Nate Case | 317bf65 | 2009-06-11 14:42:59 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2008 Extreme Engineering Solutions, Inc. |
| 3 | * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. |
| 4 | * |
| 5 | * XPedite5301 PMC/XMC module based on MPC8572E |
| 6 | * |
| 7 | * This is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | /dts-v1/; |
| 13 | / { |
| 14 | model = "xes,xpedite5301"; |
| 15 | compatible = "xes,xpedite5301", "xes,MPC8572"; |
| 16 | #address-cells = <2>; |
| 17 | #size-cells = <2>; |
| 18 | form-factor = "PMC/XMC"; |
| 19 | boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ |
| 20 | |
| 21 | aliases { |
| 22 | ethernet0 = &enet0; |
| 23 | ethernet1 = &enet1; |
| 24 | serial0 = &serial0; |
| 25 | serial1 = &serial1; |
| 26 | pci1 = &pci1; |
| 27 | pci2 = &pci2; |
| 28 | }; |
| 29 | |
| 30 | cpus { |
| 31 | #address-cells = <1>; |
| 32 | #size-cells = <0>; |
| 33 | |
| 34 | PowerPC,8572@0 { |
| 35 | device_type = "cpu"; |
| 36 | reg = <0x0>; |
| 37 | d-cache-line-size = <32>; // 32 bytes |
| 38 | i-cache-line-size = <32>; // 32 bytes |
| 39 | d-cache-size = <0x8000>; // L1, 32K |
| 40 | i-cache-size = <0x8000>; // L1, 32K |
| 41 | timebase-frequency = <0>; |
| 42 | bus-frequency = <0>; |
| 43 | clock-frequency = <0>; |
| 44 | next-level-cache = <&L2>; |
| 45 | }; |
| 46 | |
| 47 | PowerPC,8572@1 { |
| 48 | device_type = "cpu"; |
| 49 | reg = <0x1>; |
| 50 | d-cache-line-size = <32>; // 32 bytes |
| 51 | i-cache-line-size = <32>; // 32 bytes |
| 52 | d-cache-size = <0x8000>; // L1, 32K |
| 53 | i-cache-size = <0x8000>; // L1, 32K |
| 54 | timebase-frequency = <0>; |
| 55 | bus-frequency = <0>; |
| 56 | clock-frequency = <0>; |
| 57 | next-level-cache = <&L2>; |
| 58 | }; |
| 59 | }; |
| 60 | |
| 61 | memory { |
| 62 | device_type = "memory"; |
| 63 | reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot |
| 64 | }; |
| 65 | |
| 66 | localbus@ef005000 { |
| 67 | #address-cells = <2>; |
| 68 | #size-cells = <1>; |
| 69 | compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; |
| 70 | reg = <0 0xef005000 0 0x1000>; |
| 71 | interrupts = <19 2>; |
| 72 | interrupt-parent = <&mpic>; |
| 73 | /* Local bus region mappings */ |
| 74 | ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ |
| 75 | 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ |
| 76 | 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ |
| 77 | 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ |
| 78 | |
| 79 | nor-boot@0,0 { |
| 80 | compatible = "amd,s29gl01gp", "cfi-flash"; |
| 81 | bank-width = <2>; |
| 82 | reg = <0 0 0x8000000>; /* 128MB */ |
| 83 | #address-cells = <1>; |
| 84 | #size-cells = <1>; |
| 85 | partition@0 { |
| 86 | label = "Primary user space"; |
