blob: abef7596655a2dfc4c7a933b02c035dd98ed097b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
5 *
6 * Definitions of the socket-level I/O control calls.
7 *
8 * Version: @(#)sockios.h 1.0.2 03/09/93
9 *
Jesper Juhl02c30a82005-05-05 16:16:16 -070010 * Authors: Ross Biro
Linus Torvalds1da177e2005-04-16 15:20:36 -070011 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version
16 * 2 of the License, or (at your option) any later version.
17 */
18#ifndef _LINUX_SOCKIOS_H
19#define _LINUX_SOCKIOS_H
20
21#include <asm/sockios.h>
22
23/* Linux-specific socket ioctls */
24#define SIOCINQ FIONREAD
25#define SIOCOUTQ TIOCOUTQ
26
27/* Routing table calls. */
28#define SIOCADDRT 0x890B /* add routing table entry */
29#define SIOCDELRT 0x890C /* delete routing table entry */
30#define SIOCRTMSG 0x890D /* call to routing system */
31
32/* Socket configuration controls. */
33#define SIOCGIFNAME 0x8910 /* get iface name */
34#define SIOCSIFLINK 0x8911 /* set iface channel */
35#define SIOCGIFCONF 0x8912 /* get iface list */
36#define SIOCGIFFLAGS 0x8913 /* get flags */
37#define SIOCSIFFLAGS 0x8914 /* set flags */
38#define SIOCGIFADDR 0x8915 /* get PA address */
39#define SIOCSIFADDR 0x8916 /* set PA address */
40#define SIOCGIFDSTADDR 0x8917 /* get remote PA address */
41#define SIOCSIFDSTADDR 0x8918 /* set remote PA address */
42#define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */
43#define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */
44#define SIOCGIFNETMASK 0x891b /* get network PA mask */
45#define SIOCSIFNETMASK 0x891c /* set network PA mask */
46#define SIOCGIFMETRIC 0x891d /* get metric */
47#define SIOCSIFMETRIC 0x891e /* set metric */
48#define SIOCGIFMEM 0x891f /* get memory address (BSD) */
49#define SIOCSIFMEM 0x8920 /* set memory address (BSD) */
50#define SIOCGIFMTU 0x8921 /* get MTU size */
51#define SIOCSIFMTU 0x8922 /* set MTU size */
52#define SIOCSIFNAME 0x8923 /* set interface name */
53#define SIOCSIFHWADDR 0x8924 /* set hardware address */
54#define SIOCGIFENCAP 0x8925 /* get/set encapsulations */
55#define SIOCSIFENCAP 0x8926
56#define SIOCGIFHWADDR 0x8927 /* Get hardware address */
57#define SIOCGIFSLAVE 0x8929 /* Driver slaving support */
58#define SIOCSIFSLAVE 0x8930
59#define SIOCADDMULTI 0x8931 /* Multicast address lists */
60#define SIOCDELMULTI 0x8932
61#define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */
62#define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */
63#define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */
64#define SIOCGIFPFLAGS 0x8935
65#define SIOCDIFADDR 0x8936 /* delete PA address */
66#define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */
67#define SIOCGIFCOUNT 0x8938 /* get number of devices */
68
69#define SIOCGIFBR 0x8940 /* Bridging support */
70#define SIOCSIFBR 0x8941 /* Set bridging options */
71
72#define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */
73#define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */
74
Adrian Bunk90833aa2006-11-13 16:02:22 -080075/* SIOCGIFDIVERT was: 0x8944 Frame diversion support */
76/* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */
Linus Torvalds1da177e2005-04-16 15:20:36 -070077
78#define SIOCETHTOOL 0x8946 /* Ethtool interface */
79
80#define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */
81#define SIOCGMIIREG 0x8948 /* Read MII PHY register. */
82#define SIOCSMIIREG 0x8949 /* Write MII PHY register. */
83
84#define SIOCWANDEV 0x894A /* get/set netdev parameters */
85
86/* ARP cache control calls. */
87 /* 0x8950 - 0x8952 * obsolete calls, don't re-use */
88#define SIOCDARP 0x8953 /* delete ARP table entry */
89#define SIOCGARP 0x8954 /* get ARP table entry */
90#define SIOCSARP 0x8955 /* set ARP table entry */
91
92/* RARP cache control calls. */
93#define SIOCDRARP 0x8960 /* delete RARP table entry */
94#define SIOCGRARP 0x8961 /* get RARP table entry */
95#define SIOCSRARP 0x8962 /* set RARP table entry */
96
97/* Driver configuration calls */
98
99#define SIOCGIFMAP 0x8970 /* Get device parameters */
100#define SIOCSIFMAP 0x8971 /* Set device parameters */
101
102/* DLCI configuration calls */
103
104#define SIOCADDDLCI 0x8980 /* Create new DLCI device */
105#define SIOCDELDLCI 0x8981 /* Delete DLCI device */
106
107#define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */
108#define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */
109
110/* bonding calls */
111
112#define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */
113#define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/
114#define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */
115#define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */
116#define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */
117#define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */
118
119/* bridge calls */
120#define SIOCBRADDBR 0x89a0 /* create new bridge device */
121#define SIOCBRDELBR 0x89a1 /* remove bridge device */
122#define SIOCBRADDIF 0x89a2 /* add interface to bridge */
123#define SIOCBRDELIF 0x89a3 /* remove interface from bridge */
124
125/* Device private ioctl calls */
126
127/*
128 * These 16 ioctls are available to devices via the do_ioctl() device
129 * vector. Each device should include this file and redefine these names
130 * as their own. Because these are device dependent it is a good idea
131 * _NOT_ to issue them to random objects and hope.
132 *
133 * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
134 */
135
136#define SIOCDEVPRIVATE 0x89F0 /* to 89FF */
137
138/*
139 * These 16 ioctl calls are protocol private
140 */
141
142#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
143#endif /* _LINUX_SOCKIOS_H */