Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 1 | /* |
| 2 | * LP5562 LED driver |
| 3 | * |
| 4 | * Copyright (C) 2013 Texas Instruments |
| 5 | * |
| 6 | * Author: Milo(Woogyom) Kim <milo.kim@ti.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/firmware.h> |
| 15 | #include <linux/i2c.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/leds.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/mutex.h> |
| 20 | #include <linux/platform_data/leds-lp55xx.h> |
| 21 | #include <linux/slab.h> |
| 22 | |
| 23 | #include "leds-lp55xx-common.h" |
| 24 | |
| 25 | #define LP5562_PROGRAM_LENGTH 32 |
| 26 | #define LP5562_MAX_LEDS 4 |
| 27 | |
| 28 | /* ENABLE Register 00h */ |
| 29 | #define LP5562_REG_ENABLE 0x00 |
| 30 | #define LP5562_EXEC_ENG1_M 0x30 |
| 31 | #define LP5562_EXEC_ENG2_M 0x0C |
| 32 | #define LP5562_EXEC_ENG3_M 0x03 |
| 33 | #define LP5562_EXEC_M 0x3F |
| 34 | #define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */ |
| 35 | #define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ |
| 36 | #define LP5562_EXEC_RUN 0x2A |
| 37 | #define LP5562_ENABLE_DEFAULT \ |
| 38 | (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM) |
| 39 | #define LP5562_ENABLE_RUN_PROGRAM \ |
| 40 | (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN) |
| 41 | |
| 42 | /* OPMODE Register 01h */ |
| 43 | #define LP5562_REG_OP_MODE 0x01 |
| 44 | #define LP5562_MODE_ENG1_M 0x30 |
| 45 | #define LP5562_MODE_ENG2_M 0x0C |
| 46 | #define LP5562_MODE_ENG3_M 0x03 |
| 47 | #define LP5562_LOAD_ENG1 0x10 |
| 48 | #define LP5562_LOAD_ENG2 0x04 |
| 49 | #define LP5562_LOAD_ENG3 0x01 |
| 50 | #define LP5562_RUN_ENG1 0x20 |
| 51 | #define LP5562_RUN_ENG2 0x08 |
| 52 | #define LP5562_RUN_ENG3 0x02 |
| 53 | #define LP5562_ENG1_IS_LOADING(mode) \ |
| 54 | ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1) |
| 55 | #define LP5562_ENG2_IS_LOADING(mode) \ |
| 56 | ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2) |
| 57 | #define LP5562_ENG3_IS_LOADING(mode) \ |
| 58 | ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3) |
| 59 | |
| 60 | /* BRIGHTNESS Registers */ |
| 61 | #define LP5562_REG_R_PWM 0x04 |
| 62 | #define LP5562_REG_G_PWM 0x03 |
| 63 | #define LP5562_REG_B_PWM 0x02 |
| 64 | #define LP5562_REG_W_PWM 0x0E |
| 65 | |
| 66 | /* CURRENT Registers */ |
| 67 | #define LP5562_REG_R_CURRENT 0x07 |
| 68 | #define LP5562_REG_G_CURRENT 0x06 |
| 69 | #define LP5562_REG_B_CURRENT 0x05 |
| 70 | #define LP5562_REG_W_CURRENT 0x0F |
| 71 | |
| 72 | /* CONFIG Register 08h */ |
| 73 | #define LP5562_REG_CONFIG 0x08 |
Kim, Milo | 81f2a5b4 | 2013-03-20 17:37:04 -0700 | [diff] [blame] | 74 | #define LP5562_PWM_HF 0x40 |
| 75 | #define LP5562_PWRSAVE_EN 0x20 |
| 76 | #define LP5562_CLK_INT 0x01 /* Internal clock */ |
| 77 | #define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN) |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 78 | |
| 79 | /* RESET Register 0Dh */ |
| 80 | #define LP5562_REG_RESET 0x0D |
| 81 | #define LP5562_RESET 0xFF |
| 82 | |
| 83 | /* PROGRAM ENGINE Registers */ |
| 84 | #define LP5562_REG_PROG_MEM_ENG1 0x10 |
| 85 | #define LP5562_REG_PROG_MEM_ENG2 0x30 |
| 86 | #define LP5562_REG_PROG_MEM_ENG3 0x50 |
| 87 | |
| 88 | /* LEDMAP Register 70h */ |
| 89 | #define LP5562_REG_ENG_SEL 0x70 |
| 90 | #define LP5562_ENG_SEL_PWM 0 |
| 91 | #define LP5562_ENG_FOR_RGB_M 0x3F |
| 92 | #define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */ |
| 93 | #define LP5562_ENG_FOR_W_M 0xC0 |
| 94 | #define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */ |
| 95 | #define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */ |
