u32 i2o_ptr_high(void *ptr)
684{
685 return 0;
686};
687
688static inline u32 i2o_dma_low(dma_addr_t dma_addr)
689{
690 return (u32) dma_addr;
691};
692
693static inline u32 i2o_dma_high(dma_addr_t dma_addr)
694{
695 return 0;
696};
697#endif
698
699/**
700 * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL
701 * @c: I2O controller for which the calculation should be done
702 * @body_size: maximum body size used for message in 32-bit words.
703 *
704 * Return the maximum number of SG elements in a SG list.
705 */
706static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size)
707{
708 i2o_status_block *sb = c->status_block.virt;
709 u16 sg_count =
710 (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) -
711 body_size;
712
713 if (c->pae_support) {
714 /*
715 * for 64-bit a SG attribute element must be added and each
716 * SG element needs 12 bytes instead of 8.
717 */
718 sg_count -= 2;
719 sg_count /= 3;
720 } else
721 sg_count /= 2;
722
723 if (c->short_req && (sg_count > 8))
724 sg_count = 8;
725
726 return sg_count;
727};
728
729/**
730 * i2o_dma_map_single - Map pointer to controller and fill in I2O message.
731 * @c: I2O controller
732 * @ptr: pointer to the data which should be mapped
733 * @size: size of data in bytes
734 * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
735 * @sg_ptr: pointer to the SG list inside the I2O message
736 *
737 * This function does all necessary DMA handling and also writes the I2O
738 * SGL elements into the I2O message. For details on DMA handling see also
739 * dma_map_single(). The pointer sg_ptr will only be set to the end of the
740 * SG list if the allocation was successful.
741 *
742 * Returns DMA address which must be checked for failures using
743 * dma_mapping_error().
744 */
745static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
746 size_t size,
747 enum dma_data_direction direction,
748 u32 ** sg_ptr)
749{
750 u32 sg_flags;
751 u32 *mptr = *sg_ptr;
752 dma_addr_t dma_addr;
753
754 switch (direction) {
755 case DMA_TO_DEVICE:
756 sg_flags = 0xd4000000;
757 break;
758 case DMA_FROM_DEVICE:
759 sg_flags = 0xd0000000;
760 break;
761 default:
762 return 0;
763 }
764
765 dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction);
766 if (!dma_mapping_error(dma_addr)) {
767#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
768 if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
769 *mptr++ = cpu_to_le32(0x7C020002);
770 *mptr++ = cpu_to_le32(PAGE_SIZE);
771 }
772#endif
773
774 *mptr++ = cpu_to_le32(sg_flags | size);
775 *mptr++ = cpu_to_le32(i2o_dma_low(dma_addr));
776#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
777 if ((sizeof(dma_addr_t) > 4) && c->pae_support)
778 *mptr++ = cpu_to_le32(i2o_dma_high(dma_addr));
779#endif
780 *sg_ptr = mptr;
781 }
782 return dma_addr;
783};
784
785/**
786 * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message.
787 * @c: I2O controller
788 * @sg: SG list to be mapped
789 * @sg_count: number of elements in the SG list
790 * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
791 * @sg_ptr: pointer to the SG list inside the I2O message
792 *
793 * This function does all necessary DMA handling and also writes the I2O
794 * SGL elements into the I2O message. For details on DMA handling see also
795 * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG
796 * list if the allocation was successful.
797 *
798 * Returns 0 on failure or 1 on success.