| 87 | reg = <0x00000000 0x6f00000>; /* 111 MB */ |
| 88 | }; |
| 89 | partition@6f00000 { |
| 90 | label = "Primary kernel"; |
| 91 | reg = <0x6f00000 0x1000000>; /* 16 MB */ |
| 92 | }; |
| 93 | partition@7f00000 { |
| 94 | label = "Primary DTB"; |
| 95 | reg = <0x7f00000 0x40000>; /* 256 KB */ |
| 96 | }; |
| 97 | partition@7f40000 { |
| 98 | label = "Primary U-Boot environment"; |
| 99 | reg = <0x7f40000 0x40000>; /* 256 KB */ |
| 100 | }; |
| 101 | partition@7f80000 { |
| 102 | label = "Primary U-Boot"; |
| 103 | reg = <0x7f80000 0x80000>; /* 512 KB */ |
| 104 | read-only; |
| 105 | }; |
| 106 | }; |
| 107 | |
| 108 | nor-alternate@1,0 { |
| 109 | compatible = "amd,s29gl01gp", "cfi-flash"; |
| 110 | bank-width = <2>; |
| 111 | //reg = <0xf0000000 0x08000000>; /* 128MB */ |
| 112 | reg = <1 0 0x8000000>; /* 128MB */ |
| 113 | #address-cells = <1>; |
| 114 | #size-cells = <1>; |
| 115 | partition@0 { |
| 116 | label = "Secondary user space"; |
| 117 | reg = <0x00000000 0x6f00000>; /* 111 MB */ |
| 118 | }; |
| 119 | partition@6f00000 { |
| 120 | label = "Secondary kernel"; |
| 121 | reg = <0x6f00000 0x1000000>; /* 16 MB */ |
| 122 | }; |
| 123 | partition@7f00000 { |
| 124 | label = "Secondary DTB"; |
| 125 | reg = <0x7f00000 0x40000>; /* 256 KB */ |
| 126 | }; |
| 127 | partition@7f40000 { |
| 128 | label = "Secondary U-Boot environment"; |
| 129 | reg = <0x7f40000 0x40000>; /* 256 KB */ |
| 130 | }; |
| 131 | partition@7f80000 { |
| 132 | label = "Secondary U-Boot"; |
| 133 | reg = <0x7f80000 0x80000>; /* 512 KB */ |
| 134 | read-only; |
| 135 | }; |
| 136 | }; |
| 137 | |
| 138 | nand@2,0 { |
| 139 | #address-cells = <1>; |
| 140 | #size-cells = <1>; |
| 141 | /* |
| 142 | * Actual part could be ST Micro NAND08GW3B2A (1 GB), |
| 143 | * Micron MT29F8G08DAA (2x 512 MB), or Micron |
| 144 | * MT29F16G08FAA (2x 1 GB), depending on the build |
| 145 | * configuration |
| 146 | */ |
| 147 | compatible = "fsl,mpc8572-fcm-nand", |
| 148 | "fsl,elbc-fcm-nand"; |
| 149 | reg = <2 0 0x40000>; |
| 150 | /* U-Boot should fix this up if chip size > 1 GB */ |
| 151 | partition@0 { |
| 152 | label = "NAND Filesystem"; |
| 153 | reg = <0 0x40000000>; |
| 154 | }; |
| 155 | }; |
| 156 | |
| 157 | }; |
| 158 | |
| 159 | soc8572@ef000000 { |
| 160 | #address-cells = <1>; |
| 161 | #size-cells = <1>; |
| 162 | device_type = "soc"; |
| 163 | compatible = "fsl,mpc8572-immr", "simple-bus"; |
| 164 | ranges = <0x0 0 0xef000000 0x100000>; |
| 165 | bus-frequency = <0>; // Filled out by uboot. |
| 166 | |
| 167 | ecm-law@0 { |
| 168 | compatible = "fsl,ecm-law"; |
| 169 | reg = <0x0 0x1000>; |
| 170 | fsl,num-laws = <12>; |
| 171 | }; |
| 172 | |
| 173 | ecm@1000 { |
| 174 | compatible = "fsl,mpc8572-ecm", "fsl,ecm"; |
| 175 | reg = <0x1000 0x1000>; |