| 96 | #define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */ |
| 97 | |
| 98 | /* Program Commands */ |
| 99 | #define LP5562_CMD_DISABLE 0x00 |
| 100 | #define LP5562_CMD_LOAD 0x15 |
| 101 | #define LP5562_CMD_RUN 0x2A |
| 102 | #define LP5562_CMD_DIRECT 0x3F |
| 103 | #define LP5562_PATTERN_OFF 0 |
| 104 | |
| 105 | static inline void lp5562_wait_opmode_done(void) |
| 106 | { |
| 107 | /* operation mode change needs to be longer than 153 us */ |
| 108 | usleep_range(200, 300); |
| 109 | } |
| 110 | |
| 111 | static inline void lp5562_wait_enable_done(void) |
| 112 | { |
| 113 | /* it takes more 488 us to update ENABLE register */ |
| 114 | usleep_range(500, 600); |
| 115 | } |
| 116 | |
| 117 | static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current) |
| 118 | { |
| 119 | u8 addr[] = { |
| 120 | LP5562_REG_R_CURRENT, |
| 121 | LP5562_REG_G_CURRENT, |
| 122 | LP5562_REG_B_CURRENT, |
| 123 | LP5562_REG_W_CURRENT, |
| 124 | }; |
| 125 | |
| 126 | led->led_current = led_current; |
| 127 | lp55xx_write(led->chip, addr[led->chan_nr], led_current); |
| 128 | } |
| 129 | |
| 130 | static void lp5562_load_engine(struct lp55xx_chip *chip) |
| 131 | { |
| 132 | enum lp55xx_engine_index idx = chip->engine_idx; |
| 133 | u8 mask[] = { |
| 134 | [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M, |
| 135 | [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M, |
| 136 | [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M, |
| 137 | }; |
| 138 | |
| 139 | u8 val[] = { |
| 140 | [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1, |
| 141 | [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2, |
| 142 | [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3, |
| 143 | }; |
| 144 | |
| 145 | lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]); |
| 146 | |
| 147 | lp5562_wait_opmode_done(); |
| 148 | } |
| 149 | |
| 150 | static void lp5562_stop_engine(struct lp55xx_chip *chip) |
| 151 | { |
| 152 | lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE); |
| 153 | lp5562_wait_opmode_done(); |
| 154 | } |
| 155 | |
| 156 | static void lp5562_run_engine(struct lp55xx_chip *chip, bool start) |
| 157 | { |
| 158 | int ret; |
| 159 | u8 mode; |
| 160 | u8 exec; |
| 161 | |
| 162 | /* stop engine */ |
| 163 | if (!start) { |
| 164 | lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT); |
| 165 | lp5562_wait_enable_done(); |
| 166 | lp5562_stop_engine(chip); |
| 167 | lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); |
| 168 | lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); |
| 169 | lp5562_wait_opmode_done(); |
| 170 | return; |
| 171 | } |
| 172 | |
| 173 | /* |
| 174 | * To run the engine, |
| 175 | * operation mode and enable register should updated at the same time |
| 176 | */ |
| 177 | |
| 178 | ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode); |
| 179 | if (ret) |
| 180 | return; |
| 181 | |
| 182 | ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec); |
| 183 | if (ret) |
| 184 | return; |
| 185 | |
| 186 | /* change operation mode to RUN only when each engine is loading */ |
| 187 | if (LP5562_ENG1_IS_LOADING(mode)) { |
| 188 | mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1; |
| 189 | exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1; |
| 190 | } |
| 191 | |
| 192 | if (LP5562_ENG2_IS_LOADING(mode)) { |
| 193 | mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2; |
| 194 | exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2; |
| 195 | } |
| 196 | |
| 197 | if (LP5562_ENG3_IS_LOADING(mode)) { |