799 */
800static inline int i2o_dma_map_sg(struct i2o_controller *c,
801 struct scatterlist *sg, int sg_count,
802 enum dma_data_direction direction,
803 u32 ** sg_ptr)
804{
805 u32 sg_flags;
806 u32 *mptr = *sg_ptr;
807
808 switch (direction) {
809 case DMA_TO_DEVICE:
810 sg_flags = 0x14000000;
811 break;
812 case DMA_FROM_DEVICE:
813 sg_flags = 0x10000000;
814 break;
815 default:
816 return 0;
817 }
818
819 sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction);
820 if (!sg_count)
821 return 0;
822
823#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
824 if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
825 *mptr++ = cpu_to_le32(0x7C020002);
826 *mptr++ = cpu_to_le32(PAGE_SIZE);
827 }
828#endif
829
830 while (sg_count-- > 0) {
831 if (!sg_count)
832 sg_flags |= 0xC0000000;
833 *mptr++ = cpu_to_le32(sg_flags | sg_dma_len(sg));
834 *mptr++ = cpu_to_le32(i2o_dma_low(sg_dma_address(sg)));
835#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
836 if ((sizeof(dma_addr_t) > 4) && c->pae_support)
837 *mptr++ = cpu_to_le32(i2o_dma_high(sg_dma_address(sg)));
838#endif
839 sg++;
840 }
841 *sg_ptr = mptr;
842
843 return 1;
844};
845
846/**
847 * i2o_dma_alloc - Allocate DMA memory
848 * @dev: struct device pointer to the PCI device of the I2O controller
849 * @addr: i2o_dma struct which should get the DMA buffer
850 * @len: length of the new DMA memory
851 * @gfp_mask: GFP mask
852 *
853 * Allocate a coherent DMA memory and write the pointers into addr.
854 *
855 * Returns 0 on success or -ENOMEM on failure.
856 */
857static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
858 size_t len, gfp_t gfp_mask)
859{
860 struct pci_dev *pdev = to_pci_dev(dev);
861 int dma_64 = 0;
862
863 if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) {
864 dma_64 = 1;
865 if (pci_set_dma_mask(pdev, DMA_32BIT_MASK))
866 return -ENOMEM;
867 }
868
869 addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
870
871 if ((sizeof(dma_addr_t) > 4) && dma_64)
872 if (pci_set_dma_mask(pdev, DMA_64BIT_MASK))
873 printk(KERN_WARNING "i2o: unable to set 64-bit DMA");
874
875 if (!addr->virt)
876 return -ENOMEM;
877
878 memset(addr->virt, 0, len);
879 addr->len = len;
880
881 return 0;
882};
883
884/**
885 * i2o_dma_free - Free DMA memory
886 * @dev: struct device pointer to the PCI device of the I2O controller
887 * @addr: i2o_dma struct which contains the DMA buffer
888 *
889 * Free a coherent DMA memory and set virtual address of addr to NULL.
890 */
891static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr)
892{
893 if (addr->virt) {
894 if (addr->phys)
895 dma_free_coherent(dev, addr->len, addr->virt,
896 addr->phys);
897 else
898 kfree(addr->virt);
899 addr->virt = NULL;
900 }
901};
902
903/**
904 * i2o_dma_realloc - Realloc DMA memory
905 * @dev: struct device pointer to the PCI device of the I2O controller
906 * @addr: pointer to a i2o_dma struct DMA buffer
907 * @len: new length of memory
908 * @gfp_mask: GFP mask
909 *
910 * If there was something allocated in the addr, free it first. If len > 0
911 * than try to allocate it and write the addresses back to the addr
912 * structure. If len == 0 set the virtual address to NULL.
913 *
914 * Returns the 0 on success or negative error code on failure.
915 */
916static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
917 size_t len, gfp_t gfp_mask)
918{
919 i2o_dma_free(dev, addr);
920
921 if (len)
922 return i2o_dma_alloc(dev, addr, len, gfp_mask);
923
924 return 0;
925};
926
927/*
928 * i2o_pool_alloc - Allocate an slab cache and mempool
929 * @mempool: pointer to struct i2o_pool to write data into.
930 * @name: name which is used to identify cache
931 * @size: size of each object
932 * @min_nr: minimum number of objects
933 *
934 * First allocates a slab cache with name and size. Then allocates a
935 * mempool which uses the slab cache for allocation and freeing.
936 *
937 * Returns 0 on success or negative error code on failure.
