blob: 3b71b42e89d505cf5120f87d173f7e78f05e6550 [file] [log] [blame]
Laurent Pinchart99b82ab2013-06-13 18:54:44 +02001/*
2 * R-Mobile TPU PWM driver
3 *
4 * Copyright (C) 2012 Renesas Solutions Corp.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16#include <linux/clk.h>
17#include <linux/err.h>
18#include <linux/io.h>
19#include <linux/init.h>
20#include <linux/ioport.h>
21#include <linux/module.h>
22#include <linux/mutex.h>
Laurent Pinchart382457e2013-07-26 00:27:41 +020023#include <linux/of.h>
Laurent Pinchart99b82ab2013-06-13 18:54:44 +020024#include <linux/platform_device.h>
25#include <linux/pm_runtime.h>
26#include <linux/pwm.h>
27#include <linux/slab.h>
28#include <linux/spinlock.h>
29
Alexandre Bellonidc671152014-05-19 22:42:34 +020030#define TPU_CHANNEL_MAX 4
31
Laurent Pinchart99b82ab2013-06-13 18:54:44 +020032#define TPU_TSTR 0x00 /* Timer start register (shared) */
33
34#define TPU_TCRn 0x00 /* Timer control register */
35#define TPU_TCR_CCLR_NONE (0 << 5)
36#define TPU_TCR_CCLR_TGRA (1 << 5)
37#define TPU_TCR_CCLR_TGRB (2 << 5)
38#define TPU_TCR_CCLR_TGRC (5 << 5)
39#define TPU_TCR_CCLR_TGRD (6 << 5)
40#define TPU_TCR_CKEG_RISING (0 << 3)
41#define TPU_TCR_CKEG_FALLING (1 << 3)
42#define TPU_TCR_CKEG_BOTH (2 << 3)
43#define TPU_TMDRn 0x04 /* Timer mode register */
44#define TPU_TMDR_BFWT (1 << 6)
45#define TPU_TMDR_BFB (1 << 5)
46#define TPU_TMDR_BFA (1 << 4)
47#define TPU_TMDR_MD_NORMAL (0 << 0)
48#define TPU_TMDR_MD_PWM (2 << 0)
49#define TPU_TIORn 0x08 /* Timer I/O control register */
50#define TPU_TIOR_IOA_0 (0 << 0)
51#define TPU_TIOR_IOA_0_CLR (1 << 0)
52#define TPU_TIOR_IOA_0_SET (2 << 0)
53#define TPU_TIOR_IOA_0_TOGGLE (3 << 0)
54#define TPU_TIOR_IOA_1 (4 << 0)
55#define TPU_TIOR_IOA_1_CLR (5 << 0)
56#define TPU_TIOR_IOA_1_SET (6 << 0)
57#define TPU_TIOR_IOA_1_TOGGLE (7 << 0)
58#define TPU_TIERn 0x0c /* Timer interrupt enable register */
59#define TPU_TSRn 0x10 /* Timer status register */
60#define TPU_TCNTn 0x14 /* Timer counter */
61#define TPU_TGRAn 0x18 /* Timer general register A */
62#define TPU_TGRBn 0x1c /* Timer general register B */
63#define TPU_TGRCn 0x20 /* Timer general register C */
64#define TPU_TGRDn 0x24 /* Timer general register D */
65
66#define TPU_CHANNEL_OFFSET 0x10
67#define TPU_CHANNEL_SIZE 0x40
68
69enum tpu_pin_state {
70 TPU_PIN_INACTIVE, /* Pin is driven inactive */
71 TPU_PIN_PWM, /* Pin is driven by PWM */
72 TPU_PIN_ACTIVE, /* Pin is driven active */
73};
74
75struct tpu_device;
76
77struct tpu_pwm_device {
78 bool timer_on; /* Whether the timer is running */
79
80 struct tpu_device *tpu;
81 unsigned int channel; /* Channel number in the TPU */
82
83 enum pwm_polarity polarity;
84 unsigned int prescaler;
85 u16 period;
86 u16 duty;
87};
88
89struct tpu_device {
90 struct platform_device *pdev;
Laurent Pinchart99b82ab2013-06-13 18:54:44 +020091 struct pwm_chip chip;
92 spinlock_t lock;
93
94 void __iomem *base;
95 struct clk *clk;
96};
97
98#define to_tpu_device(c) container_of(c, struct tpu_device, chip)
99
100static void tpu_pwm_write(struct tpu_pwm_device *pwm, int reg_nr, u16 value)
101{
102 void __iomem *base = pwm->tpu->base + TPU_CHANNEL_OFFSET
103 + pwm->channel * TPU_CHANNEL_SIZE;
104
105 iowrite16(value, base + reg_nr);
106}
107
108static void tpu_pwm_set_pin(struct tpu_pwm_device *pwm,
109 enum tpu_pin_state state)
110{
111 static const char * const states[] = { "inactive", "PWM", "active" };
112
113 dev_dbg(&pwm->tpu->pdev->dev, "%u: configuring pin as %s\n",
114 pwm->channel, states[state]);
115
116 switch (state) {
117 case TPU_PIN_INACTIVE:
118 tpu_pwm_write(pwm, TPU_TIORn,
119 pwm->polarity == PWM_POLARITY_INVERSED ?
