blob: a1c670fc1552f32f93f16e25c5fe7c143a2b13d4 [file] [log] [blame]
Larry Fingera0270872009-04-16 19:56:38 -05001/*
2 * Linux LED driver for RTL8187
3 *
4 * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
5 *
6 * Based on the LED handling in the r8187 driver, which is:
7 * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
8 *
9 * Thanks to Realtek for their support!
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16#ifdef CONFIG_RTL8187_LEDS
17
18#include <net/mac80211.h>
19#include <linux/usb.h>
20#include <linux/eeprom_93cx6.h>
21
22#include "rtl8187.h"
23#include "rtl8187_leds.h"
24
25static void led_turn_on(struct work_struct *work)
26{
27 /* As this routine does read/write operations on the hardware, it must
28 * be run from a work queue.
29 */
30 u8 reg;
31 struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
32 led_on.work);
33 struct rtl8187_led *led = &priv->led_tx;
34
35 /* Don't change the LED, when the device is down. */
36 if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
37 return ;
38
39 /* Skip if the LED is not registered. */
40 if (!led->dev)
41 return;
42 mutex_lock(&priv->conf_mutex);
43 switch (led->ledpin) {
44 case LED_PIN_GPIO0:
Herton Ronaldo Krzesinskica9152e2009-08-26 13:54:09 -030045 rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
Larry Fingera0270872009-04-16 19:56:38 -050046 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
47 break;
48 case LED_PIN_LED0:
49 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
50 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
51 break;
52 case LED_PIN_LED1:
53 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
54 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
55 break;
56 case LED_PIN_HW:
57 default:
58 break;
59 }
60 mutex_unlock(&priv->conf_mutex);
61}
62
63static void led_turn_off(struct work_struct *work)
64{
65 /* As this routine does read/write operations on the hardware, it must
66 * be run from a work queue.
67 */
68 u8 reg;
69 struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
70 led_off.work);
71 struct rtl8187_led *led = &priv->led_tx;
72
73 /* Don't change the LED, when the device is down. */
74 if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
75 return ;
76
77 /* Skip if the LED is not registered. */
78 if (!led->dev)
79 return;
80 mutex_lock(&priv->conf_mutex);
81 switch (led->ledpin) {
82 case LED_PIN_GPIO0:
Herton Ronaldo Krzesinskica9152e2009-08-26 13:54:09 -030083 rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
Larry Fingera0270872009-04-16 19:56:38 -050084 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
85 break;
86 case LED_PIN_LED0:
87 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
88 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
89 break;
90 case LED_PIN_LED1:
91 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
92 rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
93 break;
94 case LED_PIN_HW:
95 default:
96 break;
97 }
98 mutex_unlock(&priv->conf_mutex);
99}
100
101/* Callback from the LED subsystem. */
102static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
103 enum led_brightness brightness)
104{
105 struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
106 led_dev);
107 struct ieee80211_hw *hw = led->dev;
108 struct rtl8187_priv *priv = hw->priv;
109
110 if (brightness == LED_OFF) {
Luis R. Rodriguez42935ec2009-07-29 20:08:07 -0400111 ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
Larry Fingera0270872009-04-16 19:56:38 -0500112 /* The LED is off for 1/20 sec so that it just blinks. */
Luis R. Rodriguez42935ec2009-07-29 20:08:07 -0400113 ieee80211_queue_delayed_work(hw, &priv->led_on, HZ / 20);
