blob: b923bc2307ad2e09758086daba616863bb2e1a00 [file] [log] [blame]
Rudolf Marek29fa06c2006-08-28 14:40:17 +02001/*
2 * k8temp.c - Linux kernel module for hardware monitoring
3 *
Jean Delvare7188cc62006-12-12 18:18:30 +01004 * Copyright (C) 2006 Rudolf Marek <r.marek@assembler.cz>
Rudolf Marek29fa06c2006-08-28 14:40:17 +02005 *
6 * Inspired from the w83785 and amd756 drivers.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
21 * 02110-1301 USA.
22 */
23
24#include <linux/module.h>
25#include <linux/delay.h>
26#include <linux/init.h>
27#include <linux/slab.h>
28#include <linux/jiffies.h>
29#include <linux/pci.h>
30#include <linux/hwmon.h>
31#include <linux/hwmon-sysfs.h>
32#include <linux/err.h>
33#include <linux/mutex.h>
Andreas Herrmannbb9a35f2009-01-15 22:27:46 +010034#include <asm/processor.h>
Rudolf Marek29fa06c2006-08-28 14:40:17 +020035
36#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
37#define REG_TEMP 0xe4
38#define SEL_PLACE 0x40
39#define SEL_CORE 0x04
40
41struct k8temp_data {
Tony Jones1beeffe2007-08-20 13:46:20 -070042 struct device *hwmon_dev;
Rudolf Marek29fa06c2006-08-28 14:40:17 +020043 struct mutex update_lock;
44 const char *name;
45 char valid; /* zero until following fields are valid */
46 unsigned long last_updated; /* in jiffies */
47
48 /* registers values */
49 u8 sensorsp; /* sensor presence bits - SEL_CORE & SEL_PLACE */
50 u32 temp[2][2]; /* core, place */
Andreas Herrmanna2e066b2009-01-15 22:27:47 +010051 u8 swap_core_select; /* meaning of SEL_CORE is inverted */
Andreas Herrmann76ff08d2009-01-15 22:27:47 +010052 u32 temp_offset;
Rudolf Marek29fa06c2006-08-28 14:40:17 +020053};
54
55static struct k8temp_data *k8temp_update_device(struct device *dev)
56{
57 struct k8temp_data *data = dev_get_drvdata(dev);
58 struct pci_dev *pdev = to_pci_dev(dev);
59 u8 tmp;
60
61 mutex_lock(&data->update_lock);
62
63 if (!data->valid
64 || time_after(jiffies, data->last_updated + HZ)) {
65 pci_read_config_byte(pdev, REG_TEMP, &tmp);
66 tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
67 pci_write_config_byte(pdev, REG_TEMP, tmp);
68 pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]);
69
70 if (data->sensorsp & SEL_PLACE) {
71 tmp |= SEL_PLACE; /* Select sensor 1, core0 */
72 pci_write_config_byte(pdev, REG_TEMP, tmp);
73 pci_read_config_dword(pdev, REG_TEMP,
74 &data->temp[0][1]);
75 }
76
77 if (data->sensorsp & SEL_CORE) {
78 tmp &= ~SEL_PLACE; /* Select sensor 0, core1 */
79 tmp |= SEL_CORE;
80 pci_write_config_byte(pdev, REG_TEMP, tmp);
81 pci_read_config_dword(pdev, REG_TEMP,
82 &data->temp[1][0]);
83
84 if (data->sensorsp & SEL_PLACE) {
85 tmp |= SEL_PLACE; /* Select sensor 1, core1 */
86 pci_write_config_byte(pdev, REG_TEMP, tmp);
87 pci_read_config_dword(pdev, REG_TEMP,
88 &data->temp[1][1]);
89 }
90 }
91
92 data->last_updated = jiffies;
93 data->valid = 1;
94 }
95
96 mutex_unlock(&data->update_lock);
97 return data;
98}
99
100/*
101 * Sysfs stuff
102 */
103
104static ssize_t show_name(struct device *dev, struct device_attribute
105 *devattr, char *buf)
106{
107 struct k8temp_data *data = dev_get_drvdata(dev);
108
109 return sprintf(buf, "%s\n", data->name);
110}
111
112
113static ssize_t show_temp(struct device *dev,
114 struct device_attribute *devattr, char *buf)
115{
116 struct sensor_device_attribute_2 *attr =
117 to_sensor_dev_attr_2(devattr);
118 int core = attr->nr;
119 int place = attr->index;
Andreas Herrmann76ff08d2009-01-15 22:27:47 +0100120 int temp;
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200121 struct k8temp_data *data = k8temp_update_device(dev);
122
Jean Delvarecd4de212010-06-20 09:22:32 +0200123 if (data->swap_core_select && (data->sensorsp & SEL_CORE))
Andreas Herrmanna2e066b2009-01-15 22:27:47 +0100124 core = core ? 0 : 1;
125
Andreas Herrmann76ff08d2009-01-15 22:27:47 +0100126 temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
127
128 return sprintf(buf, "%d\n", temp);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200129}
130
131/* core, place */
132
133static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
134static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
135static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0);
136static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1);
137static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
138
Márton Németh3dd3a152010-01-10 20:52:35 +0100139static const struct pci_device_id k8temp_ids[] = {
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200140 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
141 { 0 },
142};
143
Jean Delvareb17ebc92006-08-28 14:41:03 +0200144MODULE_DEVICE_TABLE(pci, k8temp_ids);
145
Andreas Herrmanna05e93f2010-08-25 15:42:12 +0200146static int __devinit is_rev_g_desktop(u8 model)
147{
148 u32 brandidx;
149
150 if (model < 0x69)
151 return 0;
152
153 if (model == 0xc1 || model == 0x6c || model == 0x7c)
154 return 0;
155
156 /*
157 * Differentiate between AM2 and ASB1.