120 TPU_TIOR_IOA_1 : TPU_TIOR_IOA_0);
121 break;
122 case TPU_PIN_PWM:
123 tpu_pwm_write(pwm, TPU_TIORn,
124 pwm->polarity == PWM_POLARITY_INVERSED ?
125 TPU_TIOR_IOA_0_SET : TPU_TIOR_IOA_1_CLR);
126 break;
127 case TPU_PIN_ACTIVE:
128 tpu_pwm_write(pwm, TPU_TIORn,
129 pwm->polarity == PWM_POLARITY_INVERSED ?
130 TPU_TIOR_IOA_0 : TPU_TIOR_IOA_1);
131 break;
132 }
133}
134
135static void tpu_pwm_start_stop(struct tpu_pwm_device *pwm, int start)
136{
137 unsigned long flags;
138 u16 value;
139
140 spin_lock_irqsave(&pwm->tpu->lock, flags);
141 value = ioread16(pwm->tpu->base + TPU_TSTR);
142
143 if (start)
144 value |= 1 << pwm->channel;
145 else
146 value &= ~(1 << pwm->channel);
147
148 iowrite16(value, pwm->tpu->base + TPU_TSTR);
149 spin_unlock_irqrestore(&pwm->tpu->lock, flags);
150}
151
152static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm)
153{
154 int ret;
155
156 if (!pwm->timer_on) {
157 /* Wake up device and enable clock. */
158 pm_runtime_get_sync(&pwm->tpu->pdev->dev);
159 ret = clk_prepare_enable(pwm->tpu->clk);
160 if (ret) {
161 dev_err(&pwm->tpu->pdev->dev, "cannot enable clock\n");
162 return ret;
163 }
164 pwm->timer_on = true;
165 }
166
167 /*
168 * Make sure the channel is stopped, as we need to reconfigure it
169 * completely. First drive the pin to the inactive state to avoid
170 * glitches.
171 */
172 tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE);
173 tpu_pwm_start_stop(pwm, false);
174
175 /*
176 * - Clear TCNT on TGRB match
177 * - Count on rising edge
178 * - Set prescaler
179 * - Output 0 until TGRA, output 1 until TGRB (active low polarity)
180 * - Output 1 until TGRA, output 0 until TGRB (active high polarity
181 * - PWM mode
182 */
183 tpu_pwm_write(pwm, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING |
184 pwm->prescaler);
185 tpu_pwm_write(pwm, TPU_TMDRn, TPU_TMDR_MD_PWM);
186 tpu_pwm_set_pin(pwm, TPU_PIN_PWM);
187 tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty);
188 tpu_pwm_write(pwm, TPU_TGRBn, pwm->period);
189
190 dev_dbg(&pwm->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n",
191 pwm->channel, pwm->duty, pwm->period);
192
193 /* Start the channel. */
194 tpu_pwm_start_stop(pwm, true);
195
196 return 0;
197}
198
199static void tpu_pwm_timer_stop(struct tpu_pwm_device *pwm)
200{
201 if (!pwm->timer_on)
202 return;
203
204 /* Disable channel. */
205 tpu_pwm_start_stop(pwm, false);
206
207 /* Stop clock and mark device as idle. */
208 clk_disable_unprepare(pwm->tpu->clk);
209 pm_runtime_put(&pwm->tpu->pdev->dev);
210
211 pwm->timer_on = false;
212}
213
214/* -----------------------------------------------------------------------------
215 * PWM API
216 */
217
218static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm)
219{
220 struct tpu_device *tpu = to_tpu_device(chip);
221 struct tpu_pwm_device *pwm;
222
223 if (_pwm->hwpwm >= TPU_CHANNEL_MAX)
224 return -EINVAL;
225
226 pwm = kzalloc(sizeof(*pwm), GFP_KERNEL);
227 if (pwm == NULL)
228 return -ENOMEM;
229
230 pwm->tpu = tpu;
231 pwm->channel = _pwm->hwpwm;
Alexandre Bellonidc671152014-05-19 22:42:34 +0200232 pwm->polarity = PWM_POLARITY_NORMAL;
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200233 pwm->prescaler = 0;
234 pwm->period = 0;
235 pwm->duty = 0;
236
237 pwm->timer_on = false;