938 */
939static inline int i2o_pool_alloc(struct i2o_pool *pool, const char *name,
940 size_t size, int min_nr)
941{
942 pool->name = kmalloc(strlen(name) + 1, GFP_KERNEL);
943 if (!pool->name)
944 goto exit;
945 strcpy(pool->name, name);
946
947 pool->slab =
948 kmem_cache_create(pool->name, size, 0, SLAB_HWCACHE_ALIGN, NULL,
949 NULL);
950 if (!pool->slab)
951 goto free_name;
952
Matthew Dobson93d23412006-03-26 01:37:50 -0800953 pool->mempool = mempool_create_slab_pool(min_nr, pool->slab);
Markus Lidela1a5ea72006-01-06 00:19:29 -0800954 if (!pool->mempool)
955 goto free_slab;
956
957 return 0;
958
959 free_slab:
960 kmem_cache_destroy(pool->slab);
961
962 free_name:
963 kfree(pool->name);
964
965 exit:
966 return -ENOMEM;
967};
968
969/*
970 * i2o_pool_free - Free slab cache and mempool again
971 * @mempool: pointer to struct i2o_pool which should be freed
972 *
973 * Note that you have to return all objects to the mempool again before
974 * calling i2o_pool_free().
975 */
976static inline void i2o_pool_free(struct i2o_pool *pool)
977{
978 mempool_destroy(pool->mempool);
979 kmem_cache_destroy(pool->slab);
980 kfree(pool->name);
981};
982
983/* I2O driver (OSM) functions */
984extern int i2o_driver_register(struct i2o_driver *);
985extern void i2o_driver_unregister(struct i2o_driver *);
986
987/**
988 * i2o_driver_notify_controller_add - Send notification of added controller
Randy Dunlapd9489fb2006-12-06 20:38:43 -0800989 * @drv: I2O driver
990 * @c: I2O controller
Markus Lidela1a5ea72006-01-06 00:19:29 -0800991 *
992 * Send notification of added controller to a single registered driver.
993 */
994static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
995 struct i2o_controller *c)
996{
997 if (drv->notify_controller_add)
998 drv->notify_controller_add(c);
999};
1000
1001/**
Randy Dunlapd9489fb2006-12-06 20:38:43 -08001002 * i2o_driver_notify_controller_remove - Send notification of removed controller
1003 * @drv: I2O driver
1004 * @c: I2O controller
Markus Lidela1a5ea72006-01-06 00:19:29 -08001005 *
1006 * Send notification of removed controller to a single registered driver.
1007 */
1008static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
1009 struct i2o_controller *c)
1010{
1011 if (drv->notify_controller_remove)
1012 drv->notify_controller_remove(c);
1013};
1014
1015/**
Randy Dunlapd9489fb2006-12-06 20:38:43 -08001016 * i2o_driver_notify_device_add - Send notification of added device
1017 * @drv: I2O driver
1018 * @i2o_dev: the added i2o_device
Markus Lidela1a5ea72006-01-06 00:19:29 -08001019 *
1020 * Send notification of added device to a single registered driver.
1021 */
1022static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
1023 struct i2o_device *i2o_dev)
1024{
1025 if (drv->notify_device_add)
1026 drv->notify_device_add(i2o_dev);
1027};
1028
1029/**
1030 * i2o_driver_notify_device_remove - Send notification of removed device
Randy Dunlapd9489fb2006-12-06 20:38:43 -08001031 * @drv: I2O driver
1032 * @i2o_dev: the added i2o_device
Markus Lidela1a5ea72006-01-06 00:19:29 -08001033 *
1034 * Send notification of removed device to a single registered driver.
1035 */
1036static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv,
1037 struct i2o_device *i2o_dev)
1038{
1039 if (drv->notify_device_remove)
1040 drv->notify_device_remove(i2o_dev);
1041};
1042
1043extern void i2o_driver_notify_controller_add_all(struct i2o_controller *);
1044extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *);
1045extern void i2o_driver_notify_device_add_all(struct i2o_device *);
1046extern void i2o_driver_notify_device_remove_all(struct i2o_device *);
1047
1048/* I2O device functions */
1049extern int i2o_device_claim(struct i2o_device *);
1050extern int i2o_device_claim_release(struct i2o_device *);
1051
1052/* Exec OSM functions */
1053extern int i2o_exec_lct_get(struct i2o_controller *);
1054
1055/* device / driver / kobject conversion functions */
1056#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
1057#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
1058#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
1059#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj))
1060
1061/**
1062 * i2o_out_to_virt - Turn an I2O message to a virtual address
1063 * @c: controller
1064 * @m: message engine value
1065 *
1066 * Turn a receive message from an I2O controller bus address into
1067 * a Linux virtual address. The shared page frame is a linear block
1068 * so we simply have to shift the offset. This function does not
1069 * work for sender side messages as they are ioremap objects
1070 * provided by the I2O controller.