158 * See "Constructing the processor Name String" in "Revision
159 * Guide for AMD NPT Family 0Fh Processors" (33610).
160 */
161 brandidx = cpuid_ebx(0x80000001);
162 brandidx = (brandidx >> 9) & 0x1f;
163
164 /* Single core */
165 if ((model == 0x6f || model == 0x7f) &&
166 (brandidx == 0x7 || brandidx == 0x9 || brandidx == 0xc))
167 return 0;
168
169 /* Dual core */
170 if (model == 0x6b &&
171 (brandidx == 0xb || brandidx == 0xc))
172 return 0;
173
174 return 1;
175}
176
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200177static int __devinit k8temp_probe(struct pci_dev *pdev,
178 const struct pci_device_id *id)
179{
180 int err;
181 u8 scfg;
182 u32 temp;
Andreas Herrmannbb9a35f2009-01-15 22:27:46 +0100183 u8 model, stepping;
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200184 struct k8temp_data *data;
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200185
186 if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
187 err = -ENOMEM;
188 goto exit;
189 }
190
Andreas Herrmannbb9a35f2009-01-15 22:27:46 +0100191 model = boot_cpu_data.x86_model;
192 stepping = boot_cpu_data.x86_mask;
193
Andreas Herrmann628b4502010-10-28 20:31:42 +0200194 /* feature available since SH-C0, exclude older revisions */
195 if (((model == 4) && (stepping == 0)) ||
196 ((model == 5) && (stepping <= 1))) {
197 err = -ENODEV;
198 goto exit_free;
Andreas Herrmannbb9a35f2009-01-15 22:27:46 +0100199 }
200
Andreas Herrmann628b4502010-10-28 20:31:42 +0200201 /*
202 * AMD NPT family 0fh, i.e. RevF and RevG:
203 * meaning of SEL_CORE bit is inverted
204 */
205 if (model >= 0x40) {
206 data->swap_core_select = 1;
207 dev_warn(&pdev->dev, "Temperature readouts might be wrong - "
208 "check erratum #141\n");
209 }
210
211 /*
212 * RevG desktop CPUs (i.e. no socket S1G1 or ASB1 parts) need
213 * additional offset, otherwise reported temperature is below
214 * ambient temperature
215 */
216 if (is_rev_g_desktop(model))
217 data->temp_offset = 21000;
218
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200219 pci_read_config_byte(pdev, REG_TEMP, &scfg);
220 scfg &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
221 pci_write_config_byte(pdev, REG_TEMP, scfg);
222 pci_read_config_byte(pdev, REG_TEMP, &scfg);
223
224 if (scfg & (SEL_PLACE | SEL_CORE)) {
225 dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n");
226 err = -ENODEV;
227 goto exit_free;
228 }
229
230 scfg |= (SEL_PLACE | SEL_CORE);
231 pci_write_config_byte(pdev, REG_TEMP, scfg);
232
233 /* now we know if we can change core and/or sensor */
234 pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp);
235
236 if (data->sensorsp & SEL_PLACE) {
237 scfg &= ~SEL_CORE; /* Select sensor 1, core0 */
238 pci_write_config_byte(pdev, REG_TEMP, scfg);
239 pci_read_config_dword(pdev, REG_TEMP, &temp);
240 scfg |= SEL_CORE; /* prepare for next selection */
241 if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */
242 data->sensorsp &= ~SEL_PLACE;
243 }
244
245 if (data->sensorsp & SEL_CORE) {
246 scfg &= ~SEL_PLACE; /* Select sensor 0, core1 */
247 pci_write_config_byte(pdev, REG_TEMP, scfg);
248 pci_read_config_dword(pdev, REG_TEMP, &temp);
249 if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */
250 data->sensorsp &= ~SEL_CORE;
251 }
252
253 data->name = "k8temp";
254 mutex_init(&data->update_lock);
Jean Delvare95de3b22011-05-25 20:43:31 +0200255 pci_set_drvdata(pdev, data);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200256
257 /* Register sysfs hooks */