238
239 pwm_set_chip_data(_pwm, pwm);
240
241 return 0;
242}
243
244static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *_pwm)
245{
246 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
247
248 tpu_pwm_timer_stop(pwm);
249 kfree(pwm);
250}
251
252static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm,
253 int duty_ns, int period_ns)
254{
255 static const unsigned int prescalers[] = { 1, 4, 16, 64 };
256 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
257 struct tpu_device *tpu = to_tpu_device(chip);
258 unsigned int prescaler;
259 bool duty_only = false;
260 u32 clk_rate;
261 u32 period;
262 u32 duty;
263 int ret;
264
265 /*
266 * Pick a prescaler to avoid overflowing the counter.
267 * TODO: Pick the highest acceptable prescaler.
268 */
269 clk_rate = clk_get_rate(tpu->clk);
270
271 for (prescaler = 0; prescaler < ARRAY_SIZE(prescalers); ++prescaler) {
272 period = clk_rate / prescalers[prescaler]
273 / (NSEC_PER_SEC / period_ns);
274 if (period <= 0xffff)
275 break;
276 }
277
278 if (prescaler == ARRAY_SIZE(prescalers) || period == 0) {
279 dev_err(&tpu->pdev->dev, "clock rate mismatch\n");
280 return -ENOTSUPP;
281 }
282
283 if (duty_ns) {
284 duty = clk_rate / prescalers[prescaler]
285 / (NSEC_PER_SEC / duty_ns);
286 if (duty > period)
287 return -EINVAL;
288 } else {
289 duty = 0;
290 }
291
292 dev_dbg(&tpu->pdev->dev,
293 "rate %u, prescaler %u, period %u, duty %u\n",
294 clk_rate, prescalers[prescaler], period, duty);
295
296 if (pwm->prescaler == prescaler && pwm->period == period)
297 duty_only = true;
298
299 pwm->prescaler = prescaler;
300 pwm->period = period;
301 pwm->duty = duty;
302
303 /* If the channel is disabled we're done. */
304 if (!test_bit(PWMF_ENABLED, &_pwm->flags))
305 return 0;
306
307 if (duty_only && pwm->timer_on) {
308 /*
309 * If only the duty cycle changed and the timer is already
310 * running, there's no need to reconfigure it completely, Just
311 * modify the duty cycle.
312 */
313 tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty);
314 dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", pwm->channel,
315 pwm->duty);
316 } else {
317 /* Otherwise perform a full reconfiguration. */
318 ret = tpu_pwm_timer_start(pwm);
319 if (ret < 0)
320 return ret;
321 }
322
323 if (duty == 0 || duty == period) {
324 /*
325 * To avoid running the timer when not strictly required, handle
326 * 0% and 100% duty cycles as fixed levels and stop the timer.
327 */
328 tpu_pwm_set_pin(pwm, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE);
329 tpu_pwm_timer_stop(pwm);
330 }
331
332 return 0;
333}
334
335static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *_pwm,
336 enum pwm_polarity polarity)
337{
338 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
339
340 pwm->polarity = polarity;
341
342 return 0;
343}
344
345static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *_pwm)
346{
347 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
348 int ret;
349
350 ret = tpu_pwm_timer_start(pwm);
351 if (ret < 0)
352 return ret;
353
354 /*
355 * To avoid running the timer when not strictly required, handle 0% and
356 * 100% duty cycles as fixed levels and stop the timer.
357 */
358 if (pwm->duty == 0 || pwm->duty == pwm->period) {
359 tpu_pwm_set_pin(pwm, pwm->duty ?