1071 */
1072static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
1073 u32 m)
1074{
1075 BUG_ON(m < c->out_queue.phys
1076 || m >= c->out_queue.phys + c->out_queue.len);
1077
1078 return c->out_queue.virt + (m - c->out_queue.phys);
1079};
1080
1081/**
1082 * i2o_msg_in_to_virt - Turn an I2O message to a virtual address
1083 * @c: controller
1084 * @m: message engine value
1085 *
1086 * Turn a send message from an I2O controller bus address into
1087 * a Linux virtual address. The shared page frame is a linear block
1088 * so we simply have to shift the offset. This function does not
1089 * work for receive side messages as they are kmalloc objects
1090 * in a different pool.
1091 */
1092static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
1093 i2o_controller *c,
1094 u32 m)
1095{
1096 return c->in_queue.virt + m;
1097};
1098
1099/**
1100 * i2o_msg_get - obtain an I2O message from the IOP
1101 * @c: I2O controller
1102 *
1103 * This function tries to get a message frame. If no message frame is
1104 * available do not wait until one is availabe (see also i2o_msg_get_wait).
1105 * The returned pointer to the message frame is not in I/O memory, it is
1106 * allocated from a mempool. But because a MFA is allocated from the
1107 * controller too it is guaranteed that i2o_msg_post() will never fail.
1108 *
1109 * On a success a pointer to the message frame is returned. If the message
1110 * queue is empty -EBUSY is returned and if no memory is available -ENOMEM
1111 * is returned.
1112 */
1113static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
1114{
1115 struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC);
1116 if (!mmsg)
1117 return ERR_PTR(-ENOMEM);
1118
1119 mmsg->mfa = readl(c->in_port);
Markus Lidel8b3e09e2006-02-03 03:04:29 -08001120 if (unlikely(mmsg->mfa >= c->in_queue.len)) {
Markus Lidel57a62fe2006-06-10 09:54:14 -07001121 u32 mfa = mmsg->mfa;
1122
Markus Lidela1a5ea72006-01-06 00:19:29 -08001123 mempool_free(mmsg, c->in_msg.mempool);
Markus Lidel57a62fe2006-06-10 09:54:14 -07001124
1125 if (mfa == I2O_QUEUE_EMPTY)
Markus Lidel8b3e09e2006-02-03 03:04:29 -08001126 return ERR_PTR(-EBUSY);
1127 return ERR_PTR(-EFAULT);
Markus Lidela1a5ea72006-01-06 00:19:29 -08001128 }
1129
1130 return &mmsg->msg;
1131};
1132
1133/**
1134 * i2o_msg_post - Post I2O message to I2O controller
1135 * @c: I2O controller to which the message should be send
1136 * @msg: message returned by i2o_msg_get()
1137 *
1138 * Post the message to the I2O controller and return immediately.
1139 */
1140static inline void i2o_msg_post(struct i2o_controller *c,
1141 struct i2o_message *msg)
1142{
1143 struct i2o_msg_mfa *mmsg;
1144
1145 mmsg = container_of(msg, struct i2o_msg_mfa, msg);
1146 memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg,
1147 (le32_to_cpu(msg->u.head[0]) >> 16) << 2);
1148 writel(mmsg->mfa, c->in_port);
1149 mempool_free(mmsg, c->in_msg.mempool);
1150};
1151
1152/**
1153 * i2o_msg_post_wait - Post and wait a message and wait until return
1154 * @c: controller
Randy Dunlapd9489fb2006-12-06 20:38:43 -08001155 * @msg: message to post
Markus Lidela1a5ea72006-01-06 00:19:29 -08001156 * @timeout: time in seconds to wait
1157 *
1158 * This API allows an OSM to post a message and then be told whether or
1159 * not the system received a successful reply. If the message times out
1160 * then the value '-ETIMEDOUT' is returned.