258 err = device_create_file(&pdev->dev,
259 &sensor_dev_attr_temp1_input.dev_attr);
260 if (err)
261 goto exit_remove;
262
263 /* sensor can be changed and reports something */
264 if (data->sensorsp & SEL_PLACE) {
265 err = device_create_file(&pdev->dev,
266 &sensor_dev_attr_temp2_input.dev_attr);
267 if (err)
268 goto exit_remove;
269 }
270
271 /* core can be changed and reports something */
272 if (data->sensorsp & SEL_CORE) {
273 err = device_create_file(&pdev->dev,
274 &sensor_dev_attr_temp3_input.dev_attr);
275 if (err)
276 goto exit_remove;
Julia Lawalldf149d02010-08-14 21:08:47 +0200277 if (data->sensorsp & SEL_PLACE) {
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200278 err = device_create_file(&pdev->dev,
279 &sensor_dev_attr_temp4_input.
280 dev_attr);
281 if (err)
282 goto exit_remove;
Julia Lawalldf149d02010-08-14 21:08:47 +0200283 }
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200284 }
285
286 err = device_create_file(&pdev->dev, &dev_attr_name);
287 if (err)
288 goto exit_remove;
289
Tony Jones1beeffe2007-08-20 13:46:20 -0700290 data->hwmon_dev = hwmon_device_register(&pdev->dev);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200291
Tony Jones1beeffe2007-08-20 13:46:20 -0700292 if (IS_ERR(data->hwmon_dev)) {
293 err = PTR_ERR(data->hwmon_dev);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200294 goto exit_remove;
295 }
296
297 return 0;
298
299exit_remove:
300 device_remove_file(&pdev->dev,
301 &sensor_dev_attr_temp1_input.dev_attr);
302 device_remove_file(&pdev->dev,
303 &sensor_dev_attr_temp2_input.dev_attr);
304 device_remove_file(&pdev->dev,
305 &sensor_dev_attr_temp3_input.dev_attr);
306 device_remove_file(&pdev->dev,
307 &sensor_dev_attr_temp4_input.dev_attr);
308 device_remove_file(&pdev->dev, &dev_attr_name);
309exit_free:
Jean Delvare95de3b22011-05-25 20:43:31 +0200310 pci_set_drvdata(pdev, NULL);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200311 kfree(data);
312exit:
313 return err;
314}
315
316static void __devexit k8temp_remove(struct pci_dev *pdev)
317{
Jean Delvare95de3b22011-05-25 20:43:31 +0200318 struct k8temp_data *data = pci_get_drvdata(pdev);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200319
Tony Jones1beeffe2007-08-20 13:46:20 -0700320 hwmon_device_unregister(data->hwmon_dev);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200321 device_remove_file(&pdev->dev,
322 &sensor_dev_attr_temp1_input.dev_attr);
323 device_remove_file(&pdev->dev,
324 &sensor_dev_attr_temp2_input.dev_attr);
325 device_remove_file(&pdev->dev,
326 &sensor_dev_attr_temp3_input.dev_attr);
327 device_remove_file(&pdev->dev,
328 &sensor_dev_attr_temp4_input.dev_attr);
329 device_remove_file(&pdev->dev, &dev_attr_name);
Jean Delvare95de3b22011-05-25 20:43:31 +0200330 pci_set_drvdata(pdev, NULL);
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200331 kfree(data);
332}
333
334static struct pci_driver k8temp_driver = {
335 .name = "k8temp",
336 .id_table = k8temp_ids,
337 .probe = k8temp_probe,
338 .remove = __devexit_p(k8temp_remove),
339};
340
341static int __init k8temp_init(void)
342{
343 return pci_register_driver(&k8temp_driver);
344}
345
346static void __exit k8temp_exit(void)
347{
348 pci_unregister_driver(&k8temp_driver);
349}
350
Jean Delvare7188cc62006-12-12 18:18:30 +0100351MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200352MODULE_DESCRIPTION("AMD K8 core temperature monitor");
353MODULE_LICENSE("GPL");
354
355module_init(k8temp_init)
356module_exit(k8temp_exit)