| Daniel Mack | abe4c51 | 2013-08-02 12:59:44 +0200 | [diff] [blame] | 1 | Maxim MAX8660 voltage regulator |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: must be one of "maxim,max8660", "maxim,max8661" |
| 5 | - reg: I2C slave address, usually 0x34 |
| 6 | - any required generic properties defined in regulator.txt |
| 7 | |
| 8 | Example: |
| 9 | |
| 10 | i2c_master { |
| 11 | max8660@34 { |
| 12 | compatible = "maxim,max8660"; |
| 13 | reg = <0x34>; |
| 14 | |
| 15 | regulators { |
| 16 | regulator@0 { |
| 17 | regulator-compatible= "V3(DCDC)"; |
| 18 | regulator-min-microvolt = <725000>; |
| 19 | regulator-max-microvolt = <1800000>; |
| 20 | }; |
| 21 | |
| 22 | regulator@1 { |
| 23 | regulator-compatible= "V4(DCDC)"; |
| 24 | regulator-min-microvolt = <725000>; |
| 25 | regulator-max-microvolt = <1800000>; |
| 26 | }; |
| 27 | |
| 28 | regulator@2 { |
| 29 | regulator-compatible= "V5(LDO)"; |
| 30 | regulator-min-microvolt = <1700000>; |
| 31 | regulator-max-microvolt = <2000000>; |
| 32 | }; |
| 33 | |
| 34 | regulator@3 { |
| 35 | regulator-compatible= "V6(LDO)"; |
| 36 | regulator-min-microvolt = <1800000>; |
| 37 | regulator-max-microvolt = <3300000>; |
| 38 | }; |
| 39 | |
| 40 | regulator@4 { |
| 41 | regulator-compatible= "V7(LDO)"; |
| 42 | regulator-min-microvolt = <1800000>; |
| 43 | regulator-max-microvolt = <3300000>; |
| 44 | }; |
| 45 | }; |
| 46 | }; |
| 47 | }; |