1161 *
1162 * Returns 0 on success or negative error code on failure.
1163 */
1164static inline int i2o_msg_post_wait(struct i2o_controller *c,
1165 struct i2o_message *msg,
1166 unsigned long timeout)
1167{
1168 return i2o_msg_post_wait_mem(c, msg, timeout, NULL);
1169};
1170
1171/**
1172 * i2o_msg_nop_mfa - Returns a fetched MFA back to the controller
1173 * @c: I2O controller from which the MFA was fetched
1174 * @mfa: MFA which should be returned
1175 *
1176 * This function must be used for preserved messages, because i2o_msg_nop()
1177 * also returns the allocated memory back to the msg_pool mempool.
1178 */
1179static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa)
1180{
1181 struct i2o_message __iomem *msg;
1182 u32 nop[3] = {
1183 THREE_WORD_MSG_SIZE | SGL_OFFSET_0,
1184 I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
1185 0x00000000
1186 };
1187
1188 msg = i2o_msg_in_to_virt(c, mfa);
1189 memcpy_toio(msg, nop, sizeof(nop));
1190 writel(mfa, c->in_port);
1191};
1192
1193/**
1194 * i2o_msg_nop - Returns a message which is not used
1195 * @c: I2O controller from which the message was created
1196 * @msg: message which should be returned
1197 *
1198 * If you fetch a message via i2o_msg_get, and can't use it, you must
1199 * return the message with this function. Otherwise the MFA is lost as well
1200 * as the allocated memory from the mempool.
1201 */
1202static inline void i2o_msg_nop(struct i2o_controller *c,
1203 struct i2o_message *msg)
1204{
1205 struct i2o_msg_mfa *mmsg;
1206 mmsg = container_of(msg, struct i2o_msg_mfa, msg);
1207
1208 i2o_msg_nop_mfa(c, mmsg->mfa);
1209 mempool_free(mmsg, c->in_msg.mempool);
1210};
1211
1212/**
1213 * i2o_flush_reply - Flush reply from I2O controller
1214 * @c: I2O controller
1215 * @m: the message identifier
1216 *
1217 * The I2O controller must be informed that the reply message is not needed
1218 * anymore. If you forget to flush the reply, the message frame can't be
1219 * used by the controller anymore and is therefore lost.
1220 */
1221static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
1222{
1223 writel(m, c->out_port);
1224};
1225
1226/*
1227 * Endian handling wrapped into the macro - keeps the core code
1228 * cleaner.
1229 */
1230
1231#define i2o_raw_writel(val, mem) __raw_writel(cpu_to_le32(val), mem)
1232
1233extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int);
1234extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int,
1235 void *, int);
1236
1237/* debugging and troubleshooting/diagnostic helpers. */
1238#define osm_printk(level, format, arg...) \
1239 printk(level "%s: " format, OSM_NAME , ## arg)
1240
1241#ifdef DEBUG
1242#define osm_debug(format, arg...) \
1243 osm_printk(KERN_DEBUG, format , ## arg)
1244#else
1245#define osm_debug(format, arg...) \
1246 do { } while (0)
1247#endif
1248
1249#define osm_err(format, arg...) \
1250 osm_printk(KERN_ERR, format , ## arg)
1251#define osm_info(format, arg...) \
1252 osm_printk(KERN_INFO, format , ## arg)
1253#define osm_warn(format, arg...) \
1254 osm_printk(KERN_WARNING, format , ## arg)
1255
1256/* debugging functions */
1257extern void i2o_report_status(const char *, const char *, struct i2o_message *);
1258extern void i2o_dump_message(struct i2o_message *);
1259extern void i2o_dump_hrt(struct i2o_controller *c);
1260extern void i2o_debug_state(struct i2o_controller *c);
1261
Linus Torvalds1da177e2005-04-16 15:20:36 -07001262#endif /* __KERNEL__ */
1263#endif /* _I2O_H */