| 198 | mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3; |
| 199 | exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3; |
| 200 | } |
| 201 | |
| 202 | lp55xx_write(chip, LP5562_REG_OP_MODE, mode); |
| 203 | lp5562_wait_opmode_done(); |
| 204 | |
| 205 | lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec); |
| 206 | lp5562_wait_enable_done(); |
| 207 | } |
| 208 | |
| 209 | static int lp5562_update_firmware(struct lp55xx_chip *chip, |
| 210 | const u8 *data, size_t size) |
| 211 | { |
| 212 | enum lp55xx_engine_index idx = chip->engine_idx; |
| 213 | u8 pattern[LP5562_PROGRAM_LENGTH] = {0}; |
| 214 | u8 addr[] = { |
| 215 | [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1, |
| 216 | [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2, |
| 217 | [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3, |
| 218 | }; |
| 219 | unsigned cmd; |
| 220 | char c[3]; |
| 221 | int program_size; |
| 222 | int nrchars; |
| 223 | int offset = 0; |
| 224 | int ret; |
| 225 | int i; |
| 226 | |
| 227 | /* clear program memory before updating */ |
| 228 | for (i = 0; i < LP5562_PROGRAM_LENGTH; i++) |
| 229 | lp55xx_write(chip, addr[idx] + i, 0); |
| 230 | |
| 231 | i = 0; |
| 232 | while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) { |
| 233 | /* separate sscanfs because length is working only for %s */ |
| 234 | ret = sscanf(data + offset, "%2s%n ", c, &nrchars); |
| 235 | if (ret != 1) |
| 236 | goto err; |
| 237 | |
| 238 | ret = sscanf(c, "%2x", &cmd); |
| 239 | if (ret != 1) |
| 240 | goto err; |
| 241 | |
| 242 | pattern[i] = (u8)cmd; |
| 243 | offset += nrchars; |
| 244 | i++; |
| 245 | } |
| 246 | |
| 247 | /* Each instruction is 16bit long. Check that length is even */ |
| 248 | if (i % 2) |
| 249 | goto err; |
| 250 | |
| 251 | program_size = i; |
| 252 | for (i = 0; i < program_size; i++) |
| 253 | lp55xx_write(chip, addr[idx] + i, pattern[i]); |
| 254 | |
| 255 | return 0; |
| 256 | |
| 257 | err: |
| 258 | dev_err(&chip->cl->dev, "wrong pattern format\n"); |
| 259 | return -EINVAL; |
| 260 | } |
| 261 | |
| 262 | static void lp5562_firmware_loaded(struct lp55xx_chip *chip) |
| 263 | { |
| 264 | const struct firmware *fw = chip->fw; |
| 265 | |
| 266 | if (fw->size > LP5562_PROGRAM_LENGTH) { |
| 267 | dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", |
| 268 | fw->size); |
| 269 | return; |
| 270 | } |
| 271 | |
| 272 | /* |
| 273 | * Program momery sequence |
| 274 | * 1) set engine mode to "LOAD" |
| 275 | * 2) write firmware data into program memory |
| 276 | */ |
| 277 | |
| 278 | lp5562_load_engine(chip); |
| 279 | lp5562_update_firmware(chip, fw->data, fw->size); |
| 280 | } |
| 281 | |
| 282 | static int lp5562_post_init_device(struct lp55xx_chip *chip) |
| 283 | { |
| 284 | int ret; |
Kim, Milo | 81f2a5b4 | 2013-03-20 17:37:04 -0700 | [diff] [blame] | 285 | u8 cfg = LP5562_DEFAULT_CFG; |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 286 | |
| 287 | /* Set all PWMs to direct control mode */ |
| 288 | ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); |
| 289 | if (ret) |
| 290 | return ret; |
| 291 | |
| 292 | lp5562_wait_opmode_done(); |
| 293 | |
Kim, Milo | 81f2a5b4 | 2013-03-20 17:37:04 -0700 | [diff] [blame] | 294 | /* Update configuration for the clock setting */ |
| 295 | if (!lp55xx_is_extclk_used(chip)) |
| 296 | cfg |= LP5562_CLK_INT; |
| 297 | |
| 298 | ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg); |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 299 | if (ret) |
| 300 | return ret; |
| 301 | |
| 302 | /* Initialize all channels PWM to zero -> leds off */ |