| 176 | interrupts = <17 2>; |
| 177 | interrupt-parent = <&mpic>; |
| 178 | }; |
| 179 | |
| 180 | memory-controller@2000 { |
| 181 | compatible = "fsl,mpc8572-memory-controller"; |
| 182 | reg = <0x2000 0x1000>; |
| 183 | interrupt-parent = <&mpic>; |
| 184 | interrupts = <18 2>; |
| 185 | }; |
| 186 | |
| 187 | memory-controller@6000 { |
| 188 | compatible = "fsl,mpc8572-memory-controller"; |
| 189 | reg = <0x6000 0x1000>; |
| 190 | interrupt-parent = <&mpic>; |
| 191 | interrupts = <18 2>; |
| 192 | }; |
| 193 | |
| 194 | L2: l2-cache-controller@20000 { |
| 195 | compatible = "fsl,mpc8572-l2-cache-controller"; |
| 196 | reg = <0x20000 0x1000>; |
| 197 | cache-line-size = <32>; // 32 bytes |
| 198 | cache-size = <0x100000>; // L2, 1M |
| 199 | interrupt-parent = <&mpic>; |
| 200 | interrupts = <16 2>; |
| 201 | }; |
| 202 | |
| 203 | i2c@3000 { |
| 204 | #address-cells = <1>; |
| 205 | #size-cells = <0>; |
| 206 | cell-index = <0>; |
| 207 | compatible = "fsl-i2c"; |
| 208 | reg = <0x3000 0x100>; |
| 209 | interrupts = <43 2>; |
| 210 | interrupt-parent = <&mpic>; |
| 211 | dfsrr; |
| 212 | |
| 213 | temp-sensor@48 { |
| 214 | compatible = "dallas,ds1631", "dallas,ds1621"; |
| 215 | reg = <0x48>; |
| 216 | }; |
| 217 | |
| 218 | temp-sensor@4c { |
| 219 | compatible = "adi,adt7461"; |
| 220 | reg = <0x4c>; |
| 221 | }; |
| 222 | |
| 223 | cpu-supervisor@51 { |
| 224 | compatible = "dallas,ds4510"; |
| 225 | reg = <0x51>; |
| 226 | }; |
| 227 | |
| 228 | eeprom@54 { |
| 229 | compatible = "atmel,at24c128b"; |
| 230 | reg = <0x54>; |
| 231 | }; |
| 232 | |
| 233 | rtc@68 { |
| 234 | compatible = "stm,m41t00", |
| 235 | "dallas,ds1338"; |
| 236 | reg = <0x68>; |
| 237 | }; |
| 238 | |
| 239 | pcie-switch@70 { |
| 240 | compatible = "plx,pex8518"; |
| 241 | reg = <0x70>; |
| 242 | }; |
| 243 | |
| 244 | gpio1: gpio@18 { |
| 245 | compatible = "nxp,pca9557"; |
| 246 | reg = <0x18>; |
| 247 | #gpio-cells = <2>; |
| 248 | gpio-controller; |
| 249 | polarity = <0x00>; |
| 250 | }; |
| 251 | |
| 252 | gpio2: gpio@1c { |
| 253 | compatible = "nxp,pca9557"; |
| 254 | reg = <0x1c>; |
| 255 | #gpio-cells = <2>; |
| 256 | gpio-controller; |
| 257 | polarity = <0x00>; |
| 258 | }; |
| 259 | |
| 260 | gpio3: gpio@1e { |
| 261 | compatible = "nxp,pca9557"; |
| 262 | reg = <0x1e>; |
| 263 | #gpio-cells = <2>; |
| 264 | gpio-controller; |
| 265 | polarity = <0x00>; |
| 266 | }; |
| 267 | |
| 268 | gpio4: gpio@1f { |
| 269 | compatible = "nxp,pca9557"; |
| 270 | reg = <0x1f>; |
| 271 | #gpio-cells = <2>; |
| 272 | gpio-controller; |
| 273 | polarity = <0x00>; |
| 274 | }; |
| 275 | }; |
| 276 | |
| 277 | i2c@3100 { |
| 278 | #address-cells = <1>; |
| 279 | #size-cells = <0>; |
| 280 | cell-index = <1>; |