360 TPU_PIN_ACTIVE : TPU_PIN_INACTIVE);
361 tpu_pwm_timer_stop(pwm);
362 }
363
364 return 0;
365}
366
367static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *_pwm)
368{
369 struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm);
370
371 /* The timer must be running to modify the pin output configuration. */
372 tpu_pwm_timer_start(pwm);
373 tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE);
374 tpu_pwm_timer_stop(pwm);
375}
376
377static const struct pwm_ops tpu_pwm_ops = {
378 .request = tpu_pwm_request,
379 .free = tpu_pwm_free,
380 .config = tpu_pwm_config,
381 .set_polarity = tpu_pwm_set_polarity,
382 .enable = tpu_pwm_enable,
383 .disable = tpu_pwm_disable,
384 .owner = THIS_MODULE,
385};
386
387/* -----------------------------------------------------------------------------
388 * Probe and remove
389 */
390
391static int tpu_probe(struct platform_device *pdev)
392{
393 struct tpu_device *tpu;
394 struct resource *res;
395 int ret;
396
397 tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL);
Jingoo Han6c5059c2014-04-23 18:40:29 +0900398 if (tpu == NULL)
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200399 return -ENOMEM;
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200400
Laurent Pinchart382457e2013-07-26 00:27:41 +0200401 spin_lock_init(&tpu->lock);
402 tpu->pdev = pdev;
403
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200404 /* Map memory, get clock and pin control. */
405 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200406 tpu->base = devm_ioremap_resource(&pdev->dev, res);
Wei Yongjun00cf99e2013-06-25 10:09:57 +0800407 if (IS_ERR(tpu->base))
408 return PTR_ERR(tpu->base);
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200409
410 tpu->clk = devm_clk_get(&pdev->dev, NULL);
411 if (IS_ERR(tpu->clk)) {
412 dev_err(&pdev->dev, "cannot get clock\n");
413 return PTR_ERR(tpu->clk);
414 }
415
416 /* Initialize and register the device. */
417 platform_set_drvdata(pdev, tpu);
418
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200419 tpu->chip.dev = &pdev->dev;
420 tpu->chip.ops = &tpu_pwm_ops;
Laurent Pinchart382457e2013-07-26 00:27:41 +0200421 tpu->chip.of_xlate = of_pwm_xlate_with_flags;
422 tpu->chip.of_pwm_n_cells = 3;
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200423 tpu->chip.base = -1;
424 tpu->chip.npwm = TPU_CHANNEL_MAX;
425
426 ret = pwmchip_add(&tpu->chip);
427 if (ret < 0) {
428 dev_err(&pdev->dev, "failed to register PWM chip\n");
429 return ret;
430 }
431
432 dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id);
433
434 pm_runtime_enable(&pdev->dev);
435
436 return 0;
437}
438
439static int tpu_remove(struct platform_device *pdev)
440{
441 struct tpu_device *tpu = platform_get_drvdata(pdev);
442 int ret;
443
444 ret = pwmchip_remove(&tpu->chip);
445 if (ret)
446 return ret;
447
448 pm_runtime_disable(&pdev->dev);
449
450 return 0;
451}
452
Laurent Pinchart382457e2013-07-26 00:27:41 +0200453#ifdef CONFIG_OF
454static const struct of_device_id tpu_of_table[] = {
455 { .compatible = "renesas,tpu-r8a73a4", },
456 { .compatible = "renesas,tpu-r8a7740", },
457 { .compatible = "renesas,tpu-r8a7790", },
458 { .compatible = "renesas,tpu-sh7372", },
459 { .compatible = "renesas,tpu", },
460 { },
461};
462
463MODULE_DEVICE_TABLE(of, tpu_of_table);
464#endif
465
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200466static struct platform_driver tpu_driver = {
467 .probe = tpu_probe,
468 .remove = tpu_remove,
469 .driver = {
470 .name = "renesas-tpu-pwm",
471 .owner = THIS_MODULE,
Laurent Pinchart382457e2013-07-26 00:27:41 +0200472 .of_match_table = of_match_ptr(tpu_of_table),
Laurent Pinchart99b82ab2013-06-13 18:54:44 +0200473 }
474};
475
476module_platform_driver(tpu_driver);
477
478MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
479MODULE_DESCRIPTION("Renesas TPU PWM Driver");
480MODULE_LICENSE("GPL v2");
Axel Lin71077bc2013-06-26 00:25:02 +0800481MODULE_ALIAS("platform:renesas-tpu-pwm");