| 303 | lp55xx_write(chip, LP5562_REG_R_PWM, 0); |
| 304 | lp55xx_write(chip, LP5562_REG_G_PWM, 0); |
| 305 | lp55xx_write(chip, LP5562_REG_B_PWM, 0); |
| 306 | lp55xx_write(chip, LP5562_REG_W_PWM, 0); |
| 307 | |
| 308 | /* Set LED map as register PWM by default */ |
| 309 | lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); |
| 310 | |
| 311 | return 0; |
| 312 | } |
| 313 | |
| 314 | static void lp5562_led_brightness_work(struct work_struct *work) |
| 315 | { |
| 316 | struct lp55xx_led *led = container_of(work, struct lp55xx_led, |
| 317 | brightness_work); |
| 318 | struct lp55xx_chip *chip = led->chip; |
| 319 | u8 addr[] = { |
| 320 | LP5562_REG_R_PWM, |
| 321 | LP5562_REG_G_PWM, |
| 322 | LP5562_REG_B_PWM, |
| 323 | LP5562_REG_W_PWM, |
| 324 | }; |
| 325 | |
| 326 | mutex_lock(&chip->lock); |
| 327 | lp55xx_write(chip, addr[led->chan_nr], led->brightness); |
| 328 | mutex_unlock(&chip->lock); |
| 329 | } |
| 330 | |
| 331 | static void lp5562_write_program_memory(struct lp55xx_chip *chip, |
| 332 | u8 base, const u8 *rgb, int size) |
| 333 | { |
| 334 | int i; |
| 335 | |
| 336 | if (!rgb || size <= 0) |
| 337 | return; |
| 338 | |
| 339 | for (i = 0; i < size; i++) |
| 340 | lp55xx_write(chip, base + i, *(rgb + i)); |
| 341 | |
| 342 | lp55xx_write(chip, base + i, 0); |
| 343 | lp55xx_write(chip, base + i + 1, 0); |
| 344 | } |
| 345 | |
| 346 | /* check the size of program count */ |
| 347 | static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn) |
| 348 | { |
| 349 | return (ptn->size_r >= LP5562_PROGRAM_LENGTH || |
| 350 | ptn->size_g >= LP5562_PROGRAM_LENGTH || |
| 351 | ptn->size_b >= LP5562_PROGRAM_LENGTH); |
| 352 | } |
| 353 | |
| 354 | static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode) |
| 355 | { |
| 356 | struct lp55xx_predef_pattern *ptn; |
| 357 | int i; |
| 358 | |
| 359 | if (mode == LP5562_PATTERN_OFF) { |
| 360 | lp5562_run_engine(chip, false); |
| 361 | return 0; |
| 362 | } |
| 363 | |
| 364 | ptn = chip->pdata->patterns + (mode - 1); |
| 365 | if (!ptn || _is_pc_overflow(ptn)) { |
| 366 | dev_err(&chip->cl->dev, "invalid pattern data\n"); |
| 367 | return -EINVAL; |
| 368 | } |
| 369 | |
| 370 | lp5562_stop_engine(chip); |
| 371 | |
| 372 | /* Set LED map as RGB */ |
| 373 | lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB); |
| 374 | |
| 375 | /* Load engines */ |
| 376 | for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) { |
| 377 | chip->engine_idx = i; |
| 378 | lp5562_load_engine(chip); |
| 379 | } |
| 380 | |
| 381 | /* Clear program registers */ |
| 382 | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0); |
| 383 | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0); |
| 384 | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0); |
| 385 | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0); |
| 386 | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0); |
| 387 | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0); |
| 388 | |
| 389 | /* Program engines */ |
| 390 | lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1, |
| 391 | ptn->r, ptn->size_r); |
| 392 | lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2, |
| 393 | ptn->g, ptn->size_g); |
| 394 | lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3, |
| 395 | ptn->b, ptn->size_b); |
| 396 | |
| 397 | /* Run engines */ |
| 398 | lp5562_run_engine(chip, true); |
| 399 | |
| 400 | return 0; |
| 401 | } |
| 402 | |
| 403 | static ssize_t lp5562_store_pattern(struct device *dev, |
| 404 | struct device_attribute *attr, |
| 405 | const char *buf, size_t len) |
| 406 | { |