| 281 | compatible = "fsl-i2c"; |
| 282 | reg = <0x3100 0x100>; |
| 283 | interrupts = <43 2>; |
| 284 | interrupt-parent = <&mpic>; |
| 285 | dfsrr; |
| 286 | }; |
| 287 | |
| 288 | dma@c300 { |
| 289 | #address-cells = <1>; |
| 290 | #size-cells = <1>; |
| 291 | compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; |
| 292 | reg = <0xc300 0x4>; |
| 293 | ranges = <0x0 0xc100 0x200>; |
| 294 | cell-index = <1>; |
| 295 | dma-channel@0 { |
| 296 | compatible = "fsl,mpc8572-dma-channel", |
| 297 | "fsl,eloplus-dma-channel"; |
| 298 | reg = <0x0 0x80>; |
| 299 | cell-index = <0>; |
| 300 | interrupt-parent = <&mpic>; |
| 301 | interrupts = <76 2>; |
| 302 | }; |
| 303 | dma-channel@80 { |
| 304 | compatible = "fsl,mpc8572-dma-channel", |
| 305 | "fsl,eloplus-dma-channel"; |
| 306 | reg = <0x80 0x80>; |
| 307 | cell-index = <1>; |
| 308 | interrupt-parent = <&mpic>; |
| 309 | interrupts = <77 2>; |
| 310 | }; |
| 311 | dma-channel@100 { |
| 312 | compatible = "fsl,mpc8572-dma-channel", |
| 313 | "fsl,eloplus-dma-channel"; |
| 314 | reg = <0x100 0x80>; |
| 315 | cell-index = <2>; |
| 316 | interrupt-parent = <&mpic>; |
| 317 | interrupts = <78 2>; |
| 318 | }; |
| 319 | dma-channel@180 { |
| 320 | compatible = "fsl,mpc8572-dma-channel", |
| 321 | "fsl,eloplus-dma-channel"; |
| 322 | reg = <0x180 0x80>; |
| 323 | cell-index = <3>; |
| 324 | interrupt-parent = <&mpic>; |
| 325 | interrupts = <79 2>; |
| 326 | }; |
| 327 | }; |
| 328 | |
| 329 | dma@21300 { |
| 330 | #address-cells = <1>; |
| 331 | #size-cells = <1>; |
| 332 | compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; |
| 333 | reg = <0x21300 0x4>; |
| 334 | ranges = <0x0 0x21100 0x200>; |
| 335 | cell-index = <0>; |
| 336 | dma-channel@0 { |
| 337 | compatible = "fsl,mpc8572-dma-channel", |
| 338 | "fsl,eloplus-dma-channel"; |
| 339 | reg = <0x0 0x80>; |
| 340 | cell-index = <0>; |
| 341 | interrupt-parent = <&mpic>; |
| 342 | interrupts = <20 2>; |
| 343 | }; |
| 344 | dma-channel@80 { |
| 345 | compatible = "fsl,mpc8572-dma-channel", |
| 346 | "fsl,eloplus-dma-channel"; |
| 347 | reg = <0x80 0x80>; |
| 348 | cell-index = <1>; |
| 349 | interrupt-parent = <&mpic>; |
| 350 | interrupts = <21 2>; |
| 351 | }; |
| 352 | dma-channel@100 { |
| 353 | compatible = "fsl,mpc8572-dma-channel", |
| 354 | "fsl,eloplus-dma-channel"; |
| 355 | reg = <0x100 0x80>; |
| 356 | cell-index = <2>; |
| 357 | interrupt-parent = <&mpic>; |
| 358 | interrupts = <22 2>; |
| 359 | }; |
| 360 | dma-channel@180 { |
| 361 | compatible = "fsl,mpc8572-dma-channel", |
| 362 | "fsl,eloplus-dma-channel"; |
| 363 | reg = <0x180 0x80>; |
| 364 | cell-index = <3>; |
| 365 | interrupt-parent = <&mpic>; |
| 366 | interrupts = <23 2>; |
| 367 | }; |
| 368 | }; |
| 369 | |