Larry Fingera0270872009-04-16 19:56:38 -0500114 } else
Luis R. Rodriguez42935ec2009-07-29 20:08:07 -0400115 ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
Larry Fingera0270872009-04-16 19:56:38 -0500116}
117
118static int rtl8187_register_led(struct ieee80211_hw *dev,
119 struct rtl8187_led *led, const char *name,
120 const char *default_trigger, u8 ledpin)
121{
122 int err;
123 struct rtl8187_priv *priv = dev->priv;
124
125 if (led->dev)
126 return -EEXIST;
127 if (!default_trigger)
128 return -EINVAL;
129 led->dev = dev;
130 led->ledpin = ledpin;
131 strncpy(led->name, name, sizeof(led->name));
132
133 led->led_dev.name = led->name;
134 led->led_dev.default_trigger = default_trigger;
135 led->led_dev.brightness_set = rtl8187_led_brightness_set;
136
137 err = led_classdev_register(&priv->udev->dev, &led->led_dev);
138 if (err) {
139 printk(KERN_INFO "LEDs: Failed to register %s\n", name);
140 led->dev = NULL;
141 return err;
142 }
143 return 0;
144}
145
146static void rtl8187_unregister_led(struct rtl8187_led *led)
147{
148 led_classdev_unregister(&led->led_dev);
149 led->dev = NULL;
150}
151
152void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
153{
154 struct rtl8187_priv *priv = dev->priv;
155 char name[RTL8187_LED_MAX_NAME_LEN + 1];
156 u8 ledpin;
157 int err;
158
159 /* According to the vendor driver, the LED operation depends on the
160 * customer ID encoded in the EEPROM
161 */
162 printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
163 switch (custid) {
164 case EEPROM_CID_RSVD0:
165 case EEPROM_CID_RSVD1:
166 case EEPROM_CID_SERCOMM_PS:
167 case EEPROM_CID_QMI:
168 case EEPROM_CID_DELL:
169 case EEPROM_CID_TOSHIBA:
170 ledpin = LED_PIN_GPIO0;
171 break;
172 case EEPROM_CID_ALPHA0:
173 ledpin = LED_PIN_LED0;
174 break;
175 case EEPROM_CID_HW:
176 ledpin = LED_PIN_HW;
177 break;
178 default:
179 ledpin = LED_PIN_GPIO0;
180 }
181
182 INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
183 INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
184
185 snprintf(name, sizeof(name),
186 "rtl8187-%s::tx", wiphy_name(dev->wiphy));
187 err = rtl8187_register_led(dev, &priv->led_tx, name,
188 ieee80211_get_tx_led_name(dev), ledpin);
189 if (err)
190 goto error;
191 snprintf(name, sizeof(name),
192 "rtl8187-%s::rx", wiphy_name(dev->wiphy));
193 err = rtl8187_register_led(dev, &priv->led_rx, name,
194 ieee80211_get_rx_led_name(dev), ledpin);
195 if (!err) {
Luis R. Rodriguez42935ec2009-07-29 20:08:07 -0400196 ieee80211_queue_delayed_work(dev, &priv->led_on, 0);
Larry Fingera0270872009-04-16 19:56:38 -0500197 return;
198 }
199 /* registration of RX LED failed - unregister TX */
200 rtl8187_unregister_led(&priv->led_tx);
201error:
202 /* If registration of either failed, cancel delayed work */
203 cancel_delayed_work_sync(&priv->led_off);
204 cancel_delayed_work_sync(&priv->led_on);
205}
206
207void rtl8187_leds_exit(struct ieee80211_hw *dev)
208{
209 struct rtl8187_priv *priv = dev->priv;
210
Larry Fingera0270872009-04-16 19:56:38 -0500211 /* turn the LED off before exiting */
Luis R. Rodriguez42935ec2009-07-29 20:08:07 -0400212 ieee80211_queue_delayed_work(dev, &priv->led_off, 0);
Larry Fingera0270872009-04-16 19:56:38 -0500213 cancel_delayed_work_sync(&priv->led_off);
Larry Finger3da74292009-07-14 15:55:16 -0500214 cancel_delayed_work_sync(&priv->led_on);
Larry Fingera0270872009-04-16 19:56:38 -0500215 rtl8187_unregister_led(&priv->led_rx);
Larry Finger3da74292009-07-14 15:55:16 -0500216 rtl8187_unregister_led(&priv->led_tx);
Larry Fingera0270872009-04-16 19:56:38 -0500217}
218#endif /* def CONFIG_RTL8187_LED */
219