| 407 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
| 408 | struct lp55xx_chip *chip = led->chip; |
| 409 | struct lp55xx_predef_pattern *ptn = chip->pdata->patterns; |
| 410 | int num_patterns = chip->pdata->num_patterns; |
| 411 | unsigned long mode; |
| 412 | int ret; |
| 413 | |
| 414 | ret = kstrtoul(buf, 0, &mode); |
| 415 | if (ret) |
| 416 | return ret; |
| 417 | |
| 418 | if (mode > num_patterns || !ptn) |
| 419 | return -EINVAL; |
| 420 | |
| 421 | mutex_lock(&chip->lock); |
| 422 | ret = lp5562_run_predef_led_pattern(chip, mode); |
| 423 | mutex_unlock(&chip->lock); |
| 424 | |
| 425 | if (ret) |
| 426 | return ret; |
| 427 | |
| 428 | return len; |
| 429 | } |
| 430 | |
| 431 | static ssize_t lp5562_store_engine_mux(struct device *dev, |
| 432 | struct device_attribute *attr, |
| 433 | const char *buf, size_t len) |
| 434 | { |
| 435 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
| 436 | struct lp55xx_chip *chip = led->chip; |
| 437 | u8 mask; |
| 438 | u8 val; |
| 439 | |
| 440 | /* LED map |
| 441 | * R ... Engine 1 (fixed) |
| 442 | * G ... Engine 2 (fixed) |
| 443 | * B ... Engine 3 (fixed) |
| 444 | * W ... Engine 1 or 2 or 3 |
| 445 | */ |
| 446 | |
| 447 | if (sysfs_streq(buf, "RGB")) { |
| 448 | mask = LP5562_ENG_FOR_RGB_M; |
| 449 | val = LP5562_ENG_SEL_RGB; |
| 450 | } else if (sysfs_streq(buf, "W")) { |
| 451 | enum lp55xx_engine_index idx = chip->engine_idx; |
| 452 | |
| 453 | mask = LP5562_ENG_FOR_W_M; |
| 454 | switch (idx) { |
| 455 | case LP55XX_ENGINE_1: |
| 456 | val = LP5562_ENG1_FOR_W; |
| 457 | break; |
| 458 | case LP55XX_ENGINE_2: |
| 459 | val = LP5562_ENG2_FOR_W; |
| 460 | break; |
| 461 | case LP55XX_ENGINE_3: |
| 462 | val = LP5562_ENG3_FOR_W; |
| 463 | break; |
| 464 | default: |
| 465 | return -EINVAL; |
| 466 | } |
| 467 | |
| 468 | } else { |
| 469 | dev_err(dev, "choose RGB or W\n"); |
| 470 | return -EINVAL; |
| 471 | } |
| 472 | |
| 473 | mutex_lock(&chip->lock); |
| 474 | lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val); |
| 475 | mutex_unlock(&chip->lock); |
| 476 | |
| 477 | return len; |
| 478 | } |
| 479 | |
Milo Kim | daa124b | 2013-08-08 14:12:14 +0900 | [diff] [blame] | 480 | static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern); |
| 481 | static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux); |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 482 | |
| 483 | static struct attribute *lp5562_attributes[] = { |
| 484 | &dev_attr_led_pattern.attr, |
| 485 | &dev_attr_engine_mux.attr, |
| 486 | NULL, |
| 487 | }; |
| 488 | |
| 489 | static const struct attribute_group lp5562_group = { |
| 490 | .attrs = lp5562_attributes, |
| 491 | }; |
| 492 | |
| 493 | /* Chip specific configurations */ |
| 494 | static struct lp55xx_device_config lp5562_cfg = { |
| 495 | .max_channel = LP5562_MAX_LEDS, |
| 496 | .reset = { |
| 497 | .addr = LP5562_REG_RESET, |
| 498 | .val = LP5562_RESET, |
| 499 | }, |
| 500 | .enable = { |
| 501 | .addr = LP5562_REG_ENABLE, |
| 502 | .val = LP5562_ENABLE_DEFAULT, |
| 503 | }, |
| 504 | .post_init_device = lp5562_post_init_device, |
| 505 | .set_led_current = lp5562_set_led_current, |
| 506 | .brightness_work_fn = lp5562_led_brightness_work, |
| 507 | .run_engine = lp5562_run_engine, |
| 508 | .firmware_cb = lp5562_firmware_loaded, |
| 509 | .dev_attr_group = &lp5562_group, |
| 510 | }; |
| 511 | |
| 512 | static int lp5562_probe(struct i2c_client *client, |
| 513 | const struct i2c_device_id *id) |
| 514 | { |
| 515 | int ret; |
| 516 | struct lp55xx_chip *chip; |
| 517 | struct lp55xx_led *led; |