| 370 | /* eTSEC 1 */ |
| 371 | enet0: ethernet@24000 { |
| 372 | #address-cells = <1>; |
| 373 | #size-cells = <1>; |
| 374 | cell-index = <0>; |
| 375 | device_type = "network"; |
| 376 | model = "eTSEC"; |
| 377 | compatible = "gianfar"; |
| 378 | reg = <0x24000 0x1000>; |
| 379 | ranges = <0x0 0x24000 0x1000>; |
| 380 | local-mac-address = [ 00 00 00 00 00 00 ]; |
| 381 | interrupts = <29 2 30 2 34 2>; |
| 382 | interrupt-parent = <&mpic>; |
| 383 | tbi-handle = <&tbi0>; |
| 384 | phy-handle = <&phy0>; |
| 385 | phy-connection-type = "sgmii"; |
| 386 | |
| 387 | mdio@520 { |
| 388 | #address-cells = <1>; |
| 389 | #size-cells = <0>; |
| 390 | compatible = "fsl,gianfar-mdio"; |
| 391 | reg = <0x520 0x20>; |
| 392 | |
| 393 | phy0: ethernet-phy@1 { |
| 394 | interrupt-parent = <&mpic>; |
| 395 | interrupts = <8 1>; |
| 396 | reg = <0x1>; |
| 397 | }; |
| 398 | phy1: ethernet-phy@2 { |
| 399 | interrupt-parent = <&mpic>; |
| 400 | interrupts = <8 1>; |
| 401 | reg = <0x2>; |
| 402 | }; |
| 403 | tbi0: tbi-phy@11 { |
| 404 | reg = <0x11>; |
| 405 | device_type = "tbi-phy"; |
| 406 | }; |
| 407 | }; |
| 408 | }; |
| 409 | |
| 410 | /* eTSEC 2 */ |
| 411 | enet1: ethernet@25000 { |
| 412 | #address-cells = <1>; |
| 413 | #size-cells = <1>; |
| 414 | cell-index = <1>; |
| 415 | device_type = "network"; |
| 416 | model = "eTSEC"; |
| 417 | compatible = "gianfar"; |
| 418 | reg = <0x25000 0x1000>; |
| 419 | ranges = <0x0 0x25000 0x1000>; |
| 420 | local-mac-address = [ 00 00 00 00 00 00 ]; |
| 421 | interrupts = <35 2 36 2 40 2>; |
| 422 | interrupt-parent = <&mpic>; |
| 423 | tbi-handle = <&tbi1>; |
| 424 | phy-handle = <&phy1>; |
| 425 | phy-connection-type = "sgmii"; |
| 426 | |
| 427 | mdio@520 { |
| 428 | #address-cells = <1>; |
| 429 | #size-cells = <0>; |
| 430 | compatible = "fsl,gianfar-tbi"; |
| 431 | reg = <0x520 0x20>; |
| 432 | |
| 433 | tbi1: tbi-phy@11 { |
| 434 | reg = <0x11>; |
| 435 | device_type = "tbi-phy"; |
| 436 | }; |
| 437 | }; |
| 438 | }; |
| 439 | |
| 440 | /* UART0 */ |
| 441 | serial0: serial@4500 { |
| 442 | cell-index = <0>; |
| 443 | device_type = "serial"; |
| 444 | compatible = "ns16550"; |
| 445 | reg = <0x4500 0x100>; |
| 446 | clock-frequency = <0>; |
| 447 | interrupts = <42 2>; |
| 448 | interrupt-parent = <&mpic>; |
| 449 | }; |
| 450 | |
| 451 | /* UART1 */ |
| 452 | serial1: serial@4600 { |
| 453 | cell-index = <1>; |
| 454 | device_type = "serial"; |
| 455 | compatible = "ns16550"; |
| 456 | reg = <0x4600 0x100>; |
| 457 | clock-frequency = <0>; |
| 458 | interrupts = <42 2>; |
| 459 | interrupt-parent = <&mpic>; |
| 460 | }; |
| 461 | |
| 462 | global-utilities@e0000 { //global utilities block |
| 463 | compatible = "fsl,mpc8572-guts"; |
| 464 | reg = <0xe0000 0x1000>; |
| 465 | fsl,has-rstcr; |
| 466 | }; |
| 467 | |
| 468 | msi@41600 { |
| 469 | compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; |
| 470 | reg = <0x41600 0x80>; |
| 471 | msi-available-ranges = <0 0x100>; |
| 472 | interrupts = < |
| 473 | 0xe0 0 |
| 474 | 0xe1 0 |
| 475 | 0xe2 0 |
| 476 | 0xe3 0 |
| 477 | 0xe4 0 |
| 478 | 0xe5 0 |
| 479 | 0xe6 0 |
| 480 | 0xe7 0>; |
| 481 | interrupt-parent = <&mpic>; |
| 482 | }; |
| 483 | |
| 484 | crypto@30000 { |
| 485 | compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", |
| 486 | "fsl,sec2.1", "fsl,sec2.0"; |
| 487 | reg = <0x30000 0x10000>; |
| 488 | interrupts = <45 2 58 2>; |
| 489 | interrupt-parent = <&mpic>; |
| 490 | fsl,num-channels = <4>; |
| 491 | fsl,channel-fifo-len = <24>; |
| 492 | fsl,exec-units-mask = <0x9fe>; |
| 493 | fsl,descriptor-types-mask = <0x3ab0ebf>; |
| 494 | }; |
| 495 | |
| 496 | mpic: pic@40000 { |
| 497 | interrupt-controller; |
| 498 | #address-cells = <0>; |
| 499 | #interrupt-cells = <2>; |
| 500 | reg = <0x40000 0x40000>; |
| 501 | compatible = "chrp,open-pic"; |
| 502 | device_type = "open-pic"; |
| 503 | }; |
| 504 | |
| 505 | gpio0: gpio@f000 { |
| 506 | compatible = "fsl,mpc8572-gpio"; |
| 507 | reg = <0xf000 0x1000>; |
| 508 | interrupts = <47 2>; |
| 509 | interrupt-parent = <&mpic>; |
| 510 | #gpio-cells = <2>; |
| 511 | gpio-controller; |
| 512 | }; |
| 513 | |
| 514 | gpio-leds { |
| 515 | compatible = "gpio-leds"; |
| 516 | |
| 517 | heartbeat { |
| 518 | label = "Heartbeat"; |
| 519 | gpios = <&gpio0 4 1>; |
| 520 | linux,default-trigger = "heartbeat"; |
| 521 | }; |
| 522 | |
| 523 | yellow { |
| 524 | label = "Yellow"; |
| 525 | gpios = <&gpio0 5 1>; |
| 526 | }; |
| 527 | |
| 528 | red { |
| 529 | label = "Red"; |
| 530 | gpios = <&gpio0 6 1>; |
| 531 | }; |
| 532 | |
| 533 | green { |
| 534 | label = "Green"; |
| 535 | gpios = <&gpio0 7 1>; |
| 536 | }; |
| 537 | }; |
| 538 | |
| 539 | /* PME (pattern-matcher) */ |
| 540 | pme@10000 { |
| 541 | compatible = "fsl,mpc8572-pme", "pme8572"; |
| 542 | reg = <0x10000 0x5000>; |
| 543 | interrupts = <57 2 64 2 65 2 66 2 67 2>; |
| 544 | interrupt-parent = <&mpic>; |
| 545 | }; |
| 546 | |
| 547 | tlu@2f000 { |
| 548 | compatible = "fsl,mpc8572-tlu", "fsl_tlu"; |
| 549 | reg = <0x2f000 0x1000>; |
| 550 | interupts = <61 2 >; |
| 551 | interrupt-parent = <&mpic>; |
| 552 | }; |
| 553 | |
| 554 | tlu@15000 { |
| 555 | compatible = "fsl,mpc8572-tlu", "fsl_tlu"; |
| 556 | reg = <0x15000 0x1000>; |
| 557 | interupts = <75 2>; |
| 558 | interrupt-parent = <&mpic>; |
| 559 | }; |
| 560 | }; |
| 561 | |
| 562 | /* |
| 563 | * PCI Express controller 3 @ ef008000 is not used. |
| 564 | * This would have been pci0 on other mpc85xx platforms. |