Kim, Milo | e015050 | 2013-05-07 00:14:49 -0700 | [diff] [blame] | 518 | struct lp55xx_platform_data *pdata; |
| 519 | struct device_node *np = client->dev.of_node; |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 520 | |
Jingoo Han | 87aae1e | 2013-07-30 01:07:35 -0700 | [diff] [blame] | 521 | if (!dev_get_platdata(&client->dev)) { |
Kim, Milo | e015050 | 2013-05-07 00:14:49 -0700 | [diff] [blame] | 522 | if (np) { |
| 523 | ret = lp55xx_of_populate_pdata(&client->dev, np); |
| 524 | if (ret < 0) |
| 525 | return ret; |
| 526 | } else { |
| 527 | dev_err(&client->dev, "no platform data\n"); |
| 528 | return -EINVAL; |
| 529 | } |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 530 | } |
Jingoo Han | 87aae1e | 2013-07-30 01:07:35 -0700 | [diff] [blame] | 531 | pdata = dev_get_platdata(&client->dev); |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 532 | |
| 533 | chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
| 534 | if (!chip) |
| 535 | return -ENOMEM; |
| 536 | |
| 537 | led = devm_kzalloc(&client->dev, |
| 538 | sizeof(*led) * pdata->num_channels, GFP_KERNEL); |
| 539 | if (!led) |
| 540 | return -ENOMEM; |
| 541 | |
| 542 | chip->cl = client; |
| 543 | chip->pdata = pdata; |
| 544 | chip->cfg = &lp5562_cfg; |
| 545 | |
| 546 | mutex_init(&chip->lock); |
| 547 | |
| 548 | i2c_set_clientdata(client, led); |
| 549 | |
| 550 | ret = lp55xx_init_device(chip); |
| 551 | if (ret) |
| 552 | goto err_init; |
| 553 | |
| 554 | ret = lp55xx_register_leds(led, chip); |
| 555 | if (ret) |
| 556 | goto err_register_leds; |
| 557 | |
| 558 | ret = lp55xx_register_sysfs(chip); |
| 559 | if (ret) { |
| 560 | dev_err(&client->dev, "registering sysfs failed\n"); |
| 561 | goto err_register_sysfs; |
| 562 | } |
| 563 | |
| 564 | return 0; |
| 565 | |
| 566 | err_register_sysfs: |
| 567 | lp55xx_unregister_leds(led, chip); |
| 568 | err_register_leds: |
| 569 | lp55xx_deinit_device(chip); |
| 570 | err_init: |
| 571 | return ret; |
| 572 | } |
| 573 | |
| 574 | static int lp5562_remove(struct i2c_client *client) |
| 575 | { |
| 576 | struct lp55xx_led *led = i2c_get_clientdata(client); |
| 577 | struct lp55xx_chip *chip = led->chip; |
| 578 | |
| 579 | lp5562_stop_engine(chip); |
| 580 | |
| 581 | lp55xx_unregister_sysfs(chip); |
| 582 | lp55xx_unregister_leds(led, chip); |
| 583 | lp55xx_deinit_device(chip); |
| 584 | |
| 585 | return 0; |
| 586 | } |
| 587 | |
| 588 | static const struct i2c_device_id lp5562_id[] = { |
| 589 | { "lp5562", 0 }, |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 590 | { } |
| 591 | }; |
| 592 | MODULE_DEVICE_TABLE(i2c, lp5562_id); |
| 593 | |
Axel Lin | 28720cf | 2013-05-08 21:49:37 -0700 | [diff] [blame] | 594 | #ifdef CONFIG_OF |
| 595 | static const struct of_device_id of_lp5562_leds_match[] = { |
| 596 | { .compatible = "ti,lp5562", }, |
| 597 | {}, |
| 598 | }; |
| 599 | |
| 600 | MODULE_DEVICE_TABLE(of, of_lp5562_leds_match); |
| 601 | #endif |
| 602 | |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 603 | static struct i2c_driver lp5562_driver = { |
| 604 | .driver = { |
| 605 | .name = "lp5562", |
Axel Lin | 28720cf | 2013-05-08 21:49:37 -0700 | [diff] [blame] | 606 | .of_match_table = of_match_ptr(of_lp5562_leds_match), |
Kim, Milo | ff45262a | 2013-02-18 21:10:14 -0800 | [diff] [blame] | 607 | }, |
| 608 | .probe = lp5562_probe, |
| 609 | .remove = lp5562_remove, |
| 610 | .id_table = lp5562_id, |
| 611 | }; |
| 612 | |
| 613 | module_i2c_driver(lp5562_driver); |
| 614 | |
| 615 | MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver"); |
| 616 | MODULE_AUTHOR("Milo Kim"); |
| 617 | MODULE_LICENSE("GPL"); |