| 565 | */ |
| 566 | |
| 567 | /* PCI Express controller 2, wired to XMC P15 connector */ |
| 568 | pci1: pcie@ef009000 { |
| 569 | compatible = "fsl,mpc8548-pcie"; |
| 570 | device_type = "pci"; |
| 571 | #interrupt-cells = <1>; |
| 572 | #size-cells = <2>; |
| 573 | #address-cells = <3>; |
| 574 | reg = <0 0xef009000 0 0x1000>; |
| 575 | bus-range = <0 255>; |
| 576 | ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 |
| 577 | 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; |
| 578 | clock-frequency = <33333333>; |
| 579 | interrupt-parent = <&mpic>; |
| 580 | interrupts = <25 2>; |
| 581 | interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| 582 | interrupt-map = < |
| 583 | /* IDSEL 0x0 */ |
| 584 | 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 |
| 585 | 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 |
| 586 | 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 |
| 587 | 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 |
| 588 | >; |
| 589 | pcie@0 { |
| 590 | reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; |
| 591 | #size-cells = <2>; |
| 592 | #address-cells = <3>; |
| 593 | device_type = "pci"; |
| 594 | ranges = <0x2000000 0x0 0xc0000000 |
| 595 | 0x2000000 0x0 0xc0000000 |
| 596 | 0x0 0x10000000 |
| 597 | |
| 598 | 0x1000000 0x0 0x0 |
| 599 | 0x1000000 0x0 0x0 |
| 600 | 0x0 0x100000>; |
| 601 | }; |
| 602 | }; |
| 603 | |
| 604 | /* PCI Express controller 1, wired to PEX8112 for PMC interface */ |
| 605 | pci2: pcie@ef00a000 { |
| 606 | compatible = "fsl,mpc8548-pcie"; |
| 607 | device_type = "pci"; |
| 608 | #interrupt-cells = <1>; |
| 609 | #size-cells = <2>; |
| 610 | #address-cells = <3>; |
| 611 | reg = <0 0xef00a000 0 0x1000>; |
| 612 | bus-range = <0 255>; |
| 613 | ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 |
| 614 | 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; |
| 615 | clock-frequency = <33333333>; |
| 616 | interrupt-parent = <&mpic>; |
| 617 | interrupts = <26 2>; |
| 618 | interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| 619 | interrupt-map = < |
| 620 | /* IDSEL 0x0 */ |
| 621 | 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 622 | 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 623 | 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 624 | 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 |
| 625 | >; |
| 626 | pcie@0 { |
| 627 | reg = <0x0 0x0 0x0 0x0 0x0>; |
| 628 | #size-cells = <2>; |
| 629 | #address-cells = <3>; |
| 630 | device_type = "pci"; |
| 631 | ranges = <0x2000000 0x0 0x80000000 |
| 632 | 0x2000000 0x0 0x80000000 |
| 633 | 0x0 0x40000000 |
| 634 | |
| 635 | 0x1000000 0x0 0x0 |
| 636 | 0x1000000 0x0 0x0 |
| 637 | 0x0 0x100000>; |
| 638 | }; |
| 639 | }; |
| 640 | }; |